Hello: I am trying to build the rpm for 2.0.1 on CentOS 5. The first oddity is that the source now comes as freeradius-server-2.0.1.tar.gz; starting the rpmbuild with $ rpmbuild -bb freeradius.spec yields an error that SOURCES/freeradius-2.0.1.tar.gz does not exist. I tried renaming freeradius-server-2.0.1.tar.gz to freeradius-2.0.1.tar.gz, and now the build starts, but it always ends with the following error: + STATUS=0 + '[' 0 -ne 0 ']' + cd freeradius-2.0.1 /var/tmp/rpm-tmp.71302: line 29: cd: freeradius-2.0.1: No such file or directory error: Bad exit status from /var/tmp/rpm-tmp.71302 (%prep) Here is the block from the rpm-tmp file: set -x umask 022 cd /home/along/rpmbuild/BUILD cd /home/along/rpmbuild/BUILD rm -rf freeradius-2.0.1 /bin/gzip -dc /home/along/rpmbuild/SOURCES/freeradius-2.0.1.tar.gz | tar -xvvf - STATUS=$? if [ $STATUS -ne 0 ]; then exit $STATUS fi cd freeradius-2.0.1 <----------------------------------------------LINE 29 [ `/usr/bin/id -u` = '0' ] && /bin/chown -Rhf root . [ `/usr/bin/id -u` = '0' ] && /bin/chgrp -Rhf root . /bin/chmod -Rf a+rX,u+w,g-w,o-w . I am not an expert with rpmbuild, so I apologize if this is a bit off-topic. I preceded the build with $ rpmbuild --clean freeradius.spec as I had previously build 1.1.7 on the same host. - Andrew