Hey guys, I want to implement the Cisco WLC 5508 to FreeRadius server, basically the FreeRadius Server is integrate with LDAP. The connection will look like diagram below, WLC 5508 --------> FreeRadius (Integrated LDAP) The connection between WLC 5508 to FreeRadius is using EAP. I got an errors while doing the test, the errors are below, +- entering group authorize {...} [ldap] performing user authorization for evening [ldap] expand: %{Stripped-User-Name} -> [ldap] ... expanding second conditional [ldap] expand: %{User-Name} -> evening [ldap] expand: (uid=%{%{Stripped-User-Name}:-%{User-Name}}) -> (uid=evening) [ldap] expand: dc=fng,dc=fnf,dc=local -> dc=fng,dc=fnf,dc=local [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] performing search in dc=fng,dc=fnf,dc=local, with filter (uid=evening) [ldap] looking for check items in directory... [ldap] looking for reply items in directory... WARNING: No "known good" password was found in LDAP. Are you sure that the user is configured correctly? [ldap] user evening authorized to use remote access [ldap] ldap_release_conn: Release Id: 0 ++[ldap] returns ok [eap] EAP packet type response id 1 length 12 [eap] No EAP Start, assuming it's an on-going EAP conversation I also getting this Accept-Challenge and Accept-Request, see the errors below, ++[eap] returns handled Sending Access-Challenge of id 153 to 10.201.65.241 port 32769 EAP-Message = 0x010200061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x7acc1b267ace021e658dc33386efc594 Finished request 5. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.201.65.241 port 32769, id=154, length=347 User-Name = "evening" Calling-Station-Id = "00-23-12-11-6f-c5" Called-Station-Id = "ec-c8-82-ab-03-10:FNTest" NAS-Port = 1 Cisco-AVPair = "audit-session-id=0ac941f10001e76252a7e42a" NAS-IP-Address = 10.201.65.241 NAS-Identifier = "F&N_COM_WLC5508_2" Airespace-Wlan-Id = 3 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "10" EAP-Message = 0x0202006d198000000063160301005e0100005a030152a7e33ffc9ad76b67fac2d1ba43bfca99c29126ee731235c001ea8bfdf4bd32000018002f00350005000ac013c014c009c00a003200380013000401000019ff01000100000a0006000400170018000b0002010000230000 State = 0x7acc1b267ace021e658dc33386efc594 Message-Authenticator = 0x59835b7747b9a7654512b48586a132a5 What are the possibility that the authentication failed between Cisco WLC to FreeRadius?? Hope you guys can assist me on this particular issues. Really appreciate it for your help. Thanks & Regards, Weng Chee DISCLAIMER: This email and any files transmitted with it are confidential and are intended solely for the use of the individual or entity to which they are addressed. If you are not the intended recipient or the person responsible, be advised that you have received this e-mail in error and that any use, dissemination, forwarding, printing or copying of this e-mail is strictly prohibited. If you have received this e-mail in error, please immediately notify us. Thank you.