Hi all, We're using freeradius 3.0.4-6.el7 on RHEL 7, using LDAP authentication. The server is setup and running without problem. However, I got error when running radwho: -------------- cut here -------------------- ]# radwho Tue Jul 21 18:58:16 2015 : Error: /etc/raddb/sites-enabled/default[384]: Parse error in condition Tue Jul 21 18:58:16 2015 : Error: if ((ok || updated) && User-Password) { Tue Jul 21 18:58:16 2015 : Error: ^ Expected a module return code radwho: Error reading or parsing radiusd.conf -------------- cut here -------------------- I modified /etc/raddb/sites-enabled/default as following as mods-available/ldap mentioned: -------------- mods-available/ldap -------------------- # Note: set_auth_type was removed in v3.x.x # Equivalent functionality can be achieved by adding the following # stanza to the authorize {} section of your virtual server. # # ldap # if ((ok || updated) && User-Password) { # update { # control:Auth-Type := ldap # } # } -------------- cut here -------------------- -------------- /etc/raddb/sites-enabled/default -------------------- # # The ldap module reads passwords from the LDAP database. # -ldap ldap if ((ok || updated) && User-Password) { update { control:Auth-Type := ldap } } -------------- cut here -------------------- Did I miss anything? Besides, I'm new to freeradius 3.x and can't find doc about the meaning of the minus sign before module (e.g. "-ldap"). Would anyone please help? Thanks a lot. Regards, /ST Wong