Weired because it has been corrected for weeks in the git repository. maybe you should just update your git tree. Le 06.11.2008 01:32, rgreiner a écrit :
Thanks for the tip, but in the mean time I found out why the default 2.1.1 package did not compile.
In the debian/patches/01-radiusd-to-freeradius.dpatch file, on line 38, the following line:
-pidfile = ${run_dir}/radiusd.pid
Must be changed to
-pidfile = ${run_dir}/${name}.pid
Doing that, the standard 2.1.1 package compiles fine.
Thank you for your help,
Roberto
Alexandre Chapellon wrote:
try compiling using bundled libtools remove "--with-system-libtool" from debian/rules then relaunch dpkg-builpackages
Le 05.11.2008 09:53, rgreiner a écrit :
Hi,
I'm trying to compile 2.1.1 on debian using the git version (the standard package stops at the beginning due to the problem with the patches for debian), and in the middle of the checking part it stopped with a message about "INSTALL_LTDL"not being definded (full output below). Could someone please give me a help? A quick googling didn't come up with anyting useable....
Thanks,
Roberto
dpkg-buildpackage: source package is freeradius dpkg-buildpackage: source version is 2.1.1-0 dpkg-buildpackage: source changed by Alan DeKok <aland@freeradius.org> dpkg-buildpackage: host architecture i386 dpkg-buildpackage: source version without epoch 2.1.1-0 debian/rules clean dpatch deapply-all 02-dialupadmin-help not applied to ./ . 01-radiusd-to-freeradius not applied to ./ . rm -rf patch-stamp patch-stampT debian/patched dh_testdir dh_clean rm -f build-arch-stamp build-indep-stamp libltdl/stamp-h1 rm -f install-arch-stamp install-indep-stamp configure-stamp [ -f Make.inc ] && make distclean || true # The make clean forgets to remove this build directory [ -d src/modules/lib ] && rm -fr src/modules/lib || true # Put the original autotools files back in place [ -f config.sub.dist ] && rm config.sub && mv config.sub.dist config.sub || true [ -f config.guess.dist ] && rm config.guess && mv config.guess.dist config.guess || true debian/rules build test -d debian/patched || install -d debian/patched dpatch apply-all applying patch 01-radiusd-to-freeradius to ./ ... ok. applying patch 02-dialupadmin-help to ./ ... ok. dpatch cat-all >>patch-stampT mv -f patch-stampT patch-stamp dh_testdir # Update the autotools files if necessary # Force Build-Depends on autotools-dev for /usr/share/misc/config.* if [ -e config.sub.dist ]; then rm config.sub; else mv config.sub config.sub.dist; fi if [ -e config.guess.dist ]; then rm config.guess; else mv config.guess config.guess.dist; fi ln -s /usr/share/misc/config.sub config.sub ln -s /usr/share/misc/config.guess config.guess ./configure \ --build i486-linux-gnu \ --config-cache \ --prefix=/usr \ --exec-prefix=/usr \ --mandir=/usr/share/man \ --sysconfdir=/etc \ --libdir=/usr/lib/freeradius \ --datadir=/usr/share \ --localstatedir=/var \ --with-raddbdir=/etc/freeradius \ --with-logdir=/var/log/freeradius \ --with-system-libtool --disable-ltdl-install \ --with-large-files --with-udpfromto --with-edir \ --enable-developer \ --with-rlm-sql-postgresql-lib-dir=`pg_config --libdir` \ --with-rlm-sql-postgresql-include-dir=`pg_config --includedir` configure: creating cache config.cache checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking for g++... no checking for c++... no checking for gpp... no checking for aCC... no checking for CC... no checking for cxx... no checking for cc++... no checking for cl.exe... no checking for FCC... no checking for KCC... no checking for RCC... no checking for xlC_r... no checking for xlC... no checking whether we are using the GNU C++ compiler... no checking whether g++ accepts -g... no checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for AIX... no checking whether gcc needs -traditional... no checking whether we are using SUNPro C... no checking for special C compiler options needed for large files... no checking for _FILE_OFFSET_BITS value needed for large files... 64 checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking whether byte ordering is bigendian... no checking for gmake... no checking for make... /usr/bin/make checking for lt_dlinit in -lltdl... yes configure: WARNING: not overwriting libltdl at /usr, force with `--enable-ltdl-install' checking build system type... i486-pc-linux-gnu checking host system type... i486-pc-linux-gnu checking for a sed that does not truncate output... /bin/sed checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 98304 checking whether the shell understands some XSI constructs... yes checking whether the shell understands "+="... yes checking for /usr/bin/ld option to reload object files... -r checking how to recognize dependent libraries... pass_all checking for ar... ar checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for dlfcn.h... yes checking whether we are using the GNU C++ compiler... (cached) no checking whether g++ accepts -g... (cached) no checking which extension is used for runtime loadable modules... checking which variable specifies run-time module search path... checking for the default library search path... checking for library containing dlopen... -ldl checking for dlerror... yes checking for shl_load... no checking for shl_load in -ldld... no checking for dld_link in -ldld... no checking for _ prefix in compiled symbols... no checking whether deplibs are loaded by dlopen... yes checking for argz.h... yes checking for error_t... yes checking for argz_add... yes checking for argz_append... yes checking for argz_count... yes checking for argz_create_sep... yes checking for argz_insert... yes checking for argz_next... yes checking for argz_stringify... yes checking if argz actually works... yes checking whether libtool supports -dlopen/-dlpreopen... yes checking for libtool... /usr/bin/libtool checking docdir... ${datadir}/doc/freeradius checking logdir... /var/log/freeradius checking radacctdir... ${logdir}/radacct checking raddbdir... /etc/freeradius checking for perl... /usr/bin/perl checking for snmpget... /usr/bin/snmpget checking for snmpwalk... /usr/bin/snmpwalk checking for rusers... /usr/bin/rusers checking for locate... /usr/bin/locate checking for dirname... /usr/bin/dirname checking for grep... (cached) /bin/grep checking pthread.h usability... yes checking pthread.h presence... yes checking for pthread.h... yes checking for pthread_create in -lpthread... yes checking for library containing sem_init... none required checking for getsockname in -lsocket... no checking for inet_aton in -lresolv... yes checking for inet_ntoa in -lnsl... yes checking for DH_new in -lcrypto... yes checking for SSL_new in -lssl... yes checking for htonl in -lws2_32... no checking for pcap_open_live in -lpcap... yes checking for a readline compatible library... no checking for dirent.h that defines DIR... yes checking for library containing opendir... none required checking for ANSI C header files... (cached) yes checking whether time.h and sys/time.h may both be included... yes checking for sys/wait.h that is POSIX.1 compatible... yes checking for unistd.h... (cached) yes checking crypt.h usability... yes checking crypt.h presence... yes checking for crypt.h... yes checking errno.h usability... yes checking errno.h presence... yes checking for errno.h... yes checking resource.h usability... no checking resource.h presence... no checking for resource.h... no checking sys/resource.h usability... yes checking sys/resource.h presence... yes checking for sys/resource.h... yes checking getopt.h usability... yes checking getopt.h presence... yes checking for getopt.h... yes checking malloc.h usability... yes checking malloc.h presence... yes checking for malloc.h... yes checking utmp.h usability... yes checking utmp.h presence... yes checking for utmp.h... yes checking utmpx.h usability... yes checking utmpx.h presence... yes checking for utmpx.h... yes checking signal.h usability... yes checking signal.h presence... yes checking for signal.h... yes checking sys/select.h usability... yes checking sys/select.h presence... yes checking for sys/select.h... yes checking syslog.h usability... yes checking syslog.h presence... yes checking for syslog.h... yes checking for inttypes.h... (cached) yes checking for stdint.h... (cached) yes checking stdio.h usability... yes checking stdio.h presence... yes checking for stdio.h... yes checking netdb.h usability... yes checking netdb.h presence... yes checking for netdb.h... yes checking semaphore.h usability... yes checking semaphore.h presence... yes checking for semaphore.h... yes checking arpa/inet.h usability... yes checking arpa/inet.h presence... yes checking for arpa/inet.h... yes checking netinet/in.h usability... yes checking netinet/in.h presence... yes checking for netinet/in.h... yes checking for sys/types.h... (cached) yes checking sys/socket.h usability... yes checking sys/socket.h presence... yes checking for sys/socket.h... yes checking winsock.h usability... no checking winsock.h presence... no checking for winsock.h... no checking sys/time.h usability... yes checking sys/time.h presence... yes checking for sys/time.h... yes checking for sys/wait.h... (cached) yes checking sys/security.h usability... no checking sys/security.h presence... no checking for sys/security.h... no checking fcntl.h usability... yes checking fcntl.h presence... yes checking for fcntl.h... yes checking sys/fcntl.h usability... yes checking sys/fcntl.h presence... yes checking for sys/fcntl.h... yes checking sys/prctl.h usability... yes checking sys/prctl.h presence... yes checking for sys/prctl.h... yes checking sys/un.h usability... yes checking sys/un.h presence... yes checking for sys/un.h... yes checking glob.h usability... yes checking glob.h presence... yes checking for glob.h... yes checking prot.h usability... no checking prot.h presence... no checking for prot.h... no checking pwd.h usability... yes checking pwd.h presence... yes checking for pwd.h... yes checking grp.h usability... yes checking grp.h presence... yes checking for grp.h... yes checking sia.h usability... no checking sia.h presence... no checking for sia.h... no checking siad.h usability... no checking siad.h presence... no checking for siad.h... no checking for net/if.h... yes checking regex.h usability... yes checking regex.h presence... yes checking for regex.h... yes checking openssl/ssl.h usability... yes checking openssl/ssl.h presence... yes checking for openssl/ssl.h... yes checking openssl/crypto.h usability... yes checking openssl/crypto.h presence... yes checking for openssl/crypto.h... yes checking openssl/err.h usability... yes checking openssl/err.h presence... yes checking for openssl/err.h... yes checking openssl/evp.h usability... yes checking openssl/evp.h presence... yes checking for openssl/evp.h... yes checking openssl/engine.h usability... yes checking openssl/engine.h presence... yes checking for openssl/engine.h... yes checking for OpenSSL version >= 0.9.7... yes checking pcap.h usability... yes checking pcap.h presence... yes checking for pcap.h... yes checking for off_t... yes checking for pid_t... yes checking for size_t... yes checking for uid_t in sys/types.h... yes checking for socklen_t... yes checking for uint8_t... yes checking for uint16_t... yes checking for uint32_t... yes checking for struct in6_addr... yes checking for struct sockaddr_storage... yes checking for struct sockaddr_in6... yes checking for struct addrinfo... yes checking for getopt_long... yes checking for lockf... yes checking for strsignal... yes checking for sigaction... yes checking for sigprocmask... yes checking for pthread_sigmask... yes checking for snprintf... yes checking for vsnprintf... yes checking for setsid... yes checking for strncasecmp... yes checking for strcasecmp... yes checking for localtime_r... yes checking for ctime_r... yes checking for gmtime_r... yes checking for strsep... yes checking for inet_aton... yes checking for inet_pton... yes checking for inet_ntop... yes checking for setlinebuf... yes checking for setvbuf... yes checking for getusershell... yes checking for initgroups... yes checking for getaddrinfo... yes checking for getnameinfo... yes checking for closefrom... no checking for gettimeofday... yes checking for getpeereid... no checking for strlcat... no checking for strlcpy... no checking whether crypt must be declared... no checking whether strncasecmp must be declared... no checking whether strcasecmp must be declared... no checking whether inet_aton must be declared... no checking whether setlinebuf must be declared... no checking whether getusershell must be declared... no checking whether endusershell must be declared... no checking return type of signal handlers... void checking for ut_xtime in struct utmpx... no checking for ipi_addr in struct in_pktinfo... yes checking for ipi6_addr in struct in6_pktinfo... yes checking for an ANSI C-conforming const... yes checking type of OS... Linux checking for developer gcc flags... yes. Using -g -Wshadow -Wpointer-arith -Wcast-qual -Wcast-align -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -W -Wredundant-decls -Wundef checking for TLS... yes checking for crypt in -lcrypt... yes checking for setkey in -lcipher... no checking gethostbyaddr_r() syntax... GNU-style checking gethostbyname_r() syntax... GNU-style checking ctime_r() syntax... POSIX-style top_builddir=/root/radiusd configure: updating cache config.cache configure: error: conditional "INSTALL_LTDL" was never defined. Usually this means the macro was only invoked conditionally. make: *** [configure-stamp] Error 1
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html