Hello, thanks for the replys and hints! I wanted to reach back to document for others and ask further questions. Am 11.01.17 um 19:03 schrieb Alan DeKok:
On Jan 11, 2017, at 12:05 PM, Staiger, Moritz (RRZE) <moritz.staiger@fau.de> wrote:
Do you have other hints or suggestions?
Put all of the policies into the "inner-tunnel" virtual server. Delete the "users" file entries. Don't set "Auth-Type = LDAP". Separate the authentication rules from the VLAN policies.
in "inner-tunnel" virtual server, "authorize" section:
if ((&LDAP-Group == "901") && (Packet-Src-IP-Address != 10.0.0.1)) { reject } ... do the same for other LDAP groups and Packet-Src-IP-Address ...
Ok that works.
in "inner-tunnel" virtual server, "post-auth" section:
if (&LDAP-Group == "admin") { ... assign VLAN 10 ... } else if (&LDAP-Group == "Operators") { ... assign VLAN 20 ... } # else VLAN is assigned from radiusTunnelPrivateGroupId
update { &outer.session-state::Tunnel-Type += &reply:Tunnel-Type[*] &outer.session-state::Tunnel-Medium-Type += &reply:Tunnel-Medium-Type[*] &outer.session-state::Tunnel-Private-Group-Id += &reply:Tunnel-Private-Group-Id[*] outer.session-state::User-Name += &reply:User-Name[*] }
I have implemented it like this (changed :: to : and += to := to replace the attribute) # LDAP group Admins if (&LDAP-Group == "admin") { update { &outer.session-state:Tunnel-Type := 13 &outer.session-state:Tunnel-Medium-Type := 6 &outer.session-state:Tunnel-Private-Group-Id := "10" &outer.session-state:User-Name := User-Name[*] } } # LDAP group Operators elsif (&LDAP-Group == "operators") { update { &outer.session-state:Tunnel-Type := 13 &outer.session-state:Tunnel-Medium-Type := 6 &outer.session-state:Tunnel-Private-Group-Id := "20" &outer.session-state:User-Name := User-Name[*] } } # else VLAN is assigned from radiusTunnelPrivateGroupId in LDAP update { &outer.session-state:Tunnel-Type := Tunnel-Type[*] &outer.session-state:Tunnel-Medium-Type := Tunnel-Medium-Type[*] &outer.session-state:Tunnel-Private-Group-Id := Tunnel-Private-Group-Id[*] &outer.session-state:User-Name := User-Name[*] }
in "default" virtual server, "post-auth" section: ] update { &reply::Tunnel-Type += &session-state:Tunnel-Type[*] &reply::Tunnel-Medium-Type += &session-state:Tunnel-Medium-Type[*] &reply::Tunnel-Private-Group-Id += &session-state:Tunnel-Private-Group-Id[*] &reply::User-Name += &session-state:User-Name[*] }
I had implemented this and got multiple replys (so I removed it): (19) Sent Access-Accept Id 52 from 172.17.27.78:1812 to 172.17.26.160:21085 length 0 (19) MS-MPPE-Recv-Key = 0xc408a678d27fc369bb16c3488131ae65a112f72a6f71d79273fb55212ae72e6f (19) MS-MPPE-Send-Key = 0x799b7d7c2ce08a059749af83bdd50777aa981f3b79ce4638df618b70866e9d0c (19) EAP-Message = 0x03470004 (19) Message-Authenticator = 0x00000000000000000000000000000000 (19) User-Name = "test-a" (19) Tunnel-Type += VLAN (19) Tunnel-Medium-Type += IEEE-802 (19) Tunnel-Private-Group-Id += "481" (19) User-Name += "test-a" (19) Tunnel-Type += VLAN (19) Tunnel-Medium-Type += IEEE-802 (19) User-Name += "test-a" (19) Finished request The current output is this and I think it works so far but I can't find where the last User-Name += "test-a" in Access Accept comes from. Any other hints are welcome! Ready to process requests (0) Received Access-Request Id 172 from 172.17.26.160:43297 to 172.17.27.78:1812 length 164 (0) User-Name = "test-a" (0) NAS-Identifier = "44d9e7f96309" (0) NAS-Port = 0 (0) Called-Station-Id = "44-D9-E7-FA-63-09:test-rad-a1" (0) Calling-Station-Id = "60-A3-7D-2C-A2-19" (0) Framed-MTU = 1400 (0) NAS-Port-Type = Wireless-802.11 (0) Connect-Info = "CONNECT 0Mbps 802.11b" (0) EAP-Message = 0x02fd000b01746573742d61 (0) Message-Authenticator = 0xfc2e333af8adf8d61ff84782e34c3869 (0) # Executing section authorize from file /etc/freeradius/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /@\./) { (0) if (&User-Name =~ /@\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "test-a", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: Peer sent EAP Response (code 2) ID 253 length 11 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = eap (0) # Executing group from file /etc/freeradius/sites-enabled/default (0) authenticate { (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Calling submodule eap_peap to process data (0) eap_peap: Initiating new EAP-TLS session (0) eap_peap: Flushing SSL sessions (of #0) (0) eap_peap: [eaptls start] = request (0) eap: Sending EAP Request (code 1) ID 254 length 6 (0) eap: EAP session adding &reply:State = 0x9e07ab319ef9b214 (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) Post-Auth-Type sub-section not found. Ignoring. (0) # Executing group from file /etc/freeradius/sites-enabled/default (0) Sent Access-Challenge Id 172 from 172.17.27.78:1812 to 172.17.26.160:43297 length 0 (0) EAP-Message = 0x01fe00061920 (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0x9e07ab319ef9b2147db0651e6ba99830 (0) Finished request Waking up in 4.9 seconds. (1) Received Access-Request Id 173 from 172.17.26.160:43297 to 172.17.27.78:1812 length 298 (1) User-Name = "test-a" (1) NAS-Identifier = "44d9e7f96309" (1) NAS-Port = 0 (1) Called-Station-Id = "44-D9-E7-FA-63-09:test-rad-a1" (1) Calling-Station-Id = "60-A3-7D-2C-A2-19" (1) Framed-MTU = 1400 (1) NAS-Port-Type = Wireless-802.11 (1) Connect-Info = "CONNECT 0Mbps 802.11b" (1) EAP-Message = 0x02fe007f19800000007516030100700100006c0301588c58cd99b33ba73b9586ef356ab0961c31db61e069c4dc9afde8f514bbdef200002000ffc024c023c00ac009c008c028c027c014c013c012003d003c0035002f000a01000023000a00080006001700180019000b00020100000500050100000000 (1) State = 0x9e07ab319ef9b2147db0651e6ba99830 (1) Message-Authenticator = 0xa08f82b193165307e7621062607349f4 (1) session-state: No cached attributes (1) # Executing section authorize from file /etc/freeradius/sites-enabled/default (1) authorize { (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@[^@]*@/ ) { (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /@\./) { (1) if (&User-Name =~ /@\./) -> FALSE (1) } # if (&User-Name) = notfound (1) } # policy filter_username = notfound (1) [preprocess] = ok (1) [chap] = noop (1) [mschap] = noop (1) [digest] = noop (1) suffix: Checking for suffix after "@" (1) suffix: No '@' in User-Name = "test-a", looking up realm NULL (1) suffix: No such realm "NULL" (1) [suffix] = noop (1) eap: Peer sent EAP Response (code 2) ID 254 length 127 (1) eap: Continuing tunnel setup (1) [eap] = ok (1) } # authorize = ok (1) Found Auth-Type = eap (1) # Executing group from file /etc/freeradius/sites-enabled/default (1) authenticate { (1) eap: Expiring EAP session with state 0x9e07ab319ef9b214 (1) eap: Finished EAP session with state 0x9e07ab319ef9b214 (1) eap: Previous EAP request found for state 0x9e07ab319ef9b214, released from the list (1) eap: Peer sent packet with method EAP PEAP (25) (1) eap: Calling submodule eap_peap to process data (1) eap_peap: Continuing EAP-TLS (1) eap_peap: Peer indicated complete TLS record size will be 117 bytes (1) eap_peap: Got complete TLS record (117 bytes) (1) eap_peap: [eaptls verify] = length included (1) eap_peap: (other): before/accept initialization (1) eap_peap: TLS_accept: before/accept initialization (1) eap_peap: <<< recv TLS 1.0 Handshake [length 0070], ClientHello (1) eap_peap: TLS_accept: SSLv3 read client hello A (1) eap_peap: >>> send TLS 1.0 Handshake [length 0059], ServerHello (1) eap_peap: TLS_accept: SSLv3 write server hello A (1) eap_peap: >>> send TLS 1.0 Handshake [length 0973], Certificate (1) eap_peap: TLS_accept: SSLv3 write certificate A (1) eap_peap: >>> send TLS 1.0 Handshake [length 014b], ServerKeyExchange (1) eap_peap: TLS_accept: SSLv3 write key exchange A (1) eap_peap: >>> send TLS 1.0 Handshake [length 0004], ServerHelloDone (1) eap_peap: TLS_accept: SSLv3 write server done A (1) eap_peap: TLS_accept: SSLv3 flush data (1) eap_peap: TLS_accept: Need to read more data: SSLv3 read client certificate A (1) eap_peap: TLS_accept: Need to read more data: SSLv3 read client certificate A (1) eap_peap: In SSL Handshake Phase (1) eap_peap: In SSL Accept mode (1) eap_peap: [eaptls process] = handled (1) eap: Sending EAP Request (code 1) ID 255 length 1004 (1) eap: EAP session adding &reply:State = 0x9e07ab319ff8b214 (1) [eap] = handled (1) } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) Post-Auth-Type sub-section not found. Ignoring. (1) # Executing group from file /etc/freeradius/sites-enabled/default (1) Sent Access-Challenge Id 173 from 172.17.27.78:1812 to 172.17.26.160:43297 length 0 (1) EAP-Message = 0x01ff03ec19c000000b2f16030100590200005503011a930dd22b7f13caf6b38eb87a81d3381a406c102872d07740657decbb3cb52d2046f9d2817aaeb9ce63792258fec8297b8df858ae69e871e406934c04f0bb5293c01400000dff01000100000b00040300010216030109730b00096f00096c0004e9 (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0x9e07ab319ff8b2147db0651e6ba99830 (1) Finished request Waking up in 4.9 seconds. (2) Received Access-Request Id 174 from 172.17.26.160:43297 to 172.17.27.78:1812 length 177 (2) User-Name = "test-a" (2) NAS-Identifier = "44d9e7f96309" (2) NAS-Port = 0 (2) Called-Station-Id = "44-D9-E7-FA-63-09:test-rad-a1" (2) Calling-Station-Id = "60-A3-7D-2C-A2-19" (2) Framed-MTU = 1400 (2) NAS-Port-Type = Wireless-802.11 (2) Connect-Info = "CONNECT 0Mbps 802.11b" (2) EAP-Message = 0x02ff00061900 (2) State = 0x9e07ab319ff8b2147db0651e6ba99830 (2) Message-Authenticator = 0xc29e7499a7a02ba81bbd3ea99586b99e (2) session-state: No cached attributes (2) # Executing section authorize from file /etc/freeradius/sites-enabled/default (2) authorize { (2) policy filter_username { (2) if (&User-Name) { (2) if (&User-Name) -> TRUE (2) if (&User-Name) { (2) if (&User-Name =~ / /) { (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@[^@]*@/ ) { (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (2) if (&User-Name =~ /\.\./ ) { (2) if (&User-Name =~ /\.\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\.$/) { (2) if (&User-Name =~ /\.$/) -> FALSE (2) if (&User-Name =~ /@\./) { (2) if (&User-Name =~ /@\./) -> FALSE (2) } # if (&User-Name) = notfound (2) } # policy filter_username = notfound (2) [preprocess] = ok (2) [chap] = noop (2) [mschap] = noop (2) [digest] = noop (2) suffix: Checking for suffix after "@" (2) suffix: No '@' in User-Name = "test-a", looking up realm NULL (2) suffix: No such realm "NULL" (2) [suffix] = noop (2) eap: Peer sent EAP Response (code 2) ID 255 length 6 (2) eap: Continuing tunnel setup (2) [eap] = ok (2) } # authorize = ok (2) Found Auth-Type = eap (2) # Executing group from file /etc/freeradius/sites-enabled/default (2) authenticate { (2) eap: Expiring EAP session with state 0x9e07ab319ff8b214 (2) eap: Finished EAP session with state 0x9e07ab319ff8b214 (2) eap: Previous EAP request found for state 0x9e07ab319ff8b214, released from the list (2) eap: Peer sent packet with method EAP PEAP (25) (2) eap: Calling submodule eap_peap to process data (2) eap_peap: Continuing EAP-TLS (2) eap_peap: Peer ACKed our handshake fragment (2) eap_peap: [eaptls verify] = request (2) eap_peap: [eaptls process] = handled (2) eap: Sending EAP Request (code 1) ID 0 length 1000 (2) eap: EAP session adding &reply:State = 0x9e07ab319c07b214 (2) [eap] = handled (2) } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) Post-Auth-Type sub-section not found. Ignoring. (2) # Executing group from file /etc/freeradius/sites-enabled/default (2) Sent Access-Challenge Id 174 from 172.17.27.78:1812 to 172.17.26.160:43297 length 0 (2) EAP-Message = 0x010003e81940864886f70d0109011613696e666f4064732d6e6574776f726b732e6465311c301a0603550403131344532d6e6574776f726b7320526f6f7420434182010030130603551d25040c300a06082b06010505070301300b0603551d0f0404030205a0300d06092a864886f70d01010b05000382 (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0x9e07ab319c07b2147db0651e6ba99830 (2) Finished request Waking up in 4.9 seconds. (3) Received Access-Request Id 175 from 172.17.26.160:43297 to 172.17.27.78:1812 length 177 (3) User-Name = "test-a" (3) NAS-Identifier = "44d9e7f96309" (3) NAS-Port = 0 (3) Called-Station-Id = "44-D9-E7-FA-63-09:test-rad-a1" (3) Calling-Station-Id = "60-A3-7D-2C-A2-19" (3) Framed-MTU = 1400 (3) NAS-Port-Type = Wireless-802.11 (3) Connect-Info = "CONNECT 0Mbps 802.11b" (3) EAP-Message = 0x020000061900 (3) State = 0x9e07ab319c07b2147db0651e6ba99830 (3) Message-Authenticator = 0x017fcea8b7fae5108d01a9c72b4cf0bd (3) session-state: No cached attributes (3) # Executing section authorize from file /etc/freeradius/sites-enabled/default (3) authorize { (3) policy filter_username { (3) if (&User-Name) { (3) if (&User-Name) -> TRUE (3) if (&User-Name) { (3) if (&User-Name =~ / /) { (3) if (&User-Name =~ / /) -> FALSE (3) if (&User-Name =~ /@[^@]*@/ ) { (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (3) if (&User-Name =~ /\.\./ ) { (3) if (&User-Name =~ /\.\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /\.$/) { (3) if (&User-Name =~ /\.$/) -> FALSE (3) if (&User-Name =~ /@\./) { (3) if (&User-Name =~ /@\./) -> FALSE (3) } # if (&User-Name) = notfound (3) } # policy filter_username = notfound (3) [preprocess] = ok (3) [chap] = noop (3) [mschap] = noop (3) [digest] = noop (3) suffix: Checking for suffix after "@" (3) suffix: No '@' in User-Name = "test-a", looking up realm NULL (3) suffix: No such realm "NULL" (3) [suffix] = noop (3) eap: Peer sent EAP Response (code 2) ID 0 length 6 (3) eap: Continuing tunnel setup (3) [eap] = ok (3) } # authorize = ok (3) Found Auth-Type = eap (3) # Executing group from file /etc/freeradius/sites-enabled/default (3) authenticate { (3) eap: Expiring EAP session with state 0x9e07ab319c07b214 (3) eap: Finished EAP session with state 0x9e07ab319c07b214 (3) eap: Previous EAP request found for state 0x9e07ab319c07b214, released from the list (3) eap: Peer sent packet with method EAP PEAP (25) (3) eap: Calling submodule eap_peap to process data (3) eap_peap: Continuing EAP-TLS (3) eap_peap: Peer ACKed our handshake fragment (3) eap_peap: [eaptls verify] = request (3) eap_peap: [eaptls process] = handled (3) eap: Sending EAP Request (code 1) ID 1 length 881 (3) eap: EAP session adding &reply:State = 0x9e07ab319d06b214 (3) [eap] = handled (3) } # authenticate = handled (3) Using Post-Auth-Type Challenge (3) Post-Auth-Type sub-section not found. Ignoring. (3) # Executing group from file /etc/freeradius/sites-enabled/default (3) Sent Access-Challenge Id 175 from 172.17.27.78:1812 to 172.17.26.160:43297 length 0 (3) EAP-Message = 0x010103711900cd6b6a86ea145de10b316047370203010001a381e93081e6301d0603551d0e041604148cf1945262f33d0d656b8a1652dcfece15788e563081b60603551d230481ae3081ab80148cf1945262f33d0d656b8a1652dcfece15788e56a1818fa4818c308189310b3009060355040613024445 (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0x9e07ab319d06b2147db0651e6ba99830 (3) Finished request Waking up in 4.9 seconds. (4) Received Access-Request Id 176 from 172.17.26.160:43297 to 172.17.27.78:1812 length 315 (4) User-Name = "test-a" (4) NAS-Identifier = "44d9e7f96309" (4) NAS-Port = 0 (4) Called-Station-Id = "44-D9-E7-FA-63-09:test-rad-a1" (4) Calling-Station-Id = "60-A3-7D-2C-A2-19" (4) Framed-MTU = 1400 (4) NAS-Port-Type = Wireless-802.11 (4) Connect-Info = "CONNECT 0Mbps 802.11b" (4) EAP-Message = 0x020100901980000000861603010046100000424104e09676402090684dadae03a9e096e3d5a332ca26564283afe7e24b382a26d35f7a458bcb1a2fce5e93d98757c9da93096eeef85a93ef9686afafd0f3f041ff4414030100010116030100302329036ca75de430697f8bb907e812cef99329be76d18e (4) State = 0x9e07ab319d06b2147db0651e6ba99830 (4) Message-Authenticator = 0x235bdacff5a34ffafef1e57928386b62 (4) session-state: No cached attributes (4) # Executing section authorize from file /etc/freeradius/sites-enabled/default (4) authorize { (4) policy filter_username { (4) if (&User-Name) { (4) if (&User-Name) -> TRUE (4) if (&User-Name) { (4) if (&User-Name =~ / /) { (4) if (&User-Name =~ / /) -> FALSE (4) if (&User-Name =~ /@[^@]*@/ ) { (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (4) if (&User-Name =~ /\.\./ ) { (4) if (&User-Name =~ /\.\./ ) -> FALSE (4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (4) if (&User-Name =~ /\.$/) { (4) if (&User-Name =~ /\.$/) -> FALSE (4) if (&User-Name =~ /@\./) { (4) if (&User-Name =~ /@\./) -> FALSE (4) } # if (&User-Name) = notfound (4) } # policy filter_username = notfound (4) [preprocess] = ok (4) [chap] = noop (4) [mschap] = noop (4) [digest] = noop (4) suffix: Checking for suffix after "@" (4) suffix: No '@' in User-Name = "test-a", looking up realm NULL (4) suffix: No such realm "NULL" (4) [suffix] = noop (4) eap: Peer sent EAP Response (code 2) ID 1 length 144 (4) eap: Continuing tunnel setup (4) [eap] = ok (4) } # authorize = ok (4) Found Auth-Type = eap (4) # Executing group from file /etc/freeradius/sites-enabled/default (4) authenticate { (4) eap: Expiring EAP session with state 0x9e07ab319d06b214 (4) eap: Finished EAP session with state 0x9e07ab319d06b214 (4) eap: Previous EAP request found for state 0x9e07ab319d06b214, released from the list (4) eap: Peer sent packet with method EAP PEAP (25) (4) eap: Calling submodule eap_peap to process data (4) eap_peap: Continuing EAP-TLS (4) eap_peap: Peer indicated complete TLS record size will be 134 bytes (4) eap_peap: Got complete TLS record (134 bytes) (4) eap_peap: [eaptls verify] = length included (4) eap_peap: <<< recv TLS 1.0 Handshake [length 0046], ClientKeyExchange (4) eap_peap: TLS_accept: SSLv3 read client key exchange A (4) eap_peap: <<< recv TLS 1.0 ChangeCipherSpec [length 0001] (4) eap_peap: <<< recv TLS 1.0 Handshake [length 0010], Finished (4) eap_peap: TLS_accept: SSLv3 read finished A (4) eap_peap: >>> send TLS 1.0 ChangeCipherSpec [length 0001] (4) eap_peap: TLS_accept: SSLv3 write change cipher spec A (4) eap_peap: >>> send TLS 1.0 Handshake [length 0010], Finished (4) eap_peap: TLS_accept: SSLv3 write finished A (4) eap_peap: TLS_accept: SSLv3 flush data (4) eap_peap: (other): SSL negotiation finished successfully (4) eap_peap: SSL Connection Established (4) eap_peap: [eaptls process] = handled (4) eap: Sending EAP Request (code 1) ID 2 length 65 (4) eap: EAP session adding &reply:State = 0x9e07ab319a05b214 (4) [eap] = handled (4) } # authenticate = handled (4) Using Post-Auth-Type Challenge (4) Post-Auth-Type sub-section not found. Ignoring. (4) # Executing group from file /etc/freeradius/sites-enabled/default (4) Sent Access-Challenge Id 176 from 172.17.27.78:1812 to 172.17.26.160:43297 length 0 (4) EAP-Message = 0x01020041190014030100010116030100307e559e502e2de3ff55e8cb73bc3d24db53d8b334e98b749e48c4b85870e4517dc655357d734a39609b1de09136450a7c (4) Message-Authenticator = 0x00000000000000000000000000000000 (4) State = 0x9e07ab319a05b2147db0651e6ba99830 (4) Finished request Waking up in 4.8 seconds. (5) Received Access-Request Id 177 from 172.17.26.160:43297 to 172.17.27.78:1812 length 177 (5) User-Name = "test-a" (5) NAS-Identifier = "44d9e7f96309" (5) NAS-Port = 0 (5) Called-Station-Id = "44-D9-E7-FA-63-09:test-rad-a1" (5) Calling-Station-Id = "60-A3-7D-2C-A2-19" (5) Framed-MTU = 1400 (5) NAS-Port-Type = Wireless-802.11 (5) Connect-Info = "CONNECT 0Mbps 802.11b" (5) EAP-Message = 0x020200061900 (5) State = 0x9e07ab319a05b2147db0651e6ba99830 (5) Message-Authenticator = 0x729222fc52023352762fed3d36b6bc29 (5) session-state: No cached attributes (5) # Executing section authorize from file /etc/freeradius/sites-enabled/default (5) authorize { (5) policy filter_username { (5) if (&User-Name) { (5) if (&User-Name) -> TRUE (5) if (&User-Name) { (5) if (&User-Name =~ / /) { (5) if (&User-Name =~ / /) -> FALSE (5) if (&User-Name =~ /@[^@]*@/ ) { (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (5) if (&User-Name =~ /\.\./ ) { (5) if (&User-Name =~ /\.\./ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (5) if (&User-Name =~ /\.$/) { (5) if (&User-Name =~ /\.$/) -> FALSE (5) if (&User-Name =~ /@\./) { (5) if (&User-Name =~ /@\./) -> FALSE (5) } # if (&User-Name) = notfound (5) } # policy filter_username = notfound (5) [preprocess] = ok (5) [chap] = noop (5) [mschap] = noop (5) [digest] = noop (5) suffix: Checking for suffix after "@" (5) suffix: No '@' in User-Name = "test-a", looking up realm NULL (5) suffix: No such realm "NULL" (5) [suffix] = noop (5) eap: Peer sent EAP Response (code 2) ID 2 length 6 (5) eap: Continuing tunnel setup (5) [eap] = ok (5) } # authorize = ok (5) Found Auth-Type = eap (5) # Executing group from file /etc/freeradius/sites-enabled/default (5) authenticate { (5) eap: Expiring EAP session with state 0x9e07ab319a05b214 (5) eap: Finished EAP session with state 0x9e07ab319a05b214 (5) eap: Previous EAP request found for state 0x9e07ab319a05b214, released from the list (5) eap: Peer sent packet with method EAP PEAP (25) (5) eap: Calling submodule eap_peap to process data (5) eap_peap: Continuing EAP-TLS (5) eap_peap: Peer ACKed our handshake fragment. handshake is finished (5) eap_peap: [eaptls verify] = success (5) eap_peap: [eaptls process] = success (5) eap_peap: Session established. Decoding tunneled attributes (5) eap_peap: PEAP state TUNNEL ESTABLISHED (5) eap: Sending EAP Request (code 1) ID 3 length 43 (5) eap: EAP session adding &reply:State = 0x9e07ab319b04b214 (5) [eap] = handled (5) } # authenticate = handled (5) Using Post-Auth-Type Challenge (5) Post-Auth-Type sub-section not found. Ignoring. (5) # Executing group from file /etc/freeradius/sites-enabled/default (5) Sent Access-Challenge Id 177 from 172.17.27.78:1812 to 172.17.26.160:43297 length 0 (5) EAP-Message = 0x0103002b19001703010020a49cad063111d3a3a30e1c579f4fd7939fe0e73fa3a81015d4bec721174f0b15 (5) Message-Authenticator = 0x00000000000000000000000000000000 (5) State = 0x9e07ab319b04b2147db0651e6ba99830 (5) Finished request Waking up in 4.7 seconds. (6) Received Access-Request Id 178 from 172.17.26.160:43297 to 172.17.27.78:1812 length 214 (6) User-Name = "test-a" (6) NAS-Identifier = "44d9e7f96309" (6) NAS-Port = 0 (6) Called-Station-Id = "44-D9-E7-FA-63-09:test-rad-a1" (6) Calling-Station-Id = "60-A3-7D-2C-A2-19" (6) Framed-MTU = 1400 (6) NAS-Port-Type = Wireless-802.11 (6) Connect-Info = "CONNECT 0Mbps 802.11b" (6) EAP-Message = 0x0203002b19001703010020679c390d5c5667e92801880c21150ee32dc5ca4c651168a71da271fc5d6c58de (6) State = 0x9e07ab319b04b2147db0651e6ba99830 (6) Message-Authenticator = 0xcaf7f66ffdc42cbe2a2a4c72a00ebd7e (6) session-state: No cached attributes (6) # Executing section authorize from file /etc/freeradius/sites-enabled/default (6) authorize { (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@[^@]*@/ ) { (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /@\./) { (6) if (&User-Name =~ /@\./) -> FALSE (6) } # if (&User-Name) = notfound (6) } # policy filter_username = notfound (6) [preprocess] = ok (6) [chap] = noop (6) [mschap] = noop (6) [digest] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "test-a", looking up realm NULL (6) suffix: No such realm "NULL" (6) [suffix] = noop (6) eap: Peer sent EAP Response (code 2) ID 3 length 43 (6) eap: Continuing tunnel setup (6) [eap] = ok (6) } # authorize = ok (6) Found Auth-Type = eap (6) # Executing group from file /etc/freeradius/sites-enabled/default (6) authenticate { (6) eap: Expiring EAP session with state 0x9e07ab319b04b214 (6) eap: Finished EAP session with state 0x9e07ab319b04b214 (6) eap: Previous EAP request found for state 0x9e07ab319b04b214, released from the list (6) eap: Peer sent packet with method EAP PEAP (25) (6) eap: Calling submodule eap_peap to process data (6) eap_peap: Continuing EAP-TLS (6) eap_peap: [eaptls verify] = ok (6) eap_peap: Done initial handshake (6) eap_peap: [eaptls process] = ok (6) eap_peap: Session established. Decoding tunneled attributes (6) eap_peap: PEAP state WAITING FOR INNER IDENTITY (6) eap_peap: Identity - test-a (6) eap_peap: Got inner identity 'test-a' (6) eap_peap: Setting default EAP type for tunneled EAP session (6) eap_peap: Got tunneled request (6) eap_peap: EAP-Message = 0x0203000b01746573742d61 (6) eap_peap: Setting User-Name to test-a (6) eap_peap: Sending tunneled request to inner-tunnel (6) eap_peap: EAP-Message = 0x0203000b01746573742d61 (6) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (6) eap_peap: User-Name = "test-a" (6) Virtual server inner-tunnel received request (6) EAP-Message = 0x0203000b01746573742d61 (6) FreeRADIUS-Proxied-To = 127.0.0.1 (6) User-Name = "test-a" (6) WARNING: Outer and inner identities are the same. User privacy is compromised. (6) server inner-tunnel { (6) # Executing section authorize from file /etc/freeradius/sites-enabled/inner-tunnel (6) authorize { (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@[^@]*@/ ) { (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /@\./) { (6) if (&User-Name =~ /@\./) -> FALSE (6) } # if (&User-Name) = notfound (6) } # policy filter_username = notfound (6) if ((&LDAP-Group == "616") && (Packet-Src-IP-Address != 172.17.26.160)) { (6) Searching for user in group "616" rlm_ldap (ldap): Closing connection (0): Hit idle_timeout, was idle for 415 seconds rlm_ldap (ldap): Closing connection (1): Hit idle_timeout, was idle for 415 seconds rlm_ldap (ldap): Closing connection (2): Hit idle_timeout, was idle for 415 seconds rlm_ldap (ldap): You probably need to lower "min" rlm_ldap (ldap): Closing connection (3): Hit idle_timeout, was idle for 415 seconds rlm_ldap (ldap): You probably need to lower "min" rlm_ldap (ldap): Closing connection (4): Hit idle_timeout, was idle for 415 seconds rlm_ldap (ldap): You probably need to lower "min" rlm_ldap (ldap): 0 of 0 connections in use. You may need to increase "spare" rlm_ldap (ldap): Opening additional connection (5), 1 of 32 pending slots used rlm_ldap (ldap): Connecting to ldap://rad.domain.com:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Reserved connection (5) (6) EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}}) (6) --> (uid=test-a) (6) Performing search in "cn=users,dc=domain,dc=de" with filter "(uid=test-a)", scope "sub" (6) Waiting for search result... (6) User object found at DN "uid=Test-A,cn=Admins,cn=users,dc=domain,dc=de" (6) Checking user object's gidNumber attributes (6) Performing unfiltered search in "uid=Test-A,cn=Admins,cn=users,dc=domain,dc=de", scope "base" (6) Waiting for search result... (6) Processing gidNumber value "admins" as a group name rlm_ldap (ldap): Released connection (5) rlm_ldap (ldap): Need 2 more connections to reach 10 spares rlm_ldap (ldap): Opening additional connection (6), 1 of 31 pending slots used rlm_ldap (ldap): Connecting to ldap://rad.domain.com:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful (6) User is not a member of "616" (6) if ((&LDAP-Group == "616") && (Packet-Src-IP-Address != 172.17.26.160)) -> FALSE (6) [chap] = noop (6) [mschap] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "test-a", looking up realm NULL (6) suffix: No such realm "NULL" (6) [suffix] = noop (6) update control { (6) &Proxy-To-Realm := LOCAL (6) } # update control = noop (6) eap: Peer sent EAP Response (code 2) ID 3 length 11 (6) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (6) [eap] = ok (6) } # authorize = ok (6) Found Auth-Type = eap (6) # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel (6) authenticate { (6) eap: Peer sent packet with method EAP Identity (1) (6) eap: Calling submodule eap_mschapv2 to process data (6) eap_mschapv2: Issuing Challenge (6) eap: Sending EAP Request (code 1) ID 4 length 43 (6) eap: EAP session adding &reply:State = 0x762e1ad9762a0093 (6) [eap] = handled (6) } # authenticate = handled (6) } # server inner-tunnel (6) Virtual server sending reply (6) EAP-Message = 0x0104002b1a0104002610b2a919c34a7095e9ef681ecc9a36595d667265657261646975732d332e302e3132 (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) State = 0x762e1ad9762a0093ae5cb8ff36bceb39 (6) eap_peap: Got tunneled reply code 11 (6) eap_peap: EAP-Message = 0x0104002b1a0104002610b2a919c34a7095e9ef681ecc9a36595d667265657261646975732d332e302e3132 (6) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (6) eap_peap: State = 0x762e1ad9762a0093ae5cb8ff36bceb39 (6) eap_peap: Got tunneled reply RADIUS code 11 (6) eap_peap: EAP-Message = 0x0104002b1a0104002610b2a919c34a7095e9ef681ecc9a36595d667265657261646975732d332e302e3132 (6) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (6) eap_peap: State = 0x762e1ad9762a0093ae5cb8ff36bceb39 (6) eap_peap: Got tunneled Access-Challenge (6) eap: Sending EAP Request (code 1) ID 4 length 75 (6) eap: EAP session adding &reply:State = 0x9e07ab319803b214 (6) [eap] = handled (6) } # authenticate = handled (6) Using Post-Auth-Type Challenge (6) Post-Auth-Type sub-section not found. Ignoring. (6) # Executing group from file /etc/freeradius/sites-enabled/default (6) Sent Access-Challenge Id 178 from 172.17.27.78:1812 to 172.17.26.160:43297 length 0 (6) EAP-Message = 0x0104004b19001703010040894f3af8d03bacd177be628df80bdd454933fa0b923535c57c57d1ae9989b27bddf790aee37be4e0946a99ed871628fbc365a11af144a0c19d9a6e58ceeda6ac (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) State = 0x9e07ab319803b2147db0651e6ba99830 (6) Finished request Waking up in 4.6 seconds. (7) Received Access-Request Id 179 from 172.17.26.160:43297 to 172.17.27.78:1812 length 278 (7) User-Name = "test-a" (7) NAS-Identifier = "44d9e7f96309" (7) NAS-Port = 0 (7) Called-Station-Id = "44-D9-E7-FA-63-09:test-rad-a1" (7) Calling-Station-Id = "60-A3-7D-2C-A2-19" (7) Framed-MTU = 1400 (7) NAS-Port-Type = Wireless-802.11 (7) Connect-Info = "CONNECT 0Mbps 802.11b" (7) EAP-Message = 0x0204006b190017030100602d4c3e90ccb7e84329224cc04420eb55b46a9250b234b9cd6e2f469abba35b31a8a06f5549dd9e04e0d1682bcd9a1d6f77b51f9ba7931bd678d4c1cd212eb73ee67b5ebb59cca09d954cd5cdfc14fefd30dee4bb791aee00d0351cba83a281cd (7) State = 0x9e07ab319803b2147db0651e6ba99830 (7) Message-Authenticator = 0x8f0e0809a4e4935967e7b75f7001fdef (7) session-state: No cached attributes (7) # Executing section authorize from file /etc/freeradius/sites-enabled/default (7) authorize { (7) policy filter_username { (7) if (&User-Name) { (7) if (&User-Name) -> TRUE (7) if (&User-Name) { (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@[^@]*@/ ) { (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /@\./) { (7) if (&User-Name =~ /@\./) -> FALSE (7) } # if (&User-Name) = notfound (7) } # policy filter_username = notfound (7) [preprocess] = ok (7) [chap] = noop (7) [mschap] = noop (7) [digest] = noop (7) suffix: Checking for suffix after "@" (7) suffix: No '@' in User-Name = "test-a", looking up realm NULL (7) suffix: No such realm "NULL" (7) [suffix] = noop (7) eap: Peer sent EAP Response (code 2) ID 4 length 107 (7) eap: Continuing tunnel setup (7) [eap] = ok (7) } # authorize = ok (7) Found Auth-Type = eap (7) # Executing group from file /etc/freeradius/sites-enabled/default (7) authenticate { (7) eap: Expiring EAP session with state 0x762e1ad9762a0093 (7) eap: Finished EAP session with state 0x9e07ab319803b214 (7) eap: Previous EAP request found for state 0x9e07ab319803b214, released from the list (7) eap: Peer sent packet with method EAP PEAP (25) (7) eap: Calling submodule eap_peap to process data (7) eap_peap: Continuing EAP-TLS (7) eap_peap: [eaptls verify] = ok (7) eap_peap: Done initial handshake (7) eap_peap: [eaptls process] = ok (7) eap_peap: Session established. Decoding tunneled attributes (7) eap_peap: PEAP state phase2 (7) eap_peap: EAP method MSCHAPv2 (26) (7) eap_peap: Got tunneled request (7) eap_peap: EAP-Message = 0x020400411a0204003c31e41e98e6ed53c8cd1b2dca96b04da1c800000000000000009a09d5bfff0bb8f9741638c1109c60f9c2d7030068db76ce00746573742d61 (7) eap_peap: Setting User-Name to test-a (7) eap_peap: Sending tunneled request to inner-tunnel (7) eap_peap: EAP-Message = 0x020400411a0204003c31e41e98e6ed53c8cd1b2dca96b04da1c800000000000000009a09d5bfff0bb8f9741638c1109c60f9c2d7030068db76ce00746573742d61 (7) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (7) eap_peap: User-Name = "test-a" (7) eap_peap: State = 0x762e1ad9762a0093ae5cb8ff36bceb39 (7) Virtual server inner-tunnel received request (7) EAP-Message = 0x020400411a0204003c31e41e98e6ed53c8cd1b2dca96b04da1c800000000000000009a09d5bfff0bb8f9741638c1109c60f9c2d7030068db76ce00746573742d61 (7) FreeRADIUS-Proxied-To = 127.0.0.1 (7) User-Name = "test-a" (7) State = 0x762e1ad9762a0093ae5cb8ff36bceb39 (7) WARNING: Outer and inner identities are the same. User privacy is compromised. (7) server inner-tunnel { (7) session-state: No cached attributes (7) # Executing section authorize from file /etc/freeradius/sites-enabled/inner-tunnel (7) authorize { (7) policy filter_username { (7) if (&User-Name) { (7) if (&User-Name) -> TRUE (7) if (&User-Name) { (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@[^@]*@/ ) { (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /@\./) { (7) if (&User-Name =~ /@\./) -> FALSE (7) } # if (&User-Name) = notfound (7) } # policy filter_username = notfound (7) if ((&LDAP-Group == "616") && (Packet-Src-IP-Address != 172.17.26.160)) { (7) Searching for user in group "616" rlm_ldap (ldap): Reserved connection (5) (7) EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}}) (7) --> (uid=test-a) (7) Performing search in "cn=users,dc=domain,dc=de" with filter "(uid=test-a)", scope "sub" (7) Waiting for search result... (7) User object found at DN "uid=Test-A,cn=Admins,cn=users,dc=domain,dc=de" (7) Checking user object's gidNumber attributes (7) Performing unfiltered search in "uid=Test-A,cn=Admins,cn=users,dc=domain,dc=de", scope "base" (7) Waiting for search result... (7) Processing gidNumber value "admins" as a group name rlm_ldap (ldap): Released connection (5) (7) User is not a member of "616" (7) if ((&LDAP-Group == "616") && (Packet-Src-IP-Address != 172.17.26.160)) -> FALSE (7) [chap] = noop (7) [mschap] = noop (7) suffix: Checking for suffix after "@" (7) suffix: No '@' in User-Name = "test-a", looking up realm NULL (7) suffix: No such realm "NULL" (7) [suffix] = noop (7) update control { (7) &Proxy-To-Realm := LOCAL (7) } # update control = noop (7) eap: Peer sent EAP Response (code 2) ID 4 length 65 (7) eap: No EAP Start, assuming it's an on-going EAP conversation (7) [eap] = updated (7) [files] = noop rlm_ldap (ldap): Reserved connection (6) (7) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}}) (7) ldap: --> (uid=test-a) (7) ldap: Performing search in "cn=users,dc=domain,dc=de" with filter "(uid=test-a)", scope "sub" (7) ldap: Waiting for search result... (7) ldap: User object found at DN "uid=Test-A,cn=Admins,cn=users,dc=domain,dc=de" (7) ldap: Processing user attributes (7) ldap: control:Password-With-Header += 'passwd' (7) ldap: reply:Tunnel-Type := VLAN (7) ldap: reply:Tunnel-Medium-Type := IEEE-802 rlm_ldap (ldap): Released connection (6) (7) [ldap] = updated (7) [expiration] = noop (7) [logintime] = noop (7) pap: No {...} in Password-With-Header, re-writing to Cleartext-Password (7) pap: Removing &control:Password-With-Header (7) pap: WARNING: Auth-Type already set. Not setting to PAP (7) [pap] = noop (7) } # authorize = updated (7) Found Auth-Type = eap (7) # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel (7) authenticate { (7) eap: Expiring EAP session with state 0x762e1ad9762a0093 (7) eap: Finished EAP session with state 0x762e1ad9762a0093 (7) eap: Previous EAP request found for state 0x762e1ad9762a0093, released from the list (7) eap: Peer sent packet with method EAP MSCHAPv2 (26) (7) eap: Calling submodule eap_mschapv2 to process data (7) eap_mschapv2: # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel (7) eap_mschapv2: authenticate { (7) mschap: Found Cleartext-Password, hashing to create NT-Password (7) mschap: Found Cleartext-Password, hashing to create LM-Password (7) mschap: Creating challenge hash with username: test-a (7) mschap: Client is using MS-CHAPv2 (7) mschap: Adding MS-CHAPv2 MPPE keys (7) [mschap] = ok (7) } # authenticate = ok (7) MSCHAP Success (7) eap: Sending EAP Request (code 1) ID 5 length 51 (7) eap: EAP session adding &reply:State = 0x762e1ad9772b0093 (7) [eap] = handled (7) } # authenticate = handled (7) } # server inner-tunnel (7) Virtual server sending reply (7) Tunnel-Type := VLAN (7) Tunnel-Medium-Type := IEEE-802 (7) EAP-Message = 0x010500331a0304002e533d41303335384346363634313841413935453142384537353232393930393135344343353230383731 (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) State = 0x762e1ad9772b0093ae5cb8ff36bceb39 (7) eap_peap: Got tunneled reply code 11 (7) eap_peap: Tunnel-Type := VLAN (7) eap_peap: Tunnel-Medium-Type := IEEE-802 (7) eap_peap: EAP-Message = 0x010500331a0304002e533d41303335384346363634313841413935453142384537353232393930393135344343353230383731 (7) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (7) eap_peap: State = 0x762e1ad9772b0093ae5cb8ff36bceb39 (7) eap_peap: Got tunneled reply RADIUS code 11 (7) eap_peap: Tunnel-Type := VLAN (7) eap_peap: Tunnel-Medium-Type := IEEE-802 (7) eap_peap: EAP-Message = 0x010500331a0304002e533d41303335384346363634313841413935453142384537353232393930393135344343353230383731 (7) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (7) eap_peap: State = 0x762e1ad9772b0093ae5cb8ff36bceb39 (7) eap_peap: Got tunneled Access-Challenge (7) eap: Sending EAP Request (code 1) ID 5 length 91 (7) eap: EAP session adding &reply:State = 0x9e07ab319902b214 (7) [eap] = handled (7) } # authenticate = handled (7) Using Post-Auth-Type Challenge (7) Post-Auth-Type sub-section not found. Ignoring. (7) # Executing group from file /etc/freeradius/sites-enabled/default (7) Sent Access-Challenge Id 179 from 172.17.27.78:1812 to 172.17.26.160:43297 length 0 (7) EAP-Message = 0x0105005b19001703010050505b7fe2ff5d8e3b8d66e2cfedfd47348f574952ef522b8df5e606dac261e49adf73b071906a4b49c6bdbd34f55bdb91f678b43cd2c7210778190899d38e7963037a94bdd306a4a7cb6f89281afcfd9e (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) State = 0x9e07ab319902b2147db0651e6ba99830 (7) Finished request Waking up in 4.5 seconds. (8) Received Access-Request Id 180 from 172.17.26.160:43297 to 172.17.27.78:1812 length 214 (8) User-Name = "test-a" (8) NAS-Identifier = "44d9e7f96309" (8) NAS-Port = 0 (8) Called-Station-Id = "44-D9-E7-FA-63-09:test-rad-a1" (8) Calling-Station-Id = "60-A3-7D-2C-A2-19" (8) Framed-MTU = 1400 (8) NAS-Port-Type = Wireless-802.11 (8) Connect-Info = "CONNECT 0Mbps 802.11b" (8) EAP-Message = 0x0205002b190017030100201d239c709600f904a8a007daa0913a346f637b5f0897d83e3e63c0d56b79ea7e (8) State = 0x9e07ab319902b2147db0651e6ba99830 (8) Message-Authenticator = 0x493ad04a8467c7ff2af23accafd9f4f4 (8) session-state: No cached attributes (8) # Executing section authorize from file /etc/freeradius/sites-enabled/default (8) authorize { (8) policy filter_username { (8) if (&User-Name) { (8) if (&User-Name) -> TRUE (8) if (&User-Name) { (8) if (&User-Name =~ / /) { (8) if (&User-Name =~ / /) -> FALSE (8) if (&User-Name =~ /@[^@]*@/ ) { (8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (8) if (&User-Name =~ /\.\./ ) { (8) if (&User-Name =~ /\.\./ ) -> FALSE (8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (8) if (&User-Name =~ /\.$/) { (8) if (&User-Name =~ /\.$/) -> FALSE (8) if (&User-Name =~ /@\./) { (8) if (&User-Name =~ /@\./) -> FALSE (8) } # if (&User-Name) = notfound (8) } # policy filter_username = notfound (8) [preprocess] = ok (8) [chap] = noop (8) [mschap] = noop (8) [digest] = noop (8) suffix: Checking for suffix after "@" (8) suffix: No '@' in User-Name = "test-a", looking up realm NULL (8) suffix: No such realm "NULL" (8) [suffix] = noop (8) eap: Peer sent EAP Response (code 2) ID 5 length 43 (8) eap: Continuing tunnel setup (8) [eap] = ok (8) } # authorize = ok (8) Found Auth-Type = eap (8) # Executing group from file /etc/freeradius/sites-enabled/default (8) authenticate { (8) eap: Expiring EAP session with state 0x762e1ad9772b0093 (8) eap: Finished EAP session with state 0x9e07ab319902b214 (8) eap: Previous EAP request found for state 0x9e07ab319902b214, released from the list (8) eap: Peer sent packet with method EAP PEAP (25) (8) eap: Calling submodule eap_peap to process data (8) eap_peap: Continuing EAP-TLS (8) eap_peap: [eaptls verify] = ok (8) eap_peap: Done initial handshake (8) eap_peap: [eaptls process] = ok (8) eap_peap: Session established. Decoding tunneled attributes (8) eap_peap: PEAP state phase2 (8) eap_peap: EAP method MSCHAPv2 (26) (8) eap_peap: Got tunneled request (8) eap_peap: EAP-Message = 0x020500061a03 (8) eap_peap: Setting User-Name to test-a (8) eap_peap: Sending tunneled request to inner-tunnel (8) eap_peap: EAP-Message = 0x020500061a03 (8) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (8) eap_peap: User-Name = "test-a" (8) eap_peap: State = 0x762e1ad9772b0093ae5cb8ff36bceb39 (8) Virtual server inner-tunnel received request (8) EAP-Message = 0x020500061a03 (8) FreeRADIUS-Proxied-To = 127.0.0.1 (8) User-Name = "test-a" (8) State = 0x762e1ad9772b0093ae5cb8ff36bceb39 (8) WARNING: Outer and inner identities are the same. User privacy is compromised. (8) server inner-tunnel { (8) session-state: No cached attributes (8) # Executing section authorize from file /etc/freeradius/sites-enabled/inner-tunnel (8) authorize { (8) policy filter_username { (8) if (&User-Name) { (8) if (&User-Name) -> TRUE (8) if (&User-Name) { (8) if (&User-Name =~ / /) { (8) if (&User-Name =~ / /) -> FALSE (8) if (&User-Name =~ /@[^@]*@/ ) { (8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (8) if (&User-Name =~ /\.\./ ) { (8) if (&User-Name =~ /\.\./ ) -> FALSE (8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (8) if (&User-Name =~ /\.$/) { (8) if (&User-Name =~ /\.$/) -> FALSE (8) if (&User-Name =~ /@\./) { (8) if (&User-Name =~ /@\./) -> FALSE (8) } # if (&User-Name) = notfound (8) } # policy filter_username = notfound (8) if ((&LDAP-Group == "616") && (Packet-Src-IP-Address != 172.17.26.160)) { (8) Searching for user in group "616" rlm_ldap (ldap): Reserved connection (5) (8) EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}}) (8) --> (uid=test-a) (8) Performing search in "cn=users,dc=domain,dc=de" with filter "(uid=test-a)", scope "sub" (8) Waiting for search result... (8) User object found at DN "uid=Test-A,cn=Admins,cn=users,dc=domain,dc=de" (8) Checking user object's gidNumber attributes (8) Performing unfiltered search in "uid=Test-A,cn=Admins,cn=users,dc=domain,dc=de", scope "base" (8) Waiting for search result... (8) Processing gidNumber value "admins" as a group name rlm_ldap (ldap): Released connection (5) (8) User is not a member of "616" (8) if ((&LDAP-Group == "616") && (Packet-Src-IP-Address != 172.17.26.160)) -> FALSE (8) [chap] = noop (8) [mschap] = noop (8) suffix: Checking for suffix after "@" (8) suffix: No '@' in User-Name = "test-a", looking up realm NULL (8) suffix: No such realm "NULL" (8) [suffix] = noop (8) update control { (8) &Proxy-To-Realm := LOCAL (8) } # update control = noop (8) eap: Peer sent EAP Response (code 2) ID 5 length 6 (8) eap: No EAP Start, assuming it's an on-going EAP conversation (8) [eap] = updated (8) [files] = noop rlm_ldap (ldap): Reserved connection (6) (8) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}}) (8) ldap: --> (uid=test-a) (8) ldap: Performing search in "cn=users,dc=domain,dc=de" with filter "(uid=test-a)", scope "sub" (8) ldap: Waiting for search result... (8) ldap: User object found at DN "uid=Test-A,cn=Admins,cn=users,dc=domain,dc=de" (8) ldap: Processing user attributes (8) ldap: control:Password-With-Header += 'passwd' (8) ldap: reply:Tunnel-Type := VLAN (8) ldap: reply:Tunnel-Medium-Type := IEEE-802 rlm_ldap (ldap): Released connection (6) (8) [ldap] = updated (8) [expiration] = noop (8) [logintime] = noop (8) pap: No {...} in Password-With-Header, re-writing to Cleartext-Password (8) pap: Removing &control:Password-With-Header (8) pap: WARNING: Auth-Type already set. Not setting to PAP (8) [pap] = noop (8) } # authorize = updated (8) Found Auth-Type = eap (8) # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel (8) authenticate { (8) eap: Expiring EAP session with state 0x762e1ad9772b0093 (8) eap: Finished EAP session with state 0x762e1ad9772b0093 (8) eap: Previous EAP request found for state 0x762e1ad9772b0093, released from the list (8) eap: Peer sent packet with method EAP MSCHAPv2 (26) (8) eap: Calling submodule eap_mschapv2 to process data (8) eap: Sending EAP Success (code 3) ID 5 length 4 (8) eap: Freeing handler (8) [eap] = ok (8) } # authenticate = ok (8) # Executing section post-auth from file /etc/freeradius/sites-enabled/inner-tunnel (8) post-auth { (8) if (&LDAP-Group == "admins") { (8) Searching for user in group "admins" rlm_ldap (ldap): Reserved connection (5) (8) Using user DN from request "uid=Test-A,cn=Admins,cn=users,dc=domain,dc=de" (8) Checking user object's gidNumber attributes (8) Performing unfiltered search in "uid=Test-A,cn=Admins,cn=users,dc=domain,dc=de", scope "base" (8) Waiting for search result... (8) Processing gidNumber value "admins" as a group name (8) User found in group "admins". Comparison between membership: name, check: name rlm_ldap (ldap): Released connection (5) (8) if (&LDAP-Group == "admins") -> TRUE (8) if (&LDAP-Group == "admins") { (8) update { (8) &outer.session-state:Tunnel-Type := VLAN (8) &outer.session-state:Tunnel-Medium-Type := IEEE-802 (8) &outer.session-state:Tunnel-Private-Group-Id := "10" (8) &outer.session-state:User-Name := User-Name[*] -> 'test-a' (8) } # update = noop (8) } # if (&LDAP-Group == "admins") = noop (8) ... skipping elsif: Preceding "if" was taken (8) update { (8) No attributes updated (8) No attributes updated (8) No attributes updated (8) &outer.session-state:User-Name := User-Name[*] -> 'test-a' (8) } # update = noop (8) } # post-auth = noop (8) } # server inner-tunnel (8) Virtual server sending reply (8) Tunnel-Type := VLAN (8) Tunnel-Medium-Type := IEEE-802 (8) MS-MPPE-Encryption-Policy = Encryption-Allowed (8) MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed (8) MS-MPPE-Send-Key = 0x148f248ff006938f098805d60b5eaa48 (8) MS-MPPE-Recv-Key = 0x3609377d8cc73d2824d0e370e3c4b85f (8) EAP-Message = 0x03050004 (8) Message-Authenticator = 0x00000000000000000000000000000000 (8) User-Name = "test-a" (8) eap_peap: Got tunneled reply code 2 (8) eap_peap: Tunnel-Type := VLAN (8) eap_peap: Tunnel-Medium-Type := IEEE-802 (8) eap_peap: MS-MPPE-Encryption-Policy = Encryption-Allowed (8) eap_peap: MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed (8) eap_peap: MS-MPPE-Send-Key = 0x148f248ff006938f098805d60b5eaa48 (8) eap_peap: MS-MPPE-Recv-Key = 0x3609377d8cc73d2824d0e370e3c4b85f (8) eap_peap: EAP-Message = 0x03050004 (8) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (8) eap_peap: User-Name = "test-a" (8) eap_peap: Got tunneled reply RADIUS code 2 (8) eap_peap: Tunnel-Type := VLAN (8) eap_peap: Tunnel-Medium-Type := IEEE-802 (8) eap_peap: MS-MPPE-Encryption-Policy = Encryption-Allowed (8) eap_peap: MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed (8) eap_peap: MS-MPPE-Send-Key = 0x148f248ff006938f098805d60b5eaa48 (8) eap_peap: MS-MPPE-Recv-Key = 0x3609377d8cc73d2824d0e370e3c4b85f (8) eap_peap: EAP-Message = 0x03050004 (8) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (8) eap_peap: User-Name = "test-a" (8) eap_peap: Tunneled authentication was successful (8) eap_peap: SUCCESS (8) eap: Sending EAP Request (code 1) ID 6 length 43 (8) eap: EAP session adding &reply:State = 0x9e07ab319601b214 (8) [eap] = handled (8) } # authenticate = handled (8) Using Post-Auth-Type Challenge (8) Post-Auth-Type sub-section not found. Ignoring. (8) # Executing group from file /etc/freeradius/sites-enabled/default (8) session-state: Saving cached attributes (8) Tunnel-Type := VLAN (8) Tunnel-Medium-Type := IEEE-802 (8) Tunnel-Private-Group-Id := "10" (8) User-Name := "test-a" (8) Sent Access-Challenge Id 180 from 172.17.27.78:1812 to 172.17.26.160:43297 length 0 (8) EAP-Message = 0x0106002b19001703010020d8ba2aae2a1ab16b8c9d00b8a74443688cd4ce135bfc081974dd0237b3ce5cc4 (8) Message-Authenticator = 0x00000000000000000000000000000000 (8) State = 0x9e07ab319601b2147db0651e6ba99830 (8) Finished request Waking up in 4.4 seconds. (9) Received Access-Request Id 181 from 172.17.26.160:43297 to 172.17.27.78:1812 length 214 (9) User-Name = "test-a" (9) NAS-Identifier = "44d9e7f96309" (9) NAS-Port = 0 (9) Called-Station-Id = "44-D9-E7-FA-63-09:test-rad-a1" (9) Calling-Station-Id = "60-A3-7D-2C-A2-19" (9) Framed-MTU = 1400 (9) NAS-Port-Type = Wireless-802.11 (9) Connect-Info = "CONNECT 0Mbps 802.11b" (9) EAP-Message = 0x0206002b1900170301002030062f654aaee5093e0df236f375b81c9f2f906d8e8733c40d46fd6d2113219d (9) State = 0x9e07ab319601b2147db0651e6ba99830 (9) Message-Authenticator = 0x8d180b2adacb28cf9294b573d3968248 (9) Restoring &session-state (9) &session-state:Tunnel-Type := VLAN (9) &session-state:Tunnel-Medium-Type := IEEE-802 (9) &session-state:Tunnel-Private-Group-Id := "10" (9) &session-state:User-Name := "test-a" (9) # Executing section authorize from file /etc/freeradius/sites-enabled/default (9) authorize { (9) policy filter_username { (9) if (&User-Name) { (9) if (&User-Name) -> TRUE (9) if (&User-Name) { (9) if (&User-Name =~ / /) { (9) if (&User-Name =~ / /) -> FALSE (9) if (&User-Name =~ /@[^@]*@/ ) { (9) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (9) if (&User-Name =~ /\.\./ ) { (9) if (&User-Name =~ /\.\./ ) -> FALSE (9) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (9) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (9) if (&User-Name =~ /\.$/) { (9) if (&User-Name =~ /\.$/) -> FALSE (9) if (&User-Name =~ /@\./) { (9) if (&User-Name =~ /@\./) -> FALSE (9) } # if (&User-Name) = notfound (9) } # policy filter_username = notfound (9) [preprocess] = ok (9) [chap] = noop (9) [mschap] = noop (9) [digest] = noop (9) suffix: Checking for suffix after "@" (9) suffix: No '@' in User-Name = "test-a", looking up realm NULL (9) suffix: No such realm "NULL" (9) [suffix] = noop (9) eap: Peer sent EAP Response (code 2) ID 6 length 43 (9) eap: Continuing tunnel setup (9) [eap] = ok (9) } # authorize = ok (9) Found Auth-Type = eap (9) # Executing group from file /etc/freeradius/sites-enabled/default (9) authenticate { (9) eap: Expiring EAP session with state 0x9e07ab319601b214 (9) eap: Finished EAP session with state 0x9e07ab319601b214 (9) eap: Previous EAP request found for state 0x9e07ab319601b214, released from the list (9) eap: Peer sent packet with method EAP PEAP (25) (9) eap: Calling submodule eap_peap to process data (9) eap_peap: Continuing EAP-TLS (9) eap_peap: [eaptls verify] = ok (9) eap_peap: Done initial handshake (9) eap_peap: [eaptls process] = ok (9) eap_peap: Session established. Decoding tunneled attributes (9) eap_peap: PEAP state send tlv success (9) eap_peap: Received EAP-TLV response (9) eap_peap: Success (9) eap_peap: No information to cache: session caching will be disabled for session 46f9d2817aaeb9ce63792258fec8297b8df858ae69e871e406934c04f0bb5293 (9) eap: Sending EAP Success (code 3) ID 6 length 4 (9) eap: Freeing handler (9) [eap] = ok (9) } # authenticate = ok (9) # Executing section post-auth from file /etc/freeradius/sites-enabled/default (9) post-auth { (9) update { (9) &reply::Tunnel-Type += &session-state:Tunnel-Type[*] -> VLAN (9) &reply::Tunnel-Medium-Type += &session-state:Tunnel-Medium-Type[*] -> IEEE-802 (9) &reply::Tunnel-Private-Group-Id += &session-state:Tunnel-Private-Group-Id[*] -> '10' (9) &reply::User-Name += &session-state:User-Name[*] -> 'test-a' (9) } # update = noop (9) [exec] = noop (9) policy remove_reply_message_if_eap { (9) if (&reply:EAP-Message && &reply:Reply-Message) { (9) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (9) else { (9) [noop] = noop (9) } # else = noop (9) } # policy remove_reply_message_if_eap = noop (9) } # post-auth = noop (9) Sent Access-Accept Id 181 from 172.17.27.78:1812 to 172.17.26.160:43297 length 0 (9) MS-MPPE-Recv-Key = 0x67b8193ef1743a40baf927ad9c8e8e51015ff006a15d65ab2bb16de2cb5cfc05 (9) MS-MPPE-Send-Key = 0x20fef0c28e2ac5390ee5ab1f0143ae7c634ad3004970710794513e60b83552bf (9) EAP-Message = 0x03060004 (9) Message-Authenticator = 0x00000000000000000000000000000000 (9) User-Name = "test-a" (9) Tunnel-Type += VLAN (9) Tunnel-Medium-Type += IEEE-802 (9) Tunnel-Private-Group-Id += "10" (9) User-Name += "test-a" (9) Finished request Thanks Moritz