adreas Polyxronopoulos wrote:
rad_recv: Access-Request packet from host 10.0.0.10:3794, id=160, length=132 NAS-IP-Address = 10.0.0.10 NAS-Port-Type = Wireless-802.11 NAS-Port = 1 Framed-MTU = 1400 User-Name = "someone" Calling-Station-Id = "00166f122595" Called-Station-Id = "000d545c4190" NAS-Identifier = "3Com Access Point" EAP-Message = 0x0201000c01736f6d656f6e65 Message-Authenticator = 0x160e121c6c28afb7f18ee9f0862390d0 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 0 modcall[authorize]: module "preprocess" returns ok for request 0 modcall[authorize]: module "mschap" returns noop for request 0 rlm_realm: No '@' in User-Name = "someone", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 0 rlm_eap: EAP packet type response id 1 length 12 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 0 users: Matched entry DEFAULT at line 155 users: Matched entry someone at line 219 modcall[authorize]: module "files" returns ok for request 0 modcall: leaving group authorize (returns updated) for request 0 rad_check_password: Found Auth-Type Local
Don't set Auth-Type to Local. Don't set it to anything in fact. In 99% of cases, a correctly configured server will set it just fine itself, and attempting to fiddle with it will break things. Most likely one of the two entries in the "users" file in line 155 or 219 is causing it to break. Your users file only needs: username User-Password := "thepassword"