hi. i use jradius as authorize module. when jradius sent Access-Reject to freeradius, i got the following logs: rad_recv: Access-Request packet from host 127.0.0.1:32876, id=1, length=62 --- Walking the entire request list --- Waking up in 31 seconds... ////////////////////////// why in 31 seconds, that will take a long time to send Access-Reject Thread 8 got semaphore Thread 8 handling request 67, (7 handled so far) User-Name = "test" User-Password = "test" Message-Authenticator = 0x5cc77d6981e1386f5260a10691c9ce74 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 67 modcall[authorize]: module "preprocess" returns ok for request 67 rlm_jradius: packing attribute User-Name (type: 1; len: 4) rlm_jradius: packing attribute User-Password (type: 2; len: 4) rlm_jradius: packing attribute Message-Authenticator (type: 80; len: 16) rlm_jradius: packing attribute NAS-IP-Address (type: 4; len: 4) rlm_jradius: packing attribute Client-IP-Address (type: 1052; len: 4) rlm_jradius: packing packet with code: 1 (attr length: 92) rlm_jradius: packing packet with code: 0 (attr length: 0) rlm_jradius: sending 117 bytes to jradius server rlm_jradius: return code 8; receiving 2 packets rlm_jradius: reading packet: code=1 len=92 rlm_jradius: reading attribute: type=1; len=4 rlm_jradius: reading attribute: type=2; len=4 rlm_jradius: reading attribute: type=80; len=16 rlm_jradius: reading attribute: type=4; len=4 rlm_jradius: reading attribute: type=1052; len=4 rlm_jradius: reading packet: code=0 len=0 rlm_jradius: reading request: config_item: len=0 modcall[authorize]: module "jradius" returns updated for request 67 modcall: group authorize returns updated for request 67 auth: No authenticate method (Auth-Type) configuration found for the request: Rejecting the user auth: Failed to validate the user. Processing the post-auth section of radiusd.conf modcall: entering group Post-Auth-Type for request 67 rlm_jradius: packing attribute User-Name (type: 1; len: 4) rlm_jradius: packing attribute User-Password (type: 2; len: 4) rlm_jradius: packing attribute Message-Authenticator (type: 80; len: 16) rlm_jradius: packing attribute NAS-IP-Address (type: 4; len: 4) rlm_jradius: packing attribute Client-IP-Address (type: 1052; len: 4) rlm_jradius: packing packet with code: 1 (attr length: 92) rlm_jradius: packing packet with code: 3 (attr length: 0) rlm_jradius: packing attribute Post-Auth-Type (type: 1014; len: 4) rlm_jradius: sending 133 bytes to jradius server rlm_jradius: return code 8; receiving 2 packets rlm_jradius: reading packet: code=1 len=92 rlm_jradius: reading attribute: type=1; len=4 rlm_jradius: reading attribute: type=2; len=4 rlm_jradius: reading attribute: type=80; len=16 rlm_jradius: reading attribute: type=4; len=4 rlm_jradius: reading attribute: type=1052; len=4 rlm_jradius: reading packet: code=3 len=0 rlm_jradius: reading request: config_item: len=16 rlm_jradius: reading attribute: type=1014; len=4 modcall[post-auth]: module "jradius" returns updated for request 67 modcall: group Post-Auth-Type returns updated for request 67 Delaying request 67 for 1 seconds Finished request 67 Going to the next request Thread 8 waiting to be assigned a request --- Walking the entire request list --- Sending Access-Reject of id 1 to 127.0.0.1:32876 Cleaning up request 67 ID 1 with timestamp 435b0861 Nothing to do. Sleeping until we see a request. is there something to configure to reduce the waking up time span?? thank you.