Krzysztof Olędzki wrote:
OK, we absolutely need some more info:
- display vlan - display vlan ... (2?) - display interface ... (G7/0/40?) - display port-security interface ... (G7/0/40) Hi,Krzysztof
Viktor Guk wrote: <skip>
All too most, only with the letter "G". [5500G-EI]disp vlan The following VLANs exist: 1(default), 2
[5500G-EI]disp vlan 2 VLAN ID: 2 VLAN Type: static Route Interface: not configured Description: vlan2 Name: vlan2 Tagged Ports: none Untagged Ports: GigabitEthernet7/0/39 GigabitEthernet7/0/47
[5500G-EI]display interface GigabitEthernet 7/0/40 GigabitEthernet7/0/40 current state : DOWN IP Sending Frames' Format is PKTFMT_ETHNT_2, Hardware address is 001a-c147-8e68 Media type is twisted pair, loopback not set Port hardware type is 1000_BASE_T Unknown-speed mode, unknown-duplex mode Link speed type is autonegotiation, link duplex type is autonegotiation Flow-control is not enabled The Maximum Frame Length is 1522 Broadcast MAX-pps: 3000 Unicast MAX-ratio: 100% Multicast MAX-ratio: 100% Forbid jumbo frame to pass PVID: 1 Mdi type: auto Port link-type: access Tagged VLAN ID : none Untagged VLAN ID : 1 Last 300 seconds input: 0 packets/sec 7 bytes/sec Last 300 seconds output: 0 packets/sec 48 bytes/sec Input(total): 23 packets, 2240 bytes 2 broadcasts, 12 multicasts, 0 pauses Input(normal): - packets, - bytes - broadcasts, - multicasts, - pauses Input: 0 input errors, 0 runts, 0 giants, - throttles, 0 CRC - frame, - overruns, 0 aborts, - ignored, - parity errors Output(total): 151 packets, 14501 bytes 89 broadcasts, 50 multicasts, 0 pauses Output(normal): - packets, - bytes - broadcasts, - multicasts, - pauses Output: 0 output errors, - underruns, - buffer failures 0 aborts, 0 deferred, 0 collisions, 0 late collisions 0 lost carrier, - no carrier
[5500G-EI]display port-security interface GigabitEthernet 7/0/40 GigabitEthernet7/0/40 is link-down Port mode is noRestriction NeedtoKnow mode is disabled Intrusion mode is no action Max mac-address num is not configured Stored mac-address num is 0 Authorization is permit
With the options offered by you the stand too has not earned
BTW: There is no need to add and use TMT802, freeradius already comes with all what you need here:
Tunnel-Type = VLAN Tunnel-Medium-Type = IEEE-802 Tunnel-Private-Group-ID = ...
Best regards,
Krzysztof Olędzki
Best regards. Gennadii Redko