Radius 3 EAP (PEAP) mschapv2 connection problem

3 Jun 2020

      Hello,

I was for several years successfully using Radius 2 with authentication
types EAP (PEAP) mschapv2. Now I've upgraded to Radius 3 with the same
authentication.
...
From laptop under MS Windows 10 I' trying to connect to WiFi network through
Access Points (AP). After some time I've managed to connect wifi network.
Then I've disconnected intentionally from network and attempted once more
connect to network but  this time failed to connect.
Radius debug log is very big, so I provide
extract from Radius debug log  below.
From debug log I see that laptop is eventually authenticated through AP
192.168.14.241 but going through many  unsuccessful steps.
The line
Login OK: [oreshkin] (from client 3com9150 port 0 cli 30-E3-7A-D5-61-F0)
shows that.
Why is it required so many steps to  successfully connect ?
Some errors in radius configuration ?

Second attempt to connect after disconnection is failed. Why ?
This time authentication is done through AP 192.168.14.247

FreeRADIUS Version 3.0.13
Copyright (C) 1999-2017 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/raddb/dictionary
including configuration file /etc/raddb/radiusd.conf
including configuration file /etc/raddb/proxy.conf
including configuration file /etc/raddb/clients.conf
including files in directory /etc/raddb/mods-enabled/
including configuration file /etc/raddb/mods-enabled/detail.log
including configuration file /etc/raddb/mods-enabled/mschap
including configuration file /etc/raddb/mods-enabled/expr
including configuration file /etc/raddb/mods-enabled/detail
including configuration file /etc/raddb/mods-enabled/cache_eap
including configuration file /etc/raddb/mods-enabled/attr_filter
including configuration file /etc/raddb/mods-enabled/passwd
including configuration file /etc/raddb/mods-enabled/eap
including configuration file /etc/raddb/mods-enabled/dhcp
including configuration file /etc/raddb/mods-enabled/realm
including configuration file /etc/raddb/mods-enabled/expiration
including configuration file /etc/raddb/mods-enabled/soh
including configuration file /etc/raddb/mods-enabled/preprocess
including configuration file /etc/raddb/mods-enabled/exec
including configuration file /etc/raddb/mods-enabled/radutmp
including configuration file /etc/raddb/mods-enabled/logintime
including configuration file /etc/raddb/mods-enabled/pap
including configuration file /etc/raddb/mods-enabled/date
including configuration file /etc/raddb/mods-enabled/unpack
including configuration file /etc/raddb/mods-enabled/sradutmp
including configuration file /etc/raddb/mods-enabled/dynamic_clients
including configuration file /etc/raddb/mods-enabled/linelog
including configuration file /etc/raddb/mods-enabled/ntlm_auth
including configuration file /etc/raddb/mods-enabled/digest
including configuration file /etc/raddb/mods-enabled/utf8
including configuration file /etc/raddb/mods-enabled/unix
including configuration file /etc/raddb/mods-enabled/echo
including configuration file /etc/raddb/mods-enabled/always
including configuration file /etc/raddb/mods-enabled/replicate
including configuration file /etc/raddb/mods-enabled/chap
including configuration file /etc/raddb/mods-enabled/files
including files in directory /etc/raddb/policy.d/
including configuration file /etc/raddb/policy.d/debug
including configuration file /etc/raddb/policy.d/operator-name
including configuration file /etc/raddb/policy.d/canonicalization
including configuration file /etc/raddb/policy.d/eap
including configuration file /etc/raddb/policy.d/dhcp
including configuration file /etc/raddb/policy.d/accounting
including configuration file /etc/raddb/policy.d/cui
including configuration file /etc/raddb/policy.d/filter
including configuration file /etc/raddb/policy.d/control
including files in directory /etc/raddb/sites-enabled/
including configuration file /etc/raddb/sites-enabled/default
including configuration file /etc/raddb/sites-enabled/inner-tunnel
main {
 security {
        user = "radiusd"
        group = "radiusd"
        allow_core_dumps = no
 }including configuration file /etc/raddb/mods-enabled/ntlm_auth
including configuration file /etc/raddb/mods-enabled/digest
including configuration file /etc/raddb/mods-enabled/utf8
including configuration file /etc/raddb/mods-enabled/unix
including configuration file /etc/raddb/mods-enabled/echo
including configuration file /etc/raddb/mods-enabled/always
including configuration file /etc/raddb/mods-enabled/replicate
including configuration file /etc/raddb/mods-enabled/chap
including configuration file /etc/raddb/mods-enabled/files
including files in directory /etc/raddb/policy.d/
including configuration file /etc/raddb/policy.d/debug
including configuration file /etc/raddb/policy.d/operator-name
including configuration file /etc/raddb/policy.d/canonicalization
including configuration file /etc/raddb/policy.d/eap
including configuration file /etc/raddb/policy.d/dhcp
including configuration file /etc/raddb/policy.d/accounting
including configuration file /etc/raddb/policy.d/cui
including configuration file /etc/raddb/policy.d/filter
including configuration file /etc/raddb/policy.d/control
including files in directory /etc/raddb/sites-enabled/
including configuration file /etc/raddb/sites-enabled/default
including configuration file /etc/raddb/sites-enabled/inner-tunnel
main {
 security {
        user = "radiusd"
        group = "radiusd"
        allow_core_dumps = no
 }
        name = "radiusd"
        prefix = "/usr"
        localstatedir = "/var"
        logdir = "/var/log/radius"
        run_dir = "/var/run/radiusd"
}
main {
        name = "radiusd"
        prefix = "/usr"
        localstatedir = "/var"

        name = "radiusd"
        prefix = "/usr"
        localstatedir = "/var"
        logdir = "/var/log/radius"
        run_dir = "/var/run/radiusd"
}
main {
        name = "radiusd"
        prefix = "/usr"
        localstatedir = "/var"
including configuration file /etc/raddb/mods-enabled/ntlm_auth
including configuration file /etc/raddb/mods-enabled/digest
including configuration file /etc/raddb/mods-enabled/utf8
including configuration file /etc/raddb/mods-enabled/unix
including configuration file /etc/raddb/mods-enabled/echo
including configuration file /etc/raddb/mods-enabled/always
including configuration file /etc/raddb/mods-enabled/replicate
including configuration file /etc/raddb/mods-enabled/chap
including configuration file /etc/raddb/mods-enabled/files
including files in directory /etc/raddb/policy.d/
including configuration file /etc/raddb/policy.d/debug
including configuration file /etc/raddb/policy.d/operator-name
including configuration file /etc/raddb/policy.d/canonicalization
including configuration file /etc/raddb/policy.d/eap
including configuration file /etc/raddb/policy.d/dhcp
including configuration file /etc/raddb/policy.d/accounting
including configuration file /etc/raddb/policy.d/cui
including configuration file /etc/raddb/policy.d/filter
including configuration file /etc/raddb/policy.d/control
including files in directory /etc/raddb/sites-enabled/
including configuration file /etc/raddb/sites-enabled/default
including configuration file /etc/raddb/sites-enabled/inner-tunnel
main {
 security {
        user = "radiusd"
        group = "radiusd"
        allow_core_dumps = no
 }
        name = "radiusd"
        prefix = "/usr"
        localstatedir = "/var"
        logdir = "/var/log/radius"
        run_dir = "/var/run/radiusd"
}
main {
        name = "radiusd"
        prefix = "/usr"
        localstatedir = "/var"

       sbindir = "/usr/sbin"
        logdir = "/var/log/radius"
        run_dir = "/var/run/radiusd"
        libdir = "/usr/lib64/freeradius"
        radacctdir = "/var/log/radius/radacct"
        hostname_lookups = no
        max_request_time = 30
        cleanup_delay = 5
        max_requests = 16384
        pidfile = "/var/run/radiusd/radiusd.pid"
        checkrad = "/usr/sbin/checkrad"
        debug_level = 0
        proxy_requests = yes
 log {
        stripped_names = no
        auth = yes
        auth_badpass = no
        auth_goodpass = no
        colourise = yes
        msg_denied = "You are already logged in - access denied"
 }
 resources {
 }
 security {
        max_attributes = 200
        reject_delay = 1.000000
        status_server = yes
 }
}
radiusd: #### Loading Realms and Home Servers ####
 proxy server {
        retry_delay = 5
        retry_count = 3
        default_fallback = no
        dead_time = 120
        wake_all_if_all_dead = no
 }
 home_server localhost {
  ipaddr = 127.0.0.1
        port = 1812
        type = "auth"
        secret = <<< secret >>>
        response_window = 20.000000
        response_timeouts = 1
        max_outstanding = 65536
        zombie_period = 40
        status_check = "status-server"
        ping_interval = 30
        check_interval = 30
        check_timeout = 4
        num_answers_to_alive = 3
        revive_interval = 120
  limit {
        max_connections = 16
        max_requests = 0
        lifetime = 0
        idle_timeout = 0
  }
  coa {
        irt = 2
        mrt = 16
        mrc = 5
        mrd = 30
  }
 }
 home_server_pool my_auth_failover {
        type = fail-over
        home_server = localhost
 }
 realm example.com {
        auth_pool = my_auth_failover
 }
 realm LOCAL {
 }
radiusd: #### Loading Clients ####
 client localhost {
        ipaddr = 127.0.0.1
        require_message_authenticator = no
        secret = <<< secret >>>
        nas_type = "other"
        proto = "*"
  limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
  }
 }
 client localhost_ipv6 {
        ipv6addr = ::1
        require_message_authenticator = no
        secret = <<< secret >>>
  limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
  }
 }
 client 192.168.14.241 {
        ipaddr = 192.168.14.241
        require_message_authenticator = no
        secret = <<< secret >>>
        shortname = "3com9150"
  limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
  }
 }
 client 192.168.14.247 {
        ipaddr = 192.168.14.247
        require_message_authenticator = no
        secret = <<< secret >>>
        shortname = "3com9552"
  limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
  }
 }
Debugger not attached
 # Creating Auth-Type = mschap
 # Creating Auth-Type = digest
 # Creating Auth-Type = eap
 # Creating Auth-Type = PAP
 # Creating Auth-Type = CHAP
 # Creating Auth-Type = MS-CHAP
radiusd: #### Instantiating modules ####
 modules {
  # Loaded module rlm_detail
  # Loading module "auth_log" from file /etc/raddb/mods-enabled/detail.log
  detail auth_log {
        filename =
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loading module "reply_log" from file /etc/raddb/mods-enabled/detail.log
  detail reply_log {
        filename =
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loading module "pre_proxy_log" from file
/etc/raddb/mods-enabled/detail.log
  detail pre_proxy_log {
        filename =
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address
}}/pre-proxy-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loading module "post_proxy_log" from file
/etc/raddb/mods-enabled/detail.log
  detail post_proxy_log {
        filename =
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loaded module rlm_mschap
  # Loading module "mschap" from file /etc/raddb/mods-enabled/mschap
  mschap {
        use_mppe = yes
        require_encryption = yes
        require_strong = yes
        with_ntdomain_hack = yes
   passchange {
   }
        allow_retry = yes
        winbind_retry_with_normalised_username = no
  }
  # Loaded module rlm_expr
  # Loading module "expr" from file /etc/raddb/mods-enabled/expr
  expr {
        safe_characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
/äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
  }
  # Loading module "detail" from file /etc/raddb/mods-enabled/detail
  detail {
        filename =
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address
}}/detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loaded module rlm_cache
  # Loading module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap
  cache cache_eap {
        driver = "rlm_cache_rbtree"
        key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
        ttl = 15
        max_entries = 0
        epoch = 0
        add_stats = no
  }
  # Loaded module rlm_attr_filter
  # Loading module "attr_filter.post-proxy" from file
/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.post-proxy {
        filename = "/etc/raddb/mods-config/attr_filter/post-proxy"
        key = "%{Realm}"
        relaxed = no
  }
  # Loading module "attr_filter.pre-proxy" from file
/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.pre-proxy {
        filename = "/etc/raddb/mods-config/attr_filter/pre-proxy"
        key = "%{Realm}"
        relaxed = no
  }
  # Loading module "attr_filter.access_reject" from file
/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.access_reject {
        filename = "/etc/raddb/mods-config/attr_filter/access_reject"
        key = "%{User-Name}"
        relaxed = no
  }
  # Loading module "attr_filter.access_challenge" from file
/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.access_challenge {
      filename = "/etc/raddb/mods-config/attr_filter/access_challenge"
        key = "%{User-Name}"
        relaxed = no
  }
  # Loading module "attr_filter.accounting_response" from file
/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.accounting_response {
        filename = "/etc/raddb/mods-config/attr_filter/accounting_response"
        key = "%{User-Name}"
        relaxed = no
  }
  # Loaded module rlm_passwd
  # Loading module "etc_passwd" from file /etc/raddb/mods-enabled/passwd
  passwd etc_passwd {
        filename = "/etc/passwd"
        format = "*User-Name:Crypt-Password:"
        delimiter = ":"
        ignore_nislike = no
        ignore_empty = yes
        allow_multiple_keys = no
        hash_size = 100
  }
  # Loaded module rlm_eap
  # Loading module "eap" from file /etc/raddb/mods-enabled/eap
  eap {
        default_eap_type = "peap"
        timer_expire = 60
        ignore_unknown_eap_types = no
        cisco_accounting_username_bug = no
        max_sessions = 16384
  }
  # Loaded module rlm_dhcp
  # Loading module "dhcp" from file /etc/raddb/mods-enabled/dhcp
  # Loaded module rlm_realm
  # Loading module "IPASS" from file /etc/raddb/mods-enabled/realm
  realm IPASS {
        format = "prefix"
        delimiter = "/"       ignore_default = no
        ignore_null = no
  }
  # Loading module "suffix" from file /etc/raddb/mods-enabled/realm
  realm suffix {
        format = "suffix"
        delimiter = "@"
        ignore_default = no
        ignore_null = no
  }
  # Loading module "realmpercent" from file /etc/raddb/mods-enabled/realm
  realm realmpercent {
        format = "suffix"
        delimiter = "%"
        ignore_default = no
        ignore_null = no
  }
  # Loading module "ntdomain" from file /etc/raddb/mods-enabled/realm
  realm ntdomain {
        format = "prefix"
        delimiter = "\\"
        ignore_default = no
        ignore_null = no
  }
  # Loaded module rlm_expiration
  # Loading module "expiration" from file /etc/raddb/mods-enabled/expiration
  # Loaded module rlm_soh
  # Loading module "soh" from file /etc/raddb/mods-enabled/soh
  soh {
        dhcp = yes
  }
  # Loaded module rlm_preprocess
  # Loading module "preprocess" from file /etc/raddb/mods-enabled/preprocess
  preprocess {
        huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups"
        hints = "/etc/raddb/mods-config/preprocess/hints"
        with_ascend_hack = no
        ascend_channels_per_line = 23
       with_ntdomain_hack = no
        with_specialix_jetstream_hack = no
        with_cisco_vsa_hack = no
        with_alvarion_vsa_hack = no
  }
  # Loaded module rlm_exec
  # Loading module "exec" from file /etc/raddb/mods-enabled/exec
  exec {
        wait = no
        input_pairs = "request"
        shell_escape = yes
        timeout = 10
  }
  # Loaded module rlm_radutmp
  # Loading module "radutmp" from file /etc/raddb/mods-enabled/radutmp
  radutmp {
        filename = "/var/log/radius/radutmp"
        username = "%{User-Name}"
        case_sensitive = yes
        check_with_nas = yes
        permissions = 384
        caller_id = yes
  }
  # Loaded module rlm_logintime
  # Loading module "logintime" from file /etc/raddb/mods-enabled/logintime
  logintime {
        minimum_timeout = 60
  }
  # Loaded module rlm_pap
  # Loading module "pap" from file /etc/raddb/mods-enabled/pap
  pap {
        normalise = yes
  }
  # Loaded module rlm_date
  # Loading module "date" from file /etc/raddb/mods-enabled/date
  date {
        format = "%b %e %Y %H:%M:%S %Z"
}
# Loaded module rlm_unpack
  # Loading module "unpack" from file /etc/raddb/mods-enabled/unpack
  # Loading module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp
  radutmp sradutmp {
        filename = "/var/log/radius/sradutmp"
        username = "%{User-Name}"
        case_sensitive = yes
        check_with_nas = yes
        permissions = 420
        caller_id = no
  }
  # Loaded module rlm_dynamic_clients
  # Loading module "dynamic_clients" from file
/etc/raddb/mods-enabled/dynamic_clients
  # Loaded module rlm_linelog
  # Loading module "linelog" from file /etc/raddb/mods-enabled/linelog
  linelog {
        filename = "/var/log/radius/linelog"
        escape_filenames = no
        syslog_severity = "info"
        permissions = 384
        format = "This is a log message for %{User-Name}"
        reference = "messages.%{%{reply:Packet-Type}:-default}"
  }
  # Loading module "log_accounting" from file
/etc/raddb/mods-enabled/linelog
  linelog log_accounting {
        filename = "/var/log/radius/linelog-accounting"
        escape_filenames = no
        syslog_severity = "info"
        permissions = 384
        format = ""
        reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
  }
  # Loading module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth
  exec ntlm_auth {
        wait = yes
        program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN
--username=%{mschap:User-Name} --password=%{User-Password}"
shell_escape = yes
  }
  # Loaded module rlm_digest
  # Loading module "digest" from file /etc/raddb/mods-enabled/digest
  # Loaded module rlm_utf8
  # Loading module "utf8" from file /etc/raddb/mods-enabled/utf8
  # Loaded module rlm_unix
  # Loading module "unix" from file /etc/raddb/mods-enabled/unix
  unix {
        radwtmp = "/var/log/radius/radwtmp"
  }
Creating attribute Unix-Group
  # Loading module "echo" from file /etc/raddb/mods-enabled/echo
  exec echo {
        wait = yes
        program = "/bin/echo %{User-Name}"
        input_pairs = "request"
        output_pairs = "reply"
        shell_escape = yes
  }
  # Loaded module rlm_always
  # Loading module "reject" from file /etc/raddb/mods-enabled/always
  always reject {
        rcode = "reject"
        simulcount = 0
        mpp = no
  }
  # Loading module "fail" from file /etc/raddb/mods-enabled/always
  always fail {
        rcode = "fail"
        simulcount = 0
        mpp = no
  }
  # Loading module "ok" from file /etc/raddb/mods-enabled/always
  always ok {
        rcode = "ok"
        simulcount = 0
        mpp = no
}
   # Loading module "handled" from file /etc/raddb/mods-enabled/always
  always handled {
        rcode = "handled"
        simulcount = 0
        mpp = no
  }
  # Loading module "invalid" from file /etc/raddb/mods-enabled/always
  always invalid {
        rcode = "invalid"
        simulcount = 0
        mpp = no
  }
  # Loading module "userlock" from file /etc/raddb/mods-enabled/always
  always userlock {
        rcode = "userlock"
        simulcount = 0
        mpp = no
  }
  # Loading module "notfound" from file /etc/raddb/mods-enabled/always
  always notfound {
        rcode = "notfound"
        simulcount = 0
        mpp = no
  }
  # Loading module "noop" from file /etc/raddb/mods-enabled/always
  always noop {
        rcode = "noop"
        simulcount = 0
        mpp = no
  }
  # Loading module "updated" from file /etc/raddb/mods-enabled/always
  always updated {
        rcode = "updated"
        simulcount = 0
        mpp = no
  }
  # Loaded module rlm_replicate
  # Loading module "replicate" from file /etc/raddb/mods-enabled/replicate
 # Loaded module rlm_chap
  # Loading module "chap" from file /etc/raddb/mods-enabled/chap
  # Loaded module rlm_files
  # Loading module "files" from file /etc/raddb/mods-enabled/files
  files {
        filename = "/etc/raddb/mods-config/files/authorize"
        acctusersfile = "/etc/raddb/mods-config/files/accounting"
        preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy"
  }
  instantiate {
  }
  # Instantiating module "auth_log" from file
/etc/raddb/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
detail output
  # Instantiating module "reply_log" from file
/etc/raddb/mods-enabled/detail.log
  # Instantiating module "pre_proxy_log" from file
/etc/raddb/mods-enabled/detail.log
  # Instantiating module "post_proxy_log" from file
/etc/raddb/mods-enabled/detail.log
  # Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap
rlm_mschap (mschap): using internal authentication
  # Instantiating module "detail" from file /etc/raddb/mods-enabled/detail
  # Instantiating module "cache_eap" from file
/etc/raddb/mods-enabled/cache_eap
rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree)
loaded and linked
  # Instantiating module "attr_filter.post-proxy" from file
/etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy
  # Instantiating module "attr_filter.pre-proxy" from file
/etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy
  # Instantiating module "attr_filter.access_reject" from file
/etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject
  # Instantiating module "attr_filter.access_challenge" from file
/etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge
  # Instantiating module "attr_filter.accounting_response" from file
/etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response
  # Instantiating module "etc_passwd" from file
/etc/raddb/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
  # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap
   # Linked to sub-module rlm_eap_md5
 # Linked to sub-module rlm_eap_leap
   # Linked to sub-module rlm_eap_gtc
   gtc {
        challenge = "Password: "
        auth_type = "PAP"
   }
   # Linked to sub-module rlm_eap_tls
   tls {
        tls = "tls-common"
   }
   tls-config tls-common {
        verify_depth = 0
        ca_path = "/etc/raddb/certs"
        pem_file_type = yes
        private_key_file = "/etc/raddb/certs/server.pem"
        certificate_file = "/etc/raddb/certs/server.pem"
        ca_file = "/etc/raddb/certs/ca.pem"
        private_key_password = <<< secret >>>
        dh_file = "/etc/raddb/certs/dh"
        fragment_size = 1024
        include_length = yes
        auto_chain = yes
        check_crl = no
        check_all_crl = no
        cipher_list = "DEFAULT"
        cipher_server_preference = no
        ecdh_curve = "prime256v1"
    cache {
        enable = no
        lifetime = 24
        max_entries = 255
    }
    verify {
        skip_if_ocsp_ok = no
    }
    ocsp {
        enable = no
        override_cert_url = yes
      url = "http://127.0.0.1/ocsp/"
        use_nonce = yes
        timeout = 0
        softfail = no
    }
   }
   # Linked to sub-module rlm_eap_ttls
   ttls {
        tls = "tls-common"
        default_eap_type = "md5"
        copy_request_to_tunnel = no
        use_tunneled_reply = no
        virtual_server = "inner-tunnel"
        include_length = yes
        require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_peap
   peap {
        tls = "tls-common"
        default_eap_type = "mschapv2"
        copy_request_to_tunnel = yes
        use_tunneled_reply = no
        proxy_tunneled_request_as_eap = no
        virtual_server = "inner-tunnel"
        soh = no
        require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_mschapv2
   mschapv2 {
        with_ntdomain_hack = no
        send_error = no
   }
  # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm
  # Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm
  # Instantiating module "realmpercent" from file
/etc/raddb/mods-enabled/realm
  # Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm

  # Instantiating module "expiration" from file
/etc/raddb/mods-enabled/expiration
  # Instantiating module "preprocess" from file
/etc/raddb/mods-enabled/preprocess
reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups
reading pairlist file /etc/raddb/mods-config/preprocess/hints
  # Instantiating module "logintime" from file
/etc/raddb/mods-enabled/logintime
  # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap
  # Instantiating module "linelog" from file /etc/raddb/mods-enabled/linelog
  # Instantiating module "log_accounting" from file
/etc/raddb/mods-enabled/linelog
  # Instantiating module "reject" from file /etc/raddb/mods-enabled/always
  # Instantiating module "fail" from file /etc/raddb/mods-enabled/always
  # Instantiating module "ok" from file /etc/raddb/mods-enabled/always
  # Instantiating module "handled" from file /etc/raddb/mods-enabled/always
  # Instantiating module "invalid" from file /etc/raddb/mods-enabled/always
  # Instantiating module "userlock" from file /etc/raddb/mods-enabled/always
  # Instantiating module "notfound" from file /etc/raddb/mods-enabled/always
  # Instantiating module "noop" from file /etc/raddb/mods-enabled/always
  # Instantiating module "updated" from file /etc/raddb/mods-enabled/always
  # Instantiating module "files" from file /etc/raddb/mods-enabled/files
reading pairlist file /etc/raddb/mods-config/files/authorize
reading pairlist file /etc/raddb/mods-config/files/accounting
reading pairlist file /etc/raddb/mods-config/files/pre-proxy
 } # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/raddb/radiusd.conf
} # server
server default { # from file /etc/raddb/sites-enabled/default
 # Loading authenticate {...}
 # Loading authorize {...}
 # Loading preacct {...}
 # Loading accounting {...}
 # Loading session {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
} # server default
server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel
 # Loading authenticate {...}
 # Loading authorize {...}
 # Loading session {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
 # Skipping contents of 'if' as it is always 'false' --
/etc/raddb/sites-enabled/inner-tunnel:291
} # server inner-tunnel
radiusd: #### Opening IP addresses and Ports ####
listen {
        type = "auth"
        ipaddr = *
        port = 0
   limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
   }
}
listen {
        type = "acct"
        ipaddr = *
        port = 0
   limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
   }
}
listen {
        type = "auth"
        ipv6addr = ::
        port = 0
   limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
   }
}
listen {
        type = "acct"
        ipv6addr = ::
       port = 0
   limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
   }
}
listen {
        type = "auth"
        ipaddr = 127.0.0.1
        port = 18120
}
Listening on auth address * port 1812 bound to server default
Listening on acct address * port 1813 bound to server default
Listening on auth address :: port 1812 bound to server default
Listening on acct address :: port 1813 bound to server default
Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
Listening on proxy address * port 44420
Listening on proxy address :: port 36131
Ready to process requests

....

(27) Received Access-Request Id 9 from 192.168.14.241:3074 to
xx.xx.xx.xx:1812 length 159
(27)   User-Name = "oreshkin"
(27)   NAS-IP-Address = 192.168.14.241
(27)   NAS-Port = 0
(27)   Called-Station-Id = "00-1E-C1-AE-56-22:HEPD-COMMON"
(27)   Calling-Station-Id = "30-E3-7A-D5-61-F0"
(27)   Framed-MTU = 1400
(27)   NAS-Port-Type = Wireless-802.11
(27)   Connect-Info = "CONNECT 0Mbps 802.11"
(27)   EAP-Message = 0x0201000d016f726573686b696e
(27)   Message-Authenticator = 0x10afad72dec6e948c7598d93b080d695
(27) # Executing section authorize from file
/etc/raddb/sites-enabled/default
(27)   authorize {
(27)     policy filter_username {

(27)       if (&User-Name) {
(27)       if (&User-Name)  -> TRUE
(27)       if (&User-Name)  {
(27)         if (&User-Name =~ / /) {
(27)         if (&User-Name =~ / /)  -> FALSE
(27)         if (&User-Name =~ /@[^@]*@/ ) {
(27)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(27)         if (&User-Name =~ /\.\./ ) {
(27)         if (&User-Name =~ /\.\./ )  -> FALSE
(27)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(27)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(27)         if (&User-Name =~ /\.$/)  {
(27)         if (&User-Name =~ /\.$/)   -> FALSE
(27)         if (&User-Name =~ /@\./)  {
(27)         if (&User-Name =~ /@\./)   -> FALSE
(27)       } # if (&User-Name)  = notfound
(27)     } # policy filter_username = notfound
(27)     [preprocess] = ok
(27)     [chap] = noop
(27)     [mschap] = noop
(27) suffix: Checking for suffix after "@"
(27) suffix: No '@' in User-Name = "oreshkin", looking up realm NULL
(27) suffix: No such realm "NULL"
(27)     [suffix] = noop
(27) ntdomain: Checking for prefix before "\"
(27) ntdomain: No '\' in User-Name = "oreshkin", looking up realm NULL
(27) ntdomain: No such realm "NULL"
(27)     [ntdomain] = noop
(27) eap: Peer sent EAP Response (code 2) ID 1 length 13
(27) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the
rest of authorize
(27)     [eap] = ok
(27)   } # authorize = ok
(27) Found Auth-Type = eap
(27) # Executing group from file /etc/raddb/sites-enabled/default
(27)   authenticate {
(27) eap: Peer sent packet with method EAP Identity (1)
(27) eap: Calling submodule eap_peap to process data
(27) eap_peap: Initiating new EAP-TLS session
27) eap_peap: [eaptls start] = request
(27) eap: Sending EAP Request (code 1) ID 2 length 6
(27) eap: EAP session adding &reply:State = 0x2222bfcc2220a606
(27)     [eap] = handled
(27)   } # authenticate = handled
(27) Using Post-Auth-Type Challenge
(27) # Executing group from file /etc/raddb/sites-enabled/default
(27)   Challenge { ... } # empty sub-section is ignored
(27) Sent Access-Challenge Id 9 from xx.xx.xx.xx:1812 to 192.168.14.241:3074
length 0
(27)   EAP-Message = 0x010200061920
(27)   Message-Authenticator = 0x00000000000000000000000000000000
(27)   State = 0x2222bfcc2220a60628942d36d3525ed7
(27) Finished request
(28) Received Access-Request Id 10 from 192.168.14.241:3074 to
xx.xx.xx.xx:1812 length 330
(28)   User-Name = "oreshkin"
(28)   NAS-IP-Address = 192.168.14.241
(28)   NAS-Port = 0
(28)   Called-Station-Id = "00-1E-C1-AE-56-22:HEPD-COMMON"
(28)   Calling-Station-Id = "30-E3-7A-D5-61-F0"
(28)   Framed-MTU = 1400
(28)   NAS-Port-Type = Wireless-802.11
(28)   Connect-Info = "CONNECT 0Mbps 802.11"
(28)   EAP-Message =
0x020200a619800000009c16030300970100009303035ed4e24d6ec1584f510f0866c1215851558a510205500495d8d13de5caee61ca00002ac02cc02bc030c02f009f009ec024c023c028c027c00ac009c014c013009d009c003d003c0035002f000a01000040000500050100000000000a00080006001d
(28)   State = 0x2222bfcc2220a60628942d36d3525ed7
(28)   Message-Authenticator = 0x6de97a654208715266eb91099cdb366a
(28) session-state: No cached attributes
(28) # Executing section authorize from file
/etc/raddb/sites-enabled/default
(28)   authorize {
(28)     policy filter_username {
(28)       if (&User-Name) {
(28)       if (&User-Name)  -> TRUE
(28)       if (&User-Name)  {
(28)         if (&User-Name =~ / /) {
(28)         if (&User-Name =~ / /)  -> FALSE
(28)         if (&User-Name =~ /@[^@]*@/ ) {
(28)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(28)         if (&User-Name =~ /\.\./ ) {
(28)         if (&User-Name =~ /\.\./ )  -> FALSE
(28)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(28)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(28)         if (&User-Name =~ /\.$/)  {
(28)         if (&User-Name =~ /\.$/)   -> FALSE
(28)         if (&User-Name =~ /@\./)  {
(28)         if (&User-Name =~ /@\./)   -> FALSE
(28)       } # if (&User-Name)  = notfound
(28)     } # policy filter_username = notfound
(28)     [preprocess] = ok
(28)     [chap] = noop
(28)     [mschap] = noop
(28) suffix: Checking for suffix after "@"
(28) suffix: No '@' in User-Name = "oreshkin", looking up realm NULL
(28) suffix: No such realm "NULL"
(28)     [suffix] = noop
(28) ntdomain: Checking for prefix before "\"
(28) ntdomain: No '\' in User-Name = "oreshkin", looking up realm NULL
(28) ntdomain: No such realm "NULL"
(28)     [ntdomain] = noop
(28) eap: Peer sent EAP Response (code 2) ID 2 length 166
(28) eap: Continuing tunnel setup
(28)     [eap] = ok
(28)   } # authorize = ok
(28) Found Auth-Type = eap
(28) # Executing group from file /etc/raddb/sites-enabled/default
(28)   authenticate {
(28) eap: Expiring EAP session with state 0x2222bfcc2220a606
(28) eap: Finished EAP session with state 0x2222bfcc2220a606
(28) eap: Previous EAP request found for state 0x2222bfcc2220a606, released
from the list
(28) eap: Peer sent packet with method EAP PEAP (25)
(28) eap: Calling submodule eap_peap to process data
(28) eap_peap: Continuing EAP-TLS
(28) eap_peap: Peer indicated complete TLS record size will be 156 bytes
(28) eap_peap: Got complete TLS record (156 bytes)
(28) eap_peap: [eaptls verify] = length included
(28) eap_peap: (other): before/accept initialization
(28) eap_peap: TLS_accept: before/accept initialization
(28) eap_peap: <<< recv TLS 1.2  [length 0097]
(28) eap_peap: TLS_accept: SSLv3 read client hello A
(28) eap_peap: >>> send TLS 1.2  [length 0039]
(28) eap_peap: TLS_accept: SSLv3 write server hello A
(28) eap_peap: >>> send TLS 1.2  [length 08d3]
(28) eap_peap: TLS_accept: SSLv3 write certificate A
(28) eap_peap: >>> send TLS 1.2  [length 014d]
(28) eap_peap: TLS_accept: SSLv3 write key exchange A
(28) eap_peap: >>> send TLS 1.2  [length 0004]
(28) eap_peap: TLS_accept: SSLv3 write server done A
(28) eap_peap: TLS_accept: SSLv3 flush data
(28) eap_peap: TLS_accept: SSLv3 read client certificate A
(28) eap_peap: TLS_accept: Need to read more data: SSLv3 read client key
exchange A
(28) eap_peap: TLS_accept: Need to read more data: SSLv3 read client key
exchange A
(28) eap_peap: In SSL Handshake Phase
(28) eap_peap: In SSL Accept mode
(28) eap_peap: [eaptls process] = handled
(28) eap: Sending EAP Request (code 1) ID 3 length 1004
(28) eap: EAP session adding &reply:State = 0x2222bfcc2321a606
(28)     [eap] = handled
(28)   } # authenticate = handled
(28) Using Post-Auth-Type Challenge
(28) # Executing group from file /etc/raddb/sites-enabled/default
(28)   Challenge { ... } # empty sub-section is ignored
(28) Sent Access-Challenge Id 10 from xx.xx.xx.xx:1812 to
192.168.14.241:3074 length 0
(28)   EAP-Message =
0x010303ec19c000000a711603030039020000350303b8ccee05d9782beb17d6b77494dd7361478f4ed8ffecf71d49e93e03d5d4f67a00c03000000dff01000100000b00040300010216030308d30b0008cf0008cc0003de308203da308202c2a003020102020101300d06092a864886f70d01010b050030
(28)   Message-Authenticator = 0x00000000000000000000000000000000
(28)   State = 0x2222bfcc2321a60628942d36d3525ed7
(28) Finished request
(22) Cleaning up request packet ID 64 with timestamp +16
(23) Cleaning up request packet ID 65 with timestamp +16
(24) Cleaning up request packet ID 66 with timestamp +16
(25) Cleaning up request packet ID 67 with timestamp +16
(29) Received Access-Request Id 11 from 192.168.14.241:3074 to
xx.xx.xx.xx:1812 length 170
(29)   User-Name = "oreshkin"
(29)   NAS-IP-Address = 192.168.14.241
(29)   NAS-Port = 0
(29)   Called-Station-Id = "00-1E-C1-AE-56-22:HEPD-COMMON"
(29)   Calling-Station-Id = "30-E3-7A-D5-61-F0"
(29)   Framed-MTU = 1400
(29)   NAS-Port-Type = Wireless-802.11
(29)   Connect-Info = "CONNECT 0Mbps 802.11"
(29)   EAP-Message = 0x020300061900
(29)   State = 0x2222bfcc2321a60628942d36d3525ed7
(29)   Message-Authenticator = 0xcebca6a1adb3df4e5aeddedcd23c1249
(29) session-state: No cached attributes
(29) # Executing section authorize from file
/etc/raddb/sites-enabled/default
(29)   authorize {
(29)     policy filter_username {
(29)       if (&User-Name) {
(29)       if (&User-Name)  -> TRUE
(29)       if (&User-Name)  {
(29)         if (&User-Name =~ / /) {
(29)         if (&User-Name =~ / /)  -> FALSE
(29)         if (&User-Name =~ /@[^@]*@/ ) {
(29)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(29)         if (&User-Name =~ /\.\./ ) {
(29)         if (&User-Name =~ /\.\./ )  -> FALSE
(29)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(29)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(29)         if (&User-Name =~ /\.$/)  {
(29)         if (&User-Name =~ /\.$/)   -> FALSE
(29)         if (&User-Name =~ /@\./)  {
(29)         if (&User-Name =~ /@\./)   -> FALSE
(29)       } # if (&User-Name)  = notfound
(29)     } # policy filter_username = notfound
(29)     [preprocess] = ok
(29)     [chap] = noop
(29)     [mschap] = noop
(29) suffix: Checking for suffix after "@"
(29) suffix: No '@' in User-Name = "oreshkin", looking up realm NULL
(29) suffix: No such realm "NULL"
(29)     [suffix] = noop
(29) ntdomain: Checking for prefix before "\"
(29) ntdomain: No '\' in User-Name = "oreshkin", looking up realm NULL
(29) ntdomain: No such realm "NULL"
(29)     [ntdomain] = noop
(29) eap: Peer sent EAP Response (code 2) ID 3 length 6
(29) eap: Continuing tunnel setup
(29)     [eap] = ok
(29)   } # authorize = ok
(29) Found Auth-Type = eap
(29) # Executing group from file /etc/raddb/sites-enabled/default
(29)   authenticate {
(29) eap: Expiring EAP session with state 0x2222bfcc2321a606
(29) eap: Finished EAP session with state 0x2222bfcc2321a606
(29) eap: Previous EAP request found for state 0x2222bfcc2321a606, released
from the list
(29) eap: Peer sent packet with method EAP PEAP (25)
(29) eap: Calling submodule eap_peap to process data
(29) eap_peap: Continuing EAP-TLS
(29) eap_peap: Peer ACKed our handshake fragment
(29) eap_peap: [eaptls verify] = request
(29) eap_peap: [eaptls process] = handled
(29) eap: Sending EAP Request (code 1) ID 4 length 1000
(29) eap: EAP session adding &reply:State = 0x2222bfcc2026a606
(29)     [eap] = handled
(29)   } # authenticate = handled
(29) Using Post-Auth-Type Challenge
(29) # Executing group from file /etc/raddb/sites-enabled/default
(29)   Challenge { ... } # empty sub-section is ignored
(29) Sent Access-Challenge Id 11 from xx.xx.xx.xx:1812 to
192.168.14.241:3074 length 0
(29)   EAP-Message =
0x010403e81940f380d8c5155b8eb1fb79d0094a95a1908aa3d079dcf2dab14e3c12a2ab5494d1c2430b1e8c6de4b03899f1315c96304f66bb40bd632d817172ece81732a4256ffbf9df90317051de700004e8308204e4308203cca003020102020900d5c6e8bb4ac2077e300d06092a864886f70d01010b
(29)   Message-Authenticator = 0x00000000000000000000000000000000
(29)   State = 0x2222bfcc2026a60628942d36d3525ed7
(29) Finished request
(26) Cleaning up request packet ID 68 with timestamp +16
Waking up in 4.9 seconds.
(30) Received Access-Request Id 12 from 192.168.14.241:3074 to
xx.xx.xx.xx:1812 length 170
(30)   User-Name = "oreshkin"
(30)   NAS-IP-Address = 192.168.14.241
(30)   NAS-Port = 0
(30)   Called-Station-Id = "00-1E-C1-AE-56-22:HEPD-COMMON"
(30)   Calling-Station-Id = "30-E3-7A-D5-61-F0"
(30)   Framed-MTU = 1400
(30)   NAS-Port-Type = Wireless-802.11
(30)   Connect-Info = "CONNECT 0Mbps 802.11"
(30)   EAP-Message = 0x020400061900
(30)   State = 0x2222bfcc2026a60628942d36d3525ed7
(30)   Message-Authenticator = 0x8e292c39aebf1d998465743dfbcd6989
(30) session-state: No cached attributes
(30) # Executing section authorize from file
/etc/raddb/sites-enabled/default
(30)   authorize {
(30)     policy filter_username {
(30)       if (&User-Name) {
(30)       if (&User-Name)  -> TRUE
(30)       if (&User-Name)  {
(30)         if (&User-Name =~ / /) {
(30)         if (&User-Name =~ / /)  -> FALSE
(30)         if (&User-Name =~ /@[^@]*@/ ) {
(30)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(30)         if (&User-Name =~ /\.\./ ) {
(30)         if (&User-Name =~ /\.\./ )  -> FALSE
(30)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(30)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(30)         if (&User-Name =~ /\.$/)  {
(30)         if (&User-Name =~ /\.$/)   -> FALSE
(30)         if (&User-Name =~ /@\./)  {
(30)         if (&User-Name =~ /@\./)   -> FALSE
(30)       } # if (&User-Name)  = notfound
(30)     } # policy filter_username = notfound
(30)     [preprocess] = ok
(30)     [chap] = noop
(30)     [mschap] = noop
(30) suffix: Checking for suffix after "@"
(30) suffix: No '@' in User-Name = "oreshkin", looking up realm NULL
(30) suffix: No such realm "NULL"
(30)     [suffix] = noop
(30) ntdomain: Checking for prefix before "\"
(30) ntdomain: No '\' in User-Name = "oreshkin", looking up realm NULL
(30) ntdomain: No such realm "NULL"
(30)     [ntdomain] = noop
(30) eap: Peer sent EAP Response (code 2) ID 4 length 6
(30) eap: Continuing tunnel setup
(30)     [eap] = ok
(30)   } # authorize = ok
(30) Found Auth-Type = eap
(30) # Executing group from file /etc/raddb/sites-enabled/default
(30)   authenticate {
(30) eap: Expiring EAP session with state 0x2222bfcc2026a606
(30) eap: Finished EAP session with state 0x2222bfcc2026a606
(30) eap: Previous EAP request found for state 0x2222bfcc2026a606, released
from the list
(30) eap: Peer sent packet with method EAP PEAP (25)
(30) eap: Calling submodule eap_peap to process data
(30) eap_peap: Continuing EAP-TLS
(30) eap_peap: Peer ACKed our handshake fragment
(30) eap_peap: [eaptls verify] = request
(30) eap_peap: [eaptls process] = handled
(30) eap: Sending EAP Request (code 1) ID 5 length 691
(30) eap: EAP session adding &reply:State = 0x2222bfcc2127a606
(30)     [eap] = handled
(30)   } # authenticate = handled
(30) Using Post-Auth-Type Challenge
(30) # Executing group from file /etc/raddb/sites-enabled/default
(30)   Challenge { ... } # empty sub-section is ignored
(30) Sent Access-Challenge Id 12 from xx.xx.xx.xx:1812 to
192.168.14.241:3074 length 0
(30)   EAP-Message =
0x010502b319000530030101ff30360603551d1f042f302d302ba029a0278625687474703a2f2f7777772e6578616d706c652e6f72672f6578616d706c655f63612e63726c300d06092a864886f70d01010b050003820101007f15d37224ffa7b8db1d8ed23f49758db260c870aeedbcb0b706dfda4b208f
(30)   Message-Authenticator = 0x00000000000000000000000000000000
(30)   State = 0x2222bfcc2127a60628942d36d3525ed7
(30) Finished request
Waking up in 4.9 seconds.
(31) Received Access-Request Id 13 from 192.168.14.241:3074 to
xx.xx.xx.xx:1812 length 300
(31)   User-Name = "oreshkin"
(31)   NAS-IP-Address = 192.168.14.241
(31)   NAS-Port = 0
(31)   Called-Station-Id = "00-1E-C1-AE-56-22:HEPD-COMMON"
(31)   Calling-Station-Id = "30-E3-7A-D5-61-F0"
(31)   Framed-MTU = 1400
(31)   NAS-Port-Type = Wireless-802.11
(31)   Connect-Info = "CONNECT 0Mbps 802.11"
(31)   EAP-Message =
0x0205008819800000007e1603030046100000424104c0e14c73bf2789c0ac2c6de846eccfec4299866b1828da3ec76f49d47dae95a4fff5cdde5604d0e85e89c920b7c3683117977853940ed4d7395217f042fdd76c14030300010116030300280000000000000000065edd34aad7b3965d58aa1d763c75
(31)   State = 0x2222bfcc2127a60628942d36d3525ed7
(31)   Message-Authenticator = 0x04dff77641cddb023c91d4edab1e2f78
(31) session-state: No cached attributes
(31) # Executing section authorize from file
/etc/raddb/sites-enabled/default
(31)   authorize {
(31)     policy filter_username {
(31)       if (&User-Name) {
(31)       if (&User-Name)  -> TRUE
(31)       if (&User-Name)  {
(31)         if (&User-Name =~ / /) {
(31)         if (&User-Name =~ / /)  -> FALSE
(31)         if (&User-Name =~ /@[^@]*@/ ) {
(31)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(31)         if (&User-Name =~ /\.\./ ) {
(31)         if (&User-Name =~ /\.\./ )  -> FALSE
(31)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(31)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(31)         if (&User-Name =~ /\.$/)  {
(31)         if (&User-Name =~ /\.$/)   -> FALSE
(31)         if (&User-Name =~ /@\./)  {
(31)         if (&User-Name =~ /@\./)   -> FALSE
(31)       } # if (&User-Name)  = notfound
(31)     } # policy filter_username = notfound
(31)     [preprocess] = ok
(31)     [chap] = noop
(31)     [mschap] = noop
(31) suffix: Checking for suffix after "@"
(31) suffix: No '@' in User-Name = "oreshkin", looking up realm NULL
(31) suffix: No such realm "NULL"
(31)     [suffix] = noop
(31) ntdomain: Checking for prefix before "\"
(31) ntdomain: No '\' in User-Name = "oreshkin", looking up realm NULL
(31) ntdomain: No such realm "NULL"
(31)     [ntdomain] = noop
(31) eap: Peer sent EAP Response (code 2) ID 5 length 136
(31) eap: Continuing tunnel setup
(31)     [eap] = ok
(31)   } # authorize = ok
(31) Found Auth-Type = eap
(31) # Executing group from file /etc/raddb/sites-enabled/default
(31)   authenticate {
(31) eap: Expiring EAP session with state 0x2222bfcc2127a606
(31) eap: Finished EAP session with state 0x2222bfcc2127a606
(31) eap: Previous EAP request found for state 0x2222bfcc2127a606, released
from the list
(31) eap: Peer sent packet with method EAP PEAP (25)
(31) eap: Calling submodule eap_peap to process data
(31) eap_peap: Continuing EAP-TLS
(31) eap_peap: Peer indicated complete TLS record size will be 126 bytes
(31) eap_peap: Got complete TLS record (126 bytes)
(31) eap_peap: [eaptls verify] = length included
(31) eap_peap: <<< recv TLS 1.2  [length 0046]
(31) eap_peap: TLS_accept: SSLv3 read client key exchange A
(31) eap_peap: TLS_accept: SSLv3 read certificate verify A
(31) eap_peap: <<< recv TLS 1.2  [length 0001]
(31) eap_peap: <<< recv TLS 1.2  [length 0010]
(31) eap_peap: TLS_accept: SSLv3 read finished A
(31) eap_peap: >>> send TLS 1.2  [length 0001]
(31) eap_peap: TLS_accept: SSLv3 write change cipher spec A
(31) eap_peap: >>> send TLS 1.2  [length 0010]
(31) eap_peap: TLS_accept: SSLv3 write finished A
(31) eap_peap: TLS_accept: SSLv3 flush data
(31) eap_peap: (other): SSL negotiation finished successfully
(31) eap_peap: SSL Connection Established
(31) eap_peap: [eaptls process] = handled
(31) eap: Sending EAP Request (code 1) ID 6 length 57
(31) eap: EAP session adding &reply:State = 0x2222bfcc2624a606
(31)     [eap] = handled
(31)   } # authenticate = handled
(31) Using Post-Auth-Type Challenge
(31) # Executing group from file /etc/raddb/sites-enabled/default
(31)   Challenge { ... } # empty sub-section is ignored
(31) Sent Access-Challenge Id 13 from xx.xx.xx.xx:1812 to
192.168.14.241:3074 length 0
(31)   EAP-Message =
0x01060039190014030300010116030300281feeee9e22725fa44b48439675c0566117c5e508aa3b8f83d39300efb57a13f459b0ca500d4285ce
(31)   Message-Authenticator = 0x00000000000000000000000000000000
(31)   State = 0x2222bfcc2624a60628942d36d3525ed7
(31) Finished request
Waking up in 4.9 seconds.
(32) Received Access-Request Id 14 from 192.168.14.241:3074 to
xx.xx.xx.xx:1812 length 170
(32)   User-Name = "oreshkin"
(32)   NAS-IP-Address = 192.168.14.241
(32)   NAS-Port = 0
(32)   Called-Station-Id = "00-1E-C1-AE-56-22:HEPD-COMMON"
(32)   Calling-Station-Id = "30-E3-7A-D5-61-F0"
(32)   Framed-MTU = 1400
(32)   NAS-Port-Type = Wireless-802.11
(32)   Connect-Info = "CONNECT 0Mbps 802.11"
(32)   EAP-Message = 0x020600061900
(32)   State = 0x2222bfcc2624a60628942d36d3525ed7
(32)   Message-Authenticator = 0x50d9a449b0125139aa7b9c77879e7e9e
(32) session-state: No cached attributes
(32) # Executing section authorize from file
/etc/raddb/sites-enabled/default
(32)   authorize {
(32)     policy filter_username {
(32)       if (&User-Name) {
(32)       if (&User-Name)  -> TRUE
(32)       if (&User-Name)  {
(32)         if (&User-Name =~ / /) {
(32)         if (&User-Name =~ / /)  -> FALSE
(32)         if (&User-Name =~ /@[^@]*@/ ) {
(32)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(32)         if (&User-Name =~ /\.\./ ) {
(32)         if (&User-Name =~ /\.\./ )  -> FALSE
(32)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(32)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(32)         if (&User-Name =~ /\.$/)  {
(32)         if (&User-Name =~ /\.$/)   -> FALSE
(32)         if (&User-Name =~ /@\./)  {
(32)         if (&User-Name =~ /@\./)   -> FALSE
(32)       } # if (&User-Name)  = notfound
(32)     } # policy filter_username = notfound
(32)     [preprocess] = ok
(32)     [chap] = noop
(32)     [mschap] = noop
(32) suffix: Checking for suffix after "@"
(32) suffix: No '@' in User-Name = "oreshkin", looking up realm NULL
(32) suffix: No such realm "NULL"
(32)     [suffix] = noop
(32) ntdomain: Checking for prefix before "\"
(32) ntdomain: No '\' in User-Name = "oreshkin", looking up realm NULL
(32) ntdomain: No such realm "NULL"
(32)     [ntdomain] = noop
(32) eap: Peer sent EAP Response (code 2) ID 6 length 6
(32) eap: Continuing tunnel setup
(32)     [eap] = ok
(32)   } # authorize = ok
(32) Found Auth-Type = eap
(32) # Executing group from file /etc/raddb/sites-enabled/default
(32)   authenticate {
(32) eap: Expiring EAP session with state 0x2222bfcc2624a606
(32) eap: Finished EAP session with state 0x2222bfcc2624a606
(32) eap: Previous EAP request found for state 0x2222bfcc2624a606, released
from the list
(32) eap: Peer sent packet with method EAP PEAP (25)
(32) eap: Calling submodule eap_peap to process data
(32) eap_peap: Continuing EAP-TLS
(32) eap_peap: Peer ACKed our handshake fragment.  handshake is finished
(32) eap_peap: [eaptls verify] = success
(32) eap_peap: [eaptls process] = success
(32) eap_peap: Session established.  Decoding tunneled attributes
(32) eap_peap: PEAP state TUNNEL ESTABLISHED
(32) eap: Sending EAP Request (code 1) ID 7 length 40
(32) eap: EAP session adding &reply:State = 0x2222bfcc2725a606
(32)     [eap] = handled
(32)   } # authenticate = handled
(32) Using Post-Auth-Type Challenge
(32) # Executing group from file /etc/raddb/sites-enabled/default
(32)   Challenge { ... } # empty sub-section is ignored
(32) Sent Access-Challenge Id 14 from xx.xx.xx.xx:1812 to
192.168.14.241:3074 length 0
(32)   EAP-Message =
0x010700281900170303001d1feeee9e22725fa54fe4e60beebfa029a12274227e8b2438d10345a5a5
(32)   Message-Authenticator = 0x00000000000000000000000000000000
(32)   State = 0x2222bfcc2725a60628942d36d3525ed7
(32) Finished request
Waking up in 4.8 seconds.
(33) Received Access-Request Id 15 from 192.168.14.241:3074 to
xx.xx.xx.xx:1812 length 208
(33)   User-Name = "oreshkin"
(33)   NAS-IP-Address = 192.168.14.241
(33)   NAS-Port = 0
(33)   Called-Station-Id = "00-1E-C1-AE-56-22:HEPD-COMMON"
(33)   Calling-Station-Id = "30-E3-7A-D5-61-F0"
(33)   Framed-MTU = 1400
(33)   NAS-Port-Type = Wireless-802.11
(33)   Connect-Info = "CONNECT 0Mbps 802.11"
(33)   EAP-Message =
0x0207002c190017030300210000000000000001c43c8f6fdd9427eb6a99a7d0a165800d6370295331a09e3fbc
(33)   State = 0x2222bfcc2725a60628942d36d3525ed7
(33)   Message-Authenticator = 0x1d17d29c090616db20f12d470ecee14b
(33) session-state: No cached attributes
(33) # Executing section authorize from file
/etc/raddb/sites-enabled/default
(33)   authorize {
(33)     policy filter_username {
(33)       if (&User-Name) {
(33)       if (&User-Name)  -> TRUE
(33)       if (&User-Name)  {
(33)         if (&User-Name =~ / /) {
(33)         if (&User-Name =~ / /)  -> FALSE
(33)         if (&User-Name =~ /@[^@]*@/ ) {
(33)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(33)         if (&User-Name =~ /\.\./ ) {
(33)         if (&User-Name =~ /\.\./ )  -> FALSE
(33)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(33)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(33)         if (&User-Name =~ /\.$/)  {
(33)         if (&User-Name =~ /\.$/)   -> FALSE
(33)         if (&User-Name =~ /@\./)  {
(33)         if (&User-Name =~ /@\./)   -> FALSE
(33)       } # if (&User-Name)  = notfound
(33)     } # policy filter_username = notfound
(33)     [preprocess] = ok
(33)     [chap] = noop
(33)     [mschap] = noop
(33) suffix: Checking for suffix after "@"
(33) suffix: No '@' in User-Name = "oreshkin", looking up realm NULL
(33) suffix: No such realm "NULL"
(33)     [suffix] = noop
(33) ntdomain: Checking for prefix before "\"
(33) ntdomain: No '\' in User-Name = "oreshkin", looking up realm NULL
(33) ntdomain: No such realm "NULL"
(33)     [ntdomain] = noop
(33) eap: Peer sent EAP Response (code 2) ID 7 length 44
(33) eap: Continuing tunnel setup
(33)     [eap] = ok
(33)   } # authorize = ok
(33) Found Auth-Type = eap
(33) # Executing group from file /etc/raddb/sites-enabled/default
(33)   authenticate {
(33) eap: Expiring EAP session with state 0x2222bfcc2725a606
(33) eap: Finished EAP session with state 0x2222bfcc2725a606
(33) eap: Previous EAP request found for state 0x2222bfcc2725a606, released
from the list
(33) eap: Peer sent packet with method EAP PEAP (25)
(33) eap: Calling submodule eap_peap to process data
(33) eap_peap: Continuing EAP-TLS
(33) eap_peap: [eaptls verify] = ok
(33) eap_peap: Done initial handshake
(33) eap_peap: [eaptls process] = ok
(33) eap_peap: Session established.  Decoding tunneled attributes
(33) eap_peap: PEAP state WAITING FOR INNER IDENTITY
(33) eap_peap: Identity - oreshkin
(33) eap_peap: Got inner identity 'oreshkin'
(33) eap_peap: Setting default EAP type for tunneled EAP session
(33) eap_peap: Got tunneled request
(33) eap_peap:   EAP-Message = 0x0207000d016f726573686b696e
(33) eap_peap: Setting User-Name to oreshkin
(33) eap_peap: Sending tunneled request to inner-tunnel
(33) eap_peap:   EAP-Message = 0x0207000d016f726573686b696e
(33) eap_peap:   FreeRADIUS-Proxied-To = 127.0.0.1
(33) eap_peap:   User-Name = "oreshkin"
(33) eap_peap:   NAS-IP-Address = 192.168.14.241
(33) eap_peap:   NAS-Port = 0
(33) eap_peap:   Called-Station-Id = "00-1E-C1-AE-56-22:HEPD-COMMON"
(33) eap_peap:   Calling-Station-Id = "30-E3-7A-D5-61-F0"
(33) eap_peap:   Framed-MTU = 1400
(33) eap_peap:   NAS-Port-Type = Wireless-802.11
(33) eap_peap:   Connect-Info = "CONNECT 0Mbps 802.11"
(33) eap_peap:   Event-Timestamp = "Jun  1 2020 14:11:07 MSK"
(33) Virtual server inner-tunnel received request
(33)   EAP-Message = 0x0207000d016f726573686b696e
(33)   FreeRADIUS-Proxied-To = 127.0.0.1
(33)   User-Name = "oreshkin"
(33)   NAS-IP-Address = 192.168.14.241
(33)   NAS-Port = 0
(33)   Called-Station-Id = "00-1E-C1-AE-56-22:HEPD-COMMON"
(33)   Calling-Station-Id = "30-E3-7A-D5-61-F0"
(33)   Framed-MTU = 1400
(33)   NAS-Port-Type = Wireless-802.11
(33)   Connect-Info = "CONNECT 0Mbps 802.11"
(33)   Event-Timestamp = "Jun  1 2020 14:11:07 MSK"
(33) WARNING: Outer and inner identities are the same.  User privacy is
compromised.
(33) server inner-tunnel {
(33)   # Executing section authorize from file
/etc/raddb/sites-enabled/inner-tunnel
(33)     authorize {
(33)       policy filter_username {
(33)         if (&User-Name) {
(33)         if (&User-Name)  -> TRUE
(33)         if (&User-Name)  {
(33)           if (&User-Name =~ / /) {
(33)           if (&User-Name =~ / /)  -> FALSE
(33)           if (&User-Name =~ /@[^@]*@/ ) {
(33)           if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(33)           if (&User-Name =~ /\.\./ ) {
(33)           if (&User-Name =~ /\.\./ )  -> FALSE
(33)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(33)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(33)           if (&User-Name =~ /\.$/)  {
(33)           if (&User-Name =~ /\.$/)   -> FALSE
(33)           if (&User-Name =~ /@\./)  {
(33)           if (&User-Name =~ /@\./)   -> FALSE
(33)         } # if (&User-Name)  = notfound
(33)       } # policy filter_username = notfound
(33)       [chap] = noop
(33)       [mschap] = noop
(33) ntdomain: Checking for prefix before "\"
(33) ntdomain: No '\' in User-Name = "oreshkin", looking up realm NULL
(33) ntdomain: No such realm "NULL"
(33)       [ntdomain] = noop
(33)       update control {
(33)         &Proxy-To-Realm := LOCAL
(33)       } # update control = noop
(33) eap: Peer sent EAP Response (code 2) ID 7 length 13
(33) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the
rest of authorize
(33)       [eap] = ok
(33)     } # authorize = ok
(33)   Found Auth-Type = eap
(33)   # Executing group from file /etc/raddb/sites-enabled/inner-tunnel
(33)     authenticate {
(33) eap: Peer sent packet with method EAP Identity (1)
(33) eap: Calling submodule eap_mschapv2 to process data
(33) eap_mschapv2: Issuing Challenge
(33) eap: Sending EAP Request (code 1) ID 8 length 43
(33) eap: EAP session adding &reply:State = 0x1dd632c31dde288d
(33)       [eap] = handled
(33)     } # authenticate = handled
(33) } # server inner-tunnel
(33) Virtual server sending reply
(33)   EAP-Message =
0x0108002b1a0108002610f22807a784c8ac25b4e82eb44c9eb3566672656572
332e302e3133
(33)   Message-Authenticator = 0x00000000000000000000000000000000
(33)   State = 0x1dd632c31dde288df7cfa5a922a8b8be
(33) eap_peap: Got tunneled reply code 11
(33) eap_peap:   EAP-Message =
0x0108002b1a0108002610f22807a784c8ac25b4e82eb44c9eb356667265657261646975732d332e302e3133
(33) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000
(33) eap_peap:   State = 0x1dd632c31dde288df7cfa5a922a8b8be
(33) eap_peap: Got tunneled reply RADIUS code 11
(33) eap_peap:   EAP-Message =
0x0108002b1a0108002610f22807a784c8ac25b4e82eb44c9eb356667265657261646975732d332e302e3133
(33) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000
(33) eap_peap:   State = 0x1dd632c31dde288df7cfa5a922a8b8be
(33) eap_peap: Got tunneled Access-Challenge
(33) eap: Sending EAP Request (code 1) ID 8 length 74
(33) eap: EAP session adding &reply:State = 0x2222bfcc242aa606
(33)     [eap] = handled
(33)   } # authenticate = handled
(33) Using Post-Auth-Type Challenge
(33) # Executing group from file /etc/raddb/sites-enabled/default
(33)   Challenge { ... } # empty sub-section is ignored
(33) Sent Access-Challenge Id 15 from xx.xx.xx.xx:1812 to
192.168.14.241:3074 length 0
(33)   EAP-Message =
0x0108004a1900170303003f1feeee9e22725fa63f6dd2b2bc40fd535f0bd42e921aa6fd435dca53973ed33bedaf1cae5cad77d02d7d7ecedc5d194cc08380f9e4aba56fed70ec9e057a66
(33)   Message-Authenticator = 0x00000000000000000000000000000000
(33)   State = 0x2222bfcc242aa60628942d36d3525ed7
(33) Finished request
Waking up in 4.8 seconds.
(34) Received Access-Request Id 16 from 192.168.14.241:3074 to
xx.xx.xx.xx:1812 length 262
(34)   User-Name = "oreshkin"
(34)   NAS-IP-Address = 192.168.14.241
(34)   NAS-Port = 0
(34)   Called-Station-Id = "00-1E-C1-AE-56-22:HEPD-COMMON"
(34)   Calling-Station-Id = "30-E3-7A-D5-61-F0"
(34)   Framed-MTU = 1400
(34)   NAS-Port-Type = Wireless-802.11
(34)   Connect-Info = "CONNECT 0Mbps 802.11"
(34)   EAP-Message =
0x02080062190017030300570000000000000002b1ca594d92465090474574968130029f19a0
05d703bc9c9809769f140e03f21c415269bc636a285507d431f357dce8a215e689e72cd5357a9289d97662c5261f77ff60aed4b95de307f84bf3a5b82f
(34)   State = 0x2222bfcc242aa60628942d36d3525ed7
(34)   Message-Authenticator = 0xd9b738c8478c4b6c5149525e35e7d34c
(34) session-state: No cached attributes
(34) # Executing section authorize from file
/etc/raddb/sites-enabled/default
(34)   authorize {
(34)     policy filter_username {
(34)       if (&User-Name) {
(34)       if (&User-Name)  -> TRUE
(34)       if (&User-Name)  {
(34)         if (&User-Name =~ / /) {
(34)         if (&User-Name =~ / /)  -> FALSE
(34)         if (&User-Name =~ /@[^@]*@/ ) {
(34)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(34)         if (&User-Name =~ /\.\./ ) {
(34)         if (&User-Name =~ /\.\./ )  -> FALSE
(34)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(34)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(34)         if (&User-Name =~ /\.$/)  {
(34)         if (&User-Name =~ /\.$/)   -> FALSE
(34)         if (&User-Name =~ /@\./)  {
(34)         if (&User-Name =~ /@\./)   -> FALSE
(34)       } # if (&User-Name)  = notfound
(34)     } # policy filter_username = notfound
(34)     [preprocess] = ok
(34)     [chap] = noop
(34)     [mschap] = noop
(34) suffix: Checking for suffix after "@"
(34) suffix: No '@' in User-Name = "oreshkin", looking up realm NULL
(34) suffix: No such realm "NULL"
(34)     [suffix] = noop
(34) ntdomain: Checking for prefix before "\"
(34) ntdomain: No '\' in User-Name = "oreshkin", looking up realm NULL
(34) ntdomain: No such realm "NULL"
(34)     [ntdomain] = noop
(34) eap: Peer sent EAP Response (code 2) ID 8 length 98
(34) eap: Continuing tunnel setup
(34)     [eap] = ok
(34)   } # authorize = ok
(34) Found Auth-Type = eap
(34) # Executing group from file /etc/raddb/sites-enabled/default
(34)   authenticate {
(34) eap: Expiring EAP session with state 0x1dd632c31dde288d
(34) eap: Finished EAP session with state 0x2222bfcc242aa606
(34) eap: Previous EAP request found for state 0x2222bfcc242aa606, released
from the list
(34) eap: Peer sent packet with method EAP PEAP (25)
(34) eap: Calling submodule eap_peap to process data
(34) eap_peap: Continuing EAP-TLS
(34) eap_peap: [eaptls verify] = ok
(34) eap_peap: Done initial handshake
(34) eap_peap: [eaptls process] = ok
(34) eap_peap: Session established.  Decoding tunneled attributes
(34) eap_peap: PEAP state phase2
(34) eap_peap: EAP method MSCHAPv2 (26)
(34) eap_peap: Got tunneled request
(34) eap_peap:   EAP-Message =
0x020800431a0208003e314a1eef1aefdbd4954a91ec2d440941c30000000000000000b897a0241bf2a36e9f466fde3363685b3e998796f98ef75e006f726573686b696e
(34) eap_peap: Setting User-Name to oreshkin
(34) eap_peap: Sending tunneled request to inner-tunnel
(34) eap_peap:   EAP-Message =
0x020800431a0208003e314a1eef1aefdbd4954a91ec2d440941c30000000000000000b897a0241bf2a36e9f466fde3363685b3e998796f98ef75e006f726573686b696e
(34) eap_peap:   FreeRADIUS-Proxied-To = 127.0.0.1
(34) eap_peap:   User-Name = "oreshkin"
(34) eap_peap:   State = 0x1dd632c31dde288df7cfa5a922a8b8be
(34) eap_peap:   NAS-IP-Address = 192.168.14.241
(34) eap_peap:   NAS-Port = 0
(34) eap_peap:   Called-Station-Id = "00-1E-C1-AE-56-22:HEPD-COMMON"
(34) eap_peap:   Calling-Station-Id = "30-E3-7A-D5-61-F0"
(34) eap_peap:   Framed-MTU = 1400
(34) eap_peap:   NAS-Port-Type = Wireless-802.11
(34) eap_peap:   Connect-Info = "CONNECT 0Mbps 802.11"
(34) eap_peap:   Event-Timestamp = "Jun  1 2020 14:11:07 MSK"
(34) Virtual server inner-tunnel received request
(34)   EAP-Message =
0x020800431a0208003e314a1eef1aefdbd4954a91ec2d440941c30000000000000000b897a0241bf2a36e9f466fde3363685b3e998796f98ef75e006f726573686b696e
(34)   FreeRADIUS-Proxied-To = 127.0.0.1
(34)   User-Name = "oreshkin"
(34)   State = 0x1dd632c31dde288df7cfa5a922a8b8be
(34)   NAS-IP-Address = 192.168.14.241
(34)   NAS-Port = 0
(34)   Called-Station-Id = "00-1E-C1-AE-56-22:HEPD-COMMON"
(34)   Calling-Station-Id = "30-E3-7A-D5-61-F0"
(34)   Framed-MTU = 1400
(34)   NAS-Port-Type = Wireless-802.11
(34)   Connect-Info = "CONNECT 0Mbps 802.11"
(34)   Event-Timestamp = "Jun  1 2020 14:11:07 MSK"
(34) WARNING: Outer and inner identities are the same.  User privacy is
compromised.
(34) server inner-tunnel {
(34)   session-state: No cached attributes
(34)   # Executing section authorize from file
/etc/raddb/sites-enabled/inner-tunnel
(34)     authorize {
(34)       policy filter_username {
(34)         if (&User-Name) {
(34)         if (&User-Name)  -> TRUE
(34)         if (&User-Name)  {
(34)           if (&User-Name =~ / /) {
(34)           if (&User-Name =~ / /)  -> FALSE
(34)           if (&User-Name =~ /@[^@]*@/ ) {
(34)           if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(34)           if (&User-Name =~ /\.\./ ) {
(34)           if (&User-Name =~ /\.\./ )  -> FALSE
(34)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(34)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(34)           if (&User-Name =~ /\.$/)  {
(34)           if (&User-Name =~ /\.$/)   -> FALSE
(34)           if (&User-Name =~ /@\./)  {
(34)           if (&User-Name =~ /@\./)   -> FALSE
(34)         } # if (&User-Name)  = notfound
(34)       } # policy filter_username = notfound
(34)       [chap] = noop
(34)       [mschap] = noop
(34) ntdomain: Checking for prefix before "\"
(34) ntdomain: No '\' in User-Name = "oreshkin", looking up realm NULL
(34) ntdomain: No such realm "NULL"
(34)       [ntdomain] = noop
(34)       update control {
(34)         &Proxy-To-Realm := LOCAL
(34)       } # update control = noop
(34) eap: Peer sent EAP Response (code 2) ID 8 length 67
(34) eap: No EAP Start, assuming it's an on-going EAP conversation
(34)       [eap] = updated
(34) files: users: Matched entry oreshkin at line 728
(34)       [files] = ok
(34)       [expiration] = noop
(34)       [logintime] = noop
(34) pap: WARNING: Auth-Type already set.  Not setting to PAP
(34)       [pap] = noop
(34)     } # authorize = updated
(34)   Found Auth-Type = eap
(34)   # Executing group from file /etc/raddb/sites-enabled/inner-tunnel
(34)     authenticate {
(34) eap: Expiring EAP session with state 0x1dd632c31dde288d
(34) eap: Finished EAP session with state 0x1dd632c31dde288d
(34) eap: Previous EAP request found for state 0x1dd632c31dde288d, released
from the list
(34) eap: Peer sent packet with method EAP MSCHAPv2 (26)
(34) eap: Calling submodule eap_mschapv2 to process data
(34) eap_mschapv2: # Executing group from file
/etc/raddb/sites-enabled/inner-tunnel
(34) eap_mschapv2:   authenticate {
(34) mschap: Found Cleartext-Password, hashing to create NT-Password
(34) mschap: Found Cleartext-Password, hashing to create LM-Password
(34) mschap: Creating challenge hash with username: oreshkin
(34) mschap: Client is using MS-CHAPv2
(34) mschap: Adding MS-CHAPv2 MPPE keys
(34)     [mschap] = ok
(34)   } # authenticate = ok
(34) MSCHAP Success
(34) eap: Sending EAP Request (code 1) ID 9 length 51
(34) eap: EAP session adding &reply:State = 0x1dd632c31cdf288d
(34)       [eap] = handled
(34)     } # authenticate = handled
(34) } # server inner-tunnel
(34) Virtual server sending reply
(34)   EAP-Message =
0x010900331a0308002e533d30324346323542454231343833353235394443363237323645464245363432323632363538384244
(34)   Message-Authenticator = 0x00000000000000000000000000000000
(34)   State = 0x1dd632c31cdf288df7cfa5a922a8b8be
(34) eap_peap: Got tunneled reply code 11
(34) eap_peap:   EAP-Message =
0x010900331a0308002e533d30324346323542454231343833353235394443363237323645464245363432323632363538384244
(34) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000
(34) eap_peap:   State = 0x1dd632c31cdf288df7cfa5a922a8b8be
(34) eap_peap: Got tunneled reply RADIUS code 11
(34) eap_peap:   EAP-Message =
0x010900331a0308002e533d30324346323542454231343833353235394443363237323645464245363432323632363538384244
(34) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000
(34) eap_peap:   State = 0x1dd632c31cdf288df7cfa5a922a8b8be
(34) eap_peap: Got tunneled Access-Challenge
(34) eap: Sending EAP Request (code 1) ID 9 length 82
(34) eap: EAP session adding &reply:State = 0x2222bfcc252ba606
(34)     [eap] = handled
(34)   } # authenticate = handled
(34) Using Post-Auth-Type Challenge
(34) # Executing group from file /etc/raddb/sites-enabled/default
(34)   Challenge { ... } # empty sub-section is ignored
(34) Sent Access-Challenge Id 16 from xx.xx.xx.xx:1812 to
192.168.14.241:3074 length 0
(34)   EAP-Message =
0x01090052190017030300471feeee9e22725fa77d4a1988d4cffb328b87a72552c98ea6c33233bfd8b173580ac94dc3bd3b15708f84649e4230151e9ba7ae4d28a897165a23c186ec8169760eaa368f3dc609
(34)   Message-Authenticator = 0x00000000000000000000000000000000
(34)   State = 0x2222bfcc252ba60628942d36d3525ed7
(34) Finished request
Waking up in 4.8 seconds.
(35) Received Access-Request Id 17 from 192.168.14.241:3074 to
xx.xx.xx.xx:1812 length 201
(35)   User-Name = "oreshkin"
(35)   NAS-IP-Address = 192.168.14.241
(35)   NAS-Port = 0
(35)   Called-Station-Id = "00-1E-C1-AE-56-22:HEPD-COMMON"
(35)   Calling-Station-Id = "30-E3-7A-D5-61-F0"
(35)   Framed-MTU = 1400
(35)   NAS-Port-Type = Wireless-802.11
(35)   Connect-Info = "CONNECT 0Mbps 802.11"
(35)   EAP-Message =
0x020900251900170303001a000000000000000308f965d693ae358a19765eea02daa8d034d7
(35)   State = 0x2222bfcc252ba60628942d36d3525ed7
(35)   Message-Authenticator = 0xe0581c5f414c920a96ec2b806d6a78b9
(35) session-state: No cached attributes
(35) # Executing section authorize from file
/etc/raddb/sites-enabled/default
(35)   authorize {
(35)     policy filter_username {
(35)       if (&User-Name) {
(35)       if (&User-Name)  -> TRUE
(35)       if (&User-Name)  {
(35)         if (&User-Name =~ / /) {
(35)         if (&User-Name =~ / /)  -> FALSE
(35)         if (&User-Name =~ /@[^@]*@/ ) {
(35)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(35)         if (&User-Name =~ /\.\./ ) {
(35)         if (&User-Name =~ /\.\./ )  -> FALSE
(35)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(35)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(35)         if (&User-Name =~ /\.$/)  {
(35)         if (&User-Name =~ /\.$/)   -> FALSE
(35)         if (&User-Name =~ /@\./)  {
(35)         if (&User-Name =~ /@\./)   -> FALSE
(35)       } # if (&User-Name)  = notfound
(35)     } # policy filter_username = notfound
(35)     [preprocess] = ok
(35)     [chap] = noop
(35)     [mschap] = noop
(35) suffix: Checking for suffix after "@"
(35) suffix: No '@' in User-Name = "oreshkin", looking up realm NULL
(35) suffix: No such realm "NULL"
(35)     [suffix] = noop
(35) ntdomain: Checking for prefix before "\"
(35) ntdomain: No '\' in User-Name = "oreshkin", looking up realm NULL
(35) ntdomain: No such realm "NULL"
(35)     [ntdomain] = noop
(35) eap: Peer sent EAP Response (code 2) ID 9 length 37
(35) eap: Continuing tunnel setup
(35)     [eap] = ok
(35)   } # authorize = ok
(35) Found Auth-Type = eap
(35) # Executing group from file /etc/raddb/sites-enabled/default
(35)   authenticate {
(35) eap: Expiring EAP session with state 0x1dd632c31cdf288d
(35) eap: Finished EAP session with state 0x2222bfcc252ba606
(35) eap: Previous EAP request found for state 0x2222bfcc252ba606, released
from the list
(35) eap: Peer sent packet with method EAP PEAP (25)
(35) eap: Calling submodule eap_peap to process data
(35) eap_peap: Continuing EAP-TLS
(35) eap_peap: [eaptls verify] = ok
(35) eap_peap: Done initial handshake
(35) eap_peap: [eaptls process] = ok
(35) eap_peap: Session established.  Decoding tunneled attributes
(35) eap_peap: PEAP state phase2
(35) eap_peap: EAP method MSCHAPv2 (26)
(35) eap_peap: Got tunneled request
(35) eap_peap:   EAP-Message = 0x020900061a03
(35) eap_peap: Setting User-Name to oreshkin
(35) eap_peap: Sending tunneled request to inner-tunnel
(35) eap_peap:   EAP-Message = 0x020900061a03
(35) eap_peap:   FreeRADIUS-Proxied-To = 127.0.0.1
(35) eap_peap:   User-Name = "oreshkin"
(35) eap_peap:   State = 0x1dd632c31cdf288df7cfa5a922a8b8be
(35) eap_peap:   NAS-IP-Address = 192.168.14.241
(35) eap_peap:   NAS-Port = 0
(35) eap_peap:   Called-Station-Id = "00-1E-C1-AE-56-22:HEPD-COMMON"
(35) eap_peap:   Calling-Station-Id = "30-E3-7A-D5-61-F0"
(35) eap_peap:   Framed-MTU = 1400
(35) eap_peap:   NAS-Port-Type = Wireless-802.11
(35) eap_peap:   Connect-Info = "CONNECT 0Mbps 802.11"
(35) eap_peap:   Event-Timestamp = "Jun  1 2020 14:11:07 MSK"
(35) Virtual server inner-tunnel received request
(35)   EAP-Message = 0x020900061a03
(35)   FreeRADIUS-Proxied-To = 127.0.0.1
(35)   User-Name = "oreshkin"
(35)   State = 0x1dd632c31cdf288df7cfa5a922a8b8be
(35)   NAS-IP-Address = 192.168.14.241
(35)   NAS-Port = 0
(35)   Called-Station-Id = "00-1E-C1-AE-56-22:HEPD-COMMON"
(35)   Calling-Station-Id = "30-E3-7A-D5-61-F0"
(35)   Framed-MTU = 1400
(35)   NAS-Port-Type = Wireless-802.11
(35)   Connect-Info = "CONNECT 0Mbps 802.11"
(35)   Event-Timestamp = "Jun  1 2020 14:11:07 MSK"
(35) WARNING: Outer and inner identities are the same.  User privacy is
compromised.
(35) server inner-tunnel {
(35)   session-state: No cached attributes
(35)   # Executing section authorize from file
/etc/raddb/sites-enabled/inner-tunnel
(35)     authorize {
(35)       policy filter_username {
(35)         if (&User-Name) {
(35)         if (&User-Name)  -> TRUE
(35)         if (&User-Name)  {
(35)           if (&User-Name =~ / /) {
(35)           if (&User-Name =~ / /)  -> FALSE
(35)           if (&User-Name =~ /@[^@]*@/ ) {
(35)           if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(35)           if (&User-Name =~ /\.\./ ) {
(35)           if (&User-Name =~ /\.\./ )  -> FALSE
(35)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(35)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(35)           if (&User-Name =~ /\.$/)  {
(35)           if (&User-Name =~ /\.$/)   -> FALSE
(35)           if (&User-Name =~ /@\./)  {
(35)           if (&User-Name =~ /@\./)   -> FALSE
(35)         } # if (&User-Name)  = notfound
(35)       } # policy filter_username = notfound
(35)       [chap] = noop
(35)       [mschap] = noop
(35) ntdomain: Checking for prefix before "\"
(35) ntdomain: No '\' in User-Name = "oreshkin", looking up realm NULL
(35) ntdomain: No such realm "NULL"
(35)       [ntdomain] = noop
(35)       update control {
(35)         &Proxy-To-Realm := LOCAL
(35)       } # update control = noop
(35) eap: Peer sent EAP Response (code 2) ID 9 length 6
(35) eap: No EAP Start, assuming it's an on-going EAP conversation
(35)       [eap] = updated
(35) files: users: Matched entry oreshkin at line 728
(35)       [files] = ok
(35)       [expiration] = noop
(35)       [logintime] = noop
(35) pap: WARNING: Auth-Type already set.  Not setting to PAP
(35)       [pap] = noop
(35)     } # authorize = updated
(35)   Found Auth-Type = eap
(35)   # Executing group from file /etc/raddb/sites-enabled/inner-tunnel
(35)     authenticate {
(35) eap: Expiring EAP session with state 0x1dd632c31cdf288d
(35) eap: Finished EAP session with state 0x1dd632c31cdf288d
(35) eap: Previous EAP request found for state 0x1dd632c31cdf288d, released
from the list
(35) eap: Peer sent packet with method EAP MSCHAPv2 (26)
(35) eap: Calling submodule eap_mschapv2 to process data
(35) eap: Sending EAP Success (code 3) ID 9 length 4
(35) eap: Freeing handler
(35)       [eap] = ok
(35)     } # authenticate = ok
(35)   # Executing section post-auth from file
/etc/raddb/sites-enabled/inner-tunnel
(35)     post-auth {
(35)       if (0) {
(35)       if (0)  -> FALSE
(35)     } # post-auth = noop
(35)   Login OK: [oreshkin] (from client 3com9150 port 0 cli
30-E3-7A-D5-61-F0 via TLS tunnel)
(35) } # server inner-tunnel
(35) Virtual server sending reply
(35)   MS-MPPE-Encryption-Policy = Encryption-Required
(35)   MS-MPPE-Encryption-Types = 4
(35)   MS-MPPE-Send-Key = 0x5da4080dbf52477047d2baf22acf65af
(35)   MS-MPPE-Recv-Key = 0x1b90fde298c73fa9e0de2b19567540cd
(35)   EAP-Message = 0x03090004
(35)   Message-Authenticator = 0x00000000000000000000000000000000
(35)   User-Name = "oreshkin"
(35) eap_peap: Got tunneled reply code 2
(35) eap_peap:   MS-MPPE-Encryption-Policy = Encryption-Required
(35) eap_peap:   MS-MPPE-Encryption-Types = 4
(35) eap_peap:   MS-MPPE-Send-Key = 0x5da4080dbf52477047d2baf22acf65af
(35) eap_peap:   MS-MPPE-Recv-Key = 0x1b90fde298c73fa9e0de2b19567540cd
(35) eap_peap:   EAP-Message = 0x03090004
(35) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000
(35) eap_peap:   User-Name = "oreshkin"
(35) eap_peap: Got tunneled reply RADIUS code 2
(35) eap_peap:   MS-MPPE-Encryption-Policy = Encryption-Required
(35) eap_peap:   MS-MPPE-Encryption-Types = 4
(35) eap_peap:   MS-MPPE-Send-Key = 0x5da4080dbf52477047d2baf22acf65af
(35) eap_peap:   MS-MPPE-Recv-Key = 0x1b90fde298c73fa9e0de2b19567540cd
(35) eap_peap:   EAP-Message = 0x03090004
(35) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000
(35) eap_peap:   User-Name = "oreshkin"
(35) eap_peap: Tunneled authentication was successful
(35) eap_peap: SUCCESS
(35) eap: Sending EAP Request (code 1) ID 10 length 46
(35) eap: EAP session adding &reply:State = 0x2222bfcc2a28a606
(35)     [eap] = handled
(35)   } # authenticate = handled
(35) Using Post-Auth-Type Challenge
(35) # Executing group from file /etc/raddb/sites-enabled/default
(35)   Challenge { ... } # empty sub-section is ignored
(35) Sent Access-Challenge Id 17 from xx.xx.xx.xx:1812 to
192.168.14.241:3074 length 0
(35)   EAP-Message =
0x010a002e190017030300231feeee9e22725fa86e26961d4d9425cb3d5690d742a77469436f5b5507676f8ac34619
(35)   Message-Authenticator = 0x00000000000000000000000000000000
(35)   State = 0x2222bfcc2a28a60628942d36d3525ed7
(35) Finished request
Waking up in 4.8 seconds.
(36) Received Access-Request Id 18 from 192.168.14.241:3074 to
xx.xx.xx.xx:1812 length 210
(36)   User-Name = "oreshkin"
(36)   NAS-IP-Address = 192.168.14.241
(36)   NAS-Port = 0
(36)   Called-Station-Id = "00-1E-C1-AE-56-22:HEPD-COMMON"
(36)   Calling-Station-Id = "30-E3-7A-D5-61-F0"
(36)   Framed-MTU = 1400
(36)   NAS-Port-Type = Wireless-802.11
(36)   Connect-Info = "CONNECT 0Mbps 802.11"
(36)   EAP-Message =
0x020a002e1900170303002300000000000000040814eaddad977aba9b9a202a970c8539f80a70f481e31acc4b18a6
(36)   State = 0x2222bfcc2a28a60628942d36d3525ed7
(36)   Message-Authenticator = 0x426d48103bec1433b0a2ded9016bc666
(36) session-state: No cached attributes
(36) # Executing section authorize from file
/etc/raddb/sites-enabled/default
(36)   authorize {
(36)     policy filter_username {
(36)       if (&User-Name) {
(36)       if (&User-Name)  -> TRUE
(36)       if (&User-Name)  {
(36)         if (&User-Name =~ / /) {
(36)         if (&User-Name =~ / /)  -> FALSE
(36)         if (&User-Name =~ /@[^@]*@/ ) {
(36)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(36)         if (&User-Name =~ /\.\./ ) {
(36)         if (&User-Name =~ /\.\./ )  -> FALSE
(36)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(36)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(36)         if (&User-Name =~ /\.$/)  {
(36)         if (&User-Name =~ /\.$/)   -> FALSE
(36)         if (&User-Name =~ /@\./)  {
(36)         if (&User-Name =~ /@\./)   -> FALSE
(36)       } # if (&User-Name)  = notfound
(36)     } # policy filter_username = notfound
(36)     [preprocess] = ok
(36)     [chap] = noop
(36)     [mschap] = noop
(36) suffix: Checking for suffix after "@"
(36) suffix: No '@' in User-Name = "oreshkin", looking up realm NULL
(36) suffix: No such realm "NULL"
(36)     [suffix] = noop
(36) ntdomain: Checking for prefix before "\"
(36) ntdomain: No '\' in User-Name = "oreshkin", looking up realm NULL
(36) ntdomain: No such realm "NULL"
(36)     [ntdomain] = noop
(36) eap: Peer sent EAP Response (code 2) ID 10 length 46
(36) eap: Continuing tunnel setup
(36)     [eap] = ok
(36)   } # authorize = ok
(36) Found Auth-Type = eap
(36) # Executing group from file /etc/raddb/sites-enabled/default
(36)   authenticate {
(36) eap: Expiring EAP session with state 0x2222bfcc2a28a606
(36) eap: Finished EAP session with state 0x2222bfcc2a28a606
(36) eap: Previous EAP request found for state 0x2222bfcc2a28a606, released
from the list
(36) eap: Peer sent packet with method EAP PEAP (25)
(36) eap: Calling submodule eap_peap to process data
(36) eap_peap: Continuing EAP-TLS
(36) eap_peap: [eaptls verify] = ok
(36) eap_peap: Done initial handshake
(36) eap_peap: [eaptls process] = ok
(36) eap_peap: Session established.  Decoding tunneled attributes
(36) eap_peap: PEAP state send tlv success
(36) eap_peap: Received EAP-TLV response
(36) eap_peap: Success
(36) eap: Sending EAP Success (code 3) ID 10 length 4
(36) eap: Freeing handler
(36)     [eap] = ok
(36)   } # authenticate = ok
(36) # Executing section post-auth from file
/etc/raddb/sites-enabled/default
(36)   post-auth {
(36)     update {
(36)       No attributes updated
(36)     } # update = noop
(36)     [exec] = noop
(36)     policy remove_reply_message_if_eap {
(36)       if (&reply:EAP-Message && &reply:Reply-Message) {
(36)       if (&reply:EAP-Message && &reply:Reply-Message)  -> FALSE
(36)       else {
(36)         [noop] = noop
(36)       } # else = noop
(36)     } # policy remove_reply_message_if_eap = noop
(36)   } # post-auth = noop
(36) Login OK: [oreshkin] (from client 3com9150 port 0 cli
30-E3-7A-D5-61-F0)
(36) Sent Access-Accept Id 18 from xx.xx.xx.xx:1812 to 192.168.14.241:3074
length 0
(36)   MS-MPPE-Recv-Key =
0x9dff8ef64bae409f37046dbfa31ac19b59eef04d273cf316c153c61440c1e5a0
(36)   MS-MPPE-Send-Key =
0x1ba4f3026a65b2b07900c7c9864c64fbff479b43710b12a2045e764f16a80bc5
(36)   EAP-Message = 0x030a0004
(36)   Message-Authenticator = 0x00000000000000000000000000000000
(36)   User-Name = "oreshkin"
(36) Finished request
Waking up in 4.8 seconds.
(27) Cleaning up request packet ID 9 with timestamp +21
(28) Cleaning up request packet ID 10 with timestamp +21
(29) Cleaning up request packet ID 11 with timestamp +21
(30) Cleaning up request packet ID 12 with timestamp +21
(31) Cleaning up request packet ID 13 with timestamp +21
(32) Cleaning up request packet ID 14 with timestamp +21
(33) Cleaning up request packet ID 15 with timestamp +21
(34) Cleaning up request packet ID 16 with timestamp +21
(35) Cleaning up request packet ID 17 with timestamp +21
(36) Cleaning up request packet ID 18 with timestamp +21
Ready to process requests

....

(56) Received Access-Request Id 78 from 192.168.14.247:1024 to
xx.xx.xx.xx:1812 length 186
(56)   User-Name = "oreshkin"
(56)   Framed-MTU = 1450
(56)   EAP-Message = 0x0201000d016f726573686b696e
(56)   Message-Authenticator = 0x7cbcab08900176179f29dcfba6367524
(56)   NAS-IP-Address = 192.168.14.247
(56)   NAS-Identifier = "3Com AP9552 Dual Band 802.11n"
(56)   NAS-Port = 16912385
(56)   NAS-Port-Type = Wireless-802.11
(56)   Service-Type = Framed-User
(56)   Framed-Protocol = PPP
(56)   Called-Station-Id = "40-01-C6-12-9A-50:HEPD-COMMON"
(56)   Framed-IP-Address = 10.2.0.118
(56) # Executing section authorize from file
/etc/raddb/sites-enabled/default
(56)   authorize {
(56)     policy filter_username {
(56)       if (&User-Name) {
(56)       if (&User-Name)  -> TRUE
(56)       if (&User-Name)  {
(56)         if (&User-Name =~ / /) {
(56)         if (&User-Name =~ / /)  -> FALSE
(56)         if (&User-Name =~ /@[^@]*@/ ) {
(56)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(56)         if (&User-Name =~ /\.\./ ) {
(56)         if (&User-Name =~ /\.\./ )  -> FALSE
(56)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(56)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(56)         if (&User-Name =~ /\.$/)  {
(56)         if (&User-Name =~ /\.$/)   -> FALSE
(56)         if (&User-Name =~ /@\./)  {
(56)         if (&User-Name =~ /@\./)   -> FALSE
(56)       } # if (&User-Name)  = notfound
(56)     } # policy filter_username = notfound
(56)     [preprocess] = ok
(56)     [chap] = noop
(56)     [mschap] = noop
(56) suffix: Checking for suffix after "@"
(56) suffix: No '@' in User-Name = "oreshkin", looking up realm NULL
(56) suffix: No such realm "NULL"
(56)     [suffix] = noop
(56) ntdomain: Checking for prefix before "\"
(56) ntdomain: No '\' in User-Name = "oreshkin", looking up realm NULL
(56) ntdomain: No such realm "NULL"
(56)     [ntdomain] = noop
(56) eap: Peer sent EAP Response (code 2) ID 1 length 13
(56) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the
rest of authorize
(56)     [eap] = ok
(56)   } # authorize = ok
(56) Found Auth-Type = eap
(56) # Executing group from file /etc/raddb/sites-enabled/default
(56)   authenticate {
(56) eap: Peer sent packet with method EAP Identity (1)
(56) eap: Calling submodule eap_peap to process data
(56) eap_peap: Initiating new EAP-TLS session
(56) eap_peap: [eaptls start] = request
(56) eap: Sending EAP Request (code 1) ID 2 length 6
(56) eap: EAP session adding &reply:State = 0x3d1519743d1700a3
(56)     [eap] = handled
(56)   } # authenticate = handled
(56) Using Post-Auth-Type Challenge
(56) # Executing group from file /etc/raddb/sites-enabled/default
(56)   Challenge { ... } # empty sub-section is ignored
(56) Sent Access-Challenge Id 78 from xx.xx.xx.xx:1812 to
192.168.14.247:1024 length 0
(56)   EAP-Message = 0x010200061920
(56)   Message-Authenticator = 0x00000000000000000000000000000000
(56)   State = 0x3d1519743d1700a3e8b8cc523e8178d3
(56) Finished request
Waking up in 4.9 seconds.
(57) Received Access-Request Id 79 from 192.168.14.247:1024 to
xx.xx.xx.xx:1812 length 357
(57)   User-Name = "oreshkin"
(57)   Framed-MTU = 1450
(57)   EAP-Message =
0x020200a619800000009c16030300970100009303035ed4e326024575b5f7657d7682eaede311614a375a55cd2f5f103f6234f22c1600002ac02cc02bc030c02f009f009ec024c023c028c027c00ac009c014c013009d009c003d003c0035002f000a01000040000500050100000000000a00080006001d
(57)   Message-Authenticator = 0x06f6d74039679bf38f0cd855bfd2e083
(57)   NAS-IP-Address = 192.168.14.247
(57)   NAS-Identifier = "3Com AP9552 Dual Band 802.11n"
(57)   NAS-Port = 16912385
(57)   NAS-Port-Type = Wireless-802.11
(57)   Service-Type = Framed-User
(57)   Framed-Protocol = PPP
(57)   Calling-Station-Id = "30-E3-7A-D5-61-F0"
(57)   Called-Station-Id = "40-01-C6-12-9A-50:HEPD-COMMON"
(57)   Framed-IP-Address = 10.2.0.118
(57)   State = 0x3d1519743d1700a3e8b8cc523e8178d3
(57) session-state: No cached attributes
(57) # Executing section authorize from file
/etc/raddb/sites-enabled/default
(57)   authorize {
(57)     policy filter_username {
(57)       if (&User-Name) {
(57)       if (&User-Name)  -> TRUE
(57)       if (&User-Name)  {
(57)         if (&User-Name =~ / /) {
(57)         if (&User-Name =~ / /)  -> FALSE
(57)         if (&User-Name =~ /@[^@]*@/ ) {
(57)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(57)         if (&User-Name =~ /\.\./ ) {
(57)         if (&User-Name =~ /\.\./ )  -> FALSE
(57)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(57)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(57)         if (&User-Name =~ /\.$/)  {
(57)         if (&User-Name =~ /\.$/)   -> FALSE
(57)         if (&User-Name =~ /@\./)  {
(57)         if (&User-Name =~ /@\./)   -> FALSE
(57)       } # if (&User-Name)  = notfound
(57)     } # policy filter_username = notfound
(57)     [preprocess] = ok
(57)     [chap] = noop
(57)     [mschap] = noop
(57) suffix: Checking for suffix after "@"
(57) suffix: No '@' in User-Name = "oreshkin", looking up realm NULL
(57) suffix: No such realm "NULL"
(57)     [suffix] = noop
(57) ntdomain: Checking for prefix before "\"
(57) ntdomain: No '\' in User-Name = "oreshkin", looking up realm NULL
(57) ntdomain: No such realm "NULL"
(57)     [ntdomain] = noop
(57) eap: Peer sent EAP Response (code 2) ID 2 length 166
(57) eap: Continuing tunnel setup
(57)     [eap] = ok
(57)   } # authorize = ok
(57) Found Auth-Type = eap
(57) # Executing group from file /etc/raddb/sites-enabled/default
(57)   authenticate {
(57) eap: Expiring EAP session with state 0x3d1519743d1700a3
(57) eap: Finished EAP session with state 0x3d1519743d1700a3
(57) eap: Previous EAP request found for state 0x3d1519743d1700a3, released
from the list
(57) eap: Peer sent packet with method EAP PEAP (25)
(57) eap: Calling submodule eap_peap to process data
(57) eap_peap: Continuing EAP-TLS
(57) eap_peap: Peer indicated complete TLS record size will be 156 bytes
(57) eap_peap: Got complete TLS record (156 bytes)
(57) eap_peap: [eaptls verify] = length included
(57) eap_peap: (other): before/accept initialization
(57) eap_peap: TLS_accept: before/accept initialization
(57) eap_peap: <<< recv TLS 1.2  [length 0097]
(57) eap_peap: TLS_accept: SSLv3 read client hello A
(57) eap_peap: >>> send TLS 1.2  [length 0039]
(57) eap_peap: TLS_accept: SSLv3 write server hello A
(57) eap_peap: >>> send TLS 1.2  [length 08d3]
(57) eap_peap: TLS_accept: SSLv3 write certificate A
(57) eap_peap: >>> send TLS 1.2  [length 014d]
(57) eap_peap: TLS_accept: SSLv3 write key exchange A
(57) eap_peap: >>> send TLS 1.2  [length 0004]
(57) eap_peap: TLS_accept: SSLv3 write server done A
(57) eap_peap: TLS_accept: SSLv3 flush data
(57) eap_peap: TLS_accept: SSLv3 read client certificate A
(57) eap_peap: TLS_accept: Need to read more data: SSLv3 read client key
exchange A
(57) eap_peap: TLS_accept: Need to read more data: SSLv3 read client key
exchange A
(57) eap_peap: In SSL Handshake Phase
(57) eap_peap: In SSL Accept mode
(57) eap_peap: [eaptls process] = handled
(57) eap: Sending EAP Request (code 1) ID 3 length 1004
(57) eap: EAP session adding &reply:State = 0x3d1519743c1600a3
(57)     [eap] = handled
(57)   } # authenticate = handled
(57) Using Post-Auth-Type Challenge
(57) # Executing group from file /etc/raddb/sites-enabled/default
(57)   Challenge { ... } # empty sub-section is ignored
(57) Sent Access-Challenge Id 79 from xx.xx.xx.xx:1812 to
192.168.14.247:1024 length 0
(57)   EAP-Message =
0x010303ec19c000000a7116030300390200003503035beaa86e445904d46f99b80f745ada22ce0d26c0dede6119489cfe4452d2b0a300c03000000dff01000100000b00040300010216030308d30b0008cf0008cc0003de308203da308202c2a003020102020101300d06092a864886f70d01010b050030
(57)   Message-Authenticator = 0x00000000000000000000000000000000
(57)   State = 0x3d1519743c1600a3e8b8cc523e8178d3
(57) Finished request
Waking up in 4.9 seconds.
(58) Received Access-Request Id 80 from 192.168.14.247:1024 to
xx.xx.xx.xx:1812 length 197
(58)   User-Name = "oreshkin"
(58)   Framed-MTU = 1450
(58)   EAP-Message = 0x020300061900
(58)   Message-Authenticator = 0x6145821a369fb8f2866dc4715978b0b2
(58)   NAS-IP-Address = 192.168.14.247
(58)   NAS-Identifier = "3Com AP9552 Dual Band 802.11n"
(58)   NAS-Port = 16912385
(58)   NAS-Port-Type = Wireless-802.11
(58)   Service-Type = Framed-User
(58)   Framed-Protocol = PPP
(58)   Calling-Station-Id = "30-E3-7A-D5-61-F0"
(58)   Called-Station-Id = "40-01-C6-12-9A-50:HEPD-COMMON"
(58)   Framed-IP-Address = 10.2.0.118
(58)   State = 0x3d1519743c1600a3e8b8cc523e8178d3
(58) session-state: No cached attributes
(58) # Executing section authorize from file
/etc/raddb/sites-enabled/default
(58)   authorize {
(58)     policy filter_username {
(58)       if (&User-Name) {
(58)       if (&User-Name)  -> TRUE
(58)       if (&User-Name)  {
(58)         if (&User-Name =~ / /) {
(58)         if (&User-Name =~ / /)  -> FALSE
(58)         if (&User-Name =~ /@[^@]*@/ ) {
(58)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(58)         if (&User-Name =~ /\.\./ ) {
(58)         if (&User-Name =~ /\.\./ )  -> FALSE
(58)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(58)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(58)         if (&User-Name =~ /\.$/)  {
(58)         if (&User-Name =~ /\.$/)   -> FALSE
(58)         if (&User-Name =~ /@\./)  {
(58)         if (&User-Name =~ /@\./)   -> FALSE
(58)       } # if (&User-Name)  = notfound
(58)     } # policy filter_username = notfound
(58)     [preprocess] = ok
(58)     [chap] = noop
(58)     [mschap] = noop
(58) suffix: Checking for suffix after "@"
(58) suffix: No '@' in User-Name = "oreshkin", looking up realm NULL
(58) suffix: No such realm "NULL"
(58)     [suffix] = noop
(58) ntdomain: Checking for prefix before "\"
(58) ntdomain: No '\' in User-Name = "oreshkin", looking up realm NULL
(58) ntdomain: No such realm "NULL"
(58)     [ntdomain] = noop
(58) eap: Peer sent EAP Response (code 2) ID 3 length 6
(58) eap: Continuing tunnel setup
(58)     [eap] = ok
(58)   } # authorize = ok
(58) Found Auth-Type = eap
(58) # Executing group from file /etc/raddb/sites-enabled/default
(58)   authenticate {
(58) eap: Expiring EAP session with state 0x3d1519743c1600a3
(58) eap: Finished EAP session with state 0x3d1519743c1600a3
(58) eap: Previous EAP request found for state 0x3d1519743c1600a3, released
from the list
(58) eap: Peer sent packet with method EAP PEAP (25)
(58) eap: Calling submodule eap_peap to process data
(58) eap_peap: Continuing EAP-TLS
(58) eap_peap: Peer ACKed our handshake fragment
(58) eap_peap: [eaptls verify] = request
(58) eap_peap: [eaptls process] = handled
(58) eap: Sending EAP Request (code 1) ID 4 length 1000
(58) eap: EAP session adding &reply:State = 0x3d1519743f1100a3
(58)     [eap] = handled
(58)   } # authenticate = handled
(58) Using Post-Auth-Type Challenge
(58) # Executing group from file /etc/raddb/sites-enabled/default
(58)   Challenge { ... } # empty sub-section is ignored
(58) Sent Access-Challenge Id 80 from xx.xx.xx.xx:1812 to
192.168.14.247:1024 length 0
(58)   EAP-Message =
0x010403e81940f380d8c5155b8eb1fb79d0094a95a1908aa3d079dcf2dab14e3c12a2ab5494
d1c2430b1e8c6de4b03899f1315c96304f66bb40bd632d817172ece81732a4256ffbf9df90317051de700004e8308204e4308203cca003020102020900d5c6e8bb4ac2077e300d06092a864886f70d01010b
(58)   Message-Authenticator = 0x00000000000000000000000000000000
(58)   State = 0x3d1519743f1100a3e8b8cc523e8178d3
(58) Finished request
Waking up in 4.9 seconds.
(59) Received Access-Request Id 81 from 192.168.14.247:1024 to
xx.xx.xx.xx:1812 length 197
(59)   User-Name = "oreshkin"
(59)   Framed-MTU = 1450
(59)   EAP-Message = 0x020400061900
(59)   Message-Authenticator = 0x2ce77fed67c4ae1581b0d25e1445d267
(59)   NAS-IP-Address = 192.168.14.247
(59)   NAS-Identifier = "3Com AP9552 Dual Band 802.11n"
(59)   NAS-Port = 16912385
(59)   NAS-Port-Type = Wireless-802.11
(59)   Service-Type = Framed-User
(59)   Framed-Protocol = PPP
(59)   Calling-Station-Id = "30-E3-7A-D5-61-F0"
(59)   Called-Station-Id = "40-01-C6-12-9A-50:HEPD-COMMON"
(59)   Framed-IP-Address = 10.2.0.118
(59)   State = 0x3d1519743f1100a3e8b8cc523e8178d3
(59) session-state: No cached attributes
(59) # Executing section authorize from file
/etc/raddb/sites-enabled/default
(59)   authorize {
(59)     policy filter_username {
(59)       if (&User-Name) {
(59)       if (&User-Name)  -> TRUE
(59)       if (&User-Name)  {
(59)         if (&User-Name =~ / /) {
(59)         if (&User-Name =~ / /)  -> FALSE
(59)         if (&User-Name =~ /@[^@]*@/ ) {
(59)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(59)         if (&User-Name =~ /\.\./ ) {
(59)         if (&User-Name =~ /\.\./ )  -> FALSE
(59)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(59)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(59)         if (&User-Name =~ /\.$/)  {
(59)         if (&User-Name =~ /\.$/)   -> FALSE
(59)         if (&User-Name =~ /@\./)  {
(59)         if (&User-Name =~ /@\./)   -> FALSE
(59)       } # if (&User-Name)  = notfound
(59)     } # policy filter_username = notfound
(59)     [preprocess] = ok
(59)     [chap] = noop
(59)     [mschap] = noop
(59) suffix: Checking for suffix after "@"
(59) suffix: No '@' in User-Name = "oreshkin", looking up realm NULL
(59) suffix: No such realm "NULL"
(59)     [suffix] = noop
(59) ntdomain: Checking for prefix before "\"
(59) ntdomain: No '\' in User-Name = "oreshkin", looking up realm NULL
(59) ntdomain: No such realm "NULL"
(59)     [ntdomain] = noop
(59) eap: Peer sent EAP Response (code 2) ID 4 length 6
(59) eap: Continuing tunnel setup
(59)     [eap] = ok
(59)   } # authorize = ok
(59) Found Auth-Type = eap
(59) # Executing group from file /etc/raddb/sites-enabled/default
(59)   authenticate {
(59) eap: Expiring EAP session with state 0x3d1519743f1100a3
(59) eap: Finished EAP session with state 0x3d1519743f1100a3
(59) eap: Previous EAP request found for state 0x3d1519743f1100a3, released
from the list
(59) eap: Peer sent packet with method EAP PEAP (25)
(59) eap: Calling submodule eap_peap to process data
(59) eap_peap: Continuing EAP-TLS
(59) eap_peap: Peer ACKed our handshake fragment
(59) eap_peap: [eaptls verify] = request
(59) eap_peap: [eaptls process] = handled
(59) eap: Sending EAP Request (code 1) ID 5 length 691
(59) eap: EAP session adding &reply:State = 0x3d1519743e1000a3
(59)     [eap] = handled
(59)   } # authenticate = handled
(59) Using Post-Auth-Type Challenge
(59) # Executing group from file /etc/raddb/sites-enabled/default
(59)   Challenge { ... } # empty sub-section is ignored
(59) Sent Access-Challenge Id 81 from xx.xx.xx.xx:1812 to
192.168.14.247:1024 length 0
(59)   EAP-Message =
0x010502b319000530030101ff30360603551d1f042f302d302ba029a0278625687474703a2f2f7777772e6578616d706c652e6f72672f6578616d706c655f63612e63726c300d06092a864886f70d01010b050003820101007f15d37224ffa7b8db1d8ed23f49758db260c870aeedbcb0b706dfda4b208f
(59)   Message-Authenticator = 0x00000000000000000000000000000000
(59)   State = 0x3d1519743e1000a3e8b8cc523e8178d3
(59) Finished request
Waking up in 4.9 seconds.
(60) Received Access-Request Id 82 from 192.168.14.247:1024 to
xx.xx.xx.xx:1812 length 327
(60)   User-Name = "oreshkin"
(60)   Framed-MTU = 1450
(60)   EAP-Message =
0x0205008819800000007e1603030046100000424104f08ac61e32eea24000efa0a488eda5adc7a1ea9bcf5a8b6230b50ae0a1280df31ed3140efaaf33b2839bf5d30ed4f38c9241b5e4e5aa178bdff8b6f55019213b1403030001011603030028000000000000000097acd41c9881c9945775f7d91abaac
(60)   Message-Authenticator = 0x98d42f4e131a1c1bc42ef74aca121de5
(60)   NAS-IP-Address = 192.168.14.247
(60)   NAS-Identifier = "3Com AP9552 Dual Band 802.11n"
(60)   NAS-Port = 16912385
(60)   NAS-Port-Type = Wireless-802.11
(60)   Service-Type = Framed-User
(60)   Framed-Protocol = PPP
(60)   Calling-Station-Id = "30-E3-7A-D5-61-F0"
(60)   Called-Station-Id = "40-01-C6-12-9A-50:HEPD-COMMON"
(60)   Framed-IP-Address = 10.2.0.118
(60)   State = 0x3d1519743e1000a3e8b8cc523e8178d3
(60) session-state: No cached attributes
(60) # Executing section authorize from file
/etc/raddb/sites-enabled/default
(60)   authorize {
(60)     policy filter_username {
(60)       if (&User-Name) {
(60)       if (&User-Name)  -> TRUE
(60)       if (&User-Name)  {
(60)         if (&User-Name =~ / /) {
(60)         if (&User-Name =~ / /)  -> FALSE
(60)         if (&User-Name =~ /@[^@]*@/ ) {
(60)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(60)         if (&User-Name =~ /\.\./ ) {
(60)         if (&User-Name =~ /\.\./ )  -> FALSE
(60)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(60)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(60)         if (&User-Name =~ /\.$/)  {
(60)         if (&User-Name =~ /\.$/)   -> FALSE
(60)         if (&User-Name =~ /@\./)  {
(60)         if (&User-Name =~ /@\./)   -> FALSE
(60)       } # if (&User-Name)  = notfound
(60)     } # policy filter_username = notfound
(60)     [preprocess] = ok
(60)     [chap] = noop
(60)     [mschap] = noop
(60) suffix: Checking for suffix after "@"
(60) suffix: No '@' in User-Name = "oreshkin", looking up realm NULL
(60) suffix: No such realm "NULL"
(60)     [suffix] = noop
(60) ntdomain: Checking for prefix before "\"
(60) ntdomain: No '\' in User-Name = "oreshkin", looking up realm NULL
(60) ntdomain: No such realm "NULL"
(60)     [ntdomain] = noop
(60) eap: Peer sent EAP Response (code 2) ID 5 length 136
(60) eap: Continuing tunnel setup
(60)     [eap] = ok
(60)   } # authorize = ok(61)   Framed-IP-Address = 10.2.0.118
(61)   State = 0x3d151974391300a3e8b8cc523e8178d3
(61) session-state: No cached attributes
(61) # Executing section authorize from file
/etc/raddb/sites-enabled/default
(61)   authorize {
(61)     policy filter_username {
(61)       if (&User-Name) {
(61)       if (&User-Name)  -> TRUE
(61)       if (&User-Name)  {
(61)         if (&User-Name =~ / /) {
(61)         if (&User-Name =~ / /)  -> FALSE
(61)         if (&User-Name =~ /@[^@]*@/ ) {
(61)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(61)         if (&User-Name =~ /\.\./ ) {
(61)         if (&User-Name =~ /\.\./ )  -> FALSE
(61)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(61)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(61)         if (&User-Name =~ /\.$/)  {
(61)         if (&User-Name =~ /\.$/)   -> FALSE
(61)         if (&User-Name =~ /@\./)  {
(61)         if (&User-Name =~ /@\./)   -> FALSE
(61)       } # if (&User-Name)  = notfound
(61)     } # policy filter_username = notfound
(61)     [preprocess] = ok
(61)     [chap] = noop
(61)     [mschap] = noop
(61) suffix: Checking for suffix after "@"
(61) suffix: No '@' in User-Name = "oreshkin", looking up realm NULL
(61) suffix: No such realm "NULL"
(61)     [suffix] = noop
(61) ntdomain: Checking for prefix before "\"
(61) ntdomain: No '\' in User-Name = "oreshkin", looking up realm NULL
(61) ntdomain: No such realm "NULL"
(61)     [ntdomain] = noop
(61) eap: Peer sent EAP Response (code 2) ID 6 length 6
(61) eap: Continuing tunnel setup
(61)     [eap] = ok
(61)   } # authorize = ok

(60) Found Auth-Type = eap
(60) # Executing group from file /etc/raddb/sites-enabled/default
(60)   authenticate {
(60) eap: Expiring EAP session with state 0x3d1519743e1000a3
(60) eap: Finished EAP session with state 0x3d1519743e1000a3
(60) eap: Previous EAP request found for state 0x3d1519743e1000a3, released
from the list
(60) eap: Peer sent packet with method EAP PEAP (25)
(60) eap: Calling submodule eap_peap to process data
(60) eap_peap: Continuing EAP-TLS
(60) eap_peap: Peer indicated complete TLS record size will be 126 bytes
(60) eap_peap: Got complete TLS record (126 bytes)
(60) eap_peap: [eaptls verify] = length included
(60) eap_peap: <<< recv TLS 1.2  [length 0046]
(60) eap_peap: TLS_accept: SSLv3 read client key exchange A
(60) eap_peap: TLS_accept: SSLv3 read certificate verify A
(60) eap_peap: <<< recv TLS 1.2  [length 0001]
(60) eap_peap: <<< recv TLS 1.2  [length 0010]
(60) eap_peap: TLS_accept: SSLv3 read finished A
(60) eap_peap: >>> send TLS 1.2  [length 0001]
(60) eap_peap: TLS_accept: SSLv3 write change cipher spec A
(60) eap_peap: >>> send TLS 1.2  [length 0010]
(60) eap_peap: TLS_accept: SSLv3 write finished A
(60) eap_peap: TLS_accept: SSLv3 flush data
(60) eap_peap: (other): SSL negotiation finished successfully
(60) eap_peap: SSL Connection Established
(60) eap_peap: [eaptls process] = handled
(60) eap: Sending EAP Request (code 1) ID 6 length 57
(60) eap: EAP session adding &reply:State = 0x3d151974391300a3
(60)     [eap] = handled
(60)   } # authenticate = handled
(60) Using Post-Auth-Type Challenge
(60) # Executing group from file /etc/raddb/sites-enabled/default
(60)   Challenge { ... } # empty sub-section is ignored
(60) Sent Access-Challenge Id 82 from xx.xx.xx.xx:1812 to
192.168.14.247:1024 length 0
(60)   EAP-Message =
0x0106003919001403030001011603030028997adf21b5a322da8b0b5a4e195459ed1f8b4525aa8656aa97533d11756d8b0d0f19c2ed93803940
(60)   Message-Authenticator = 0x00000000000000000000000000000000
(60)   State = 0x3d151974391300a3e8b8cc523e8178d3
(60) Finished request
Waking up in 4.9 seconds.
(61) Received Access-Request Id 83 from 192.168.14.247:1024 to
xx.xx.xx.xx:1812 length 197
(61)   User-Name = "oreshkin"
(61)   Framed-MTU = 1450
(61)   EAP-Message = 0x020600061900
(61)   Message-Authenticator = 0x612a19c5fed77f1693fcdbc3857b8f68
(61)   NAS-IP-Address = 192.168.14.247
(61)   NAS-Identifier = "3Com AP9552 Dual Band 802.11n"
(61)   NAS-Port = 16912385
(61)   NAS-Port-Type = Wireless-802.11
(61)   Service-Type = Framed-User
(61)   Framed-Protocol = PPP
(61)   Calling-Station-Id = "30-E3-7A-D5-61-F0"
(61)   Called-Station-Id = "40-01-C6-12-9A-50:HEPD-COMMON"
(61)   Framed-IP-Address = 10.2.0.118
(61)   State = 0x3d151974391300a3e8b8cc523e8178d3
(61) session-state: No cached attributes
(61) # Executing section authorize from file
/etc/raddb/sites-enabled/default
(61)   authorize {
(61)     policy filter_username {
(61)       if (&User-Name) {
(61)       if (&User-Name)  -> TRUE
(61)       if (&User-Name)  {
(61)         if (&User-Name =~ / /) {
(61)         if (&User-Name =~ / /)  -> FALSE
(61)         if (&User-Name =~ /@[^@]*@/ ) {
(61)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(61)         if (&User-Name =~ /\.\./ ) {
(61)         if (&User-Name =~ /\.\./ )  -> FALSE
(61)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(61)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(61)         if (&User-Name =~ /\.$/)  {
(61)         if (&User-Name =~ /\.$/)   -> FALSE
(61)         if (&User-Name =~ /@\./)  {
(61)         if (&User-Name =~ /@\./)   -> FALSE
(61)       } # if (&User-Name)  = notfound
(61)     } # policy filter_username = notfound
(61)     [preprocess] = ok
(61)     [chap] = noop
(61)     [mschap] = noop
(61) suffix: Checking for suffix after "@"
(61) suffix: No '@' in User-Name = "oreshkin", looking up realm NULL
(61) suffix: No such realm "NULL"
(61)     [suffix] = noop
(61) ntdomain: Checking for prefix before "\"
(61) ntdomain: No '\' in User-Name = "oreshkin", looking up realm NULL
(61) ntdomain: No such realm "NULL"
(61)     [ntdomain] = noop
(61) eap: Peer sent EAP Response (code 2) ID 6 length 6
(61) eap: Continuing tunnel setup
(61)     [eap] = ok
(61)   } # authorize = ok
(61) Found Auth-Type = eap
(61) # Executing group from file /etc/raddb/sites-enabled/default
(61)   authenticate {
(61) eap: Expiring EAP session with state 0x3d151974391300a3
(61) eap: Finished EAP session with state 0x3d151974391300a3
(61) eap: Previous EAP request found for state 0x3d151974391300a3, released
from the list
(61) eap: Peer sent packet with method EAP PEAP (25)
(61) eap: Calling submodule eap_peap to process data
(61) eap_peap: Continuing EAP-TLS
(61) eap_peap: Peer ACKed our handshake fragment.  handshake is finished
(61) eap_peap: [eaptls verify] = success
(61) eap_peap: [eaptls process] = success
(61) eap_peap: Session established.  Decoding tunneled attributes
(61) eap_peap: PEAP state TUNNEL ESTABLISHED
(61) eap: Sending EAP Request (code 1) ID 7 length 40
(61) eap: EAP session adding &reply:State = 0x3d151974381200a3
(61)     [eap] = handled
(61)   } # authenticate = handled
(61) Using Post-Auth-Type Challenge
(61) # Executing group from file /etc/raddb/sites-enabled/default
(61)   Challenge { ... } # empty sub-section is ignored
(61) Sent Access-Challenge Id 83 from xx.xx.xx.xx:1812 to
192.168.14.247:1024 length 0
(61)   EAP-Message =
0x010700281900170303001d997adf21b5a322dbf91229eb191f00a968b5fb9dc729dca9f16bd2443c
(61)   Message-Authenticator = 0x00000000000000000000000000000000
(61)   State = 0x3d151974381200a3e8b8cc523e8178d3
(61) Finished request
Waking up in 4.9 seconds.
(62) Received Access-Request Id 84 from 192.168.14.247:1024 to
xx.xx.xx.xx:1812 length 235
(62)   User-Name = "oreshkin"
(62)   Framed-MTU = 1450
(62)   EAP-Message =
0x0207002c190017030300210000000000000001d8f82029d559c295475829493afb7b9212a45f69dd31bfa7c0
(62)   Message-Authenticator = 0xe5a810e7709c0829d8273b774dec8860
(62)   NAS-IP-Address = 192.168.14.247
(62)   NAS-Identifier = "3Com AP9552 Dual Band 802.11n"
(62)   NAS-Port = 16912385
(62)   NAS-Port-Type = Wi(62)   Service-Type = Framed-User
(62)   Framed-Protocol = PPP
(62)   Calling-Station-Id = "30-E3-7A-D5-61-F0"
(62)   Called-Station-Id = "40-01-C6-12-9A-50:HEPD-COMMON"
(62)   Framed-IP-Address = 10.2.0.118
(62)   State = 0x3d151974381200a3e8b8cc523e8178d3
(62) session-state: No cached attributes
(62) # Executing section authorize from file
/etc/raddb/sites-enabled/default
(62)   authorize {
(62)     policy filter_username {
(62)       if (&User-Name) {
(62)       if (&User-Name)  -> TRUE
(62)       if (&User-Name)  {
(62)         if (&User-Name =~ / /) {
(62)         if (&User-Name =~ / /)  -> FALSE
(62)         if (&User-Name =~ /@[^@]*@/ ) {
(62)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(62)         if (&User-Name =~ /\.\./ ) {
(62)         if (&User-Name =~ /\.\./ )  -> FALSE
(62)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(62)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(62)         if (&User-Name =~ /\.$/)  {
(62)         if (&User-Name =~ /\.$/)   -> FALSE
(62)         if (&User-Name =~ /@\./)  {
(62)         if (&User-Name =~ /@\./)   -> FALSE
(62)       } # if (&User-Name)  = notfound
(62)     } # policy filter_username = notfound
(62)     [preprocess] = ok
(62)     [chap] = noop
(62)     [mschap] = noop
(62) suffix: Checking for suffix after "@"
(62) suffix: No '@' in User-Name = "oreshkin", looking up realm NULL
(62) suffix: No such realm "NULL"
(62)     [suffix] = noop
(62) ntdomain: Checking for prefix before "\"
(62) ntdomain: No '\' in User-Name = "oreshkin", looking up realm NULL
(62) ntdomain: No such realm "NULL"
(62)     [ntdomain] = noop
(62) eap: Peer sent EAP Response (code 2) ID 7 length 44
(62) eap: Continuing tunnel setup
(62)     [eap] = ok
(62)   } # authorize = ok
(62) Found Auth-Type = eap
(62) # Executing group from file /etc/raddb/sites-enabled/default
(62)   authenticate {
(62) eap: Expiring EAP session with state 0x3d151974381200a3
(62) eap: Finished EAP session with state 0x3d151974381200a3
(62) eap: Previous EAP request found for state 0x3d151974381200a3, released
from the list
(62) eap: Peer sent packet with method EAP PEAP (25)
(62) eap: Calling submodule eap_peap to process data
(62) eap_peap: Continuing EAP-TLS
(62) eap_peap: [eaptls verify] = ok
(62) eap_peap: Done initial handshake
(62) eap_peap: [eaptls process] = ok
(62) eap_peap: Session established.  Decoding tunneled attributes
(62) eap_peap: PEAP state WAITING FOR INNER IDENTITY
(62) eap_peap: Identity - oreshkin
(62) eap_peap: Got inner identity 'oreshkin'
(62) eap_peap: Setting default EAP type for tunneled EAP session
(62) eap_peap: Got tunneled request
(62) eap_peap:   EAP-Message = 0x0207000d016f726573686b696e
(62) eap_peap: Setting User-Name to oreshkin
(62) eap_peap: Sending tunneled request to inner-tunnel
(62) eap_peap:   EAP-Message = 0x0207000d016f726573686b696e
(62) eap_peap:   FreeRADIUS-Proxied-To = 127.0.0.1
(62) eap_peap:   User-Name = "oreshkin"
(62) eap_peap:   Framed-MTU = 1450
(62) eap_peap:   NAS-IP-Address = 192.168.14.247
(62) eap_peap:   NAS-Identifier = "3Com AP9552 Dual Band 802.11n"
(62) eap_peap:   NAS-Port = 16912385
(62) eap_peap:   NAS-Port-Type = Wireless-802.11
(62) eap_peap:   Service-Type = Framed-User
(62) eap_peap:   Framed-Protocol = PPP
(62) eap_peap:   Calling-Station-Id = "30-E3-7A-D5-61-F0"
(62) eap_peap:   Called-Station-Id = "40-01-C6-12-9A-50:HEPD-COMMON"
(62) eap_peap:   Framed-IP-Address = 10.2.0.118
....
(72) eap: Expiring EAP session with state 0x34bd73d634b56993
(72) eap: Finished EAP session with state 0x34bd73d634b56993
(72) eap: Previous EAP request found for state 0x34bd73d634b56993, released
from the list
(72) eap: Peer sent packet with method EAP MSCHAPv2 (26)
(72) eap: Calling submodule eap_mschapv2 to process data
(72) eap_mschapv2: # Executing group from file
/etc/raddb/sites-enabled/inner-tunnel
(72) eap_mschapv2:   authenticate {
(72) mschap: WARNING: No Cleartext-Password configured.  Cannot create
NT-Password
(72) mschap: WARNING: No Cleartext-Password configured.  Cannot create
LM-Password
(72) mschap: Creating challenge hash with username: oreshkin
(72) mschap: Client is using MS-CHAPv2
(72) mschap: ERROR: FAILED: No NT/LM-Password.  Cannot perform
authentication
(72) mschap: ERROR: MS-CHAP2-Response is incorrect
(72)     [mschap] = reject
(72)   } # authenticate = reject
(72) eap: Sending EAP Failure (code 4) ID 8 length 4
(72) eap: Freeing handler
(72)       [eap] = reject
(72)     } # authenticate = reject
(72)   Failed to authenticate the user
(72)   Login incorrect (mschap: FAILED: No NT/LM-Password.  Cannot perform
authentication): [ores
hkin] (from client 3com9552 port 16912385 cli 30-E3-7A-D5-61-F0 via TLS
tunnel)
(72)   Using Post-Auth-Type Reject
(72)   # Executing group from file /etc/raddb/sites-enabled/inner-tunnel
(72)     Post-Auth-Type REJECT {
(72)       update outer.session-state {
(72)         &Module-Failure-Message := &request:Module-Failure-Message ->
'mschap: FAILED: No NT
/LM-Password.  Cannot perform authentication'
(72)       } # update outer.session-state = noop
(72)     } # Post-Auth-Type REJECT = noop
(72) } # server inner-tunnel
(72) Virtual server sending reply
(72)   Framed-Protocol = PPP
(72)   Framed-Compression = Van-Jacobson-TCP-IP
(72)   MS-CHAP-Error = "\010E=691 R=1 C=2aadf661100584402f8bb93462af5d53
V=3 M=Authentication failed"
(72)   EAP-Message = 0x04080004
(72)   Message-Authenticator = 0x00000000000000000000000000000000
(72) eap_peap: Got tunneled reply code 3
(72) eap_peap:   Framed-Protocol = PPP
(72) eap_peap:   Framed-Compression = Van-Jacobson-TCP-IP
(72) eap_peap:   MS-CHAP-Error = "\010E=691 R=1
C=2aadf661100584402f8bb93462af5d53 V=3 M=Authentication failed"
(72) eap_peap:   EAP-Message = 0x04080004
(72) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000
(72) eap_peap: Got tunneled reply RADIUS code 3
(72) eap_peap:   Framed-Protocol = PPP
(72) eap_peap:   Framed-Compression = Van-Jacobson-TCP-IP
(72) eap_peap:   MS-CHAP-Error = "\010E=691 R=1
C=2aadf661100584402f8bb93462af5d53 V=3 M=Authentication failed"
(72) eap_peap:   EAP-Message = 0x04080004
(72) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000
(72) eap_peap: Tunneled authentication was rejected
(72) eap_peap: FAILURE
(72) eap: Sending EAP Request (code 1) ID 9 length 46
(72) eap: EAP session adding &reply:State = 0xe46f1db3e366046e
(72)     [eap] = handled
(72)   } # authenticate = handled
(72) Using Post-Auth-Type Challenge
(72) # Executing group from file /etc/raddb/sites-enabled/default
(72)   Challenge { ... } # empty sub-section is ignored
(72) session-state: Saving cached attributes
(72)   Module-Failure-Message := "mschap: FAILED: No NT/LM-Password.
Cannot perform authentication"
(72) Sent Access-Challenge Id 94 from xx.xx.xx.xx:1812 to
192.168.14.247:1024 length 0
(72)   EAP-Message =
0x0109002e190017030300232f1c04ca542acfe094941bb20f03a5498700ed1375fd28eec62833f28ad725fdd3f9f5
(72)   Message-Authenticator = 0x00000000000000000000000000000000
(72)   State = 0xe46f1db3e366046e2153a66971fb5083
(72) Finished request
(73) Received Access-Request Id 95 from 192.168.14.247:1024 to
xx.xx.xx.xx:1812 length 237
(73)   User-Name = "oreshkin"
(73)   Framed-MTU = 1450
(73)   EAP-Message =
0x0209002e190017030300230000000000000003f7e3c43cc90506a28d17008623f68c26d168402c735168f2b37c1e
(73)   Message-Authenticator = 0x8c9a4128ba7bd82bf5fc6ac461bd3560
(73)   NAS-IP-Address = 192.168.14.247
(73)   NAS-Identifier = "3Com AP9552 Dual Band 802.11n"
(73)   NAS-Port = 16912385
(73)   NAS-Port-Type = Wireless-802.11
(73)   Service-Type = Framed-User
(73)   Framed-Protocol = PPP
(73)   Calling-Station-Id = "30-E3-7A-D5-61-F0"
(73)   Called-Station-Id = "40-01-C6-12-9A-50:HEPD-COMMON"
(73)   Framed-IP-Address = 10.2.0.118
(73)   State = 0xe46f1db3e366046e2153a66971fb5083
(73) Restoring &session-state
(73)   &session-state:Module-Failure-Message := "mschap: FAILED: No
NT/LM-Password.  Cannot perform authentication"
(73) # Executing section authorize from file
/etc/raddb/sites-enabled/default
(73)   authorize {
(73)     policy filter_username {
(73)       if (&User-Name) {
(73)       if (&User-Name)  -> TRUE
(73)       if (&User-Name)  {
(73)         if (&User-Name =~ / /) {
(73)         if (&User-Name =~ / /)  -> FALSE
(73)         if (&User-Name =~ /@[^@]*@/ ) {
(73)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(73)         if (&User-Name =~ /\.\./ ) {
(73)         if (&User-Name =~ /\.\./ )  -> FALSE
(73)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(73)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(73)         if (&User-Name =~ /\.$/)  {
(73)         if (&User-Name =~ /\.$/)   -> FALSE
(73)         if (&User-Name =~ /@\./)  {
(73)         if (&User-Name =~ /@\./)   -> FALSE
(73)       } # if (&User-Name)  = notfound
(73)     } # policy filter_username = notfound
(73)     [preprocess] = ok
(73)     [chap] = noop
(73)     [mschap] = noop
(73) suffix: Checking for suffix after "@"
(73) suffix: No '@' in User-Name = "oreshkin", looking up realm NULL
(73) suffix: No such realm "NULL"
(73)     [suffix] = noop
(73) ntdomain: Checking for prefix before "\"
(73) ntdomain: No '\' in User-Name = "oreshkin", looking up realm NULL
(73) ntdomain: No such realm "NULL"
(73)     [ntdomain] = noop
(73) eap: Peer sent EAP Response (code 2) ID 9 length 46
(73) eap: Continuing tunnel setup
(73)     [eap] = ok
(73)   } # authorize = ok
(73) Found Auth-Type = eap
(73) # Executing group from file /etc/raddb/sites-enabled/default
(73)   authenticate {
(73) eap: Expiring EAP session with state 0xe46f1db3e366046e
(73) eap: Finished EAP session with state 0xe46f1db3e366046e
(73) eap: Previous EAP request found for state 0xe46f1db3e366046e, released
from the list
(73) eap: Peer sent packet with method EAP PEAP (25)
(73) eap: Calling submodule eap_peap to process data
(73) eap_peap: Continuing EAP-TLS
(73) eap_peap: [eaptls verify] = ok
(73) eap_peap: Done initial handshake
(73) eap_peap: [eaptls process] = ok
(73) eap_peap: Session established.  Decoding tunneled attributes
(73) eap_peap: PEAP state send tlv failure
(73) eap_peap: Received EAP-TLV response
(73) eap_peap:   ERROR: The users session was previously rejected:
returning reject (again.)
(73) eap_peap:   This means you need to read the PREVIOUS messages in the
debug output
(73) eap_peap:   to find out the reason why the user was rejected
(73) eap_peap:   Look for "reject" or "fail".  Those earlier messages will
tell you
(73) eap_peap:   what went wrong, and how to fix the problem
(73) eap: ERROR: Failed continuing EAP PEAP (25) session.  EAP sub-module
failed
(73) eap: Sending EAP Failure (code 4) ID 9 length 4
(73) eap: Failed in EAP select
(73)     [eap] = invalid
(73)   } # authenticate = invalid
(73) Failed to authenticate the user
(73) Login incorrect (eap_peap: The users session was previously rejected:
returning reject (again.)): [oreshkin] (from client 3com9552 port 16912385
cli 30-E3-7A-D5-61-F0)
(73) Using Post-Auth-Type Reject
(73) # Executing group from file /etc/raddb/sites-enabled/default
(73)   Post-Auth-Type REJECT {
(73) attr_filter.access_reject: EXPAND %{User-Name}
(73) attr_filter.access_reject:    --> oreshkin
(73) attr_filter.access_reject: Matched entry DEFAULT at line 11
(73)     [attr_filter.access_reject] = updated
(73)     [eap] = noop
(73)     policy remove_reply_message_if_eap {
(73)       if (&reply:EAP-Message && &reply:Reply-Message) {
(73)       if (&reply:EAP-Message && &reply:Reply-Message)  -> FALSE
(73)       else {
(73)         [noop] = noop
(73)       } # else = noop
(73)     } # policy remove_reply_message_if_eap = noop
(73)   } # Post-Auth-Type REJECT = updated
(73) Delaying response for 1.000000 seconds
(61) Cleaning up request packet ID 83 with timestamp +239
(62) Cleaning up request packet ID 84 with timestamp +239
(63) Cleaning up request packet ID 85 with timestamp +239
(64) Cleaning up request packet ID 86 with timestamp +239
Waking up in 0.3 seconds.
Waking up in 0.6 seconds.

.....

Radius 3 EAP (PEAP) mschapv2 connection problem

Anatoly Oreshkin