Hi Kavya, You can bind radius on specific ip to have response from particular ip. If you check rad client from remote machine the case will be different. Regards Amit B. HTH Sent from my iPhone
On 22-Sep-2014, at 13:10, KAVYA PRABHAKAR <kavyamelinmaneprabhakar@gmail.com> wrote:
Hi,
I am beginner. I installed Freeradius in my windows PC. With default configuration it works as expected.
Now I have a RADIUS client which will send request to server and I want server to authenticate the same.
I should be changing users.conf
raduser User-Password == "Password" where User-name = "raduser" and Password = "Password"
I will have to change clients.conf as well.
client <ipaddr/mask>{ secret = secret shortname = client name # what is the significance of shortname }
In radiusd.conf, I have changed to which Ip and port RADIUS server has to listen to. (optional)
After doing respective changes, I will execute following command:
radtest raduser Password 10.253.6.11 1812 Password
The result is as follows:
C:\FreeRADIUS.net\bin>radclient.exe -d ..\etc\raddb -f radtest.txt -x -s 127.1 au th testing123 Sending Access-Request of id 108 to 127.0.0.1 port 1812 User-Name = "testuser" User-Password = "testpw" NAS-IP-Address = 127.0.0.1 NAS-Port = 123 rad_recv: Access-Accept packet from host 127.0.0.1:1812, id=108, length=20
Total approved auths: 1 Total denied auths: 0 Total lost auths: 0
Here I would like to know why am I getting reply from 127.0.0.1 when I have explicitly asked to receive from 10.253.6.11
PFA the debug log.
Thanks in advance, Kavya - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html