Ok, Look, I should have accounting information about the client (for example all the attributes I need for disconnection) in the radacct table, right? Which ones? The one I past belowatleast, that at the moment are going to a file in "/var/log/freeradius/radacct" Tue Mar 27 09:57:42 2012 Acct-Status-Type = Accounting-On NAS-Identifier = "MikroTik" Acct-Delay-Time = 0 NAS-IP-Address = 192.168.1.11 Acct-Unique-Session-Id = "44c5e5334885d97c" Timestamp = 1332835062 Request-Authenticator = Verified Tue Mar 27 10:12:10 2012 Acct-Status-Type = Accounting-On NAS-Identifier = "MikroTik" Acct-Delay-Time = 0 NAS-IP-Address = 192.168.1.11 Acct-Unique-Session-Id = "44c5e5334885d97c" Timestamp = 1332835930 Request-Authenticator = Verified Tue Mar 27 10:30:48 2012 Acct-Status-Type = Accounting-On NAS-Identifier = "MikroTik" Acct-Delay-Time = 0 NAS-IP-Address = 192.168.1.11 Acct-Unique-Session-Id = "44c5e5334885d97c" Timestamp = 1332837048 Request-Authenticator = Verified Tue Mar 27 10:57:16 2012 Acct-Status-Type = Accounting-On NAS-Identifier = "MikroTik" Acct-Delay-Time = 0 NAS-IP-Address = 192.168.1.11 Acct-Unique-Session-Id = "44c5e5334885d97c" Timestamp = 1332838636 Request-Authenticator = Verified 2nd. I have Freeradius in debug mode, and the output is attached but I can't see where is the problem. I hope it's the information you wanted and you can help me. Best regards -----Original Message----- From: freeradius-users-bounces+fruiz002=hotmail.com@lists.freeradius.org [mailto:freeradius-users-bounces+fruiz002=hotmail.com@lists.freeradius.org] On Behalf Of Alan DeKok Sent: martes, 27 de marzo de 2012 10:53 To: FreeRadius users mailing list Subject: Re: FW: Radacct table not working properly Javier Ruiz Escalante wrote:
I send radius packets, (as long as I know...) I have a hotspot from Mikrotik and I have Radius configured, my client logs on and the information sent by MKT goes to a file but not to radacct table.
First, figure out exactly what's going on. "Information" is meaningless. Do you mean RADIUS accounting packets? And "goes to a file" is also meaningless. Which file? Why? And, AS ALWAYS, run the server in debugging mode to see what's going on. It's really not that hard. Alan DeKok. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html