Ok, I have the following en the log: Ready to process requests. rad_recv: Access-Request packet from host 127.0.0.1:43271, id=191, length=56 User-Name = "vlal" User-Password = "vita99" NAS-IP-Address = 255.255.255.255 NAS-Port = 1 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 0 modcall[authorize]: module "preprocess" returns ok for request 0 rlm_realm: No '@' in User-Name = "vlal", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 0 users: Matched entry DEFAULT at line 152 modcall[authorize]: module "files" returns ok for request 0 modcall: group authorize returns ok for request 0 rad_check_password: Found Auth-Type System auth: type "System" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 0 rlm_unix: [vlal]: invalid password modcall[authenticate]: module "unix" returns reject for request 0 modcall: group authenticate returns reject for request 0 auth: Failed to validate the user. Delaying request 0 for 1 seconds Finished request 0 Going to the next request --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Sending Access-Reject of id 191 to 127.0.0.1:43271 Waking up in 4 seconds... --- Walking the entire request list --- Cleaning up request 0 ID 191 with timestamp 44d0d1c0 On 7/31/06, Alan DeKok <aland@deployingradius.com> wrote:
"Vida Luz Arista" <viaris@gmail.com> wrote:
I have installed rpm freeradius-1.0.4-1.FC4.1 on Fedora core 4, however I have the following problems, whe I use radtest for test my server
radtest kiko "kako99" localhost 1812 testing123 Sending Access-Request of id 215 to 127.0.0.1:1812 User-Name = "vlal" User-Password = "vita99" NAS-IP-Address = smtp.cablenet.com.ni NAS-Port = 1812 rad_recv: Access-Reject packet from host 127.0.0.1:1812, id=215, length=20
Ok...
I am testing the radius server with
[root@mailproxy3 raddb]# radiusd -X -A Starting - reading configuration files ... ... Ready to process requests.
I need you suggestions.
Post a debug log which shows the server receiving a packet?
Alan DeKok. -- http://deployingradius.com - The web site of the book http://deployingradius.com/blog/ - The blog - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html