Re: Help with EAP-TTLS and PAP

23 Nov 2015

      Sorry, stupid outlook.com web interface apparently always uses HTML.

Hey,
I know this gets asked a lot and I spent quite a while searching for my use case, but I couldn't find anything that helped me.
First a little bit about my setup:
We have a Sun DS with salted SHA1 passwords, freeradius 3.0.10, Aruba IAP-225 access points and Windows and OS X clients.
My goal is having the users log on to the WPA2 Enterprise wifi with their LDAP credentials and no client configuration whatsoever. This means I don't want to install network profiles on the Macs and no EAP-GTC plugins on the Windows machines.
...
From what I've read, this should be possible with EAP-TTLS and inner PAP, as PAP can work with salted SHA1 passwords. However, in all the setup guides I looked at, it said the eap module should use default_eap_type = ttls in the outer section and default_eap_type = md5 in the ttls section and then PAP should be used. I verified PAP is working and if I use EAP-TTLS with inner EAP-GTC my Macs can logon just fine.
So my question is now: what am I doing wrong? Is inner EAP-MD5 correct? Is what I'm trying to do even possible?

Any help is greatly appreciated!

Below the debug output of EAP-TTLS with inner EAP-MD5:

Copyright (C) 1999-2015 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/freeradius/dictionary
including configuration file /etc/freeradius/radiusd.conf
including configuration file /etc/freeradius/proxy.conf
including configuration file /etc/freeradius/clients.conf
including files in directory /etc/freeradius/mods-enabled/
including configuration file /etc/freeradius/mods-enabled/expiration
including configuration file /etc/freeradius/mods-enabled/dynamic_clients
including configuration file /etc/freeradius/mods-enabled/digest
including configuration file /etc/freeradius/mods-enabled/attr_filter
including configuration file /etc/freeradius/mods-enabled/utf8
including configuration file /etc/freeradius/mods-enabled/preprocess
including configuration file /etc/freeradius/mods-enabled/linelog
including configuration file /etc/freeradius/mods-enabled/always
including configuration file /etc/freeradius/mods-enabled/eap
including configuration file /etc/freeradius/mods-enabled/mschap
including configuration file /etc/freeradius/mods-enabled/unpack
including configuration file /etc/freeradius/mods-enabled/ntlm_auth
including configuration file /etc/freeradius/mods-enabled/radutmp
including configuration file /etc/freeradius/mods-enabled/detail.log
including configuration file /etc/freeradius/mods-enabled/soh
including configuration file /etc/freeradius/mods-enabled/detail
including configuration file /etc/freeradius/mods-enabled/unix
including configuration file /etc/freeradius/mods-enabled/pap
including configuration file /etc/freeradius/mods-enabled/chap
including configuration file /etc/freeradius/mods-enabled/logintime
including configuration file /etc/freeradius/mods-enabled/realm
including configuration file /etc/freeradius/mods-enabled/sradutmp
including configuration file /etc/freeradius/mods-enabled/files
including configuration file /etc/freeradius/mods-enabled/ldap
including configuration file /etc/freeradius/mods-enabled/echo
including configuration file /etc/freeradius/mods-enabled/cache_eap
including configuration file /etc/freeradius/mods-enabled/expr
including configuration file /etc/freeradius/mods-enabled/exec
including configuration file /etc/freeradius/mods-enabled/replicate
including configuration file /etc/freeradius/mods-enabled/passwd
including files in directory /etc/freeradius/policy.d/
including configuration file /etc/freeradius/policy.d/abfab-tr
including configuration file /etc/freeradius/policy.d/eap
including configuration file /etc/freeradius/policy.d/operator-name
including configuration file /etc/freeradius/policy.d/control
including configuration file /etc/freeradius/policy.d/canonicalization
including configuration file /etc/freeradius/policy.d/filter
including configuration file /etc/freeradius/policy.d/debug
including configuration file /etc/freeradius/policy.d/cui
including configuration file /etc/freeradius/policy.d/dhcp
including configuration file /etc/freeradius/policy.d/accounting
including files in directory /etc/freeradius/sites-enabled/
including configuration file /etc/freeradius/sites-enabled/inner-tunnel
including configuration file /etc/freeradius/sites-enabled/default
main {
 security {
 	user = "freerad"
 	group = "freerad"
 	allow_core_dumps = no
 }
	name = "freeradius"
	prefix = "/usr"
	localstatedir = "/var"
	logdir = "/var/log/freeradius"
	run_dir = "/var/run/freeradius"
}
main {
	name = "freeradius"
	prefix = "/usr"
	localstatedir = "/var"
	sbindir = "/usr/sbin"
	logdir = "/var/log/freeradius"
	run_dir = "/var/run/freeradius"
	libdir = "/usr/lib/freeradius"
	radacctdir = "/var/log/freeradius/radacct"
	hostname_lookups = no
	max_request_time = 30
	cleanup_delay = 5
	max_requests = 16384
	pidfile = "/var/run/freeradius/freeradius.pid"
	checkrad = "/usr/sbin/checkrad"
	debug_level = 0
	proxy_requests = yes
 log {
 	stripped_names = no
 	auth = no
 	auth_badpass = no
 	auth_goodpass = no
 	colourise = yes
 	msg_denied = "You are already logged in - access denied"
 }
 resources {
 }
 security {
 	max_attributes = 200
 	reject_delay = 1.000000
 	status_server = yes
 }
}
radiusd: #### Loading Realms and Home Servers ####
 proxy server {
 	retry_delay = 5
 	retry_count = 3
 	default_fallback = no
 	dead_time = 120
 	wake_all_if_all_dead = no
 }
 home_server localhost {
 	ipaddr = 127.0.0.1
 	port = 1812
 	type = "auth"
 	secret = <<< secret >>>
 	response_window = 20.000000
 	response_timeouts = 1
 	max_outstanding = 65536
 	zombie_period = 40
 	status_check = "status-server"
 	ping_interval = 30
 	check_interval = 30
 	check_timeout = 4
 	num_answers_to_alive = 3
 	revive_interval = 120
  limit {
  	max_connections = 16
  	max_requests = 0
  	lifetime = 0
  	idle_timeout = 0
  }
  coa {
  	irt = 2
  	mrt = 16
  	mrc = 5
  	mrd = 30
  }
 }
 home_server_pool my_auth_failover {
	type = fail-over
	home_server = localhost
 }
 realm example.com {
	auth_pool = my_auth_failover
 }
 realm LOCAL {
 }
radiusd: #### Loading Clients ####
 client localhost {
 	ipaddr = 127.0.0.1
 	require_message_authenticator = no
 	secret = <<< secret >>>
 	nas_type = "other"
 	proto = "*"
  limit {
  	max_connections = 16
  	lifetime = 0
  	idle_timeout = 30
  }
 }
 client localhost_ipv6 {
 	ipv6addr = ::1
 	require_message_authenticator = no
 	secret = <<< secret >>>
  limit {
  	max_connections = 16
  	lifetime = 0
  	idle_timeout = 30
  }
 }
 client <ip> {
 	require_message_authenticator = no
 	secret = <<< secret >>>
  limit {
  	max_connections = 16
  	lifetime = 0
  	idle_timeout = 30
  }
 }
No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client <ip>. Please fix your configuration
Support for old-style clients will be removed in a future release
Debugger not attached
 # Creating Auth-Type = digest
radiusd: #### Instantiating modules ####
  # Loaded module rlm_expiration
  # Loading module "expiration" from file /etc/freeradius/mods-enabled/expiration
  # Loaded module rlm_dynamic_clients
  # Loading module "dynamic_clients" from file /etc/freeradius/mods-enabled/dynamic_clients
  # Loaded module rlm_digest
  # Loading module "digest" from file /etc/freeradius/mods-enabled/digest
  # Loaded module rlm_attr_filter
  # Loading module "attr_filter.post-proxy" from file /etc/freeradius/mods-enabled/attr_filter
  attr_filter attr_filter.post-proxy {
  	filename = "/etc/freeradius/mods-config/attr_filter/post-proxy"
  	key = "%{Realm}"
  	relaxed = no
  }
  # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/mods-enabled/attr_filter
  attr_filter attr_filter.pre-proxy {
  	filename = "/etc/freeradius/mods-config/attr_filter/pre-proxy"
  	key = "%{Realm}"
  	relaxed = no
  }
  # Loading module "attr_filter.access_reject" from file /etc/freeradius/mods-enabled/attr_filter
  attr_filter attr_filter.access_reject {
  	filename = "/etc/freeradius/mods-config/attr_filter/access_reject"
  	key = "%{User-Name}"
  	relaxed = no
  }
  # Loading module "attr_filter.access_challenge" from file /etc/freeradius/mods-enabled/attr_filter
  attr_filter attr_filter.access_challenge {
  	filename = "/etc/freeradius/mods-config/attr_filter/access_challenge"
  	key = "%{User-Name}"
  	relaxed = no
  }
  # Loading module "attr_filter.accounting_response" from file /etc/freeradius/mods-enabled/attr_filter
  attr_filter attr_filter.accounting_response {
  	filename = "/etc/freeradius/mods-config/attr_filter/accounting_response"
  	key = "%{User-Name}"
  	relaxed = no
  }
  # Loaded module rlm_utf8
  # Loading module "utf8" from file /etc/freeradius/mods-enabled/utf8
  # Loaded module rlm_preprocess
  # Loading module "preprocess" from file /etc/freeradius/mods-enabled/preprocess
  preprocess {
  	huntgroups = "/etc/freeradius/mods-config/preprocess/huntgroups"
  	hints = "/etc/freeradius/mods-config/preprocess/hints"
  	with_ascend_hack = no
  	ascend_channels_per_line = 23
  	with_ntdomain_hack = no
  	with_specialix_jetstream_hack = no
  	with_cisco_vsa_hack = no
  	with_alvarion_vsa_hack = no
  }
  # Loaded module rlm_linelog
  # Loading module "linelog" from file /etc/freeradius/mods-enabled/linelog
  linelog {
  	filename = "/var/log/freeradius/linelog"
  	escape_filenames = no
  	syslog_severity = "info"
  	permissions = 384
  	format = "This is a log message for %{User-Name}"
  	reference = "messages.%{%{reply:Packet-Type}:-default}"
  }
  # Loading module "log_accounting" from file /etc/freeradius/mods-enabled/linelog
  linelog log_accounting {
  	filename = "/var/log/freeradius/linelog-accounting"
  	escape_filenames = no
  	syslog_severity = "info"
  	permissions = 384
  	format = ""
  	reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
  }
  # Loaded module rlm_always
  # Loading module "reject" from file /etc/freeradius/mods-enabled/always
  always reject {
  	rcode = "reject"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "fail" from file /etc/freeradius/mods-enabled/always
  always fail {
  	rcode = "fail"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "ok" from file /etc/freeradius/mods-enabled/always
  always ok {
  	rcode = "ok"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "handled" from file /etc/freeradius/mods-enabled/always
  always handled {
  	rcode = "handled"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "invalid" from file /etc/freeradius/mods-enabled/always
  always invalid {
  	rcode = "invalid"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "userlock" from file /etc/freeradius/mods-enabled/always
  always userlock {
  	rcode = "userlock"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "notfound" from file /etc/freeradius/mods-enabled/always
  always notfound {
  	rcode = "notfound"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "noop" from file /etc/freeradius/mods-enabled/always
  always noop {
  	rcode = "noop"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "updated" from file /etc/freeradius/mods-enabled/always
  always updated {
  	rcode = "updated"
  	simulcount = 0
  	mpp = no
  }
  # Loaded module rlm_eap
  # Loading module "eap" from file /etc/freeradius/mods-enabled/eap
  eap {
  	default_eap_type = "ttls"
  	timer_expire = 60
  	ignore_unknown_eap_types = no
  	cisco_accounting_username_bug = no
  	max_sessions = 16384
  }
  # Loaded module rlm_mschap
  # Loading module "mschap" from file /etc/freeradius/mods-enabled/mschap
  mschap {
  	use_mppe = yes
  	require_encryption = no
  	require_strong = no
  	with_ntdomain_hack = yes
   passchange {
   }
  	allow_retry = yes
  }
  # Loaded module rlm_unpack
  # Loading module "unpack" from file /etc/freeradius/mods-enabled/unpack
  # Loaded module rlm_exec
  # Loading module "ntlm_auth" from file /etc/freeradius/mods-enabled/ntlm_auth
  exec ntlm_auth {
  	wait = yes
  	program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}"
  	shell_escape = yes
  }
  # Loaded module rlm_radutmp
  # Loading module "radutmp" from file /etc/freeradius/mods-enabled/radutmp
  radutmp {
  	filename = "/var/log/freeradius/radutmp"
  	username = "%{User-Name}"
  	case_sensitive = yes
  	check_with_nas = yes
  	permissions = 384
  	caller_id = yes
  }
  # Loaded module rlm_detail
  # Loading module "auth_log" from file /etc/freeradius/mods-enabled/detail.log
  detail auth_log {
  	filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
  	header = "%t"
  	permissions = 384
  	locking = no
  	escape_filenames = no
  	log_packet_header = no
  }
  # Loading module "reply_log" from file /etc/freeradius/mods-enabled/detail.log
  detail reply_log {
  	filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
  	header = "%t"
  	permissions = 384
  	locking = no
  	escape_filenames = no
  	log_packet_header = no
  }
  # Loading module "pre_proxy_log" from file /etc/freeradius/mods-enabled/detail.log
  detail pre_proxy_log {
  	filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
  	header = "%t"
  	permissions = 384
  	locking = no
  	escape_filenames = no
  	log_packet_header = no
  }
  # Loading module "post_proxy_log" from file /etc/freeradius/mods-enabled/detail.log
  detail post_proxy_log {
  	filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
  	header = "%t"
  	permissions = 384
  	locking = no
  	escape_filenames = no
  	log_packet_header = no
  }
  # Loaded module rlm_soh
  # Loading module "soh" from file /etc/freeradius/mods-enabled/soh
  soh {
  	dhcp = yes
  }
  # Loading module "detail" from file /etc/freeradius/mods-enabled/detail
  detail {
  	filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
  	header = "%t"
  	permissions = 384
  	locking = no
  	escape_filenames = no
  	log_packet_header = no
  }
  # Loaded module rlm_unix
  # Loading module "unix" from file /etc/freeradius/mods-enabled/unix
  unix {
  	radwtmp = "/var/log/freeradius/radwtmp"
  }
Creating attribute Unix-Group
  # Loaded module rlm_pap
  # Loading module "pap" from file /etc/freeradius/mods-enabled/pap
  pap {
  	normalise = yes
  }
  # Loaded module rlm_chap
  # Loading module "chap" from file /etc/freeradius/mods-enabled/chap
  # Loaded module rlm_logintime
  # Loading module "logintime" from file /etc/freeradius/mods-enabled/logintime
  logintime {
  	minimum_timeout = 60
  }
  # Loaded module rlm_realm
  # Loading module "IPASS" from file /etc/freeradius/mods-enabled/realm
  realm IPASS {
  	format = "prefix"
  	delimiter = "/"
  	ignore_default = no
  	ignore_null = no
  }
  # Loading module "suffix" from file /etc/freeradius/mods-enabled/realm
  realm suffix {
  	format = "suffix"
  	delimiter = "@"
  	ignore_default = no
  	ignore_null = no
  }
  # Loading module "realmpercent" from file /etc/freeradius/mods-enabled/realm
  realm realmpercent {
  	format = "suffix"
  	delimiter = "%"
  	ignore_default = no
  	ignore_null = no
  }
  # Loading module "ntdomain" from file /etc/freeradius/mods-enabled/realm
  realm ntdomain {
  	format = "prefix"
  	delimiter = "\\"
  	ignore_default = no
  	ignore_null = no
  }
  # Loading module "sradutmp" from file /etc/freeradius/mods-enabled/sradutmp
  radutmp sradutmp {
  	filename = "/var/log/freeradius/sradutmp"
  	username = "%{User-Name}"
  	case_sensitive = yes
  	check_with_nas = yes
  	permissions = 420
  	caller_id = no
  }
  # Loaded module rlm_files
  # Loading module "files" from file /etc/freeradius/mods-enabled/files
  files {
  	filename = "/etc/freeradius/mods-config/files/authorize"
  	acctusersfile = "/etc/freeradius/mods-config/files/accounting"
  	preproxy_usersfile = "/etc/freeradius/mods-config/files/pre-proxy"
  }
  # Loaded module rlm_ldap
  # Loading module "ldap" from file /etc/freeradius/mods-enabled/ldap
  ldap {
  	server = "ldaps://<url>"
  	port = 636
  	identity = "uid=xxx,ou=xxx,dc=xxx,dc=xxx"
  	password = <<< secret >>>
   sasl {
   }
   user {
   	scope = "sub"
   	access_positive = yes
    sasl {
    }
   }
   group {
   	filter = "(objectClass=posixGroup)"
   	scope = "sub"
   	name_attribute = "cn"
   	membership_attribute = "isMemberOf"
   	cacheable_name = no
   	cacheable_dn = no
   }
   client {
   	filter = "(objectClass=radiusClient)"
   	scope = "sub"
   	base_dn = "dc=xxx,dc=xxx"
   }
   profile {
   }
   options {
   	ldap_debug = 40
   	chase_referrals = yes
   	rebind = yes
   	net_timeout = 1
   	res_timeout = 10
   	srv_timelimit = 3
   	idle = 60
   	probes = 3
   	interval = 3
   }
   tls {
   	start_tls = no
   	require_cert = "never"
   }
  }
Creating attribute LDAP-Group
  # Loading module "echo" from file /etc/freeradius/mods-enabled/echo
  exec echo {
  	wait = yes
  	program = "/bin/echo %{User-Name}"
  	input_pairs = "request"
  	output_pairs = "reply"
  	shell_escape = yes
  }
  # Loaded module rlm_cache
  # Loading module "cache_eap" from file /etc/freeradius/mods-enabled/cache_eap
  cache cache_eap {
  	driver = "rlm_cache_rbtree"
  	key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
  	ttl = 15
  	max_entries = 0
  	epoch = 0
  	add_stats = no
  }
  # Loaded module rlm_expr
  # Loading module "expr" from file /etc/freeradius/mods-enabled/expr
  expr {
  	safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
  }
  # Loading module "exec" from file /etc/freeradius/mods-enabled/exec
  exec {
  	wait = no
  	input_pairs = "request"
  	shell_escape = yes
  	timeout = 10
  }
  # Loaded module rlm_replicate
  # Loading module "replicate" from file /etc/freeradius/mods-enabled/replicate
  # Loaded module rlm_passwd
  # Loading module "etc_passwd" from file /etc/freeradius/mods-enabled/passwd
  passwd etc_passwd {
  	filename = "/etc/passwd"
  	format = "*User-Name:Crypt-Password:"
  	delimiter = ":"
  	ignore_nislike = no
  	ignore_empty = yes
  	allow_multiple_keys = no
  	hash_size = 100
  }
 instantiate {
 }
 modules {
  # Instantiating module "expiration" from file /etc/freeradius/mods-enabled/expiration
  # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/post-proxy
  # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/pre-proxy
  # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/access_reject
[/etc/freeradius/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" 	found in filter list for realm "DEFAULT". 
[/etc/freeradius/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" 	found in filter list for realm "DEFAULT". 
  # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/access_challenge
  # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/accounting_response
  # Instantiating module "preprocess" from file /etc/freeradius/mods-enabled/preprocess
reading pairlist file /etc/freeradius/mods-config/preprocess/huntgroups
reading pairlist file /etc/freeradius/mods-config/preprocess/hints
  # Instantiating module "linelog" from file /etc/freeradius/mods-enabled/linelog
  # Instantiating module "log_accounting" from file /etc/freeradius/mods-enabled/linelog
  # Instantiating module "reject" from file /etc/freeradius/mods-enabled/always
  # Instantiating module "fail" from file /etc/freeradius/mods-enabled/always
  # Instantiating module "ok" from file /etc/freeradius/mods-enabled/always
  # Instantiating module "handled" from file /etc/freeradius/mods-enabled/always
  # Instantiating module "invalid" from file /etc/freeradius/mods-enabled/always
  # Instantiating module "userlock" from file /etc/freeradius/mods-enabled/always
  # Instantiating module "notfound" from file /etc/freeradius/mods-enabled/always
  # Instantiating module "noop" from file /etc/freeradius/mods-enabled/always
  # Instantiating module "updated" from file /etc/freeradius/mods-enabled/always
  # Instantiating module "eap" from file /etc/freeradius/mods-enabled/eap
   # Linked to sub-module rlm_eap_md5
   # Linked to sub-module rlm_eap_leap
   # Linked to sub-module rlm_eap_gtc
   gtc {
   	challenge = "Password: "
   	auth_type = "PAP"
   }
   # Linked to sub-module rlm_eap_tls
   tls {
   	tls = "tls-common"
   }
   tls-config tls-common {
   	rsa_key_exchange = no
   	dh_key_exchange = yes
   	rsa_key_length = 512
   	dh_key_length = 512
   	verify_depth = 0
   	ca_path = "/etc/freeradius/certs"
   	pem_file_type = yes
   	private_key_file = "/etc/freeradius/certs/server.pem"
   	certificate_file = "/etc/freeradius/certs/server.pem"
   	ca_file = "/etc/freeradius/certs/ca.pem"
   	private_key_password = <<< secret >>>
   	dh_file = "/etc/freeradius/certs/dh"
   	fragment_size = 1024
   	include_length = yes
   	check_crl = no
   	check_all_crl = no
   	cipher_list = "DEFAULT"
   	ecdh_curve = "prime256v1"
    cache {
    	enable = yes
    	lifetime = 24
    	max_entries = 255
    }
    verify {
    }
    ocsp {
    	enable = no
    	override_cert_url = yes
    	url = "http://127.0.0.1/ocsp/"
    	use_nonce = yes
    	timeout = 0
    	softfail = no
    }
   }
   # Linked to sub-module rlm_eap_ttls
   ttls {
   	tls = "tls-common"
   	default_eap_type = "md5"
   	copy_request_to_tunnel = no
   	use_tunneled_reply = no
   	virtual_server = "inner-tunnel"
   	include_length = yes
   	require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_peap
   peap {
   	tls = "tls-common"
   	default_eap_type = "mschapv2"
   	copy_request_to_tunnel = no
   	use_tunneled_reply = no
   	proxy_tunneled_request_as_eap = yes
   	virtual_server = "inner-tunnel"
   	soh = no
   	require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_mschapv2
   mschapv2 {
   	with_ntdomain_hack = no
   	send_error = no
   }
  # Instantiating module "mschap" from file /etc/freeradius/mods-enabled/mschap
rlm_mschap (mschap): using internal authentication
  # Instantiating module "auth_log" from file /etc/freeradius/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output
  # Instantiating module "reply_log" from file /etc/freeradius/mods-enabled/detail.log
  # Instantiating module "pre_proxy_log" from file /etc/freeradius/mods-enabled/detail.log
  # Instantiating module "post_proxy_log" from file /etc/freeradius/mods-enabled/detail.log
  # Instantiating module "detail" from file /etc/freeradius/mods-enabled/detail
  # Instantiating module "pap" from file /etc/freeradius/mods-enabled/pap
  # Instantiating module "logintime" from file /etc/freeradius/mods-enabled/logintime
  # Instantiating module "IPASS" from file /etc/freeradius/mods-enabled/realm
  # Instantiating module "suffix" from file /etc/freeradius/mods-enabled/realm
  # Instantiating module "realmpercent" from file /etc/freeradius/mods-enabled/realm
  # Instantiating module "ntdomain" from file /etc/freeradius/mods-enabled/realm
  # Instantiating module "files" from file /etc/freeradius/mods-enabled/files
reading pairlist file /etc/freeradius/mods-config/files/authorize
reading pairlist file /etc/freeradius/mods-config/files/accounting
reading pairlist file /etc/freeradius/mods-config/files/pre-proxy
  # Instantiating module "ldap" from file /etc/freeradius/mods-enabled/ldap
rlm_ldap: libldap vendor: OpenLDAP, version: 20431
   accounting {
   	reference = "%{tolower:type.%{Acct-Status-Type}}"
   }
   post-auth {
   	reference = "."
   }
rlm_ldap (ldap): Initialising connection pool
   pool {
   	start = 5
   	min = 3
   	max = 32
   	spare = 10
   	uses = 0
   	lifetime = 0
   	cleanup_interval = 30
   	idle_timeout = 60
   	retry_delay = 30
   	spread = no
   }
rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots used
rlm_ldap (ldap): Connecting to ldaps://<url>:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots used
rlm_ldap (ldap): Connecting to ldaps://<url>:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots used
rlm_ldap (ldap): Connecting to ldaps://<url>:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots used
rlm_ldap (ldap): Connecting to ldaps://<url>:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots used
rlm_ldap (ldap): Connecting to ldaps://<url>:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
  # Instantiating module "cache_eap" from file /etc/freeradius/mods-enabled/cache_eap
rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked
  # Instantiating module "etc_passwd" from file /etc/freeradius/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
 } # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/freeradius/radiusd.conf
} # server
server inner-tunnel { # from file /etc/freeradius/sites-enabled/inner-tunnel
 # Loading authenticate {...}
 # Loading authorize {...}
Ignoring "sql" (see raddb/mods-available/README.rst)
 # Loading session {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
} # server inner-tunnel
server default { # from file /etc/freeradius/sites-enabled/default
 # Loading authenticate {...}
 # Loading authorize {...}
 # Loading preacct {...}
 # Loading accounting {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
} # server default
radiusd: #### Opening IP addresses and Ports ####
listen {
  	type = "auth"
  	ipaddr = 127.0.0.1
  	port = 18120
}
listen {
  	type = "auth"
  	ipaddr = *
  	port = 0
   limit {
   	max_connections = 16
   	lifetime = 0
   	idle_timeout = 30
   }
}
listen {
  	type = "acct"
  	ipaddr = *
  	port = 0
   limit {
   	max_connections = 16
   	lifetime = 0
   	idle_timeout = 30
   }
}
listen {
  	type = "auth"
  	ipv6addr = ::
  	port = 0
   limit {
   	max_connections = 16
   	lifetime = 0
   	idle_timeout = 30
   }
}
listen {
  	type = "acct"
  	ipv6addr = ::
  	port = 0
   limit {
   	max_connections = 16
   	lifetime = 0
   	idle_timeout = 30
   }
}
Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
Listening on auth address * port 1812 bound to server default
Listening on acct address * port 1813 bound to server default
Listening on auth address :: port 1812 bound to server default
Listening on acct address :: port 1813 bound to server default
Listening on proxy address * port 53683
Listening on proxy address :: port 41662
Ready to process requests
(0) Received Access-Request Id 67 from <ip>:59898 to <ip>:1812 length 201
(0)   User-Name = "hans.hering"
(0)   NAS-IP-Address = <ip>
(0)   NAS-Port = 0
(0)   NAS-Identifier = "<ip>"
(0)   NAS-Port-Type = Wireless-802.11
(0)   Calling-Station-Id = "4400100e904c"
(0)   Called-Station-Id = "186472cd167a"
(0)   Service-Type = Login-User
(0)   Framed-MTU = 1100
(0)   EAP-Message = 0x020100100168616e732e686572696e67
(0)   Aruba-Essid-Name = "<ssid>"
(0)   Aruba-Location-Id = "<apname>"
(0)   Aruba-AP-Group = "<apname>"
(0)   Message-Authenticator = 0x4cb828b841364e2b93bf7cd49d37cd93
(0) # Executing section authorize from file /etc/freeradius/sites-enabled/default
(0)   authorize {
(0)     policy filter_username {
(0)       if (!&User-Name) {
(0)       if (!&User-Name)  -> FALSE
(0)       if (&User-Name =~ / /) {
(0)       if (&User-Name =~ / /)  -> FALSE
(0)       if (&User-Name =~ /@.*@/ ) {
(0)       if (&User-Name =~ /@.*@/ )  -> FALSE
(0)       if (&User-Name =~ /\.\./ ) {
(0)       if (&User-Name =~ /\.\./ )  -> FALSE
(0)       if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(0)       if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(0)       if (&User-Name =~ /\.$/)  {
(0)       if (&User-Name =~ /\.$/)   -> FALSE
(0)       if (&User-Name =~ /@\./)  {
(0)       if (&User-Name =~ /@\./)   -> FALSE
(0)     } # policy filter_username = notfound
(0)     [preprocess] = ok
(0)     [chap] = noop
(0)     [mschap] = noop
(0)     [digest] = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: No '@' in User-Name = "hans.hering", looking up realm NULL
(0) suffix: No such realm "NULL"
(0)     [suffix] = noop
(0) eap: Peer sent EAP Response (code 2) ID 1 length 16
(0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize
(0)     [eap] = ok
(0)   } # authorize = ok
(0) Found Auth-Type = EAP
(0) # Executing group from file /etc/freeradius/sites-enabled/default
(0)   authenticate {
(0) eap: Peer sent packet with method EAP Identity (1)
(0) eap: Calling submodule eap_ttls to process data
(0) eap_ttls: Initiating new EAP-TLS session
(0) eap_ttls: Flushing SSL sessions (of #0)
(0) eap_ttls: [eaptls start] = request
(0) eap: Sending EAP Request (code 1) ID 2 length 6
(0) eap: EAP session adding &reply:State = 0x8aa7dbf48aa5ce2f
(0)     [eap] = handled
(0)   } # authenticate = handled
(0) Using Post-Auth-Type Challenge
(0) Post-Auth-Type sub-section not found.  Ignoring.
(0) # Executing group from file /etc/freeradius/sites-enabled/default
(0) Sent Access-Challenge Id 67 from <ip>:1812 to <ip>:59898 length 0
(0)   EAP-Message = 0x010200061520
(0)   Message-Authenticator = 0x00000000000000000000000000000000
(0)   State = 0x8aa7dbf48aa5ce2f8993e0490c51278d
(0) Finished request
Waking up in 4.9 seconds.
(1) Received Access-Request Id 68 from <ip>:59898 to <ip>:1812 length 346
(1)   User-Name = "hans.hering"
(1)   NAS-IP-Address = <ip>
(1)   NAS-Port = 0
(1)   NAS-Identifier = "<ip>"
(1)   NAS-Port-Type = Wireless-802.11
(1)   Calling-Station-Id = "4400100e904c"
(1)   Called-Station-Id = "186472cd167a"
(1)   Service-Type = Login-User
(1)   Framed-MTU = 1100
(1)   EAP-Message = 0x0202008f15800000008516030100800100007c03015652d246ab03a55f379e0aba7bb683d2d8dbcc4d28270098815788bf8fbde73b00003400ffc02cc02bc024c023c00ac009c008c030c02fc028c027c014c013c012009d009c003d003c0035002f000ac007c011000500040100001f000a0008000600
(1)   State = 0x8aa7dbf48aa5ce2f8993e0490c51278d
(1)   Aruba-Essid-Name = "<ssid>"
(1)   Aruba-Location-Id = "<apname>"
(1)   Aruba-AP-Group = "<apname>"
(1)   Message-Authenticator = 0xa5b6bb20d994d289ff9bb012b9f6de16
(1) session-state: No cached attributes
(1) # Executing section authorize from file /etc/freeradius/sites-enabled/default
(1)   authorize {
(1)     policy filter_username {
(1)       if (!&User-Name) {
(1)       if (!&User-Name)  -> FALSE
(1)       if (&User-Name =~ / /) {
(1)       if (&User-Name =~ / /)  -> FALSE
(1)       if (&User-Name =~ /@.*@/ ) {
(1)       if (&User-Name =~ /@.*@/ )  -> FALSE
(1)       if (&User-Name =~ /\.\./ ) {
(1)       if (&User-Name =~ /\.\./ )  -> FALSE
(1)       if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(1)       if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(1)       if (&User-Name =~ /\.$/)  {
(1)       if (&User-Name =~ /\.$/)   -> FALSE
(1)       if (&User-Name =~ /@\./)  {
(1)       if (&User-Name =~ /@\./)   -> FALSE
(1)     } # policy filter_username = notfound
(1)     [preprocess] = ok
(1)     [chap] = noop
(1)     [mschap] = noop
(1)     [digest] = noop
(1) suffix: Checking for suffix after "@"
(1) suffix: No '@' in User-Name = "hans.hering", looking up realm NULL
(1) suffix: No such realm "NULL"
(1)     [suffix] = noop
(1) eap: Peer sent EAP Response (code 2) ID 2 length 143
(1) eap: Continuing tunnel setup
(1)     [eap] = ok
(1)   } # authorize = ok
(1) Found Auth-Type = EAP
(1) # Executing group from file /etc/freeradius/sites-enabled/default
(1)   authenticate {
(1) eap: Expiring EAP session with state 0x8aa7dbf48aa5ce2f
(1) eap: Finished EAP session with state 0x8aa7dbf48aa5ce2f
(1) eap: Previous EAP request found for state 0x8aa7dbf48aa5ce2f, released from the list
(1) eap: Peer sent packet with method EAP TTLS (21)
(1) eap: Calling submodule eap_ttls to process data
(1) eap_ttls: Authenticate
(1) eap_ttls: Continuing EAP-TLS
(1) eap_ttls: Peer indicated complete TLS record size will be 133 bytes
(1) eap_ttls: Got complete TLS record (133 bytes)
(1) eap_ttls: [eaptls verify] = length included
(1) eap_ttls: (other): before/accept initialization
(1) eap_ttls: TLS_accept: before/accept initialization
(1) eap_ttls: <<< TLS 1.0 Handshake [length 0080], ClientHello 
(1) eap_ttls: TLS_accept: SSLv3 read client hello A
(1) eap_ttls: >>> TLS 1.0 Handshake [length 0059], ServerHello 
(1) eap_ttls: TLS_accept: SSLv3 write server hello A
(1) eap_ttls: >>> TLS 1.0 Handshake [length 08d3], Certificate 
(1) eap_ttls: TLS_accept: SSLv3 write certificate A
(1) eap_ttls: >>> TLS 1.0 Handshake [length 014b], ServerKeyExchange 
(1) eap_ttls: TLS_accept: SSLv3 write key exchange A
(1) eap_ttls: >>> TLS 1.0 Handshake [length 0004], ServerHelloDone 
(1) eap_ttls: TLS_accept: SSLv3 write server done A
(1) eap_ttls: TLS_accept: SSLv3 flush data
(1) eap_ttls: TLS_accept: Need to read more data: SSLv3 read client certificate A
(1) eap_ttls: TLS_accept: Need to read more data: SSLv3 read client certificate A
(1) eap_ttls: In SSL Handshake Phase
(1) eap_ttls: In SSL Accept mode
(1) eap_ttls: [eaptls process] = handled
(1) eap: Sending EAP Request (code 1) ID 3 length 1004
(1) eap: EAP session adding &reply:State = 0x8aa7dbf48ba4ce2f
(1)     [eap] = handled
(1)   } # authenticate = handled
(1) Using Post-Auth-Type Challenge
(1) Post-Auth-Type sub-section not found.  Ignoring.
(1) # Executing group from file /etc/freeradius/sites-enabled/default
(1) Sent Access-Challenge Id 68 from <ip>:1812 to <ip>:59898 length 0
(1)   EAP-Message = 0x010303ec15c000000a8f16030100590200005503011f5637fc9907abb382f150b602d77e2cac29c21821752b2155fc5cb32e35fbdb20fb97b440265d98e05f08c2cb560622317f8389869d8117036e6e371dcfbf81d5c01400000dff01000100000b00040300010216030108d30b0008cf0008cc0003de
(1)   Message-Authenticator = 0x00000000000000000000000000000000
(1)   State = 0x8aa7dbf48ba4ce2f8993e0490c51278d
(1) Finished request
Waking up in 4.9 seconds.
(2) Received Access-Request Id 69 from <ip>:59898 to <ip>:1812 length 209
(2)   User-Name = "hans.hering"
(2)   NAS-IP-Address = <ip>
(2)   NAS-Port = 0
(2)   NAS-Identifier = "<ip>"
(2)   NAS-Port-Type = Wireless-802.11
(2)   Calling-Station-Id = "4400100e904c"
(2)   Called-Station-Id = "186472cd167a"
(2)   Service-Type = Login-User
(2)   Framed-MTU = 1100
(2)   EAP-Message = 0x020300061500
(2)   State = 0x8aa7dbf48ba4ce2f8993e0490c51278d
(2)   Aruba-Essid-Name = "<ssid>"
(2)   Aruba-Location-Id = "<apname>"
(2)   Aruba-AP-Group = "<apname>"
(2)   Message-Authenticator = 0x4ae0edce92e6af687df75c1ec8123562
(2) session-state: No cached attributes
(2) # Executing section authorize from file /etc/freeradius/sites-enabled/default
(2)   authorize {
(2)     policy filter_username {
(2)       if (!&User-Name) {
(2)       if (!&User-Name)  -> FALSE
(2)       if (&User-Name =~ / /) {
(2)       if (&User-Name =~ / /)  -> FALSE
(2)       if (&User-Name =~ /@.*@/ ) {
(2)       if (&User-Name =~ /@.*@/ )  -> FALSE
(2)       if (&User-Name =~ /\.\./ ) {
(2)       if (&User-Name =~ /\.\./ )  -> FALSE
(2)       if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(2)       if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(2)       if (&User-Name =~ /\.$/)  {
(2)       if (&User-Name =~ /\.$/)   -> FALSE
(2)       if (&User-Name =~ /@\./)  {
(2)       if (&User-Name =~ /@\./)   -> FALSE
(2)     } # policy filter_username = notfound
(2)     [preprocess] = ok
(2)     [chap] = noop
(2)     [mschap] = noop
(2)     [digest] = noop
(2) suffix: Checking for suffix after "@"
(2) suffix: No '@' in User-Name = "hans.hering", looking up realm NULL
(2) suffix: No such realm "NULL"
(2)     [suffix] = noop
(2) eap: Peer sent EAP Response (code 2) ID 3 length 6
(2) eap: Continuing tunnel setup
(2)     [eap] = ok
(2)   } # authorize = ok
(2) Found Auth-Type = EAP
(2) # Executing group from file /etc/freeradius/sites-enabled/default
(2)   authenticate {
(2) eap: Expiring EAP session with state 0x8aa7dbf48ba4ce2f
(2) eap: Finished EAP session with state 0x8aa7dbf48ba4ce2f
(2) eap: Previous EAP request found for state 0x8aa7dbf48ba4ce2f, released from the list
(2) eap: Peer sent packet with method EAP TTLS (21)
(2) eap: Calling submodule eap_ttls to process data
(2) eap_ttls: Authenticate
(2) eap_ttls: Continuing EAP-TLS
(2) eap_ttls: Peer ACKed our handshake fragment
(2) eap_ttls: [eaptls verify] = request
(2) eap_ttls: [eaptls process] = handled
(2) eap: Sending EAP Request (code 1) ID 4 length 1004
(2) eap: EAP session adding &reply:State = 0x8aa7dbf488a3ce2f
(2)     [eap] = handled
(2)   } # authenticate = handled
(2) Using Post-Auth-Type Challenge
(2) Post-Auth-Type sub-section not found.  Ignoring.
(2) # Executing group from file /etc/freeradius/sites-enabled/default
(2) Sent Access-Challenge Id 69 from <ip>:1812 to <ip>:59898 length 0
(2)   EAP-Message = 0x010403ec15c000000a8fdd874ace35d935909eb41f076af54637807355b0c44328651be631d0fac4d2c6e81f9c4b8c711b5bb5dc1da68ec9f28dd8ebb18ee0bb6f63cff5d2b1c22fe1408af1ce00ae298e0c0151ac505915f8aaec5535d093ec63ad9ddc05e9ae8b8ba4442133a51318f8c3b90004e830
(2)   Message-Authenticator = 0x00000000000000000000000000000000
(2)   State = 0x8aa7dbf488a3ce2f8993e0490c51278d
(2) Finished request
Waking up in 4.9 seconds.
(3) Received Access-Request Id 70 from <ip>:59898 to <ip>:1812 length 209
(3)   User-Name = "hans.hering"
(3)   NAS-IP-Address = <ip>
(3)   NAS-Port = 0
(3)   NAS-Identifier = "<ip>"
(3)   NAS-Port-Type = Wireless-802.11
(3)   Calling-Station-Id = "4400100e904c"
(3)   Called-Station-Id = "186472cd167a"
(3)   Service-Type = Login-User
(3)   Framed-MTU = 1100
(3)   EAP-Message = 0x020400061500
(3)   State = 0x8aa7dbf488a3ce2f8993e0490c51278d
(3)   Aruba-Essid-Name = "<ssid>"
(3)   Aruba-Location-Id = "<apname>"
(3)   Aruba-AP-Group = "<apname>"
(3)   Message-Authenticator = 0xac0e164f6b96849c48af9d3908b63255
(3) session-state: No cached attributes
(3) # Executing section authorize from file /etc/freeradius/sites-enabled/default
(3)   authorize {
(3)     policy filter_username {
(3)       if (!&User-Name) {
(3)       if (!&User-Name)  -> FALSE
(3)       if (&User-Name =~ / /) {
(3)       if (&User-Name =~ / /)  -> FALSE
(3)       if (&User-Name =~ /@.*@/ ) {
(3)       if (&User-Name =~ /@.*@/ )  -> FALSE
(3)       if (&User-Name =~ /\.\./ ) {
(3)       if (&User-Name =~ /\.\./ )  -> FALSE
(3)       if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(3)       if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(3)       if (&User-Name =~ /\.$/)  {
(3)       if (&User-Name =~ /\.$/)   -> FALSE
(3)       if (&User-Name =~ /@\./)  {
(3)       if (&User-Name =~ /@\./)   -> FALSE
(3)     } # policy filter_username = notfound
(3)     [preprocess] = ok
(3)     [chap] = noop
(3)     [mschap] = noop
(3)     [digest] = noop
(3) suffix: Checking for suffix after "@"
(3) suffix: No '@' in User-Name = "hans.hering", looking up realm NULL
(3) suffix: No such realm "NULL"
(3)     [suffix] = noop
(3) eap: Peer sent EAP Response (code 2) ID 4 length 6
(3) eap: Continuing tunnel setup
(3)     [eap] = ok
(3)   } # authorize = ok
(3) Found Auth-Type = EAP
(3) # Executing group from file /etc/freeradius/sites-enabled/default
(3)   authenticate {
(3) eap: Expiring EAP session with state 0x8aa7dbf488a3ce2f
(3) eap: Finished EAP session with state 0x8aa7dbf488a3ce2f
(3) eap: Previous EAP request found for state 0x8aa7dbf488a3ce2f, released from the list
(3) eap: Peer sent packet with method EAP TTLS (21)
(3) eap: Calling submodule eap_ttls to process data
(3) eap_ttls: Authenticate
(3) eap_ttls: Continuing EAP-TLS
(3) eap_ttls: Peer ACKed our handshake fragment
(3) eap_ttls: [eaptls verify] = request
(3) eap_ttls: [eaptls process] = handled
(3) eap: Sending EAP Request (code 1) ID 5 length 725
(3) eap: EAP session adding &reply:State = 0x8aa7dbf489a2ce2f
(3)     [eap] = handled
(3)   } # authenticate = handled
(3) Using Post-Auth-Type Challenge
(3) Post-Auth-Type sub-section not found.  Ignoring.
(3) # Executing group from file /etc/freeradius/sites-enabled/default
(3) Sent Access-Challenge Id 70 from <ip>:1812 to <ip>:59898 length 0
(3)   EAP-Message = 0x010502d5158000000a8f20417574686f72697479820900da1ed77d3b2c8ff1300f0603551d130101ff040530030101ff30360603551d1f042f302d302ba029a0278625687474703a2f2f7777772e6578616d706c652e6f72672f6578616d706c655f63612e63726c300d06092a864886f70d01010b0500
(3)   Message-Authenticator = 0x00000000000000000000000000000000
(3)   State = 0x8aa7dbf489a2ce2f8993e0490c51278d
(3) Finished request
Waking up in 4.8 seconds.
(4) Received Access-Request Id 71 from <ip>:59898 to <ip>:1812 length 347
(4)   User-Name = "hans.hering"
(4)   NAS-IP-Address = <ip>
(4)   NAS-Port = 0
(4)   NAS-Identifier = "<ip>"
(4)   NAS-Port-Type = Wireless-802.11
(4)   Calling-Station-Id = "4400100e904c"
(4)   Called-Station-Id = "186472cd167a"
(4)   Service-Type = Login-User
(4)   Framed-MTU = 1100
(4)   EAP-Message = 0x0205009015800000008616030100461000004241043d059fc34d75c809e28246cbef26b5353671cc04f909f887bcda2bfb46e9c5c3c7c5739285ff557b4dc0124534d952022cf360cbb002e29b8e6010ef9eeff15b1403010001011603010030954522307e8512ca2a646e52885316cf319a305831139d
(4)   State = 0x8aa7dbf489a2ce2f8993e0490c51278d
(4)   Aruba-Essid-Name = "<ssid>"
(4)   Aruba-Location-Id = "<apname>"
(4)   Aruba-AP-Group = "<apname>"
(4)   Message-Authenticator = 0xefbaccdfebd1d3f906dffd267d63b3d4
(4) session-state: No cached attributes
(4) # Executing section authorize from file /etc/freeradius/sites-enabled/default
(4)   authorize {
(4)     policy filter_username {
(4)       if (!&User-Name) {
(4)       if (!&User-Name)  -> FALSE
(4)       if (&User-Name =~ / /) {
(4)       if (&User-Name =~ / /)  -> FALSE
(4)       if (&User-Name =~ /@.*@/ ) {
(4)       if (&User-Name =~ /@.*@/ )  -> FALSE
(4)       if (&User-Name =~ /\.\./ ) {
(4)       if (&User-Name =~ /\.\./ )  -> FALSE
(4)       if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(4)       if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(4)       if (&User-Name =~ /\.$/)  {
(4)       if (&User-Name =~ /\.$/)   -> FALSE
(4)       if (&User-Name =~ /@\./)  {
(4)       if (&User-Name =~ /@\./)   -> FALSE
(4)     } # policy filter_username = notfound
(4)     [preprocess] = ok
(4)     [chap] = noop
(4)     [mschap] = noop
(4)     [digest] = noop
(4) suffix: Checking for suffix after "@"
(4) suffix: No '@' in User-Name = "hans.hering", looking up realm NULL
(4) suffix: No such realm "NULL"
(4)     [suffix] = noop
(4) eap: Peer sent EAP Response (code 2) ID 5 length 144
(4) eap: Continuing tunnel setup
(4)     [eap] = ok
(4)   } # authorize = ok
(4) Found Auth-Type = EAP
(4) # Executing group from file /etc/freeradius/sites-enabled/default
(4)   authenticate {
(4) eap: Expiring EAP session with state 0x8aa7dbf489a2ce2f
(4) eap: Finished EAP session with state 0x8aa7dbf489a2ce2f
(4) eap: Previous EAP request found for state 0x8aa7dbf489a2ce2f, released from the list
(4) eap: Peer sent packet with method EAP TTLS (21)
(4) eap: Calling submodule eap_ttls to process data
(4) eap_ttls: Authenticate
(4) eap_ttls: Continuing EAP-TLS
(4) eap_ttls: Peer indicated complete TLS record size will be 134 bytes
(4) eap_ttls: Got complete TLS record (134 bytes)
(4) eap_ttls: [eaptls verify] = length included
(4) eap_ttls: <<< TLS 1.0 Handshake [length 0046], ClientKeyExchange 
(4) eap_ttls: TLS_accept: SSLv3 read client key exchange A
(4) eap_ttls: <<< TLS 1.0 ChangeCipherSpec [length 0001] 
(4) eap_ttls: <<< TLS 1.0 Handshake [length 0010], Finished 
(4) eap_ttls: TLS_accept: SSLv3 read finished A
(4) eap_ttls: >>> TLS 1.0 ChangeCipherSpec [length 0001] 
(4) eap_ttls: TLS_accept: SSLv3 write change cipher spec A
(4) eap_ttls: >>> TLS 1.0 Handshake [length 0010], Finished 
(4) eap_ttls: TLS_accept: SSLv3 write finished A
(4) eap_ttls: TLS_accept: SSLv3 flush data
(4) eap_ttls: (other): SSL negotiation finished successfully
(4) eap_ttls: SSL Connection Established
(4) eap_ttls: [eaptls process] = handled
(4) eap: Sending EAP Request (code 1) ID 6 length 69
(4) eap: EAP session adding &reply:State = 0x8aa7dbf48ea1ce2f
(4)     [eap] = handled
(4)   } # authenticate = handled
(4) Using Post-Auth-Type Challenge
(4) Post-Auth-Type sub-section not found.  Ignoring.
(4) # Executing group from file /etc/freeradius/sites-enabled/default
(4) Sent Access-Challenge Id 71 from <ip>:1812 to <ip>:59898 length 0
(4)   EAP-Message = 0x0106004515800000003b14030100010116030100303df00af3f5b715f6f8a2e59efbbcd7cf2e70d4d3391ec7706b0e96ace65e108dab33d36f365c0040c5b627503d501828
(4)   Message-Authenticator = 0x00000000000000000000000000000000
(4)   State = 0x8aa7dbf48ea1ce2f8993e0490c51278d
(4) Finished request
Waking up in 4.8 seconds.
(5) Received Access-Request Id 72 from <ip>:59898 to <ip>:1812 length 266
(5)   User-Name = "hans.hering"
(5)   NAS-IP-Address = <ip>
(5)   NAS-Port = 0
(5)   NAS-Identifier = "<ip>"
(5)   NAS-Port-Type = Wireless-802.11
(5)   Calling-Station-Id = "4400100e904c"
(5)   Called-Station-Id = "186472cd167a"
(5)   Service-Type = Login-User
(5)   Framed-MTU = 1100
(5)   EAP-Message = 0x0206003f1580000000351703010030c39c440ecadb79d70661f5c2457440ae369e59eb3b10505f97b78b5d96cc87fb563fb5cb5edc6057e18560f1b7fafcfd
(5)   State = 0x8aa7dbf48ea1ce2f8993e0490c51278d
(5)   Aruba-Essid-Name = "<ssid>"
(5)   Aruba-Location-Id = "<apname>"
(5)   Aruba-AP-Group = "<apname>"
(5)   Message-Authenticator = 0x63c04f4574a68ea285f031dc5bda5089
(5) session-state: No cached attributes
(5) # Executing section authorize from file /etc/freeradius/sites-enabled/default
(5)   authorize {
(5)     policy filter_username {
(5)       if (!&User-Name) {
(5)       if (!&User-Name)  -> FALSE
(5)       if (&User-Name =~ / /) {
(5)       if (&User-Name =~ / /)  -> FALSE
(5)       if (&User-Name =~ /@.*@/ ) {
(5)       if (&User-Name =~ /@.*@/ )  -> FALSE
(5)       if (&User-Name =~ /\.\./ ) {
(5)       if (&User-Name =~ /\.\./ )  -> FALSE
(5)       if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(5)       if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(5)       if (&User-Name =~ /\.$/)  {
(5)       if (&User-Name =~ /\.$/)   -> FALSE
(5)       if (&User-Name =~ /@\./)  {
(5)       if (&User-Name =~ /@\./)   -> FALSE
(5)     } # policy filter_username = notfound
(5)     [preprocess] = ok
(5)     [chap] = noop
(5)     [mschap] = noop
(5)     [digest] = noop
(5) suffix: Checking for suffix after "@"
(5) suffix: No '@' in User-Name = "hans.hering", looking up realm NULL
(5) suffix: No such realm "NULL"
(5)     [suffix] = noop
(5) eap: Peer sent EAP Response (code 2) ID 6 length 63
(5) eap: Continuing tunnel setup
(5)     [eap] = ok
(5)   } # authorize = ok
(5) Found Auth-Type = EAP
(5) # Executing group from file /etc/freeradius/sites-enabled/default
(5)   authenticate {
(5) eap: Expiring EAP session with state 0x8aa7dbf48ea1ce2f
(5) eap: Finished EAP session with state 0x8aa7dbf48ea1ce2f
(5) eap: Previous EAP request found for state 0x8aa7dbf48ea1ce2f, released from the list
(5) eap: Peer sent packet with method EAP TTLS (21)
(5) eap: Calling submodule eap_ttls to process data
(5) eap_ttls: Authenticate
(5) eap_ttls: Continuing EAP-TLS
(5) eap_ttls: Peer indicated complete TLS record size will be 53 bytes
(5) eap_ttls: Got complete TLS record (53 bytes)
(5) eap_ttls: [eaptls verify] = length included
(5) eap_ttls: [eaptls process] = ok
(5) eap_ttls: Session established.  Proceeding to decode tunneled attributes
(5) eap_ttls: Got tunneled request
(5) eap_ttls:   EAP-Message = 0x020000100168616e732e686572696e67
(5) eap_ttls: Got tunneled identity of hans.hering
(5) eap_ttls: Setting default EAP type for tunneled EAP session
(5) eap_ttls: Sending tunneled request
(5) Virtual server inner-tunnel received request
(5)   EAP-Message = 0x020000100168616e732e686572696e67
(5)   User-Name = "hans.hering"
(5) server inner-tunnel {
(5)   # Executing section authorize from file /etc/freeradius/sites-enabled/inner-tunnel
(5)     authorize {
(5)       [chap] = noop
(5)       [mschap] = noop
(5) suffix: Checking for suffix after "@"
(5) suffix: No '@' in User-Name = "hans.hering", looking up realm NULL
(5) suffix: No such realm "NULL"
(5)       [suffix] = noop
(5)       update control {
(5)         &Proxy-To-Realm := LOCAL
(5)       } # update control = noop
(5) eap: Peer sent EAP Response (code 2) ID 0 length 16
(5) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize
(5)       [eap] = ok
(5)     } # authorize = ok
(5)   Found Auth-Type = EAP
(5)   # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel
(5)     authenticate {
(5) eap: Peer sent packet with method EAP Identity (1)
(5) eap: Calling submodule eap_md5 to process data
(5) eap_md5: Issuing MD5 Challenge
(5) eap: Sending EAP Request (code 1) ID 1 length 22
(5) eap: EAP session adding &reply:State = 0x47026ba347036f9f
(5)       [eap] = handled
(5)     } # authenticate = handled
(5) } # server inner-tunnel
(5) Virtual server sending reply
(5)   EAP-Message = 0x01010016041081dfab5920bbad29c708489ae35dc75f
(5)   Message-Authenticator = 0x00000000000000000000000000000000
(5)   State = 0x47026ba347036f9fb85e0642fabc31d4
(5) eap_ttls: Got tunneled Access-Challenge
(5) eap: Sending EAP Request (code 1) ID 7 length 79
(5) eap: EAP session adding &reply:State = 0x8aa7dbf48fa0ce2f
(5)     [eap] = handled
(5)   } # authenticate = handled
(5) Using Post-Auth-Type Challenge
(5) Post-Auth-Type sub-section not found.  Ignoring.
(5) # Executing group from file /etc/freeradius/sites-enabled/default
(5) Sent Access-Challenge Id 72 from <ip>:1812 to <ip>:59898 length 0
(5)   EAP-Message = 0x0107004f1580000000451703010040c1a48501dcf5e2b5d4a72196219fa0f279498885465d123a4c95d6490ec55d1496b6503b8410ce0b7c568fc6e46440e90e4730eb8883c0e71a858916a1a66354
(5)   Message-Authenticator = 0x00000000000000000000000000000000
(5)   State = 0x8aa7dbf48fa0ce2f8993e0490c51278d
(5) Finished request
Waking up in 4.7 seconds.
(6) Received Access-Request Id 73 from <ip>:59898 to <ip>:1812 length 298
(6)   User-Name = "hans.hering"
(6)   NAS-IP-Address = <ip>
(6)   NAS-Port = 0
(6)   NAS-Identifier = "<ip>"
(6)   NAS-Port-Type = Wireless-802.11
(6)   Calling-Station-Id = "4400100e904c"
(6)   Called-Station-Id = "186472cd167a"
(6)   Service-Type = Login-User
(6)   Framed-MTU = 1100
(6)   EAP-Message = 0x0207005f1580000000551703010050e5017cf29ca351ffb06cf4226e56c7883502556146fae26cdf965b030636de8a2610906ac579874eddfd9f70e78328af1248d230f5341da8e86db06d17154a8da3f6531540e5a2d35d4bc51e942c9beb
(6)   State = 0x8aa7dbf48fa0ce2f8993e0490c51278d
(6)   Aruba-Essid-Name = "<ssid>"
(6)   Aruba-Location-Id = "<apname>"
(6)   Aruba-AP-Group = "<apname>"
(6)   Message-Authenticator = 0x68cac7c8d75f2ff01b8a0e0ab93beeb6
(6) session-state: No cached attributes
(6) # Executing section authorize from file /etc/freeradius/sites-enabled/default
(6)   authorize {
(6)     policy filter_username {
(6)       if (!&User-Name) {
(6)       if (!&User-Name)  -> FALSE
(6)       if (&User-Name =~ / /) {
(6)       if (&User-Name =~ / /)  -> FALSE
(6)       if (&User-Name =~ /@.*@/ ) {
(6)       if (&User-Name =~ /@.*@/ )  -> FALSE
(6)       if (&User-Name =~ /\.\./ ) {
(6)       if (&User-Name =~ /\.\./ )  -> FALSE
(6)       if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(6)       if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(6)       if (&User-Name =~ /\.$/)  {
(6)       if (&User-Name =~ /\.$/)   -> FALSE
(6)       if (&User-Name =~ /@\./)  {
(6)       if (&User-Name =~ /@\./)   -> FALSE
(6)     } # policy filter_username = notfound
(6)     [preprocess] = ok
(6)     [chap] = noop
(6)     [mschap] = noop
(6)     [digest] = noop
(6) suffix: Checking for suffix after "@"
(6) suffix: No '@' in User-Name = "hans.hering", looking up realm NULL
(6) suffix: No such realm "NULL"
(6)     [suffix] = noop
(6) eap: Peer sent EAP Response (code 2) ID 7 length 95
(6) eap: Continuing tunnel setup
(6)     [eap] = ok
(6)   } # authorize = ok
(6) Found Auth-Type = EAP
(6) # Executing group from file /etc/freeradius/sites-enabled/default
(6)   authenticate {
(6) eap: Expiring EAP session with state 0x47026ba347036f9f
(6) eap: Finished EAP session with state 0x8aa7dbf48fa0ce2f
(6) eap: Previous EAP request found for state 0x8aa7dbf48fa0ce2f, released from the list
(6) eap: Peer sent packet with method EAP TTLS (21)
(6) eap: Calling submodule eap_ttls to process data
(6) eap_ttls: Authenticate
(6) eap_ttls: Continuing EAP-TLS
(6) eap_ttls: Peer indicated complete TLS record size will be 85 bytes
(6) eap_ttls: Got complete TLS record (85 bytes)
(6) eap_ttls: [eaptls verify] = length included
(6) eap_ttls: [eaptls process] = ok
(6) eap_ttls: Session established.  Proceeding to decode tunneled attributes
(6) eap_ttls: Got tunneled request
(6) eap_ttls:   EAP-Message = 0x020100210410a1caf80086694cc7efcdb9214433cb1f68616e732e686572696e67
(6) eap_ttls: Sending tunneled request
(6) Virtual server inner-tunnel received request
(6)   EAP-Message = 0x020100210410a1caf80086694cc7efcdb9214433cb1f68616e732e686572696e67
(6)   User-Name = "hans.hering"
(6)   State = 0x47026ba347036f9fb85e0642fabc31d4
(6) server inner-tunnel {
(6)   session-state: No cached attributes
(6)   # Executing section authorize from file /etc/freeradius/sites-enabled/inner-tunnel
(6)     authorize {
(6)       [chap] = noop
(6)       [mschap] = noop
(6) suffix: Checking for suffix after "@"
(6) suffix: No '@' in User-Name = "hans.hering", looking up realm NULL
(6) suffix: No such realm "NULL"
(6)       [suffix] = noop
(6)       update control {
(6)         &Proxy-To-Realm := LOCAL
(6)       } # update control = noop
(6) eap: Peer sent EAP Response (code 2) ID 1 length 33
(6) eap: No EAP Start, assuming it's an on-going EAP conversation
(6)       [eap] = updated
(6)       [files] = noop
rlm_ldap (ldap): Reserved connection (0)
(6) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}})
(6) ldap:    --> (uid=hans.hering)
(6) ldap: Performing search in "dc=xxx,dc=xxx" with filter "(uid=hans.hering)", scope "sub"
(6) ldap: Waiting for search result...
(6) ldap: User object found at DN "uid=hans.hering,ou=xxx,dc=xxx,dc=xxx"
(6) ldap: Processing user attributes
(6) ldap: control:Password-With-Header += '{SSHA}IiE+U9IKv4ttaILiThSWbftqrdBOSERS0nuCKQ=='
rlm_ldap (ldap): Released connection (0)
rlm_ldap (ldap): Need 5 more connections to reach 10 spares
rlm_ldap (ldap): Opening additional connection (5), 1 of 27 pending slots used
rlm_ldap (ldap): Connecting to ldaps://<url>:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
(6)       [ldap] = updated
(6)       [expiration] = noop
(6)       [logintime] = noop
(6) pap: Converted: Password-With-Header -> SSHA1-Password
(6) pap: Removing &control:Password-With-Header
(6) pap: Normalizing SSHA1-Password from base64 encoding, 40 bytes -> 28 bytes
(6) pap: WARNING: Auth-Type already set.  Not setting to PAP
(6)       [pap] = noop
(6)     } # authorize = updated
(6)   Found Auth-Type = EAP
(6)   # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel
(6)     authenticate {
(6) eap: Expiring EAP session with state 0x47026ba347036f9f
(6) eap: Finished EAP session with state 0x47026ba347036f9f
(6) eap: Previous EAP request found for state 0x47026ba347036f9f, released from the list
(6) eap: Peer sent packet with method EAP MD5 (4)
(6) eap: Calling submodule eap_md5 to process data
(6) eap_md5: Cleartext-Password is required for EAP-MD5 authentication
(6) eap: ERROR: Failed continuing EAP MD5 (4) session.  EAP sub-module failed
(6) eap: Sending EAP Failure (code 4) ID 1 length 4
(6) eap: Failed in EAP select
(6)       [eap] = invalid
(6)     } # authenticate = invalid
(6)   Failed to authenticate the user
(6)   Using Post-Auth-Type Reject
(6)   # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel
(6)     Post-Auth-Type REJECT {
(6) attr_filter.access_reject: EXPAND %{User-Name}
(6) attr_filter.access_reject:    --> hans.hering
(6) attr_filter.access_reject: Matched entry DEFAULT at line 11
(6)       [attr_filter.access_reject] = updated
(6)       update outer.session-state {
(6)         &Module-Failure-Message := &request:Module-Failure-Message -> 'eap: Failed continuing EAP MD5 (4) session.  EAP sub-module failed'
(6)       } # update outer.session-state = noop
(6)     } # Post-Auth-Type REJECT = updated
(6) } # server inner-tunnel
(6) Virtual server sending reply
(6)   EAP-Message = 0x04010004
(6)   Message-Authenticator = 0x00000000000000000000000000000000
(6) eap_ttls: Got tunneled Access-Reject
(6) eap: ERROR: Failed continuing EAP TTLS (21) session.  EAP sub-module failed
(6) eap: Sending EAP Failure (code 4) ID 7 length 4
(6) eap: Failed in EAP select
(6)     [eap] = invalid
(6)   } # authenticate = invalid
(6) Failed to authenticate the user
(6) Using Post-Auth-Type Reject
(6) # Executing group from file /etc/freeradius/sites-enabled/default
(6)   Post-Auth-Type REJECT {
(6) attr_filter.access_reject: EXPAND %{User-Name}
(6) attr_filter.access_reject:    --> hans.hering
(6) attr_filter.access_reject: Matched entry DEFAULT at line 11
(6)     [attr_filter.access_reject] = updated
(6)     [eap] = noop
(6)     policy remove_reply_message_if_eap {
(6)       if (&reply:EAP-Message && &reply:Reply-Message) {
(6)       if (&reply:EAP-Message && &reply:Reply-Message)  -> FALSE
(6)       else {
(6)         [noop] = noop
(6)       } # else = noop
(6)     } # policy remove_reply_message_if_eap = noop
(6)   } # Post-Auth-Type REJECT = updated
(6) Delaying response for 1.000000 seconds
Waking up in 0.2 seconds.
Waking up in 0.7 seconds.
(6) Sending delayed response
(6) Sent Access-Reject Id 73 from <ip>:1812 to <ip>:59898 length 44
(6)   EAP-Message = 0x04070004
(6)   Message-Authenticator = 0x00000000000000000000000000000000
Waking up in 3.6 seconds.
(0) Cleaning up request packet ID 67 with timestamp +24
(1) Cleaning up request packet ID 68 with timestamp +24
(2) Cleaning up request packet ID 69 with timestamp +24
(3) Cleaning up request packet ID 70 with timestamp +24
(4) Cleaning up request packet ID 71 with timestamp +24
(5) Cleaning up request packet ID 72 with timestamp +25
(6) Cleaning up request packet ID 73 with timestamp +25
Ready to process requests

Re: Help with EAP-TTLS and PAP

Hans Hering