Re: Timeout and TLS handshake

1 Apr 2025

      I haven't run up FreeRADIUS in ACA or ACI but suspect it might be due
to this: https://lists.freeradius.org/pipermail/freeradius-users/2024-September/10475...
...
...
...
You need to be very careful running a RADIUS server in Azure if you're
using RADIUS/UDP.

Azure has a network security feature on by default that drops
fragmented UDP packets that arrive out of order. This negatively
impacts RADIUS/UDP traffic.

To give you an example, at least 20% of EAP-TLS auth attempts were
failing for us in the cert auth phase due to this issue.

Azure support can turn on the 'enable-udp-fragment-reordering' feature
by request after providing packet captures and use case info etc. They
will also only turn it on in a brand new subscription that's dedicated
to running VMs that require this feature. After we did this, our auth
success rate increased to 100%.

Another thing to be wary of is setting 'tls_max_version' to 1.3.
Windows 11 supports TLS 1.3 by default for EAP-TLS etc but does not
yet support session resumption when using this protocol (see
https://learn.microsoft.com/en-us/windows-server/networking/technologies/ext...).
It's worth dropping the Max version to 1.2.
...
...
...
Try implementing RadSec if your equipment supports it.

On Wed, 2 Apr 2025 at 01:47, Sam Hutchings <samhutchings1415@gmail.com> wrote:
...
Hi,
Please can you advise why the connection is not succeeding?
The Problem:
A Windows client is not succeeding authentication and the debug does
not show that the TLS handshake completes over WAN; the server is
hosted in Azure Container Instance. I have tested the same container
locally on the LAN which is working OK (docker container running on a
VM with a separate laptop with 802.1x configured with a switch set as
the NAC).
I can see the TLS handshake when comparing to a working example seems
to be missing the below:
(6)   &session-state:TLS-Session-Cipher-Suite = "TLS_AES_256_GCM_SHA384"
(6)   &session-state:TLS-Session-Version = "TLS 1.3"
(6)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.3 Handshake, Finished"
What you are trying to do:  Authenticate a Windows client via 802.1X
with EAP-TLS over the internet to an Azure Container Instance running
freeRADIUS.
This is behind a load balancer with a public IP, which includes a
health check on port 8080. This works when using eapol_test but not
when using Windows authentication. Although, this works for both
Windows and eapol_test when running the container on the local
network.
why you are trying to do it: Understand why this fails the TLS
handshake over the internet.
what you expect the server to do: TLS handshake to complete and
authentication request to receive an Access-Accept
what the server does instead (i.e. debug output):
FreeRADIUS Version 3.2.7
Copyright (C) 1999-2023 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/freeradius/dictionary
including configuration file /etc/freeradius/radiusd.conf
including configuration file /etc/freeradius/proxy.conf
including configuration file /etc/freeradius/clients.conf
including files in directory /etc/freeradius/mods-enabled/
including configuration file /etc/freeradius/mods-enabled/always
including configuration file /etc/freeradius/mods-enabled/attr_filter
including configuration file /etc/freeradius/mods-enabled/chap
including configuration file /etc/freeradius/mods-enabled/date
including configuration file /etc/freeradius/mods-enabled/detail
including configuration file /etc/freeradius/mods-enabled/detail.log
including configuration file /etc/freeradius/mods-enabled/digest
including configuration file /etc/freeradius/mods-enabled/dynamic_clients
including configuration file /etc/freeradius/mods-enabled/eap
including configuration file /etc/freeradius/mods-enabled/echo
including configuration file /etc/freeradius/mods-enabled/exec
including configuration file /etc/freeradius/mods-enabled/expiration
including configuration file /etc/freeradius/mods-enabled/expr
including configuration file /etc/freeradius/mods-enabled/files
including configuration file /etc/freeradius/mods-enabled/linelog
including configuration file /etc/freeradius/mods-enabled/logintime
including configuration file /etc/freeradius/mods-enabled/mschap
including configuration file /etc/freeradius/mods-enabled/ntlm_auth
including configuration file /etc/freeradius/mods-enabled/pap
including configuration file /etc/freeradius/mods-enabled/passwd
including configuration file /etc/freeradius/mods-enabled/preprocess
including configuration file /etc/freeradius/mods-enabled/proxy_rate_limit
including configuration file /etc/freeradius/mods-enabled/radutmp
including configuration file /etc/freeradius/mods-enabled/realm
including configuration file /etc/freeradius/mods-enabled/replicate
including configuration file /etc/freeradius/mods-enabled/soh
including configuration file /etc/freeradius/mods-enabled/sradutmp
including configuration file /etc/freeradius/mods-enabled/totp
including configuration file /etc/freeradius/mods-enabled/unix
including configuration file /etc/freeradius/mods-enabled/unpack
including configuration file /etc/freeradius/mods-enabled/utf8
including files in directory /etc/freeradius/policy.d/
including configuration file /etc/freeradius/policy.d/abfab-tr
including configuration file /etc/freeradius/policy.d/accounting
including configuration file /etc/freeradius/policy.d/canonicalization
including configuration file /etc/freeradius/policy.d/control
including configuration file /etc/freeradius/policy.d/cui
including configuration file /etc/freeradius/policy.d/debug
including configuration file /etc/freeradius/policy.d/dhcp
including configuration file /etc/freeradius/policy.d/eap
including configuration file /etc/freeradius/policy.d/filter
including configuration file /etc/freeradius/policy.d/moonshot-targeted-ids
including configuration file /etc/freeradius/policy.d/operator-name
including configuration file /etc/freeradius/policy.d/rfc7542
including files in directory /etc/freeradius/sites-enabled/
including configuration file /etc/freeradius/sites-enabled/default
including configuration file /etc/freeradius/sites-enabled/inner-tunnel
including configuration file /etc/freeradius/sites-enabled/check-eap-tls
including configuration file /etc/freeradius/sites-enabled/status
main {
 security {
         allow_core_dumps = no
 }
        name = "radiusd"
        prefix = "@prefix@"
        localstatedir = "@localstatedir@"
        logdir = "@logdir@"
        run_dir = "@localstatedir@/run/radiusd"
}
main {
        name = "radiusd"
        prefix = "@prefix@"
        localstatedir = "@localstatedir@"
        sbindir = "@sbindir@"
        logdir = "@logdir@"
        run_dir = "@localstatedir@/run/radiusd"
        libdir = "@libdir@"
        radacctdir = "@radacctdir@"
        hostname_lookups = no
        max_request_time = 30
        proxy_dedup_window = 1
        cleanup_delay = 30
        max_requests = 16384
        max_fds = 512
        postauth_client_lost = no
        pidfile = "@localstatedir@/run/radiusd/radiusd.pid"
        checkrad = "@sbindir@/checkrad"
        debug_level = 0
        proxy_requests = yes
 log {
         stripped_names = no
         auth = no
         auth_badpass = no
         auth_goodpass = no
         colourise = yes
         msg_denied = "You are already logged in - access denied"
 }
 resources {
 }
 security {
         max_attributes = 200
         reject_delay = 1.000000
         status_server = yes
         require_message_authenticator = "auto"
         limit_proxy_state = "auto"
 }
 unlang {
         group_stop_return = no
         policy_stop_return = no
 }
}
radiusd: #### Loading Realms and Home Servers ####
 proxy server {
         retry_delay = 5
         retry_count = 3
         default_fallback = no
         dead_time = 120
         wake_all_if_all_dead = no
 }
 home_server localhost {
         nonblock = no
         ipaddr = 127.0.0.1
         port = 1812
         type = "auth"
         secret = <<< secret >>>
         response_window = 20.000000
         response_timeouts = 1
         max_outstanding = 65536
         zombie_period = 40
         status_check = "status-server"
         ping_interval = 30
         check_interval = 30
         check_timeout = 4
         num_answers_to_alive = 3
         revive_interval = 120
  limit {
         max_connections = 16
         max_requests = 0
         lifetime = 0
         idle_timeout = 0
  }
  coa {
         irt = 2
         mrt = 16
         mrc = 5
         mrd = 30
  }
 }
 home_server_pool my_auth_failover {
        type = fail-over
        home_server = localhost
 }
 realm example.com {
        auth_pool = my_auth_failover
 }
 realm LOCAL {
 }
radiusd: #### Loading Clients ####
 client localhost {
         ipaddr = 127.0.0.1
         require_message_authenticator = "auto"
         limit_proxy_state = "auto"
         secret = <<< secret >>>
         proto = "*"
  limit {
         max_connections = 16
         lifetime = 0
         idle_timeout = 30
  }
 }
Shared secret for client localhost is short, and likely can be broken
by an attacker.
 client localhost_ipv6 {
         ipv6addr = ::1
         secret = <<< secret >>>
  limit {
         max_connections = 16
         lifetime = 0
         idle_timeout = 30
  }
 }
Shared secret for client localhost_ipv6 is short, and likely can be
broken by an attacker.
 client radiustesting {
         ipaddr = 185.241.224.187
         secret = <<< secret >>>
  limit {
         max_connections = 16
         lifetime = 0
         idle_timeout = 30
  }
 }
Debug state unknown (cap_sys_ptrace capability not set)
Configuration version: 7161-5ad1-6c77-638f
systemd watchdog is disabled
 # Creating Auth-Type = mschap
 # Creating Auth-Type = digest
 # Creating Auth-Type = eap
 # Creating Auth-Type = PAP
 # Creating Auth-Type = CHAP
 # Creating Auth-Type = MS-CHAP
 # Creating Autz-Type = New-TLS-Connection
 # Creating Autz-Type = Status-Server
radiusd: #### Instantiating modules ####
 modules {
  # Loaded module rlm_always
  # Loading module "reject" from file /etc/freeradius/mods-enabled/always
  always reject {
         rcode = "reject"
         simulcount = 0
         mpp = no
  }
  # Loading module "fail" from file /etc/freeradius/mods-enabled/always
  always fail {
         rcode = "fail"
         simulcount = 0
         mpp = no
  }
  # Loading module "ok" from file /etc/freeradius/mods-enabled/always
  always ok {
         rcode = "ok"
         simulcount = 0
         mpp = no
  }
  # Loading module "handled" from file /etc/freeradius/mods-enabled/always
  always handled {
         rcode = "handled"
         simulcount = 0
         mpp = no
  }
  # Loading module "invalid" from file /etc/freeradius/mods-enabled/always
  always invalid {
         rcode = "invalid"
         simulcount = 0
         mpp = no
  }
  # Loading module "userlock" from file /etc/freeradius/mods-enabled/always
  always userlock {
         rcode = "userlock"
         simulcount = 0
         mpp = no
  }
  # Loading module "notfound" from file /etc/freeradius/mods-enabled/always
  always notfound {
         rcode = "notfound"
         simulcount = 0
         mpp = no
  }
  # Loading module "noop" from file /etc/freeradius/mods-enabled/always
  always noop {
         rcode = "noop"
         simulcount = 0
         mpp = no
  }
  # Loading module "updated" from file /etc/freeradius/mods-enabled/always
  always updated {
         rcode = "updated"
         simulcount = 0
         mpp = no
  }
  # Loaded module rlm_attr_filter
  # Loading module "attr_filter.post-proxy" from file
/etc/freeradius/mods-enabled/attr_filter
  attr_filter attr_filter.post-proxy {
         filename = "/etc/freeradius/mods-config/attr_filter/post-proxy"
         key = "%{Realm}"
         relaxed = no
  }
  # Loading module "attr_filter.pre-proxy" from file
/etc/freeradius/mods-enabled/attr_filter
  attr_filter attr_filter.pre-proxy {
         filename = "/etc/freeradius/mods-config/attr_filter/pre-proxy"
         key = "%{Realm}"
         relaxed = no
  }
  # Loading module "attr_filter.access_reject" from file
/etc/freeradius/mods-enabled/attr_filter
  attr_filter attr_filter.access_reject {
         filename = "/etc/freeradius/mods-config/attr_filter/access_reject"
         key = "%{User-Name}"
         relaxed = no
  }
  # Loading module "attr_filter.access_challenge" from file
/etc/freeradius/mods-enabled/attr_filter
  attr_filter attr_filter.access_challenge {
         filename = "/etc/freeradius/mods-config/attr_filter/access_challenge"
         key = "%{User-Name}"
         relaxed = no
  }
  # Loading module "attr_filter.accounting_response" from file
/etc/freeradius/mods-enabled/attr_filter
  attr_filter attr_filter.accounting_response {
         filename =
"/etc/freeradius/mods-config/attr_filter/accounting_response"
         key = "%{User-Name}"
         relaxed = no
  }
  # Loading module "attr_filter.coa" from file
/etc/freeradius/mods-enabled/attr_filter
  attr_filter attr_filter.coa {
         filename = "/etc/freeradius/mods-config/attr_filter/coa"
         key = "%{User-Name}"
         relaxed = no
  }
  # Loaded module rlm_chap
  # Loading module "chap" from file /etc/freeradius/mods-enabled/chap
  # Loaded module rlm_date
  # Loading module "date" from file /etc/freeradius/mods-enabled/date
  date {
         format = "%b %e %Y %H:%M:%S %Z"
         utc = no
  }
  # Loading module "wispr2date" from file /etc/freeradius/mods-enabled/date
  date wispr2date {
         format = "%Y-%m-%dT%H:%M:%S"
         utc = no
  }
  # Loaded module rlm_detail
  # Loading module "detail" from file /etc/freeradius/mods-enabled/detail
  detail {
         filename =
"@radacctdir@/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
         header = "%t"
         permissions = 384
         locking = no
         dates_as_integer = no
         escape_filenames = no
         log_packet_header = no
  }
  # Loading module "auth_log" from file /etc/freeradius/mods-enabled/detail.log
  detail auth_log {
         filename =
"@radacctdir@/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
         header = "%t"
         permissions = 384
         locking = no
         dates_as_integer = no
         escape_filenames = no
         log_packet_header = no
  }
  # Loading module "reply_log" from file /etc/freeradius/mods-enabled/detail.log
  detail reply_log {
         filename =
"@radacctdir@/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
         header = "%t"
         permissions = 384
         locking = no
         dates_as_integer = no
         escape_filenames = no
         log_packet_header = no
  }
  # Loading module "pre_proxy_log" from file
/etc/freeradius/mods-enabled/detail.log
  detail pre_proxy_log {
         filename =
"@radacctdir@/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
         header = "%t"
         permissions = 384
         locking = no
         dates_as_integer = no
         escape_filenames = no
         log_packet_header = no
  }
  # Loading module "post_proxy_log" from file
/etc/freeradius/mods-enabled/detail.log
  detail post_proxy_log {
         filename =
"@radacctdir@/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
         header = "%t"
         permissions = 384
         locking = no
         dates_as_integer = no
         escape_filenames = no
         log_packet_header = no
  }
  # Loaded module rlm_digest
  # Loading module "digest" from file /etc/freeradius/mods-enabled/digest
  # Loaded module rlm_dynamic_clients
  # Loading module "dynamic_clients" from file
/etc/freeradius/mods-enabled/dynamic_clients
  # Loaded module rlm_eap
  # Loading module "eap" from file /etc/freeradius/mods-enabled/eap
  eap {
         default_eap_type = "tls"
         timer_expire = 60
         max_eap_type = 52
         ignore_unknown_eap_types = no
         cisco_accounting_username_bug = no
         max_sessions = 16384
         dedup_key = "%{Calling-Station-Id}"
  }
  # Loaded module rlm_exec
  # Loading module "echo" from file /etc/freeradius/mods-enabled/echo
  exec echo {
         wait = yes
         program = "/bin/echo %{User-Name}"
         input_pairs = "request"
         output_pairs = "reply"
         shell_escape = yes
  }
  # Loading module "exec" from file /etc/freeradius/mods-enabled/exec
  exec {
         wait = no
         input_pairs = "request"
         shell_escape = yes
         timeout = 10
  }
  # Loaded module rlm_expiration
  # Loading module "expiration" from file
/etc/freeradius/mods-enabled/expiration
  # Loaded module rlm_expr
  # Loading module "expr" from file /etc/freeradius/mods-enabled/expr
  expr {
         safe_characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
/äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
  }
  # Loaded module rlm_files
  # Loading module "files" from file /etc/freeradius/mods-enabled/files
  files {
         filename = "/etc/freeradius/mods-config/files/authorize"
         acctusersfile = "/etc/freeradius/mods-config/files/accounting"
         preproxy_usersfile = "/etc/freeradius/mods-config/files/pre-proxy"
  }
  # Loaded module rlm_linelog
  # Loading module "linelog" from file /etc/freeradius/mods-enabled/linelog
  linelog {
         filename = "@logdir@/linelog"
         escape_filenames = no
         syslog_severity = "info"
         permissions = 384
         format = "This is a log message for %{User-Name}"
         reference = "messages.%{%{reply:Packet-Type}:-default}"
  }
  # Loading module "log_accounting" from file
/etc/freeradius/mods-enabled/linelog
  linelog log_accounting {
         filename = "@logdir@/linelog-accounting"
         escape_filenames = no
         syslog_severity = "info"
         permissions = 384
         format = ""
         reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
  }
  # Loaded module rlm_logintime
  # Loading module "logintime" from file /etc/freeradius/mods-enabled/logintime
  logintime {
         minimum_timeout = 60
  }
  # Loaded module rlm_mschap
  # Loading module "mschap" from file /etc/freeradius/mods-enabled/mschap
  mschap {
         use_mppe = yes
         require_encryption = no
         require_strong = no
         with_ntdomain_hack = yes
   passchange {
   }
         allow_retry = yes
         winbind_retry_with_normalised_username = no
  }
  # Loading module "ntlm_auth" from file /etc/freeradius/mods-enabled/ntlm_auth
  exec ntlm_auth {
         wait = yes
         program = "/path/to/ntlm_auth --request-nt-key
--domain=MYDOMAIN --username=%{mschap:User-Name}
--password=%{User-Password}"
         shell_escape = yes
  }
  # Loaded module rlm_pap
  # Loading module "pap" from file /etc/freeradius/mods-enabled/pap
  pap {
         normalise = yes
  }
  # Loaded module rlm_passwd
  # Loading module "etc_passwd" from file /etc/freeradius/mods-enabled/passwd
  passwd etc_passwd {
         filename = "/etc/passwd"
         format = "*User-Name:Crypt-Password:"
         delimiter = ":"
         ignore_nislike = no
         ignore_empty = yes
         allow_multiple_keys = no
         hash_size = 100
  }
  # Loaded module rlm_preprocess
  # Loading module "preprocess" from file
/etc/freeradius/mods-enabled/preprocess
  preprocess {
         huntgroups = "/etc/freeradius/mods-config/preprocess/huntgroups"
         hints = "/etc/freeradius/mods-config/preprocess/hints"
         with_ascend_hack = no
         ascend_channels_per_line = 23
         with_ntdomain_hack = no
         with_specialix_jetstream_hack = no
         with_cisco_vsa_hack = no
         with_alvarion_vsa_hack = no
  }
  # Loaded module rlm_proxy_rate_limit
  # Loading module "proxy_rate_limit" from file
/etc/freeradius/mods-enabled/proxy_rate_limit
  proxy_rate_limit {
         max_entries = 2048
         idle_timeout = 10
         num_subtables = 256
         window = 1
  }
  # Loaded module rlm_radutmp
  # Loading module "radutmp" from file /etc/freeradius/mods-enabled/radutmp
  radutmp {
         filename = "@logdir@/radutmp"
         username = "%{User-Name}"
         case_sensitive = yes
         check_with_nas = yes
         permissions = 384
         caller_id = yes
  }
  # Loaded module rlm_realm
  # Loading module "IPASS" from file /etc/freeradius/mods-enabled/realm
  realm IPASS {
         format = "prefix"
         delimiter = "/"
         ignore_default = no
         ignore_null = no
  }
  # Loading module "suffix" from file /etc/freeradius/mods-enabled/realm
  realm suffix {
         format = "suffix"
         delimiter = "@"
         ignore_default = no
         ignore_null = no
  }
  # Loading module "bangpath" from file /etc/freeradius/mods-enabled/realm
  realm bangpath {
         format = "prefix"
         delimiter = "!"
         ignore_default = no
         ignore_null = no
  }
  # Loading module "realmpercent" from file /etc/freeradius/mods-enabled/realm
  realm realmpercent {
         format = "suffix"
         delimiter = "%"
         ignore_default = no
         ignore_null = no
  }
  # Loading module "ntdomain" from file /etc/freeradius/mods-enabled/realm
  realm ntdomain {
         format = "prefix"
         delimiter = "\"
         ignore_default = no
         ignore_null = no
  }
  # Loaded module rlm_replicate
  # Loading module "replicate" from file /etc/freeradius/mods-enabled/replicate
  # Loaded module rlm_soh
  # Loading module "soh" from file /etc/freeradius/mods-enabled/soh
  soh {
         dhcp = yes
  }
  # Loading module "sradutmp" from file /etc/freeradius/mods-enabled/sradutmp
  radutmp sradutmp {
         filename = "@logdir@/sradutmp"
         username = "%{User-Name}"
         case_sensitive = yes
         check_with_nas = yes
         permissions = 420
         caller_id = no
  }
  # Loaded module rlm_totp
  # Loading module "totp" from file /etc/freeradius/mods-enabled/totp
  totp {
         time_step = 30
         otp_length = 6
         lookback_steps = 1
         lookback_interval = 30
         lookforward_steps = 0
  }
  # Loaded module rlm_unix
  # Loading module "unix" from file /etc/freeradius/mods-enabled/unix
  unix {
         radwtmp = "@logdir@/radwtmp"
  }
Creating attribute Unix-Group
  # Loaded module rlm_unpack
  # Loading module "unpack" from file /etc/freeradius/mods-enabled/unpack
  # Loaded module rlm_utf8
  # Loading module "utf8" from file /etc/freeradius/mods-enabled/utf8
  instantiate {
  }
  # Instantiating module "reject" from file /etc/freeradius/mods-enabled/always
  # Instantiating module "fail" from file /etc/freeradius/mods-enabled/always
  # Instantiating module "ok" from file /etc/freeradius/mods-enabled/always
  # Instantiating module "handled" from file /etc/freeradius/mods-enabled/always
  # Instantiating module "invalid" from file /etc/freeradius/mods-enabled/always
  # Instantiating module "userlock" from file
/etc/freeradius/mods-enabled/always
  # Instantiating module "notfound" from file
/etc/freeradius/mods-enabled/always
  # Instantiating module "noop" from file /etc/freeradius/mods-enabled/always
  # Instantiating module "updated" from file /etc/freeradius/mods-enabled/always
  # Instantiating module "attr_filter.post-proxy" from file
/etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/post-proxy
  # Instantiating module "attr_filter.pre-proxy" from file
/etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/pre-proxy
  # Instantiating module "attr_filter.access_reject" from file
/etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/access_reject
  # Instantiating module "attr_filter.access_challenge" from file
/etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/access_challenge
  # Instantiating module "attr_filter.accounting_response" from file
/etc/freeradius/mods-enabled/attr_filter
reading pairlist file
/etc/freeradius/mods-config/attr_filter/accounting_response
  # Instantiating module "attr_filter.coa" from file
/etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/coa
  # Instantiating module "detail" from file /etc/freeradius/mods-enabled/detail
  # Instantiating module "auth_log" from file
/etc/freeradius/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
detail output
  # Instantiating module "reply_log" from file
/etc/freeradius/mods-enabled/detail.log
  # Instantiating module "pre_proxy_log" from file
/etc/freeradius/mods-enabled/detail.log
  # Instantiating module "post_proxy_log" from file
/etc/freeradius/mods-enabled/detail.log
/etc/freeradius/mods-enabled/eap[56]: Found dynamic expansion in
string which will not be dynamically expanded
  # Instantiating module "eap" from file /etc/freeradius/mods-enabled/eap
   # Linked to sub-module rlm_eap_md5
   # Linked to sub-module rlm_eap_gtc
   gtc {
         challenge = "Password: "
         auth_type = "PAP"
   }
   # Linked to sub-module rlm_eap_tls
   tls {
         tls = "tls-common"
         virtual_server = "check-eap-tls"
   }
   tls-config tls-common {
         verify_depth = 0
         ca_path = "/etc/freeradius/certs"
         pem_file_type = yes
         private_key_file = "/etc/freeradius/certs/server.pem"
         certificate_file = "/etc/freeradius/certs/server.pem"
         ca_file = "/etc/freeradius/certs/ca.pem"
         private_key_password = <<< secret >>>
         fragment_size = 1024
         include_length = yes
         auto_chain = yes
         check_crl = no
         check_all_crl = no
         ca_path_reload_interval = 0
         cipher_list = "DEFAULT"
         cipher_server_preference = no
         reject_unknown_intermediate_ca = no
         ecdh_curve = ""
         tls_max_version = "1.3"
         tls_min_version = "1.2"
    cache {
         enable = no
         lifetime = 24
         max_entries = 255
    }
    verify {
         skip_if_ocsp_ok = no
    }
    ocsp {
         enable = no
         override_cert_url = yes
         url = "http://127.0.0.1/ocsp/"
         use_nonce = yes
         timeout = 0
         softfail = no
    }
   }
   # Linked to sub-module rlm_eap_ttls
   ttls {
         tls = "tls-common"
         default_eap_type = "md5"
         copy_request_to_tunnel = no
         use_tunneled_reply = no
         virtual_server = "inner-tunnel"
         include_length = yes
         require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_peap
   peap {
         tls = "tls-common"
         default_eap_type = "mschapv2"
         copy_request_to_tunnel = no
         use_tunneled_reply = no
         proxy_tunneled_request_as_eap = yes
         virtual_server = "inner-tunnel"
         soh = no
         require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_mschapv2
   mschapv2 {
         with_ntdomain_hack = no
         send_error = no
   }
  # Instantiating module "expiration" from file
/etc/freeradius/mods-enabled/expiration
  # Instantiating module "files" from file /etc/freeradius/mods-enabled/files
reading pairlist file /etc/freeradius/mods-config/files/authorize
reading pairlist file /etc/freeradius/mods-config/files/accounting
reading pairlist file /etc/freeradius/mods-config/files/pre-proxy
  # Instantiating module "linelog" from file
/etc/freeradius/mods-enabled/linelog
  # Instantiating module "log_accounting" from file
/etc/freeradius/mods-enabled/linelog
  # Instantiating module "logintime" from file
/etc/freeradius/mods-enabled/logintime
  # Instantiating module "mschap" from file /etc/freeradius/mods-enabled/mschap
rlm_mschap (mschap): using internal authentication
  # Instantiating module "pap" from file /etc/freeradius/mods-enabled/pap
  # Instantiating module "etc_passwd" from file
/etc/freeradius/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
  # Instantiating module "preprocess" from file
/etc/freeradius/mods-enabled/preprocess
reading pairlist file /etc/freeradius/mods-config/preprocess/huntgroups
reading pairlist file /etc/freeradius/mods-config/preprocess/hints
  # Instantiating module "proxy_rate_limit" from file
/etc/freeradius/mods-enabled/proxy_rate_limit
  # Instantiating module "IPASS" from file /etc/freeradius/mods-enabled/realm
  # Instantiating module "suffix" from file /etc/freeradius/mods-enabled/realm
  # Instantiating module "bangpath" from file /etc/freeradius/mods-enabled/realm
  # Instantiating module "realmpercent" from file
/etc/freeradius/mods-enabled/realm
  # Instantiating module "ntdomain" from file /etc/freeradius/mods-enabled/realm
  # Instantiating module "totp" from file /etc/freeradius/mods-enabled/totp
 } # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/freeradius/radiusd.conf
} # server
server default { # from file /etc/freeradius/sites-enabled/default
 # Loading authenticate {...}
Compiling Auth-Type PAP for attr Auth-Type
Compiling Auth-Type CHAP for attr Auth-Type
Compiling Auth-Type MS-CHAP for attr Auth-Type
 # Loading authorize {...}
Ignoring "sql" (see raddb/mods-available/README.rst)
Ignoring "ldap" (see raddb/mods-available/README.rst)
Compiling Autz-Type New-TLS-Connection for attr Autz-Type
 # Loading preacct {...}
 # Loading accounting {...}
 # Loading post-auth {...}
Compiling Post-Auth-Type REJECT for attr Post-Auth-Type
Compiling Post-Auth-Type Challenge for attr Post-Auth-Type
Compiling Post-Auth-Type Client-Lost for attr Post-Auth-Type
} # server default
server inner-tunnel { # from file /etc/freeradius/sites-enabled/inner-tunnel
 # Loading authenticate {...}
Compiling Auth-Type PAP for attr Auth-Type
Compiling Auth-Type CHAP for attr Auth-Type
Compiling Auth-Type MS-CHAP for attr Auth-Type
 # Loading authorize {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
 # Skipping contents of 'if' as it is always 'false' --
/etc/freeradius/sites-enabled/inner-tunnel:366
Compiling Post-Auth-Type REJECT for attr Post-Auth-Type
} # server inner-tunnel
server check-eap-tls { # from file /etc/freeradius/sites-enabled/check-eap-tls
 # Loading authorize {...}
} # server check-eap-tls
server status { # from file /etc/freeradius/sites-enabled/status
 # Loading authorize {...}
Compiling Autz-Type Status-Server for attr Autz-Type
} # server status
radiusd: #### Opening IP addresses and Ports ####
listen {
         type = "auth"
         ipaddr = *
         port = 0
   limit {
         max_connections = 128
         lifetime = 30
         idle_timeout = 60
   }
Setting idle_timeout to 0
}
listen {
         type = "acct"
         ipaddr = *
         port = 0
   limit {
         max_connections = 16
         lifetime = 0
         idle_timeout = 30
   }
}
listen {
         type = "auth"
         ipv6addr = ::
         port = 0
   limit {
         max_connections = 16
         lifetime = 0
         idle_timeout = 30
   }
}
listen {
         type = "acct"
         ipv6addr = ::
         port = 0
   limit {
         max_connections = 16
         lifetime = 0
         idle_timeout = 30
   }
}
listen {
         type = "auth"
         ipaddr = 127.0.0.1
         port = 18120
}
listen {
         type = "status"
         ipaddr = *
         port = 8080
         proto = "tcp"
   limit {
         max_connections = 64
         lifetime = 15
         idle_timeout = 30
   }
Setting idle_timeout to 0
         clients = "azure_lb"
  client azure_lb {
         ipaddr = 168.63.129.16
         secret = <<< secret >>>
         proto = "tcp"
   limit {
         max_connections = 16
         lifetime = 0
         idle_timeout = 30
   }
  }
}
Listening on auth address * port 1812 bound to server default
Listening on acct address * port 1813 bound to server default
Listening on auth address :: port 1812 bound to server default
Listening on acct address :: port 1813 bound to server default
Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
Listening on status proto tcp address * port 8080 bound to server status
Listening on proxy address * port 47097
Listening on proxy address :: port 33982
Ready to process requests
 ... new connection request on TCP socket
Listening on status from client (168.63.129.16, 54790) -> (*, 8080,
virtual-server=status)
Waking up in 0.8 seconds.
Waking up in 14.4 seconds.
Client has closed connection
 ... shutting down socket status from client (168.63.129.16, 54790) ->
(*, 8080, virtual-server=status)
Ready to process requests
 ... new connection request on TCP socket
Failed inserting TCP socket into parent list.
Listening on status from client (168.63.129.16, 54858) -> (*, 8080,
virtual-server=status)
Waking up in 0.8 seconds.
Waking up in 14.4 seconds.
Client has closed connection
 ... shutting down socket status from client (168.63.129.16, 54858) ->
(*, 8080, virtual-server=status)
Ready to process requests
 ... new connection request on TCP socket
Failed inserting TCP socket into parent list.
Listening on status from client (168.63.129.16, 54946) -> (*, 8080,
virtual-server=status)
Waking up in 0.8 seconds.
Waking up in 14.4 seconds.
Client has closed connection
 ... shutting down socket status from client (168.63.129.16, 54946) ->
(*, 8080, virtual-server=status)
Ready to process requests
 ... new connection request on TCP socket
Failed inserting TCP socket into parent list.
Listening on status from client (168.63.129.16, 55023) -> (*, 8080,
virtual-server=status)
Waking up in 0.8 seconds.
Waking up in 14.4 seconds.
Client has closed connection
 ... shutting down socket status from client (168.63.129.16, 55023) ->
(*, 8080, virtual-server=status)
Ready to process requests
 ... new connection request on TCP socket
Failed inserting TCP socket into parent list.
Listening on status from client (168.63.129.16, 55116) -> (*, 8080,
virtual-server=status)
Waking up in 0.8 seconds.
Waking up in 14.4 seconds.
Client has closed connection
 ... shutting down socket status from client (168.63.129.16, 55116) ->
(*, 8080, virtual-server=status)
Ready to process requests
 ... new connection request on TCP socket
Failed inserting TCP socket into parent list.
Listening on status from client (168.63.129.16, 55188) -> (*, 8080,
virtual-server=status)
Waking up in 0.8 seconds.
Waking up in 14.4 seconds.
Client has closed connection
 ... shutting down socket status from client (168.63.129.16, 55188) ->
(*, 8080, virtual-server=status)
Ready to process requests
 ... new connection request on TCP socket
Failed inserting TCP socket into parent list.
Listening on status from client (168.63.129.16, 55271) -> (*, 8080,
virtual-server=status)
Waking up in 0.8 seconds.
Waking up in 14.4 seconds.
Client has closed connection
 ... shutting down socket status from client (168.63.129.16, 55271) ->
(*, 8080, virtual-server=status)
Ready to process requests
 ... new connection request on TCP socket
Failed inserting TCP socket into parent list.
Listening on status from client (168.63.129.16, 55341) -> (*, 8080,
virtual-server=status)
Waking up in 0.7 seconds.
Waking up in 14.4 seconds.
Client has closed connection
 ... shutting down socket status from client (168.63.129.16, 55341) ->
(*, 8080, virtual-server=status)
Ready to process requests
 ... new connection request on TCP socket
Failed inserting TCP socket into parent list.
Listening on status from client (168.63.129.16, 55411) -> (*, 8080,
virtual-server=status)
Waking up in 0.7 seconds.
Waking up in 14.4 seconds.
Client has closed connection
 ... shutting down socket status from client (168.63.129.16, 55411) ->
(*, 8080, virtual-server=status)
Ready to process requests
 ... new connection request on TCP socket
Failed inserting TCP socket into parent list.
Listening on status from client (168.63.129.16, 55486) -> (*, 8080,
virtual-server=status)
Waking up in 0.7 seconds.
Waking up in 14.4 seconds.
Client has closed connection
 ... shutting down socket status from client (168.63.129.16, 55486) ->
(*, 8080, virtual-server=status)
Ready to process requests
 ... new connection request on TCP socket
Failed inserting TCP socket into parent list.
Listening on status from client (168.63.129.16, 55575) -> (*, 8080,
virtual-server=status)
Waking up in 0.7 seconds.
Waking up in 14.4 seconds.
Client has closed connection
 ... shutting down socket status from client (168.63.129.16, 55575) ->
(*, 8080, virtual-server=status)
Ready to process requests
 ... new connection request on TCP socket
Failed inserting TCP socket into parent list.
Listening on status from client (168.63.129.16, 55631) -> (*, 8080,
virtual-server=status)
Waking up in 0.7 seconds.
Waking up in 14.4 seconds.
Client has closed connection
 ... shutting down socket status from client (168.63.129.16, 55631) ->
(*, 8080, virtual-server=status)
Ready to process requests
 ... new connection request on TCP socket
Failed inserting TCP socket into parent list.
Listening on status from client (168.63.129.16, 55721) -> (*, 8080,
virtual-server=status)
Waking up in 0.7 seconds.
Waking up in 14.4 seconds.
Client has closed connection
 ... shutting down socket status from client (168.63.129.16, 55721) ->
(*, 8080, virtual-server=status)
Ready to process requests
 ... new connection request on TCP socket
Failed inserting TCP socket into parent list.
Listening on status from client (168.63.129.16, 55790) -> (*, 8080,
virtual-server=status)
Waking up in 0.7 seconds.
Waking up in 14.4 seconds.
Client has closed connection
 ... shutting down socket status from client (168.63.129.16, 55790) ->
(*, 8080, virtual-server=status)
Ready to process requests
 ... new connection request on TCP socket
Failed inserting TCP socket into parent list.
Listening on status from client (168.63.129.16, 55987) -> (*, 8080,
virtual-server=status)
Waking up in 0.7 seconds.
Waking up in 14.4 seconds.
Client has closed connection
 ... shutting down socket status from client (168.63.129.16, 55987) ->
(*, 8080, virtual-server=status)
Ready to process requests
 ... new connection request on TCP socket
Failed inserting TCP socket into parent list.
Listening on status from client (168.63.129.16, 56081) -> (*, 8080,
virtual-server=status)
Waking up in 0.7 seconds.
Waking up in 14.4 seconds.
Client has closed connection
 ... shutting down socket status from client (168.63.129.16, 56081) ->
(*, 8080, virtual-server=status)
Ready to process requests
 ... new connection request on TCP socket
Ignoring new connection due to client max_connections (16)
Ready to process requests
 ... new connection request on TCP socket
Ignoring new connection due to client max_connections (16)
Ready to process requests
 ... new connection request on TCP socket
Ignoring new connection due to client max_connections (16)
Ready to process requests
 ... new connection request on TCP socket
Ignoring new connection due to client max_connections (16)
Ready to process requests
 ... new connection request on TCP socket
Ignoring new connection due to client max_connections (16)
Ready to process requests
 ... new connection request on TCP socket
Ignoring new connection due to client max_connections (16)
Ready to process requests
(0) Received Access-Request Id 225 from 185.241.224.187:35356 to
10.0.0.5:1812 length 195
(0)   NAS-IP-Address = 192.168.1.112
(0)   NAS-Port-Type = Ethernet
(0)   NAS-Port = 4
(0)   User-Name = "host/353ec014-5c70-4e4c-a7c8-b9c8b5860352"
(0)   Acct-Session-Id = "0500003F"
(0)   Called-Station-Id = "A4-B2-39-CD-FE-3F"
(0)   Calling-Station-Id = "28-00-AF-0F-A8-32"
(0)   EAP-Message =
0x0201002e01686f73742f33353365633031342d356337302d346534632d613763382d623963386235383630333532
(0)   Message-Authenticator = 0xfd9f875e95feb822675be4ee23747c02
(0) # Executing section authorize from file
/etc/freeradius/sites-enabled/default
(0)   authorize {
(0)     policy filter_username {
(0)       if (&User-Name) {
(0)       if (&User-Name)  -> TRUE
(0)       if (&User-Name)  {
(0)         if (&User-Name =~ / /) {
(0)         if (&User-Name =~ / /)  -> FALSE
(0)         if (&User-Name =~ /@[^@]*@/ ) {
(0)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(0)         if (&User-Name =~ /\.\./ ) {
(0)         if (&User-Name =~ /\.\./ )  -> FALSE
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
  -> FALSE
(0)         if (&User-Name =~ /\.$/)  {
(0)         if (&User-Name =~ /\.$/)   -> FALSE
(0)         if (&User-Name =~ /@\./)  {
(0)         if (&User-Name =~ /@\./)   -> FALSE
(0)       } # if (&User-Name)  = notfound
(0)     } # policy filter_username = notfound
(0)     [preprocess] = ok
(0)     [chap] = noop
(0)     [mschap] = noop
(0)     [digest] = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: No '@' in User-Name =
"host/353ec014-5c70-4e4c-a7c8-b9c8b5860352", looking up realm NULL
(0) suffix: No such realm "NULL"
(0)     [suffix] = noop
(0) eap: Peer sent EAP Response (code 2) ID 1 length 46
(0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit
the rest of authorize
(0)     [eap] = ok
(0)   } # authorize = ok
(0) Found Auth-Type = eap
(0) # Executing group from file /etc/freeradius/sites-enabled/default
(0)   authenticate {
(0) eap: EXPAND %{Calling-Station-Id}
(0) eap:    --> 28-00-AF-0F-A8-32
(0) eap: Peer sent packet with method EAP Identity (1)
(0) eap: Using default_eap_type = TLS
(0) eap: Calling submodule eap_tls to process data
(0) eap_tls: (TLS) TLS -Initiating new session
(0) eap_tls: (TLS) TLS - Setting verify mode to require certificate from client
(0) eap: Sending EAP Request (code 1) ID 2 length 6
(0) eap: EAP session adding &reply:State = 0xa960c76da962ca67
(0)     [eap] = handled
(0)   } # authenticate = handled
(0) Using Post-Auth-Type Challenge
(0) # Executing group from file /etc/freeradius/sites-enabled/default
(0)   Challenge { ... } # empty sub-section is ignored
(0) session-state: Saving cached attributes
(0)   Framed-MTU = 994
(0) Sent Access-Challenge Id 225 from 10.0.0.5:1812 to
185.241.224.187:35356 length 64
(0)   EAP-Message = 0x010200060d20
(0)   Message-Authenticator = 0x00000000000000000000000000000000
(0)   State = 0xa960c76da962ca67c033c547c41b2362
(0) Finished request
Waking up in 29.9 seconds.
 ... new connection request on TCP socket
Ignoring new connection due to client max_connections (16)
Waking up in 25.3 seconds.
(1) Received Access-Request Id 226 from 185.241.224.187:35356 to
10.0.0.5:1812 length 436
(1)   NAS-IP-Address = 192.168.1.112
(1)   NAS-Port-Type = Ethernet
(1)   NAS-Port = 4
(1)   User-Name = "host/353ec014-5c70-4e4c-a7c8-b9c8b5860352"
(1)   Acct-Session-Id = "0500003F"
(1)   State = 0xa960c76da962ca67c033c547c41b2362
(1)   Called-Station-Id = "A4-B2-39-CD-FE-3F"
(1)   Calling-Station-Id = "28-00-AF-0F-A8-32"
(1)   EAP-Message =
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
(1)   Message-Authenticator = 0xcc559b3212a95756ea6a742fc1963909
(1) Restoring &session-state
(1)   &session-state:Framed-MTU = 994
(1) # Executing section authorize from file
/etc/freeradius/sites-enabled/default
(1)   authorize {
(1)     policy filter_username {
(1)       if (&User-Name) {
(1)       if (&User-Name)  -> TRUE
(1)       if (&User-Name)  {
(1)         if (&User-Name =~ / /) {
(1)         if (&User-Name =~ / /)  -> FALSE
(1)         if (&User-Name =~ /@[^@]*@/ ) {
(1)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(1)         if (&User-Name =~ /\.\./ ) {
(1)         if (&User-Name =~ /\.\./ )  -> FALSE
(1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
  -> FALSE
(1)         if (&User-Name =~ /\.$/)  {
(1)         if (&User-Name =~ /\.$/)   -> FALSE
(1)         if (&User-Name =~ /@\./)  {
(1)         if (&User-Name =~ /@\./)   -> FALSE
(1)       } # if (&User-Name)  = notfound
(1)     } # policy filter_username = notfound
(1)     [preprocess] = ok
(1)     [chap] = noop
(1)     [mschap] = noop
(1)     [digest] = noop
(1) suffix: Checking for suffix after "@"
(1) suffix: No '@' in User-Name =
"host/353ec014-5c70-4e4c-a7c8-b9c8b5860352", looking up realm NULL
(1) suffix: No such realm "NULL"
(1)     [suffix] = noop
(1) eap: Peer sent EAP Response (code 2) ID 2 length 267
(1) eap: No EAP Start, assuming it's an on-going EAP conversation
(1)     [eap] = updated
(1)     [files] = noop
(1)     [expiration] = noop
(1)     [logintime] = noop
(1)     [pap] = noop
(1)   } # authorize = updated
(1) Found Auth-Type = eap
(1) # Executing group from file /etc/freeradius/sites-enabled/default
(1)   authenticate {
(1) eap: Removing EAP session with state 0xa960c76da962ca67
(1) eap: Previous EAP request found for state 0xa960c76da962ca67,
released from the list
(1) eap: Peer sent packet with method EAP TLS (13)
(1) eap: Calling submodule eap_tls to process data
(1) eap_tls: (TLS) EAP Peer says that the final record size will be 257 bytes
(1) eap_tls: (TLS) EAP Got all data (257 bytes)
(1) eap_tls: (TLS) TLS - Handshake state - before SSL initialization
(1) eap_tls: (TLS) TLS - Handshake state - Server before SSL initialization
(1) eap_tls: (TLS) TLS - Handshake state - Server before SSL initialization
(1) eap_tls: (TLS) TLS - recv TLS 1.3 Handshake, ClientHello
(1) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS read client hello
(1) eap_tls: (TLS) TLS - send TLS 1.3 Handshake, ServerHello
(1) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS write server hello
(1) eap_tls: (TLS) TLS - send TLS 1.3 ChangeCipherSpec
(1) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS write
change cipher spec
(1) eap_tls: (TLS) TLS - send TLS 1.3 Handshake, EncryptedExtensions
(1) eap_tls: (TLS) TLS - Handshake state - Server TLSv1.3 write
encrypted extensions
(1) eap_tls: (TLS) TLS - send TLS 1.3 Handshake, CertificateRequest
(1) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS write
certificate request
(1) eap_tls: (TLS) TLS - send TLS 1.3 Handshake, Certificate
(1) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS write certificate
(1) eap_tls: (TLS) TLS - send TLS 1.3 Handshake, CertificateVerify
(1) eap_tls: (TLS) TLS - Handshake state - Server TLSv1.3 write server
certificate verify
(1) eap_tls: (TLS) TLS - send TLS 1.3 Handshake, Finished
(1) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS write finished
(1) eap_tls: (TLS) TLS - Handshake state - Server TLSv1.3 early data
(1) eap_tls: (TLS) TLS - Server : Need to read more data: TLSv1.3 early data
(1) eap_tls: (TLS) TLS - In Handshake Phase
(1) eap: Sending EAP Request (code 1) ID 3 length 1000
(1) eap: EAP session adding &reply:State = 0xa960c76da863ca67
(1)     [eap] = handled
(1)   } # authenticate = handled
(1) Using Post-Auth-Type Challenge
(1) # Executing group from file /etc/freeradius/sites-enabled/default
(1)   Challenge { ... } # empty sub-section is ignored
(1) session-state: Saving cached attributes
(1)   Framed-MTU = 994
(1)   TLS-Session-Information = "(TLS) TLS - recv TLS 1.3 Handshake,
ClientHello"
(1)   TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
ServerHello"
(1)   TLS-Session-Information = "(TLS) TLS - send TLS 1.3 ChangeCipherSpec"
(1)   TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
EncryptedExtensions"
(1)   TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
CertificateRequest"
(1)   TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
Certificate"
(1)   TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
CertificateVerify"
(1)   TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake, Finished"
(1) Sent Access-Challenge Id 226 from 10.0.0.5:1812 to
185.241.224.187:35356 length 1064
(1)   EAP-Message =
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
(1)   Message-Authenticator = 0x00000000000000000000000000000000
(1)   State = 0xa960c76da863ca67c033c547c41b2362
(1) Finished request
Waking up in 20.9 seconds.
 ... new connection request on TCP socket
Ignoring new connection due to client max_connections (16)
Waking up in 20.3 seconds.
 ... new connection request on TCP socket
Ignoring new connection due to client max_connections (16)
Waking up in 15.3 seconds.
(2) Received Access-Request Id 227 from 185.241.224.187:35356 to
10.0.0.5:1812 length 173
(2)   NAS-IP-Address = 192.168.1.112
(2)   NAS-Port-Type = Ethernet
(2)   NAS-Port = 4
(2)   User-Name = "host/353ec014-5c70-4e4c-a7c8-b9c8b5860352"
(2)   Acct-Session-Id = "0500003F"
(2)   State = 0xa960c76da863ca67c033c547c41b2362
(2)   Called-Station-Id = "A4-B2-39-CD-FE-3F"
(2)   Calling-Station-Id = "28-00-AF-0F-A8-32"
(2)   EAP-Message = 0x020300060d00
(2)   Message-Authenticator = 0xbf0af695bb5ac349944293a07a61472c
(2) Restoring &session-state
(2)   &session-state:Framed-MTU = 994
(2)   &session-state:TLS-Session-Information = "(TLS) TLS - recv TLS
1.3 Handshake, ClientHello"
(2)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.3 Handshake, ServerHello"
(2)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.3 ChangeCipherSpec"
(2)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.3 Handshake, EncryptedExtensions"
(2)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.3 Handshake, CertificateRequest"
(2)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.3 Handshake, Certificate"
(2)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.3 Handshake, CertificateVerify"
(2)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.3 Handshake, Finished"
(2) # Executing section authorize from file
/etc/freeradius/sites-enabled/default
(2)   authorize {
(2)     policy filter_username {
(2)       if (&User-Name) {
(2)       if (&User-Name)  -> TRUE
(2)       if (&User-Name)  {
(2)         if (&User-Name =~ / /) {
(2)         if (&User-Name =~ / /)  -> FALSE
(2)         if (&User-Name =~ /@[^@]*@/ ) {
(2)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(2)         if (&User-Name =~ /\.\./ ) {
(2)         if (&User-Name =~ /\.\./ )  -> FALSE
(2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
  -> FALSE
(2)         if (&User-Name =~ /\.$/)  {
(2)         if (&User-Name =~ /\.$/)   -> FALSE
(2)         if (&User-Name =~ /@\./)  {
(2)         if (&User-Name =~ /@\./)   -> FALSE
(2)       } # if (&User-Name)  = notfound
(2)     } # policy filter_username = notfound
(2)     [preprocess] = ok
(2)     [chap] = noop
(2)     [mschap] = noop
(2)     [digest] = noop
(2) suffix: Checking for suffix after "@"
(2) suffix: No '@' in User-Name =
"host/353ec014-5c70-4e4c-a7c8-b9c8b5860352", looking up realm NULL
(2) suffix: No such realm "NULL"
(2)     [suffix] = noop
(2) eap: Peer sent EAP Response (code 2) ID 3 length 6
(2) eap: No EAP Start, assuming it's an on-going EAP conversation
(2)     [eap] = updated
(2)     [files] = noop
(2)     [expiration] = noop
(2)     [logintime] = noop
(2)     [pap] = noop
(2)   } # authorize = updated
(2) Found Auth-Type = eap
(2) # Executing group from file /etc/freeradius/sites-enabled/default
(2)   authenticate {
(2) eap: Removing EAP session with state 0xa960c76da863ca67
(2) eap: Previous EAP request found for state 0xa960c76da863ca67,
released from the list
(2) eap: Peer sent packet with method EAP TLS (13)
(2) eap: Calling submodule eap_tls to process data
(2) eap_tls: (TLS) Peer ACKed our handshake fragment
(2) eap: Sending EAP Request (code 1) ID 4 length 1000
(2) eap: EAP session adding &reply:State = 0xa960c76dab64ca67
(2)     [eap] = handled
(2)   } # authenticate = handled
(2) Using Post-Auth-Type Challenge
(2) # Executing group from file /etc/freeradius/sites-enabled/default
(2)   Challenge { ... } # empty sub-section is ignored
(2) session-state: Saving cached attributes
(2)   Framed-MTU = 994
(2)   TLS-Session-Information = "(TLS) TLS - recv TLS 1.3 Handshake,
ClientHello"
(2)   TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
ServerHello"
(2)   TLS-Session-Information = "(TLS) TLS - send TLS 1.3 ChangeCipherSpec"
(2)   TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
EncryptedExtensions"
(2)   TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
CertificateRequest"
(2)   TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
Certificate"
(2)   TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
CertificateVerify"
(2)   TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake, Finished"
(2) Sent Access-Challenge Id 227 from 10.0.0.5:1812 to
185.241.224.187:35356 length 1064
(2)   EAP-Message =
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
(2)   Message-Authenticator = 0x00000000000000000000000000000000
(2)   State = 0xa960c76dab64ca67c033c547c41b2362
(2) Finished request
Waking up in 11.8 seconds.
 ... new connection request on TCP socket
Ignoring new connection due to client max_connections (16)
Waking up in 10.3 seconds.
 ... new connection request on TCP socket
Ignoring new connection due to client max_connections (16)
Waking up in 5.3 seconds.
(3) Received Access-Request Id 228 from 185.241.224.187:35356 to
10.0.0.5:1812 length 173
(3)   NAS-IP-Address = 192.168.1.112
(3)   NAS-Port-Type = Ethernet
(3)   NAS-Port = 4
(3)   User-Name = "host/353ec014-5c70-4e4c-a7c8-b9c8b5860352"
(3)   Acct-Session-Id = "0500003F"
(3)   State = 0xa960c76dab64ca67c033c547c41b2362
(3)   Called-Station-Id = "A4-B2-39-CD-FE-3F"
(3)   Calling-Station-Id = "28-00-AF-0F-A8-32"
(3)   EAP-Message = 0x020400060d00
(3)   Message-Authenticator = 0x038ead73ce4c8b0a455b6b5ffea2c726
(3) Restoring &session-state
(3)   &session-state:Framed-MTU = 994
(3)   &session-state:TLS-Session-Information = "(TLS) TLS - recv TLS
1.3 Handshake, ClientHello"
(3)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.3 Handshake, ServerHello"
(3)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.3 ChangeCipherSpec"
(3)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.3 Handshake, EncryptedExtensions"
(3)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.3 Handshake, CertificateRequest"
(3)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.3 Handshake, Certificate"
(3)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.3 Handshake, CertificateVerify"
(3)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.3 Handshake, Finished"
(3) # Executing section authorize from file
/etc/freeradius/sites-enabled/default
(3)   authorize {
(3)     policy filter_username {
(3)       if (&User-Name) {
(3)       if (&User-Name)  -> TRUE
(3)       if (&User-Name)  {
(3)         if (&User-Name =~ / /) {
(3)         if (&User-Name =~ / /)  -> FALSE
(3)         if (&User-Name =~ /@[^@]*@/ ) {
(3)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(3)         if (&User-Name =~ /\.\./ ) {
(3)         if (&User-Name =~ /\.\./ )  -> FALSE
(3)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(3)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
  -> FALSE
(3)         if (&User-Name =~ /\.$/)  {
(3)         if (&User-Name =~ /\.$/)   -> FALSE
(3)         if (&User-Name =~ /@\./)  {
(3)         if (&User-Name =~ /@\./)   -> FALSE
(3)       } # if (&User-Name)  = notfound
(3)     } # policy filter_username = notfound
(3)     [preprocess] = ok
(3)     [chap] = noop
(3)     [mschap] = noop
(3)     [digest] = noop
(3) suffix: Checking for suffix after "@"
(3) suffix: No '@' in User-Name =
"host/353ec014-5c70-4e4c-a7c8-b9c8b5860352", looking up realm NULL
(3) suffix: No such realm "NULL"
(3)     [suffix] = noop
(3) eap: Peer sent EAP Response (code 2) ID 4 length 6
(3) eap: No EAP Start, assuming it's an on-going EAP conversation
(3)     [eap] = updated
(3)     [files] = noop
(3)     [expiration] = noop
(3)     [logintime] = noop
(3)     [pap] = noop
(3)   } # authorize = updated
(3) Found Auth-Type = eap
(3) # Executing group from file /etc/freeradius/sites-enabled/default
(3)   authenticate {
(3) eap: Removing EAP session with state 0xa960c76dab64ca67
(3) eap: Previous EAP request found for state 0xa960c76dab64ca67,
released from the list
(3) eap: Peer sent packet with method EAP TLS (13)
(3) eap: Calling submodule eap_tls to process data
(3) eap_tls: (TLS) Peer ACKed our handshake fragment
(3) eap: Sending EAP Request (code 1) ID 5 length 1000
(3) eap: EAP session adding &reply:State = 0xa960c76daa65ca67
(3)     [eap] = handled
(3)   } # authenticate = handled
(3) Using Post-Auth-Type Challenge
(3) # Executing group from file /etc/freeradius/sites-enabled/default
(3)   Challenge { ... } # empty sub-section is ignored
(3) session-state: Saving cached attributes
(3)   Framed-MTU = 994
(3)   TLS-Session-Information = "(TLS) TLS - recv TLS 1.3 Handshake,
ClientHello"
(3)   TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
ServerHello"
(3)   TLS-Session-Information = "(TLS) TLS - send TLS 1.3 ChangeCipherSpec"
(3)   TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
EncryptedExtensions"
(3)   TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
CertificateRequest"
(3)   TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
Certificate"
(3)   TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
CertificateVerify"
(3)   TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake, Finished"
(3) Sent Access-Challenge Id 228 from 10.0.0.5:1812 to
185.241.224.187:35356 length 1064
(3)   EAP-Message =
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
(3)   Message-Authenticator = 0x00000000000000000000000000000000
(3)   State = 0xa960c76daa65ca67c033c547c41b2362
(3) Finished request
Waking up in 2.8 seconds.
 ... new connection request on TCP socket
Ignoring new connection due to client max_connections (16)
Waking up in 0.2 seconds.
(0) Cleaning up request packet ID 225 with timestamp +1392 due to
cleanup_delay was reached
Waking up in 9.0 seconds.
 ... new connection request on TCP socket
Ignoring new connection due to client max_connections (16)
Waking up in 4.3 seconds.
(4) Received Access-Request Id 229 from 185.241.224.187:35356 to
10.0.0.5:1812 length 173
(4)   NAS-IP-Address = 192.168.1.112
(4)   NAS-Port-Type = Ethernet
(4)   NAS-Port = 4
(4)   User-Name = "host/353ec014-5c70-4e4c-a7c8-b9c8b5860352"
(4)   Acct-Session-Id = "0500003F"
(4)   State = 0xa960c76daa65ca67c033c547c41b2362
(4)   Called-Station-Id = "A4-B2-39-CD-FE-3F"
(4)   Calling-Station-Id = "28-00-AF-0F-A8-32"
(4)   EAP-Message = 0x020500060d00
(4)   Message-Authenticator = 0xd41b050c3a3def192db05fd631f14607
(4) Restoring &session-state
(4)   &session-state:Framed-MTU = 994
(4)   &session-state:TLS-Session-Information = "(TLS) TLS - recv TLS
1.3 Handshake, ClientHello"
(4)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.3 Handshake, ServerHello"
(4)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.3 ChangeCipherSpec"
(4)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.3 Handshake, EncryptedExtensions"
(4)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.3 Handshake, CertificateRequest"
(4)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.3 Handshake, Certificate"
(4)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.3 Handshake, CertificateVerify"
(4)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.3 Handshake, Finished"
(4) # Executing section authorize from file
/etc/freeradius/sites-enabled/default
(4)   authorize {
(4)     policy filter_username {
(4)       if (&User-Name) {
(4)       if (&User-Name)  -> TRUE
(4)       if (&User-Name)  {
(4)         if (&User-Name =~ / /) {
(4)         if (&User-Name =~ / /)  -> FALSE
(4)         if (&User-Name =~ /@[^@]*@/ ) {
(4)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(4)         if (&User-Name =~ /\.\./ ) {
(4)         if (&User-Name =~ /\.\./ )  -> FALSE
(4)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(4)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
  -> FALSE
(4)         if (&User-Name =~ /\.$/)  {
(4)         if (&User-Name =~ /\.$/)   -> FALSE
(4)         if (&User-Name =~ /@\./)  {
(4)         if (&User-Name =~ /@\./)   -> FALSE
(4)       } # if (&User-Name)  = notfound
(4)     } # policy filter_username = notfound
(4)     [preprocess] = ok
(4)     [chap] = noop
(4)     [mschap] = noop
(4)     [digest] = noop
(4) suffix: Checking for suffix after "@"
(4) suffix: No '@' in User-Name =
"host/353ec014-5c70-4e4c-a7c8-b9c8b5860352", looking up realm NULL
(4) suffix: No such realm "NULL"
(4)     [suffix] = noop
(4) eap: Peer sent EAP Response (code 2) ID 5 length 6
(4) eap: No EAP Start, assuming it's an on-going EAP conversation
(4)     [eap] = updated
(4)     [files] = noop
(4)     [expiration] = noop
(4)     [logintime] = noop
(4)     [pap] = noop
(4)   } # authorize = updated
(4) Found Auth-Type = eap
(4) # Executing group from file /etc/freeradius/sites-enabled/default
(4)   authenticate {
(4) eap: Removing EAP session with state 0xa960c76daa65ca67
(4) eap: Previous EAP request found for state 0xa960c76daa65ca67,
released from the list
(4) eap: Peer sent packet with method EAP TLS (13)
(4) eap: Calling submodule eap_tls to process data
(4) eap_tls: (TLS) Peer ACKed our handshake fragment
(4) eap: Sending EAP Request (code 1) ID 6 length 1000
(4) eap: EAP session adding &reply:State = 0xa960c76dad66ca67
(4)     [eap] = handled
(4)   } # authenticate = handled
(4) Using Post-Auth-Type Challenge
(4) # Executing group from file /etc/freeradius/sites-enabled/default
(4)   Challenge { ... } # empty sub-section is ignored
(4) session-state: Saving cached attributes
(4)   Framed-MTU = 994
(4)   TLS-Session-Information = "(TLS) TLS - recv TLS 1.3 Handshake,
ClientHello"
(4)   TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
ServerHello"
(4)   TLS-Session-Information = "(TLS) TLS - send TLS 1.3 ChangeCipherSpec"
(4)   TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
EncryptedExtensions"
(4)   TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
CertificateRequest"
(4)   TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
Certificate"
(4)   TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
CertificateVerify"
(4)   TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake, Finished"
(4) Sent Access-Challenge Id 229 from 10.0.0.5:1812 to
185.241.224.187:35356 length 1064
(4)   EAP-Message =
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
(4)   Message-Authenticator = 0x00000000000000000000000000000000
(4)   State = 0xa960c76dad66ca67c033c547c41b2362
(4) Finished request
Waking up in 2.8 seconds.
(1) Cleaning up request packet ID 226 with timestamp +1401 due to
cleanup_delay was reached
Waking up in 9.0 seconds.
 ... new connection request on TCP socket
Ignoring new connection due to client max_connections (16)
Waking up in 8.3 seconds.
 ... new connection request on TCP socket
Ignoring new connection due to client max_connections (16)
Waking up in 3.3 seconds.
(5) Received Access-Request Id 230 from 185.241.224.187:35356 to
10.0.0.5:1812 length 173
(5)   NAS-IP-Address = 192.168.1.112
(5)   NAS-Port-Type = Ethernet
(5)   NAS-Port = 4
(5)   User-Name = "host/353ec014-5c70-4e4c-a7c8-b9c8b5860352"
(5)   Acct-Session-Id = "0500003F"
(5)   State = 0xa960c76dad66ca67c033c547c41b2362
(5)   Called-Station-Id = "A4-B2-39-CD-FE-3F"
(5)   Calling-Station-Id = "28-00-AF-0F-A8-32"
(5)   EAP-Message = 0x020600060d00
(5)   Message-Authenticator = 0x0dc4ca0033f30b31ea12f0a84c3615c3
(5) Restoring &session-state
(5)   &session-state:Framed-MTU = 994
(5)   &session-state:TLS-Session-Information = "(TLS) TLS - recv TLS
1.3 Handshake, ClientHello"
(5)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.3 Handshake, ServerHello"
(5)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.3 ChangeCipherSpec"
(5)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.3 Handshake, EncryptedExtensions"
(5)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.3 Handshake, CertificateRequest"
(5)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.3 Handshake, Certificate"
(5)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.3 Handshake, CertificateVerify"
(5)   &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
1.3 Handshake, Finished"
(5) # Executing section authorize from file
/etc/freeradius/sites-enabled/default
(5)   authorize {
(5)     policy filter_username {
(5)       if (&User-Name) {
(5)       if (&User-Name)  -> TRUE
(5)       if (&User-Name)  {
(5)         if (&User-Name =~ / /) {
(5)         if (&User-Name =~ / /)  -> FALSE
(5)         if (&User-Name =~ /@[^@]*@/ ) {
(5)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(5)         if (&User-Name =~ /\.\./ ) {
(5)         if (&User-Name =~ /\.\./ )  -> FALSE
(5)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(5)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
  -> FALSE
(5)         if (&User-Name =~ /\.$/)  {
(5)         if (&User-Name =~ /\.$/)   -> FALSE
(5)         if (&User-Name =~ /@\./)  {
(5)         if (&User-Name =~ /@\./)   -> FALSE
(5)       } # if (&User-Name)  = notfound
(5)     } # policy filter_username = notfound
(5)     [preprocess] = ok
(5)     [chap] = noop
(5)     [mschap] = noop
(5)     [digest] = noop
(5) suffix: Checking for suffix after "@"
(5) suffix: No '@' in User-Name =
"host/353ec014-5c70-4e4c-a7c8-b9c8b5860352", looking up realm NULL
(5) suffix: No such realm "NULL"
(5)     [suffix] = noop
(5) eap: Peer sent EAP Response (code 2) ID 6 length 6
(5) eap: No EAP Start, assuming it's an on-going EAP conversation
(5)     [eap] = updated
(5)     [files] = noop
(5)     [expiration] = noop
(5)     [logintime] = noop
(5)     [pap] = noop
(5)   } # authorize = updated
(5) Found Auth-Type = eap
(5) # Executing group from file /etc/freeradius/sites-enabled/default
(5)   authenticate {
(5) eap: Removing EAP session with state 0xa960c76dad66ca67
(5) eap: Previous EAP request found for state 0xa960c76dad66ca67,
released from the list
(5) eap: Peer sent packet with method EAP TLS (13)
(5) eap: Calling submodule eap_tls to process data
(5) eap_tls: (TLS) Peer ACKed our handshake fragment
(5) eap: Sending EAP Request (code 1) ID 7 length 109
(5) eap: EAP session adding &reply:State = 0xa960c76dac67ca67
(5)     [eap] = handled
(5)   } # authenticate = handled
(5) Using Post-Auth-Type Challenge
(5) # Executing group from file /etc/freeradius/sites-enabled/default
(5)   Challenge { ... } # empty sub-section is ignored
(5) session-state: Saving cached attributes
(5)   Framed-MTU = 994
(5)   TLS-Session-Information = "(TLS) TLS - recv TLS 1.3 Handshake,
ClientHello"
(5)   TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
ServerHello"
(5)   TLS-Session-Information = "(TLS) TLS - send TLS 1.3 ChangeCipherSpec"
(5)   TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
EncryptedExtensions"
(5)   TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
CertificateRequest"
(5)   TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
Certificate"
(5)   TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
CertificateVerify"
(5)   TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake, Finished"
(5) Sent Access-Challenge Id 230 from 10.0.0.5:1812 to
185.241.224.187:35356 length 167
(5)   EAP-Message =
0x0107006d0d8000000fdbe33d32c6d71228255ebeafdd018899878a8fe0a80f886c4eb5170303004513e76f1ad52ae44957d10ac939c3d9a463013e536725fa716af274ae1ca18448ac2820e8abb26835729ebf1a1e0cca06c6553bba22f0249caa9e90802e54b60b89891323cb
(5)   Message-Authenticator = 0x00000000000000000000000000000000
(5)   State = 0xa960c76dac67ca67c033c547c41b2362
(5) Finished request
Waking up in 2.9 seconds.
(2) Cleaning up request packet ID 227 with timestamp +1410 due to
cleanup_delay was reached
Ready to process requests
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

Re: Timeout and TLS handshake

George Benjin