help with configs for eap-md5

24 Aug 2015

      Hi,

I'm trying to authenticate a wifi client (wpa_supplicant) using eap-peap
with phase2 autheap=md5. In debug output, eap-peap appears to finalize with
mschapv2 but eap-ttls uses eap-md5. Can I force eap-peap to use eap-md5?

radiusd output eap-peap/autheap=md5

[1mradiusd: FreeRADIUS Version 3.0.3, for host x86_64-redhat-linux-gnu,
built on Jun  3 2014 at 12:39:33[0m
[1mCopyright (C) 1999-2014 The FreeRADIUS server project and
contributors[0m
[1mThere is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A[0m
[1mPARTICULAR PURPOSE[0m
[1mYou may redistribute copies of FreeRADIUS under the terms of the[0m
[1mGNU General Public License[0m
[1mFor more information about these matters, see the file named
COPYRIGHT[0m
[1mStarting - reading configuration files ...[0m
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/raddb/dictionary
including configuration file /etc/raddb/radiusd.conf
including configuration file /etc/raddb/proxy.conf
including configuration file /etc/raddb/clients.conf
including files in directory /etc/raddb/mods-enabled/
including configuration file /etc/raddb/mods-enabled/soh
including configuration file /etc/raddb/mods-enabled/linelog
including configuration file /etc/raddb/mods-enabled/pap
including configuration file /etc/raddb/mods-enabled/utf8
including configuration file /etc/raddb/mods-enabled/ntlm_auth
including configuration file /etc/raddb/mods-enabled/eap
including configuration file /etc/raddb/mods-enabled/mschap
including configuration file /etc/raddb/mods-enabled/unix
including configuration file /etc/raddb/mods-enabled/cache_eap
including configuration file /etc/raddb/mods-enabled/files
including configuration file /etc/raddb/mods-enabled/expiration
including configuration file /etc/raddb/mods-enabled/chap
including configuration file /etc/raddb/mods-enabled/passwd
including configuration file /etc/raddb/mods-enabled/expr
including configuration file /etc/raddb/mods-enabled/digest
including configuration file /etc/raddb/mods-enabled/preprocess
including configuration file /etc/raddb/mods-enabled/echo
including configuration file /etc/raddb/mods-enabled/dhcp
including configuration file /etc/raddb/mods-enabled/detail
including configuration file /etc/raddb/mods-enabled/unpack
including configuration file /etc/raddb/mods-enabled/logintime
including configuration file /etc/raddb/mods-enabled/dynamic_clients
including configuration file /etc/raddb/mods-enabled/attr_filter
including configuration file /etc/raddb/mods-enabled/realm
including configuration file /etc/raddb/mods-enabled/always
including configuration file /etc/raddb/mods-enabled/exec
including configuration file /etc/raddb/mods-enabled/replicate
including configuration file /etc/raddb/mods-enabled/radutmp
including configuration file /etc/raddb/mods-enabled/sradutmp
including configuration file /etc/raddb/mods-enabled/detail.log
including files in directory /etc/raddb/policy.d/
including configuration file /etc/raddb/policy.d/operator-name
including configuration file /etc/raddb/policy.d/eap
including configuration file /etc/raddb/policy.d/control
including configuration file /etc/raddb/policy.d/filter
including configuration file /etc/raddb/policy.d/canonicalization
including configuration file /etc/raddb/policy.d/dhcp
including configuration file /etc/raddb/policy.d/accounting
including configuration file /etc/raddb/policy.d/cui
including files in directory /etc/raddb/sites-enabled/
including configuration file /etc/raddb/sites-enabled/default
including configuration file /etc/raddb/sites-enabled/inner-tunnel
main {
 security {
  user = "radiusd"
  group = "radiusd"
  allow_core_dumps = no
 }
}
main {
name = "radiusd"
prefix = "/usr"
localstatedir = "/var"
sbindir = "/usr/sbin"
logdir = "/var/log/radius"
run_dir = "/var/run/radiusd"
libdir = "/usr/lib64/freeradius"
radacctdir = "/var/log/radius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 1024
pidfile = "/var/run/radiusd/radiusd.pid"
checkrad = "/usr/sbin/checkrad"
debug_level = 0
proxy_requests = yes
 log {
  stripped_names = no
  auth = no
  auth_badpass = no
  auth_goodpass = no
  colourise = yes
  msg_denied = "You are already logged in - access denied"
 }
 security {
  max_attributes = 200
  reject_delay = 1
  status_server = yes
  allow_vulnerable_openssl = "CVE-2014-0160"
 }
}
radiusd: #### Loading Realms and Home Servers ####
 proxy server {
  retry_delay = 5
  retry_count = 3
  default_fallback = no
  dead_time = 120
  wake_all_if_all_dead = no
 }
 home_server localhost {
  ipaddr = 127.0.0.1
  port = 1812
  type = "auth"
  secret = <<< secret >>>
  response_window = 20
  max_outstanding = 65536
  zombie_period = 40
  status_check = "status-server"
  ping_interval = 30
  check_interval = 30
  num_answers_to_alive = 3
  revive_interval = 120
  status_check_timeout = 4
  coa {
  irt = 2
  mrt = 16
  mrc = 5
  mrd = 30
  }
  limit {
  max_connections = 16
  max_requests = 0
  lifetime = 0
  idle_timeout = 0
  }
 }
 home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
 }
 realm example.com {
auth_pool = my_auth_failover
 }
 realm LOCAL {
 }
radiusd: #### Loading Clients ####
 client localhost {
  ipaddr = 127.0.0.1
  require_message_authenticator = no
  secret = <<< secret >>>
  nas_type = "other"
  proto = "*"
  limit {
  max_connections = 16
  lifetime = 0
  idle_timeout = 30
  }
 }
radiusd: #### Instantiating modules ####
 instantiate {
 }
 modules {
  # Loaded module rlm_soh
  # Instantiating module "soh" from file /etc/raddb/mods-enabled/soh
  soh {
  dhcp = yes
  }
  # Loaded module rlm_linelog
  # Instantiating module "linelog" from file /etc/raddb/mods-enabled/linelog
  linelog {
  filename = "/var/log/radius/linelog"
  permissions = 384
  format = "This is a log message for %{User-Name}"
  reference = "messages.%{%{Packet-Type}:-default}"
  }
  # Instantiating module "log_accounting" from file
/etc/raddb/mods-enabled/linelog
  linelog log_accounting {
  filename = "/var/log/radius/linelog-accounting"
  permissions = 384
  format = ""
  reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
  }
  # Loaded module rlm_pap
  # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap
  pap {
  normalise = yes
  }
  # Loaded module rlm_utf8
  # Instantiating module "utf8" from file /etc/raddb/mods-enabled/utf8
  # Loaded module rlm_exec
  # Instantiating module "ntlm_auth" from file
/etc/raddb/mods-enabled/ntlm_auth
  exec ntlm_auth {
  wait = yes
  program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN
--username=%{mschap:User-Name} --password=%{User-Password}"
  shell_escape = yes
  }
  # Loaded module rlm_eap
  # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap
  eap {
  default_eap_type = "md5"
  timer_expire = 60
  ignore_unknown_eap_types = no
  mod_accounting_username_bug = no
  max_sessions = 1024
  }
   # Linked to sub-module rlm_eap_md5
   # Linked to sub-module rlm_eap_leap
   # Linked to sub-module rlm_eap_gtc
   gtc {
    challenge = "Password: "
    auth_type = "PAP"
   }
   # Linked to sub-module rlm_eap_tls
   tls {
    tls = "tls-common"
   }
   tls-config tls-common {
    rsa_key_exchange = no
    dh_key_exchange = yes
    rsa_key_length = 512
    dh_key_length = 512
    verify_depth = 0
    ca_path = "/etc/raddb/certs"
    pem_file_type = yes
    private_key_file = "/etc/raddb/certs/server.pem"
    certificate_file = "/etc/raddb/certs/server.pem"
    ca_file = "/etc/raddb/certs/ca.pem"
    private_key_password = <<< secret >>>
    dh_file = "/etc/raddb/certs/dh"
    fragment_size = 1024
    include_length = yes
    check_crl = no
    cipher_list = "DEFAULT"
    ecdh_curve = "prime256v1"
    cache {
    enable = yes
    lifetime = 24
    max_entries = 255
    }
    verify {
    }
    ocsp {
    enable = no
    override_cert_url = yes
    url = "http://127.0.0.1/ocsp/"
    use_nonce = yes
    timeout = 0
    softfail = yes
    }
   }
   # Linked to sub-module rlm_eap_ttls
   ttls {
    tls = "tls-common"
    default_eap_type = "md5"
    copy_request_to_tunnel = no
    use_tunneled_reply = no
    virtual_server = "inner-tunnel"
    include_length = yes
    require_client_cert = no
   }
Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_peap
   peap {
    tls = "tls-common"
    default_method = "mschapv2"
    copy_request_to_tunnel = no
    use_tunneled_reply = no
    proxy_tunneled_request_as_eap = yes
    virtual_server = "inner-tunnel"
    soh = no
    require_client_cert = no
   }
Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_mschapv2
   mschapv2 {
    with_ntdomain_hack = no
    send_error = no
   }
  # Loaded module rlm_mschap
  # Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap
  mschap {
  use_mppe = yes
  require_encryption = no
  require_strong = no
  with_ntdomain_hack = yes
   passchange {
   }
  allow_retry = yes
  }
  # Loaded module rlm_unix
  # Instantiating module "unix" from file /etc/raddb/mods-enabled/unix
  unix {
  radwtmp = "/var/log/radius/radwtmp"
  }
  # Loaded module rlm_cache
  # Instantiating module "cache_eap" from file
/etc/raddb/mods-enabled/cache_eap
  cache cache_eap {
  key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
  ttl = 15
  max_entries = 16384
  epoch = 0
  add_stats = no
  }
  # Loaded module rlm_files
  # Instantiating module "files" from file /etc/raddb/mods-enabled/files
  files {
  filename = "/etc/raddb/mods-config/files/authorize"
  usersfile = "/etc/raddb/mods-config/files/authorize"
  acctusersfile = "/etc/raddb/mods-config/files/accounting"
  preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy"
  compat = "cistron"
  }
reading pairlist file /etc/raddb/mods-config/files/authorize
[/etc/raddb/mods-config/files/authorize]:2 Cistron compatibility checks for
entry lanforge ...
[/etc/raddb/mods-config/files/authorize]:6 Cistron compatibility checks for
entry testuser ...
[/etc/raddb/mods-config/files/authorize]:188 Cistron compatibility checks
for entry DEFAULT ...
[/etc/raddb/mods-config/files/authorize]:195 Cistron compatibility checks
for entry DEFAULT ...
[/etc/raddb/mods-config/files/authorize]:202 Cistron compatibility checks
for entry DEFAULT ...
reading pairlist file /etc/raddb/mods-config/files/authorize
[/etc/raddb/mods-config/files/authorize]:2 Cistron compatibility checks for
entry lanforge ...
[/etc/raddb/mods-config/files/authorize]:6 Cistron compatibility checks for
entry testuser ...
[/etc/raddb/mods-config/files/authorize]:188 Cistron compatibility checks
for entry DEFAULT ...
[/etc/raddb/mods-config/files/authorize]:195 Cistron compatibility checks
for entry DEFAULT ...
[/etc/raddb/mods-config/files/authorize]:202 Cistron compatibility checks
for entry DEFAULT ...
reading pairlist file /etc/raddb/mods-config/files/accounting
reading pairlist file /etc/raddb/mods-config/files/pre-proxy
  # Loaded module rlm_expiration
  # Instantiating module "expiration" from file
/etc/raddb/mods-enabled/expiration
  # Loaded module rlm_chap
  # Instantiating module "chap" from file /etc/raddb/mods-enabled/chap
  # Loaded module rlm_passwd
  # Instantiating module "etc_passwd" from file
/etc/raddb/mods-enabled/passwd
  passwd etc_passwd {
  filename = "/etc/passwd"
  format = "*User-Name:Crypt-Password:"
  delimiter = ":"
  ignore_nislike = no
  ignore_empty = yes
  allow_multiple_keys = no
  hash_size = 100
  }
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
  # Loaded module rlm_expr
  # Instantiating module "expr" from file /etc/raddb/mods-enabled/expr
  expr {
  safe_characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
  }
  # Loaded module rlm_digest
  # Instantiating module "digest" from file /etc/raddb/mods-enabled/digest
  # Loaded module rlm_preprocess
  # Instantiating module "preprocess" from file
/etc/raddb/mods-enabled/preprocess
  preprocess {
  huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups"
  hints = "/etc/raddb/mods-config/preprocess/hints"
  with_ascend_hack = no
  ascend_channels_per_line = 23
  with_ntdomain_hack = no
  with_specialix_jetstream_hack = no
  with_cisco_vsa_hack = no
  with_alvarion_vsa_hack = no
  }
reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups
reading pairlist file /etc/raddb/mods-config/preprocess/hints
  # Instantiating module "echo" from file /etc/raddb/mods-enabled/echo
  exec echo {
  wait = yes
  program = "/bin/echo %{User-Name}"
  input_pairs = "request"
  output_pairs = "reply"
  shell_escape = yes
  }
  # Loaded module rlm_dhcp
  # Instantiating module "dhcp" from file /etc/raddb/mods-enabled/dhcp
  # Loaded module rlm_detail
  # Instantiating module "detail" from file /etc/raddb/mods-enabled/detail
  detail {
  filename =
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  log_packet_header = no
  }
  # Loaded module rlm_unpack
  # Instantiating module "unpack" from file /etc/raddb/mods-enabled/unpack
  # Loaded module rlm_logintime
  # Instantiating module "logintime" from file
/etc/raddb/mods-enabled/logintime
  logintime {
  minimum_timeout = 60
  }
  # Loaded module rlm_dynamic_clients
  # Instantiating module "dynamic_clients" from file
/etc/raddb/mods-enabled/dynamic_clients
  # Loaded module rlm_attr_filter
  # Instantiating module "attr_filter.post-proxy" from file
/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.post-proxy {
  filename = "/etc/raddb/mods-config/attr_filter/post-proxy"
  key = "%{Realm}"
  relaxed = no
  }
reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy
  # Instantiating module "attr_filter.pre-proxy" from file
/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.pre-proxy {
  filename = "/etc/raddb/mods-config/attr_filter/pre-proxy"
  key = "%{Realm}"
  relaxed = no
  }
reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy
  # Instantiating module "attr_filter.access_reject" from file
/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.access_reject {
  filename = "/etc/raddb/mods-config/attr_filter/access_reject"
  key = "%{User-Name}"
  relaxed = no
  }
reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject
  # Instantiating module "attr_filter.access_challenge" from file
/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.access_challenge {
  filename = "/etc/raddb/mods-config/attr_filter/access_challenge"
  key = "%{User-Name}"
  relaxed = no
  }
reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge
  # Instantiating module "attr_filter.accounting_response" from file
/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.accounting_response {
  filename = "/etc/raddb/mods-config/attr_filter/accounting_response"
  key = "%{User-Name}"
  relaxed = no
  }
reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response
  # Loaded module rlm_realm
  # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm
  realm IPASS {
  format = "prefix"
  delimiter = "/"
  ignore_default = no
  ignore_null = no
  }
  # Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm
  realm suffix {
  format = "suffix"
  delimiter = "@"
  ignore_default = no
  ignore_null = no
  }
  # Instantiating module "realmpercent" from file
/etc/raddb/mods-enabled/realm
  realm realmpercent {
  format = "suffix"
  delimiter = "%"
  ignore_default = no
  ignore_null = no
  }
  # Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm
  realm ntdomain {
  format = "prefix"
  delimiter = "\"
  ignore_default = no
  ignore_null = no
  }
  # Loaded module rlm_always
  # Instantiating module "reject" from file /etc/raddb/mods-enabled/always
  always reject {
  rcode = "reject"
  simulcount = 0
  mpp = no
  }
  # Instantiating module "fail" from file /etc/raddb/mods-enabled/always
  always fail {
  rcode = "fail"
  simulcount = 0
  mpp = no
  }
  # Instantiating module "ok" from file /etc/raddb/mods-enabled/always
  always ok {
  rcode = "ok"
  simulcount = 0
  mpp = no
  }
  # Instantiating module "handled" from file /etc/raddb/mods-enabled/always
  always handled {
  rcode = "handled"
  simulcount = 0
  mpp = no
  }
  # Instantiating module "invalid" from file /etc/raddb/mods-enabled/always
  always invalid {
  rcode = "invalid"
  simulcount = 0
  mpp = no
  }
  # Instantiating module "userlock" from file /etc/raddb/mods-enabled/always
  always userlock {
  rcode = "userlock"
  simulcount = 0
  mpp = no
  }
  # Instantiating module "notfound" from file /etc/raddb/mods-enabled/always
  always notfound {
  rcode = "notfound"
  simulcount = 0
  mpp = no
  }
  # Instantiating module "noop" from file /etc/raddb/mods-enabled/always
  always noop {
  rcode = "noop"
  simulcount = 0
  mpp = no
  }
  # Instantiating module "updated" from file /etc/raddb/mods-enabled/always
  always updated {
  rcode = "updated"
  simulcount = 0
  mpp = no
  }
  # Instantiating module "exec" from file /etc/raddb/mods-enabled/exec
  exec {
  wait = no
  input_pairs = "request"
  shell_escape = yes
  timeout = 10
  }
  # Loaded module rlm_replicate
  # Instantiating module "replicate" from file
/etc/raddb/mods-enabled/replicate
  # Loaded module rlm_radutmp
  # Instantiating module "radutmp" from file /etc/raddb/mods-enabled/radutmp
  radutmp {
  filename = "/var/log/radius/radutmp"
  username = "%{User-Name}"
  case_sensitive = yes
  check_with_nas = yes
  permissions = 384
  caller_id = yes
  }
  # Instantiating module "sradutmp" from file
/etc/raddb/mods-enabled/sradutmp
  radutmp sradutmp {
  filename = "/var/log/radius/sradutmp"
  username = "%{User-Name}"
  case_sensitive = yes
  check_with_nas = yes
  permissions = 420
  caller_id = no
  }
  # Instantiating module "auth_log" from file
/etc/raddb/mods-enabled/detail.log
  detail auth_log {
  filename =
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  log_packet_header = no
  }
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
detail output
  # Instantiating module "reply_log" from file
/etc/raddb/mods-enabled/detail.log
  detail reply_log {
  filename =
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  log_packet_header = no
  }
  # Instantiating module "pre_proxy_log" from file
/etc/raddb/mods-enabled/detail.log
  detail pre_proxy_log {
  filename =
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  log_packet_header = no
  }
  # Instantiating module "post_proxy_log" from file
/etc/raddb/mods-enabled/detail.log
  detail post_proxy_log {
  filename =
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  log_packet_header = no
  }
 } # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/raddb/radiusd.conf
} # server
server default { # from file /etc/raddb/sites-enabled/default
 # Creating Auth-Type = digest
 # Loading authenticate {...}
 # Loading authorize {...}
Ignoring "sql" (see raddb/mods-available/README.rst)
Ignoring "ldap" (see raddb/mods-available/README.rst)
 # Loading preacct {...}
 # Loading accounting {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
} # server default
server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel
 # Loading authenticate {...}
 # Loading authorize {...}
 # Loading session {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
} # server inner-tunnel
radiusd: #### Opening IP addresses and Ports ####
listen {
  type = "auth"
  ipaddr = *
  port = 0
   limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
   }
}
listen {
  type = "acct"
  ipaddr = *
  port = 0
   limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
   }
}
listen {
  type = "auth"
  ipaddr = 127.0.0.1
  port = 18120
}
Listening on auth address * port 1812 as server default
Listening on acct address * port 1813 as server default
Listening on auth address 127.0.0.1 port 18120 as server inner-tunnel
Opening new proxy socket 'proxy address * port 0'
Listening on proxy address * port 60874
Ready to process requests.
Received Access-Request Id 58 from 127.0.0.1:35433 to 127.0.0.1:1812 length
199
User-Name = 'testuser'
NAS-IP-Address = 127.0.0.1
Called-Station-Id = '04-F0-21-17-94-44:ac-vap-ch149'
NAS-Port-Type = Wireless-802.11
NAS-Port = 1
Calling-Station-Id = '04-F0-21-E7-56-41'
Connect-Info = 'CONNECT 54Mbps 802.11a'
Acct-Session-Id = '55DB92D7-00000006'
X-Ascend-Home-Agent-UDP-Port = 1027076
X-Ascend-Multilink-ID = 1027074
X-Ascend-Num-In-Multilink = 1027073
Framed-MTU = 1400
EAP-Message = 0x02fc000d017465737475736572
Message-Authenticator = 0x67f928dcf08d49cee2254f7772c38dce
(0) # Executing section authorize from file /etc/raddb/sites-enabled/default
(0)   authorize {
(0)   filter_username filter_username {
(0)     if (User-Name != "%{tolower:%{User-Name}}")
(0) EXPAND %{tolower:%{User-Name}}
(0)    --> testuser
(0)     if (User-Name != "%{tolower:%{User-Name}}")  -> FALSE
(0)     if (User-Name =~ / /)
(0)     if (User-Name =~ / /)  -> FALSE
(0)     if (User-Name =~ /@.*@/ )
(0)     if (User-Name =~ /@.*@/ )  -> FALSE
(0)     if (User-Name =~ /\\.\\./ )
(0)     if (User-Name =~ /\\.\\./ )  -> FALSE
(0)     if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))
(0)     if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))   -> FALSE
(0)     if (User-Name =~ /\\.$/)
(0)     if (User-Name =~ /\\.$/)   -> FALSE
(0)     if (User-Name =~ /@\\./)
(0)     if (User-Name =~ /@\\./)   -> FALSE
(0)   } # filter_username filter_username = notfound
(0)   [chap] = noop
(0)   [mschap] = noop
(0)   [digest] = noop
(0) suffix : No '@' in User-Name = "testuser", looking up realm NULL
(0) suffix : No such realm "NULL"
(0)   [suffix] = noop
(0) eap : EAP packet type response id 252 length 13
(0) eap : EAP-Identity reply, returning 'ok' so we can short-circuit the
rest of authorize
(0)   [eap] = ok
(0)  } #  authorize = ok
(0) Found Auth-Type = EAP
(0) # Executing group from file /etc/raddb/sites-enabled/default
(0)   authenticate {
(0) eap : Peer sent Identity (1)
(0) eap : Calling eap_md5 to process EAP data
(0) eap_md5 : Issuing MD5 Challenge
(0) eap : New EAP session, adding 'State' attribute to reply
0xac337ffeacce7bb4
(0)   [eap] = handled
(0)  } #  authenticate = handled
Sending Access-Challenge Id 58 from 127.0.0.1:1812 to 127.0.0.1:35433
EAP-Message = 0x01fd00160410b5170ee0cf757095a1c0ece75b55c2b2
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xac337ffeacce7bb44296c44be3bc030a
(0) Finished request
Waking up in 0.3 seconds.
Received Access-Request Id 59 from 127.0.0.1:35433 to 127.0.0.1:1812 length
210
User-Name = 'testuser'
NAS-IP-Address = 127.0.0.1
Called-Station-Id = '04-F0-21-17-94-44:ac-vap-ch149'
NAS-Port-Type = Wireless-802.11
NAS-Port = 1
Calling-Station-Id = '04-F0-21-E7-56-41'
Connect-Info = 'CONNECT 54Mbps 802.11a'
Acct-Session-Id = '55DB92D7-00000006'
X-Ascend-Home-Agent-UDP-Port = 1027076
X-Ascend-Multilink-ID = 1027074
X-Ascend-Num-In-Multilink = 1027073
Framed-MTU = 1400
EAP-Message = 0x02fd00060319
State = 0xac337ffeacce7bb44296c44be3bc030a
Message-Authenticator = 0x1994ae87ae4554d634fc95d88c8f6aed
(1) # Executing section authorize from file /etc/raddb/sites-enabled/default
(1)   authorize {
(1)   filter_username filter_username {
(1)     if (User-Name != "%{tolower:%{User-Name}}")
(1) EXPAND %{tolower:%{User-Name}}
(1)    --> testuser
(1)     if (User-Name != "%{tolower:%{User-Name}}")  -> FALSE
(1)     if (User-Name =~ / /)
(1)     if (User-Name =~ / /)  -> FALSE
(1)     if (User-Name =~ /@.*@/ )
(1)     if (User-Name =~ /@.*@/ )  -> FALSE
(1)     if (User-Name =~ /\\.\\./ )
(1)     if (User-Name =~ /\\.\\./ )  -> FALSE
(1)     if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))
(1)     if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))   -> FALSE
(1)     if (User-Name =~ /\\.$/)
(1)     if (User-Name =~ /\\.$/)   -> FALSE
(1)     if (User-Name =~ /@\\./)
(1)     if (User-Name =~ /@\\./)   -> FALSE
(1)   } # filter_username filter_username = notfound
(1)   [chap] = noop
(1)   [mschap] = noop
(1)   [digest] = noop
(1) suffix : No '@' in User-Name = "testuser", looking up realm NULL
(1) suffix : No such realm "NULL"
(1)   [suffix] = noop
(1) eap : EAP packet type response id 253 length 6
(1) eap : No EAP Start, assuming it's an on-going EAP conversation
(1)   [eap] = updated
(1) files : users: Matched entry testuser at line 6
(1)   [files] = ok
(1)   [expiration] = noop
(1)   [logintime] = noop
(1) WARNING: pap : Auth-Type already set.  Not setting to PAP
(1)   [pap] = noop
(1)  } #  authorize = updated
(1) Found Auth-Type = EAP
(1) # Executing group from file /etc/raddb/sites-enabled/default
(1)   authenticate {
(1) eap : Expiring EAP session with state 0xac337ffeacce7bb4
(1) eap : Finished EAP session with state 0xac337ffeacce7bb4
(1) eap : Previous EAP request found for state 0xac337ffeacce7bb4, released
from the list
(1) eap : Peer sent NAK (3)
(1) eap : Found mutually acceptable type PEAP (25)
(1) eap : Calling eap_peap to process EAP data
(1) eap_peap : Flushing SSL sessions (of #0)
(1) eap_peap : Initiate
(1) eap_peap : Start returned 1
(1) eap : New EAP session, adding 'State' attribute to reply
0xac337ffeadcd66b4
(1)   [eap] = handled
(1)  } #  authenticate = handled
Sending Access-Challenge Id 59 from 127.0.0.1:1812 to 127.0.0.1:35433
EAP-Message = 0x01fe00061920
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xac337ffeadcd66b44296c44be3bc030a
(1) Finished request
Waking up in 0.3 seconds.
Received Access-Request Id 60 from 127.0.0.1:35433 to 127.0.0.1:1812 length
461
User-Name = 'testuser'
NAS-IP-Address = 127.0.0.1
Called-Station-Id = '04-F0-21-17-94-44:ac-vap-ch149'
NAS-Port-Type = Wireless-802.11
NAS-Port = 1
Calling-Station-Id = '04-F0-21-E7-56-41'
Connect-Info = 'CONNECT 54Mbps 802.11a'
Acct-Session-Id = '55DB92D7-00000006'
X-Ascend-Home-Agent-UDP-Port = 1027076
X-Ascend-Multilink-ID = 1027074
X-Ascend-Num-In-Multilink = 1027073
Framed-MTU = 1400
EAP-Message =
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
State = 0xac337ffeadcd66b44296c44be3bc030a
Message-Authenticator = 0x20d3d3f1dc408bde9e511f4850a7f480
(2) # Executing section authorize from file /etc/raddb/sites-enabled/default
(2)   authorize {
(2)   filter_username filter_username {
(2)     if (User-Name != "%{tolower:%{User-Name}}")
(2) EXPAND %{tolower:%{User-Name}}
(2)    --> testuser
(2)     if (User-Name != "%{tolower:%{User-Name}}")  -> FALSE
(2)     if (User-Name =~ / /)
(2)     if (User-Name =~ / /)  -> FALSE
(2)     if (User-Name =~ /@.*@/ )
(2)     if (User-Name =~ /@.*@/ )  -> FALSE
(2)     if (User-Name =~ /\\.\\./ )
(2)     if (User-Name =~ /\\.\\./ )  -> FALSE
(2)     if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))
(2)     if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))   -> FALSE
(2)     if (User-Name =~ /\\.$/)
(2)     if (User-Name =~ /\\.$/)   -> FALSE
(2)     if (User-Name =~ /@\\./)
(2)     if (User-Name =~ /@\\./)   -> FALSE
(2)   } # filter_username filter_username = notfound
(2)   [chap] = noop
(2)   [mschap] = noop
(2)   [digest] = noop
(2) suffix : No '@' in User-Name = "testuser", looking up realm NULL
(2) suffix : No such realm "NULL"
(2)   [suffix] = noop
(2) eap : EAP packet type response id 254 length 255
(2) eap : Continuing tunnel setup.
(2)   [eap] = ok
(2)  } #  authorize = ok
(2) Found Auth-Type = EAP
(2) # Executing group from file /etc/raddb/sites-enabled/default
(2)   authenticate {
(2) eap : Expiring EAP session with state 0xac337ffeadcd66b4
(2) eap : Finished EAP session with state 0xac337ffeadcd66b4
(2) eap : Previous EAP request found for state 0xac337ffeadcd66b4, released
from the list
(2) eap : Peer sent PEAP (25)
(2) eap : EAP PEAP (25)
(2) eap : Calling eap_peap to process EAP data
(2) eap_peap : processing EAP-TLS
  TLS Length 245
(2) eap_peap : Length Included
(2) eap_peap : eaptls_verify returned 11
(2) eap_peap :     (other): before/accept initialization
(2) eap_peap :     TLS_accept: before/accept initialization
(2) eap_peap : <<< TLS 1.0 Handshake [length 00f0], ClientHello
(2) eap_peap :     TLS_accept: SSLv3 read client hello A
(2) eap_peap : >>> TLS 1.0 Handshake [length 005e], ServerHello
(2) eap_peap :     TLS_accept: SSLv3 write server hello A
(2) eap_peap : >>> TLS 1.0 Handshake [length 0919], Certificate
(2) eap_peap :     TLS_accept: SSLv3 write certificate A
(2) eap_peap : >>> TLS 1.0 Handshake [length 014b], ServerKeyExchange
(2) eap_peap :     TLS_accept: SSLv3 write key exchange A
(2) eap_peap : >>> TLS 1.0 Handshake [length 0004], ServerHelloDone
(2) eap_peap :     TLS_accept: SSLv3 write server done A
(2) eap_peap :     TLS_accept: SSLv3 flush data
(2) eap_peap :     TLS_accept: Need to read more data: SSLv3 read client
certificate A
In SSL Handshake Phase
In SSL Accept mode
(2) eap_peap : eaptls_process returned 13
(2) eap_peap : FR_TLS_HANDLED
(2) eap : New EAP session, adding 'State' attribute to reply
0xac337ffeaecc66b4
(2)   [eap] = handled
(2)  } #  authenticate = handled
Sending Access-Challenge Id 60 from 127.0.0.1:1812 to 127.0.0.1:35433
EAP-Message =
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
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xac337ffeaecc66b44296c44be3bc030a
(2) Finished request
Waking up in 0.3 seconds.
Received Access-Request Id 61 from 127.0.0.1:35433 to 127.0.0.1:1812 length
210
User-Name = 'testuser'
NAS-IP-Address = 127.0.0.1
Called-Station-Id = '04-F0-21-17-94-44:ac-vap-ch149'
NAS-Port-Type = Wireless-802.11
NAS-Port = 1
Calling-Station-Id = '04-F0-21-E7-56-41'
Connect-Info = 'CONNECT 54Mbps 802.11a'
Acct-Session-Id = '55DB92D7-00000006'
X-Ascend-Home-Agent-UDP-Port = 1027076
X-Ascend-Multilink-ID = 1027074
X-Ascend-Num-In-Multilink = 1027073
Framed-MTU = 1400
EAP-Message = 0x02ff00061900
State = 0xac337ffeaecc66b44296c44be3bc030a
Message-Authenticator = 0xf134ca7d6d47ce150fa86ceda495b9b6
(3) # Executing section authorize from file /etc/raddb/sites-enabled/default
(3)   authorize {
(3)   filter_username filter_username {
(3)     if (User-Name != "%{tolower:%{User-Name}}")
(3) EXPAND %{tolower:%{User-Name}}
(3)    --> testuser
(3)     if (User-Name != "%{tolower:%{User-Name}}")  -> FALSE
(3)     if (User-Name =~ / /)
(3)     if (User-Name =~ / /)  -> FALSE
(3)     if (User-Name =~ /@.*@/ )
(3)     if (User-Name =~ /@.*@/ )  -> FALSE
(3)     if (User-Name =~ /\\.\\./ )
(3)     if (User-Name =~ /\\.\\./ )  -> FALSE
(3)     if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))
(3)     if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))   -> FALSE
(3)     if (User-Name =~ /\\.$/)
(3)     if (User-Name =~ /\\.$/)   -> FALSE
(3)     if (User-Name =~ /@\\./)
(3)     if (User-Name =~ /@\\./)   -> FALSE
(3)   } # filter_username filter_username = notfound
(3)   [chap] = noop
(3)   [mschap] = noop
(3)   [digest] = noop
(3) suffix : No '@' in User-Name = "testuser", looking up realm NULL
(3) suffix : No such realm "NULL"
(3)   [suffix] = noop
(3) eap : EAP packet type response id 255 length 6
(3) eap : Continuing tunnel setup.
(3)   [eap] = ok
(3)  } #  authorize = ok
(3) Found Auth-Type = EAP
(3) # Executing group from file /etc/raddb/sites-enabled/default
(3)   authenticate {
(3) eap : Expiring EAP session with state 0xac337ffeaecc66b4
(3) eap : Finished EAP session with state 0xac337ffeaecc66b4
(3) eap : Previous EAP request found for state 0xac337ffeaecc66b4, released
from the list
(3) eap : Peer sent PEAP (25)
(3) eap : EAP PEAP (25)
(3) eap : Calling eap_peap to process EAP data
(3) eap_peap : processing EAP-TLS
(3) eap_peap : Received TLS ACK
(3) eap_peap : Received TLS ACK
(3) eap_peap : ACK handshake fragment handler
(3) eap_peap : eaptls_verify returned 1
(3) eap_peap : eaptls_process returned 13
(3) eap_peap : FR_TLS_HANDLED
(3) eap : New EAP session, adding 'State' attribute to reply
0xac337ffeaf3366b4
(3)   [eap] = handled
(3)  } #  authenticate = handled
Sending Access-Challenge Id 61 from 127.0.0.1:1812 to 127.0.0.1:35433
EAP-Message =
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
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xac337ffeaf3366b44296c44be3bc030a
(3) Finished request
Waking up in 0.3 seconds.
Received Access-Request Id 62 from 127.0.0.1:35433 to 127.0.0.1:1812 length
210
User-Name = 'testuser'
NAS-IP-Address = 127.0.0.1
Called-Station-Id = '04-F0-21-17-94-44:ac-vap-ch149'
NAS-Port-Type = Wireless-802.11
NAS-Port = 1
Calling-Station-Id = '04-F0-21-E7-56-41'
Connect-Info = 'CONNECT 54Mbps 802.11a'
Acct-Session-Id = '55DB92D7-00000006'
X-Ascend-Home-Agent-UDP-Port = 1027076
X-Ascend-Multilink-ID = 1027074
X-Ascend-Num-In-Multilink = 1027073
Framed-MTU = 1400
EAP-Message = 0x020000061900
State = 0xac337ffeaf3366b44296c44be3bc030a
Message-Authenticator = 0xcb56c029b6b43ae5dd19540233961ff8
(4) # Executing section authorize from file /etc/raddb/sites-enabled/default
(4)   authorize {
(4)   filter_username filter_username {
(4)     if (User-Name != "%{tolower:%{User-Name}}")
(4) EXPAND %{tolower:%{User-Name}}
(4)    --> testuser
(4)     if (User-Name != "%{tolower:%{User-Name}}")  -> FALSE
(4)     if (User-Name =~ / /)
(4)     if (User-Name =~ / /)  -> FALSE
(4)     if (User-Name =~ /@.*@/ )
(4)     if (User-Name =~ /@.*@/ )  -> FALSE
(4)     if (User-Name =~ /\\.\\./ )
(4)     if (User-Name =~ /\\.\\./ )  -> FALSE
(4)     if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))
(4)     if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))   -> FALSE
(4)     if (User-Name =~ /\\.$/)
(4)     if (User-Name =~ /\\.$/)   -> FALSE
(4)     if (User-Name =~ /@\\./)
(4)     if (User-Name =~ /@\\./)   -> FALSE
(4)   } # filter_username filter_username = notfound
(4)   [chap] = noop
(4)   [mschap] = noop
(4)   [digest] = noop
(4) suffix : No '@' in User-Name = "testuser", looking up realm NULL
(4) suffix : No such realm "NULL"
(4)   [suffix] = noop
(4) eap : EAP packet type response id 0 length 6
(4) eap : Continuing tunnel setup.
(4)   [eap] = ok
(4)  } #  authorize = ok
(4) Found Auth-Type = EAP
(4) # Executing group from file /etc/raddb/sites-enabled/default
(4)   authenticate {
(4) eap : Expiring EAP session with state 0xac337ffeaf3366b4
(4) eap : Finished EAP session with state 0xac337ffeaf3366b4
(4) eap : Previous EAP request found for state 0xac337ffeaf3366b4, released
from the list
(4) eap : Peer sent PEAP (25)
(4) eap : EAP PEAP (25)
(4) eap : Calling eap_peap to process EAP data
(4) eap_peap : processing EAP-TLS
(4) eap_peap : Received TLS ACK
(4) eap_peap : Received TLS ACK
(4) eap_peap : ACK handshake fragment handler
(4) eap_peap : eaptls_verify returned 1
(4) eap_peap : eaptls_process returned 13
(4) eap_peap : FR_TLS_HANDLED
(4) eap : New EAP session, adding 'State' attribute to reply
0xac337ffea83266b4
(4)   [eap] = handled
(4)  } #  authenticate = handled
Sending Access-Challenge Id 62 from 127.0.0.1:1812 to 127.0.0.1:35433
EAP-Message =
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
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xac337ffea83266b44296c44be3bc030a
(4) Finished request
Waking up in 0.3 seconds.
Received Access-Request Id 63 from 127.0.0.1:35433 to 127.0.0.1:1812 length
348
User-Name = 'testuser'
NAS-IP-Address = 127.0.0.1
Called-Station-Id = '04-F0-21-17-94-44:ac-vap-ch149'
NAS-Port-Type = Wireless-802.11
NAS-Port = 1
Calling-Station-Id = '04-F0-21-E7-56-41'
Connect-Info = 'CONNECT 54Mbps 802.11a'
Acct-Session-Id = '55DB92D7-00000006'
X-Ascend-Home-Agent-UDP-Port = 1027076
X-Ascend-Multilink-ID = 1027074
X-Ascend-Num-In-Multilink = 1027073
Framed-MTU = 1400
EAP-Message =
0x02010090198000000086160301004610000042410468aef3802264953b0ffe64b27b0f83f447a87c59c64bf07d2469a6088befd8f6b83cf6bb4402fe835e0271fdcfdb6e8a5e7ae471f7b7e288e6ddb03ce451053e14030100010116030100309cbdf6ca7f30ad8119e875efea52a26e51ca4774da01e75623932dadf8bf567a04bc278a4d4c6e260a864149c3105ac9
State = 0xac337ffea83266b44296c44be3bc030a
Message-Authenticator = 0xb2950f28a83b928efd6969581896e10c
(5) # Executing section authorize from file /etc/raddb/sites-enabled/default
(5)   authorize {
(5)   filter_username filter_username {
(5)     if (User-Name != "%{tolower:%{User-Name}}")
(5) EXPAND %{tolower:%{User-Name}}
(5)    --> testuser
(5)     if (User-Name != "%{tolower:%{User-Name}}")  -> FALSE
(5)     if (User-Name =~ / /)
(5)     if (User-Name =~ / /)  -> FALSE
(5)     if (User-Name =~ /@.*@/ )
(5)     if (User-Name =~ /@.*@/ )  -> FALSE
(5)     if (User-Name =~ /\\.\\./ )
(5)     if (User-Name =~ /\\.\\./ )  -> FALSE
(5)     if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))
(5)     if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))   -> FALSE
(5)     if (User-Name =~ /\\.$/)
(5)     if (User-Name =~ /\\.$/)   -> FALSE
(5)     if (User-Name =~ /@\\./)
(5)     if (User-Name =~ /@\\./)   -> FALSE
(5)   } # filter_username filter_username = notfound
(5)   [chap] = noop
(5)   [mschap] = noop
(5)   [digest] = noop
(5) suffix : No '@' in User-Name = "testuser", looking up realm NULL
(5) suffix : No such realm "NULL"
(5)   [suffix] = noop
(5) eap : EAP packet type response id 1 length 144
(5) eap : Continuing tunnel setup.
(5)   [eap] = ok
(5)  } #  authorize = ok
(5) Found Auth-Type = EAP
(5) # Executing group from file /etc/raddb/sites-enabled/default
(5)   authenticate {
(5) eap : Expiring EAP session with state 0xac337ffea83266b4
(5) eap : Finished EAP session with state 0xac337ffea83266b4
(5) eap : Previous EAP request found for state 0xac337ffea83266b4, released
from the list
(5) eap : Peer sent PEAP (25)
(5) eap : EAP PEAP (25)
(5) eap : Calling eap_peap to process EAP data
(5) eap_peap : processing EAP-TLS
  TLS Length 134
(5) eap_peap : Length Included
(5) eap_peap : eaptls_verify returned 11
(5) eap_peap : <<< TLS 1.0 Handshake [length 0046], ClientKeyExchange
(5) eap_peap :     TLS_accept: SSLv3 read client key exchange A
(5) eap_peap : <<< TLS 1.0 ChangeCipherSpec [length 0001]
(5) eap_peap : <<< TLS 1.0 Handshake [length 0010], Finished
(5) eap_peap :     TLS_accept: SSLv3 read finished A
(5) eap_peap : >>> TLS 1.0 ChangeCipherSpec [length 0001]
(5) eap_peap :     TLS_accept: SSLv3 write change cipher spec A
(5) eap_peap : >>> TLS 1.0 Handshake [length 0010], Finished
(5) eap_peap :     TLS_accept: SSLv3 write finished A
(5) eap_peap :     TLS_accept: SSLv3 flush data
  SSL: adding session
2b5c6979693e22cc640a8726e21abfc4da4779a0d349188a0bb6c87d3233ad0d to cache
(5) eap_peap :     (other): SSL negotiation finished successfully
SSL Connection Established
(5) eap_peap : eaptls_process returned 13
(5) eap_peap : FR_TLS_HANDLED
(5) eap : New EAP session, adding 'State' attribute to reply
0xac337ffea93166b4
(5)   [eap] = handled
(5)  } #  authenticate = handled
Sending Access-Challenge Id 63 from 127.0.0.1:1812 to 127.0.0.1:35433
EAP-Message =
0x01020041190014030100010116030100308eae5a41f6e395126186db8125de0b004e3ae1e8264e9acd8c82ab24482555bf6190fdd8be5dc9ce6cbf8887e886e1eb
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xac337ffea93166b44296c44be3bc030a
(5) Finished request
Waking up in 0.3 seconds.
Received Access-Request Id 64 from 127.0.0.1:35433 to 127.0.0.1:1812 length
210
User-Name = 'testuser'
NAS-IP-Address = 127.0.0.1
Called-Station-Id = '04-F0-21-17-94-44:ac-vap-ch149'
NAS-Port-Type = Wireless-802.11
NAS-Port = 1
Calling-Station-Id = '04-F0-21-E7-56-41'
Connect-Info = 'CONNECT 54Mbps 802.11a'
Acct-Session-Id = '55DB92D7-00000006'
X-Ascend-Home-Agent-UDP-Port = 1027076
X-Ascend-Multilink-ID = 1027074
X-Ascend-Num-In-Multilink = 1027073
Framed-MTU = 1400
EAP-Message = 0x020200061900
State = 0xac337ffea93166b44296c44be3bc030a
Message-Authenticator = 0x101a53003bdd588a9d9e5923504506b5
(6) # Executing section authorize from file /etc/raddb/sites-enabled/default
(6)   authorize {
(6)   filter_username filter_username {
(6)     if (User-Name != "%{tolower:%{User-Name}}")
(6) EXPAND %{tolower:%{User-Name}}
(6)    --> testuser
(6)     if (User-Name != "%{tolower:%{User-Name}}")  -> FALSE
(6)     if (User-Name =~ / /)
(6)     if (User-Name =~ / /)  -> FALSE
(6)     if (User-Name =~ /@.*@/ )
(6)     if (User-Name =~ /@.*@/ )  -> FALSE
(6)     if (User-Name =~ /\\.\\./ )
(6)     if (User-Name =~ /\\.\\./ )  -> FALSE
(6)     if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))
(6)     if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))   -> FALSE
(6)     if (User-Name =~ /\\.$/)
(6)     if (User-Name =~ /\\.$/)   -> FALSE
(6)     if (User-Name =~ /@\\./)
(6)     if (User-Name =~ /@\\./)   -> FALSE
(6)   } # filter_username filter_username = notfound
(6)   [chap] = noop
(6)   [mschap] = noop
(6)   [digest] = noop
(6) suffix : No '@' in User-Name = "testuser", looking up realm NULL
(6) suffix : No such realm "NULL"
(6)   [suffix] = noop
(6) eap : EAP packet type response id 2 length 6
(6) eap : Continuing tunnel setup.
(6)   [eap] = ok
(6)  } #  authorize = ok
(6) Found Auth-Type = EAP
(6) # Executing group from file /etc/raddb/sites-enabled/default
(6)   authenticate {
(6) eap : Expiring EAP session with state 0xac337ffea93166b4
(6) eap : Finished EAP session with state 0xac337ffea93166b4
(6) eap : Previous EAP request found for state 0xac337ffea93166b4, released
from the list
(6) eap : Peer sent PEAP (25)
(6) eap : EAP PEAP (25)
(6) eap : Calling eap_peap to process EAP data
(6) eap_peap : processing EAP-TLS
(6) eap_peap : Received TLS ACK
(6) eap_peap : Received TLS ACK
(6) eap_peap : ACK handshake is finished
(6) eap_peap : eaptls_verify returned 3
(6) eap_peap : eaptls_process returned 3
(6) eap_peap : FR_TLS_SUCCESS
(6) eap_peap : Session established.  Decoding tunneled attributes.
(6) eap_peap : Peap state TUNNEL ESTABLISHED
(6) eap : New EAP session, adding 'State' attribute to reply
0xac337ffeaa3066b4
(6)   [eap] = handled
(6)  } #  authenticate = handled
Sending Access-Challenge Id 64 from 127.0.0.1:1812 to 127.0.0.1:35433
EAP-Message =
0x0103002b19001703010020d8963167cb2c91701ba58e1bd30091199cad2114d0ef5eebffb2506ba9a61c50
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xac337ffeaa3066b44296c44be3bc030a
(6) Finished request
Waking up in 0.3 seconds.
Received Access-Request Id 65 from 127.0.0.1:35433 to 127.0.0.1:1812 length
284
User-Name = 'testuser'
NAS-IP-Address = 127.0.0.1
Called-Station-Id = '04-F0-21-17-94-44:ac-vap-ch149'
NAS-Port-Type = Wireless-802.11
NAS-Port = 1
Calling-Station-Id = '04-F0-21-E7-56-41'
Connect-Info = 'CONNECT 54Mbps 802.11a'
Acct-Session-Id = '55DB92D7-00000006'
X-Ascend-Home-Agent-UDP-Port = 1027076
X-Ascend-Multilink-ID = 1027074
X-Ascend-Num-In-Multilink = 1027073
Framed-MTU = 1400
EAP-Message =
0x020300501900170301002019e34d12ed021daad5109ab27ba81e2dd80c4006a3137fe2cbb4584c08b2e0c91703010020f274e1276548e21e74bccff55e31ec2e69fd2c23d10129e1cfe2e5a12000fe6e
State = 0xac337ffeaa3066b44296c44be3bc030a
Message-Authenticator = 0x4d70591d71e8115e95bc9188bc4e7e44
(7) # Executing section authorize from file /etc/raddb/sites-enabled/default
(7)   authorize {
(7)   filter_username filter_username {
(7)     if (User-Name != "%{tolower:%{User-Name}}")
(7) EXPAND %{tolower:%{User-Name}}
(7)    --> testuser
(7)     if (User-Name != "%{tolower:%{User-Name}}")  -> FALSE
(7)     if (User-Name =~ / /)
(7)     if (User-Name =~ / /)  -> FALSE
(7)     if (User-Name =~ /@.*@/ )
(7)     if (User-Name =~ /@.*@/ )  -> FALSE
(7)     if (User-Name =~ /\\.\\./ )
(7)     if (User-Name =~ /\\.\\./ )  -> FALSE
(7)     if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))
(7)     if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))   -> FALSE
(7)     if (User-Name =~ /\\.$/)
(7)     if (User-Name =~ /\\.$/)   -> FALSE
(7)     if (User-Name =~ /@\\./)
(7)     if (User-Name =~ /@\\./)   -> FALSE
(7)   } # filter_username filter_username = notfound
(7)   [chap] = noop
(7)   [mschap] = noop
(7)   [digest] = noop
(7) suffix : No '@' in User-Name = "testuser", looking up realm NULL
(7) suffix : No such realm "NULL"
(7)   [suffix] = noop
(7) eap : EAP packet type response id 3 length 80
(7) eap : Continuing tunnel setup.
(7)   [eap] = ok
(7)  } #  authorize = ok
(7) Found Auth-Type = EAP
(7) # Executing group from file /etc/raddb/sites-enabled/default
(7)   authenticate {
(7) eap : Expiring EAP session with state 0xac337ffeaa3066b4
(7) eap : Finished EAP session with state 0xac337ffeaa3066b4
(7) eap : Previous EAP request found for state 0xac337ffeaa3066b4, released
from the list
(7) eap : Peer sent PEAP (25)
(7) eap : EAP PEAP (25)
(7) eap : Calling eap_peap to process EAP data
(7) eap_peap : processing EAP-TLS
(7) eap_peap : eaptls_verify returned 7
(7) eap_peap : Done initial handshake
(7) eap_peap : eaptls_process returned 7
(7) eap_peap : FR_TLS_OK
(7) eap_peap : Session established.  Decoding tunneled attributes.
(7) eap_peap : Peap state WAITING FOR INNER IDENTITY
(7) eap_peap : Identity - testuser
(7) eap_peap : Got inner identity 'testuser'
(7) eap_peap : Setting default EAP type for tunneled EAP session.
(7) eap_peap : Got tunneled request
EAP-Message = 0x0203000d017465737475736572
server default {
(7) eap_peap : Setting User-Name to testuser
Sending tunneled request
EAP-Message = 0x0203000d017465737475736572
FreeRADIUS-Proxied-To = 127.0.0.1
User-Name = 'testuser'
server inner-tunnel {
(7) # Executing section authorize from file
/etc/raddb/sites-enabled/inner-tunnel
(7)   authorize {
(7)   [chap] = noop
(7)   [mschap] = noop
(7) suffix : No '@' in User-Name = "testuser", looking up realm NULL
(7) suffix : No such realm "NULL"
(7)   [suffix] = noop
(7)   update control {
(7) Proxy-To-Realm := 'LOCAL'
(7)   } # update control = noop
(7) eap : EAP packet type response id 3 length 13
(7) eap : EAP-Identity reply, returning 'ok' so we can short-circuit the
rest of authorize
(7)   [eap] = ok
(7)  } #  authorize = ok
(7) Found Auth-Type = EAP
(7) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel
(7)   authenticate {
(7) eap : Peer sent Identity (1)
(7) eap : Calling eap_mschapv2 to process EAP data
(7) eap_mschapv2 : Issuing Challenge
(7) eap : New EAP session, adding 'State' attribute to reply
0xb1be9a22b1ba80a3
(7)   [eap] = handled
(7)  } #  authenticate = handled
} # server inner-tunnel
(7) eap_peap : Got tunneled reply code 11
EAP-Message =
0x010400221a0104001d10027ae9f0cd1c776d593ea7329525024b7465737475736572
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xb1be9a22b1ba80a3164ac945e67a1095
(7) eap_peap : Got tunneled reply RADIUS code 11
EAP-Message =
0x010400221a0104001d10027ae9f0cd1c776d593ea7329525024b7465737475736572
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xb1be9a22b1ba80a3164ac945e67a1095
(7) eap_peap : Got tunneled Access-Challenge
(7) eap : New EAP session, adding 'State' attribute to reply
0xac337ffeab3766b4
(7)   [eap] = handled
(7)  } #  authenticate = handled
Sending Access-Challenge Id 65 from 127.0.0.1:1812 to 127.0.0.1:35433
EAP-Message =
0x0104004b190017030100407891a16aa2b3472c046f41f0e18d7b91991cdd2415e05527ead38adf7c992b7138371115d7410f4dd47175742f6326e25d991fecf1c1664047cbed2d7c4947df
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xac337ffeab3766b44296c44be3bc030a
(7) Finished request
Waking up in 0.3 seconds.
Received Access-Request Id 66 from 127.0.0.1:35433 to 127.0.0.1:1812 length
348
User-Name = 'testuser'
NAS-IP-Address = 127.0.0.1
Called-Station-Id = '04-F0-21-17-94-44:ac-vap-ch149'
NAS-Port-Type = Wireless-802.11
NAS-Port = 1
Calling-Station-Id = '04-F0-21-E7-56-41'
Connect-Info = 'CONNECT 54Mbps 802.11a'
Acct-Session-Id = '55DB92D7-00000006'
X-Ascend-Home-Agent-UDP-Port = 1027076
X-Ascend-Multilink-ID = 1027074
X-Ascend-Num-In-Multilink = 1027073
Framed-MTU = 1400
EAP-Message =
0x02040090190017030100207efb9a41982ebc4831585f9fc96a3aa74e1735a6b09a1be5369a156d6e55ae121703010060ccea57586e02203538208536cb2dfd3bd2e67510b7ea0ec2c7e5b5fd551f38b25ddbe523a7e811878c69856a2770b10af175930120f6db569c878cc39836354de44475593dc6b61c2142896e59ece5f0a38acccc3a4faeee156a41f958399798
State = 0xac337ffeab3766b44296c44be3bc030a
Message-Authenticator = 0x110a83574ebcde0b705ebe475a27cd09
(8) # Executing section authorize from file /etc/raddb/sites-enabled/default
(8)   authorize {
(8)   filter_username filter_username {
(8)     if (User-Name != "%{tolower:%{User-Name}}")
(8) EXPAND %{tolower:%{User-Name}}
(8)    --> testuser
(8)     if (User-Name != "%{tolower:%{User-Name}}")  -> FALSE
(8)     if (User-Name =~ / /)
(8)     if (User-Name =~ / /)  -> FALSE
(8)     if (User-Name =~ /@.*@/ )
(8)     if (User-Name =~ /@.*@/ )  -> FALSE
(8)     if (User-Name =~ /\\.\\./ )
(8)     if (User-Name =~ /\\.\\./ )  -> FALSE
(8)     if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))
(8)     if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))   -> FALSE
(8)     if (User-Name =~ /\\.$/)
(8)     if (User-Name =~ /\\.$/)   -> FALSE
(8)     if (User-Name =~ /@\\./)
(8)     if (User-Name =~ /@\\./)   -> FALSE
(8)   } # filter_username filter_username = notfound
(8)   [chap] = noop
(8)   [mschap] = noop
(8)   [digest] = noop
(8) suffix : No '@' in User-Name = "testuser", looking up realm NULL
(8) suffix : No such realm "NULL"
(8)   [suffix] = noop
(8) eap : EAP packet type response id 4 length 144
(8) eap : Continuing tunnel setup.
(8)   [eap] = ok
(8)  } #  authorize = ok
(8) Found Auth-Type = EAP
(8) # Executing group from file /etc/raddb/sites-enabled/default
(8)   authenticate {
(8) eap : Expiring EAP session with state 0xb1be9a22b1ba80a3
(8) eap : Finished EAP session with state 0xac337ffeab3766b4
(8) eap : Previous EAP request found for state 0xac337ffeab3766b4, released
from the list
(8) eap : Peer sent PEAP (25)
(8) eap : EAP PEAP (25)
(8) eap : Calling eap_peap to process EAP data
(8) eap_peap : processing EAP-TLS
(8) eap_peap : eaptls_verify returned 7
(8) eap_peap : Done initial handshake
(8) eap_peap : eaptls_process returned 7
(8) eap_peap : FR_TLS_OK
(8) eap_peap : Session established.  Decoding tunneled attributes.
(8) eap_peap : Peap state phase2
(8) eap_peap : EAP type MSCHAPv2 (26)
(8) eap_peap : Got tunneled request
EAP-Message =
0x020400431a0204003e31a7bbe3cde881d2e06d41a5b6a44f0d94000000000000000069d59066f3db91279151c9f6dac509f5418c01689cf27420007465737475736572
server default {
(8) eap_peap : Setting User-Name to testuser
Sending tunneled request
EAP-Message =
0x020400431a0204003e31a7bbe3cde881d2e06d41a5b6a44f0d94000000000000000069d59066f3db91279151c9f6dac509f5418c01689cf27420007465737475736572
FreeRADIUS-Proxied-To = 127.0.0.1
User-Name = 'testuser'
State = 0xb1be9a22b1ba80a3164ac945e67a1095
server inner-tunnel {
(8) # Executing section authorize from file
/etc/raddb/sites-enabled/inner-tunnel
(8)   authorize {
(8)   [chap] = noop
(8)   [mschap] = noop
(8) suffix : No '@' in User-Name = "testuser", looking up realm NULL
(8) suffix : No such realm "NULL"
(8)   [suffix] = noop
(8)   update control {
(8) Proxy-To-Realm := 'LOCAL'
(8)   } # update control = noop
(8) eap : EAP packet type response id 4 length 67
(8) eap : No EAP Start, assuming it's an on-going EAP conversation
(8)   [eap] = updated
(8) files : users: Matched entry testuser at line 6
(8)   [files] = ok
(8)   [expiration] = noop
(8)   [logintime] = noop
(8) WARNING: pap : Auth-Type already set.  Not setting to PAP
(8)   [pap] = noop
(8)  } #  authorize = updated
(8) Found Auth-Type = EAP
(8) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel
(8)   authenticate {
(8) eap : Expiring EAP session with state 0xb1be9a22b1ba80a3
(8) eap : Finished EAP session with state 0xb1be9a22b1ba80a3
(8) eap : Previous EAP request found for state 0xb1be9a22b1ba80a3, released
from the list
(8) eap : Peer sent MSCHAPv2 (26)
(8) eap : EAP MSCHAPv2 (26)
(8) eap : Calling eap_mschapv2 to process EAP data
(8) eap_mschapv2 : # Executing group from file
/etc/raddb/sites-enabled/inner-tunnel
(8) eap_mschapv2 :  Auth-Type MS-CHAP {
(8) mschap : Found Cleartext-Password, hashing to create LM-Password
(8) mschap : Found Cleartext-Password, hashing to create NT-Password
(8) mschap : Creating challenge hash with username: testuser
(8) mschap : Client is using MS-CHAPv2
(8) mschap : Adding MS-CHAPv2 MPPE keys
(8)   [mschap] = ok
(8)  } # Auth-Type MS-CHAP = ok
MSCHAP Success
(8) eap : New EAP session, adding 'State' attribute to reply
0xb1be9a22b0bb80a3
(8)   [eap] = handled
(8)  } #  authenticate = handled
} # server inner-tunnel
(8) eap_peap : Got tunneled reply code 11
EAP-Message =
0x010500331a0304002e533d39434644443638374641354143433544414444363231413738393232313443323137324238443136
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xb1be9a22b0bb80a3164ac945e67a1095
(8) eap_peap : Got tunneled reply RADIUS code 11
EAP-Message =
0x010500331a0304002e533d39434644443638374641354143433544414444363231413738393232313443323137324238443136
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xb1be9a22b0bb80a3164ac945e67a1095
(8) eap_peap : Got tunneled Access-Challenge
(8) eap : New EAP session, adding 'State' attribute to reply
0xac337ffea43666b4
(8)   [eap] = handled
(8)  } #  authenticate = handled
Sending Access-Challenge Id 66 from 127.0.0.1:1812 to 127.0.0.1:35433
EAP-Message =
0x0105005b1900170301005088813548ddf94724b53a20fdbc87fd1c46cce9cb304463628b94edbf3ccce0f8db9c8820d2ff1187b5a5410a8485ae18e99d36f48180441d914360a165bb11572625ee26bcb38e940bede46acd1078dd
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xac337ffea43666b44296c44be3bc030a
(8) Finished request
Waking up in 0.3 seconds.
Received Access-Request Id 67 from 127.0.0.1:35433 to 127.0.0.1:1812 length
284
User-Name = 'testuser'
NAS-IP-Address = 127.0.0.1
Called-Station-Id = '04-F0-21-17-94-44:ac-vap-ch149'
NAS-Port-Type = Wireless-802.11
NAS-Port = 1
Calling-Station-Id = '04-F0-21-E7-56-41'
Connect-Info = 'CONNECT 54Mbps 802.11a'
Acct-Session-Id = '55DB92D7-00000006'
X-Ascend-Home-Agent-UDP-Port = 1027076
X-Ascend-Multilink-ID = 1027074
X-Ascend-Num-In-Multilink = 1027073
Framed-MTU = 1400
EAP-Message =
0x0205005019001703010020f09ba916b1bb58e1700e3b1ca5851eee9b039c85e8e6d846367d9d6cca7a68a4170301002091a3f0516ee8f4b1cd8bd7f571ab50adc3a38373ba07180ac04d9511ea3aa4f0
State = 0xac337ffea43666b44296c44be3bc030a
Message-Authenticator = 0x92f7efa862baddcd14f8f37226c93cc4
(9) # Executing section authorize from file /etc/raddb/sites-enabled/default
(9)   authorize {
(9)   filter_username filter_username {
(9)     if (User-Name != "%{tolower:%{User-Name}}")
(9) EXPAND %{tolower:%{User-Name}}
(9)    --> testuser
(9)     if (User-Name != "%{tolower:%{User-Name}}")  -> FALSE
(9)     if (User-Name =~ / /)
(9)     if (User-Name =~ / /)  -> FALSE
(9)     if (User-Name =~ /@.*@/ )
(9)     if (User-Name =~ /@.*@/ )  -> FALSE
(9)     if (User-Name =~ /\\.\\./ )
(9)     if (User-Name =~ /\\.\\./ )  -> FALSE
(9)     if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))
(9)     if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))   -> FALSE
(9)     if (User-Name =~ /\\.$/)
(9)     if (User-Name =~ /\\.$/)   -> FALSE
(9)     if (User-Name =~ /@\\./)
(9)     if (User-Name =~ /@\\./)   -> FALSE
(9)   } # filter_username filter_username = notfound
(9)   [chap] = noop
(9)   [mschap] = noop
(9)   [digest] = noop
(9) suffix : No '@' in User-Name = "testuser", looking up realm NULL
(9) suffix : No such realm "NULL"
(9)   [suffix] = noop
(9) eap : EAP packet type response id 5 length 80
(9) eap : Continuing tunnel setup.
(9)   [eap] = ok
(9)  } #  authorize = ok
(9) Found Auth-Type = EAP
(9) # Executing group from file /etc/raddb/sites-enabled/default
(9)   authenticate {
(9) eap : Expiring EAP session with state 0xb1be9a22b0bb80a3
(9) eap : Finished EAP session with state 0xac337ffea43666b4
(9) eap : Previous EAP request found for state 0xac337ffea43666b4, released
from the list
(9) eap : Peer sent PEAP (25)
(9) eap : EAP PEAP (25)
(9) eap : Calling eap_peap to process EAP data
(9) eap_peap : processing EAP-TLS
(9) eap_peap : eaptls_verify returned 7
(9) eap_peap : Done initial handshake
(9) eap_peap : eaptls_process returned 7
(9) eap_peap : FR_TLS_OK
(9) eap_peap : Session established.  Decoding tunneled attributes.
(9) eap_peap : Peap state phase2
(9) eap_peap : EAP type MSCHAPv2 (26)
(9) eap_peap : Got tunneled request
EAP-Message = 0x020500061a03
server default {
(9) eap_peap : Setting User-Name to testuser
Sending tunneled request
EAP-Message = 0x020500061a03
FreeRADIUS-Proxied-To = 127.0.0.1
User-Name = 'testuser'
State = 0xb1be9a22b0bb80a3164ac945e67a1095
server inner-tunnel {
(9) # Executing section authorize from file
/etc/raddb/sites-enabled/inner-tunnel
(9)   authorize {
(9)   [chap] = noop
(9)   [mschap] = noop
(9) suffix : No '@' in User-Name = "testuser", looking up realm NULL
(9) suffix : No such realm "NULL"
(9)   [suffix] = noop
(9)   update control {
(9) Proxy-To-Realm := 'LOCAL'
(9)   } # update control = noop
(9) eap : EAP packet type response id 5 length 6
(9) eap : EAP-MSCHAPV2 success, returning short-circuit ok
(9)   [eap] = ok
(9)  } #  authorize = ok
(9) Found Auth-Type = EAP
(9) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel
(9)   authenticate {
(9) eap : Expiring EAP session with state 0xb1be9a22b0bb80a3
(9) eap : Finished EAP session with state 0xb1be9a22b0bb80a3
(9) eap : Previous EAP request found for state 0xb1be9a22b0bb80a3, released
from the list
(9) eap : Peer sent MSCHAPv2 (26)
(9) eap : EAP MSCHAPv2 (26)
(9) eap : Calling eap_mschapv2 to process EAP data
(9) eap : Freeing handler
(9)   [eap] = ok
(9)  } #  authenticate = ok
(9) # Executing section post-auth from file
/etc/raddb/sites-enabled/inner-tunnel
(9)  (null) post-auth { ... } # empty sub-section is ignored
} # server inner-tunnel
(9) eap_peap : Got tunneled reply code 2
MS-MPPE-Encryption-Policy = Encryption-Allowed
MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed
MS-MPPE-Send-Key = 0x62b5d44437c16ef3e9639a6e70630dce
MS-MPPE-Recv-Key = 0x53749455e55cad37bb61abd38f93ffde
EAP-Message = 0x03050004
Message-Authenticator = 0x00000000000000000000000000000000
User-Name = 'testuser'
(9) eap_peap : Got tunneled reply RADIUS code 2
MS-MPPE-Encryption-Policy = Encryption-Allowed
MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed
MS-MPPE-Send-Key = 0x62b5d44437c16ef3e9639a6e70630dce
MS-MPPE-Recv-Key = 0x53749455e55cad37bb61abd38f93ffde
EAP-Message = 0x03050004
Message-Authenticator = 0x00000000000000000000000000000000
User-Name = 'testuser'
(9) eap_peap : Tunneled authentication was successful.
(9) eap_peap : SUCCESS
(9) eap : New EAP session, adding 'State' attribute to reply
0xac337ffea53566b4
(9)   [eap] = handled
(9)  } #  authenticate = handled
Sending Access-Challenge Id 67 from 127.0.0.1:1812 to 127.0.0.1:35433
EAP-Message =
0x0106002b19001703010020696438a4d8a852d2b5fd2c3fad99ed06f8a1e864ac9db9c91a10b76df019806b
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xac337ffea53566b44296c44be3bc030a
(9) Finished request
Waking up in 0.2 seconds.
Received Access-Request Id 68 from 127.0.0.1:35433 to 127.0.0.1:1812 length
284
User-Name = 'testuser'
NAS-IP-Address = 127.0.0.1
Called-Station-Id = '04-F0-21-17-94-44:ac-vap-ch149'
NAS-Port-Type = Wireless-802.11
NAS-Port = 1
Calling-Station-Id = '04-F0-21-E7-56-41'
Connect-Info = 'CONNECT 54Mbps 802.11a'
Acct-Session-Id = '55DB92D7-00000006'
X-Ascend-Home-Agent-UDP-Port = 1027076
X-Ascend-Multilink-ID = 1027074
X-Ascend-Num-In-Multilink = 1027073
Framed-MTU = 1400
EAP-Message =
0x02060050190017030100208cd6608dbef4cecccee1609aa390bd34c942a7213e02eef520eaa7c07e3415071703010020fefd8e765597b61f693aa7a85b63f9a76f288bd27597cf75bb04d9465b8dc65a
State = 0xac337ffea53566b44296c44be3bc030a
Message-Authenticator = 0x04686e408fa7398a03cade732d7cd4e0
(10) # Executing section authorize from file
/etc/raddb/sites-enabled/default
(10)   authorize {
(10)   filter_username filter_username {
(10)     if (User-Name != "%{tolower:%{User-Name}}")
(10) EXPAND %{tolower:%{User-Name}}
(10)    --> testuser
(10)     if (User-Name != "%{tolower:%{User-Name}}")  -> FALSE
(10)     if (User-Name =~ / /)
(10)     if (User-Name =~ / /)  -> FALSE
(10)     if (User-Name =~ /@.*@/ )
(10)     if (User-Name =~ /@.*@/ )  -> FALSE
(10)     if (User-Name =~ /\\.\\./ )
(10)     if (User-Name =~ /\\.\\./ )  -> FALSE
(10)     if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))
(10)     if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))   ->
FALSE
(10)     if (User-Name =~ /\\.$/)
(10)     if (User-Name =~ /\\.$/)   -> FALSE
(10)     if (User-Name =~ /@\\./)
(10)     if (User-Name =~ /@\\./)   -> FALSE
(10)   } # filter_username filter_username = notfound
(10)   [chap] = noop
(10)   [mschap] = noop
(10)   [digest] = noop
(10) suffix : No '@' in User-Name = "testuser", looking up realm NULL
(10) suffix : No such realm "NULL"
(10)   [suffix] = noop
(10) eap : EAP packet type response id 6 length 80
(10) eap : Continuing tunnel setup.
(10)   [eap] = ok
(10)  } #  authorize = ok
(10) Found Auth-Type = EAP
(10) # Executing group from file /etc/raddb/sites-enabled/default
(10)   authenticate {
(10) eap : Expiring EAP session with state 0xac337ffea53566b4
(10) eap : Finished EAP session with state 0xac337ffea53566b4
(10) eap : Previous EAP request found for state 0xac337ffea53566b4,
released from the list
(10) eap : Peer sent PEAP (25)
(10) eap : EAP PEAP (25)
(10) eap : Calling eap_peap to process EAP data
(10) eap_peap : processing EAP-TLS
(10) eap_peap : eaptls_verify returned 7
(10) eap_peap : Done initial handshake
(10) eap_peap : eaptls_process returned 7
(10) eap_peap : FR_TLS_OK
(10) eap_peap : Session established.  Decoding tunneled attributes.
(10) eap_peap : Peap state send tlv success
(10) eap_peap : Received EAP-TLV response.
(10) eap_peap : Success
(10) WARNING: eap_peap : No information to cache: session caching will be
disabled for session
2b5c6979693e22cc640a8726e21abfc4da4779a0d349188a0bb6c87d3233ad0d
  SSL: Removing session
2b5c6979693e22cc640a8726e21abfc4da4779a0d349188a0bb6c87d3233ad0d from the
cache
(10) eap : Freeing handler
(10)   [eap] = ok
(10)  } #  authenticate = ok
(10) # Executing section post-auth from file
/etc/raddb/sites-enabled/default
(10)   post-auth {
(10)   [exec] = noop
(10)   remove_reply_message_if_eap remove_reply_message_if_eap {
(10)     if (reply:EAP-Message && reply:Reply-Message)
(10)     if (reply:EAP-Message && reply:Reply-Message)  -> FALSE
(10)    else else {
(10)     [noop] = noop
(10)    } # else else = noop
(10)   } # remove_reply_message_if_eap remove_reply_message_if_eap = noop
(10)  } #  post-auth = noop
Sending Access-Accept Id 68 from 127.0.0.1:1812 to 127.0.0.1:35433
MS-MPPE-Recv-Key =
0xba01a942a8b3dfda0603e53c13c857c7d1a76001693e7ca2d16dec6e0f9b7077
MS-MPPE-Send-Key =
0x6bab05ab2b1e70f9f7509cea40e5f580bea110c5804f19833e6544bb8ea44f56
EAP-Message = 0x03060004
Message-Authenticator = 0x00000000000000000000000000000000
User-Name = 'testuser'
(10) Finished request
Waking up in 0.2 seconds.
Waking up in 4.6 seconds.
(0) Cleaning up request packet ID 58 with timestamp +28
(1) Cleaning up request packet ID 59 with timestamp +28
(2) Cleaning up request packet ID 60 with timestamp +28
(3) Cleaning up request packet ID 61 with timestamp +28
(4) Cleaning up request packet ID 62 with timestamp +28
(5) Cleaning up request packet ID 63 with timestamp +28
(6) Cleaning up request packet ID 64 with timestamp +28
(7) Cleaning up request packet ID 65 with timestamp +28
(8) Cleaning up request packet ID 66 with timestamp +28
(9) Cleaning up request packet ID 67 with timestamp +28
(10) Cleaning up request packet ID 68 with timestamp +28
Ready to process requests.

radiusd output eap-ttls/autheap=md5

[1mradiusd: FreeRADIUS Version 3.0.3, for host x86_64-redhat-linux-gnu,
built on Jun  3 2014 at 12:39:33[0m
[1mCopyright (C) 1999-2014 The FreeRADIUS server project and
contributors[0m
[1mThere is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A[0m
[1mPARTICULAR PURPOSE[0m
[1mYou may redistribute copies of FreeRADIUS under the terms of the[0m
[1mGNU General Public License[0m
[1mFor more information about these matters, see the file named
COPYRIGHT[0m
[1mStarting - reading configuration files ...[0m
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/raddb/dictionary
including configuration file /etc/raddb/radiusd.conf
including configuration file /etc/raddb/proxy.conf
including configuration file /etc/raddb/clients.conf
including files in directory /etc/raddb/mods-enabled/
including configuration file /etc/raddb/mods-enabled/soh
including configuration file /etc/raddb/mods-enabled/linelog
including configuration file /etc/raddb/mods-enabled/pap
including configuration file /etc/raddb/mods-enabled/utf8
including configuration file /etc/raddb/mods-enabled/ntlm_auth
including configuration file /etc/raddb/mods-enabled/eap
including configuration file /etc/raddb/mods-enabled/mschap
including configuration file /etc/raddb/mods-enabled/unix
including configuration file /etc/raddb/mods-enabled/cache_eap
including configuration file /etc/raddb/mods-enabled/files
including configuration file /etc/raddb/mods-enabled/expiration
including configuration file /etc/raddb/mods-enabled/chap
including configuration file /etc/raddb/mods-enabled/passwd
including configuration file /etc/raddb/mods-enabled/expr
including configuration file /etc/raddb/mods-enabled/digest
including configuration file /etc/raddb/mods-enabled/preprocess
including configuration file /etc/raddb/mods-enabled/echo
including configuration file /etc/raddb/mods-enabled/dhcp
including configuration file /etc/raddb/mods-enabled/detail
including configuration file /etc/raddb/mods-enabled/unpack
including configuration file /etc/raddb/mods-enabled/logintime
including configuration file /etc/raddb/mods-enabled/dynamic_clients
including configuration file /etc/raddb/mods-enabled/attr_filter
including configuration file /etc/raddb/mods-enabled/realm
including configuration file /etc/raddb/mods-enabled/always
including configuration file /etc/raddb/mods-enabled/exec
including configuration file /etc/raddb/mods-enabled/replicate
including configuration file /etc/raddb/mods-enabled/radutmp
including configuration file /etc/raddb/mods-enabled/sradutmp
including configuration file /etc/raddb/mods-enabled/detail.log
including files in directory /etc/raddb/policy.d/
including configuration file /etc/raddb/policy.d/operator-name
including configuration file /etc/raddb/policy.d/eap
including configuration file /etc/raddb/policy.d/control
including configuration file /etc/raddb/policy.d/filter
including configuration file /etc/raddb/policy.d/canonicalization
including configuration file /etc/raddb/policy.d/dhcp
including configuration file /etc/raddb/policy.d/accounting
including configuration file /etc/raddb/policy.d/cui
including files in directory /etc/raddb/sites-enabled/
including configuration file /etc/raddb/sites-enabled/default
including configuration file /etc/raddb/sites-enabled/inner-tunnel
main {
 security {
  user = "radiusd"
  group = "radiusd"
  allow_core_dumps = no
 }
}
main {
name = "radiusd"
prefix = "/usr"
localstatedir = "/var"
sbindir = "/usr/sbin"
logdir = "/var/log/radius"
run_dir = "/var/run/radiusd"
libdir = "/usr/lib64/freeradius"
radacctdir = "/var/log/radius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 1024
pidfile = "/var/run/radiusd/radiusd.pid"
checkrad = "/usr/sbin/checkrad"
debug_level = 0
proxy_requests = yes
 log {
  stripped_names = no
  auth = no
  auth_badpass = no
  auth_goodpass = no
  colourise = yes
  msg_denied = "You are already logged in - access denied"
 }
 security {
  max_attributes = 200
  reject_delay = 1
  status_server = yes
  allow_vulnerable_openssl = "CVE-2014-0160"
 }
}
radiusd: #### Loading Realms and Home Servers ####
 proxy server {
  retry_delay = 5
  retry_count = 3
  default_fallback = no
  dead_time = 120
  wake_all_if_all_dead = no
 }
 home_server localhost {
  ipaddr = 127.0.0.1
  port = 1812
  type = "auth"
  secret = <<< secret >>>
  response_window = 20
  max_outstanding = 65536
  zombie_period = 40
  status_check = "status-server"
  ping_interval = 30
  check_interval = 30
  num_answers_to_alive = 3
  revive_interval = 120
  status_check_timeout = 4
  coa {
  irt = 2
  mrt = 16
  mrc = 5
  mrd = 30
  }
  limit {
  max_connections = 16
  max_requests = 0
  lifetime = 0
  idle_timeout = 0
  }
 }
 home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
 }
 realm example.com {
auth_pool = my_auth_failover
 }
 realm LOCAL {
 }
radiusd: #### Loading Clients ####
 client localhost {
  ipaddr = 127.0.0.1
  require_message_authenticator = no
  secret = <<< secret >>>
  nas_type = "other"
  proto = "*"
  limit {
  max_connections = 16
  lifetime = 0
  idle_timeout = 30
  }
 }
radiusd: #### Instantiating modules ####
 instantiate {
 }
 modules {
  # Loaded module rlm_soh
  # Instantiating module "soh" from file /etc/raddb/mods-enabled/soh
  soh {
  dhcp = yes
  }
  # Loaded module rlm_linelog
  # Instantiating module "linelog" from file /etc/raddb/mods-enabled/linelog
  linelog {
  filename = "/var/log/radius/linelog"
  permissions = 384
  format = "This is a log message for %{User-Name}"
  reference = "messages.%{%{Packet-Type}:-default}"
  }
  # Instantiating module "log_accounting" from file
/etc/raddb/mods-enabled/linelog
  linelog log_accounting {
  filename = "/var/log/radius/linelog-accounting"
  permissions = 384
  format = ""
  reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
  }
  # Loaded module rlm_pap
  # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap
  pap {
  normalise = yes
  }
  # Loaded module rlm_utf8
  # Instantiating module "utf8" from file /etc/raddb/mods-enabled/utf8
  # Loaded module rlm_exec
  # Instantiating module "ntlm_auth" from file
/etc/raddb/mods-enabled/ntlm_auth
  exec ntlm_auth {
  wait = yes
  program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN
--username=%{mschap:User-Name} --password=%{User-Password}"
  shell_escape = yes
  }
  # Loaded module rlm_eap
  # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap
  eap {
  default_eap_type = "md5"
  timer_expire = 60
  ignore_unknown_eap_types = no
  mod_accounting_username_bug = no
  max_sessions = 1024
  }
   # Linked to sub-module rlm_eap_md5
   # Linked to sub-module rlm_eap_leap
   # Linked to sub-module rlm_eap_gtc
   gtc {
    challenge = "Password: "
    auth_type = "PAP"
   }
   # Linked to sub-module rlm_eap_tls
   tls {
    tls = "tls-common"
   }
   tls-config tls-common {
    rsa_key_exchange = no
    dh_key_exchange = yes
    rsa_key_length = 512
    dh_key_length = 512
    verify_depth = 0
    ca_path = "/etc/raddb/certs"
    pem_file_type = yes
    private_key_file = "/etc/raddb/certs/server.pem"
    certificate_file = "/etc/raddb/certs/server.pem"
    ca_file = "/etc/raddb/certs/ca.pem"
    private_key_password = <<< secret >>>
    dh_file = "/etc/raddb/certs/dh"
    fragment_size = 1024
    include_length = yes
    check_crl = no
    cipher_list = "DEFAULT"
    ecdh_curve = "prime256v1"
    cache {
    enable = yes
    lifetime = 24
    max_entries = 255
    }
    verify {
    }
    ocsp {
    enable = no
    override_cert_url = yes
    url = "http://127.0.0.1/ocsp/"
    use_nonce = yes
    timeout = 0
    softfail = yes
    }
   }
   # Linked to sub-module rlm_eap_ttls
   ttls {
    tls = "tls-common"
    default_eap_type = "md5"
    copy_request_to_tunnel = no
    use_tunneled_reply = no
    virtual_server = "inner-tunnel"
    include_length = yes
    require_client_cert = no
   }
Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_peap
   peap {
    tls = "tls-common"
    default_method = "mschapv2"
    copy_request_to_tunnel = no
    use_tunneled_reply = no
    proxy_tunneled_request_as_eap = yes
    virtual_server = "inner-tunnel"
    soh = no
    require_client_cert = no
   }
Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_mschapv2
   mschapv2 {
    with_ntdomain_hack = no
    send_error = no
   }
  # Loaded module rlm_mschap
  # Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap
  mschap {
  use_mppe = yes
  require_encryption = no
  require_strong = no
  with_ntdomain_hack = yes
   passchange {
   }
  allow_retry = yes
  }
  # Loaded module rlm_unix
  # Instantiating module "unix" from file /etc/raddb/mods-enabled/unix
  unix {
  radwtmp = "/var/log/radius/radwtmp"
  }
  # Loaded module rlm_cache
  # Instantiating module "cache_eap" from file
/etc/raddb/mods-enabled/cache_eap
  cache cache_eap {
  key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
  ttl = 15
  max_entries = 16384
  epoch = 0
  add_stats = no
  }
  # Loaded module rlm_files
  # Instantiating module "files" from file /etc/raddb/mods-enabled/files
  files {
  filename = "/etc/raddb/mods-config/files/authorize"
  usersfile = "/etc/raddb/mods-config/files/authorize"
  acctusersfile = "/etc/raddb/mods-config/files/accounting"
  preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy"
  compat = "cistron"
  }
reading pairlist file /etc/raddb/mods-config/files/authorize
[/etc/raddb/mods-config/files/authorize]:2 Cistron compatibility checks for
entry lanforge ...
[/etc/raddb/mods-config/files/authorize]:6 Cistron compatibility checks for
entry testuser ...
[/etc/raddb/mods-config/files/authorize]:188 Cistron compatibility checks
for entry DEFAULT ...
[/etc/raddb/mods-config/files/authorize]:195 Cistron compatibility checks
for entry DEFAULT ...
[/etc/raddb/mods-config/files/authorize]:202 Cistron compatibility checks
for entry DEFAULT ...
reading pairlist file /etc/raddb/mods-config/files/authorize
[/etc/raddb/mods-config/files/authorize]:2 Cistron compatibility checks for
entry lanforge ...
[/etc/raddb/mods-config/files/authorize]:6 Cistron compatibility checks for
entry testuser ...
[/etc/raddb/mods-config/files/authorize]:188 Cistron compatibility checks
for entry DEFAULT ...
[/etc/raddb/mods-config/files/authorize]:195 Cistron compatibility checks
for entry DEFAULT ...
[/etc/raddb/mods-config/files/authorize]:202 Cistron compatibility checks
for entry DEFAULT ...
reading pairlist file /etc/raddb/mods-config/files/accounting
reading pairlist file /etc/raddb/mods-config/files/pre-proxy
  # Loaded module rlm_expiration
  # Instantiating module "expiration" from file
/etc/raddb/mods-enabled/expiration
  # Loaded module rlm_chap
  # Instantiating module "chap" from file /etc/raddb/mods-enabled/chap
  # Loaded module rlm_passwd
  # Instantiating module "etc_passwd" from file
/etc/raddb/mods-enabled/passwd
  passwd etc_passwd {
  filename = "/etc/passwd"
  format = "*User-Name:Crypt-Password:"
  delimiter = ":"
  ignore_nislike = no
  ignore_empty = yes
  allow_multiple_keys = no
  hash_size = 100
  }
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
  # Loaded module rlm_expr
  # Instantiating module "expr" from file /etc/raddb/mods-enabled/expr
  expr {
  safe_characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
  }
  # Loaded module rlm_digest
  # Instantiating module "digest" from file /etc/raddb/mods-enabled/digest
  # Loaded module rlm_preprocess
  # Instantiating module "preprocess" from file
/etc/raddb/mods-enabled/preprocess
  preprocess {
  huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups"
  hints = "/etc/raddb/mods-config/preprocess/hints"
  with_ascend_hack = no
  ascend_channels_per_line = 23
  with_ntdomain_hack = no
  with_specialix_jetstream_hack = no
  with_cisco_vsa_hack = no
  with_alvarion_vsa_hack = no
  }
reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups
reading pairlist file /etc/raddb/mods-config/preprocess/hints
  # Instantiating module "echo" from file /etc/raddb/mods-enabled/echo
  exec echo {
  wait = yes
  program = "/bin/echo %{User-Name}"
  input_pairs = "request"
  output_pairs = "reply"
  shell_escape = yes
  }
  # Loaded module rlm_dhcp
  # Instantiating module "dhcp" from file /etc/raddb/mods-enabled/dhcp
  # Loaded module rlm_detail
  # Instantiating module "detail" from file /etc/raddb/mods-enabled/detail
  detail {
  filename =
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  log_packet_header = no
  }
  # Loaded module rlm_unpack
  # Instantiating module "unpack" from file /etc/raddb/mods-enabled/unpack
  # Loaded module rlm_logintime
  # Instantiating module "logintime" from file
/etc/raddb/mods-enabled/logintime
  logintime {
  minimum_timeout = 60
  }
  # Loaded module rlm_dynamic_clients
  # Instantiating module "dynamic_clients" from file
/etc/raddb/mods-enabled/dynamic_clients
  # Loaded module rlm_attr_filter
  # Instantiating module "attr_filter.post-proxy" from file
/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.post-proxy {
  filename = "/etc/raddb/mods-config/attr_filter/post-proxy"
  key = "%{Realm}"
  relaxed = no
  }
reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy
  # Instantiating module "attr_filter.pre-proxy" from file
/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.pre-proxy {
  filename = "/etc/raddb/mods-config/attr_filter/pre-proxy"
  key = "%{Realm}"
  relaxed = no
  }
reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy
  # Instantiating module "attr_filter.access_reject" from file
/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.access_reject {
  filename = "/etc/raddb/mods-config/attr_filter/access_reject"
  key = "%{User-Name}"
  relaxed = no
  }
reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject
  # Instantiating module "attr_filter.access_challenge" from file
/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.access_challenge {
  filename = "/etc/raddb/mods-config/attr_filter/access_challenge"
  key = "%{User-Name}"
  relaxed = no
  }
reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge
  # Instantiating module "attr_filter.accounting_response" from file
/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.accounting_response {
  filename = "/etc/raddb/mods-config/attr_filter/accounting_response"
  key = "%{User-Name}"
  relaxed = no
  }
reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response
  # Loaded module rlm_realm
  # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm
  realm IPASS {
  format = "prefix"
  delimiter = "/"
  ignore_default = no
  ignore_null = no
  }
  # Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm
  realm suffix {
  format = "suffix"
  delimiter = "@"
  ignore_default = no
  ignore_null = no
  }
  # Instantiating module "realmpercent" from file
/etc/raddb/mods-enabled/realm
  realm realmpercent {
  format = "suffix"
  delimiter = "%"
  ignore_default = no
  ignore_null = no
  }
  # Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm
  realm ntdomain {
  format = "prefix"
  delimiter = "\"
  ignore_default = no
  ignore_null = no
  }
  # Loaded module rlm_always
  # Instantiating module "reject" from file /etc/raddb/mods-enabled/always
  always reject {
  rcode = "reject"
  simulcount = 0
  mpp = no
  }
  # Instantiating module "fail" from file /etc/raddb/mods-enabled/always
  always fail {
  rcode = "fail"
  simulcount = 0
  mpp = no
  }
  # Instantiating module "ok" from file /etc/raddb/mods-enabled/always
  always ok {
  rcode = "ok"
  simulcount = 0
  mpp = no
  }
  # Instantiating module "handled" from file /etc/raddb/mods-enabled/always
  always handled {
  rcode = "handled"
  simulcount = 0
  mpp = no
  }
  # Instantiating module "invalid" from file /etc/raddb/mods-enabled/always
  always invalid {
  rcode = "invalid"
  simulcount = 0
  mpp = no
  }
  # Instantiating module "userlock" from file /etc/raddb/mods-enabled/always
  always userlock {
  rcode = "userlock"
  simulcount = 0
  mpp = no
  }
  # Instantiating module "notfound" from file /etc/raddb/mods-enabled/always
  always notfound {
  rcode = "notfound"
  simulcount = 0
  mpp = no
  }
  # Instantiating module "noop" from file /etc/raddb/mods-enabled/always
  always noop {
  rcode = "noop"
  simulcount = 0
  mpp = no
  }
  # Instantiating module "updated" from file /etc/raddb/mods-enabled/always
  always updated {
  rcode = "updated"
  simulcount = 0
  mpp = no
  }
  # Instantiating module "exec" from file /etc/raddb/mods-enabled/exec
  exec {
  wait = no
  input_pairs = "request"
  shell_escape = yes
  timeout = 10
  }
  # Loaded module rlm_replicate
  # Instantiating module "replicate" from file
/etc/raddb/mods-enabled/replicate
  # Loaded module rlm_radutmp
  # Instantiating module "radutmp" from file /etc/raddb/mods-enabled/radutmp
  radutmp {
  filename = "/var/log/radius/radutmp"
  username = "%{User-Name}"
  case_sensitive = yes
  check_with_nas = yes
  permissions = 384
  caller_id = yes
  }
  # Instantiating module "sradutmp" from file
/etc/raddb/mods-enabled/sradutmp
  radutmp sradutmp {
  filename = "/var/log/radius/sradutmp"
  username = "%{User-Name}"
  case_sensitive = yes
  check_with_nas = yes
  permissions = 420
  caller_id = no
  }
  # Instantiating module "auth_log" from file
/etc/raddb/mods-enabled/detail.log
  detail auth_log {
  filename =
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  log_packet_header = no
  }
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
detail output
  # Instantiating module "reply_log" from file
/etc/raddb/mods-enabled/detail.log
  detail reply_log {
  filename =
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  log_packet_header = no
  }
  # Instantiating module "pre_proxy_log" from file
/etc/raddb/mods-enabled/detail.log
  detail pre_proxy_log {
  filename =
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  log_packet_header = no
  }
  # Instantiating module "post_proxy_log" from file
/etc/raddb/mods-enabled/detail.log
  detail post_proxy_log {
  filename =
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  log_packet_header = no
  }
 } # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/raddb/radiusd.conf
} # server
server default { # from file /etc/raddb/sites-enabled/default
 # Creating Auth-Type = digest
 # Loading authenticate {...}
 # Loading authorize {...}
Ignoring "sql" (see raddb/mods-available/README.rst)
Ignoring "ldap" (see raddb/mods-available/README.rst)
 # Loading preacct {...}
 # Loading accounting {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
} # server default
server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel
 # Loading authenticate {...}
 # Loading authorize {...}
 # Loading session {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
} # server inner-tunnel
radiusd: #### Opening IP addresses and Ports ####
listen {
  type = "auth"
  ipaddr = *
  port = 0
   limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
   }
}
listen {
  type = "acct"
  ipaddr = *
  port = 0
   limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
   }
}
listen {
  type = "auth"
  ipaddr = 127.0.0.1
  port = 18120
}
Listening on auth address * port 1812 as server default
Listening on acct address * port 1813 as server default
Listening on auth address 127.0.0.1 port 18120 as server inner-tunnel
Opening new proxy socket 'proxy address * port 0'
Listening on proxy address * port 46457
Ready to process requests.
Received Access-Request Id 69 from 127.0.0.1:35433 to 127.0.0.1:1812 length
199
User-Name = 'testuser'
NAS-IP-Address = 127.0.0.1
Called-Station-Id = '04-F0-21-17-94-44:ac-vap-ch149'
NAS-Port-Type = Wireless-802.11
NAS-Port = 1
Calling-Station-Id = '04-F0-21-E7-56-41'
Connect-Info = 'CONNECT 54Mbps 802.11a'
Acct-Session-Id = '55DB92D7-00000007'
X-Ascend-Home-Agent-UDP-Port = 1027076
X-Ascend-Multilink-ID = 1027074
X-Ascend-Num-In-Multilink = 1027073
Framed-MTU = 1400
EAP-Message = 0x025c000d017465737475736572
Message-Authenticator = 0x1e1963353af55f1a65eb716257a1e5ec
(0) # Executing section authorize from file /etc/raddb/sites-enabled/default
(0)   authorize {
(0)   filter_username filter_username {
(0)     if (User-Name != "%{tolower:%{User-Name}}")
(0) EXPAND %{tolower:%{User-Name}}
(0)    --> testuser
(0)     if (User-Name != "%{tolower:%{User-Name}}")  -> FALSE
(0)     if (User-Name =~ / /)
(0)     if (User-Name =~ / /)  -> FALSE
(0)     if (User-Name =~ /@.*@/ )
(0)     if (User-Name =~ /@.*@/ )  -> FALSE
(0)     if (User-Name =~ /\\.\\./ )
(0)     if (User-Name =~ /\\.\\./ )  -> FALSE
(0)     if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))
(0)     if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))   -> FALSE
(0)     if (User-Name =~ /\\.$/)
(0)     if (User-Name =~ /\\.$/)   -> FALSE
(0)     if (User-Name =~ /@\\./)
(0)     if (User-Name =~ /@\\./)   -> FALSE
(0)   } # filter_username filter_username = notfound
(0)   [chap] = noop
(0)   [mschap] = noop
(0)   [digest] = noop
(0) suffix : No '@' in User-Name = "testuser", looking up realm NULL
(0) suffix : No such realm "NULL"
(0)   [suffix] = noop
(0) eap : EAP packet type response id 92 length 13
(0) eap : EAP-Identity reply, returning 'ok' so we can short-circuit the
rest of authorize
(0)   [eap] = ok
(0)  } #  authorize = ok
(0) Found Auth-Type = EAP
(0) # Executing group from file /etc/raddb/sites-enabled/default
(0)   authenticate {
(0) eap : Peer sent Identity (1)
(0) eap : Calling eap_md5 to process EAP data
(0) eap_md5 : Issuing MD5 Challenge
(0) eap : New EAP session, adding 'State' attribute to reply
0x50d301f2508e05e4
(0)   [eap] = handled
(0)  } #  authenticate = handled
Sending Access-Challenge Id 69 from 127.0.0.1:1812 to 127.0.0.1:35433
EAP-Message = 0x015d00160410b3641ca954151e4533a20422cc0d5499
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x50d301f2508e05e49f3c072d4998f54e
(0) Finished request
Waking up in 0.3 seconds.
Received Access-Request Id 70 from 127.0.0.1:35433 to 127.0.0.1:1812 length
210
User-Name = 'testuser'
NAS-IP-Address = 127.0.0.1
Called-Station-Id = '04-F0-21-17-94-44:ac-vap-ch149'
NAS-Port-Type = Wireless-802.11
NAS-Port = 1
Calling-Station-Id = '04-F0-21-E7-56-41'
Connect-Info = 'CONNECT 54Mbps 802.11a'
Acct-Session-Id = '55DB92D7-00000007'
X-Ascend-Home-Agent-UDP-Port = 1027076
X-Ascend-Multilink-ID = 1027074
X-Ascend-Num-In-Multilink = 1027073
Framed-MTU = 1400
EAP-Message = 0x025d00060315
State = 0x50d301f2508e05e49f3c072d4998f54e
Message-Authenticator = 0x72f583eed65978a196eef4b1230c8969
(1) # Executing section authorize from file /etc/raddb/sites-enabled/default
(1)   authorize {
(1)   filter_username filter_username {
(1)     if (User-Name != "%{tolower:%{User-Name}}")
(1) EXPAND %{tolower:%{User-Name}}
(1)    --> testuser
(1)     if (User-Name != "%{tolower:%{User-Name}}")  -> FALSE
(1)     if (User-Name =~ / /)
(1)     if (User-Name =~ / /)  -> FALSE
(1)     if (User-Name =~ /@.*@/ )
(1)     if (User-Name =~ /@.*@/ )  -> FALSE
(1)     if (User-Name =~ /\\.\\./ )
(1)     if (User-Name =~ /\\.\\./ )  -> FALSE
(1)     if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))
(1)     if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))   -> FALSE
(1)     if (User-Name =~ /\\.$/)
(1)     if (User-Name =~ /\\.$/)   -> FALSE
(1)     if (User-Name =~ /@\\./)
(1)     if (User-Name =~ /@\\./)   -> FALSE
(1)   } # filter_username filter_username = notfound
(1)   [chap] = noop
(1)   [mschap] = noop
(1)   [digest] = noop
(1) suffix : No '@' in User-Name = "testuser", looking up realm NULL
(1) suffix : No such realm "NULL"
(1)   [suffix] = noop
(1) eap : EAP packet type response id 93 length 6
(1) eap : No EAP Start, assuming it's an on-going EAP conversation
(1)   [eap] = updated
(1) files : users: Matched entry testuser at line 6
(1)   [files] = ok
(1)   [expiration] = noop
(1)   [logintime] = noop
(1) WARNING: pap : Auth-Type already set.  Not setting to PAP
(1)   [pap] = noop
(1)  } #  authorize = updated
(1) Found Auth-Type = EAP
(1) # Executing group from file /etc/raddb/sites-enabled/default
(1)   authenticate {
(1) eap : Expiring EAP session with state 0x50d301f2508e05e4
(1) eap : Finished EAP session with state 0x50d301f2508e05e4
(1) eap : Previous EAP request found for state 0x50d301f2508e05e4, released
from the list
(1) eap : Peer sent NAK (3)
(1) eap : Found mutually acceptable type TTLS (21)
(1) eap : Calling eap_ttls to process EAP data
(1) eap_ttls : Flushing SSL sessions (of #0)
(1) eap_ttls : Initiate
(1) eap_ttls : Start returned 1
(1) eap : New EAP session, adding 'State' attribute to reply
0x50d301f2518d14e4
(1)   [eap] = handled
(1)  } #  authenticate = handled
Sending Access-Challenge Id 70 from 127.0.0.1:1812 to 127.0.0.1:35433
EAP-Message = 0x015e00061520
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x50d301f2518d14e49f3c072d4998f54e
(1) Finished request
Waking up in 0.3 seconds.
Received Access-Request Id 71 from 127.0.0.1:35433 to 127.0.0.1:1812 length
455
User-Name = 'testuser'
NAS-IP-Address = 127.0.0.1
Called-Station-Id = '04-F0-21-17-94-44:ac-vap-ch149'
NAS-Port-Type = Wireless-802.11
NAS-Port = 1
Calling-Station-Id = '04-F0-21-E7-56-41'
Connect-Info = 'CONNECT 54Mbps 802.11a'
Acct-Session-Id = '55DB92D7-00000007'
X-Ascend-Home-Agent-UDP-Port = 1027076
X-Ascend-Multilink-ID = 1027074
X-Ascend-Num-In-Multilink = 1027073
Framed-MTU = 1400
EAP-Message =
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
State = 0x50d301f2518d14e49f3c072d4998f54e
Message-Authenticator = 0xcd476cd25bce3078ad79a7fc0114694e
(2) # Executing section authorize from file /etc/raddb/sites-enabled/default
(2)   authorize {
(2)   filter_username filter_username {
(2)     if (User-Name != "%{tolower:%{User-Name}}")
(2) EXPAND %{tolower:%{User-Name}}
(2)    --> testuser
(2)     if (User-Name != "%{tolower:%{User-Name}}")  -> FALSE
(2)     if (User-Name =~ / /)
(2)     if (User-Name =~ / /)  -> FALSE
(2)     if (User-Name =~ /@.*@/ )
(2)     if (User-Name =~ /@.*@/ )  -> FALSE
(2)     if (User-Name =~ /\\.\\./ )
(2)     if (User-Name =~ /\\.\\./ )  -> FALSE
(2)     if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))
(2)     if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))   -> FALSE
(2)     if (User-Name =~ /\\.$/)
(2)     if (User-Name =~ /\\.$/)   -> FALSE
(2)     if (User-Name =~ /@\\./)
(2)     if (User-Name =~ /@\\./)   -> FALSE
(2)   } # filter_username filter_username = notfound
(2)   [chap] = noop
(2)   [mschap] = noop
(2)   [digest] = noop
(2) suffix : No '@' in User-Name = "testuser", looking up realm NULL
(2) suffix : No such realm "NULL"
(2)   [suffix] = noop
(2) eap : EAP packet type response id 94 length 251
(2) eap : Continuing tunnel setup.
(2)   [eap] = ok
(2)  } #  authorize = ok
(2) Found Auth-Type = EAP
(2) # Executing group from file /etc/raddb/sites-enabled/default
(2)   authenticate {
(2) eap : Expiring EAP session with state 0x50d301f2518d14e4
(2) eap : Finished EAP session with state 0x50d301f2518d14e4
(2) eap : Previous EAP request found for state 0x50d301f2518d14e4, released
from the list
(2) eap : Peer sent TTLS (21)
(2) eap : EAP TTLS (21)
(2) eap : Calling eap_ttls to process EAP data
(2) eap_ttls : Authenticate
(2) eap_ttls : processing EAP-TLS
(2) eap_ttls : eaptls_verify returned 7
(2) eap_ttls : Done initial handshake
(2) eap_ttls :     (other): before/accept initialization
(2) eap_ttls :     TLS_accept: before/accept initialization
(2) eap_ttls : <<< TLS 1.0 Handshake [length 00f0], ClientHello
(2) eap_ttls :     TLS_accept: SSLv3 read client hello A
(2) eap_ttls : >>> TLS 1.0 Handshake [length 005e], ServerHello
(2) eap_ttls :     TLS_accept: SSLv3 write server hello A
(2) eap_ttls : >>> TLS 1.0 Handshake [length 0919], Certificate
(2) eap_ttls :     TLS_accept: SSLv3 write certificate A
(2) eap_ttls : >>> TLS 1.0 Handshake [length 014b], ServerKeyExchange
(2) eap_ttls :     TLS_accept: SSLv3 write key exchange A
(2) eap_ttls : >>> TLS 1.0 Handshake [length 0004], ServerHelloDone
(2) eap_ttls :     TLS_accept: SSLv3 write server done A
(2) eap_ttls :     TLS_accept: SSLv3 flush data
(2) eap_ttls :     TLS_accept: Need to read more data: SSLv3 read client
certificate A
In SSL Handshake Phase
In SSL Accept mode
(2) eap_ttls : eaptls_process returned 13
(2) eap : New EAP session, adding 'State' attribute to reply
0x50d301f2528c14e4
(2)   [eap] = handled
(2)  } #  authenticate = handled
Sending Access-Challenge Id 71 from 127.0.0.1:1812 to 127.0.0.1:35433
EAP-Message =
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
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x50d301f2528c14e49f3c072d4998f54e
(2) Finished request
Waking up in 0.3 seconds.
Received Access-Request Id 72 from 127.0.0.1:35433 to 127.0.0.1:1812 length
210
User-Name = 'testuser'
NAS-IP-Address = 127.0.0.1
Called-Station-Id = '04-F0-21-17-94-44:ac-vap-ch149'
NAS-Port-Type = Wireless-802.11
NAS-Port = 1
Calling-Station-Id = '04-F0-21-E7-56-41'
Connect-Info = 'CONNECT 54Mbps 802.11a'
Acct-Session-Id = '55DB92D7-00000007'
X-Ascend-Home-Agent-UDP-Port = 1027076
X-Ascend-Multilink-ID = 1027074
X-Ascend-Num-In-Multilink = 1027073
Framed-MTU = 1400
EAP-Message = 0x025f00061500
State = 0x50d301f2528c14e49f3c072d4998f54e
Message-Authenticator = 0x0d0c97b08ee84812e23243f4490db586
(3) # Executing section authorize from file /etc/raddb/sites-enabled/default
(3)   authorize {
(3)   filter_username filter_username {
(3)     if (User-Name != "%{tolower:%{User-Name}}")
(3) EXPAND %{tolower:%{User-Name}}
(3)    --> testuser
(3)     if (User-Name != "%{tolower:%{User-Name}}")  -> FALSE
(3)     if (User-Name =~ / /)
(3)     if (User-Name =~ / /)  -> FALSE
(3)     if (User-Name =~ /@.*@/ )
(3)     if (User-Name =~ /@.*@/ )  -> FALSE
(3)     if (User-Name =~ /\\.\\./ )
(3)     if (User-Name =~ /\\.\\./ )  -> FALSE
(3)     if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))
(3)     if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))   -> FALSE
(3)     if (User-Name =~ /\\.$/)
(3)     if (User-Name =~ /\\.$/)   -> FALSE
(3)     if (User-Name =~ /@\\./)
(3)     if (User-Name =~ /@\\./)   -> FALSE
(3)   } # filter_username filter_username = notfound
(3)   [chap] = noop
(3)   [mschap] = noop
(3)   [digest] = noop
(3) suffix : No '@' in User-Name = "testuser", looking up realm NULL
(3) suffix : No such realm "NULL"
(3)   [suffix] = noop
(3) eap : EAP packet type response id 95 length 6
(3) eap : Continuing tunnel setup.
(3)   [eap] = ok
(3)  } #  authorize = ok
(3) Found Auth-Type = EAP
(3) # Executing group from file /etc/raddb/sites-enabled/default
(3)   authenticate {
(3) eap : Expiring EAP session with state 0x50d301f2528c14e4
(3) eap : Finished EAP session with state 0x50d301f2528c14e4
(3) eap : Previous EAP request found for state 0x50d301f2528c14e4, released
from the list
(3) eap : Peer sent TTLS (21)
(3) eap : EAP TTLS (21)
(3) eap : Calling eap_ttls to process EAP data
(3) eap_ttls : Authenticate
(3) eap_ttls : processing EAP-TLS
(3) eap_ttls : Received TLS ACK
(3) eap_ttls : Received TLS ACK
(3) eap_ttls : ACK handshake fragment handler
(3) eap_ttls : eaptls_verify returned 1
(3) eap_ttls : eaptls_process returned 13
(3) eap : New EAP session, adding 'State' attribute to reply
0x50d301f253b314e4
(3)   [eap] = handled
(3)  } #  authenticate = handled
Sending Access-Challenge Id 72 from 127.0.0.1:1812 to 127.0.0.1:35433
EAP-Message =
0x016003ec15c000000ada0bb6c0da3a6f7818873f0279d606e0aeb56f2c2fff8928c6c5eef941db3bc116bbefb9eaa41733c0aa19ab2d764b47e75056a665144fbb09951b20559e50ad910303fd0f3c1eae82526b96e604e51e0e78c5b93b85044d1f27ef07b017dd151e74a778d28c73caa95dee831fc8fa6c02c98d0d8606d2f2a72e7aa15715a710ef07e3e73c76c87c5a5ddee6427a00050f3082050b308203f3a003020102020900a2f025aae13c9c30300d06092a864886f70d01010505003081a1310b3009060355040613025553310b30090603550408130257413111300f060355040713084665726e64616c6531223020060355040a131943616e64656c6120546563686e6f6c6f6769657320496e632e3126302406092a864886f70d0109011617737570706f72744063616e64656c61746563682e636f6d312630240603550403131d4578616d706c6520436572746966696361746520417574686f72697479301e170d3135303332343139303335385a170d3238313133303139303335385a3081a1310b3009060355040613025553310b30090603550408130257413111300f060355040713084665726e64616c6531223020060355040a131943616e64656c6120546563686e6f6c6f6769657320496e632e3126302406092a864886f70d0109011617737570706f72744063616e646
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x50d301f253b314e49f3c072d4998f54e
(3) Finished request
Waking up in 0.3 seconds.
Received Access-Request Id 73 from 127.0.0.1:35433 to 127.0.0.1:1812 length
210
User-Name = 'testuser'
NAS-IP-Address = 127.0.0.1
Called-Station-Id = '04-F0-21-17-94-44:ac-vap-ch149'
NAS-Port-Type = Wireless-802.11
NAS-Port = 1
Calling-Station-Id = '04-F0-21-E7-56-41'
Connect-Info = 'CONNECT 54Mbps 802.11a'
Acct-Session-Id = '55DB92D7-00000007'
X-Ascend-Home-Agent-UDP-Port = 1027076
X-Ascend-Multilink-ID = 1027074
X-Ascend-Num-In-Multilink = 1027073
Framed-MTU = 1400
EAP-Message = 0x026000061500
State = 0x50d301f253b314e49f3c072d4998f54e
Message-Authenticator = 0x908f1679efeb92e028fc30a7dcb9b7ba
(4) # Executing section authorize from file /etc/raddb/sites-enabled/default
(4)   authorize {
(4)   filter_username filter_username {
(4)     if (User-Name != "%{tolower:%{User-Name}}")
(4) EXPAND %{tolower:%{User-Name}}
(4)    --> testuser
(4)     if (User-Name != "%{tolower:%{User-Name}}")  -> FALSE
(4)     if (User-Name =~ / /)
(4)     if (User-Name =~ / /)  -> FALSE
(4)     if (User-Name =~ /@.*@/ )
(4)     if (User-Name =~ /@.*@/ )  -> FALSE
(4)     if (User-Name =~ /\\.\\./ )
(4)     if (User-Name =~ /\\.\\./ )  -> FALSE
(4)     if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))
(4)     if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))   -> FALSE
(4)     if (User-Name =~ /\\.$/)
(4)     if (User-Name =~ /\\.$/)   -> FALSE
(4)     if (User-Name =~ /@\\./)
(4)     if (User-Name =~ /@\\./)   -> FALSE
(4)   } # filter_username filter_username = notfound
(4)   [chap] = noop
(4)   [mschap] = noop
(4)   [digest] = noop
(4) suffix : No '@' in User-Name = "testuser", looking up realm NULL
(4) suffix : No such realm "NULL"
(4)   [suffix] = noop
(4) eap : EAP packet type response id 96 length 6
(4) eap : Continuing tunnel setup.
(4)   [eap] = ok
(4)  } #  authorize = ok
(4) Found Auth-Type = EAP
(4) # Executing group from file /etc/raddb/sites-enabled/default
(4)   authenticate {
(4) eap : Expiring EAP session with state 0x50d301f253b314e4
(4) eap : Finished EAP session with state 0x50d301f253b314e4
(4) eap : Previous EAP request found for state 0x50d301f253b314e4, released
from the list
(4) eap : Peer sent TTLS (21)
(4) eap : EAP TTLS (21)
(4) eap : Calling eap_ttls to process EAP data
(4) eap_ttls : Authenticate
(4) eap_ttls : processing EAP-TLS
(4) eap_ttls : Received TLS ACK
(4) eap_ttls : Received TLS ACK
(4) eap_ttls : ACK handshake fragment handler
(4) eap_ttls : eaptls_verify returned 1
(4) eap_ttls : eaptls_process returned 13
(4) eap : New EAP session, adding 'State' attribute to reply
0x50d301f254b214e4
(4)   [eap] = handled
(4)  } #  authenticate = handled
Sending Access-Challenge Id 73 from 127.0.0.1:1812 to 127.0.0.1:35433
EAP-Message =
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
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x50d301f254b214e49f3c072d4998f54e
(4) Finished request
Waking up in 0.3 seconds.
Received Access-Request Id 74 from 127.0.0.1:35433 to 127.0.0.1:1812 length
344
User-Name = 'testuser'
NAS-IP-Address = 127.0.0.1
Called-Station-Id = '04-F0-21-17-94-44:ac-vap-ch149'
NAS-Port-Type = Wireless-802.11
NAS-Port = 1
Calling-Station-Id = '04-F0-21-E7-56-41'
Connect-Info = 'CONNECT 54Mbps 802.11a'
Acct-Session-Id = '55DB92D7-00000007'
X-Ascend-Home-Agent-UDP-Port = 1027076
X-Ascend-Multilink-ID = 1027074
X-Ascend-Num-In-Multilink = 1027073
Framed-MTU = 1400
EAP-Message =
0x0261008c1500160301004610000042410423e3dfe2477a63232b6e4fccf08158a5924191052d1a251f00c953ebbc3523599aa6f86a24ce4193484477c0090530017619efcfc52af399d120d9b74d1be5821403010001011603010030d112d500999066dba189d981474584fc8bfa41a8840b2470a0ae3ce511b8f008c0cb43fe1b296f26781f3cde714b03f9
State = 0x50d301f254b214e49f3c072d4998f54e
Message-Authenticator = 0x825ea105175bc59e94ff872a81b99d10
(5) # Executing section authorize from file /etc/raddb/sites-enabled/default
(5)   authorize {
(5)   filter_username filter_username {
(5)     if (User-Name != "%{tolower:%{User-Name}}")
(5) EXPAND %{tolower:%{User-Name}}
(5)    --> testuser
(5)     if (User-Name != "%{tolower:%{User-Name}}")  -> FALSE
(5)     if (User-Name =~ / /)
(5)     if (User-Name =~ / /)  -> FALSE
(5)     if (User-Name =~ /@.*@/ )
(5)     if (User-Name =~ /@.*@/ )  -> FALSE
(5)     if (User-Name =~ /\\.\\./ )
(5)     if (User-Name =~ /\\.\\./ )  -> FALSE
(5)     if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))
(5)     if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))   -> FALSE
(5)     if (User-Name =~ /\\.$/)
(5)     if (User-Name =~ /\\.$/)   -> FALSE
(5)     if (User-Name =~ /@\\./)
(5)     if (User-Name =~ /@\\./)   -> FALSE
(5)   } # filter_username filter_username = notfound
(5)   [chap] = noop
(5)   [mschap] = noop
(5)   [digest] = noop
(5) suffix : No '@' in User-Name = "testuser", looking up realm NULL
(5) suffix : No such realm "NULL"
(5)   [suffix] = noop
(5) eap : EAP packet type response id 97 length 140
(5) eap : Continuing tunnel setup.
(5)   [eap] = ok
(5)  } #  authorize = ok
(5) Found Auth-Type = EAP
(5) # Executing group from file /etc/raddb/sites-enabled/default
(5)   authenticate {
(5) eap : Expiring EAP session with state 0x50d301f254b214e4
(5) eap : Finished EAP session with state 0x50d301f254b214e4
(5) eap : Previous EAP request found for state 0x50d301f254b214e4, released
from the list
(5) eap : Peer sent TTLS (21)
(5) eap : EAP TTLS (21)
(5) eap : Calling eap_ttls to process EAP data
(5) eap_ttls : Authenticate
(5) eap_ttls : processing EAP-TLS
(5) eap_ttls : eaptls_verify returned 7
(5) eap_ttls : Done initial handshake
(5) eap_ttls : <<< TLS 1.0 Handshake [length 0046], ClientKeyExchange
(5) eap_ttls :     TLS_accept: SSLv3 read client key exchange A
(5) eap_ttls : <<< TLS 1.0 ChangeCipherSpec [length 0001]
(5) eap_ttls : <<< TLS 1.0 Handshake [length 0010], Finished
(5) eap_ttls :     TLS_accept: SSLv3 read finished A
(5) eap_ttls : >>> TLS 1.0 ChangeCipherSpec [length 0001]
(5) eap_ttls :     TLS_accept: SSLv3 write change cipher spec A
(5) eap_ttls : >>> TLS 1.0 Handshake [length 0010], Finished
(5) eap_ttls :     TLS_accept: SSLv3 write finished A
(5) eap_ttls :     TLS_accept: SSLv3 flush data
  SSL: adding session
9016094a0dd1b7a76e0e05e547fa1af2e5d1de4a0360ef30daaa052a58d60a2f to cache
(5) eap_ttls :     (other): SSL negotiation finished successfully
SSL Connection Established
(5) eap_ttls : eaptls_process returned 13
(5) eap : New EAP session, adding 'State' attribute to reply
0x50d301f255b114e4
(5)   [eap] = handled
(5)  } #  authenticate = handled
Sending Access-Challenge Id 74 from 127.0.0.1:1812 to 127.0.0.1:35433
EAP-Message =
0x0162004515800000003b14030100010116030100302d049a98a8f080fea5ed9220f940a8ee70324e43ed9e93d80f6decc9c0e32c1ac82222b1b19e56f79eeb753cdc90513f
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x50d301f255b114e49f3c072d4998f54e
(5) Finished request
Waking up in 0.3 seconds.
Received Access-Request Id 75 from 127.0.0.1:35433 to 127.0.0.1:1812 length
300
User-Name = 'testuser'
NAS-IP-Address = 127.0.0.1
Called-Station-Id = '04-F0-21-17-94-44:ac-vap-ch149'
NAS-Port-Type = Wireless-802.11
NAS-Port = 1
Calling-Station-Id = '04-F0-21-E7-56-41'
Connect-Info = 'CONNECT 54Mbps 802.11a'
Acct-Session-Id = '55DB92D7-00000007'
X-Ascend-Home-Agent-UDP-Port = 1027076
X-Ascend-Multilink-ID = 1027074
X-Ascend-Num-In-Multilink = 1027073
Framed-MTU = 1400
EAP-Message =
0x02620060150017030100207ea8b262a94e87b5234baae2960c2d8facdc610d567f3bab979a0f3c8a7077121703010030a7e47e5b30b3a97a92fba6aacfe6533fee5f3dc6b8fe386160c71b022a3fb6184edb679f240fb32ee8e6580fb82d71da
State = 0x50d301f255b114e49f3c072d4998f54e
Message-Authenticator = 0x7113dafe2b68a99d6e9d20b902c5688e
(6) # Executing section authorize from file /etc/raddb/sites-enabled/default
(6)   authorize {
(6)   filter_username filter_username {
(6)     if (User-Name != "%{tolower:%{User-Name}}")
(6) EXPAND %{tolower:%{User-Name}}
(6)    --> testuser
(6)     if (User-Name != "%{tolower:%{User-Name}}")  -> FALSE
(6)     if (User-Name =~ / /)
(6)     if (User-Name =~ / /)  -> FALSE
(6)     if (User-Name =~ /@.*@/ )
(6)     if (User-Name =~ /@.*@/ )  -> FALSE
(6)     if (User-Name =~ /\\.\\./ )
(6)     if (User-Name =~ /\\.\\./ )  -> FALSE
(6)     if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))
(6)     if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))   -> FALSE
(6)     if (User-Name =~ /\\.$/)
(6)     if (User-Name =~ /\\.$/)   -> FALSE
(6)     if (User-Name =~ /@\\./)
(6)     if (User-Name =~ /@\\./)   -> FALSE
(6)   } # filter_username filter_username = notfound
(6)   [chap] = noop
(6)   [mschap] = noop
(6)   [digest] = noop
(6) suffix : No '@' in User-Name = "testuser", looking up realm NULL
(6) suffix : No such realm "NULL"
(6)   [suffix] = noop
(6) eap : EAP packet type response id 98 length 96
(6) eap : Continuing tunnel setup.
(6)   [eap] = ok
(6)  } #  authorize = ok
(6) Found Auth-Type = EAP
(6) # Executing group from file /etc/raddb/sites-enabled/default
(6)   authenticate {
(6) eap : Expiring EAP session with state 0x50d301f255b114e4
(6) eap : Finished EAP session with state 0x50d301f255b114e4
(6) eap : Previous EAP request found for state 0x50d301f255b114e4, released
from the list
(6) eap : Peer sent TTLS (21)
(6) eap : EAP TTLS (21)
(6) eap : Calling eap_ttls to process EAP data
(6) eap_ttls : Authenticate
(6) eap_ttls : processing EAP-TLS
(6) eap_ttls : eaptls_verify returned 7
(6) eap_ttls : Done initial handshake
(6) eap_ttls : eaptls_process returned 7
(6) eap_ttls : Session established.  Proceeding to decode tunneled
attributes.
(6) eap_ttls : Got tunneled request
EAP-Message = 0x0200000d017465737475736572
(6) eap_ttls : Got tunneled identity of testuser
(6) eap_ttls : Setting default EAP type for tunneled EAP session.
(6) eap_ttls : Sending tunneled request
EAP-Message = 0x0200000d017465737475736572
User-Name = 'testuser'
server inner-tunnel {
(6) # Executing section authorize from file
/etc/raddb/sites-enabled/inner-tunnel
(6)   authorize {
(6)   [chap] = noop
(6)   [mschap] = noop
(6) suffix : No '@' in User-Name = "testuser", looking up realm NULL
(6) suffix : No such realm "NULL"
(6)   [suffix] = noop
(6)   update control {
(6) Proxy-To-Realm := 'LOCAL'
(6)   } # update control = noop
(6) eap : EAP packet type response id 0 length 13
(6) eap : EAP-Identity reply, returning 'ok' so we can short-circuit the
rest of authorize
(6)   [eap] = ok
(6)  } #  authorize = ok
(6) Found Auth-Type = EAP
(6) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel
(6)   authenticate {
(6) eap : Peer sent Identity (1)
(6) eap : Calling eap_md5 to process EAP data
(6) eap_md5 : Issuing MD5 Challenge
(6) eap : New EAP session, adding 'State' attribute to reply
0xc301a575c300a1f9
(6)   [eap] = handled
(6)  } #  authenticate = handled
} # server inner-tunnel
(6) eap_ttls : Got tunneled reply code 11
EAP-Message = 0x0101001604105792cb508a0c0a2fbb7a527d155230a6
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xc301a575c300a1f9b738300baef24065
(6) eap_ttls : Got tunneled Access-Challenge
(6) eap : New EAP session, adding 'State' attribute to reply
0x50d301f256b014e4
(6)   [eap] = handled
(6)  } #  authenticate = handled
Sending Access-Challenge Id 75 from 127.0.0.1:1812 to 127.0.0.1:35433
EAP-Message =
0x0163004f1580000000451703010040e1174a3efa0dd5a00aa5494cd878f1949acb9e63883254544b7072953d48be56d929b37cfc30840b827e99b545e44151eb9fd27e871170152c16068221086f90
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x50d301f256b014e49f3c072d4998f54e
(6) Finished request
Waking up in 0.3 seconds.
Received Access-Request Id 76 from 127.0.0.1:35433 to 127.0.0.1:1812 length
316
User-Name = 'testuser'
NAS-IP-Address = 127.0.0.1
Called-Station-Id = '04-F0-21-17-94-44:ac-vap-ch149'
NAS-Port-Type = Wireless-802.11
NAS-Port = 1
Calling-Station-Id = '04-F0-21-E7-56-41'
Connect-Info = 'CONNECT 54Mbps 802.11a'
Acct-Session-Id = '55DB92D7-00000007'
X-Ascend-Home-Agent-UDP-Port = 1027076
X-Ascend-Multilink-ID = 1027074
X-Ascend-Num-In-Multilink = 1027073
Framed-MTU = 1400
EAP-Message =
0x0263007015001703010020e06ee46476e095c41e67b99cebf1e4247fec25b3ecd26c9c3861e69cd3aeb51317030100409e6b93afcaa0cc118fdc9f334fb4330860da522423d57eceb4e6c844ec9ef16a7e4cff2b6493fbc3ee8e18bed186c1c1353ef86b9909e09a74b3a8c7191306bd
State = 0x50d301f256b014e49f3c072d4998f54e
Message-Authenticator = 0xfa22560254781849b5ec116212e464a4
(7) # Executing section authorize from file /etc/raddb/sites-enabled/default
(7)   authorize {
(7)   filter_username filter_username {
(7)     if (User-Name != "%{tolower:%{User-Name}}")
(7) EXPAND %{tolower:%{User-Name}}
(7)    --> testuser
(7)     if (User-Name != "%{tolower:%{User-Name}}")  -> FALSE
(7)     if (User-Name =~ / /)
(7)     if (User-Name =~ / /)  -> FALSE
(7)     if (User-Name =~ /@.*@/ )
(7)     if (User-Name =~ /@.*@/ )  -> FALSE
(7)     if (User-Name =~ /\\.\\./ )
(7)     if (User-Name =~ /\\.\\./ )  -> FALSE
(7)     if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))
(7)     if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))   -> FALSE
(7)     if (User-Name =~ /\\.$/)
(7)     if (User-Name =~ /\\.$/)   -> FALSE
(7)     if (User-Name =~ /@\\./)
(7)     if (User-Name =~ /@\\./)   -> FALSE
(7)   } # filter_username filter_username = notfound
(7)   [chap] = noop
(7)   [mschap] = noop
(7)   [digest] = noop
(7) suffix : No '@' in User-Name = "testuser", looking up realm NULL
(7) suffix : No such realm "NULL"
(7)   [suffix] = noop
(7) eap : EAP packet type response id 99 length 112
(7) eap : Continuing tunnel setup.
(7)   [eap] = ok
(7)  } #  authorize = ok
(7) Found Auth-Type = EAP
(7) # Executing group from file /etc/raddb/sites-enabled/default
(7)   authenticate {
(7) eap : Expiring EAP session with state 0xc301a575c300a1f9
(7) eap : Finished EAP session with state 0x50d301f256b014e4
(7) eap : Previous EAP request found for state 0x50d301f256b014e4, released
from the list
(7) eap : Peer sent TTLS (21)
(7) eap : EAP TTLS (21)
(7) eap : Calling eap_ttls to process EAP data
(7) eap_ttls : Authenticate
(7) eap_ttls : processing EAP-TLS
(7) eap_ttls : eaptls_verify returned 7
(7) eap_ttls : Done initial handshake
(7) eap_ttls : eaptls_process returned 7
(7) eap_ttls : Session established.  Proceeding to decode tunneled
attributes.
(7) eap_ttls : Got tunneled request
EAP-Message = 0x020100160410ba01eba69294cd1d8c7a8e6d35630693
(7) eap_ttls : Sending tunneled request
EAP-Message = 0x020100160410ba01eba69294cd1d8c7a8e6d35630693
User-Name = 'testuser'
State = 0xc301a575c300a1f9b738300baef24065
server inner-tunnel {
(7) # Executing section authorize from file
/etc/raddb/sites-enabled/inner-tunnel
(7)   authorize {
(7)   [chap] = noop
(7)   [mschap] = noop
(7) suffix : No '@' in User-Name = "testuser", looking up realm NULL
(7) suffix : No such realm "NULL"
(7)   [suffix] = noop
(7)   update control {
(7) Proxy-To-Realm := 'LOCAL'
(7)   } # update control = noop
(7) eap : EAP packet type response id 1 length 22
(7) eap : No EAP Start, assuming it's an on-going EAP conversation
(7)   [eap] = updated
(7) files : users: Matched entry testuser at line 6
(7)   [files] = ok
(7)   [expiration] = noop
(7)   [logintime] = noop
(7) WARNING: pap : Auth-Type already set.  Not setting to PAP
(7)   [pap] = noop
(7)  } #  authorize = updated
(7) Found Auth-Type = EAP
(7) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel
(7)   authenticate {
(7) eap : Expiring EAP session with state 0xc301a575c300a1f9
(7) eap : Finished EAP session with state 0xc301a575c300a1f9
(7) eap : Previous EAP request found for state 0xc301a575c300a1f9, released
from the list
(7) eap : Peer sent MD5 (4)
(7) eap : EAP MD5 (4)
(7) eap : Calling eap_md5 to process EAP data
(7) eap : Freeing handler
(7)   [eap] = ok
(7)  } #  authenticate = ok
(7) # Executing section post-auth from file
/etc/raddb/sites-enabled/inner-tunnel
(7)  (null) post-auth { ... } # empty sub-section is ignored
} # server inner-tunnel
(7) eap_ttls : Got tunneled reply code 2
EAP-Message = 0x03010004
Message-Authenticator = 0x00000000000000000000000000000000
User-Name = 'testuser'
(7) eap_ttls : Got tunneled Access-Accept
(7) WARNING: eap_ttls : No information to cache: session caching will be
disabled for session
9016094a0dd1b7a76e0e05e547fa1af2e5d1de4a0360ef30daaa052a58d60a2f
  SSL: Removing session
9016094a0dd1b7a76e0e05e547fa1af2e5d1de4a0360ef30daaa052a58d60a2f from the
cache
(7) eap : Freeing handler
rlm_eap_ttls: Freeing handler for user testuser
(7)   [eap] = ok
(7)  } #  authenticate = ok
(7) # Executing section post-auth from file /etc/raddb/sites-enabled/default
(7)   post-auth {
(7)   [exec] = noop
(7)   remove_reply_message_if_eap remove_reply_message_if_eap {
(7)     if (reply:EAP-Message && reply:Reply-Message)
(7)     if (reply:EAP-Message && reply:Reply-Message)  -> FALSE
(7)    else else {
(7)     [noop] = noop
(7)    } # else else = noop
(7)   } # remove_reply_message_if_eap remove_reply_message_if_eap = noop
(7)  } #  post-auth = noop
Sending Access-Accept Id 76 from 127.0.0.1:1812 to 127.0.0.1:35433
MS-MPPE-Recv-Key =
0x4a4d9dfb87504956f93d37026a663aef7e83282c328bfcf16d830d6410f47dd9
MS-MPPE-Send-Key =
0x652c8825bf925a95a7c7776c3bc73dd67f8387c570977550015dea4a6d6c23ad
EAP-Message = 0x03630004
Message-Authenticator = 0x00000000000000000000000000000000
User-Name = 'testuser'
(7) Finished request
Waking up in 0.3 seconds.
Waking up in 4.6 seconds.

help with configs for eap-md5

Isaac Konikoff