Hi again all, sorry for spamming the list. I have two questions regarding EAP an REALM, realm first. In every request i get: rlm_realm: No '@' in User-Name = "00-17-f2-ea-b1-3e", looking up realm NULL rlm_realm: No such realm "NULL" I wonder what that mean if/how to turn that off? Or should i even care? EAP: I'm trying to get EAP working with my Proxim AP4000. When i auth. i get (Everything works great thou, but i want the "secure line" between NAS and server (If i got it right? I don't like clear text.)): rad_recv: Access-Request packet from host 10.0.5.200:6001, id=4, length=151 User-Name = "00-17-f2-ea-b1-3e" User-Password = "00-17-f2-ea-b1-3e" NAS-IP-Address = 10.0.5.200 Called-Station-Id = "00-20-a6-6f-93-bf:My Wireless Network B" Calling-Station-Id = "00-17-f2-ea-b1-3e" NAS-Port = 9 NAS-Port-Type = Wireless-802.11 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 0 modcall[authorize]: module "preprocess" returns ok for request 0 modcall[authorize]: module "chap" returns noop for request 0 modcall[authorize]: module "mschap" returns noop for request 0 rlm_realm: No '@' in User-Name = "00-17-f2-ea-b1-3e", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 0 rlm_eap: No EAP-Message, not doing EAP modcall[authorize]: module "eap" returns noop for request 0 users: Matched entry 00-17-f2-ea-b1-3e at line 96 modcall[authorize]: module "files" returns ok for request 0 modcall[authorize]: module "pap" returns updated for request 0 modcall: leaving group authorize (returns updated) for request 0 rad_check_password: Found Auth-Type pap auth: type "PAP" Processing the authenticate section of radiusd.conf modcall: entering group PAP for request 0 rlm_pap: login attempt with password 00-17-f2-ea-b1-3e rlm_pap: Using clear text password "00-17-f2-ea-b1-3e". rlm_pap: User authenticated successfully modcall[authenticate]: module "pap" returns ok for request 0 modcall: leaving group PAP (returns ok) for request 0 Sending Access-Accept of id 4 to 10.0.5.200 port 6001 Calling-Station-Id == "00-17-f2-ea-b1-3e" NAS-IP-Address = 82.182.120.201 Called-Station-Id = "00-20-a6-6f-93-bf:My Wireless Network B" NAS-Port = 9 NAS-Port-Type = Wireless-802.11 Service-Type = Framed-User Framed-Routing = Broadcast-Listen Finished request 0 Going to the next request --- Walking the entire request list --- Waking up in 6 seconds.. Does that mean that AP4000 doesn't sends a EAP-request or is my config somehow broken? Is there any way to tell? I Tried make my own cerificates with CA.all in the script folder, but i got stuck on one place: error while loading serial number I read somewhere that i could put a file in demoCA-folder with numbers in but that doesn't work, the file serial "disappears" and the same error comes up. Anyone solved this? Error-message: + openssl ca -policy policy_anything -out newcert.pem -passin pass:whatever -key whatever -extensions xpserver_ext -extfile xpextensions -infiles newreq.pem Using configuration from /usr/local/ssl/openssl.cnf ./demoCA/serial: No such file or directory error while loading serial number 31237:error:02001002:system library:fopen:No such file or directory:bss_file.c:352:fopen('./demoCA/serial','r') 31237:error:20074002:BIO routines:FILE_CTRL:system lib:bss_file.c:354: + openssl pkcs12 -export -in newcert.pem -inkey newreq.pem -out cert- srv.p12 -clcerts -passin pass:whatever -passout pass:whatever No certificate matches private key + openssl pkcs12 -in cert-srv.p12 -out cert-srv.pem -passin pass:whatever -passout pass:whatever 31239:error:0D07207B:asn1 encoding routines:ASN1_get_object:header too long:asn1_lib.c:150: + openssl x509 -inform PEM -outform DER -in cert-srv.pem -out cert- srv.der unable to load certificate 31240:error:0906D06C:PEM routines:PEM_read_bio:no start line:pem_lib.c:647:Expecting: TRUSTED CERTIFICATE + echo -e '\n\t\t##################\n' Again; Many thx for all help! p Startup info (Yes, i know the EAP WARNINGS but i can't even get an eap-message/error): debian:~# /usr/sbin/radiusd -v radiusd: FreeRADIUS Version 1.1.7, for host powerpc-unknown-linux- gnu, built on Sep 15 2007 at 09:59:30 Copyright (C) 2000-2007 The FreeRADIUS server project. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License. For more information about these matters, see the file named COPYRIGHT. debian:~# /usr/sbin/radiusd -X -f -d /etc/raddb/ Starting - reading configuration files ... reread_config: reading radiusd.conf Config: including file: /etc/raddb/proxy.conf Config: including file: /etc/raddb/clients.conf Config: including file: /etc/raddb/snmp.conf Config: including file: /etc/raddb/eap.conf Config: including file: /etc/raddb/sql.conf main: prefix = "/usr" main: localstatedir = "/var" main: logdir = "/var/log/radius" main: libdir = "/usr/lib" main: radacctdir = "/var/log/radius/radacct" main: hostname_lookups = no main: max_request_time = 30 main: cleanup_delay = 5 main: max_requests = 1024 main: delete_blocked_requests = 0 main: port = 0 main: allow_core_dumps = no main: log_stripped_names = no main: log_file = "/var/log/radius/radius.log" main: log_auth = no main: log_auth_badpass = no main: log_auth_goodpass = no main: pidfile = "/var/run/radiusd/radiusd.pid" main: user = "(null)" main: group = "(null)" main: usercollide = no main: lower_user = "no" main: lower_pass = "no" main: nospace_user = "no" main: nospace_pass = "no" main: checkrad = "/usr/checkrad" main: proxy_requests = yes proxy: retry_delay = 5 proxy: retry_count = 3 proxy: synchronous = no proxy: default_fallback = yes proxy: dead_time = 120 proxy: post_proxy_authorize = no proxy: wake_all_if_all_dead = no security: max_attributes = 200 security: reject_delay = 1 security: status_server = no main: debug_level = 0 read_config_files: reading dictionary read_config_files: reading naslist Using deprecated naslist file. Support for this will go away soon. read_config_files: reading clients read_config_files: reading realms radiusd: entering modules setup Module: Library search path is /usr/lib Module: Loaded exec exec: wait = yes exec: program = "(null)" exec: input_pairs = "request" exec: output_pairs = "(null)" exec: packet_type = "(null)" rlm_exec: Wait=yes but no output defined. Did you mean output=none? Module: Instantiated exec (exec) Module: Loaded expr Module: Instantiated expr (expr) Module: Loaded PAP pap: encryption_scheme = "crypt" pap: auto_header = yes Module: Instantiated pap (pap) Module: Loaded CHAP Module: Instantiated chap (chap) Module: Loaded MS-CHAP mschap: use_mppe = yes mschap: require_encryption = no mschap: require_strong = no mschap: with_ntdomain_hack = no mschap: passwd = "(null)" mschap: ntlm_auth = "(null)" Module: Instantiated mschap (mschap) Module: Loaded System unix: cache = no unix: passwd = "(null)" unix: shadow = "(null)" unix: group = "(null)" unix: radwtmp = "/var/log/radius/radwtmp" unix: usegroup = no unix: cache_reload = 600 Module: Instantiated unix (unix) Module: Loaded eap eap: default_eap_type = "md5" eap: timer_expire = 60 eap: ignore_unknown_eap_types = no eap: cisco_accounting_username_bug = no rlm_eap: Loaded and initialized type md5 rlm_eap: Loaded and initialized type leap gtc: challenge = "Password: " gtc: auth_type = "PAP" rlm_eap: Loaded and initialized type gtc tls: rsa_key_exchange = no tls: dh_key_exchange = yes tls: rsa_key_length = 512 tls: dh_key_length = 512 tls: verify_depth = 0 tls: CA_path = "(null)" tls: pem_file_type = yes tls: private_key_file = "/etc/raddb/certs/cert-srv.pem" tls: certificate_file = "/etc/raddb/certs/cert-srv.pem" tls: CA_file = "/etc/raddb/certs/demoCA/cacert.pem" tls: private_key_password = "whatever" tls: dh_file = "/etc/raddb/certs/dh" tls: random_file = "/etc/raddb/certs/random" tls: fragment_size = 1024 tls: include_length = yes tls: check_crl = no tls: check_cert_cn = "(null)" tls: cipher_list = "(null)" tls: check_cert_issuer = "(null)" rlm_eap_tls: Loading the certificate file as a chain WARNING: rlm_eap_tls: Unable to set DH parameters. DH cipher suites may not work! WARNING: Fix this by running the OpenSSL command listed in eap.conf rlm_eap: Loaded and initialized type tls mschapv2: with_ntdomain_hack = no rlm_eap: Loaded and initialized type mschapv2 Module: Instantiated eap (eap) Module: Loaded preprocess preprocess: huntgroups = "/etc/raddb/huntgroups" preprocess: hints = "/etc/raddb/hints" preprocess: with_ascend_hack = no preprocess: ascend_channels_per_line = 23 preprocess: with_ntdomain_hack = no preprocess: with_specialix_jetstream_hack = no preprocess: with_cisco_vsa_hack = no preprocess: with_alvarion_vsa_hack = no Module: Instantiated preprocess (preprocess) Module: Loaded realm realm: format = "suffix" realm: delimiter = "@" realm: ignore_default = no realm: ignore_null = no Module: Instantiated realm (suffix) Module: Loaded files files: usersfile = "/etc/raddb/users" files: acctusersfile = "/etc/raddb/acct_users" files: preproxy_usersfile = "/etc/raddb/preproxy_users" files: compat = "no" Module: Instantiated files (files) Module: Loaded Acct-Unique-Session-Id acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" Module: Instantiated acct_unique (acct_unique) Module: Loaded detail detail: detailfile = "/var/log/radius/radacct/%{Client-IP-Address}/ detail-%Y%m%d" detail: detailperm = 384 detail: dirperm = 493 detail: locking = no Module: Instantiated detail (detail) Module: Loaded radutmp radutmp: filename = "/var/log/radius/radutmp" radutmp: username = "%{User-Name}" radutmp: case_sensitive = yes radutmp: check_with_nas = yes radutmp: perm = 384 radutmp: callerid = yes Module: Instantiated radutmp (radutmp) Listening on authentication *:1812 Listening on accounting *:1813 Listening on proxy 127.0.0.1:1814