On 13 Sep 2016, at 07:32, Jiang Jianping <brightcove@foxmail.com> wrote:
Version: freeradius-server-3.0.11 Environment: gnugk->radius server(local relay)->radius accouting server Module: Relay Server: Accouting with detail, Accounting Server: Accouting with linelog
Issue: Special characters（UTF-8 other than Ascii) wil cause radius server not response to accounting request
Accounting record on Relay Server: Tue Sep 6 19:50:10 2016 Acct-Status-Type = Stop NAS-IP-Address = 123.59.170.71 NAS-Identifier = "GnuGk" NAS-Port-Type = Virtual Service-Type = Login-User Acct-Session-Id = "57c11224000006a2" User-Name = "諞\275丿\255" Framed-IP-Address = 111.23.46.106 Acct-Session-Time = 38 Calling-Station-Id = "諞\275丿\255" Called-Station-Id = "1935" h323-conf-id = "h323-conf-id=E04D5EB6 4C02001F 14FDCE5 BA6BC861" h323-gw-id = "h323-gw-id=GnuGk" h323-call-origin = "h323-call-origin=proxy" h323-call-type = "h323-call-type=VoIP" h323-setup-time = "h323-setup-time=2016-09-06 19:49:32 UTC+0800" h323-connect-time = "h323-connect-time=2016-09-06 19:49:32 UTC+0800" h323-disconnect-time = "h323-disconnect-time=2016-09-06 19:50:10 UTC+0800" h323-disconnect-cause = "h323-disconnect-cause=10" release-source = "release-source=1" gw-rxd-cgn = "preferred-codec=Unknown" gw-final-xlated-cgn = "rewritten-e164-num=1935" Cisco-AVPair = "h323pddtime=0" Cisco-AVPair = "h323ringtime=0" Cisco-AVPair = "h323routeattempts=0" Cisco-AVPair = "h323_rtp_proxy=1" Cisco-AVPair = "RTP_source_IP=123.59.170.86" Cisco-AVPair = "RTP_destination_IP=111.23.46.106" Cisco-AVPair = "RTCP_source_packet_count=0" Cisco-AVPair = "RTCP_source_packet_lost=0" Cisco-AVPair = "RTCP_source_jitter=0|0|0" Cisco-AVPair = "RTCP_destination_packet_count=0" Cisco-AVPair = "RTCP_destination_packet_lost=0" Cisco-AVPair = "RTCP_destination_jitter=0|0|0" h323-remote-address = "h323-remote-address=123.59.170.95" Cisco-AVPair = "h323-ivr-out=h323-call-id:373B5EB6 4C02001F 14FDCE5 BA6BC861" Acct-Delay-Time = 0 Realm = "radrelay" Module-Failure-Message = "Failing proxied request for user \"諞\275丿\255\", due to lack of any response from home server 10.10.10.22 port 1813" Freeradius-Proxied-To = 10.10.10.22 Timestamp = 1473162610
Linelog Configuration: Accounting-Request { Stop = "CDR:type=h323;%{h323-connect-time};%{h323-disconnect-time};duration=%{Acct-Session-Time};sessionid=%{Acct-Session-Id};caller=%{Calling-Station- Id};callee=%{Called-Station-Id};sourceip=%{Framed-IP-Address}" }
Radius Accouting Server Halted at (with -X option:)
(131) # Executing section accounting from file /opt/zjcloud/conf/raddb/radiusd.conf (131) accounting { (131) linelog: EXPAND Accounting-Request.%{%{Acct-Status-Type}:-unknown} (131) linelog: --> Accounting-Request.Stop (131) linelog: EXPAND /var/zjcloud/CDR/cdr-%Y%m%d%H (131) linelog: --> /var/zjcloud/CDR/cdr-2016091316
Yes, we saw the issue ticket... The problem is you deleted the template issue request, and failed to provide us with the information we need to fix the problem... We need you to run the server under a debugger and see exactly where it hangs. -Arran Arran Cudbard-Bell <a.cudbardb@freeradius.org> FreeRADIUS Development Team FD31 3077 42EC 7FCD 32FE 5EE2 56CF 27F9 30A8 CAA2