Mike Bernhardt wrote:
"It doesn't work" referred to the original question I posted with the same subject a few weeks ago. At that time I provided debug output.
Ah... that's the "failed creating proxy socket" issue. Weird.
I tried this configuration with 2.1.7 and 2.1.8 but it "didn't work" in that the request never left freeradius for the downstream server. After I installed 2.1.4, it worked as it should without changing anything else. I will try reinstalling 2.1.8 just for fun and see if it behaves this time. If it doesn't, I'll stick with 2.1.4 and send you my config files.
OK. If 2.1.8 didn't work 2 weeks ago, re-installing it will likely not help.
As far as status checks, the authentication pings will work fine. I see now that they only kick in when a server is marked dead. If I can figure out how to shorten the time before it is marked dead I'll be very satisfied with that setup.
raddb/proxy.conf. All of the configuration items are documented there. Be aware, though, that 2.1.8 makes these work better than 2.1.4. Alan DeKok.