OK, getting somewhere, but still won't let me connect. I can't see in the debug output why it fails. I'm trying to authenticate against AD, using PEAP-MSCHAPv2 I have checked ntlm_auth is working by ntlm_auth --request-nt-key --domain=MYDOMAIN --username=testuser --password=password and I get (NT_STATUS_OK) my /modules/ntlm_auth looks like this:- exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" } and modules/mschap looks like this ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key --username=%{mschap:User-Name:-None} --domain=%{%{mschap:NT-Domain}:-NUFFIELDCOLLEGE} --challenge=%{mschap:Challenge:-00} --nt-response=%{mschap:NT-Response$ } In the debug output I can see this - should authentication realm = LOCAL as below? [suffix] Looking up realm "mydomain.ox.ac.uk" for User-Name = "testuser@mydomain.ox.ac.uk" [suffix] Found realm "mydomain.ox.ac.uk" [suffix] Adding Stripped-User-Name = "testuser" [suffix] Adding Realm = "mydomain.ox.ac.uk" [suffix] Authentication realm is LOCAL. When I paste the debug into the checker it highlights this:- [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. But not sure I need to worry about that as I'm not doing PAP Can't see anything else in there indicating a problem, but when I try to connect a device (my iPhone) it just returns a 'cannot connect to' message What am I missing? No doubt something obvious.... Debug output ------------ FreeRADIUS Version 2.1.7, for host i686-redhat-linux-gnu, built on Mar 31 2010 at 00:25:31 Copyright (C) 1999-2009 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including configuration file /etc/raddb/clients.conf including files in directory /etc/raddb/modules/ including configuration file /etc/raddb/modules/ntlm_auth including configuration file /etc/raddb/modules/attr_rewrite including configuration file /etc/raddb/modules/detail.log including configuration file /etc/raddb/modules/digest including configuration file /etc/raddb/modules/detail.example.com including configuration file /etc/raddb/modules/wimax including configuration file /etc/raddb/modules/acct_unique including configuration file /etc/raddb/modules/mschap including configuration file /etc/raddb/modules/logintime including configuration file /etc/raddb/modules/realm including configuration file /etc/raddb/modules/linelog including configuration file /etc/raddb/modules/mac2vlan including configuration file /etc/raddb/modules/radutmp including configuration file /etc/raddb/modules/etc_group including configuration file /etc/raddb/modules/perl including configuration file /etc/raddb/modules/pam including configuration file /etc/raddb/modules/policy including configuration file /etc/raddb/modules/exec including configuration file /etc/raddb/modules/chap including configuration file /etc/raddb/modules/preprocess including configuration file /etc/raddb/modules/pap including configuration file /etc/raddb/modules/expiration including configuration file /etc/raddb/modules/counter including configuration file /etc/raddb/modules/detail including configuration file /etc/raddb/modules/expr including configuration file /etc/raddb/modules/sqlcounter_expire_on_login including configuration file /etc/raddb/modules/attr_filter including configuration file /etc/raddb/modules/checkval including configuration file /etc/raddb/modules/always including configuration file /etc/raddb/modules/inner-eap including configuration file /etc/raddb/modules/cui including configuration file /etc/raddb/modules/files including configuration file /etc/raddb/modules/mac2ip including configuration file /etc/raddb/modules/passwd including configuration file /etc/raddb/modules/sql_log including configuration file /etc/raddb/modules/unix including configuration file /etc/raddb/modules/smbpasswd including configuration file /etc/raddb/modules/otp including configuration file /etc/raddb/modules/sradutmp including configuration file /etc/raddb/modules/smsotp including configuration file /etc/raddb/modules/ippool including configuration file /etc/raddb/modules/echo including configuration file /etc/raddb/eap.conf including configuration file /etc/raddb/policy.conf including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/inner-tunnel including configuration file /etc/raddb/sites-enabled/control-socket including configuration file /etc/raddb/sites-enabled/default group = radiusd user = radiusd including dictionary file /etc/raddb/dictionary main { prefix = "/usr" localstatedir = "/var" logdir = "/var/log/radius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 allow_core_dumps = no pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no } security { max_attributes = 200 reject_delay = 1 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = "testing123" response_window = 20 max_outstanding = 65536 require_message_authenticator = no zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 irt = 2 mrt = 16 mrc = 5 mrd = 30 } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } realm mydomain.ox.ac.uk { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "testing123" nastype = "other" } client 192.168.30.1 { require_message_authenticator = no secret = "6_5EsC=Vv&y$pK27" shortname = "192.168.30.1" nastype = "other" } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating expr Module: Linked to module rlm_expiration Module: Instantiating expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server inner-tunnel { modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating chap Module: Linked to module rlm_mschap Module: Instantiating mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = no ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key --username=%{mschap:User-Name:-None} --domain=%{%{mschap:NT-Domain}:-MYDOMAIN} --challenge=%{mschap:Challenge:-00} " } Module: Instantiating ntlm_auth exec ntlm_auth { wait = yes program = "/usr/bin/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_unix Module: Instantiating unix unix { radwtmp = "/var/log/radius/radwtmp" } Module: Linked to module rlm_eap Module: Instantiating eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 2048 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 pem_file_type = yes private_key_file = "/etc/raddb/certs/server.pem" certificate_file = "/etc/raddb/certs/server.pem" CA_file = "/etc/raddb/certs/ca.pem" private_key_password = "whatever" dh_file = "/etc/raddb/certs/dh" random_file = "/etc/raddb/certs/random" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" make_cert_command = "/etc/raddb/certs/bootstrap" cache { enable = no lifetime = 24 max_entries = 255 } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_realm Module: Instantiating suffix realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating files files { usersfile = "/etc/raddb/users" acctusersfile = "/etc/raddb/acct_users" preproxy_usersfile = "/etc/raddb/preproxy_users" compat = "no" } Module: Checking session {...} for more modules to load Module: Linked to module rlm_radutmp Module: Instantiating radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Linked to module rlm_attr_filter Module: Instantiating attr_filter.access_reject attr_filter attr_filter.access_reject { attrsfile = "/etc/raddb/attrs.access_reject" key = "%{User-Name}" } } # modules } # server server { modules { Module: Checking authenticate {...} for more modules to load Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating preprocess preprocess { huntgroups = "/etc/raddb/huntgroups" hints = "/etc/raddb/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating detail detail { detailfile = "/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Instantiating attr_filter.accounting_response attr_filter attr_filter.accounting_response { attrsfile = "/etc/raddb/attrs.accounting_response" key = "%{User-Name}" } Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } # modules } # server radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 } listen { type = "acct" ipaddr = * port = 0 } listen { type = "control" listen { socket = "/var/run/radiusd/radiusd.sock" } } Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on command file /var/run/radiusd/radiusd.sock Listening on proxy address * port 1814 Ready to process requests. rad_recv: Access-Request packet from host 192.168.30.1 port 1160, id=0, length=226 Message-Authenticator = 0x23034f1c4e3f45f152d1c4fb279f8f73 Service-Type = Framed-User User-Name = "testuser@mydomain.ox.ac.uk" Framed-MTU = 1488 Called-Station-Id = "00-24-73-54-22-C2:Nuffield-WLAN" Calling-Station-Id = "40-D3-2D-7D-BA-D3" NAS-Identifier = "Wireless AP - I6" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 54Mbps 802.11g" EAP-Message = 0x0200001901686f6c6d6573406e7566662e6f782e61632e756b NAS-IP-Address = 192.168.30.1 NAS-Port = 1 NAS-Port-Id = "STA port # 1" +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] Looking up realm "mydomain.ox.ac.uk" for User-Name = "testuser@mydomain.ox.ac.uk" [suffix] Found realm "mydomain.ox.ac.uk" [suffix] Adding Stripped-User-Name = "testuser" [suffix] Adding Realm = "mydomain.ox.ac.uk" [suffix] Authentication realm is LOCAL. ++[suffix] returns ok [eap] EAP packet type response id 0 length 25 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[unix] returns notfound ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] EAP Identity [eap] processing type md5 rlm_eap_md5: Issuing Challenge ++[eap] returns handled Sending Access-Challenge of id 0 to 192.168.30.1 port 1160 EAP-Message = 0x0101001604100d3dfd867b801639e3c581bfcdcfaf13 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x6937ee236936ea7140d04af0873965b7 Finished request 0. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.30.1 port 1160, id=1, length=225 Message-Authenticator = 0x6cca649f78174a259d2c601dd67257ed Service-Type = Framed-User User-Name = "testuser@mydomain.ox.ac.uk" Framed-MTU = 1488 State = 0x6937ee236936ea7140d04af0873965b7 Called-Station-Id = "00-24-73-54-22-C2:Nuffield-WLAN" Calling-Station-Id = "40-D3-2D-7D-BA-D3" NAS-Identifier = "Wireless AP - I6" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 54Mbps 802.11g" EAP-Message = 0x020100060319 NAS-IP-Address = 192.168.30.1 NAS-Port = 1 NAS-Port-Id = "STA port # 1" +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] Looking up realm "mydomain.ox.ac.uk" for User-Name = "testuser@mydomain.ox.ac.uk" [suffix] Found realm "mydomain.ox.ac.uk" [suffix] Adding Stripped-User-Name = "testuser" [suffix] Adding Realm = "mydomain.ox.ac.uk" [suffix] Authentication realm is LOCAL. ++[suffix] returns ok [eap] EAP packet type response id 1 length 6 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[unix] returns notfound ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP NAK [eap] EAP-NAK asked for EAP-Type/peap [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 1 to 192.168.30.1 port 1160 EAP-Message = 0x010200061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x6937ee236835f77140d04af0873965b7 Finished request 1. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.30.1 port 1160, id=2, length=355 Message-Authenticator = 0x5736800352fb2d51bdf61a2734312f8a Service-Type = Framed-User User-Name = "testuser@mydomain.ox.ac.uk" Framed-MTU = 1488 State = 0x6937ee236835f77140d04af0873965b7 Called-Station-Id = "00-24-73-54-22-C2:Nuffield-WLAN" Calling-Station-Id = "40-D3-2D-7D-BA-D3" NAS-Identifier = "Wireless AP - I6" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 54Mbps 802.11g" EAP-Message = 0x0202008819800000007e16030100790100007503014cb45b46608d363ac5c8d26e33dd43898b655a06cfdf1574be1a913ac88c202300003ac00ac009c007c008c013c014c011c012c004c005c002c003c00ec00fc00cc00d002f000500040035000a0009000300080033003900160015001401000012000a00080006001700180019000b00020100 NAS-IP-Address = 192.168.30.1 NAS-Port = 1 NAS-Port-Id = "STA port # 1" +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] Looking up realm "mydomain.ox.ac.uk" for User-Name = "testuser@mydomain.ox.ac.uk" [suffix] Found realm "mydomain.ox.ac.uk" [suffix] Adding Stripped-User-Name = "testuser" [suffix] Adding Realm = "mydomain.ox.ac.uk" [suffix] Authentication realm is LOCAL. ++[suffix] returns ok [eap] EAP packet type response id 2 length 136 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 126 [peap] Length Included [peap] eaptls_verify returned 11 [peap] (other): before/accept initialization [peap] TLS_accept: before/accept initialization [peap] <<< TLS 1.0 Handshake [length 0079], ClientHello [peap] TLS_accept: SSLv3 read client hello A [peap] >>> TLS 1.0 Handshake [length 002a], ServerHello [peap] TLS_accept: SSLv3 write server hello A [peap] >>> TLS 1.0 Handshake [length 085e], Certificate [peap] TLS_accept: SSLv3 write certificate A [peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone [peap] TLS_accept: SSLv3 write server done A [peap] TLS_accept: SSLv3 flush data [peap] TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 2 to 192.168.30.1 port 1160 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0xa73082038fa0030201020209 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x6937ee236b34f77140d04af0873965b7 Finished request 2. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.30.1 port 1160, id=3, length=225 Message-Authenticator = 0x2576586942c102d3255acbf7f9e7551e Service-Type = Framed-User User-Name = "testuser@mydomain.ox.ac.uk" Framed-MTU = 1488 State = 0x6937ee236b34f77140d04af0873965b7 Called-Station-Id = "00-24-73-54-22-C2:Nuffield-WLAN" Calling-Station-Id = "40-D3-2D-7D-BA-D3" NAS-Identifier = "Wireless AP - I6" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 54Mbps 802.11g" EAP-Message = 0x020300061900 NAS-IP-Address = 192.168.30.1 NAS-Port = 1 NAS-Port-Id = "STA port # 1" +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] Looking up realm "mydomain.ox.ac.uk" for User-Name = "testuser@mydomain.ox.ac.uk" [suffix] Found realm "mydomain.ox.ac.uk" [suffix] Adding Stripped-User-Name = "testuser" [suffix] Adding Realm = "mydomain.ox.ac.uk" [suffix] Authentication realm is LOCAL. ++[suffix] returns ok [eap] EAP packet type response id 3 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 3 to 192.168.30.1 port 1160 EAP-Message = 0x010403fc194000a47119ce17378229300d06092a864886f70d0101050500308193310b3009060355040613024652310f300d060355040813065261646975733112301006035504071309536f6d65776865726531153013060355040a130c4578616d706c6520496e632e3120301e06092a864886f70d010901161161646d696e406578616d706c652e636f6d312630240603550403131d4578616d706c6520436572746966696361746520417574686f72697479301e170d3130313030383038303330305a170d3131313030383038303330305a308193310b3009060355040613024652310f300d060355040813065261646975733112301006035504 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x1829b09aaa230ef9 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x6937ee236a33f77140d04af0873965b7 Finished request 3. Going to the next request Waking up in 4.8 seconds. rad_recv: Access-Request packet from host 192.168.30.1 port 1160, id=4, length=225 Message-Authenticator = 0x6f2d1194ed5104fbddac935348770d23 Service-Type = Framed-User User-Name = "testuser@mydomain.ox.ac.uk" Framed-MTU = 1488 State = 0x6937ee236a33f77140d04af0873965b7 Called-Station-Id = "00-24-73-54-22-C2:Nuffield-WLAN" Calling-Station-Id = "40-D3-2D-7D-BA-D3" NAS-Identifier = "Wireless AP - I6" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 54Mbps 802.11g" EAP-Message = 0x020400061900 NAS-IP-Address = 192.168.30.1 NAS-Port = 1 NAS-Port-Id = "STA port # 1" +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] Looking up realm "mydomain.ox.ac.uk" for User-Name = "testuser@mydomain.ox.ac.uk" [suffix] Found realm "mydomain.ox.ac.uk" [suffix] Adding Stripped-User-Name = "testuser" [suffix] Adding Realm = "mydomain.ox.ac.uk" [suffix] Authentication realm is LOCAL. ++[suffix] returns ok [eap] EAP packet type response id 4 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 4 to 192.168.30.1 port 1160 EAP-Message = 0x010500b519003302ce0e0fc291a6d96b7d48ee73196ba6bd4dc1f482f212668469e57b39e7a43b8911798e16f4d667a4133677ef3b262a0cefa7bb3a2f93fc41a553e1ff1d42df892e8febb86910e1836ecf18128eb24e23608b9e4e7ffb71cfd48da75a5b417362db9b375e21f7384816cdd5779000d167455a927c243356a8c2485489283a74d948616dfe29804da6c776fbef1237bfd67629668ac63328df37a16e53695de443b288c87e16030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x6937ee236d32f77140d04af0873965b7 Finished request 4. Going to the next request Waking up in 4.8 seconds. rad_recv: Access-Request packet from host 192.168.30.1 port 1160, id=5, length=557 Message-Authenticator = 0x3646336058803ed4629d9489a5a2024e Service-Type = Framed-User User-Name = "testuser@mydomain.ox.ac.uk" Framed-MTU = 1488 State = 0x6937ee236d32f77140d04af0873965b7 Called-Station-Id = "00-24-73-54-22-C2:Nuffield-WLAN" Calling-Station-Id = "40-D3-2D-7D-BA-D3" NAS-Identifier = "Wireless AP - I6" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 54Mbps 802.11g" EAP-Message = 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 EAP-Message = 0xdd352cb41686de425e8514b1a9b629f01e4117775e2a754f14030100010116030100307cc4d403526e0aa85b56c969bea377bd4c2c1518f91751664bd178ced86e29fbb1109030b638d768e118d710e5e29ba4 NAS-IP-Address = 192.168.30.1 NAS-Port = 1 NAS-Port-Id = "STA port # 1" +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] Looking up realm "mydomain.ox.ac.uk" for User-Name = "testuser@mydomain.ox.ac.uk" [suffix] Found realm "mydomain.ox.ac.uk" [suffix] Adding Stripped-User-Name = "testuser" [suffix] Adding Realm = "mydomain.ox.ac.uk" [suffix] Authentication realm is LOCAL. ++[suffix] returns ok [eap] EAP packet type response id 5 length 253 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 326 [peap] Length Included [peap] eaptls_verify returned 11 [peap] <<< TLS 1.0 Handshake [length 0106], ClientKeyExchange [peap] TLS_accept: SSLv3 read client key exchange A [peap] <<< TLS 1.0 ChangeCipherSpec [length 0001] [peap] <<< TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: SSLv3 read finished A [peap] >>> TLS 1.0 ChangeCipherSpec [length 0001] [peap] TLS_accept: SSLv3 write change cipher spec A [peap] >>> TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: SSLv3 write finished A [peap] TLS_accept: SSLv3 flush data [peap] (other): SSL negotiation finished successfully SSL Connection Established [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 5 to 192.168.30.1 port 1160 EAP-Message = 0x01060041190014030100010116030100300ce01663c1ce145d63c96447d3d07cf68e95c24295d97affe9bc36864795bdb88e70c74afb4355ff222162b72c963dcd Message-Authenticator = 0x00000000000000000000000000000000 State = 0x6937ee236c31f77140d04af0873965b7 Finished request 5. Going to the next request Waking up in 4.7 seconds. Cleaning up request 0 ID 0 with timestamp +5 Cleaning up request 1 ID 1 with timestamp +5 Cleaning up request 2 ID 2 with timestamp +5 Cleaning up request 3 ID 3 with timestamp +5 Cleaning up request 4 ID 4 with timestamp +5 Cleaning up request 5 ID 5 with timestamp +5 Ready to process requests. rad_recv: Access-Request packet from host 192.168.30.1 port 1162, id=0, length=226 Message-Authenticator = 0x14baebdd1574b1ac2231ae94c3cf4706 Service-Type = Framed-User User-Name = "testuser@mydomain.ox.ac.uk" Framed-MTU = 1488 Called-Station-Id = "00-24-73-54-22-C2:Nuffield-WLAN" Calling-Station-Id = "40-D3-2D-7D-BA-D3" NAS-Identifier = "Wireless AP - I6" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 54Mbps 802.11g" EAP-Message = 0x0200001901686f6c6d6573406e7566662e6f782e61632e756b NAS-IP-Address = 192.168.30.1 NAS-Port = 1 NAS-Port-Id = "STA port # 1" +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] Looking up realm "mydomain.ox.ac.uk" for User-Name = "testuser@mydomain.ox.ac.uk" [suffix] Found realm "mydomain.ox.ac.uk" [suffix] Adding Stripped-User-Name = "testuser" [suffix] Adding Realm = "mydomain.ox.ac.uk" [suffix] Authentication realm is LOCAL. ++[suffix] returns ok [eap] EAP packet type response id 0 length 25 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[unix] returns notfound ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] EAP Identity [eap] processing type md5 rlm_eap_md5: Issuing Challenge ++[eap] returns handled Sending Access-Challenge of id 0 to 192.168.30.1 port 1162 EAP-Message = 0x0101001604102922a8dc5552088852ca5c41f1c42f06 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xbc7efc4cbc7ff83c4bf33c60bc849290 Finished request 6. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.30.1 port 1162, id=1, length=225 Message-Authenticator = 0xc2a17c9f5948eec45c5759a39cfa444c Service-Type = Framed-User User-Name = "testuser@mydomain.ox.ac.uk" Framed-MTU = 1488 State = 0xbc7efc4cbc7ff83c4bf33c60bc849290 Called-Station-Id = "00-24-73-54-22-C2:Nuffield-WLAN" Calling-Station-Id = "40-D3-2D-7D-BA-D3" NAS-Identifier = "Wireless AP - I6" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 54Mbps 802.11g" EAP-Message = 0x020100060319 NAS-IP-Address = 192.168.30.1 NAS-Port = 1 NAS-Port-Id = "STA port # 1" +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] Looking up realm "mydomain.ox.ac.uk" for User-Name = "testuser@mydomain.ox.ac.uk" [suffix] Found realm "mydomain.ox.ac.uk" [suffix] Adding Stripped-User-Name = "testuser" [suffix] Adding Realm = "mydomain.ox.ac.uk" [suffix] Authentication realm is LOCAL. ++[suffix] returns ok [eap] EAP packet type response id 1 length 6 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[unix] returns notfound ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP NAK [eap] EAP-NAK asked for EAP-Type/peap [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 1 to 192.168.30.1 port 1162 EAP-Message = 0x010200061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xbc7efc4cbd7ce53c4bf33c60bc849290 Finished request 7. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.30.1 port 1162, id=2, length=355 Message-Authenticator = 0x18edcd6024ca02642f216f90a64303fd Service-Type = Framed-User User-Name = "testuser@mydomain.ox.ac.uk" Framed-MTU = 1488 State = 0xbc7efc4cbd7ce53c4bf33c60bc849290 Called-Station-Id = "00-24-73-54-22-C2:Nuffield-WLAN" Calling-Station-Id = "40-D3-2D-7D-BA-D3" NAS-Identifier = "Wireless AP - I6" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 54Mbps 802.11g" EAP-Message = 0x0202008819800000007e16030100790100007503014cb45b53574671267b35847b4edcbfd00fcb35f11867fa6fa24c9d9642f0079e00003ac00ac009c007c008c013c014c011c012c004c005c002c003c00ec00fc00cc00d002f000500040035000a0009000300080033003900160015001401000012000a00080006001700180019000b00020100 NAS-IP-Address = 192.168.30.1 NAS-Port = 1 NAS-Port-Id = "STA port # 1" +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] Looking up realm "mydomain.ox.ac.uk" for User-Name = "testuser@mydomain.ox.ac.uk" [suffix] Found realm "mydomain.ox.ac.uk" [suffix] Adding Stripped-User-Name = "testuser" [suffix] Adding Realm = "mydomain.ox.ac.uk" [suffix] Authentication realm is LOCAL. ++[suffix] returns ok [eap] EAP packet type response id 2 length 136 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 126 [peap] Length Included [peap] eaptls_verify returned 11 [peap] (other): before/accept initialization [peap] TLS_accept: before/accept initialization [peap] <<< TLS 1.0 Handshake [length 0079], ClientHello [peap] TLS_accept: SSLv3 read client hello A [peap] >>> TLS 1.0 Handshake [length 002a], ServerHello [peap] TLS_accept: SSLv3 write server hello A [peap] >>> TLS 1.0 Handshake [length 085e], Certificate [peap] TLS_accept: SSLv3 write certificate A [peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone [peap] TLS_accept: SSLv3 write server done A [peap] TLS_accept: SSLv3 flush data [peap] TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 2 to 192.168.30.1 port 1162 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0xa73082038fa0030201020209 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xbc7efc4cbe7de53c4bf33c60bc849290 Finished request 8. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.30.1 port 1162, id=3, length=225 Message-Authenticator = 0xd4fa27a8f72667781057ca14f3ab7325 Service-Type = Framed-User User-Name = "testuser@mydomain.ox.ac.uk" Framed-MTU = 1488 State = 0xbc7efc4cbe7de53c4bf33c60bc849290 Called-Station-Id = "00-24-73-54-22-C2:Nuffield-WLAN" Calling-Station-Id = "40-D3-2D-7D-BA-D3" NAS-Identifier = "Wireless AP - I6" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 54Mbps 802.11g" EAP-Message = 0x020300061900 NAS-IP-Address = 192.168.30.1 NAS-Port = 1 NAS-Port-Id = "STA port # 1" +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] Looking up realm "mydomain.ox.ac.uk" for User-Name = "testuser@mydomain.ox.ac.uk" [suffix] Found realm "mydomain.ox.ac.uk" [suffix] Adding Stripped-User-Name = "testuser" [suffix] Adding Realm = "mydomain.ox.ac.uk" [suffix] Authentication realm is LOCAL. ++[suffix] returns ok [eap] EAP packet type response id 3 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 3 to 192.168.30.1 port 1162 EAP-Message = 0x010403fc194000a47119ce17378229300d06092a864886f70d0101050500308193310b3009060355040613024652310f300d060355040813065261646975733112301006035504071309536f6d65776865726531153013060355040a130c4578616d706c6520496e632e3120301e06092a864886f70d010901161161646d696e406578616d706c652e636f6d312630240603550403131d4578616d706c6520436572746966696361746520417574686f72697479301e170d3130313030383038303330305a170d3131313030383038303330305a308193310b3009060355040613024652310f300d060355040813065261646975733112301006035504 EAP-Message = 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 EAP-Message = 0xdf79e0fa3c90185057a35624c09b40c2f01889fef159ae567190869e1ad449c58534977edfd31d2432471a73460429821c3b32f2a6bcf17afed6c709354032dbd172ea5b69f1273b3ee5a92195999f52567d55cef4ccf64ae63999c5bbd6e1edb6e1c0c8b5b1badda1dbd8f59550824aa6bb08b3e4161a2226beff4dcff7868f413dab72bd3d294ddab63facc03becee630203010001a381fb3081f8301d0603551d0e041604140ebb1810e4029362b0d95e2dc4b7e6b8a0ffd1eb3081c80603551d230481c03081bd80140ebb1810e4029362b0d95e2dc4b7e6b8a0ffd1eba18199a48196308193310b3009060355040613024652310f300d06035504 EAP-Message = 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 EAP-Message = 0x1829b09aaa230ef9 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xbc7efc4cbf7ae53c4bf33c60bc849290 Finished request 9. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.30.1 port 1162, id=4, length=225 Message-Authenticator = 0x453af3751e3ce2f19be665f372db070d Service-Type = Framed-User User-Name = "testuser@mydomain.ox.ac.uk" Framed-MTU = 1488 State = 0xbc7efc4cbf7ae53c4bf33c60bc849290 Called-Station-Id = "00-24-73-54-22-C2:Nuffield-WLAN" Calling-Station-Id = "40-D3-2D-7D-BA-D3" NAS-Identifier = "Wireless AP - I6" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 54Mbps 802.11g" EAP-Message = 0x020400061900 NAS-IP-Address = 192.168.30.1 NAS-Port = 1 NAS-Port-Id = "STA port # 1" +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] Looking up realm "mydomain.ox.ac.uk" for User-Name = "testuser@mydomain.ox.ac.uk" [suffix] Found realm "mydomain.ox.ac.uk" [suffix] Adding Stripped-User-Name = "testuser" [suffix] Adding Realm = "mydomain.ox.ac.uk" [suffix] Authentication realm is LOCAL. ++[suffix] returns ok [eap] EAP packet type response id 4 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 4 to 192.168.30.1 port 1162 EAP-Message = 0x010500b519003302ce0e0fc291a6d96b7d48ee73196ba6bd4dc1f482f212668469e57b39e7a43b8911798e16f4d667a4133677ef3b262a0cefa7bb3a2f93fc41a553e1ff1d42df892e8febb86910e1836ecf18128eb24e23608b9e4e7ffb71cfd48da75a5b417362db9b375e21f7384816cdd5779000d167455a927c243356a8c2485489283a74d948616dfe29804da6c776fbef1237bfd67629668ac63328df37a16e53695de443b288c87e16030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xbc7efc4cb87be53c4bf33c60bc849290 Finished request 10. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.30.1 port 1162, id=5, length=557 Message-Authenticator = 0xcf284b18d28ce752c4a6ffb4e0bae462 Service-Type = Framed-User User-Name = "testuser@mydomain.ox.ac.uk" Framed-MTU = 1488 State = 0xbc7efc4cb87be53c4bf33c60bc849290 Called-Station-Id = "00-24-73-54-22-C2:Nuffield-WLAN" Calling-Station-Id = "40-D3-2D-7D-BA-D3" NAS-Identifier = "Wireless AP - I6" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 54Mbps 802.11g" EAP-Message = 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 EAP-Message = 0xca7e829ea010e9d664e7c3e8b22af4c5fa52a2ede114d436140301000101160301003082a7be7954291d4b5bf4735bb7757cbed2bd3086b51787f2870687d805cb7cf95090372f84d310b781705367239e2fa2 NAS-IP-Address = 192.168.30.1 NAS-Port = 1 NAS-Port-Id = "STA port # 1" +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] Looking up realm "mydomain.ox.ac.uk" for User-Name = "testuser@mydomain.ox.ac.uk" [suffix] Found realm "mydomain.ox.ac.uk" [suffix] Adding Stripped-User-Name = "testuser" [suffix] Adding Realm = "mydomain.ox.ac.uk" [suffix] Authentication realm is LOCAL. ++[suffix] returns ok [eap] EAP packet type response id 5 length 253 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 326 [peap] Length Included [peap] eaptls_verify returned 11 [peap] <<< TLS 1.0 Handshake [length 0106], ClientKeyExchange [peap] TLS_accept: SSLv3 read client key exchange A [peap] <<< TLS 1.0 ChangeCipherSpec [length 0001] [peap] <<< TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: SSLv3 read finished A [peap] >>> TLS 1.0 ChangeCipherSpec [length 0001] [peap] TLS_accept: SSLv3 write change cipher spec A [peap] >>> TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: SSLv3 write finished A [peap] TLS_accept: SSLv3 flush data [peap] (other): SSL negotiation finished successfully SSL Connection Established [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 5 to 192.168.30.1 port 1162 EAP-Message = 0x0106004119001403010001011603010030f615a58846d51361b77eab5683e34a0a744f3af094b2c5478a0a1042f89c4f48d3f71abaae4bd259922300d95ae0bfb4 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xbc7efc4cb978e53c4bf33c60bc849290 Finished request 11. Going to the next request Waking up in 4.7 seconds. Cleaning up request 6 ID 0 with timestamp +18 Cleaning up request 7 ID 1 with timestamp +18 Cleaning up request 8 ID 2 with timestamp +18 Cleaning up request 9 ID 3 with timestamp +18 Cleaning up request 10 ID 4 with timestamp +18 Cleaning up request 11 ID 5 with timestamp +19 Ready to process requests.