RE: preprocess module

10 Jan 2011

      I removed it because it deals with cases I'll never have...ppp, slip, cslip.  No, it's not doing anything "bad", but it's not doing anything "helpful" either.  You're 100% right, I can just put them back.  Just trying to understand why the config file isn't doing what it's told.

--Brian

-----Original Message-----
From: freeradius-users-bounces+bmccann=andmore.com@lists.freeradius.org [mailto:freeradius-users-bounces+bmccann=andmore.com@lists.freeradius.org] On Behalf Of Tim Sylvester
Sent: Monday, January 10, 2011 5:13 PM
To: 'FreeRadius users mailing list'
Subject: RE: preprocess module

Why did you remove the files? Unless they are doing something "bad", leave
them alone.

Tim
...
-----Original Message-----
From: freeradius-users-
bounces+tim.sylvester=networkradius.com@lists.freeradius.org
[mailto:freeradius-users-
bounces+tim.sylvester=networkradius.com@lists.freeradius.org] On Behalf
Of McCann, Brian
Sent: Monday, January 10, 2011 1:49 PM
To: FreeRadius users mailing list
Subject: RE: preprocess module
It's worth mentioning that if I change "ascend_channels_per_line" to
"32" instead of "23", that change gets recognized.
--Brian
-----Original Message-----
From: freeradius-users-bounces+bmccann=andmore.com@lists.freeradius.org
[mailto:freeradius-users-
bounces+bmccann=andmore.com@lists.freeradius.org] On Behalf Of McCann,
Brian
Sent: Monday, January 10, 2011 4:45 PM
To: freeradius-users@lists.freeradius.org
Subject: preprocess module
Hi all.  Trying to understand and learn freeradius.  For my use, I do
not need the "huntgroups" or "hints" files, so I tried taking them out.
I renamed the files from "huntgroups" to "huntgroups.off", and the same
for hints.  I then edited "module/preprocess" to take out references to
these two files.  However, when I start up radiusd, it appears that
it's STILL looking for the files.  I've gone so far as doing a "grep -
ir huntgroup *", and every line it comes back with is commented out.
Here's the debug and my modules/preprocess file:
--debug start--
server { # from file /usr/local/etc/raddb/radiusd.conf
 modules {
 Module: Checking authenticate {...} for more modules to load
 Module: Checking authorize {...} for more modules to load
 Module: Linked to module rlm_preprocess
 Module: Instantiating module "preprocess" from file
/usr/local/etc/raddb/modules/preprocess
  preprocess {
        huntgroups = "/usr/local/etc/raddb/huntgroups"
        hints = "/usr/local/etc/raddb/hints"
        with_ascend_hack = no
        ascend_channels_per_line = 23
        with_ntdomain_hack = no
        with_specialix_jetstream_hack = no
        with_cisco_vsa_hack = no
        with_alvarion_vsa_hack = no
  }
rlm_preprocess: Error reading /usr/local/etc/raddb/huntgroups
/usr/local/etc/raddb/modules/preprocess[13]: Instantiation failed for
module "preprocess"
/usr/local/etc/raddb/sites-enabled/default[9]: Failed to load module
"preprocess".
/usr/local/etc/raddb/sites-enabled/default[1]: Errors parsing authorize
section.
--debug end--
--preprocess start--
preprocess {
   with_ascend_hack = no
   ascend_channels_per_line = 23
   with_ntdomain_hack = no
   with_specialix_jetstream_hack = no
   with_cisco_vsa_hack = no
}
--preprocess end--
Anyone have any ideas on where it's getting this configuration from???
Thanks!
--Brian
-
List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html
-
List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html