Hi Alen, In my case, I also want to use RadSec over TLS, that is why, I have to modify tls file in sites-enabled. Thanks & Regards, Parth Gajjar On 17/06/19, 8:04 PM, "Parth Gajjar (pagajjar)" <pagajjar@cisco.com> wrote: Thanks Alen, Is there any command to default the config. Thanks & Regards, Parth Gajjar On 17/06/19, 6:20 PM, "Freeradius-Users on behalf of Alan DeKok" <freeradius-users-bounces+pagajjar=cisco.com@lists.freeradius.org on behalf of aland@deployingradius.com> wrote: On Jun 17, 2019, at 8:39 AM, Parth Gajjar (pagajjar) via Freeradius-Users <freeradius-users@lists.freeradius.org> wrote: > I am facing below error, while using free radius. < radiusd.conf is attached> Don't do that. See http://wiki.freeradius.org/list-help > We are using dot1x, we have enabled pap & chap in the config. > Added clients & users in both files. > > Ready to process requests > (0) Received Access-Request Id 137 from 10.106.26.212:1645 to 10.105.41.247:1812 length 51 > (0) User-Password = "hello" > (0) User-Name = "parth" > (0) NAS-IP-Address = 10.106.26.212 > (0) ERROR: No Auth-Type found: rejecting the user via Post-Auth-Type = Reject > (0) Failed to authenticate the user Congratulations. You deleted all of the default virtual servers and broke FreeRADIUS. Don't do that. Discard all of your changes, and start with the default configuration. Alan DeKok. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html