Mac client fails to authenticate after upgrade from 3.0.16 to 3.0.26

7 Feb 2024

      Hello All,

I migrated my FreeRadius setup to new server and since then I'm not able to authenticate from macos or ios.
I even compared all config files one by and adjusted it to be exact as on old server but it didn't change anything so I reverted to installation defaults.
Both FreeRadius instances are talking to the same ldap server and on old one I'm able to authenticate and on new one I'm not.
I'm pretty stuck here and I'm asking for help since I'm not experienced enough and I'm out of any other options.
Maybe someone will be able to help?

Old server debug log:

● freeradius.service - FreeRADIUS multi-protocol policy server
   Loaded: loaded (/lib/systemd/system/freeradius.service; enabled; vendor preset: enabled)
   Active: inactive (dead) since Wed 2024-02-07 14:26:08 CET; 1s ago
     Docs: man:radiusd(8)
           man:radiusd.conf(5)
           http://wiki.freeradius.org/
           http://networkradius.com/doc/
  Process: 13066 ExecStart=/usr/sbin/freeradius $FREERADIUS_OPTIONS (code=exited, status=0/SUCCESS)
  Process: 13064 ExecStartPre=/usr/sbin/freeradius $FREERADIUS_OPTIONS -Cxm -lstdout (code=exited, status=0/SUCCESS)
 Main PID: 13068 (code=exited, status=0/SUCCESS)

Feb 07 14:25:49 ldap-prod freeradius[13064]: rlm_ldap: libldap vendor: OpenLDAP, version: 20445
Feb 07 14:25:49 ldap-prod freeradius[13064]: rlm_ldap (ldap): Initialising connection pool
Feb 07 14:25:49 ldap-prod freeradius[13064]: Ignoring "sql" (see raddb/mods-available/README.rst)
Feb 07 14:25:49 ldap-prod freeradius[13064]:  # Skipping contents of 'if' as it is always 'false' -- /etc/freeradius/3.0/sites-enabled/inner-tunnel:349
Feb 07 14:25:49 ldap-prod freeradius[13064]: radiusd: #### Skipping IP addresses and Ports ####
Feb 07 14:25:49 ldap-prod freeradius[13064]: Configuration appears to be OK
Feb 07 14:25:49 ldap-prod freeradius[13064]: rlm_ldap (ldap): Removing connection pool
Feb 07 14:25:49 ldap-prod systemd[1]: Started FreeRADIUS multi-protocol policy server.
Feb 07 14:26:08 ldap-prod systemd[1]: Stopping FreeRADIUS multi-protocol policy server...
Feb 07 14:26:08 ldap-prod systemd[1]: Stopped FreeRADIUS multi-protocol policy server.
FreeRADIUS Version 3.0.16
Copyright (C) 1999-2017 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/freeradius/3.0/dictionary
including configuration file /etc/freeradius/3.0/radiusd.conf
including configuration file /etc/freeradius/3.0/proxy.conf
including configuration file /etc/freeradius/3.0/clients.conf
including files in directory /etc/freeradius/3.0/mods-enabled/
including configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clients
including configuration file /etc/freeradius/3.0/mods-enabled/chap
including configuration file /etc/freeradius/3.0/mods-enabled/eap
including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp
including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter
including configuration file /etc/freeradius/3.0/mods-enabled/files
including configuration file /etc/freeradius/3.0/mods-enabled/expiration
including configuration file /etc/freeradius/3.0/mods-enabled/unix
including configuration file /etc/freeradius/3.0/mods-enabled/preprocess
including configuration file /etc/freeradius/3.0/mods-enabled/echo
including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth
including configuration file /etc/freeradius/3.0/mods-enabled/exec
including configuration file /etc/freeradius/3.0/mods-enabled/utf8
including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap
including configuration file /etc/freeradius/3.0/mods-enabled/passwd
including configuration file /etc/freeradius/3.0/mods-enabled/expr
including configuration file /etc/freeradius/3.0/mods-enabled/logintime
including configuration file /etc/freeradius/3.0/mods-enabled/detail
including configuration file /etc/freeradius/3.0/mods-enabled/unpack
including configuration file /etc/freeradius/3.0/mods-enabled/detail.log
including configuration file /etc/freeradius/3.0/mods-enabled/always
including configuration file /etc/freeradius/3.0/mods-enabled/soh
including configuration file /etc/freeradius/3.0/mods-enabled/realm
including configuration file /etc/freeradius/3.0/mods-enabled/radutmp
including configuration file /etc/freeradius/3.0/mods-enabled/pap
including configuration file /etc/freeradius/3.0/mods-enabled/mschap
including configuration file /etc/freeradius/3.0/mods-enabled/digest
including configuration file /etc/freeradius/3.0/mods-enabled/replicate
including configuration file /etc/freeradius/3.0/mods-enabled/ldap
including configuration file /etc/freeradius/3.0/mods-enabled/linelog
including files in directory /etc/freeradius/3.0/policy.d/
including configuration file /etc/freeradius/3.0/policy.d/debug
including configuration file /etc/freeradius/3.0/policy.d/eap
including configuration file /etc/freeradius/3.0/policy.d/dhcp
including configuration file /etc/freeradius/3.0/policy.d/abfab-tr
including configuration file /etc/freeradius/3.0/policy.d/canonicalization
including configuration file /etc/freeradius/3.0/policy.d/operator-name
including configuration file /etc/freeradius/3.0/policy.d/moonshot-targeted-ids
including configuration file /etc/freeradius/3.0/policy.d/cui
including configuration file /etc/freeradius/3.0/policy.d/filter
including configuration file /etc/freeradius/3.0/policy.d/accounting
including configuration file /etc/freeradius/3.0/policy.d/control
including files in directory /etc/freeradius/3.0/sites-enabled/
including configuration file /etc/freeradius/3.0/sites-enabled/default
including configuration file /etc/freeradius/3.0/sites-enabled/inner-tunnel
main {
 security {
 	user = "freerad"
 	group = "freerad"
 	allow_core_dumps = no
 }
	name = "freeradius"
	prefix = "/usr"
	localstatedir = "/var"
	logdir = "/var/log/freeradius"
	run_dir = "/var/run/freeradius"
}
main {
	name = "freeradius"
	prefix = "/usr"
	localstatedir = "/var"
	sbindir = "/usr/sbin"
	logdir = "/var/log/freeradius"
	run_dir = "/var/run/freeradius"
	libdir = "/usr/lib/freeradius"
	radacctdir = "/var/log/freeradius/radacct"
	hostname_lookups = no
	max_request_time = 30
	cleanup_delay = 5
	max_requests = 16384
	pidfile = "/var/run/freeradius/freeradius.pid"
	checkrad = "/usr/sbin/checkrad"
	debug_level = 0
	proxy_requests = yes
 log {
 	stripped_names = no
 	auth = no
 	auth_badpass = no
 	auth_goodpass = no
 	colourise = yes
 	msg_denied = "You are already logged in - access denied"
 }
 resources {
 }
 security {
 	max_attributes = 200
 	reject_delay = 1.000000
 	status_server = yes
 }
}
radiusd: #### Loading Realms and Home Servers ####
 proxy server {
 	retry_delay = 5
 	retry_count = 3
 	default_fallback = no
 	dead_time = 120
 	wake_all_if_all_dead = no
 }
 home_server localhost {
 	ipaddr = 127.0.0.1
 	port = 1812
 	type = "auth"
 	secret = <<< secret >>>
 	response_window = 20.000000
 	response_timeouts = 1
 	max_outstanding = 65536
 	zombie_period = 40
 	status_check = "status-server"
 	ping_interval = 30
 	check_interval = 30
 	check_timeout = 4
 	num_answers_to_alive = 3
 	revive_interval = 120
  limit {
  	max_connections = 16
  	max_requests = 0
  	lifetime = 0
  	idle_timeout = 0
  }
  coa {
  	irt = 2
  	mrt = 16
  	mrc = 5
  	mrd = 30
  }
 }
 home_server_pool my_auth_failover {
	type = fail-over
	home_server = localhost
 }
 realm example.com {
	auth_pool = my_auth_failover
 }
 realm LOCAL {
 }
radiusd: #### Loading Clients ####
 client HUB-forti {
 	ipaddr = 10.255.0.1/32
 	require_message_authenticator = no
 	secret = <<< secret >>>
  limit {
  	max_connections = 50
  	lifetime = 45
  	idle_timeout = 30
  }
 }
 client HUB-OVH-PCC {
 	ipaddr = 10.100.11.254/32
 	require_message_authenticator = no
 	secret = <<< secret >>>
  limit {
  	max_connections = 50
  	lifetime = 45
  	idle_timeout = 30
  }
 }
 client BXL-net {
 	ipaddr = 10.5.0.0/22
 	require_message_authenticator = no
 	secret = <<< secret >>>
  limit {
  	max_connections = 50
  	lifetime = 45
  	idle_timeout = 30
  }
 }
 client LGE-net {
 	ipaddr = 10.4.0.0/22
 	require_message_authenticator = no
 	secret = <<< secret >>>
  limit {
  	max_connections = 50
  	lifetime = 45
  	idle_timeout = 30
  }
 }
 client PAR-net {
 	ipaddr = 10.6.0.0/22
 	require_message_authenticator = no
 	secret = <<< secret >>>
  limit {
  	max_connections = 50
  	lifetime = 45
  	idle_timeout = 30
  }
 }
 client GDN-net {
 	ipaddr = 10.8.0.0/22
 	require_message_authenticator = no
 	secret = <<< secret >>>
  limit {
  	max_connections = 50
  	lifetime = 45
  	idle_timeout = 30
  }
 }
 client localhost {
 	ipaddr = 127.0.0.1
 	require_message_authenticator = no
 	secret = <<< secret >>>
 	nas_type = "other"
 	proto = "*"
  limit {
  	max_connections = 16
  	lifetime = 0
  	idle_timeout = 30
  }
 }
 client localhost_ipv6 {
 	ipv6addr = ::1
 	require_message_authenticator = no
 	secret = <<< secret >>>
  limit {
  	max_connections = 16
  	lifetime = 0
  	idle_timeout = 30
  }
 }
Debugger not attached
 # Creating Auth-Type = eap
 # Creating Auth-Type = PAP
 # Creating Auth-Type = LDAP
 # Creating Auth-Type = mschap
 # Creating Auth-Type = CHAP
 # Creating Auth-Type = MS-CHAP
radiusd: #### Instantiating modules ####
 modules {
  # Loaded module rlm_dynamic_clients
  # Loading module "dynamic_clients" from file /etc/freeradius/3.0/mods-enabled/dynamic_clients
  # Loaded module rlm_chap
  # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap
  # Loaded module rlm_eap
  # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap
  eap {
  	default_eap_type = "ttls"
  	timer_expire = 60
  	ignore_unknown_eap_types = no
  	cisco_accounting_username_bug = no
  	max_sessions = 16384
  }
  # Loaded module rlm_radutmp
  # Loading module "sradutmp" from file /etc/freeradius/3.0/mods-enabled/sradutmp
  radutmp sradutmp {
  	filename = "/var/log/freeradius/sradutmp"
  	username = "%{User-Name}"
  	case_sensitive = yes
  	check_with_nas = yes
  	permissions = 420
  	caller_id = no
  }
  # Loaded module rlm_attr_filter
  # Loading module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.post-proxy {
  	filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy"
  	key = "%{Realm}"
  	relaxed = no
  }
  # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.pre-proxy {
  	filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy"
  	key = "%{Realm}"
  	relaxed = no
  }
  # Loading module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.access_reject {
  	filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject"
  	key = "%{User-Name}"
  	relaxed = no
  }
  # Loading module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.access_challenge {
  	filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge"
  	key = "%{User-Name}"
  	relaxed = no
  }
  # Loading module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.accounting_response {
  	filename = "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response"
  	key = "%{User-Name}"
  	relaxed = no
  }
  # Loaded module rlm_files
  # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files
  files {
  	filename = "/etc/freeradius/3.0/mods-config/files/authorize"
  	acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting"
  	preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy"
  }
  # Loaded module rlm_expiration
  # Loading module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration
  # Loaded module rlm_unix
  # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix
  unix {
  	radwtmp = "/var/log/freeradius/radwtmp"
  }
Creating attribute Unix-Group
  # Loaded module rlm_preprocess
  # Loading module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess
  preprocess {
  	huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups"
  	hints = "/etc/freeradius/3.0/mods-config/preprocess/hints"
  	with_ascend_hack = no
  	ascend_channels_per_line = 23
  	with_ntdomain_hack = no
  	with_specialix_jetstream_hack = no
  	with_cisco_vsa_hack = no
  	with_alvarion_vsa_hack = no
  }
  # Loaded module rlm_exec
  # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo
  exec echo {
  	wait = yes
  	program = "/bin/echo %{User-Name}"
  	input_pairs = "request"
  	output_pairs = "reply"
  	shell_escape = yes
  }
  # Loading module "ntlm_auth" from file /etc/freeradius/3.0/mods-enabled/ntlm_auth
  exec ntlm_auth {
  	wait = yes
  	program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}"
  	shell_escape = yes
  }
  # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec
  exec {
  	wait = no
  	input_pairs = "request"
  	shell_escape = yes
  	timeout = 10
  }
  # Loaded module rlm_utf8
  # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8
  # Loaded module rlm_cache
  # Loading module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap
  cache cache_eap {
  	driver = "rlm_cache_rbtree"
  	key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
  	ttl = 15
  	max_entries = 0
  	epoch = 0
  	add_stats = no
  }
  # Loaded module rlm_passwd
  # Loading module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd
  passwd etc_passwd {
  	filename = "/etc/passwd"
  	format = "*User-Name:Crypt-Password:"
  	delimiter = ":"
  	ignore_nislike = no
  	ignore_empty = yes
  	allow_multiple_keys = no
  	hash_size = 100
  }
  # Loaded module rlm_expr
  # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr
  expr {
  	safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
  }
  # Loaded module rlm_logintime
  # Loading module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime
  logintime {
  	minimum_timeout = 60
  }
  # Loaded module rlm_detail
  # Loading module "detail" from file /etc/freeradius/3.0/mods-enabled/detail
  detail {
  	filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
  	header = "%t"
  	permissions = 384
  	locking = no
  	escape_filenames = no
  	log_packet_header = no
  }
  # Loaded module rlm_unpack
  # Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack
  # Loading module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
  detail auth_log {
  	filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
  	header = "%t"
  	permissions = 384
  	locking = no
  	escape_filenames = no
  	log_packet_header = no
  }
  # Loading module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
  detail reply_log {
  	filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
  	header = "%t"
  	permissions = 384
  	locking = no
  	escape_filenames = no
  	log_packet_header = no
  }
  # Loading module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
  detail pre_proxy_log {
  	filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
  	header = "%t"
  	permissions = 384
  	locking = no
  	escape_filenames = no
  	log_packet_header = no
  }
  # Loading module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
  detail post_proxy_log {
  	filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
  	header = "%t"
  	permissions = 384
  	locking = no
  	escape_filenames = no
  	log_packet_header = no
  }
  # Loaded module rlm_always
  # Loading module "reject" from file /etc/freeradius/3.0/mods-enabled/always
  always reject {
  	rcode = "reject"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always
  always fail {
  	rcode = "fail"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always
  always ok {
  	rcode = "ok"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "handled" from file /etc/freeradius/3.0/mods-enabled/always
  always handled {
  	rcode = "handled"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "invalid" from file /etc/freeradius/3.0/mods-enabled/always
  always invalid {
  	rcode = "invalid"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "userlock" from file /etc/freeradius/3.0/mods-enabled/always
  always userlock {
  	rcode = "userlock"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "notfound" from file /etc/freeradius/3.0/mods-enabled/always
  always notfound {
  	rcode = "notfound"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always
  always noop {
  	rcode = "noop"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "updated" from file /etc/freeradius/3.0/mods-enabled/always
  always updated {
  	rcode = "updated"
  	simulcount = 0
  	mpp = no
  }
  # Loaded module rlm_soh
  # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh
  soh {
  	dhcp = yes
  }
  # Loaded module rlm_realm
  # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm
  realm IPASS {
  	format = "prefix"
  	delimiter = "/"
  	ignore_default = no
  	ignore_null = no
  }
  # Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm
  realm suffix {
  	format = "suffix"
  	delimiter = "@"
  	ignore_default = no
  	ignore_null = no
  }
  # Loading module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm
  realm realmpercent {
  	format = "suffix"
  	delimiter = "%"
  	ignore_default = no
  	ignore_null = no
  }
  # Loading module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm
  realm ntdomain {
  	format = "prefix"
  	delimiter = "\\"
  	ignore_default = no
  	ignore_null = no
  }
  # Loading module "radutmp" from file /etc/freeradius/3.0/mods-enabled/radutmp
  radutmp {
  	filename = "/var/log/freeradius/radutmp"
  	username = "%{User-Name}"
  	case_sensitive = yes
  	check_with_nas = yes
  	permissions = 384
  	caller_id = yes
  }
  # Loaded module rlm_pap
  # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap
  pap {
  	normalise = yes
  }
  # Loaded module rlm_mschap
  # Loading module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap
  mschap {
  	use_mppe = yes
  	require_encryption = no
  	require_strong = no
  	with_ntdomain_hack = yes
   passchange {
   }
  	allow_retry = yes
  	winbind_retry_with_normalised_username = no
  }
  # Loaded module rlm_digest
  # Loading module "digest" from file /etc/freeradius/3.0/mods-enabled/digest
  # Loaded module rlm_replicate
  # Loading module "replicate" from file /etc/freeradius/3.0/mods-enabled/replicate
  # Loaded module rlm_ldap
  # Loading module "ldap" from file /etc/freeradius/3.0/mods-enabled/ldap
  ldap {
  	server = "ldaps://localhost"
  	port = 636
  	identity = "uid=proxyagent,ou=users,dc=anonymized,dc=com"
  	password = <<< secret >>>
   sasl {
   }
   user {
   	scope = "sub"
   	access_positive = yes
    sasl {
    }
   }
   group {
   	filter = "(objectClass=posixGroup)"
   	scope = "sub"
   	name_attribute = "cn"
   	membership_attribute = "memberOf"
   	cacheable_name = no
   	cacheable_dn = no
   }
   client {
   	filter = "(objectClass=radiusClient)"
   	scope = "sub"
   	base_dn = "ou=%{tapp-ldap},dc=anonymized,dc=com"
   }
   profile {
   }
   options {
   	ldap_debug = 40
   	chase_referrals = yes
   	rebind = yes
   	net_timeout = 5
   	res_timeout = 10
   	srv_timelimit = 10
   	idle = 60
   	probes = 3
   	interval = 3
   }
   tls {
   	start_tls = no
   }
  }
Creating attribute LDAP-Group
  # Loaded module rlm_linelog
  # Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog
  linelog {
  	filename = "/var/log/freeradius/linelog"
  	escape_filenames = no
  	syslog_severity = "info"
  	permissions = 384
  	format = "This is a log message for %{User-Name}"
  	reference = "messages.%{%{reply:Packet-Type}:-default}"
  }
  # Loading module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog
  linelog log_accounting {
  	filename = "/var/log/freeradius/linelog-accounting"
  	escape_filenames = no
  	syslog_severity = "info"
  	permissions = 384
  	format = ""
  	reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
  }
  instantiate {
  }
  # Instantiating module "eap" from file /etc/freeradius/3.0/mods-enabled/eap
   # Linked to sub-module rlm_eap_md5
   # Linked to sub-module rlm_eap_leap
   # Linked to sub-module rlm_eap_gtc
   gtc {
   	challenge = "Password: "
   	auth_type = "PAP"
   }
   # Linked to sub-module rlm_eap_tls
   tls {
   	tls = "tls-common"
   }
   tls-config tls-common {
   	verify_depth = 0
   	ca_path = "/etc/freeradius/3.0/certs"
   	pem_file_type = yes
   	private_key_file = "/etc/ldap/sasl2/ldap.in.anonymized.com.rad.key"
   	certificate_file = "/etc/ldap/sasl2/ldap.in.anonymized.com.cert.pem"
   	ca_file = "/etc/ldap/sasl2/ldap.in.anonymized.com.intermediate-cert.pem"
   	dh_file = "/etc/freeradius/3.0/certs/dh"
   	fragment_size = 1024
   	include_length = yes
   	auto_chain = yes
   	check_crl = no
   	check_all_crl = no
   	cipher_list = "DEFAULT"
   	cipher_server_preference = no
   	ecdh_curve = "prime256v1"
   	tls_max_version = ""
   	tls_min_version = "1.0"
    cache {
    	enable = no
    	lifetime = 24
    	max_entries = 255
    }
    verify {
    	skip_if_ocsp_ok = no
    }
    ocsp {
    	enable = no
    	override_cert_url = yes
    	url = "http://127.0.0.1/ocsp/"
    	use_nonce = yes
    	timeout = 0
    	softfail = no
    }
   }
   # Linked to sub-module rlm_eap_ttls
   ttls {
   	tls = "tls-common"
   	default_eap_type = "md5"
   	copy_request_to_tunnel = no
   	use_tunneled_reply = no
   	virtual_server = "inner-tunnel"
   	include_length = yes
   	require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_peap
   peap {
   	tls = "tls-common"
   	default_eap_type = "mschapv2"
   	copy_request_to_tunnel = no
   	use_tunneled_reply = no
   	proxy_tunneled_request_as_eap = yes
   	virtual_server = "inner-tunnel"
   	soh = no
   	require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_mschapv2
   mschapv2 {
   	with_ntdomain_hack = no
   	send_error = no
   }
  # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy
  # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy
  # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_reject
[/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" 	found in filter list for realm "DEFAULT". 
[/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" 	found in filter list for realm "DEFAULT". 
  # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_challenge
  # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/accounting_response
  # Instantiating module "files" from file /etc/freeradius/3.0/mods-enabled/files
reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize
reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting
reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy
  # Instantiating module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration
  # Instantiating module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess
reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups
reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints
  # Instantiating module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap
rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked
  # Instantiating module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
  # Instantiating module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime
  # Instantiating module "detail" from file /etc/freeradius/3.0/mods-enabled/detail
  # Instantiating module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output
  # Instantiating module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
  # Instantiating module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
  # Instantiating module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
  # Instantiating module "reject" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "fail" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "ok" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "handled" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "invalid" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "userlock" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "notfound" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "noop" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "updated" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "pap" from file /etc/freeradius/3.0/mods-enabled/pap
  # Instantiating module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap
rlm_mschap (mschap): using internal authentication
/etc/freeradius/3.0/mods-enabled/ldap[313]: Found dynamic expansion in string which will not be dynamically expanded
  # Instantiating module "ldap" from file /etc/freeradius/3.0/mods-enabled/ldap
rlm_ldap: libldap vendor: OpenLDAP, version: 20445
   accounting {
   	reference = "%{tolower:type.%{Acct-Status-Type}}"
   }
   post-auth {
   	reference = "."
   }
rlm_ldap (ldap): Initialising connection pool
   pool {
   	start = 5
   	min = 3
   	max = 32
   	spare = 10
   	uses = 0
   	lifetime = 0
   	cleanup_interval = 30
   	idle_timeout = 60
   	retry_delay = 30
   	spread = no
   }
rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots used
rlm_ldap (ldap): Connecting to ldaps://localhost:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots used
rlm_ldap (ldap): Connecting to ldaps://localhost:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots used
rlm_ldap (ldap): Connecting to ldaps://localhost:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots used
rlm_ldap (ldap): Connecting to ldaps://localhost:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots used
rlm_ldap (ldap): Connecting to ldaps://localhost:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
  # Instantiating module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog
  # Instantiating module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog
 } # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/freeradius/3.0/radiusd.conf
} # server
server default { # from file /etc/freeradius/3.0/sites-enabled/default
 # Loading authenticate {...}
 # Loading authorize {...}
Ignoring "sql" (see raddb/mods-available/README.rst)
 # Loading preacct {...}
 # Loading accounting {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
} # server default
server inner-tunnel { # from file /etc/freeradius/3.0/sites-enabled/inner-tunnel
 # Loading authenticate {...}
 # Loading authorize {...}
 # Loading session {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
 # Skipping contents of 'if' as it is always 'false' -- /etc/freeradius/3.0/sites-enabled/inner-tunnel:349
} # server inner-tunnel
 thread pool {
 	start_servers = 5
 	max_servers = 32
 	min_spare_servers = 3
 	max_spare_servers = 10
 	max_requests_per_server = 0
 	cleanup_delay = 5
 	max_queue_size = 65536
 	auto_limit_acct = no
 }
Thread spawned new child 1. Total threads in pool: 1
Thread 1 waiting to be assigned a request
Thread spawned new child 2. Total threads in pool: 2
Thread 2 waiting to be assigned a request
Thread spawned new child 3. Total threads in pool: 3
Thread 3 waiting to be assigned a request
Thread spawned new child 4. Total threads in pool: 4
Thread 4 waiting to be assigned a request
Thread spawned new child 5. Total threads in pool: 5
Thread pool initialized
Thread 5 waiting to be assigned a request
radiusd: #### Opening IP addresses and Ports ####
listen {
  	type = "auth"
  	ipaddr = *
  	port = 0
   limit {
   	max_connections = 16
   	lifetime = 0
   	idle_timeout = 30
   }
}
listen {
  	type = "acct"
  	ipaddr = *
  	port = 0
   limit {
   	max_connections = 16
   	lifetime = 0
   	idle_timeout = 30
   }
}
listen {
  	type = "auth"
  	ipv6addr = ::
  	port = 0
   limit {
   	max_connections = 16
   	lifetime = 0
   	idle_timeout = 30
   }
}
listen {
  	type = "acct"
  	ipv6addr = ::
  	port = 0
   limit {
   	max_connections = 16
   	lifetime = 0
   	idle_timeout = 30
   }
}
listen {
  	type = "auth"
  	ipaddr = 127.0.0.1
  	port = 18120
}
Listening on auth address * port 1812 bound to server default
Listening on acct address * port 1813 bound to server default
Listening on auth address :: port 1812 bound to server default
Listening on acct address :: port 1813 bound to server default
Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
Listening on proxy address * port 43923
Listening on proxy address :: port 41103
Ready to process requests
Threads: total/active/spare threads = 5/0/5
Waking up in 0.3 seconds.
Thread 4 got semaphore
Thread 4 handling request 0, (1 handled so far)
(0) Received Access-Request Id 63 from 10.8.1.6:56429 to 10.100.11.20:1812 length 221
(0)   User-Name = "wifi"
(0)   NAS-IP-Address = 10.8.1.6
(0)   NAS-Identifier = "c6fbe4c2d34e"
(0)   Called-Station-Id = "C6-FB-E4-C2-D3-4E:anonymized Corp"
(0)   NAS-Port-Type = Wireless-802.11
(0)   Service-Type = Framed-User
(0)   Calling-Station-Id = "F0-18-98-08-86-BB"
(0)   Connect-Info = "CONNECT 0Mbps 802.11b"
(0)   Acct-Session-Id = "0C607EA544BA0748"
(0)   Acct-Multi-Session-Id = "C0D7CADBD7EF1318"
(0)   WLAN-Pairwise-Cipher = 1027076
(0)   WLAN-Group-Cipher = 1027076
(0)   WLAN-AKM-Suite = 1027073
(0)   Framed-MTU = 1002
(0)   EAP-Message = 0x028700090177696669
(0)   Message-Authenticator = 0x3360a598b76412eb3f42ff615d7b3bc7
(0) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(0)   authorize {
(0)     policy rewrite_called_station_id {
(0)       if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) {
(0)       if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))  -> TRUE
(0)       if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))  {
(0)         update request {
(0)           EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}}
(0)              --> C6-FB-E4-C2-D3-4E
(0)           &Called-Station-Id := C6-FB-E4-C2-D3-4E
(0)         } # update request = noop
(0)         if ("%{8}") {
(0)         EXPAND %{8}
(0)            --> anonymized Corp
(0)         if ("%{8}")  -> TRUE
(0)         if ("%{8}")  {
(0)           update request {
(0)             EXPAND %{8}
(0)                --> anonymized Corp
(0)             &Called-Station-SSID := anonymized Corp
(0)           } # update request = noop
(0)         } # if ("%{8}")  = noop
(0)         [updated] = updated
(0)       } # if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))  = updated
(0)       ... skipping else: Preceding "if" was taken
(0)     } # policy rewrite_called_station_id = updated
(0)     if (&Called-Station-SSID == 'anonymized Corp Device') {
(0)     if (&Called-Station-SSID == 'anonymized Corp Device')  -> FALSE
(0)     else {
(0)       update request {
(0)         tapp-ldap = "users"
(0)       } # update request = noop
(0)     } # else = noop
(0)     policy filter_username {
(0)       if (&User-Name) {
(0)       if (&User-Name)  -> TRUE
(0)       if (&User-Name)  {
(0)         if (&User-Name =~ / /) {
(0)         if (&User-Name =~ / /)  -> FALSE
(0)         if (&User-Name =~ /@[^@]*@/ ) {
(0)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(0)         if (&User-Name =~ /\.\./ ) {
(0)         if (&User-Name =~ /\.\./ )  -> FALSE
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(0)         if (&User-Name =~ /\.$/)  {
(0)         if (&User-Name =~ /\.$/)   -> FALSE
(0)         if (&User-Name =~ /@\./)  {
(0)         if (&User-Name =~ /@\./)   -> FALSE
(0)       } # if (&User-Name)  = updated
(0)     } # policy filter_username = updated
(0)     [preprocess] = ok
(0)     [chap] = noop
(0)     [mschap] = noop
(0)     [digest] = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: No '@' in User-Name = "wifi", looking up realm NULL
(0) suffix: No such realm "NULL"
(0)     [suffix] = noop
(0) eap: Peer sent EAP Response (code 2) ID 135 length 9
(0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize
(0)     [eap] = ok
(0)   } # authorize = ok
(0) Found Auth-Type = eap
(0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(0)   authenticate {
(0) eap: Peer sent packet with method EAP Identity (1)
(0) eap: Calling submodule eap_ttls to process data
(0) eap_ttls: Initiating new EAP-TLS session
(0) eap_ttls: [eaptls start] = request
(0) eap: Sending EAP Request (code 1) ID 136 length 6
(0) eap: EAP session adding &reply:State = 0x1475316b14fd24ab
(0)     [eap] = handled
(0)   } # authenticate = handled
(0) Using Post-Auth-Type Challenge
(0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(0)   Challenge { ... } # empty sub-section is ignored
(0) Sent Access-Challenge Id 63 from 10.100.11.20:1812 to 10.8.1.6:56429 length 0
(0)   EAP-Message = 0x018800061520
(0)   Message-Authenticator = 0x00000000000000000000000000000000
(0)   State = 0x1475316b14fd24abafd77605137b8985
(0) Finished request
Thread 4 waiting to be assigned a request
Waking up in 0.2 seconds.
Thread 3 got semaphore
Thread 3 handling request 1, (1 handled so far)
(1) Received Access-Request Id 64 from 10.8.1.6:56429 to 10.100.11.20:1812 length 357
(1)   User-Name = "wifi"
(1)   NAS-IP-Address = 10.8.1.6
(1)   NAS-Identifier = "c6fbe4c2d34e"
(1)   Called-Station-Id = "C6-FB-E4-C2-D3-4E:anonymized Corp"
(1)   NAS-Port-Type = Wireless-802.11
(1)   Service-Type = Framed-User
(1)   Calling-Station-Id = "F0-18-98-08-86-BB"
(1)   Connect-Info = "CONNECT 0Mbps 802.11b"
(1)   Acct-Session-Id = "0C607EA544BA0748"
(1)   Acct-Multi-Session-Id = "C0D7CADBD7EF1318"
(1)   WLAN-Pairwise-Cipher = 1027076
(1)   WLAN-Group-Cipher = 1027076
(1)   WLAN-AKM-Suite = 1027073
(1)   Framed-MTU = 1002
(1)   EAP-Message = 0x0288007f15800000007516030100700100006c030165c38512bb8ba62395a906e0c889ca46b300b4d0d68b3a399a1eac8d1a9c4b3000002000ffc024c023c00ac009c008c028c027c014c013c012003d003c0035002f000a01000023000a00080006001700180019000b00020100000500050100000000
(1)   State = 0x1475316b14fd24abafd77605137b8985
(1)   Message-Authenticator = 0xecf4a06b19e16a6037e6152a5d8f3761
(1) session-state: No cached attributes
(1) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(1)   authorize {
(1)     policy rewrite_called_station_id {
(1)       if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) {
(1)       if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))  -> TRUE
(1)       if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))  {
(1)         update request {
(1)           EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}}
(1)              --> C6-FB-E4-C2-D3-4E
(1)           &Called-Station-Id := C6-FB-E4-C2-D3-4E
(1)         } # update request = noop
(1)         if ("%{8}") {
(1)         EXPAND %{8}
(1)            --> anonymized Corp
(1)         if ("%{8}")  -> TRUE
(1)         if ("%{8}")  {
(1)           update request {
(1)             EXPAND %{8}
(1)                --> anonymized Corp
(1)             &Called-Station-SSID := anonymized Corp
(1)           } # update request = noop
(1)         } # if ("%{8}")  = noop
(1)         [updated] = updated
(1)       } # if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))  = updated
(1)       ... skipping else: Preceding "if" was taken
(1)     } # policy rewrite_called_station_id = updated
(1)     if (&Called-Station-SSID == 'anonymized Corp Device') {
(1)     if (&Called-Station-SSID == 'anonymized Corp Device')  -> FALSE
(1)     else {
(1)       update request {
(1)         tapp-ldap = "users"
(1)       } # update request = noop
(1)     } # else = noop
(1)     policy filter_username {
(1)       if (&User-Name) {
(1)       if (&User-Name)  -> TRUE
(1)       if (&User-Name)  {
(1)         if (&User-Name =~ / /) {
(1)         if (&User-Name =~ / /)  -> FALSE
(1)         if (&User-Name =~ /@[^@]*@/ ) {
(1)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(1)         if (&User-Name =~ /\.\./ ) {
(1)         if (&User-Name =~ /\.\./ )  -> FALSE
(1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(1)         if (&User-Name =~ /\.$/)  {
(1)         if (&User-Name =~ /\.$/)   -> FALSE
(1)         if (&User-Name =~ /@\./)  {
(1)         if (&User-Name =~ /@\./)   -> FALSE
(1)       } # if (&User-Name)  = updated
(1)     } # policy filter_username = updated
(1)     [preprocess] = ok
(1)     [chap] = noop
(1)     [mschap] = noop
(1)     [digest] = noop
(1) suffix: Checking for suffix after "@"
(1) suffix: No '@' in User-Name = "wifi", looking up realm NULL
(1) suffix: No such realm "NULL"
(1)     [suffix] = noop
(1) eap: Peer sent EAP Response (code 2) ID 136 length 127
(1) eap: Continuing tunnel setup
(1)     [eap] = ok
(1)   } # authorize = ok
(1) Found Auth-Type = eap
(1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(1)   authenticate {
(1) eap: Expiring EAP session with state 0x1475316b14fd24ab
(1) eap: Finished EAP session with state 0x1475316b14fd24ab
(1) eap: Previous EAP request found for state 0x1475316b14fd24ab, released from the list
(1) eap: Peer sent packet with method EAP TTLS (21)
(1) eap: Calling submodule eap_ttls to process data
(1) eap_ttls: Authenticate
(1) eap_ttls: Continuing EAP-TLS
(1) eap_ttls: Peer indicated complete TLS record size will be 117 bytes
(1) eap_ttls: Got complete TLS record (117 bytes)
(1) eap_ttls: [eaptls verify] = length included
(1) eap_ttls: (other): before SSL initialization
(1) eap_ttls: TLS_accept: before SSL initialization
(1) eap_ttls: TLS_accept: before SSL initialization
(1) eap_ttls: <<< recv UNKNOWN TLS VERSION ?0304? [length 0070] 
(1) eap_ttls: TLS_accept: SSLv3/TLS read client hello
(1) eap_ttls: >>> send TLS 1.0 Handshake [length 003d], ServerHello 
(1) eap_ttls: TLS_accept: SSLv3/TLS write server hello
(1) eap_ttls: >>> send TLS 1.0 Handshake [length 0c05], Certificate 
(1) eap_ttls: TLS_accept: SSLv3/TLS write certificate
(1) eap_ttls: >>> send TLS 1.0 Handshake [length 024b], ServerKeyExchange 
(1) eap_ttls: TLS_accept: SSLv3/TLS write key exchange
(1) eap_ttls: >>> send TLS 1.0 Handshake [length 0004], ServerHelloDone 
(1) eap_ttls: TLS_accept: SSLv3/TLS write server done
(1) eap_ttls: TLS_accept: Need to read more data: SSLv3/TLS write server done
(1) eap_ttls: In SSL Handshake Phase
(1) eap_ttls: In SSL Accept mode
(1) eap_ttls: [eaptls process] = handled
(1) eap: Sending EAP Request (code 1) ID 137 length 1004
(1) eap: EAP session adding &reply:State = 0x1475316b15fc24ab
(1)     [eap] = handled
(1)   } # authenticate = handled
(1) Using Post-Auth-Type Challenge
(1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(1)   Challenge { ... } # empty sub-section is ignored
(1) Sent Access-Challenge Id 64 from 10.100.11.20:1812 to 10.8.1.6:56429 length 0
(1)   EAP-Message = 0x018903ec15c000000ea5160301003d0200003903019ffcbfe13a0b9127c6549a076ab0e4cc2ed9c1feeb7172fc444f574e4752440000c014000011ff01000100000b000403000102001700001603010c050b000c01000bfe0007413082073d30820625a003020102021002639614dafdb7e7215ed0e173
(1)   Message-Authenticator = 0x00000000000000000000000000000000
(1)   State = 0x1475316b15fc24abafd77605137b8985
(1) Finished request
Thread 3 waiting to be assigned a request
Waking up in 0.2 seconds.
Thread 2 got semaphore
Thread 2 handling request 2, (1 handled so far)
(2) Received Access-Request Id 65 from 10.8.1.6:56429 to 10.100.11.20:1812 length 236
(2)   User-Name = "wifi"
(2)   NAS-IP-Address = 10.8.1.6
(2)   NAS-Identifier = "c6fbe4c2d34e"
(2)   Called-Station-Id = "C6-FB-E4-C2-D3-4E:anonymized Corp"
(2)   NAS-Port-Type = Wireless-802.11
(2)   Service-Type = Framed-User
(2)   Calling-Station-Id = "F0-18-98-08-86-BB"
(2)   Connect-Info = "CONNECT 0Mbps 802.11b"
(2)   Acct-Session-Id = "0C607EA544BA0748"
(2)   Acct-Multi-Session-Id = "C0D7CADBD7EF1318"
(2)   WLAN-Pairwise-Cipher = 1027076
(2)   WLAN-Group-Cipher = 1027076
(2)   WLAN-AKM-Suite = 1027073
(2)   Framed-MTU = 1002
(2)   EAP-Message = 0x028900061500
(2)   State = 0x1475316b15fc24abafd77605137b8985
(2)   Message-Authenticator = 0xb707c058ba70b009fc7ba4017f118d98
(2) session-state: No cached attributes
(2) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(2)   authorize {
(2)     policy rewrite_called_station_id {
(2)       if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) {
(2)       if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))  -> TRUE
(2)       if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))  {
(2)         update request {
(2)           EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}}
(2)              --> C6-FB-E4-C2-D3-4E
(2)           &Called-Station-Id := C6-FB-E4-C2-D3-4E
(2)         } # update request = noop
(2)         if ("%{8}") {
(2)         EXPAND %{8}
(2)            --> anonymized Corp
(2)         if ("%{8}")  -> TRUE
(2)         if ("%{8}")  {
(2)           update request {
(2)             EXPAND %{8}
(2)                --> anonymized Corp
(2)             &Called-Station-SSID := anonymized Corp
(2)           } # update request = noop
(2)         } # if ("%{8}")  = noop
(2)         [updated] = updated
(2)       } # if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))  = updated
(2)       ... skipping else: Preceding "if" was taken
(2)     } # policy rewrite_called_station_id = updated
(2)     if (&Called-Station-SSID == 'anonymized Corp Device') {
(2)     if (&Called-Station-SSID == 'anonymized Corp Device')  -> FALSE
(2)     else {
(2)       update request {
(2)         tapp-ldap = "users"
(2)       } # update request = noop
(2)     } # else = noop
(2)     policy filter_username {
(2)       if (&User-Name) {
(2)       if (&User-Name)  -> TRUE
(2)       if (&User-Name)  {
(2)         if (&User-Name =~ / /) {
(2)         if (&User-Name =~ / /)  -> FALSE
(2)         if (&User-Name =~ /@[^@]*@/ ) {
(2)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(2)         if (&User-Name =~ /\.\./ ) {
(2)         if (&User-Name =~ /\.\./ )  -> FALSE
(2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(2)         if (&User-Name =~ /\.$/)  {
(2)         if (&User-Name =~ /\.$/)   -> FALSE
(2)         if (&User-Name =~ /@\./)  {
(2)         if (&User-Name =~ /@\./)   -> FALSE
(2)       } # if (&User-Name)  = updated
(2)     } # policy filter_username = updated
(2)     [preprocess] = ok
(2)     [chap] = noop
(2)     [mschap] = noop
(2)     [digest] = noop
(2) suffix: Checking for suffix after "@"
(2) suffix: No '@' in User-Name = "wifi", looking up realm NULL
(2) suffix: No such realm "NULL"
(2)     [suffix] = noop
(2) eap: Peer sent EAP Response (code 2) ID 137 length 6
(2) eap: Continuing tunnel setup
(2)     [eap] = ok
(2)   } # authorize = ok
(2) Found Auth-Type = eap
(2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(2)   authenticate {
(2) eap: Expiring EAP session with state 0x1475316b15fc24ab
(2) eap: Finished EAP session with state 0x1475316b15fc24ab
(2) eap: Previous EAP request found for state 0x1475316b15fc24ab, released from the list
(2) eap: Peer sent packet with method EAP TTLS (21)
(2) eap: Calling submodule eap_ttls to process data
(2) eap_ttls: Authenticate
(2) eap_ttls: Continuing EAP-TLS
(2) eap_ttls: Peer ACKed our handshake fragment
(2) eap_ttls: [eaptls verify] = request
(2) eap_ttls: [eaptls process] = handled
(2) eap: Sending EAP Request (code 1) ID 138 length 1004
(2) eap: EAP session adding &reply:State = 0x1475316b16ff24ab
(2)     [eap] = handled
(2)   } # authenticate = handled
(2) Using Post-Auth-Type Challenge
(2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(2)   Challenge { ... } # empty sub-section is ignored
(2) Sent Access-Challenge Id 65 from 10.100.11.20:1812 to 10.8.1.6:56429 length 0
(2)   EAP-Message = 0x018a03ec15c000000ea51406082b0601050507030106082b06010505070302303f0603551d1f043830363034a032a030862e687474703a2f2f6364702e726170696473736c2e636f6d2f526170696453534c544c53525341434147312e63726c303e0603551d20043730353033060667810c0102013029
(2)   Message-Authenticator = 0x00000000000000000000000000000000
(2)   State = 0x1475316b16ff24abafd77605137b8985
(2) Finished request
Thread 2 waiting to be assigned a request
Waking up in 0.1 seconds.
Thread 1 got semaphore
Thread 1 handling request 3, (1 handled so far)
(3) Received Access-Request Id 66 from 10.8.1.6:56429 to 10.100.11.20:1812 length 236
(3)   User-Name = "wifi"
(3)   NAS-IP-Address = 10.8.1.6
(3)   NAS-Identifier = "c6fbe4c2d34e"
(3)   Called-Station-Id = "C6-FB-E4-C2-D3-4E:anonymized Corp"
(3)   NAS-Port-Type = Wireless-802.11
(3)   Service-Type = Framed-User
(3)   Calling-Station-Id = "F0-18-98-08-86-BB"
(3)   Connect-Info = "CONNECT 0Mbps 802.11b"
(3)   Acct-Session-Id = "0C607EA544BA0748"
(3)   Acct-Multi-Session-Id = "C0D7CADBD7EF1318"
(3)   WLAN-Pairwise-Cipher = 1027076
(3)   WLAN-Group-Cipher = 1027076
(3)   WLAN-AKM-Suite = 1027073
(3)   Framed-MTU = 1002
(3)   EAP-Message = 0x028a00061500
(3)   State = 0x1475316b16ff24abafd77605137b8985
(3)   Message-Authenticator = 0xab09496bc9276d6acf3faf99f12d5ee5
(3) session-state: No cached attributes
(3) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(3)   authorize {
(3)     policy rewrite_called_station_id {
(3)       if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) {
(3)       if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))  -> TRUE
(3)       if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))  {
(3)         update request {
(3)           EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}}
(3)              --> C6-FB-E4-C2-D3-4E
(3)           &Called-Station-Id := C6-FB-E4-C2-D3-4E
(3)         } # update request = noop
(3)         if ("%{8}") {
(3)         EXPAND %{8}
(3)            --> anonymized Corp
(3)         if ("%{8}")  -> TRUE
(3)         if ("%{8}")  {
(3)           update request {
(3)             EXPAND %{8}
(3)                --> anonymized Corp
(3)             &Called-Station-SSID := anonymized Corp
(3)           } # update request = noop
(3)         } # if ("%{8}")  = noop
(3)         [updated] = updated
(3)       } # if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))  = updated
(3)       ... skipping else: Preceding "if" was taken
(3)     } # policy rewrite_called_station_id = updated
(3)     if (&Called-Station-SSID == 'anonymized Corp Device') {
(3)     if (&Called-Station-SSID == 'anonymized Corp Device')  -> FALSE
(3)     else {
(3)       update request {
(3)         tapp-ldap = "users"
(3)       } # update request = noop
(3)     } # else = noop
(3)     policy filter_username {
(3)       if (&User-Name) {
(3)       if (&User-Name)  -> TRUE
(3)       if (&User-Name)  {
(3)         if (&User-Name =~ / /) {
(3)         if (&User-Name =~ / /)  -> FALSE
(3)         if (&User-Name =~ /@[^@]*@/ ) {
(3)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(3)         if (&User-Name =~ /\.\./ ) {
(3)         if (&User-Name =~ /\.\./ )  -> FALSE
(3)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(3)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(3)         if (&User-Name =~ /\.$/)  {
(3)         if (&User-Name =~ /\.$/)   -> FALSE
(3)         if (&User-Name =~ /@\./)  {
(3)         if (&User-Name =~ /@\./)   -> FALSE
(3)       } # if (&User-Name)  = updated
(3)     } # policy filter_username = updated
(3)     [preprocess] = ok
(3)     [chap] = noop
(3)     [mschap] = noop
(3)     [digest] = noop
(3) suffix: Checking for suffix after "@"
(3) suffix: No '@' in User-Name = "wifi", looking up realm NULL
(3) suffix: No such realm "NULL"
(3)     [suffix] = noop
(3) eap: Peer sent EAP Response (code 2) ID 138 length 6
(3) eap: Continuing tunnel setup
(3)     [eap] = ok
(3)   } # authorize = ok
(3) Found Auth-Type = eap
(3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(3)   authenticate {
(3) eap: Expiring EAP session with state 0x1475316b16ff24ab
(3) eap: Finished EAP session with state 0x1475316b16ff24ab
(3) eap: Previous EAP request found for state 0x1475316b16ff24ab, released from the list
(3) eap: Peer sent packet with method EAP TTLS (21)
(3) eap: Calling submodule eap_ttls to process data
(3) eap_ttls: Authenticate
(3) eap_ttls: Continuing EAP-TLS
(3) eap_ttls: Peer ACKed our handshake fragment
(3) eap_ttls: [eaptls verify] = request
(3) eap_ttls: [eaptls process] = handled
(3) eap: Sending EAP Request (code 1) ID 139 length 1004
(3) eap: EAP session adding &reply:State = 0x1475316b17fe24ab
(3)     [eap] = handled
(3)   } # authenticate = handled
(3) Using Post-Auth-Type Challenge
(3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(3)   Challenge { ... } # empty sub-section is ignored
(3) Sent Access-Challenge Id 66 from 10.100.11.20:1812 to 10.8.1.6:56429 length 0
(3)   EAP-Message = 0x018b03ec15c000000ea561310b300906035504061302555331153013060355040a130c446967694365727420496e6331193017060355040b13107777772e64696769636572742e636f6d3120301e06035504031317446967694365727420476c6f62616c20526f6f74204732301e170d31373131303231
(3)   Message-Authenticator = 0x00000000000000000000000000000000
(3)   State = 0x1475316b17fe24abafd77605137b8985
(3) Finished request
Thread 1 waiting to be assigned a request
Waking up in 0.1 seconds.
Thread 5 got semaphore
Thread 5 handling request 4, (1 handled so far)
(4) Received Access-Request Id 67 from 10.8.1.6:56429 to 10.100.11.20:1812 length 236
(4)   User-Name = "wifi"
(4)   NAS-IP-Address = 10.8.1.6
(4)   NAS-Identifier = "c6fbe4c2d34e"
(4)   Called-Station-Id = "C6-FB-E4-C2-D3-4E:anonymized Corp"
(4)   NAS-Port-Type = Wireless-802.11
(4)   Service-Type = Framed-User
(4)   Calling-Station-Id = "F0-18-98-08-86-BB"
(4)   Connect-Info = "CONNECT 0Mbps 802.11b"
(4)   Acct-Session-Id = "0C607EA544BA0748"
(4)   Acct-Multi-Session-Id = "C0D7CADBD7EF1318"
(4)   WLAN-Pairwise-Cipher = 1027076
(4)   WLAN-Group-Cipher = 1027076
(4)   WLAN-AKM-Suite = 1027073
(4)   Framed-MTU = 1002
(4)   EAP-Message = 0x028b00061500
(4)   State = 0x1475316b17fe24abafd77605137b8985
(4)   Message-Authenticator = 0x3fb0697336f67363649604c0aee117ec
(4) session-state: No cached attributes
(4) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(4)   authorize {
(4)     policy rewrite_called_station_id {
(4)       if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) {
(4)       if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))  -> TRUE
(4)       if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))  {
(4)         update request {
(4)           EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}}
(4)              --> C6-FB-E4-C2-D3-4E
(4)           &Called-Station-Id := C6-FB-E4-C2-D3-4E
(4)         } # update request = noop
(4)         if ("%{8}") {
(4)         EXPAND %{8}
(4)            --> anonymized Corp
(4)         if ("%{8}")  -> TRUE
(4)         if ("%{8}")  {
(4)           update request {
(4)             EXPAND %{8}
(4)                --> anonymized Corp
(4)             &Called-Station-SSID := anonymized Corp
(4)           } # update request = noop
(4)         } # if ("%{8}")  = noop
(4)         [updated] = updated
(4)       } # if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))  = updated
(4)       ... skipping else: Preceding "if" was taken
(4)     } # policy rewrite_called_station_id = updated
(4)     if (&Called-Station-SSID == 'anonymized Corp Device') {
(4)     if (&Called-Station-SSID == 'anonymized Corp Device')  -> FALSE
(4)     else {
(4)       update request {
(4)         tapp-ldap = "users"
(4)       } # update request = noop
(4)     } # else = noop
(4)     policy filter_username {
(4)       if (&User-Name) {
(4)       if (&User-Name)  -> TRUE
(4)       if (&User-Name)  {
(4)         if (&User-Name =~ / /) {
(4)         if (&User-Name =~ / /)  -> FALSE
(4)         if (&User-Name =~ /@[^@]*@/ ) {
(4)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(4)         if (&User-Name =~ /\.\./ ) {
(4)         if (&User-Name =~ /\.\./ )  -> FALSE
(4)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(4)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(4)         if (&User-Name =~ /\.$/)  {
(4)         if (&User-Name =~ /\.$/)   -> FALSE
(4)         if (&User-Name =~ /@\./)  {
(4)         if (&User-Name =~ /@\./)   -> FALSE
(4)       } # if (&User-Name)  = updated
(4)     } # policy filter_username = updated
(4)     [preprocess] = ok
(4)     [chap] = noop
(4)     [mschap] = noop
(4)     [digest] = noop
(4) suffix: Checking for suffix after "@"
(4) suffix: No '@' in User-Name = "wifi", looking up realm NULL
(4) suffix: No such realm "NULL"
(4)     [suffix] = noop
(4) eap: Peer sent EAP Response (code 2) ID 139 length 6
(4) eap: Continuing tunnel setup
(4)     [eap] = ok
(4)   } # authorize = ok
(4) Found Auth-Type = eap
(4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(4)   authenticate {
(4) eap: Expiring EAP session with state 0x1475316b17fe24ab
(4) eap: Finished EAP session with state 0x1475316b17fe24ab
(4) eap: Previous EAP request found for state 0x1475316b17fe24ab, released from the list
(4) eap: Peer sent packet with method EAP TTLS (21)
(4) eap: Calling submodule eap_ttls to process data
(4) eap_ttls: Authenticate
(4) eap_ttls: Continuing EAP-TLS
(4) eap_ttls: Peer ACKed our handshake fragment
(4) eap_ttls: [eaptls verify] = request
(4) eap_ttls: [eaptls process] = handled
(4) eap: Sending EAP Request (code 1) ID 140 length 777
(4) eap: EAP session adding &reply:State = 0x1475316b10f924ab
(4)     [eap] = handled
(4)   } # authenticate = handled
(4) Using Post-Auth-Type Challenge
(4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(4)   Challenge { ... } # empty sub-section is ignored
(4) Sent Access-Challenge Id 67 from 10.100.11.20:1812 to 10.8.1.6:56429 length 0
(4)   EAP-Message = 0x018c0309158000000ea559dcb69a828bbef0bcb55991ce401ed314029112888db046f34312c835ff478b98823e9988d4ff660e8623a4687e0aa0a4376cb0b7345c8450128b7121970accfde9189f4509b30798c2cbcae05dfae096bd5705da881801ac2e7c2852fcf4fad43f6bab33d14b9236baa6b7b6
(4)   Message-Authenticator = 0x00000000000000000000000000000000
(4)   State = 0x1475316b10f924abafd77605137b8985
(4) Finished request
Thread 5 waiting to be assigned a request
Thread 4 got semaphore
Thread 4 handling request 5, (2 handled so far)
(5) Received Access-Request Id 68 from 10.8.1.6:56429 to 10.100.11.20:1812 length 374
(5)   User-Name = "wifi"
(5)   NAS-IP-Address = 10.8.1.6
(5)   NAS-Identifier = "c6fbe4c2d34e"
(5)   Called-Station-Id = "C6-FB-E4-C2-D3-4E:anonymized Corp"
(5)   NAS-Port-Type = Wireless-802.11
(5)   Service-Type = Framed-User
(5)   Calling-Station-Id = "F0-18-98-08-86-BB"
(5)   Connect-Info = "CONNECT 0Mbps 802.11b"
(5)   Acct-Session-Id = "0C607EA544BA0748"
(5)   Acct-Multi-Session-Id = "C0D7CADBD7EF1318"
(5)   WLAN-Pairwise-Cipher = 1027076
(5)   WLAN-Group-Cipher = 1027076
(5)   WLAN-AKM-Suite = 1027073
(5)   Framed-MTU = 1002
(5)   EAP-Message = 0x028c00901580000000861603010046100000424104bb9e41a40c1b196cb7e1482abcf3c2b7812fcbd5fd7432bfd2be7855dd09bd6d334b9861ce67ed6d3a206b12edebeb1e6a2683e43169d697c1b330b2b54c4f701403010001011603010030413ef0408d01dee6b113c08c0dc74859869f726c64fccb
(5)   State = 0x1475316b10f924abafd77605137b8985
(5)   Message-Authenticator = 0x3b7b3e6404102f4f35916372565b8079
(5) session-state: No cached attributes
(5) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(5)   authorize {
(5)     policy rewrite_called_station_id {
(5)       if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) {
(5)       if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))  -> TRUE
(5)       if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))  {
(5)         update request {
(5)           EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}}
(5)              --> C6-FB-E4-C2-D3-4E
(5)           &Called-Station-Id := C6-FB-E4-C2-D3-4E
(5)         } # update request = noop
(5)         if ("%{8}") {
(5)         EXPAND %{8}
(5)            --> anonymized Corp
(5)         if ("%{8}")  -> TRUE
(5)         if ("%{8}")  {
(5)           update request {
(5)             EXPAND %{8}
(5)                --> anonymized Corp
(5)             &Called-Station-SSID := anonymized Corp
(5)           } # update request = noop
(5)         } # if ("%{8}")  = noop
(5)         [updated] = updated
(5)       } # if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))  = updated
(5)       ... skipping else: Preceding "if" was taken
(5)     } # policy rewrite_called_station_id = updated
(5)     if (&Called-Station-SSID == 'anonymized Corp Device') {
(5)     if (&Called-Station-SSID == 'anonymized Corp Device')  -> FALSE
(5)     else {
(5)       update request {
(5)         tapp-ldap = "users"
(5)       } # update request = noop
(5)     } # else = noop
(5)     policy filter_username {
(5)       if (&User-Name) {
(5)       if (&User-Name)  -> TRUE
(5)       if (&User-Name)  {
(5)         if (&User-Name =~ / /) {
(5)         if (&User-Name =~ / /)  -> FALSE
(5)         if (&User-Name =~ /@[^@]*@/ ) {
(5)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(5)         if (&User-Name =~ /\.\./ ) {
(5)         if (&User-Name =~ /\.\./ )  -> FALSE
(5)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(5)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(5)         if (&User-Name =~ /\.$/)  {
(5)         if (&User-Name =~ /\.$/)   -> FALSE
(5)         if (&User-Name =~ /@\./)  {
(5)         if (&User-Name =~ /@\./)   -> FALSE
(5)       } # if (&User-Name)  = updated
(5)     } # policy filter_username = updated
(5)     [preprocess] = ok
(5)     [chap] = noop
(5)     [mschap] = noop
(5)     [digest] = noop
(5) suffix: Checking for suffix after "@"
(5) suffix: No '@' in User-Name = "wifi", looking up realm NULL
(5) suffix: No such realm "NULL"
(5)     [suffix] = noop
(5) eap: Peer sent EAP Response (code 2) ID 140 length 144
(5) eap: Continuing tunnel setup
(5)     [eap] = ok
(5)   } # authorize = ok
(5) Found Auth-Type = eap
(5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(5)   authenticate {
(5) eap: Expiring EAP session with state 0x1475316b10f924ab
(5) eap: Finished EAP session with state 0x1475316b10f924ab
(5) eap: Previous EAP request found for state 0x1475316b10f924ab, released from the list
(5) eap: Peer sent packet with method EAP TTLS (21)
(5) eap: Calling submodule eap_ttls to process data
(5) eap_ttls: Authenticate
(5) eap_ttls: Continuing EAP-TLS
(5) eap_ttls: Peer indicated complete TLS record size will be 134 bytes
(5) eap_ttls: Got complete TLS record (134 bytes)
(5) eap_ttls: [eaptls verify] = length included
(5) eap_ttls: TLS_accept: SSLv3/TLS write server done
(5) eap_ttls: <<< recv TLS 1.0 Handshake [length 0046], ClientKeyExchange 
(5) eap_ttls: TLS_accept: SSLv3/TLS read client key exchange
(5) eap_ttls: TLS_accept: SSLv3/TLS read change cipher spec
(5) eap_ttls: <<< recv TLS 1.0 Handshake [length 0010], Finished 
(5) eap_ttls: TLS_accept: SSLv3/TLS read finished
(5) eap_ttls: >>> send TLS 1.0 ChangeCipherSpec [length 0001] 
(5) eap_ttls: TLS_accept: SSLv3/TLS write change cipher spec
(5) eap_ttls: >>> send TLS 1.0 Handshake [length 0010], Finished 
(5) eap_ttls: TLS_accept: SSLv3/TLS write finished
(5) eap_ttls: (other): SSL negotiation finished successfully
(5) eap_ttls: SSL Connection Established
(5) eap_ttls: [eaptls process] = handled
(5) eap: Sending EAP Request (code 1) ID 141 length 69
(5) eap: EAP session adding &reply:State = 0x1475316b11f824ab
(5)     [eap] = handled
(5)   } # authenticate = handled
(5) Using Post-Auth-Type Challenge
(5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(5)   Challenge { ... } # empty sub-section is ignored
(5) Sent Access-Challenge Id 68 from 10.100.11.20:1812 to 10.8.1.6:56429 length 0
(5)   EAP-Message = 0x018d004515800000003b1403010001011603010030ce4c192befa7fb7eef47136835f23aae1f1a3223797c65d04b3e434cd183418ea1026210a1d168ecf10f632b5ba64f5a
(5)   Message-Authenticator = 0x00000000000000000000000000000000
(5)   State = 0x1475316b11f824abafd77605137b8985
(5) Finished request
Thread 4 waiting to be assigned a request
Thread 3 got semaphore
Thread 3 handling request 6, (2 handled so far)
(6) Received Access-Request Id 69 from 10.8.1.6:56429 to 10.100.11.20:1812 length 325
(6)   User-Name = "wifi"
(6)   NAS-IP-Address = 10.8.1.6
(6)   NAS-Identifier = "c6fbe4c2d34e"
(6)   Called-Station-Id = "C6-FB-E4-C2-D3-4E:anonymized Corp"
(6)   NAS-Port-Type = Wireless-802.11
(6)   Service-Type = Framed-User
(6)   Calling-Station-Id = "F0-18-98-08-86-BB"
(6)   Connect-Info = "CONNECT 0Mbps 802.11b"
(6)   Acct-Session-Id = "0C607EA544BA0748"
(6)   Acct-Multi-Session-Id = "C0D7CADBD7EF1318"
(6)   WLAN-Pairwise-Cipher = 1027076
(6)   WLAN-Group-Cipher = 1027076
(6)   WLAN-AKM-Suite = 1027073
(6)   Framed-MTU = 1002
(6)   EAP-Message = 0x028d005f1580000000551703010050db8bbce19abc33f3979796e56dd88987f03c160e86dd091400db22fc26c5e59bfe5db5f8a2a364e57845c2ba316d0c101dc96b3f84494090c0f3eb8c928297b2e13c729f43a1e275af3215e02cddb291
(6)   State = 0x1475316b11f824abafd77605137b8985
(6)   Message-Authenticator = 0x6fae1acb9ba46348d1f333f49a18e30e
(6) session-state: No cached attributes
(6) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(6)   authorize {
(6)     policy rewrite_called_station_id {
(6)       if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) {
(6)       if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))  -> TRUE
(6)       if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))  {
(6)         update request {
(6)           EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}}
(6)              --> C6-FB-E4-C2-D3-4E
(6)           &Called-Station-Id := C6-FB-E4-C2-D3-4E
(6)         } # update request = noop
(6)         if ("%{8}") {
(6)         EXPAND %{8}
(6)            --> anonymized Corp
(6)         if ("%{8}")  -> TRUE
(6)         if ("%{8}")  {
(6)           update request {
(6)             EXPAND %{8}
(6)                --> anonymized Corp
(6)             &Called-Station-SSID := anonymized Corp
(6)           } # update request = noop
(6)         } # if ("%{8}")  = noop
(6)         [updated] = updated
(6)       } # if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))  = updated
(6)       ... skipping else: Preceding "if" was taken
(6)     } # policy rewrite_called_station_id = updated
(6)     if (&Called-Station-SSID == 'anonymized Corp Device') {
(6)     if (&Called-Station-SSID == 'anonymized Corp Device')  -> FALSE
(6)     else {
(6)       update request {
(6)         tapp-ldap = "users"
(6)       } # update request = noop
(6)     } # else = noop
(6)     policy filter_username {
(6)       if (&User-Name) {
(6)       if (&User-Name)  -> TRUE
(6)       if (&User-Name)  {
(6)         if (&User-Name =~ / /) {
(6)         if (&User-Name =~ / /)  -> FALSE
(6)         if (&User-Name =~ /@[^@]*@/ ) {
(6)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(6)         if (&User-Name =~ /\.\./ ) {
(6)         if (&User-Name =~ /\.\./ )  -> FALSE
(6)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(6)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(6)         if (&User-Name =~ /\.$/)  {
(6)         if (&User-Name =~ /\.$/)   -> FALSE
(6)         if (&User-Name =~ /@\./)  {
(6)         if (&User-Name =~ /@\./)   -> FALSE
(6)       } # if (&User-Name)  = updated
(6)     } # policy filter_username = updated
(6)     [preprocess] = ok
(6)     [chap] = noop
(6)     [mschap] = noop
(6)     [digest] = noop
(6) suffix: Checking for suffix after "@"
(6) suffix: No '@' in User-Name = "wifi", looking up realm NULL
(6) suffix: No such realm "NULL"
(6)     [suffix] = noop
(6) eap: Peer sent EAP Response (code 2) ID 141 length 95
(6) eap: Continuing tunnel setup
(6)     [eap] = ok
(6)   } # authorize = ok
(6) Found Auth-Type = eap
(6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(6)   authenticate {
(6) eap: Expiring EAP session with state 0x1475316b11f824ab
(6) eap: Finished EAP session with state 0x1475316b11f824ab
(6) eap: Previous EAP request found for state 0x1475316b11f824ab, released from the list
(6) eap: Peer sent packet with method EAP TTLS (21)
(6) eap: Calling submodule eap_ttls to process data
(6) eap_ttls: Authenticate
(6) eap_ttls: Continuing EAP-TLS
(6) eap_ttls: Peer indicated complete TLS record size will be 85 bytes
(6) eap_ttls: Got complete TLS record (85 bytes)
(6) eap_ttls: [eaptls verify] = length included
(6) eap_ttls: [eaptls process] = ok
(6) eap_ttls: Session established.  Proceeding to decode tunneled attributes
(6) eap_ttls: Got tunneled request
(6) eap_ttls:   User-Name = "cza"
(6) eap_ttls:   User-Password = "Password123$"
(6) eap_ttls:   FreeRADIUS-Proxied-To = 127.0.0.1
(6) eap_ttls: Sending tunneled request
(6) Virtual server inner-tunnel received request
(6)   User-Name = "cza"
(6)   User-Password = "Password123$"
(6)   FreeRADIUS-Proxied-To = 127.0.0.1
(6) WARNING: Outer User-Name is not anonymized.  User privacy is compromised.
(6) server inner-tunnel {
(6)   # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel
(6)     authorize {
(6)       policy rewrite_called_station_id {
(6)         if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) {
(6)         if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))  -> FALSE
(6)         else {
(6)           [noop] = noop
(6)         } # else = noop
(6)       } # policy rewrite_called_station_id = noop
(6)       if (&Called-Station-SSID == 'anonymized Corp Device') {
(6)       ERROR: Failed retrieving values required to evaluate condition
(6)       else {
(6)         update request {
(6)           tapp-ldap = "users"
(6)         } # update request = noop
(6)       } # else = noop
(6)       policy filter_username {
(6)         if (&User-Name) {
(6)         if (&User-Name)  -> TRUE
(6)         if (&User-Name)  {
(6)           if (&User-Name =~ / /) {
(6)           if (&User-Name =~ / /)  -> FALSE
(6)           if (&User-Name =~ /@[^@]*@/ ) {
(6)           if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(6)           if (&User-Name =~ /\.\./ ) {
(6)           if (&User-Name =~ /\.\./ )  -> FALSE
(6)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(6)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(6)           if (&User-Name =~ /\.$/)  {
(6)           if (&User-Name =~ /\.$/)   -> FALSE
(6)           if (&User-Name =~ /@\./)  {
(6)           if (&User-Name =~ /@\./)   -> FALSE
(6)         } # if (&User-Name)  = noop
(6)       } # policy filter_username = noop
(6)       [chap] = noop
(6)       [mschap] = noop
(6) suffix: Checking for suffix after "@"
(6) suffix: No '@' in User-Name = "cza", looking up realm NULL
(6) suffix: No such realm "NULL"
(6)       [suffix] = noop
(6)       update control {
(6)         &Proxy-To-Realm := LOCAL
(6)       } # update control = noop
(6) eap: No EAP-Message, not doing EAP
(6)       [eap] = noop
(6)       [files] = noop
rlm_ldap (ldap): Reserved connection (0)
(6) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}})
(6) ldap:    --> (uid=cza)
(6) ldap: EXPAND ou=%{tapp-ldap},dc=anonymized,dc=com
(6) ldap:    --> ou=users,dc=anonymized,dc=com
(6) ldap: Performing search in "ou=users,dc=anonymized,dc=com" with filter "(uid=cza)", scope "sub"
(6) ldap: Waiting for search result...
(6) ldap: User object found at DN "uid=cza,ou=users,dc=anonymized,dc=com"
(6) ldap: Processing user attributes
(6) ldap: control:Password-With-Header += '{SSHA}z4O/Nrv4ACG21a7CpXgzdCunual1UGV1ZkdvZkkyNEI='
rlm_ldap (ldap): Released connection (0)
Need 5 more connections to reach 10 spares
rlm_ldap (ldap): Opening additional connection (5), 1 of 27 pending slots used
rlm_ldap (ldap): Connecting to ldaps://localhost:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
(6)       [ldap] = updated
(6)       [expiration] = noop
(6)       [logintime] = noop
(6) pap: Converted: &control:Password-With-Header -> &control:SSHA1-Password
(6) pap: Removing &control:Password-With-Header
(6) pap: Normalizing SSHA1-Password from base64 encoding, 44 bytes -> 32 bytes
(6)       [pap] = updated
(6)     } # authorize = updated
(6)   Found Auth-Type = PAP
(6)   # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel
(6)     Auth-Type PAP {
(6) pap: Login attempt with password
(6) pap: Comparing with "known-good" SSHA-Password
(6) pap: User authenticated successfully
(6)       [pap] = ok
(6)     } # Auth-Type PAP = ok
(6)   # Executing section post-auth from file /etc/freeradius/3.0/sites-enabled/inner-tunnel
(6)     post-auth {
(6)       if (0) {
(6)       if (0)  -> FALSE
(6)     } # post-auth = noop
(6) } # server inner-tunnel
(6) Virtual server sending reply
(6) eap_ttls: Got tunneled Access-Accept
(6) eap: Sending EAP Success (code 3) ID 141 length 4
(6) eap: Freeing handler
(6)     [eap] = ok
(6)   } # authenticate = ok
(6) # Executing section post-auth from file /etc/freeradius/3.0/sites-enabled/default
(6)   post-auth {
(6)     update {
(6)       No attributes updated
(6)     } # update = noop
(6)     [exec] = noop
(6)     policy remove_reply_message_if_eap {
(6)       if (&reply:EAP-Message && &reply:Reply-Message) {
(6)       if (&reply:EAP-Message && &reply:Reply-Message)  -> FALSE
(6)       else {
(6)         [noop] = noop
(6)       } # else = noop
(6)     } # policy remove_reply_message_if_eap = noop
(6)   } # post-auth = noop
(6) Sent Access-Accept Id 69 from 10.100.11.20:1812 to 10.8.1.6:56429 length 0
(6)   MS-MPPE-Recv-Key = 0x3615f71815f7f6461df573acbabc5079fd8e558b33512597d0f04d95c184fcda
(6)   MS-MPPE-Send-Key = 0x3577a9619de933099359132cafd86b29b2ec3f4a06976f0b850835295e1f49d3
(6)   EAP-Message = 0x038d0004
(6)   Message-Authenticator = 0x00000000000000000000000000000000
(6)   User-Name = "wifi"
(6) Finished request
Thread 3 waiting to be assigned a request
Waking up in 4.3 seconds.
(0) Cleaning up request packet ID 63 with timestamp +32
(1) Cleaning up request packet ID 64 with timestamp +32
(2) Cleaning up request packet ID 65 with timestamp +32
(3) Cleaning up request packet ID 66 with timestamp +32
(4) Cleaning up request packet ID 67 with timestamp +32
(5) Cleaning up request packet ID 68 with timestamp +32
(6) Cleaning up request packet ID 69 with timestamp +32
Ready to process requests

New server debug log:

○ freeradius.service - FreeRADIUS multi-protocol policy server
     Loaded: loaded (/lib/systemd/system/freeradius.service; enabled; vendor preset: enabled)
     Active: inactive (dead) since Mon 2024-02-05 13:47:05 CET; 2 days ago
       Docs: man:radiusd(8)
             man:radiusd.conf(5)
             http://wiki.freeradius.org/
             http://networkradius.com/doc/
   Main PID: 2347 (code=exited, status=0/SUCCESS)
     Status: "Processing requests"
        CPU: 4.057s

Jan 23 15:44:48 ldap-prod freeradius[2345]: Compiling Auth-Type MS-CHAP for attr Auth-Type
Jan 23 15:44:48 ldap-prod freeradius[2345]:  # Skipping contents of 'if' as it is always 'false' -- /etc/freeradius/3.0/sites-enabled/inner-tunnel:352
Jan 23 15:44:48 ldap-prod freeradius[2345]: Compiling Post-Auth-Type REJECT for attr Post-Auth-Type
Jan 23 15:44:48 ldap-prod freeradius[2345]: radiusd: #### Skipping IP addresses and Ports ####
Jan 23 15:44:48 ldap-prod freeradius[2345]: Configuration appears to be OK
Jan 23 15:44:48 ldap-prod systemd[1]: Started FreeRADIUS multi-protocol policy server.
Feb 05 13:47:05 ldap-prod systemd[1]: Stopping FreeRADIUS multi-protocol policy server...
Feb 05 13:47:05 ldap-prod systemd[1]: freeradius.service: Deactivated successfully.
Feb 05 13:47:05 ldap-prod systemd[1]: Stopped FreeRADIUS multi-protocol policy server.
Feb 05 13:47:05 ldap-prod systemd[1]: freeradius.service: Consumed 4.057s CPU time.
FreeRADIUS Version 3.0.26
Copyright (C) 1999-2021 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/freeradius/3.0/dictionary
including configuration file /etc/freeradius/3.0/radiusd.conf
including configuration file /etc/freeradius/3.0/proxy.conf
including configuration file /etc/freeradius/3.0/clients.conf
including files in directory /etc/freeradius/3.0/mods-enabled/
including configuration file /etc/freeradius/3.0/mods-enabled/replicate
including configuration file /etc/freeradius/3.0/mods-enabled/pap
including configuration file /etc/freeradius/3.0/mods-enabled/digest
including configuration file /etc/freeradius/3.0/mods-enabled/detail
including configuration file /etc/freeradius/3.0/mods-enabled/unpack
including configuration file /etc/freeradius/3.0/mods-enabled/always
including configuration file /etc/freeradius/3.0/mods-enabled/files
including configuration file /etc/freeradius/3.0/mods-enabled/expiration
including configuration file /etc/freeradius/3.0/mods-enabled/unix
including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter
including configuration file /etc/freeradius/3.0/mods-enabled/detail.log
including configuration file /etc/freeradius/3.0/mods-enabled/linelog
including configuration file /etc/freeradius/3.0/mods-enabled/chap
including configuration file /etc/freeradius/3.0/mods-enabled/exec
including configuration file /etc/freeradius/3.0/mods-enabled/expr
including configuration file /etc/freeradius/3.0/mods-enabled/radutmp
including configuration file /etc/freeradius/3.0/mods-enabled/ldap
including configuration file /etc/freeradius/3.0/mods-enabled/soh
including configuration file /etc/freeradius/3.0/mods-enabled/passwd
including configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clients
including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap
including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp
including configuration file /etc/freeradius/3.0/mods-enabled/mschap
including configuration file /etc/freeradius/3.0/mods-enabled/realm
including configuration file /etc/freeradius/3.0/mods-enabled/echo
including configuration file /etc/freeradius/3.0/mods-enabled/logintime
including configuration file /etc/freeradius/3.0/mods-enabled/utf8
including configuration file /etc/freeradius/3.0/mods-enabled/eap
including configuration file /etc/freeradius/3.0/mods-enabled/preprocess
including files in directory /etc/freeradius/3.0/policy.d/
including configuration file /etc/freeradius/3.0/policy.d/filter
including configuration file /etc/freeradius/3.0/policy.d/operator-name
including configuration file /etc/freeradius/3.0/policy.d/abfab-tr
including configuration file /etc/freeradius/3.0/policy.d/cui
including configuration file /etc/freeradius/3.0/policy.d/moonshot-targeted-ids
including configuration file /etc/freeradius/3.0/policy.d/canonicalization
including configuration file /etc/freeradius/3.0/policy.d/accounting
including configuration file /etc/freeradius/3.0/policy.d/control
including configuration file /etc/freeradius/3.0/policy.d/debug
including configuration file /etc/freeradius/3.0/policy.d/dhcp
including configuration file /etc/freeradius/3.0/policy.d/rfc7542
including configuration file /etc/freeradius/3.0/policy.d/eap
including files in directory /etc/freeradius/3.0/sites-enabled/
including configuration file /etc/freeradius/3.0/sites-enabled/default
including configuration file /etc/freeradius/3.0/sites-enabled/inner-tunnel
main {
 security {
 	user = "freerad"
 	group = "freerad"
 	allow_core_dumps = no
 }
	name = "freeradius"
	prefix = "/usr"
	localstatedir = "/var"
	logdir = "/var/log/freeradius"
	run_dir = "/var/run/freeradius"
}
main {
	name = "freeradius"
	prefix = "/usr"
	localstatedir = "/var"
	sbindir = "/usr/sbin"
	logdir = "/var/log/freeradius"
	run_dir = "/var/run/freeradius"
	libdir = "/usr/lib/freeradius"
	radacctdir = "/var/log/freeradius/radacct"
	hostname_lookups = no
	max_request_time = 30
	cleanup_delay = 5
	max_requests = 16384
	postauth_client_lost = no
	pidfile = "/var/run/freeradius/freeradius.pid"
	checkrad = "/usr/sbin/checkrad"
	debug_level = 0
	proxy_requests = yes
 log {
 	stripped_names = no
 	auth = no
 	auth_badpass = no
 	auth_goodpass = no
 	colourise = yes
 	msg_denied = "You are already logged in - access denied"
 }
 resources {
 }
 security {
 	max_attributes = 200
 	reject_delay = 1.000000
 	status_server = yes
 }
}
radiusd: #### Loading Realms and Home Servers ####
 proxy server {
 	retry_delay = 5
 	retry_count = 3
 	default_fallback = no
 	dead_time = 120
 	wake_all_if_all_dead = no
 }
 home_server localhost {
 	ipaddr = 127.0.0.1
 	port = 1812
 	type = "auth"
 	secret = <<< secret >>>
 	response_window = 20.000000
 	response_timeouts = 1
 	max_outstanding = 65536
 	zombie_period = 40
 	status_check = "status-server"
 	ping_interval = 30
 	check_interval = 30
 	check_timeout = 4
 	num_answers_to_alive = 3
 	revive_interval = 120
  limit {
  	max_connections = 16
  	max_requests = 0
  	lifetime = 0
  	idle_timeout = 0
  }
  coa {
  	irt = 2
  	mrt = 16
  	mrc = 5
  	mrd = 30
  }
 }
 home_server_pool my_auth_failover {
	type = fail-over
	home_server = localhost
 }
 realm example.com {
	auth_pool = my_auth_failover
 }
 realm LOCAL {
 }
radiusd: #### Loading Clients ####
 client HUB-forti {
 	ipaddr = 10.255.0.1/32
 	require_message_authenticator = no
 	secret = <<< secret >>>
  limit {
  	max_connections = 50
  	lifetime = 45
  	idle_timeout = 30
  }
 }
 client HUB-OVH-PCC {
 	ipaddr = 10.100.11.254/32
 	require_message_authenticator = no
 	secret = <<< secret >>>
  limit {
  	max_connections = 50
  	lifetime = 45
  	idle_timeout = 30
  }
 }
 client BXL-net {
 	ipaddr = 10.5.0.0/22
 	require_message_authenticator = no
 	secret = <<< secret >>>
  limit {
  	max_connections = 50
  	lifetime = 45
  	idle_timeout = 30
  }
 }
 client LGE-net {
 	ipaddr = 10.4.0.0/22
 	require_message_authenticator = no
 	secret = <<< secret >>>
  limit {
  	max_connections = 50
  	lifetime = 45
  	idle_timeout = 30
  }
 }
 client PAR-net {
 	ipaddr = 10.6.0.0/22
 	require_message_authenticator = no
 	secret = <<< secret >>>
  limit {
  	max_connections = 50
  	lifetime = 45
  	idle_timeout = 30
  }
 }
 client GDN-net {
 	ipaddr = 10.8.0.0/22
 	require_message_authenticator = no
 	secret = <<< secret >>>
  limit {
  	max_connections = 50
  	lifetime = 45
  	idle_timeout = 30
  }
 }
 client localhost {
 	ipaddr = 127.0.0.1
 	require_message_authenticator = no
 	secret = <<< secret >>>
 	nas_type = "other"
 	proto = "*"
  limit {
  	max_connections = 16
  	lifetime = 0
  	idle_timeout = 30
  }
 }
 client localhost_ipv6 {
 	ipv6addr = ::1
 	require_message_authenticator = no
 	secret = <<< secret >>>
  limit {
  	max_connections = 16
  	lifetime = 0
  	idle_timeout = 30
  }
 }
Debugger not attached
systemd watchdog is disabled
 # Creating Auth-Type = eap
 # Creating Auth-Type = PAP
 # Creating Auth-Type = LDAP
 # Creating Auth-Type = mschap
 # Creating Auth-Type = CHAP
 # Creating Auth-Type = MS-CHAP
radiusd: #### Instantiating modules ####
 modules {
  # Loaded module rlm_replicate
  # Loading module "replicate" from file /etc/freeradius/3.0/mods-enabled/replicate
  # Loaded module rlm_pap
  # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap
  pap {
  	normalise = yes
  }
  # Loaded module rlm_digest
  # Loading module "digest" from file /etc/freeradius/3.0/mods-enabled/digest
  # Loaded module rlm_detail
  # Loading module "detail" from file /etc/freeradius/3.0/mods-enabled/detail
  detail {
  	filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
  	header = "%t"
  	permissions = 384
  	locking = no
  	escape_filenames = no
  	log_packet_header = no
  }
  # Loaded module rlm_unpack
  # Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack
  # Loaded module rlm_always
  # Loading module "reject" from file /etc/freeradius/3.0/mods-enabled/always
  always reject {
  	rcode = "reject"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always
  always fail {
  	rcode = "fail"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always
  always ok {
  	rcode = "ok"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "handled" from file /etc/freeradius/3.0/mods-enabled/always
  always handled {
  	rcode = "handled"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "invalid" from file /etc/freeradius/3.0/mods-enabled/always
  always invalid {
  	rcode = "invalid"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "userlock" from file /etc/freeradius/3.0/mods-enabled/always
  always userlock {
  	rcode = "userlock"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "notfound" from file /etc/freeradius/3.0/mods-enabled/always
  always notfound {
  	rcode = "notfound"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always
  always noop {
  	rcode = "noop"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "updated" from file /etc/freeradius/3.0/mods-enabled/always
  always updated {
  	rcode = "updated"
  	simulcount = 0
  	mpp = no
  }
  # Loaded module rlm_files
  # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files
  files {
  	filename = "/etc/freeradius/3.0/mods-config/files/authorize"
  	acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting"
  	preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy"
  }
  # Loaded module rlm_expiration
  # Loading module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration
  # Loaded module rlm_unix
  # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix
  unix {
  	radwtmp = "/var/log/freeradius/radwtmp"
  }
Creating attribute Unix-Group
  # Loaded module rlm_attr_filter
  # Loading module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.post-proxy {
  	filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy"
  	key = "%{Realm}"
  	relaxed = no
  }
  # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.pre-proxy {
  	filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy"
  	key = "%{Realm}"
  	relaxed = no
  }
  # Loading module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.access_reject {
  	filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject"
  	key = "%{User-Name}"
  	relaxed = no
  }
  # Loading module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.access_challenge {
  	filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge"
  	key = "%{User-Name}"
  	relaxed = no
  }
  # Loading module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.accounting_response {
  	filename = "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response"
  	key = "%{User-Name}"
  	relaxed = no
  }
  # Loading module "attr_filter.coa" from file /etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.coa {
  	filename = "/etc/freeradius/3.0/mods-config/attr_filter/coa"
  	key = "%{User-Name}"
  	relaxed = no
  }
  # Loading module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
  detail auth_log {
  	filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
  	header = "%t"
  	permissions = 384
  	locking = no
  	escape_filenames = no
  	log_packet_header = no
  }
  # Loading module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
  detail reply_log {
  	filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
  	header = "%t"
  	permissions = 384
  	locking = no
  	escape_filenames = no
  	log_packet_header = no
  }
  # Loading module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
  detail pre_proxy_log {
  	filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
  	header = "%t"
  	permissions = 384
  	locking = no
  	escape_filenames = no
  	log_packet_header = no
  }
  # Loading module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
  detail post_proxy_log {
  	filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
  	header = "%t"
  	permissions = 384
  	locking = no
  	escape_filenames = no
  	log_packet_header = no
  }
  # Loaded module rlm_linelog
  # Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog
  linelog {
  	filename = "/var/log/freeradius/linelog"
  	escape_filenames = no
  	syslog_severity = "info"
  	permissions = 384
  	format = "This is a log message for %{User-Name}"
  	reference = "messages.%{%{reply:Packet-Type}:-default}"
  }
  # Loading module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog
  linelog log_accounting {
  	filename = "/var/log/freeradius/linelog-accounting"
  	escape_filenames = no
  	syslog_severity = "info"
  	permissions = 384
  	format = ""
  	reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
  }
  # Loaded module rlm_chap
  # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap
  # Loaded module rlm_exec
  # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec
  exec {
  	wait = no
  	input_pairs = "request"
  	shell_escape = yes
  	timeout = 10
  }
  # Loaded module rlm_expr
  # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr
  expr {
  	safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
  }
  # Loaded module rlm_radutmp
  # Loading module "radutmp" from file /etc/freeradius/3.0/mods-enabled/radutmp
  radutmp {
  	filename = "/var/log/freeradius/radutmp"
  	username = "%{User-Name}"
  	case_sensitive = yes
  	check_with_nas = yes
  	permissions = 384
  	caller_id = yes
  }
  # Loaded module rlm_ldap
  # Loading module "ldap" from file /etc/freeradius/3.0/mods-enabled/ldap
  ldap {
  	server = "ldaps://10.100.11.20"
  	port = 636
  	identity = "uid=proxyagent,ou=users,dc=anonymized,dc=com"
  	password = <<< secret >>>
   sasl {
   }
   user {
   	scope = "sub"
   	access_positive = yes
    sasl {
    }
   }
   group {
   	filter = "(objectClass=posixGroup)"
   	scope = "sub"
   	name_attribute = "cn"
   	membership_attribute = "memberOf"
   	cacheable_name = no
   	cacheable_dn = no
   	allow_dangling_group_ref = no
   }
   client {
   	filter = "(objectClass=radiusClient)"
   	scope = "sub"
   	base_dn = "ou=%{tapp-ldap},dc=anonymized,dc=com"
   }
   profile {
   }
   options {
   	ldap_debug = 40
   	chase_referrals = yes
   	rebind = yes
   	net_timeout = 5
   	res_timeout = 10
   	srv_timelimit = 10
   	idle = 60
   	probes = 3
   	interval = 3
   }
   tls {
   	start_tls = no
   }
  }
Creating attribute LDAP-Group
  # Loaded module rlm_soh
  # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh
  soh {
  	dhcp = yes
  }
  # Loaded module rlm_passwd
  # Loading module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd
  passwd etc_passwd {
  	filename = "/etc/passwd"
  	format = "*User-Name:Crypt-Password:"
  	delimiter = ":"
  	ignore_nislike = no
  	ignore_empty = yes
  	allow_multiple_keys = no
  	hash_size = 100
  }
  # Loaded module rlm_dynamic_clients
  # Loading module "dynamic_clients" from file /etc/freeradius/3.0/mods-enabled/dynamic_clients
  # Loaded module rlm_cache
  # Loading module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap
  cache cache_eap {
  	driver = "rlm_cache_rbtree"
  	key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
  	ttl = 15
  	max_entries = 0
  	epoch = 0
  	add_stats = no
  }
  # Loading module "sradutmp" from file /etc/freeradius/3.0/mods-enabled/sradutmp
  radutmp sradutmp {
  	filename = "/var/log/freeradius/sradutmp"
  	username = "%{User-Name}"
  	case_sensitive = yes
  	check_with_nas = yes
  	permissions = 420
  	caller_id = no
  }
  # Loaded module rlm_mschap
  # Loading module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap
  mschap {
  	use_mppe = yes
  	require_encryption = no
  	require_strong = no
  	with_ntdomain_hack = yes
   passchange {
   }
  	allow_retry = yes
  	winbind_retry_with_normalised_username = no
  }
  # Loaded module rlm_realm
  # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm
  realm IPASS {
  	format = "prefix"
  	delimiter = "/"
  	ignore_default = no
  	ignore_null = no
  }
  # Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm
  realm suffix {
  	format = "suffix"
  	delimiter = "@"
  	ignore_default = no
  	ignore_null = no
  }
  # Loading module "bangpath" from file /etc/freeradius/3.0/mods-enabled/realm
  realm bangpath {
  	format = "prefix"
  	delimiter = "!"
  	ignore_default = no
  	ignore_null = no
  }
  # Loading module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm
  realm realmpercent {
  	format = "suffix"
  	delimiter = "%"
  	ignore_default = no
  	ignore_null = no
  }
  # Loading module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm
  realm ntdomain {
  	format = "prefix"
  	delimiter = "\\"
  	ignore_default = no
  	ignore_null = no
  }
  # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo
  exec echo {
  	wait = yes
  	program = "/bin/echo %{User-Name}"
  	input_pairs = "request"
  	output_pairs = "reply"
  	shell_escape = yes
  }
  # Loaded module rlm_logintime
  # Loading module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime
  logintime {
  	minimum_timeout = 60
  }
  # Loaded module rlm_utf8
  # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8
  # Loaded module rlm_eap
  # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap
  eap {
  	default_eap_type = "ttls"
  	timer_expire = 60
  	ignore_unknown_eap_types = no
  	cisco_accounting_username_bug = no
  	max_sessions = 16384
  }
  # Loaded module rlm_preprocess
  # Loading module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess
  preprocess {
  	huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups"
  	hints = "/etc/freeradius/3.0/mods-config/preprocess/hints"
  	with_ascend_hack = no
  	ascend_channels_per_line = 23
  	with_ntdomain_hack = no
  	with_specialix_jetstream_hack = no
  	with_cisco_vsa_hack = no
  	with_alvarion_vsa_hack = no
  }
  instantiate {
  }
  # Instantiating module "pap" from file /etc/freeradius/3.0/mods-enabled/pap
  # Instantiating module "detail" from file /etc/freeradius/3.0/mods-enabled/detail
  # Instantiating module "reject" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "fail" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "ok" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "handled" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "invalid" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "userlock" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "notfound" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "noop" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "updated" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "files" from file /etc/freeradius/3.0/mods-enabled/files
reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize
reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting
reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy
  # Instantiating module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration
  # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy
  # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy
  # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_reject
  # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_challenge
  # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/accounting_response
  # Instantiating module "attr_filter.coa" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/coa
  # Instantiating module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output
  # Instantiating module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
  # Instantiating module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
  # Instantiating module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
  # Instantiating module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog
  # Instantiating module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog
/etc/freeradius/3.0/mods-enabled/ldap[314]: Found dynamic expansion in string which will not be dynamically expanded
  # Instantiating module "ldap" from file /etc/freeradius/3.0/mods-enabled/ldap
rlm_ldap: libldap vendor: OpenLDAP, version: 20516
   accounting {
   	reference = "%{tolower:type.%{Acct-Status-Type}}"
   }
   post-auth {
   	reference = "."
   }
rlm_ldap (ldap): Initialising connection pool
   pool {
   	start = 5
   	min = 3
   	max = 32
   	spare = 10
   	uses = 0
   	lifetime = 0
   	cleanup_interval = 30
   	idle_timeout = 60
   	retry_delay = 30
   	spread = no
   }
rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots used
rlm_ldap (ldap): Connecting to ldaps://10.100.11.20:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots used
rlm_ldap (ldap): Connecting to ldaps://10.100.11.20:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots used
rlm_ldap (ldap): Connecting to ldaps://10.100.11.20:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots used
rlm_ldap (ldap): Connecting to ldaps://10.100.11.20:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots used
rlm_ldap (ldap): Connecting to ldaps://10.100.11.20:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
  # Instantiating module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
  # Instantiating module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap
rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked
  # Instantiating module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap
rlm_mschap (mschap): using internal authentication
  # Instantiating module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "bangpath" from file /etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime
  # Instantiating module "eap" from file /etc/freeradius/3.0/mods-enabled/eap
   # Linked to sub-module rlm_eap_md5
rlm_eap (EAP): Ignoring EAP method 'leap', because it is no longer supported
   # Linked to sub-module rlm_eap_gtc
   gtc {
   	challenge = "Password: "
   	auth_type = "PAP"
   }
   # Linked to sub-module rlm_eap_tls
   tls {
   	tls = "tls-common"
   }
   tls-config tls-common {
   	verify_depth = 0
   	ca_path = "/etc/freeradius/3.0/certs"
   	pem_file_type = yes
   	private_key_file = "/etc/ldap/sasl2/ldap.in.anonymized.com.rad.key"
   	certificate_file = "/etc/ldap/sasl2/ldap.in.anonymized.com.cert.pem"
   	ca_file = "/etc/ldap/sasl2/ldap.in.anonymized.com.intermediate-cert.pem"
   	dh_file = "/etc/freeradius/3.0/certs/dh"
   	fragment_size = 1024
   	include_length = yes
   	auto_chain = yes
   	check_crl = no
   	check_all_crl = no
   	ca_path_reload_interval = 0
   	cipher_list = "DEFAULT"
   	cipher_server_preference = no
   	reject_unknown_intermediate_ca = no
   	ecdh_curve = "prime256v1"
   	tls_min_version = "1.2"
    cache {
    	enable = no
    	lifetime = 24
    	max_entries = 255
    }
    verify {
    	skip_if_ocsp_ok = no
    }
    ocsp {
    	enable = no
    	override_cert_url = yes
    	url = "http://127.0.0.1/ocsp/"
    	use_nonce = yes
    	timeout = 0
    	softfail = no
    }
   }
tls: Setting DH parameters from /etc/freeradius/3.0/certs/dh - this is no longer necessary.
tls: You should comment out the 'dh_file' configuration item.
   # Linked to sub-module rlm_eap_ttls
   ttls {
   	tls = "tls-common"
   	default_eap_type = "md5"
   	copy_request_to_tunnel = no
   	use_tunneled_reply = no
   	virtual_server = "inner-tunnel"
   	include_length = yes
   	require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_peap
   peap {
   	tls = "tls-common"
   	default_eap_type = "mschapv2"
   	copy_request_to_tunnel = no
   	use_tunneled_reply = no
   	proxy_tunneled_request_as_eap = yes
   	virtual_server = "inner-tunnel"
   	soh = no
   	require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_mschapv2
   mschapv2 {
   	with_ntdomain_hack = no
   	send_error = no
   }
  # Instantiating module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess
reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups
reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints
 } # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/freeradius/3.0/radiusd.conf
} # server
server default { # from file /etc/freeradius/3.0/sites-enabled/default
 # Loading authenticate {...}
Compiling Auth-Type PAP for attr Auth-Type
Compiling Auth-Type LDAP for attr Auth-Type
 # Loading authorize {...}
Ignoring "sql" (see raddb/mods-available/README.rst)
 # Loading preacct {...}
 # Loading accounting {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
Compiling Post-Auth-Type REJECT for attr Post-Auth-Type
Compiling Post-Auth-Type Challenge for attr Post-Auth-Type
} # server default
server inner-tunnel { # from file /etc/freeradius/3.0/sites-enabled/inner-tunnel
 # Loading authenticate {...}
Compiling Auth-Type PAP for attr Auth-Type
Compiling Auth-Type CHAP for attr Auth-Type
Compiling Auth-Type MS-CHAP for attr Auth-Type
 # Loading authorize {...}
 # Loading session {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
 # Skipping contents of 'if' as it is always 'false' -- /etc/freeradius/3.0/sites-enabled/inner-tunnel:349
Compiling Post-Auth-Type REJECT for attr Post-Auth-Type
} # server inner-tunnel
 thread pool {
 	start_servers = 5
 	max_servers = 32
 	min_spare_servers = 3
 	max_spare_servers = 10
 	max_requests_per_server = 0
 	cleanup_delay = 5
 	max_queue_size = 65536
 	auto_limit_acct = no
 }
Thread spawned new child 1. Total threads in pool: 1
Thread 1 waiting to be assigned a request
Thread spawned new child 2. Total threads in pool: 2
Thread spawned new child 3. Total threads in pool: 3
Thread 2 waiting to be assigned a request
Thread 3 waiting to be assigned a request
Thread spawned new child 4. Total threads in pool: 4
Thread spawned new child 5. Total threads in pool: 5
Thread pool initialized
Thread 4 waiting to be assigned a request
radiusd: #### Opening IP addresses and Ports ####
Thread 5 waiting to be assigned a request
listen {
  	type = "auth"
  	ipaddr = *
  	port = 0
   limit {
   	max_connections = 16
   	lifetime = 0
   	idle_timeout = 30
   }
}
listen {
  	type = "acct"
  	ipaddr = *
  	port = 0
   limit {
   	max_connections = 16
   	lifetime = 0
   	idle_timeout = 30
   }
}
listen {
  	type = "auth"
  	ipv6addr = ::
  	port = 0
   limit {
   	max_connections = 16
   	lifetime = 0
   	idle_timeout = 30
   }
}
listen {
  	type = "acct"
  	ipv6addr = ::
  	port = 0
   limit {
   	max_connections = 16
   	lifetime = 0
   	idle_timeout = 30
   }
}
listen {
  	type = "auth"
  	ipaddr = 127.0.0.1
  	port = 18120
}
Listening on auth address * port 1812 bound to server default
Listening on acct address * port 1813 bound to server default
Listening on auth address :: port 1812 bound to server default
Listening on acct address :: port 1813 bound to server default
Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
Listening on proxy address * port 43734
Listening on proxy address :: port 47515
Ready to process requests
Threads: total/active/spare threads = 5/0/5
Waking up in 0.3 seconds.
Thread 2 got semaphore
Thread 2 handling request 0, (1 handled so far)
(0) Received Access-Request Id 0 from 10.8.1.6:59971 to 10.100.11.22:1812 length 219
(0)   User-Name = "cza"
(0)   NAS-IP-Address = 10.8.1.6
(0)   NAS-Identifier = "d2fbe4c2d34e"
(0)   Called-Station-Id = "D2-FB-E4-C2-D3-4E:anonymized-fr30"
(0)   NAS-Port-Type = Wireless-802.11
(0)   Service-Type = Framed-User
(0)   Calling-Station-Id = "F0-18-98-08-86-BB"
(0)   Connect-Info = "CONNECT 0Mbps 802.11b"
(0)   Acct-Session-Id = "875E51A747B94C9E"
(0)   Acct-Multi-Session-Id = "36FC722677D9A1F9"
(0)   WLAN-Pairwise-Cipher = 1027076
(0)   WLAN-Group-Cipher = 1027076
(0)   WLAN-AKM-Suite = 1027073
(0)   Framed-MTU = 1002
(0)   EAP-Message = 0x028a000801637a61
(0)   Message-Authenticator = 0x441ec7714e80a5f27661d2acc2a843ae
(0) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(0)   authorize {
(0)     policy rewrite_called_station_id {
(0)       if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) {
(0)       if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))  -> TRUE
(0)       if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))  {
(0)         update request {
(0)           EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}}
(0)              --> D2-FB-E4-C2-D3-4E
(0)           &Called-Station-Id := D2-FB-E4-C2-D3-4E
(0)         } # update request = noop
(0)         if ("%{8}") {
(0)         EXPAND %{8}
(0)            --> anonymized-fr30
(0)         if ("%{8}")  -> TRUE
(0)         if ("%{8}")  {
(0)           update request {
(0)             EXPAND %{8}
(0)                --> anonymized-fr30
(0)             &Called-Station-SSID := anonymized-fr30
(0)           } # update request = noop
(0)         } # if ("%{8}")  = noop
(0)         [updated] = updated
(0)       } # if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))  = updated
(0)       ... skipping else: Preceding "if" was taken
(0)     } # policy rewrite_called_station_id = updated
(0)     if (&Called-Station-SSID == 'anonymized Corp Device') {
(0)     if (&Called-Station-SSID == 'anonymized Corp Device')  -> FALSE
(0)     else {
(0)       update request {
(0)         tapp-ldap = "users"
(0)       } # update request = noop
(0)     } # else = noop
(0)     policy filter_username {
(0)       if (&User-Name) {
(0)       if (&User-Name)  -> TRUE
(0)       if (&User-Name)  {
(0)         if (&User-Name =~ / /) {
(0)         if (&User-Name =~ / /)  -> FALSE
(0)         if (&User-Name =~ /@[^@]*@/ ) {
(0)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(0)         if (&User-Name =~ /\.\./ ) {
(0)         if (&User-Name =~ /\.\./ )  -> FALSE
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(0)         if (&User-Name =~ /\.$/)  {
(0)         if (&User-Name =~ /\.$/)   -> FALSE
(0)         if (&User-Name =~ /@\./)  {
(0)         if (&User-Name =~ /@\./)   -> FALSE
(0)       } # if (&User-Name)  = updated
(0)     } # policy filter_username = updated
(0)     [preprocess] = ok
(0)     [chap] = noop
(0)     [mschap] = noop
(0)     [digest] = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: No '@' in User-Name = "cza", looking up realm NULL
(0) suffix: No such realm "NULL"
(0)     [suffix] = noop
(0) eap: Peer sent EAP Response (code 2) ID 138 length 8
(0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize
(0)     [eap] = ok
(0)   } # authorize = ok
(0) Found Auth-Type = eap
(0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(0)   authenticate {
(0) eap: Peer sent packet with method EAP Identity (1)
(0) eap: Calling submodule eap_ttls to process data
(0) eap_ttls: (TLS) Initiating new session
(0) eap: Sending EAP Request (code 1) ID 139 length 6
(0) eap: EAP session adding &reply:State = 0x0eefef3d0e64faa7
(0)     [eap] = handled
(0)   } # authenticate = handled
(0) Using Post-Auth-Type Challenge
(0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(0)   Challenge { ... } # empty sub-section is ignored
(0) session-state: Saving cached attributes
(0)   Framed-MTU = 994
(0) Sent Access-Challenge Id 0 from 10.100.11.22:1812 to 10.8.1.6:59971 length 64
(0)   EAP-Message = 0x018b00061520
(0)   Message-Authenticator = 0x00000000000000000000000000000000
(0)   State = 0x0eefef3d0e64faa75750d418f9278958
(0) Finished request
Thread 2 waiting to be assigned a request
Waking up in 0.2 seconds.
Thread 1 got semaphore
Thread 1 handling request 1, (1 handled so far)
(1) Received Access-Request Id 1 from 10.8.1.6:59971 to 10.100.11.22:1812 length 390
(1)   User-Name = "cza"
(1)   NAS-IP-Address = 10.8.1.6
(1)   NAS-Identifier = "d2fbe4c2d34e"
(1)   Called-Station-Id = "D2-FB-E4-C2-D3-4E:anonymized-fr30"
(1)   NAS-Port-Type = Wireless-802.11
(1)   Service-Type = Framed-User
(1)   Calling-Station-Id = "F0-18-98-08-86-BB"
(1)   Connect-Info = "CONNECT 0Mbps 802.11b"
(1)   Acct-Session-Id = "875E51A747B94C9E"
(1)   Acct-Multi-Session-Id = "36FC722677D9A1F9"
(1)   WLAN-Pairwise-Cipher = 1027076
(1)   WLAN-Group-Cipher = 1027076
(1)   WLAN-AKM-Suite = 1027073
(1)   Framed-MTU = 1002
(1)   EAP-Message = 0x028b00a115800000009716030100920100008e030365c3856df50bbcfe7bece83e6b7297497730ce5b6386a5e19fb5222617b5fe3c00002c00ffc02cc02bc024c023c00ac009c008c030c02fc028c027c014c013c012009d009c003d003c0035002f000a01000039000a00080006001700180019000b00020100000d00120010040102010501060104030203050306030005000501000000000012000000170000
(1)   State = 0x0eefef3d0e64faa75750d418f9278958
(1)   Message-Authenticator = 0xa4038f0a97ff70e5428031421b6bd20e
(1) Restoring &session-state
(1)   &session-state:Framed-MTU = 994
(1) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(1)   authorize {
(1)     policy rewrite_called_station_id {
(1)       if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) {
(1)       if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))  -> TRUE
(1)       if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))  {
(1)         update request {
(1)           EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}}
(1)              --> D2-FB-E4-C2-D3-4E
(1)           &Called-Station-Id := D2-FB-E4-C2-D3-4E
(1)         } # update request = noop
(1)         if ("%{8}") {
(1)         EXPAND %{8}
(1)            --> anonymized-fr30
(1)         if ("%{8}")  -> TRUE
(1)         if ("%{8}")  {
(1)           update request {
(1)             EXPAND %{8}
(1)                --> anonymized-fr30
(1)             &Called-Station-SSID := anonymized-fr30
(1)           } # update request = noop
(1)         } # if ("%{8}")  = noop
(1)         [updated] = updated
(1)       } # if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))  = updated
(1)       ... skipping else: Preceding "if" was taken
(1)     } # policy rewrite_called_station_id = updated
(1)     if (&Called-Station-SSID == 'anonymized Corp Device') {
(1)     if (&Called-Station-SSID == 'anonymized Corp Device')  -> FALSE
(1)     else {
(1)       update request {
(1)         tapp-ldap = "users"
(1)       } # update request = noop
(1)     } # else = noop
(1)     policy filter_username {
(1)       if (&User-Name) {
(1)       if (&User-Name)  -> TRUE
(1)       if (&User-Name)  {
(1)         if (&User-Name =~ / /) {
(1)         if (&User-Name =~ / /)  -> FALSE
(1)         if (&User-Name =~ /@[^@]*@/ ) {
(1)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(1)         if (&User-Name =~ /\.\./ ) {
(1)         if (&User-Name =~ /\.\./ )  -> FALSE
(1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(1)         if (&User-Name =~ /\.$/)  {
(1)         if (&User-Name =~ /\.$/)   -> FALSE
(1)         if (&User-Name =~ /@\./)  {
(1)         if (&User-Name =~ /@\./)   -> FALSE
(1)       } # if (&User-Name)  = updated
(1)     } # policy filter_username = updated
(1)     [preprocess] = ok
(1)     [chap] = noop
(1)     [mschap] = noop
(1)     [digest] = noop
(1) suffix: Checking for suffix after "@"
(1) suffix: No '@' in User-Name = "cza", looking up realm NULL
(1) suffix: No such realm "NULL"
(1)     [suffix] = noop
(1) eap: Peer sent EAP Response (code 2) ID 139 length 161
(1) eap: Continuing tunnel setup
(1)     [eap] = ok
(1)   } # authorize = ok
(1) Found Auth-Type = eap
(1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(1)   authenticate {
(1) eap: Expiring EAP session with state 0x0eefef3d0e64faa7
(1) eap: Finished EAP session with state 0x0eefef3d0e64faa7
(1) eap: Previous EAP request found for state 0x0eefef3d0e64faa7, released from the list
(1) eap: Peer sent packet with method EAP TTLS (21)
(1) eap: Calling submodule eap_ttls to process data
(1) eap_ttls: Authenticate
(1) eap_ttls: (TLS) EAP Peer says that the final record size will be 151 bytes
(1) eap_ttls: (TLS) EAP Got all data (151 bytes)
(1) eap_ttls: (TLS) Handshake state - before SSL initialization
(1) eap_ttls: (TLS) Handshake state - Server before SSL initialization
(1) eap_ttls: (TLS) Handshake state - Server before SSL initialization
(1) eap_ttls: (TLS) recv TLS 1.3 Handshake, ClientHello
(1) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS read client hello
(1) eap_ttls: (TLS) send TLS 1.2 Handshake, ServerHello
(1) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS write server hello
(1) eap_ttls: (TLS) send TLS 1.2 Handshake, Certificate
(1) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS write certificate
(1) eap_ttls: (TLS) send TLS 1.2 Handshake, ServerKeyExchange
(1) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS write key exchange
(1) eap_ttls: (TLS) send TLS 1.2 Handshake, ServerHelloDone
(1) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS write server done
(1) eap_ttls: (TLS) Server : Need to read more data: SSLv3/TLS write server done
(1) eap_ttls: (TLS) In Handshake Phase
(1) eap: Sending EAP Request (code 1) ID 140 length 1004
(1) eap: EAP session adding &reply:State = 0x0eefef3d0f63faa7
(1)     [eap] = handled
(1)   } # authenticate = handled
(1) Using Post-Auth-Type Challenge
(1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(1)   Challenge { ... } # empty sub-section is ignored
(1) session-state: Saving cached attributes
(1)   Framed-MTU = 994
(1)   TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello"
(1)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello"
(1)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate"
(1)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange"
(1)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone"
(1) Sent Access-Challenge Id 1 from 10.100.11.22:1812 to 10.8.1.6:59971 length 1068
(1)   EAP-Message = 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
(1)   Message-Authenticator = 0x00000000000000000000000000000000
(1)   State = 0x0eefef3d0f63faa75750d418f9278958
(1) Finished request
Thread 1 waiting to be assigned a request
Waking up in 0.2 seconds.
Thread 4 got semaphore
Thread 4 handling request 2, (1 handled so far)
(2) Received Access-Request Id 2 from 10.8.1.6:59971 to 10.100.11.22:1812 length 235
(2)   User-Name = "cza"
(2)   NAS-IP-Address = 10.8.1.6
(2)   NAS-Identifier = "d2fbe4c2d34e"
(2)   Called-Station-Id = "D2-FB-E4-C2-D3-4E:anonymized-fr30"
(2)   NAS-Port-Type = Wireless-802.11
(2)   Service-Type = Framed-User
(2)   Calling-Station-Id = "F0-18-98-08-86-BB"
(2)   Connect-Info = "CONNECT 0Mbps 802.11b"
(2)   Acct-Session-Id = "875E51A747B94C9E"
(2)   Acct-Multi-Session-Id = "36FC722677D9A1F9"
(2)   WLAN-Pairwise-Cipher = 1027076
(2)   WLAN-Group-Cipher = 1027076
(2)   WLAN-AKM-Suite = 1027073
(2)   Framed-MTU = 1002
(2)   EAP-Message = 0x028c00061500
(2)   State = 0x0eefef3d0f63faa75750d418f9278958
(2)   Message-Authenticator = 0x4e14cd41937bc7f036ab6ad8f6579294
(2) Restoring &session-state
(2)   &session-state:Framed-MTU = 994
(2)   &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello"
(2)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello"
(2)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate"
(2)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange"
(2)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone"
(2) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(2)   authorize {
(2)     policy rewrite_called_station_id {
(2)       if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) {
(2)       if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))  -> TRUE
(2)       if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))  {
(2)         update request {
(2)           EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}}
(2)              --> D2-FB-E4-C2-D3-4E
(2)           &Called-Station-Id := D2-FB-E4-C2-D3-4E
(2)         } # update request = noop
(2)         if ("%{8}") {
(2)         EXPAND %{8}
(2)            --> anonymized-fr30
(2)         if ("%{8}")  -> TRUE
(2)         if ("%{8}")  {
(2)           update request {
(2)             EXPAND %{8}
(2)                --> anonymized-fr30
(2)             &Called-Station-SSID := anonymized-fr30
(2)           } # update request = noop
(2)         } # if ("%{8}")  = noop
(2)         [updated] = updated
(2)       } # if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))  = updated
(2)       ... skipping else: Preceding "if" was taken
(2)     } # policy rewrite_called_station_id = updated
(2)     if (&Called-Station-SSID == 'anonymized Corp Device') {
(2)     if (&Called-Station-SSID == 'anonymized Corp Device')  -> FALSE
(2)     else {
(2)       update request {
(2)         tapp-ldap = "users"
(2)       } # update request = noop
(2)     } # else = noop
(2)     policy filter_username {
(2)       if (&User-Name) {
(2)       if (&User-Name)  -> TRUE
(2)       if (&User-Name)  {
(2)         if (&User-Name =~ / /) {
(2)         if (&User-Name =~ / /)  -> FALSE
(2)         if (&User-Name =~ /@[^@]*@/ ) {
(2)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(2)         if (&User-Name =~ /\.\./ ) {
(2)         if (&User-Name =~ /\.\./ )  -> FALSE
(2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(2)         if (&User-Name =~ /\.$/)  {
(2)         if (&User-Name =~ /\.$/)   -> FALSE
(2)         if (&User-Name =~ /@\./)  {
(2)         if (&User-Name =~ /@\./)   -> FALSE
(2)       } # if (&User-Name)  = updated
(2)     } # policy filter_username = updated
(2)     [preprocess] = ok
(2)     [chap] = noop
(2)     [mschap] = noop
(2)     [digest] = noop
(2) suffix: Checking for suffix after "@"
(2) suffix: No '@' in User-Name = "cza", looking up realm NULL
(2) suffix: No such realm "NULL"
(2)     [suffix] = noop
(2) eap: Peer sent EAP Response (code 2) ID 140 length 6
(2) eap: Continuing tunnel setup
(2)     [eap] = ok
(2)   } # authorize = ok
(2) Found Auth-Type = eap
(2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(2)   authenticate {
(2) eap: Expiring EAP session with state 0x0eefef3d0f63faa7
(2) eap: Finished EAP session with state 0x0eefef3d0f63faa7
(2) eap: Previous EAP request found for state 0x0eefef3d0f63faa7, released from the list
(2) eap: Peer sent packet with method EAP TTLS (21)
(2) eap: Calling submodule eap_ttls to process data
(2) eap_ttls: Authenticate
(2) eap_ttls: (TLS) Peer ACKed our handshake fragment
(2) eap: Sending EAP Request (code 1) ID 141 length 1004
(2) eap: EAP session adding &reply:State = 0x0eefef3d0c62faa7
(2)     [eap] = handled
(2)   } # authenticate = handled
(2) Using Post-Auth-Type Challenge
(2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(2)   Challenge { ... } # empty sub-section is ignored
(2) session-state: Saving cached attributes
(2)   Framed-MTU = 994
(2)   TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello"
(2)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello"
(2)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate"
(2)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange"
(2)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone"
(2) Sent Access-Challenge Id 2 from 10.100.11.22:1812 to 10.8.1.6:59971 length 1068
(2)   EAP-Message = 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
(2)   Message-Authenticator = 0x00000000000000000000000000000000
(2)   State = 0x0eefef3d0c62faa75750d418f9278958
(2) Finished request
Thread 4 waiting to be assigned a request
Waking up in 0.1 seconds.
Thread 3 got semaphore
Thread 3 handling request 3, (1 handled so far)
(3) Received Access-Request Id 3 from 10.8.1.6:59971 to 10.100.11.22:1812 length 235
(3)   User-Name = "cza"
(3)   NAS-IP-Address = 10.8.1.6
(3)   NAS-Identifier = "d2fbe4c2d34e"
(3)   Called-Station-Id = "D2-FB-E4-C2-D3-4E:anonymized-fr30"
(3)   NAS-Port-Type = Wireless-802.11
(3)   Service-Type = Framed-User
(3)   Calling-Station-Id = "F0-18-98-08-86-BB"
(3)   Connect-Info = "CONNECT 0Mbps 802.11b"
(3)   Acct-Session-Id = "875E51A747B94C9E"
(3)   Acct-Multi-Session-Id = "36FC722677D9A1F9"
(3)   WLAN-Pairwise-Cipher = 1027076
(3)   WLAN-Group-Cipher = 1027076
(3)   WLAN-AKM-Suite = 1027073
(3)   Framed-MTU = 1002
(3)   EAP-Message = 0x028d00061500
(3)   State = 0x0eefef3d0c62faa75750d418f9278958
(3)   Message-Authenticator = 0xf95a2d3f71abf251aca22339c968f71c
(3) Restoring &session-state
(3)   &session-state:Framed-MTU = 994
(3)   &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello"
(3)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello"
(3)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate"
(3)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange"
(3)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone"
(3) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(3)   authorize {
(3)     policy rewrite_called_station_id {
(3)       if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) {
(3)       if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))  -> TRUE
(3)       if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))  {
(3)         update request {
(3)           EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}}
(3)              --> D2-FB-E4-C2-D3-4E
(3)           &Called-Station-Id := D2-FB-E4-C2-D3-4E
(3)         } # update request = noop
(3)         if ("%{8}") {
(3)         EXPAND %{8}
(3)            --> anonymized-fr30
(3)         if ("%{8}")  -> TRUE
(3)         if ("%{8}")  {
(3)           update request {
(3)             EXPAND %{8}
(3)                --> anonymized-fr30
(3)             &Called-Station-SSID := anonymized-fr30
(3)           } # update request = noop
(3)         } # if ("%{8}")  = noop
(3)         [updated] = updated
(3)       } # if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))  = updated
(3)       ... skipping else: Preceding "if" was taken
(3)     } # policy rewrite_called_station_id = updated
(3)     if (&Called-Station-SSID == 'anonymized Corp Device') {
(3)     if (&Called-Station-SSID == 'anonymized Corp Device')  -> FALSE
(3)     else {
(3)       update request {
(3)         tapp-ldap = "users"
(3)       } # update request = noop
(3)     } # else = noop
(3)     policy filter_username {
(3)       if (&User-Name) {
(3)       if (&User-Name)  -> TRUE
(3)       if (&User-Name)  {
(3)         if (&User-Name =~ / /) {
(3)         if (&User-Name =~ / /)  -> FALSE
(3)         if (&User-Name =~ /@[^@]*@/ ) {
(3)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(3)         if (&User-Name =~ /\.\./ ) {
(3)         if (&User-Name =~ /\.\./ )  -> FALSE
(3)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(3)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(3)         if (&User-Name =~ /\.$/)  {
(3)         if (&User-Name =~ /\.$/)   -> FALSE
(3)         if (&User-Name =~ /@\./)  {
(3)         if (&User-Name =~ /@\./)   -> FALSE
(3)       } # if (&User-Name)  = updated
(3)     } # policy filter_username = updated
(3)     [preprocess] = ok
(3)     [chap] = noop
(3)     [mschap] = noop
(3)     [digest] = noop
(3) suffix: Checking for suffix after "@"
(3) suffix: No '@' in User-Name = "cza", looking up realm NULL
(3) suffix: No such realm "NULL"
(3)     [suffix] = noop
(3) eap: Peer sent EAP Response (code 2) ID 141 length 6
(3) eap: Continuing tunnel setup
(3)     [eap] = ok
(3)   } # authorize = ok
(3) Found Auth-Type = eap
(3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(3)   authenticate {
(3) eap: Expiring EAP session with state 0x0eefef3d0c62faa7
(3) eap: Finished EAP session with state 0x0eefef3d0c62faa7
(3) eap: Previous EAP request found for state 0x0eefef3d0c62faa7, released from the list
(3) eap: Peer sent packet with method EAP TTLS (21)
(3) eap: Calling submodule eap_ttls to process data
(3) eap_ttls: Authenticate
(3) eap_ttls: (TLS) Peer ACKed our handshake fragment
(3) eap: Sending EAP Request (code 1) ID 142 length 1004
(3) eap: EAP session adding &reply:State = 0x0eefef3d0d61faa7
(3)     [eap] = handled
(3)   } # authenticate = handled
(3) Using Post-Auth-Type Challenge
(3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(3)   Challenge { ... } # empty sub-section is ignored
(3) session-state: Saving cached attributes
(3)   Framed-MTU = 994
(3)   TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello"
(3)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello"
(3)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate"
(3)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange"
(3)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone"
(3) Sent Access-Challenge Id 3 from 10.100.11.22:1812 to 10.8.1.6:59971 length 1068
(3)   EAP-Message = 0x018e03ec15c000000ea761310b300906035504061302555331153013060355040a130c446967694365727420496e6331193017060355040b13107777772e64696769636572742e636f6d3120301e06035504031317446967694365727420476c6f62616c20526f6f74204732301e170d3137313130323132323433335a170d3237313130323132323433335a3060310b300906035504061302555331153013060355040a130c446967694365727420496e6331193017060355040b13107777772e64696769636572742e636f6d311f301d06035504031316526170696453534c20544c532052534120434120473130820122300d06092a864886f70d01010105000382010f003082010a0282010100bfb9592544123516e25d5049050ae0cbfc8dda25089a67a6a26d11e36a9fdaa7dcf2d5a60dae985eed871a3703283ec66f5c347e84d24ea3d81b80e6154cfabc81773ce08ef960a38789503836b249419ea9dac250caac7ad07904223cc837ed4b40b7d74e5a6ece
(3)   Message-Authenticator = 0x00000000000000000000000000000000
(3)   State = 0x0eefef3d0d61faa75750d418f9278958
(3) Finished request
Thread 3 waiting to be assigned a request
Waking up in 0.1 seconds.
Thread 5 got semaphore
Thread 5 handling request 4, (1 handled so far)
(4) Received Access-Request Id 4 from 10.8.1.6:59971 to 10.100.11.22:1812 length 235
(4)   User-Name = "cza"
(4)   NAS-IP-Address = 10.8.1.6
(4)   NAS-Identifier = "d2fbe4c2d34e"
(4)   Called-Station-Id = "D2-FB-E4-C2-D3-4E:anonymized-fr30"
(4)   NAS-Port-Type = Wireless-802.11
(4)   Service-Type = Framed-User
(4)   Calling-Station-Id = "F0-18-98-08-86-BB"
(4)   Connect-Info = "CONNECT 0Mbps 802.11b"
(4)   Acct-Session-Id = "875E51A747B94C9E"
(4)   Acct-Multi-Session-Id = "36FC722677D9A1F9"
(4)   WLAN-Pairwise-Cipher = 1027076
(4)   WLAN-Group-Cipher = 1027076
(4)   WLAN-AKM-Suite = 1027073
(4)   Framed-MTU = 1002
(4)   EAP-Message = 0x028e00061500
(4)   State = 0x0eefef3d0d61faa75750d418f9278958
(4)   Message-Authenticator = 0x26c87fa19a87ba9b53b24daa4b83ec7b
(4) Restoring &session-state
(4)   &session-state:Framed-MTU = 994
(4)   &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello"
(4)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello"
(4)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate"
(4)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange"
(4)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone"
(4) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(4)   authorize {
(4)     policy rewrite_called_station_id {
(4)       if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) {
(4)       if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))  -> TRUE
(4)       if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))  {
(4)         update request {
(4)           EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}}
(4)              --> D2-FB-E4-C2-D3-4E
(4)           &Called-Station-Id := D2-FB-E4-C2-D3-4E
(4)         } # update request = noop
(4)         if ("%{8}") {
(4)         EXPAND %{8}
(4)            --> anonymized-fr30
(4)         if ("%{8}")  -> TRUE
(4)         if ("%{8}")  {
(4)           update request {
(4)             EXPAND %{8}
(4)                --> anonymized-fr30
(4)             &Called-Station-SSID := anonymized-fr30
(4)           } # update request = noop
(4)         } # if ("%{8}")  = noop
(4)         [updated] = updated
(4)       } # if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))  = updated
(4)       ... skipping else: Preceding "if" was taken
(4)     } # policy rewrite_called_station_id = updated
(4)     if (&Called-Station-SSID == 'anonymized Corp Device') {
(4)     if (&Called-Station-SSID == 'anonymized Corp Device')  -> FALSE
(4)     else {
(4)       update request {
(4)         tapp-ldap = "users"
(4)       } # update request = noop
(4)     } # else = noop
(4)     policy filter_username {
(4)       if (&User-Name) {
(4)       if (&User-Name)  -> TRUE
(4)       if (&User-Name)  {
(4)         if (&User-Name =~ / /) {
(4)         if (&User-Name =~ / /)  -> FALSE
(4)         if (&User-Name =~ /@[^@]*@/ ) {
(4)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(4)         if (&User-Name =~ /\.\./ ) {
(4)         if (&User-Name =~ /\.\./ )  -> FALSE
(4)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(4)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(4)         if (&User-Name =~ /\.$/)  {
(4)         if (&User-Name =~ /\.$/)   -> FALSE
(4)         if (&User-Name =~ /@\./)  {
(4)         if (&User-Name =~ /@\./)   -> FALSE
(4)       } # if (&User-Name)  = updated
(4)     } # policy filter_username = updated
(4)     [preprocess] = ok
(4)     [chap] = noop
(4)     [mschap] = noop
(4)     [digest] = noop
(4) suffix: Checking for suffix after "@"
(4) suffix: No '@' in User-Name = "cza", looking up realm NULL
(4) suffix: No such realm "NULL"
(4)     [suffix] = noop
(4) eap: Peer sent EAP Response (code 2) ID 142 length 6
(4) eap: Continuing tunnel setup
(4)     [eap] = ok
(4)   } # authorize = ok
(4) Found Auth-Type = eap
(4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(4)   authenticate {
(4) eap: Expiring EAP session with state 0x0eefef3d0d61faa7
(4) eap: Finished EAP session with state 0x0eefef3d0d61faa7
(4) eap: Previous EAP request found for state 0x0eefef3d0d61faa7, released from the list
(4) eap: Peer sent packet with method EAP TTLS (21)
(4) eap: Calling submodule eap_ttls to process data
(4) eap_ttls: Authenticate
(4) eap_ttls: (TLS) Peer ACKed our handshake fragment
(4) eap: Sending EAP Request (code 1) ID 143 length 779
(4) eap: EAP session adding &reply:State = 0x0eefef3d0a60faa7
(4)     [eap] = handled
(4)   } # authenticate = handled
(4) Using Post-Auth-Type Challenge
(4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(4)   Challenge { ... } # empty sub-section is ignored
(4) session-state: Saving cached attributes
(4)   Framed-MTU = 994
(4)   TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello"
(4)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello"
(4)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate"
(4)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange"
(4)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone"
(4) Sent Access-Challenge Id 4 from 10.100.11.22:1812 to 10.8.1.6:59971 length 843
(4)   EAP-Message = 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
(4)   Message-Authenticator = 0x00000000000000000000000000000000
(4)   State = 0x0eefef3d0a60faa75750d418f9278958
(4) Finished request
Thread 5 waiting to be assigned a request
Thread 2 got semaphore
Thread 2 handling request 5, (2 handled so far)
(5) Received Access-Request Id 5 from 10.8.1.6:59971 to 10.100.11.22:1812 length 365
(5)   User-Name = "cza"
(5)   NAS-IP-Address = 10.8.1.6
(5)   NAS-Identifier = "d2fbe4c2d34e"
(5)   Called-Station-Id = "D2-FB-E4-C2-D3-4E:anonymized-fr30"
(5)   NAS-Port-Type = Wireless-802.11
(5)   Service-Type = Framed-User
(5)   Calling-Station-Id = "F0-18-98-08-86-BB"
(5)   Connect-Info = "CONNECT 0Mbps 802.11b"
(5)   Acct-Session-Id = "875E51A747B94C9E"
(5)   Acct-Multi-Session-Id = "36FC722677D9A1F9"
(5)   WLAN-Pairwise-Cipher = 1027076
(5)   WLAN-Group-Cipher = 1027076
(5)   WLAN-AKM-Suite = 1027073
(5)   Framed-MTU = 1002
(5)   EAP-Message = 0x028f008815800000007e160303004610000042410467e9d6326bc4933354ca4ba1fb7d72d1bc59847463d6d7544c37e40cf9e0eba1cc12eba0e2fdc9eb727afc77899fc0ff2ca8a5ceaf9ed343aeee501be0a7807b1403030001011603030028520f1fdb8e8aab9f38bd06fbab31dd4a5bbcac5f9fc781c69d5115fb12fd8bac0900d38676a60b04
(5)   State = 0x0eefef3d0a60faa75750d418f9278958
(5)   Message-Authenticator = 0x7f130827ca39198fc1c7d3427c028e1e
(5) Restoring &session-state
(5)   &session-state:Framed-MTU = 994
(5)   &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello"
(5)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello"
(5)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate"
(5)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange"
(5)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone"
(5) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(5)   authorize {
(5)     policy rewrite_called_station_id {
(5)       if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) {
(5)       if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))  -> TRUE
(5)       if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))  {
(5)         update request {
(5)           EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}}
(5)              --> D2-FB-E4-C2-D3-4E
(5)           &Called-Station-Id := D2-FB-E4-C2-D3-4E
(5)         } # update request = noop
(5)         if ("%{8}") {
(5)         EXPAND %{8}
(5)            --> anonymized-fr30
(5)         if ("%{8}")  -> TRUE
(5)         if ("%{8}")  {
(5)           update request {
(5)             EXPAND %{8}
(5)                --> anonymized-fr30
(5)             &Called-Station-SSID := anonymized-fr30
(5)           } # update request = noop
(5)         } # if ("%{8}")  = noop
(5)         [updated] = updated
(5)       } # if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))  = updated
(5)       ... skipping else: Preceding "if" was taken
(5)     } # policy rewrite_called_station_id = updated
(5)     if (&Called-Station-SSID == 'anonymized Corp Device') {
(5)     if (&Called-Station-SSID == 'anonymized Corp Device')  -> FALSE
(5)     else {
(5)       update request {
(5)         tapp-ldap = "users"
(5)       } # update request = noop
(5)     } # else = noop
(5)     policy filter_username {
(5)       if (&User-Name) {
(5)       if (&User-Name)  -> TRUE
(5)       if (&User-Name)  {
(5)         if (&User-Name =~ / /) {
(5)         if (&User-Name =~ / /)  -> FALSE
(5)         if (&User-Name =~ /@[^@]*@/ ) {
(5)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(5)         if (&User-Name =~ /\.\./ ) {
(5)         if (&User-Name =~ /\.\./ )  -> FALSE
(5)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(5)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(5)         if (&User-Name =~ /\.$/)  {
(5)         if (&User-Name =~ /\.$/)   -> FALSE
(5)         if (&User-Name =~ /@\./)  {
(5)         if (&User-Name =~ /@\./)   -> FALSE
(5)       } # if (&User-Name)  = updated
(5)     } # policy filter_username = updated
(5)     [preprocess] = ok
(5)     [chap] = noop
(5)     [mschap] = noop
(5)     [digest] = noop
(5) suffix: Checking for suffix after "@"
(5) suffix: No '@' in User-Name = "cza", looking up realm NULL
(5) suffix: No such realm "NULL"
(5)     [suffix] = noop
(5) eap: Peer sent EAP Response (code 2) ID 143 length 136
(5) eap: Continuing tunnel setup
(5)     [eap] = ok
(5)   } # authorize = ok
(5) Found Auth-Type = eap
(5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(5)   authenticate {
(5) eap: Expiring EAP session with state 0x0eefef3d0a60faa7
(5) eap: Finished EAP session with state 0x0eefef3d0a60faa7
(5) eap: Previous EAP request found for state 0x0eefef3d0a60faa7, released from the list
(5) eap: Peer sent packet with method EAP TTLS (21)
(5) eap: Calling submodule eap_ttls to process data
(5) eap_ttls: Authenticate
(5) eap_ttls: (TLS) EAP Peer says that the final record size will be 126 bytes
(5) eap_ttls: (TLS) EAP Got all data (126 bytes)
(5) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS write server done
(5) eap_ttls: (TLS) recv TLS 1.2 Handshake, ClientKeyExchange
(5) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS read client key exchange
(5) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS read change cipher spec
(5) eap_ttls: (TLS) recv TLS 1.2 Handshake, Finished
(5) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS read finished
(5) eap_ttls: (TLS) send TLS 1.2 ChangeCipherSpec
(5) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS write change cipher spec
(5) eap_ttls: (TLS) send TLS 1.2 Handshake, Finished
(5) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS write finished
(5) eap_ttls: (TLS) Handshake state - SSL negotiation finished successfully
(5) eap_ttls: (TLS) Connection Established
(5) eap_ttls:   TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"
(5) eap_ttls:   TLS-Session-Version = "TLS 1.2"
(5) eap: Sending EAP Request (code 1) ID 144 length 61
(5) eap: EAP session adding &reply:State = 0x0eefef3d0b7ffaa7
(5)     [eap] = handled
(5)   } # authenticate = handled
(5) Using Post-Auth-Type Challenge
(5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(5)   Challenge { ... } # empty sub-section is ignored
(5) session-state: Saving cached attributes
(5)   Framed-MTU = 994
(5)   TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello"
(5)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello"
(5)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate"
(5)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange"
(5)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone"
(5)   TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, ClientKeyExchange"
(5)   TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished"
(5)   TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec"
(5)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished"
(5)   TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"
(5)   TLS-Session-Version = "TLS 1.2"
(5) Sent Access-Challenge Id 5 from 10.100.11.22:1812 to 10.8.1.6:59971 length 119
(5)   EAP-Message = 0x0190003d1580000000331403030001011603030028830a955bdc88bb47ef9a382e8adb6c0364cd80ba3b5c342101456e68cf291aef789116097ebae3c8
(5)   Message-Authenticator = 0x00000000000000000000000000000000
(5)   State = 0x0eefef3d0b7ffaa75750d418f9278958
(5) Finished request
Thread 2 waiting to be assigned a request
Thread 1 got semaphore
Thread 1 handling request 6, (2 handled so far)
(6) Received Access-Request Id 6 from 10.8.1.6:59971 to 10.100.11.22:1812 length 284
(6)   User-Name = "cza"
(6)   NAS-IP-Address = 10.8.1.6
(6)   NAS-Identifier = "d2fbe4c2d34e"
(6)   Called-Station-Id = "D2-FB-E4-C2-D3-4E:anonymized-fr30"
(6)   NAS-Port-Type = Wireless-802.11
(6)   Service-Type = Framed-User
(6)   Calling-Station-Id = "F0-18-98-08-86-BB"
(6)   Connect-Info = "CONNECT 0Mbps 802.11b"
(6)   Acct-Session-Id = "875E51A747B94C9E"
(6)   Acct-Multi-Session-Id = "36FC722677D9A1F9"
(6)   WLAN-Pairwise-Cipher = 1027076
(6)   WLAN-Group-Cipher = 1027076
(6)   WLAN-AKM-Suite = 1027073
(6)   Framed-MTU = 1002
(6)   EAP-Message = 0x0290003715800000002d1703030028520f1fdb8e8aaba0c98d36370a51ef215137be1e4a5a347fc843b5d436afce681c437ca8ceeedbe3
(6)   State = 0x0eefef3d0b7ffaa75750d418f9278958
(6)   Message-Authenticator = 0x9479a9a86a8ee8fef04038b69a691e85
(6) Restoring &session-state
(6)   &session-state:Framed-MTU = 994
(6)   &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello"
(6)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello"
(6)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate"
(6)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange"
(6)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone"
(6)   &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, ClientKeyExchange"
(6)   &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished"
(6)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec"
(6)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished"
(6)   &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"
(6)   &session-state:TLS-Session-Version = "TLS 1.2"
(6) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(6)   authorize {
(6)     policy rewrite_called_station_id {
(6)       if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) {
(6)       if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))  -> TRUE
(6)       if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))  {
(6)         update request {
(6)           EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}}
(6)              --> D2-FB-E4-C2-D3-4E
(6)           &Called-Station-Id := D2-FB-E4-C2-D3-4E
(6)         } # update request = noop
(6)         if ("%{8}") {
(6)         EXPAND %{8}
(6)            --> anonymized-fr30
(6)         if ("%{8}")  -> TRUE
(6)         if ("%{8}")  {
(6)           update request {
(6)             EXPAND %{8}
(6)                --> anonymized-fr30
(6)             &Called-Station-SSID := anonymized-fr30
(6)           } # update request = noop
(6)         } # if ("%{8}")  = noop
(6)         [updated] = updated
(6)       } # if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))  = updated
(6)       ... skipping else: Preceding "if" was taken
(6)     } # policy rewrite_called_station_id = updated
(6)     if (&Called-Station-SSID == 'anonymized Corp Device') {
(6)     if (&Called-Station-SSID == 'anonymized Corp Device')  -> FALSE
(6)     else {
(6)       update request {
(6)         tapp-ldap = "users"
(6)       } # update request = noop
(6)     } # else = noop
(6)     policy filter_username {
(6)       if (&User-Name) {
(6)       if (&User-Name)  -> TRUE
(6)       if (&User-Name)  {
(6)         if (&User-Name =~ / /) {
(6)         if (&User-Name =~ / /)  -> FALSE
(6)         if (&User-Name =~ /@[^@]*@/ ) {
(6)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(6)         if (&User-Name =~ /\.\./ ) {
(6)         if (&User-Name =~ /\.\./ )  -> FALSE
(6)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(6)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(6)         if (&User-Name =~ /\.$/)  {
(6)         if (&User-Name =~ /\.$/)   -> FALSE
(6)         if (&User-Name =~ /@\./)  {
(6)         if (&User-Name =~ /@\./)   -> FALSE
(6)       } # if (&User-Name)  = updated
(6)     } # policy filter_username = updated
(6)     [preprocess] = ok
(6)     [chap] = noop
(6)     [mschap] = noop
(6)     [digest] = noop
(6) suffix: Checking for suffix after "@"
(6) suffix: No '@' in User-Name = "cza", looking up realm NULL
(6) suffix: No such realm "NULL"
(6)     [suffix] = noop
(6) eap: Peer sent EAP Response (code 2) ID 144 length 55
(6) eap: Continuing tunnel setup
(6)     [eap] = ok
(6)   } # authorize = ok
(6) Found Auth-Type = eap
(6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(6)   authenticate {
(6) eap: Expiring EAP session with state 0x0eefef3d0b7ffaa7
(6) eap: Finished EAP session with state 0x0eefef3d0b7ffaa7
(6) eap: Previous EAP request found for state 0x0eefef3d0b7ffaa7, released from the list
(6) eap: Peer sent packet with method EAP TTLS (21)
(6) eap: Calling submodule eap_ttls to process data
(6) eap_ttls: Authenticate
(6) eap_ttls: (TLS) EAP Peer says that the final record size will be 45 bytes
(6) eap_ttls: (TLS) EAP Got all data (45 bytes)
(6) eap_ttls: Session established.  Proceeding to decode tunneled attributes
(6) eap_ttls: Got tunneled request
(6) eap_ttls:   EAP-Message = 0x0200000801637a61
(6) eap_ttls:   FreeRADIUS-Proxied-To = 127.0.0.1
(6) eap_ttls: Got tunneled identity of cza
(6) eap_ttls: Setting default EAP type for tunneled EAP session
(6) eap_ttls: Sending tunneled request
(6) Virtual server inner-tunnel received request
(6)   EAP-Message = 0x0200000801637a61
(6)   FreeRADIUS-Proxied-To = 127.0.0.1
(6)   User-Name = "cza"
(6) WARNING: Outer and inner identities are the same.  User privacy is compromised.
(6) server inner-tunnel {
(6)   # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel
(6)     authorize {
(6)       policy rewrite_called_station_id {
(6)         if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) {
(6)         if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))  -> FALSE
(6)         else {
(6)           [noop] = noop
(6)         } # else = noop
(6)       } # policy rewrite_called_station_id = noop
(6)       if (&Called-Station-SSID == 'anonymized Corp Device') {
(6)       ERROR: Failed retrieving values required to evaluate condition
(6)       else {
(6)         update request {
(6)           tapp-ldap = "users"
(6)         } # update request = noop
(6)       } # else = noop
(6)       policy filter_username {
(6)         if (&User-Name) {
(6)         if (&User-Name)  -> TRUE
(6)         if (&User-Name)  {
(6)           if (&User-Name =~ / /) {
(6)           if (&User-Name =~ / /)  -> FALSE
(6)           if (&User-Name =~ /@[^@]*@/ ) {
(6)           if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(6)           if (&User-Name =~ /\.\./ ) {
(6)           if (&User-Name =~ /\.\./ )  -> FALSE
(6)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(6)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(6)           if (&User-Name =~ /\.$/)  {
(6)           if (&User-Name =~ /\.$/)   -> FALSE
(6)           if (&User-Name =~ /@\./)  {
(6)           if (&User-Name =~ /@\./)   -> FALSE
(6)         } # if (&User-Name)  = noop
(6)       } # policy filter_username = noop
(6)       [chap] = noop
(6)       [mschap] = noop
(6) suffix: Checking for suffix after "@"
(6) suffix: No '@' in User-Name = "cza", looking up realm NULL
(6) suffix: No such realm "NULL"
(6)       [suffix] = noop
(6)       update control {
(6)         &Proxy-To-Realm := LOCAL
(6)       } # update control = noop
(6) eap: Peer sent EAP Response (code 2) ID 0 length 8
(6) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize
(6)       [eap] = ok
(6)     } # authorize = ok
(6)   Found Auth-Type = eap
(6)   # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel
(6)     authenticate {
(6) eap: Peer sent packet with method EAP Identity (1)
(6) eap: Calling submodule eap_md5 to process data
(6) eap_md5: Issuing MD5 Challenge
(6) eap: Sending EAP Request (code 1) ID 1 length 22
(6) eap: EAP session adding &reply:State = 0xa193aee6a192aa3f
(6)       [eap] = handled
(6)     } # authenticate = handled
(6) } # server inner-tunnel
(6) Virtual server sending reply
(6)   EAP-Message = 0x01010016041033efdb3620686abbebd4b27354929742
(6)   Message-Authenticator = 0x00000000000000000000000000000000
(6)   State = 0xa193aee6a192aa3fe1711ba4b8803f55
(6) eap_ttls: Got tunneled Access-Challenge
(6) eap: Sending EAP Request (code 1) ID 145 length 71
(6) eap: EAP session adding &reply:State = 0x0eefef3d087efaa7
(6)     [eap] = handled
(6)   } # authenticate = handled
(6) Using Post-Auth-Type Challenge
(6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(6)   Challenge { ... } # empty sub-section is ignored
(6) session-state: Saving cached attributes
(6)   Framed-MTU = 994
(6)   TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello"
(6)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello"
(6)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate"
(6)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange"
(6)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone"
(6)   TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, ClientKeyExchange"
(6)   TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished"
(6)   TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec"
(6)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished"
(6)   TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"
(6)   TLS-Session-Version = "TLS 1.2"
(6) Sent Access-Challenge Id 6 from 10.100.11.22:1812 to 10.8.1.6:59971 length 129
(6)   EAP-Message = 0x0191004715800000003d1703030038830a955bdc88bb48803e61729f343bd74142aeb2a242085b5cf4d0fce3392daf5e1cba6d1b5cb3483a5fc2118492087cb1955effe3230d1e
(6)   Message-Authenticator = 0x00000000000000000000000000000000
(6)   State = 0x0eefef3d087efaa75750d418f9278958
(6) Finished request
Thread 1 waiting to be assigned a request
Thread 4 got semaphore
Thread 4 handling request 7, (2 handled so far)
(7) Received Access-Request Id 7 from 10.8.1.6:59971 to 10.100.11.22:1812 length 304
(7)   User-Name = "cza"
(7)   NAS-IP-Address = 10.8.1.6
(7)   NAS-Identifier = "d2fbe4c2d34e"
(7)   Called-Station-Id = "D2-FB-E4-C2-D3-4E:anonymized-fr30"
(7)   NAS-Port-Type = Wireless-802.11
(7)   Service-Type = Framed-User
(7)   Calling-Station-Id = "F0-18-98-08-86-BB"
(7)   Connect-Info = "CONNECT 0Mbps 802.11b"
(7)   Acct-Session-Id = "875E51A747B94C9E"
(7)   Acct-Multi-Session-Id = "36FC722677D9A1F9"
(7)   WLAN-Pairwise-Cipher = 1027076
(7)   WLAN-Group-Cipher = 1027076
(7)   WLAN-AKM-Suite = 1027073
(7)   Framed-MTU = 1002
(7)   EAP-Message = 0x0291004b158000000041170303003c520f1fdb8e8aaba135f861c774ac42c850d105539d14fa2a427bf0b5a81a2946ad4ad5e1ae54bd0ead268def655b0495fe6f57e4aa29a13f8f34772e
(7)   State = 0x0eefef3d087efaa75750d418f9278958
(7)   Message-Authenticator = 0xa977735c890d23cb5c854dbad01843c8
(7) Restoring &session-state
(7)   &session-state:Framed-MTU = 994
(7)   &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello"
(7)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello"
(7)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate"
(7)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange"
(7)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone"
(7)   &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, ClientKeyExchange"
(7)   &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished"
(7)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec"
(7)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished"
(7)   &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"
(7)   &session-state:TLS-Session-Version = "TLS 1.2"
(7) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(7)   authorize {
(7)     policy rewrite_called_station_id {
(7)       if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) {
(7)       if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))  -> TRUE
(7)       if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))  {
(7)         update request {
(7)           EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}}
(7)              --> D2-FB-E4-C2-D3-4E
(7)           &Called-Station-Id := D2-FB-E4-C2-D3-4E
(7)         } # update request = noop
(7)         if ("%{8}") {
(7)         EXPAND %{8}
(7)            --> anonymized-fr30
(7)         if ("%{8}")  -> TRUE
(7)         if ("%{8}")  {
(7)           update request {
(7)             EXPAND %{8}
(7)                --> anonymized-fr30
(7)             &Called-Station-SSID := anonymized-fr30
(7)           } # update request = noop
(7)         } # if ("%{8}")  = noop
(7)         [updated] = updated
(7)       } # if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))  = updated
(7)       ... skipping else: Preceding "if" was taken
(7)     } # policy rewrite_called_station_id = updated
(7)     if (&Called-Station-SSID == 'anonymized Corp Device') {
(7)     if (&Called-Station-SSID == 'anonymized Corp Device')  -> FALSE
(7)     else {
(7)       update request {
(7)         tapp-ldap = "users"
(7)       } # update request = noop
(7)     } # else = noop
(7)     policy filter_username {
(7)       if (&User-Name) {
(7)       if (&User-Name)  -> TRUE
(7)       if (&User-Name)  {
(7)         if (&User-Name =~ / /) {
(7)         if (&User-Name =~ / /)  -> FALSE
(7)         if (&User-Name =~ /@[^@]*@/ ) {
(7)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(7)         if (&User-Name =~ /\.\./ ) {
(7)         if (&User-Name =~ /\.\./ )  -> FALSE
(7)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(7)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(7)         if (&User-Name =~ /\.$/)  {
(7)         if (&User-Name =~ /\.$/)   -> FALSE
(7)         if (&User-Name =~ /@\./)  {
(7)         if (&User-Name =~ /@\./)   -> FALSE
(7)       } # if (&User-Name)  = updated
(7)     } # policy filter_username = updated
(7)     [preprocess] = ok
(7)     [chap] = noop
(7)     [mschap] = noop
(7)     [digest] = noop
(7) suffix: Checking for suffix after "@"
(7) suffix: No '@' in User-Name = "cza", looking up realm NULL
(7) suffix: No such realm "NULL"
(7)     [suffix] = noop
(7) eap: Peer sent EAP Response (code 2) ID 145 length 75
(7) eap: Continuing tunnel setup
(7)     [eap] = ok
(7)   } # authorize = ok
(7) Found Auth-Type = eap
(7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(7)   authenticate {
(7) eap: Expiring EAP session with state 0xa193aee6a192aa3f
(7) eap: Finished EAP session with state 0x0eefef3d087efaa7
(7) eap: Previous EAP request found for state 0x0eefef3d087efaa7, released from the list
(7) eap: Peer sent packet with method EAP TTLS (21)
(7) eap: Calling submodule eap_ttls to process data
(7) eap_ttls: Authenticate
(7) eap_ttls: (TLS) EAP Peer says that the final record size will be 65 bytes
(7) eap_ttls: (TLS) EAP Got all data (65 bytes)
(7) eap_ttls: Session established.  Proceeding to decode tunneled attributes
(7) eap_ttls: Got tunneled request
(7) eap_ttls:   EAP-Message = 0x020100190410c5b623d691d9aa887263aa412269fbb3637a61
(7) eap_ttls:   FreeRADIUS-Proxied-To = 127.0.0.1
(7) eap_ttls: Sending tunneled request
(7) Virtual server inner-tunnel received request
(7)   EAP-Message = 0x020100190410c5b623d691d9aa887263aa412269fbb3637a61
(7)   FreeRADIUS-Proxied-To = 127.0.0.1
(7)   User-Name = "cza"
(7)   State = 0xa193aee6a192aa3fe1711ba4b8803f55
(7) WARNING: Outer and inner identities are the same.  User privacy is compromised.
(7) server inner-tunnel {
(7)   session-state: No cached attributes
(7)   # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel
(7)     authorize {
(7)       policy rewrite_called_station_id {
(7)         if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) {
(7)         if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i))  -> FALSE
(7)         else {
(7)           [noop] = noop
(7)         } # else = noop
(7)       } # policy rewrite_called_station_id = noop
(7)       if (&Called-Station-SSID == 'anonymized Corp Device') {
(7)       ERROR: Failed retrieving values required to evaluate condition
(7)       else {
(7)         update request {
(7)           tapp-ldap = "users"
(7)         } # update request = noop
(7)       } # else = noop
(7)       policy filter_username {
(7)         if (&User-Name) {
(7)         if (&User-Name)  -> TRUE
(7)         if (&User-Name)  {
(7)           if (&User-Name =~ / /) {
(7)           if (&User-Name =~ / /)  -> FALSE
(7)           if (&User-Name =~ /@[^@]*@/ ) {
(7)           if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(7)           if (&User-Name =~ /\.\./ ) {
(7)           if (&User-Name =~ /\.\./ )  -> FALSE
(7)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(7)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(7)           if (&User-Name =~ /\.$/)  {
(7)           if (&User-Name =~ /\.$/)   -> FALSE
(7)           if (&User-Name =~ /@\./)  {
(7)           if (&User-Name =~ /@\./)   -> FALSE
(7)         } # if (&User-Name)  = noop
(7)       } # policy filter_username = noop
(7)       [chap] = noop
(7)       [mschap] = noop
(7) suffix: Checking for suffix after "@"
(7) suffix: No '@' in User-Name = "cza", looking up realm NULL
(7) suffix: No such realm "NULL"
(7)       [suffix] = noop
(7)       update control {
(7)         &Proxy-To-Realm := LOCAL
(7)       } # update control = noop
(7) eap: Peer sent EAP Response (code 2) ID 1 length 25
(7) eap: No EAP Start, assuming it's an on-going EAP conversation
(7)       [eap] = updated
(7)       [files] = noop
rlm_ldap (ldap): Reserved connection (0)
(7) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}})
(7) ldap:    --> (uid=cza)
(7) ldap: EXPAND ou=%{tapp-ldap},dc=anonymized,dc=com
(7) ldap:    --> ou=users,dc=anonymized,dc=com
(7) ldap: Performing search in "ou=users,dc=anonymized,dc=com" with filter "(uid=cza)", scope "sub"
(7) ldap: Waiting for search result...
(7) ldap: User object found at DN "uid=cza,ou=users,dc=anonymized,dc=com"
(7) ldap: Processing user attributes
(7) ldap: control:Password-With-Header += '{SSHA}z4O/Nrv4ACG21a7CpXgzdCunual1UGV1ZkdvZkkyNEI='
rlm_ldap (ldap): Released connection (0)
Need more connections to reach 10 spares
rlm_ldap (ldap): Opening additional connection (5), 1 of 27 pending slots used
rlm_ldap (ldap): Connecting to ldaps://10.100.11.20:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
(7)       [ldap] = updated
(7)       [expiration] = noop
(7)       [logintime] = noop
(7) pap: Converted: &control:Password-With-Header -> &control:SSHA1-Password
(7) pap: Removing &control:Password-With-Header
(7) pap: Normalizing SSHA1-Password from base64 encoding, 44 bytes -> 32 bytes
(7) pap: WARNING: Auth-Type already set.  Not setting to PAP
(7)       [pap] = noop
(7)     } # authorize = updated
(7)   Found Auth-Type = eap
(7)   # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel
(7)     authenticate {
(7) eap: Expiring EAP session with state 0xa193aee6a192aa3f
(7) eap: Finished EAP session with state 0xa193aee6a192aa3f
(7) eap: Previous EAP request found for state 0xa193aee6a192aa3f, released from the list
(7) eap: Peer sent packet with method EAP MD5 (4)
(7) eap: Calling submodule eap_md5 to process data
(7) eap_md5: ERROR: Cleartext-Password is required for EAP-MD5 authentication
(7) eap: ERROR: Failed continuing EAP MD5 (4) session.  EAP sub-module failed
(7) eap: Sending EAP Failure (code 4) ID 1 length 4
(7) eap: Failed in EAP select
(7)       [eap] = invalid
(7)     } # authenticate = invalid
(7)   Failed to authenticate the user
(7)   Using Post-Auth-Type Reject
(7)   # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel
(7)     Post-Auth-Type REJECT {
(7) attr_filter.access_reject: EXPAND %{User-Name}
(7) attr_filter.access_reject:    --> cza
(7) attr_filter.access_reject: Matched entry DEFAULT at line 11
(7)       [attr_filter.access_reject] = updated
(7)       update outer.session-state {
(7)         &Module-Failure-Message := &request:Module-Failure-Message -> 'Failed retrieving values required to evaluate condition'
(7)       } # update outer.session-state = noop
(7)     } # Post-Auth-Type REJECT = updated
(7) } # server inner-tunnel
(7) Virtual server sending reply
(7)   EAP-Message = 0x04010004
(7)   Message-Authenticator = 0x00000000000000000000000000000000
(7) eap_ttls: Got tunneled Access-Reject
(7) eap: ERROR: Failed continuing EAP TTLS (21) session.  EAP sub-module failed
(7) eap: Sending EAP Failure (code 4) ID 145 length 4
(7) eap: Failed in EAP select
(7)     [eap] = invalid
(7)   } # authenticate = invalid
(7) Failed to authenticate the user
(7) Using Post-Auth-Type Reject
(7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(7)   Post-Auth-Type REJECT {
(7) attr_filter.access_reject: EXPAND %{User-Name}
(7) attr_filter.access_reject:    --> cza
(7) attr_filter.access_reject: Matched entry DEFAULT at line 11
(7)     [attr_filter.access_reject] = updated
(7)     [eap] = noop
(7)     policy remove_reply_message_if_eap {
(7)       if (&reply:EAP-Message && &reply:Reply-Message) {
(7)       if (&reply:EAP-Message && &reply:Reply-Message)  -> FALSE
(7)       else {
(7)         [noop] = noop
(7)       } # else = noop
(7)     } # policy remove_reply_message_if_eap = noop
(7)   } # Post-Auth-Type REJECT = updated
(7) Delaying response for 1.000000 seconds
Thread 4 waiting to be assigned a request
Waking up in 0.6 seconds.
(7) Sending delayed response
(7) Sent Access-Reject Id 7 from 10.100.11.22:1812 to 10.8.1.6:59971 length 44
(7)   EAP-Message = 0x04910004
(7)   Message-Authenticator = 0x00000000000000000000000000000000
Waking up in 3.6 seconds.
(0) Cleaning up request packet ID 0 with timestamp +26 due to cleanup_delay was reached
(1) Cleaning up request packet ID 1 with timestamp +26 due to cleanup_delay was reached
(2) Cleaning up request packet ID 2 with timestamp +26 due to cleanup_delay was reached
(3) Cleaning up request packet ID 3 with timestamp +26 due to cleanup_delay was reached
(4) Cleaning up request packet ID 4 with timestamp +26 due to cleanup_delay was reached
(5) Cleaning up request packet ID 5 with timestamp +26 due to cleanup_delay was reached
(6) Cleaning up request packet ID 6 with timestamp +26 due to cleanup_delay was reached
(7) Cleaning up request packet ID 7 with timestamp +26 due to cleanup_delay was reached
Ready to process requests

Thank you in advance,
Best Regards,
Cezary

Mac client fails to authenticate after upgrade from 3.0.16 to 3.0.26

cezary.zaborowski＠tapptic.com