Re:Re Can't get the value of 'Digest-User-name', 'Digest-Realm', 'Digest-Method', 'Digest-Uri', 'Digest-Nonce', 'Digest-Response'

5 May 2008


      ...
Please tell me the possible problems of not getting these values:
'Digest-User-name', 'Digest-Realm',   'Digest-Method', 'Digest-Uri',
'Digest-Nonce',   'Digest-Response'
here is the full output when I run in debug mode
rad_recv: Access-Request packet from host 192.168.1.227 port 33093, id=86,
length=271
       User-Name = "johnson@192.168.1.227"
       Digest-Attributes = 0x0a096a6f686e736f6e
       Digest-Attributes = 0x010f3139322e3136382e312e323237
       Digest-Attributes =
0x022a34383166353136663737396231653364366365313331653738656462346265393931356634386439
       Digest-Attributes = 0x04137369703a3139322e3136382e312e323237
       Digest-Attributes = 0x030a5245474953544552
       Digest-Response = "b8f4759b0c4462aaa56edd1794da872a"
       Service-Type = Sip-Session
       Sip-Uri-User = "johnson"
       Cisco-AVPair = "call-id=
bf4f8d7607dc4f4aa0e7aacff499141c@192.168.1.193"
       NAS-IP-Address = 127.0.0.1
       NAS-Port = 5060
Good. Now you are getting Digest-Attributes. Now uncomment digest entry
in authorize section of default or whatever virtual server is processing
this.

Ivan Kalik
Kalik Informatika ISP