Radius eap- tls certificate failure

30 Jan 2019

      Dear Alan, you are wright, my apologies, I have read the guide 😊

What I am trying to do is make EAP-TLS certificates work with an closed (LAN) camera network with own made CA, server and client certificates. I made the certificates as follow.
openssl genrsa -out rootCA.key 2048
openssl req -x509 -new -nodes -key rootCA_V1.0.key -sha256 -days 1024 -out rootCA_V1.0.pem

Country Name (2 letter code) [AU]:NL
State or Province Name (full name) [Some-State]:.
Locality Name (eg, city) []:.
Organization Name (eg, company) [Internet Widgits Pty Ltd]:.
Organizational Unit Name (eg, section) []:.
Common Name (eg, YOUR name) []:CA
Email Address []:.

Then I made an server certificate as follow.

openssl genrsa -out SRV_V1.0.key 2048
openssl req -new -key SRV_V1.0.key -out SRV_V1.0.csr
Country Name (2 letter code) [AU]:NL
State or Province Name (full name) [Some-State]:.
Locality Name (eg, city) []:.
Organization Name (eg, company) [Internet Widgits Pty Ltd]:.
Organizational Unit Name (eg, section) []:.
Common Name (eg, YOUR name) []:SERVER
Email Address []:.

openssl x509 -req -in SRV_V1.0.csr -CA rootCA_V1.0.pem -CAkey rootCA_V1.0.key -CAcreateserial -out SRV_V1.0.crt -days 500 -sha256

Then I made an client certificate as follow.
In the camera (Bosch) I have to create an CSR where I have to enter the same questions and answers as above except the CN, I entered Cam4
Then I copied the file in an txt file and changed the format to .csr
openssl x509 -req -in cam4.csr -CA rootCA_V1.0.pem -CAkey rootCA)V1.0.key -CAcreateserial -out cam4.crt -days 500 -sha256

dropped the CA and client certificates in the camera where I chose the CA as EAP-TLS and the client as EAP-TLS client.  In the specs from the camera I found the next info:
the camera supports 802.1x network verification with EAP/TLS and TLS 1.2 including encryption AES 256.
Then I dropped the CA and server certificates in the certs map in "/etc/freeradius/3.0/certs/
I made an test with multiple camera’s but only one works, I used al the same camera’s so my guess is that there is one camera defect I my benefit because the other four camera’s are not working, by all the other camera’s I get the error that’s in the debug below.

FreeRADIUS Version 3.0.16

Copyright (C) 1999-2017 The FreeRADIUS server project and contributors

There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A

PARTICULAR PURPOSE

You may redistribute copies of FreeRADIUS under the terms of the

GNU General Public License

For more information about these matters, see the file named COPYRIGHT

Starting - reading configuration files ...

including dictionary file /usr/share/freeradius/dictionary

including dictionary file /usr/share/freeradius/dictionary.dhcp

including dictionary file /usr/share/freeradius/dictionary.vqp

including dictionary file /etc/freeradius/3.0/dictionary

including configuration file /etc/freeradius/3.0/radiusd.conf

including configuration file /etc/freeradius/3.0/proxy.conf

including configuration file /etc/freeradius/3.0/clients.conf

including files in directory /etc/freeradius/3.0/mods-enabled/

including configuration file /etc/freeradius/3.0/mods-enabled/expiration

including configuration file /etc/freeradius/3.0/mods-enabled/chap

including configuration file /etc/freeradius/3.0/mods-enabled/mschap

including configuration file /etc/freeradius/3.0/mods-enabled/linelog

including configuration file /etc/freeradius/3.0/mods-enabled/digest

including configuration file /etc/freeradius/3.0/mods-enabled/soh

including configuration file /etc/freeradius/3.0/mods-enabled/files

including configuration file /etc/freeradius/3.0/mods-enabled/detail.log

including configuration file /etc/freeradius/3.0/mods-enabled/radutmp

including configuration file /etc/freeradius/3.0/mods-enabled/preprocess

including configuration file /etc/freeradius/3.0/mods-enabled/echo

including configuration file /etc/freeradius/3.0/mods-enabled/realm

including configuration file /etc/freeradius/3.0/mods-enabled/always

including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp

including configuration file /etc/freeradius/3.0/mods-enabled/logintime

including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap

including configuration file /etc/freeradius/3.0/mods-enabled/pap

including configuration file /etc/freeradius/3.0/mods-enabled/utf8

including configuration file /etc/freeradius/3.0/mods-enabled/exec

including configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clients

including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter

including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth

including configuration file /etc/freeradius/3.0/mods-enabled/passwd

including configuration file /etc/freeradius/3.0/mods-enabled/unpack

including configuration file /etc/freeradius/3.0/mods-enabled/replicate

including configuration file /etc/freeradius/3.0/mods-enabled/unix

including configuration file /etc/freeradius/3.0/mods-enabled/expr

including configuration file /etc/freeradius/3.0/mods-enabled/detail

including configuration file /etc/freeradius/3.0/mods-enabled/eap

including files in directory /etc/freeradius/3.0/policy.d/

including configuration file /etc/freeradius/3.0/policy.d/control

including configuration file /etc/freeradius/3.0/policy.d/abfab-tr

including configuration file /etc/freeradius/3.0/policy.d/filter

including configuration file /etc/freeradius/3.0/policy.d/canonicalization

including configuration file /etc/freeradius/3.0/policy.d/debug

including configuration file /etc/freeradius/3.0/policy.d/cui

including configuration file /etc/freeradius/3.0/policy.d/moonshot-targeted-ids

including configuration file /etc/freeradius/3.0/policy.d/accounting

including configuration file /etc/freeradius/3.0/policy.d/operator-name

including configuration file /etc/freeradius/3.0/policy.d/dhcp

including configuration file /etc/freeradius/3.0/policy.d/eap

including files in directory /etc/freeradius/3.0/sites-enabled/

including configuration file /etc/freeradius/3.0/sites-enabled/default

including configuration file /etc/freeradius/3.0/sites-enabled/inner-tunnel

main {

security {

           user = "freerad"

           group = "freerad"

           allow_core_dumps = no

}

            name = "freeradius"

            prefix = "/usr"

            localstatedir = "/var"

            logdir = "/var/log/freeradius"

            run_dir = "/var/run/freeradius"

}

main {

            name = "freeradius"

            prefix = "/usr"

            localstatedir = "/var"

            sbindir = "/usr/sbin"

            logdir = "/var/log/freeradius"

            run_dir = "/var/run/freeradius"

            libdir = "/usr/lib/freeradius"

            radacctdir = "/var/log/freeradius/radacct"

            hostname_lookups = no

            max_request_time = 30

            cleanup_delay = 5

            max_requests = 16384

            pidfile = "/var/run/freeradius/freeradius.pid"

            checkrad = "/usr/sbin/checkrad"

            debug_level = 0

            proxy_requests = yes

log {

           stripped_names = no

           auth = no

           auth_badpass = no

           auth_goodpass = no

           colourise = yes

           msg_denied = "You are already logged in - access denied"

}

resources {

}

security {

           max_attributes = 200

           reject_delay = 1.000000

           status_server = yes

}

}

radiusd: #### Loading Realms and Home Servers ####

proxy server {

           retry_delay = 5

           retry_count = 3

           default_fallback = no

           dead_time = 120

           wake_all_if_all_dead = no

}

home_server localhost {

           ipaddr = 127.0.0.1

           port = 1812

           type = "auth"

           secret = <<< secret >>>

           response_window = 20.000000

           response_timeouts = 1

           max_outstanding = 65536

           zombie_period = 40

           status_check = "status-server"

           ping_interval = 30

           check_interval = 30

           check_timeout = 4

           num_answers_to_alive = 3

           revive_interval = 120

  limit {

            max_connections = 16

            max_requests = 0

            lifetime = 0

            idle_timeout = 0

  }

  coa {

            irt = 2

            mrt = 16

            mrc = 5

            mrd = 30

  }

}

home_server_pool my_auth_failover {

            type = fail-over

            home_server = localhost

}

realm example.com {

            auth_pool = my_auth_failover

}

realm LOCAL {

}

radiusd: #### Loading Clients ####

client localhost {

           ipaddr = 127.0.0.1

           require_message_authenticator = no

           secret = <<< secret >>>

           nas_type = "other"

           proto = "*"

  limit {

           max_connections = 16

            lifetime = 0

            idle_timeout = 30

  }

}

client localhost_ipv6 {

           ipv6addr = ::1

           require_message_authenticator = no

           secret = <<< secret >>>

  limit {

            max_connections = 16

            lifetime = 0

            idle_timeout = 30

  }

}

client private-network-1 {

           ipaddr = 192.168.0.239

           require_message_authenticator = no

           secret = <<< secret >>>

  limit {

            max_connections = 16

            lifetime = 0

            idle_timeout = 30

  }

}

Debugger not attached

# Creating Auth-Type = mschap

# Creating Auth-Type = digest

# Creating Auth-Type = eap

# Creating Auth-Type = PAP

# Creating Auth-Type = CHAP

# Creating Auth-Type = MS-CHAP

radiusd: #### Instantiating modules ####

modules {

  # Loaded module rlm_expiration

  # Loading module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration

  # Loaded module rlm_chap

  # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap

  # Loaded module rlm_mschap

  # Loading module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap

  mschap {

            use_mppe = yes

            require_encryption = no

            require_strong = no

            with_ntdomain_hack = yes

   passchange {

   }

            allow_retry = yes

            winbind_retry_with_normalised_username = no

  }

  # Loaded module rlm_linelog

  # Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog

  linelog {

            filename = "/var/log/freeradius/linelog"

            escape_filenames = no

            syslog_severity = "info"

            permissions = 384

            format = "This is a log message for %{User-Name}"

            reference = "messages.%{%{reply:Packet-Type}:-default}"

  }

  # Loading module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog

  linelog log_accounting {

            filename = "/var/log/freeradius/linelog-accounting"

            escape_filenames = no

            syslog_severity = "info"

            permissions = 384

            format = ""

            reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"

  }

  # Loaded module rlm_digest

  # Loading module "digest" from file /etc/freeradius/3.0/mods-enabled/digest

  # Loaded module rlm_soh

  # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh

  soh {

            dhcp = yes

  }

  # Loaded module rlm_files

  # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files

  files {

            filename = "/etc/freeradius/3.0/mods-config/files/authorize"

            acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting"

            preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy"

  }

  # Loaded module rlm_detail

  # Loading module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log

  detail auth_log {

            filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"

            header = "%t"

            permissions = 384

            locking = no

            escape_filenames = no

            log_packet_header = no

  }

  # Loading module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log

  detail reply_log {

            filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"

            header = "%t"

            permissions = 384

            locking = no

            escape_filenames = no

            log_packet_header = no

  }

  # Loading module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log

  detail pre_proxy_log {

            filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"

            header = "%t"

            permissions = 384

            locking = no

            escape_filenames = no

            log_packet_header = no

  }

  # Loading module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log

  detail post_proxy_log {

            filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"

            header = "%t"

            permissions = 384

            locking = no

            escape_filenames = no

            log_packet_header = no

  }

  # Loaded module rlm_radutmp

  # Loading module "radutmp" from file /etc/freeradius/3.0/mods-enabled/radutmp

  radutmp {

            filename = "/var/log/freeradius/radutmp"

            username = "%{User-Name}"

            case_sensitive = yes

            check_with_nas = yes

            permissions = 384

            caller_id = yes

  }

  # Loaded module rlm_preprocess

  # Loading module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess

  preprocess {

            huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups"

            hints = "/etc/freeradius/3.0/mods-config/preprocess/hints"

            with_ascend_hack = no

            ascend_channels_per_line = 23

            with_ntdomain_hack = no

            with_specialix_jetstream_hack = no

            with_cisco_vsa_hack = no

            with_alvarion_vsa_hack = no

  }

  # Loaded module rlm_exec

  # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo

  exec echo {

            wait = yes

            program = "/bin/echo %{User-Name}"

            input_pairs = "request"

            output_pairs = "reply"

            shell_escape = yes

  }

  # Loaded module rlm_realm

  # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm

  realm IPASS {

            format = "prefix"

            delimiter = "/"

            ignore_default = no

            ignore_null = no

  }

  # Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm

  realm suffix {

            format = "suffix"

            delimiter = "@"

            ignore_default = no

            ignore_null = no

  }

  # Loading module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm

  realm realmpercent {

            format = "suffix"

            delimiter = "%"

            ignore_default = no

            ignore_null = no

  }

  # Loading module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm

  realm ntdomain {

            format = "prefix"

            delimiter = "\\"

            ignore_default = no

            ignore_null = no

  }

  # Loaded module rlm_always

  # Loading module "reject" from file /etc/freeradius/3.0/mods-enabled/always

  always reject {

            rcode = "reject"

            simulcount = 0

            mpp = no

  }

  # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always

  always fail {

            rcode = "fail"

            simulcount = 0

            mpp = no

  }

  # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always

  always ok {

            rcode = "ok"

            simulcount = 0

            mpp = no

  }

  # Loading module "handled" from file /etc/freeradius/3.0/mods-enabled/always

  always handled {

            rcode = "handled"

            simulcount = 0

            mpp = no

  }

  # Loading module "invalid" from file /etc/freeradius/3.0/mods-enabled/always

  always invalid {

            rcode = "invalid"

            simulcount = 0

            mpp = no

  }

  # Loading module "userlock" from file /etc/freeradius/3.0/mods-enabled/always

  always userlock {

            rcode = "userlock"

            simulcount = 0

            mpp = no

  }

  # Loading module "notfound" from file /etc/freeradius/3.0/mods-enabled/always

  always notfound {

            rcode = "notfound"

            simulcount = 0

            mpp = no

  }

  # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always

  always noop {

            rcode = "noop"

            simulcount = 0

            mpp = no

  }

  # Loading module "updated" from file /etc/freeradius/3.0/mods-enabled/always

  always updated {

            rcode = "updated"

            simulcount = 0

           mpp = no

  }

  # Loading module "sradutmp" from file /etc/freeradius/3.0/mods-enabled/sradutmp

  radutmp sradutmp {

            filename = "/var/log/freeradius/sradutmp"

            username = "%{User-Name}"

            case_sensitive = yes

            check_with_nas = yes

            permissions = 420

            caller_id = no

  }

  # Loaded module rlm_logintime

  # Loading module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime

  logintime {

            minimum_timeout = 60

  }

  # Loaded module rlm_cache

  # Loading module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap

  cache cache_eap {

            driver = "rlm_cache_rbtree"

            key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"

            ttl = 15

            max_entries = 0

            epoch = 0

            add_stats = no

  }

  # Loaded module rlm_pap

  # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap

  pap {

            normalise = yes

  }

  # Loaded module rlm_utf8

  # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8

  # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec

  exec {

            wait = no

            input_pairs = "request"

            shell_escape = yes

            timeout = 10

  }

  # Loaded module rlm_dynamic_clients

  # Loading module "dynamic_clients" from file /etc/freeradius/3.0/mods-enabled/dynamic_clients

  # Loaded module rlm_attr_filter

  # Loading module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter

  attr_filter attr_filter.post-proxy {

            filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy"

            key = "%{Realm}"

            relaxed = no

  }

  # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter

  attr_filter attr_filter.pre-proxy {

            filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy"

            key = "%{Realm}"

            relaxed = no

  }

  # Loading module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter

  attr_filter attr_filter.access_reject {

            filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject"

            key = "%{User-Name}"

            relaxed = no

  }

  # Loading module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter

  attr_filter attr_filter.access_challenge {

            filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge"

            key = "%{User-Name}"

            relaxed = no

  }

  # Loading module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter

  attr_filter attr_filter.accounting_response {

            filename = "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response"

            key = "%{User-Name}"

            relaxed = no

  }

  # Loading module "ntlm_auth" from file /etc/freeradius/3.0/mods-enabled/ntlm_auth

  exec ntlm_auth {

            wait = yes

            program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}"

            shell_escape = yes

  }

  # Loaded module rlm_passwd

  # Loading module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd

  passwd etc_passwd {

            filename = "/etc/passwd"

            format = "*User-Name:Crypt-Password:"

            delimiter = ":"

            ignore_nislike = no

            ignore_empty = yes

            allow_multiple_keys = no

            hash_size = 100

  }

  # Loaded module rlm_unpack

  # Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack

  # Loaded module rlm_replicate

  # Loading module "replicate" from file /etc/freeradius/3.0/mods-enabled/replicate

  # Loaded module rlm_unix

  # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix

  unix {

            radwtmp = "/var/log/freeradius/radwtmp"

  }

Creating attribute Unix-Group

  # Loaded module rlm_expr

  # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr

  expr {

            safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"

  }

  # Loading module "detail" from file /etc/freeradius/3.0/mods-enabled/detail

  detail {

            filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"

            header = "%t"

            permissions = 384

            locking = no

            escape_filenames = no

            log_packet_header = no

  }

  # Loaded module rlm_eap

  # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap

  eap {

            default_eap_type = "tls"

            timer_expire = 160

            ignore_unknown_eap_types = no

            cisco_accounting_username_bug = no

            max_sessions = 16384

  }

  instantiate {

  }

  # Instantiating module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration

  # Instantiating module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap

rlm_mschap (mschap): using internal authentication

  # Instantiating module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog

  # Instantiating module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog

  # Instantiating module "files" from file /etc/freeradius/3.0/mods-enabled/files

reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize

reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting

reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy

  # Instantiating module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log

rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output

  # Instantiating module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log

  # Instantiating module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log

  # Instantiating module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log

  # Instantiating module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess

reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups

reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints

  # Instantiating module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm

  # Instantiating module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm

  # Instantiating module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm

  # Instantiating module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm

  # Instantiating module "reject" from file /etc/freeradius/3.0/mods-enabled/always

  # Instantiating module "fail" from file /etc/freeradius/3.0/mods-enabled/always

  # Instantiating module "ok" from file /etc/freeradius/3.0/mods-enabled/always

  # Instantiating module "handled" from file /etc/freeradius/3.0/mods-enabled/always

  # Instantiating module "invalid" from file /etc/freeradius/3.0/mods-enabled/always

  # Instantiating module "userlock" from file /etc/freeradius/3.0/mods-enabled/always

  # Instantiating module "notfound" from file /etc/freeradius/3.0/mods-enabled/always

  # Instantiating module "noop" from file /etc/freeradius/3.0/mods-enabled/always

  # Instantiating module "updated" from file /etc/freeradius/3.0/mods-enabled/always

  # Instantiating module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime

  # Instantiating module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap

rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked

  # Instantiating module "pap" from file /etc/freeradius/3.0/mods-enabled/pap

  # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter

reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy

  # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter

reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy

  # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter

reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_reject

[/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay"             found in filter list for realm "DEFAULT".

[/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT".

  # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter

reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_challenge

  # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter

reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/accounting_response

  # Instantiating module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd

rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no

  # Instantiating module "detail" from file /etc/freeradius/3.0/mods-enabled/detail

  # Instantiating module "eap" from file /etc/freeradius/3.0/mods-enabled/eap

   # Linked to sub-module rlm_eap_md5

   # Linked to sub-module rlm_eap_leap

   # Linked to sub-module rlm_eap_gtc

   gtc {

            challenge = "Password: "

            auth_type = "PAP"

   }

   # Linked to sub-module rlm_eap_tls

   tls {

            tls = "tls-common"

   }

   tls-config tls-common {

            verify_depth = 0

            ca_path = "/etc/freeradius/3.0/certs"

            pem_file_type = yes

            private_key_file = "/etc/freeradius/3.0/certs/SRV_V1.0.key"

            certificate_file = "/etc/freeradius/3.0/certs/SRV_V1.0.crt"

            ca_file = "/etc/freeradius/3.0/certs/rootCA_V1.0.pem"

            dh_file = "/etc/freeradius/3.0/certs/dh"

            fragment_size = 1024

            include_length = yes

            auto_chain = yes

            check_crl = no

            check_all_crl = no

            cipher_list = "ALL:!EXPORT:!eNULL:!SSLv2"

            cipher_server_preference = yes

            ecdh_curve = "prime256v1"

            tls_max_version = "1.2"

            tls_min_version = "1.0"

    cache {

            enable = no

            lifetime = 24

            max_entries = 255

    }

    verify {

            skip_if_ocsp_ok = no

    }

    ocsp {

            enable = no

            override_cert_url = yes

            url = "http://127.0.0.1/ocsp/"

            use_nonce = yes

            timeout = 0

            softfail = no

    }

   }

   # Linked to sub-module rlm_eap_ttls

   ttls {

            tls = "tls-common"

            default_eap_type = "tls"

            copy_request_to_tunnel = no

            use_tunneled_reply = no

            virtual_server = "inner-tunnel"

            include_length = yes

            require_client_cert = no

   }

tls: Using cached TLS configuration from previous invocation

   # Linked to sub-module rlm_eap_peap

   peap {

            tls = "tls-common"

            default_eap_type = "tls"

            copy_request_to_tunnel = no

            use_tunneled_reply = no

            proxy_tunneled_request_as_eap = yes

            virtual_server = "inner-tunnel"

            soh = no

            require_client_cert = no

   }

tls: Using cached TLS configuration from previous invocation

   # Linked to sub-module rlm_eap_mschapv2

   mschapv2 {

            with_ntdomain_hack = no

            send_error = no

   }

} # modules

radiusd: #### Loading Virtual Servers ####

server { # from file /etc/freeradius/3.0/radiusd.conf

} # server

server default { # from file /etc/freeradius/3.0/sites-enabled/default

# Loading authenticate {...}

# Loading authorize {...}

Ignoring "sql" (see raddb/mods-available/README.rst)

Ignoring "ldap" (see raddb/mods-available/README.rst)

# Loading preacct {...}

# Loading accounting {...}

# Loading post-proxy {...}

# Loading post-auth {...}

} # server default

server inner-tunnel { # from file /etc/freeradius/3.0/sites-enabled/inner-tunnel

# Loading authenticate {...}

# Loading authorize {...}

# Loading session {...}

# Loading post-proxy {...}

# Loading post-auth {...}

# Skipping contents of 'if' as it is always 'false' -- /etc/freeradius/3.0/sites-enabled/inner-tunnel:331

} # server inner-tunnel

radiusd: #### Opening IP addresses and Ports ####

listen {

            type = "auth"

            ipaddr = *

            port = 0

   limit {

            max_connections = 16

            lifetime = 0

            idle_timeout = 30

   }

}

listen {

            type = "acct"

            ipaddr = *

            port = 0

   limit {

            max_connections = 16

            lifetime = 0

            idle_timeout = 30

   }

}

listen {

            type = "auth"

            ipv6addr = ::

            port = 0

   limit {

            max_connections = 16

            lifetime = 0

            idle_timeout = 30

   }

}

listen {

            type = "acct"

            ipv6addr = ::

            port = 0

   limit {

            max_connections = 16

            lifetime = 0

            idle_timeout = 30

   }

}

listen {

            type = "auth"

            ipaddr = 127.0.0.1

            port = 18120

}

Listening on auth address * port 1812 bound to server default

Listening on acct address * port 1813 bound to server default

Listening on auth address :: port 1812 bound to server default

Listening on acct address :: port 1813 bound to server default

Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel

Listening on proxy address * port 49922

Listening on proxy address :: port 56544

Ready to process requests

(0) Received Access-Request Id 51 from 192.168.0.239:1028 to 192.168.0.222:1812 length 148

(0)   User-Name = "cam5"

(0)   Called-Station-Id = "9c-3d-cf-e3-f6-65"

(0)   Calling-Station-Id = "00-07-5f-a7-9f-13"

(0)   NAS-Identifier = "9c-3d-cf-e3-f6-63"

(0)   NAS-Port = 1

(0)   Framed-MTU = 1500

(0)   NAS-Port-Type = Ethernet

(0)   State = 0xd00877cbd20c7a360a6b89ab4941d679

(0)   EAP-Message = 0x020500090163616d35

(0)   Message-Authenticator = 0x5ce981744bef87aa8e7c2ecd4c87297d

(0) session-state: No cached attributes

(0) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default

(0)   authorize {

(0)     policy filter_username {

(0)       if (&User-Name) {

(0)       if (&User-Name)  -> TRUE

(0)       if (&User-Name)  {

(0)         if (&User-Name =~ / /) {

(0)         if (&User-Name =~ / /)  -> FALSE

(0)         if (&User-Name =~ /@[^@]*@/ ) {

(0)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE

(0)         if (&User-Name =~ /\.\./ ) {

(0)         if (&User-Name =~ /\.\./ )  -> FALSE

(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {

(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE

(0)         if (&User-Name =~ /\.$/)  {

(0)         if (&User-Name =~ /\.$/)   -> FALSE

(0)         if (&User-Name =~ /@\./)  {

(0)         if (&User-Name =~ /@\./)   -> FALSE

(0)       } # if (&User-Name)  = notfound

(0)     } # policy filter_username = notfound

(0)     [preprocess] = ok

(0)     [chap] = noop

(0)     [mschap] = noop

(0)     [digest] = noop

(0) suffix: Checking for suffix after "@"

(0) suffix: No '@' in User-Name = "cam5", looking up realm NULL

(0) suffix: No such realm "NULL"

(0)     [suffix] = noop

(0) eap: Peer sent EAP Response (code 2) ID 5 length 9

(0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize

(0)     [eap] = ok

(0)   } # authorize = ok

(0) Found Auth-Type = eap

(0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default

(0)   authenticate {

(0) eap: Peer sent packet with method EAP Identity (1)

(0) eap: Calling submodule eap_tls to process data

(0) eap_tls: Initiating new EAP-TLS session

(0) eap_tls: Setting verify mode to require certificate from client

(0) eap_tls: [eaptls start] = request

(0) eap: Sending EAP Request (code 1) ID 6 length 6

(0) eap: EAP session adding &reply:State = 0x1b301b2c1b36165c

(0)     [eap] = handled

(0)   } # authenticate = handled

(0) Using Post-Auth-Type Challenge

(0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default

(0)   Challenge { ... } # empty sub-section is ignored

(0) Sent Access-Challenge Id 51 from 192.168.0.222:1812 to 192.168.0.239:1028 length 0

(0)   EAP-Message = 0x010600060d20

(0)   Message-Authenticator = 0x00000000000000000000000000000000

(0)   State = 0x1b301b2c1b36165ca1b3f5c2affdbb31

(0) Finished request

Waking up in 4.9 seconds.

(1) Received Access-Request Id 52 from 192.168.0.239:1028 to 192.168.0.222:1812 length 241

(1)   User-Name = "cam5"

(1)   Called-Station-Id = "9c-3d-cf-e3-f6-65"

(1)   Calling-Station-Id = "00-07-5f-a7-9f-13"

(1)   NAS-Identifier = "9c-3d-cf-e3-f6-63"

(1)   NAS-Port = 1

(1)   Framed-MTU = 1500

(1)   NAS-Port-Type = Ethernet

(1)   State = 0x1b301b2c1b36165ca1b3f5c2affdbb31

(1)   EAP-Message = 0x020600660d800000005c16030300570100005303035b9ce97e5cbff150cf17efe837d59c2f2bd86e090d4dcc9d58364356dd438f7c000012c023c00ac009c027c014003d003c0035002f01000018000d000c000a04010201000104030203000a000400020017

(1)   Message-Authenticator = 0x9cfccae10d6c23328595355295df3638

(1) session-state: No cached attributes

(1) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default

(1)   authorize {

(1)     policy filter_username {

(1)       if (&User-Name) {

(1)       if (&User-Name)  -> TRUE

(1)       if (&User-Name)  {

(1)         if (&User-Name =~ / /) {

(1)         if (&User-Name =~ / /)  -> FALSE

(1)         if (&User-Name =~ /@[^@]*@/ ) {

(1)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE

(1)         if (&User-Name =~ /\.\./ ) {

(1)         if (&User-Name =~ /\.\./ )  -> FALSE

(1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {

(1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE

(1)         if (&User-Name =~ /\.$/)  {

(1)         if (&User-Name =~ /\.$/)   -> FALSE

(1)         if (&User-Name =~ /@\./)  {

(1)         if (&User-Name =~ /@\./)   -> FALSE

(1)       } # if (&User-Name)  = notfound

(1)     } # policy filter_username = notfound

(1)     [preprocess] = ok

(1)     [chap] = noop

(1)     [mschap] = noop

(1)     [digest] = noop

(1) suffix: Checking for suffix after "@"

(1) suffix: No '@' in User-Name = "cam5", looking up realm NULL

(1) suffix: No such realm "NULL"

(1)     [suffix] = noop

(1) eap: Peer sent EAP Response (code 2) ID 6 length 102

(1) eap: No EAP Start, assuming it's an on-going EAP conversation

(1)     [eap] = updated

(1) files: users: Matched entry cam5 at line 87

(1)     [files] = ok

(1)     [expiration] = noop

(1)     [logintime] = noop

(1) pap: WARNING: Auth-Type already set.  Not setting to PAP

(1)     [pap] = noop

(1)   } # authorize = updated

(1) Found Auth-Type = eap

(1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default

(1)   authenticate {

(1) eap: Expiring EAP session with state 0x1b301b2c1b36165c

(1) eap: Finished EAP session with state 0x1b301b2c1b36165c

(1) eap: Previous EAP request found for state 0x1b301b2c1b36165c, released from the list

(1) eap: Peer sent packet with method EAP TLS (13)

(1) eap: Calling submodule eap_tls to process data

(1) eap_tls: Continuing EAP-TLS

(1) eap_tls: Peer indicated complete TLS record size will be 92 bytes

(1) eap_tls: Got complete TLS record (92 bytes)

(1) eap_tls: [eaptls verify] = length included

(1) eap_tls: (other): before SSL initialization

(1) eap_tls: TLS_accept: before SSL initialization

(1) eap_tls: TLS_accept: before SSL initialization

(1) eap_tls: <<< recv TLS 1.2  [length 0057]

(1) eap_tls: TLS_accept: SSLv3/TLS read client hello

(1) eap_tls: >>> send TLS 1.2  [length 002a]

(1) eap_tls: TLS_accept: SSLv3/TLS write server hello

(1) eap_tls: >>> send TLS 1.2  [length 05dc]

(1) eap_tls: TLS_accept: SSLv3/TLS write certificate

(1) eap_tls: >>> send TLS 1.2  [length 014d]

(1) eap_tls: TLS_accept: SSLv3/TLS write key exchange

(1) eap_tls: >>> send TLS 1.2  [length 004c]

(1) eap_tls: TLS_accept: SSLv3/TLS write certificate request

(1) eap_tls: >>> send TLS 1.2  [length 0004]

(1) eap_tls: TLS_accept: SSLv3/TLS write server done

(1) eap_tls: TLS_accept: Need to read more data: SSLv3/TLS write server done

(1) eap_tls: In SSL Handshake Phase

(1) eap_tls: In SSL Accept mode

(1) eap_tls: [eaptls process] = handled

(1) eap: Sending EAP Request (code 1) ID 7 length 1004

(1) eap: EAP session adding &reply:State = 0x1b301b2c1a37165c

(1)     [eap] = handled

(1)   } # authenticate = handled

(1) Using Post-Auth-Type Challenge

(1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default

(1)   Challenge { ... } # empty sub-section is ignored

(1) Sent Access-Challenge Id 52 from 192.168.0.222:1812 to 192.168.0.239:1028 length 0

(1)   EAP-Message = 0x010703ec0dc0000007bc160303002a020000260303b2d244ac8ee4502f0c3224e3fcc9df7816bf63699f367a92929a97ac992a230c00c0270016030305dc0b0005d80005d50002b9308202b53082019d020900c1ce0581de11e02e300d06092a864886f70d01010b0500301e310b300906035504061302

(1)   Message-Authenticator = 0x00000000000000000000000000000000

(1)   State = 0x1b301b2c1a37165ca1b3f5c2affdbb31

(1) Finished request

Waking up in 4.9 seconds.

(2) Received Access-Request Id 53 from 192.168.0.239:1028 to 192.168.0.222:1812 length 145

(2)   User-Name = "cam5"

(2)   Called-Station-Id = "9c-3d-cf-e3-f6-65"

(2)   Calling-Station-Id = "00-07-5f-a7-9f-13"

(2)   NAS-Identifier = "9c-3d-cf-e3-f6-63"

(2)   NAS-Port = 1

(2)   Framed-MTU = 1500

(2)   NAS-Port-Type = Ethernet

(2)   State = 0x1b301b2c1a37165ca1b3f5c2affdbb31

(2)   EAP-Message = 0x020700060d00

(2)   Message-Authenticator = 0xc1d68169efdb5821030956d5f03f4249

(2) session-state: No cached attributes

(2) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default

(2)   authorize {

(2)     policy filter_username {

(2)       if (&User-Name) {

(2)       if (&User-Name)  -> TRUE

(2)       if (&User-Name)  {

(2)         if (&User-Name =~ / /) {

(2)         if (&User-Name =~ / /)  -> FALSE

(2)         if (&User-Name =~ /@[^@]*@/ ) {

(2)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE

(2)         if (&User-Name =~ /\.\./ ) {

(2)         if (&User-Name =~ /\.\./ )  -> FALSE

(2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {

(2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE

(2)         if (&User-Name =~ /\.$/)  {

(2)         if (&User-Name =~ /\.$/)   -> FALSE

(2)         if (&User-Name =~ /@\./)  {

(2)         if (&User-Name =~ /@\./)   -> FALSE

(2)       } # if (&User-Name)  = notfound

(2)     } # policy filter_username = notfound

(2)     [preprocess] = ok

(2)     [chap] = noop

(2)     [mschap] = noop

(2)     [digest] = noop

(2) suffix: Checking for suffix after "@"

(2) suffix: No '@' in User-Name = "cam5", looking up realm NULL

(2) suffix: No such realm "NULL"

(2)     [suffix] = noop

(2) eap: Peer sent EAP Response (code 2) ID 7 length 6

(2) eap: No EAP Start, assuming it's an on-going EAP conversation

(2)     [eap] = updated

(2) files: users: Matched entry cam5 at line 87

(2)     [files] = ok

(2)     [expiration] = noop

(2)     [logintime] = noop

(2) pap: WARNING: Auth-Type already set.  Not setting to PAP

(2)     [pap] = noop

(2)   } # authorize = updated

(2) Found Auth-Type = eap

(2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default

(2)   authenticate {

(2) eap: Expiring EAP session with state 0x1b301b2c1a37165c

(2) eap: Finished EAP session with state 0x1b301b2c1a37165c

(2) eap: Previous EAP request found for state 0x1b301b2c1a37165c, released from the list

(2) eap: Peer sent packet with method EAP TLS (13)

(2) eap: Calling submodule eap_tls to process data

(2) eap_tls: Continuing EAP-TLS

(2) eap_tls: Peer ACKed our handshake fragment

(2) eap_tls: [eaptls verify] = request

(2) eap_tls: [eaptls process] = handled

(2) eap: Sending EAP Request (code 1) ID 8 length 996

(2) eap: EAP session adding &reply:State = 0x1b301b2c1938165c

(2)     [eap] = handled

(2)   } # authenticate = handled

(2) Using Post-Auth-Type Challenge

(2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default

(2)   Challenge { ... } # empty sub-section is ignored

(2) Sent Access-Challenge Id 53 from 192.168.0.222:1812 to 192.168.0.239:1028 length 0

(2)   EAP-Message = 0x010803e40d80000007bcd107270420a7559985709ac39ad7e08f42a3c82a2635c5fb62b0ed9d7c1c7214852d39bc88bac232264c19637fb799974ce29856a19c00c00adb45ffc8ba7662afbd74e20a950cdb8291c1f839075e75ce59db3d042d56e5ef2479bc29b863ac4b7e7f16a586de87d5ab14e108

(2)   Message-Authenticator = 0x00000000000000000000000000000000

(2)   State = 0x1b301b2c1938165ca1b3f5c2affdbb31

(2) Finished request

Waking up in 4.9 seconds.

(3) Received Access-Request Id 54 from 192.168.0.239:1028 to 192.168.0.222:1812 length 156

(3)   User-Name = "cam5"

(3)   Called-Station-Id = "9c-3d-cf-e3-f6-65"

(3)   Calling-Station-Id = "00-07-5f-a7-9f-13"

(3)   NAS-Identifier = "9c-3d-cf-e3-f6-63"

(3)   NAS-Port = 1

(3)   Framed-MTU = 1500

(3)   NAS-Port-Type = Ethernet

(3)   State = 0x1b301b2c1938165ca1b3f5c2affdbb31

(3)   EAP-Message = 0x020800110d80000000071503030002022a

(3)   Message-Authenticator = 0x6c18fff4015a4e1f59180ac006099e78

(3) session-state: No cached attributes

(3) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default

(3)   authorize {

(3)     policy filter_username {

(3)       if (&User-Name) {

(3)       if (&User-Name)  -> TRUE

(3)       if (&User-Name)  {

(3)         if (&User-Name =~ / /) {

(3)         if (&User-Name =~ / /)  -> FALSE

(3)         if (&User-Name =~ /@[^@]*@/ ) {

(3)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE

(3)         if (&User-Name =~ /\.\./ ) {

(3)         if (&User-Name =~ /\.\./ )  -> FALSE

(3)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {

(3)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE

(3)         if (&User-Name =~ /\.$/)  {

(3)         if (&User-Name =~ /\.$/)   -> FALSE

(3)         if (&User-Name =~ /@\./)  {

(3)         if (&User-Name =~ /@\./)   -> FALSE

(3)       } # if (&User-Name)  = notfound

(3)     } # policy filter_username = notfound

(3)     [preprocess] = ok

(3)     [chap] = noop

(3)     [mschap] = noop

(3)     [digest] = noop

(3) suffix: Checking for suffix after "@"

(3) suffix: No '@' in User-Name = "cam5", looking up realm NULL

(3) suffix: No such realm "NULL"

(3)     [suffix] = noop

(3) eap: Peer sent EAP Response (code 2) ID 8 length 17

(3) eap: No EAP Start, assuming it's an on-going EAP conversation

(3)     [eap] = updated

(3) files: users: Matched entry cam5 at line 87

(3)     [files] = ok

(3)     [expiration] = noop

(3)     [logintime] = noop

(3) pap: WARNING: Auth-Type already set.  Not setting to PAP

(3)     [pap] = noop

(3)   } # authorize = updated

(3) Found Auth-Type = eap

(3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default

(3)   authenticate {

(3) eap: Expiring EAP session with state 0x1b301b2c1938165c

(3) eap: Finished EAP session with state 0x1b301b2c1938165c

(3) eap: Previous EAP request found for state 0x1b301b2c1938165c, released from the list

(3) eap: Peer sent packet with method EAP TLS (13)

(3) eap: Calling submodule eap_tls to process data

(3) eap_tls: Continuing EAP-TLS

(3) eap_tls: Peer indicated complete TLS record size will be 7 bytes

(3) eap_tls: Got complete TLS record (7 bytes)

(3) eap_tls: [eaptls verify] = length included

(3) eap_tls: <<< recv TLS 1.2  [length 0002]

(3) eap_tls: ERROR: TLS Alert read:fatal:bad certificate

(3) eap_tls: TLS_accept: Need to read more data: SSLv3/TLS write server done

(3) eap_tls: ERROR: Failed in __FUNCTION__ (SSL_read): error:14094412:SSL routines:ssl3_read_bytes:sslv3 alert bad certificate

(3) eap_tls: ERROR: System call (I/O) error (-1)

(3) eap_tls: ERROR: TLS receive handshake failed during operation

(3) eap_tls: ERROR: [eaptls process] = fail

(3) eap: ERROR: Failed continuing EAP TLS (13) session.  EAP sub-module failed

(3) eap: Sending EAP Failure (code 4) ID 8 length 4

(3) eap: Failed in EAP select

(3)     [eap] = invalid

(3)   } # authenticate = invalid

(3) Failed to authenticate the user

(3) Using Post-Auth-Type Reject

(3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default

(3)   Post-Auth-Type REJECT {

(3) attr_filter.access_reject: EXPAND %{User-Name}

(3) attr_filter.access_reject:    --> cam5

(3) attr_filter.access_reject: Matched entry DEFAULT at line 11

(3)     [attr_filter.access_reject] = updated

(3)     [eap] = noop

(3)     policy remove_reply_message_if_eap {

(3)       if (&reply:EAP-Message && &reply:Reply-Message) {

(3)       if (&reply:EAP-Message && &reply:Reply-Message)  -> FALSE

(3)       else {

(3)         [noop] = noop

(3)       } # else = noop

(3)     } # policy remove_reply_message_if_eap = noop

(3)   } # Post-Auth-Type REJECT = updated

(3) Delaying response for 1.000000 seconds

Waking up in 0.3 seconds.

Waking up in 0.6 seconds.

(3) Sending delayed response

(3) Sent Access-Reject Id 54 from 192.168.0.222:1812 to 192.168.0.239:1028 length 44

(3)   EAP-Message = 0x04080004

(3)   Message-Authenticator = 0x00000000000000000000000000000000

Waking up in 3.8 seconds.

(0) Cleaning up request packet ID 51 with timestamp +35

(1) Cleaning up request packet ID 52 with timestamp +35

(2) Cleaning up request packet ID 53 with timestamp +35

(3) Cleaning up request packet ID 54 with timestamp +35

Ready to process requests

Regards Dominique

Radius eap- tls certificate failure

Dominique der