Hi, thats the dubug output from the procurve: 0000:00:14:48.40 IP mIpAdMCtrl:IPM_NBR_STALE_ALARM: [ 13 reps ] 0000:00:14:49.33 IP mIpAdMCtrl:IPS_AGE_TIMER: 0000:00:14:50.21 LLDP mlldpCtrl: lldp refresh pkt sent out port : 9 0000:00:14:51.10 SNMP mSnmpEvt:Received SNMP_COLDSTART_TIMER_indic message 0000:00:15:11.10 SNMP mSnmpEvt:Received SNMP_COLDSTART_TIMER_indic message 0000:00:15:15.35 LLDP mlldpCtrl: lldp pkt received on port : 9 0000:00:15:15.35 LLDP mlldpCtrl: refresh frame on port : 9. Updating neighbor data ... 0000:00:15:15.35 LLDP mlldpCtrl: lldp : no more MED neighbors 0000:00:15:15.47 IP mIpPktRecv:s=client_IP_jonas(switch_vlan) d=procurve_switch_ip recv 0000:00:15:15.47 IP mIpPktRecv:s=procurve_switch_ip d=client_IP_jonas(switch_vlan) g=192.168.6.254 xmit 0000:00:15:15.48 IP mIpPktRecv:s=client_IP_jonas(switch_vlan) d=procurve_switch_ip recv 0000:00:15:15.48 IP InetServer:s=procurve_switch_ip d=client_IP_jonas(switch_vlan) g=192.168.6.254 xmit 0000:00:15:15.48 IP mIpPktRecv:s=client_IP_jonas(switch_vlan) d=procurve_switch_ip recv 0000:00:15:15.48 IP mIpPktRecv:s=client_IP_jonas(switch_vlan) d=procurve_switch_ip recv 0000:00:15:15.48 IP mIpPktRecv:s=procurve_switch_ip d=client_IP_jonas(switch_vlan) g=192.168.6.254 xmit 0000:00:15:15.53 IP mIpPktRecv:s=client_IP_jonas(switch_vlan) d=procurve_switch_ip recv 0000:00:15:15.73 IP InetServer:s=procurve_switch_ip d=client_IP_jonas(switch_vlan) g=192.168.6.254 xmit 0000:00:15:16.19 IP InetServer:s=procurve_switch_ip d=client_IP_jonas(switch_vlan) g=192.168.6.254 xmit 0000:00:15:16.24 IP mIpPktRecv:s=client_IP_jonas(switch_vlan) d=procurve_switch_ip recv 0000:00:15:16.24 IP mIpPktRecv:s=procurve_switch_ip d=client_IP_jonas(switch_vlan) g=192.168.6.254 xmit 0000:00:15:16.24 IP mIpPktRecv:s=client_IP_jonas(switch_vlan) d=procurve_switch_ip recv 0000:00:15:16.24 IP InetServer:s=procurve_switch_ip d=client_IP_jonas(switch_vlan) g=192.168.6.254 xmit 0000:00:15:16.29 IP mIpPktRecv:s=client_IP_jonas(switch_vlan) d=procurve_switch_ip recv 0000:00:15:18.01 IP mIpPktRecv:s=client_IP_jonas(switch_vlan) d=procurve_switch_ip recv 0000:00:15:18.01 LOGA tSsh0:user_login_lookup: name='test' addr=client_IP_jonas priv=noauth status=SUCCESS 0000:00:15:18.01 IP InetServer:s=procurve_switch_ip d=client_IP_jonas(switch_vlan) g=192.168.6.254 xmit 0000:00:15:18.06 IP mIpPktRecv:s=client_IP_jonas(switch_vlan) d=procurve_switch_ip recv 0000:00:15:19.59 IP mIpPktRecv:s=client_IP_jonas(switch_vlan) d=procurve_switch_ip recv 0000:00:15:19.60 RAD mRadiusCtrl:Received RADIUS MSG: AUTH REQUEST, session: 7, access method: SSH. 0000:00:15:19.60 LOGA mSshAlrm:user_login_lookup: name='test' addr=client_IP_jonas priv=noauth status=SUCCESS 0000:00:15:19.60 RAD mRadiusCtrl:Received RADIUS MSG: DATA, session: 7. 0000:00:15:19.60 RAD mRadiusCtrl:Received RADIUS MSG: DATA, session: 7. 0000:00:15:19.60 IP InetServer:s=procurve_switch_ip d=radius_server_ip(switch_vlan) g=192.168.6.254 xmit 0000:00:15:19.60 RAD mRadiusCtrl:ACCESS REQUEST id: 18 to radius_server_ip session: 7, access method: SSH, User-Name: test, Calling-Station-Id: client_IP_jonas, NAS-IP-Address: 211.6.168.192. 0000:00:15:19.60 IP mIpPktRecv:s=radius_server_ip(switch_vlan) d=procurve_switch_ip recv 0000:00:15:19.60 RAD tRadiusR:ACCESS CHALLENGE id: 18 from radius_server_ip received. 0000:00:15:19.60 IP InetServer:s=procurve_switch_ip d=radius_server_ip(switch_vlan) g=192.168.6.254 xmit 0000:00:15:19.60 RAD tRadiusR:ACCESS REQUEST id: 19 to radius_server_ip session: 7, access method: SSH, User-Name: test, Calling-Station-Id: client_IP_jonas, NAS-IP-Address: 211.6.168.192. 0000:00:15:19.61 IP mIpPktRecv:s=radius_server_ip(switch_vlan) d=procurve_switch_ip recv 0000:00:15:19.61 RAD tRadiusR:ACCESS CHALLENGE id: 19 from radius_server_ip received. 0000:00:15:19.61 IP InetServer:s=procurve_switch_ip d=radius_server_ip(switch_vlan) g=192.168.6.254 xmit 0000:00:15:19.61 RAD tRadiusR:ACCESS REQUEST id: 20 to radius_server_ip session: 7, access method: SSH, User-Name: test, Calling-Station-Id: client_IP_jonas, NAS-IP-Address: 211.6.168.192. 0000:00:15:19.61 IP mIpPktRecv:s=radius_server_ip(switch_vlan) d=procurve_switch_ip recv 0000:00:15:19.61 RAD tRadiusR:ACCESS CHALLENGE id: 20 from radius_server_ip received. 0000:00:15:19.61 IP InetServer:s=procurve_switch_ip d=radius_server_ip(switch_vlan) g=192.168.6.254 xmit 0000:00:15:19.61 RAD tRadiusR:ACCESS REQUEST id: 21 to radius_server_ip session: 7, access method: SSH, User-Name: test, Calling-Station-Id: client_IP_jonas, NAS-IP-Address: 211.6.168.192. 0000:00:15:19.61 IP mIpPktRecv:s=radius_server_ip(switch_vlan) d=procurve_switch_ip recv 0000:00:15:19.61 RAD tRadiusR:ACCESS CHALLENGE id: 21 from radius_server_ip received. 0000:00:15:19.61 IP InetServer:s=procurve_switch_ip d=radius_server_ip(switch_vlan) g=192.168.6.254 xmit 0000:00:15:19.62 RAD tRadiusR:ACCESS REQUEST id: 22 to radius_server_ip session: 7, access method: SSH, User-Name: test, Calling-Station-Id: client_IP_jonas, NAS-IP-Address: 211.6.168.192. 0000:00:15:19.62 RAD tRadiusR:ACCESS CHALLENGE id: 22 from radius_server_ip received. 0000:00:15:19.62 LOGA tRadiusR:user_login_lookup: name='test' addr=client_IP_jonas priv=none status=FAILURE 0000:00:15:19.62 RAD tRadiusR:Removing RADIUS REQUEST id: 22 from queue. 0000:00:15:20.25 LLDP mlldpCtrl: lldp refresh pkt sent out port : 9 0000:00:15:23.13 IP mIpAdMCtrl:IPM_NBR_STALE_ALARM: [ 11 reps ] 0000:00:15:23.30 IP mIpAdMCtrl:IPM_GENMSG: count=1 pending=1 source=local next.msgId=0 0000:00:15:23.30 IP mIpAdMCtrl: IP_ARPADD: flags=0x0 vrf=0 ip=192.168.6.251 ifIndex=207 vlan=2 vid=106 lport=0 mac=000000-000000 &pkt=0 &hcEntry=0 0000:00:15:23.30 IP mIpAdMCtrl:IPM_GENMSG: count=1 pending=1 source=local next.msgId=0 0000:00:15:23.30 IP mIpAdMCtrl: IP_ARPUPDATE: flags=0xc icmpType=136 vrf=0 ip=192.168.6.251 ifIndex=207 mac=000496-8fe99f port=9,9 0000:00:15:25.33 IP mIpAdMCtrl:IPS_AGE_TIMER: ** Total debug messages = 74 I see only at line 0000:00:15:19.62 LOGA a failure. I can not do anything with it.. Now i trie a firmware update -----Ursprüngliche Nachricht----- Von: Freeradius-Users [mailto:freeradius-users-bounces+jonas.kiefer=classen.de@lists.freeradius.org] Im Auftrag von A.L.M.Buxey@lboro.ac.uk Gesendet: Montag, 29. Februar 2016 15:26 An: FreeRadius users mailing list <freeradius-users@lists.freeradius.org> Betreff: Re: freeradius 3 + mysql configure Hi,
OK after i set copy_request_to_tunnel = yes & use_tunneled_reply = yes in peap section of the eap config file it works as i imagine with. But with the Procurve switch it stops after the 4th request. But why?
upgrade firmware on the device, turn on debugging on the switch to see what its doing or not liking? alan - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html