Hi, I am trying to send an Access-Request with EAP-Identity response. The Request was successful and Server sent an Access-Challenge in response (MD5 challenge), the response to this challenge is failing (receiving Access-Reject from Server), the Error message was "rlm_eap_md5: User-Password is required for EAP-MD5 authentication". I have the User-Password attribute in Access-Request. Below is the Access-Request packet attributes, -------------------------------------------------------------------------------- User-Name = jrc User-Password = jrc Nas-identifier = jrcnas Nas-Ip-Address = 10.10.10.10 Nas-Port = 20 Nas-Port-Type = 15 CUI = 0 Service-Type = Framed-User Framed-MTU = 1400 Calling-Station-Id = 1:1:1:1:1:1 NSP-Id = nap BS-ID = TestBS EAP-Code = Response EAP-Id = 210 EAP-Type-Identity = "jrc" EAP-MD5-Password = jrc Message-Authenticator = 0x00 -------------------------------------------------------------------------------- am I doing any wrong here? Can Anybody help me how to solve this problem? ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- rad_recv: Access-Request packet from host 127.0.0.1:32825, id=177, length=150 User-Name = "jrc" User-Password = "jrc" NAS-Identifier = "jrcnas" NAS-IP-Address = 10.10.10.10 NAS-Port = 20 NAS-Port-Type = Ethernet CUI = "0" Service-Type = Framed-User Framed-MTU = 1400 Calling-Station-Id = "1:1:1:1:1:1" NSP-ID = "nap" BS-ID = "TestBS" Message-Authenticator = 0x4cc4b9e9f807f7648ddb267ec1365cc6 EAP-Message = 0x02d20008016a7263 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 0 modcall[authorize]: module "preprocess" returns ok for request 0 modcall[authorize]: module "chap" returns noop for request 0 modcall[authorize]: module "mschap" returns noop for request 0 rlm_realm: No '@' in User-Name = "jrc", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 0 rlm_eap: EAP packet type response id 210 length 8 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 0 users: Matched entry jrc at line 231 modcall[authorize]: module "files" returns ok for request 0 modcall: leaving group authorize (returns updated) for request 0 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 0 rlm_eap: EAP Identity rlm_eap: processing type md5 rlm_eap_md5: Issuing Challenge modcall[authenticate]: module "eap" returns handled for request 0 modcall: leaving group authenticate (returns handled) for request 0 Sending Access-Challenge of id 177 to 127.0.0.1 port 32825 CUI = "TestCUI2" Service-Type = Framed-User Framed-Protocol = PPP Framed-IP-Address = 172.31.128.112 Framed-IP-Netmask = 255.255.255.0 Framed-MTU = 1400 AAA-Session-Id = "MultiSessionId2" MSK = "TestMSK2" HA-IP-MIP4 = 1.2.3.5 DHCPv4-Server = 5.6.7.9 MN-HA-MIP4-KEY = "TestMIPKey2" MN-HA-MIP4-SPI = "TestMIPSPI2" DHCP-RK = "TestDHCPRK2" DHCP-RK-KEY-ID = "TestDHCPRKID2" DHCP-RK_LIFETIME = 30 EAP-Message = 0x01d300160410f492fb48923219d8c9760b271cf4e031 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x467be2cc5938e30e368d1633e8ebd4fd Finished request 0 Going to the next request --- Walking the entire request list --- Waking up in 6 seconds... rad_recv: Access-Request packet from host 127.0.0.1:32825, id=178, length=182 User-Name = "jrc" User-Password = "jrc" NAS-Identifier = "jrcnas" NAS-IP-Address = 10.10.10.10 NAS-Port = 20 NAS-Port-Type = Ethernet CUI = "0" Service-Type = Framed-User Framed-MTU = 1400 Calling-Station-Id = "1:1:1:1:1:1" NSP-ID = "nap" BS-ID = "TestBS" Message-Authenticator = 0x7c3e1b2a25d10ce176811099e6ea64a3 State = 0x467be2cc5938e30e368d1633e8ebd4fd EAP-Message = 0x02d300160410d879a36a071bbf8d1111a598184dbe22 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 1 modcall[authorize]: module "preprocess" returns ok for request 1 modcall[authorize]: module "chap" returns noop for request 1 modcall[authorize]: module "mschap" returns noop for request 1 rlm_realm: No '@' in User-Name = "jrc", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 1 rlm_eap: EAP packet type response id 211 length 22 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 1 users: Matched entry jrc at line 231 modcall[authorize]: module "files" returns ok for request 1 modcall: leaving group authorize (returns updated) for request 1 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 1 rlm_eap: Request found, released from the list rlm_eap: EAP/md5 rlm_eap: processing type md5 rlm_eap_md5: User-Password is required for EAP-MD5 authentication rlm_eap: Handler failed in EAP/md5 rlm_eap: Failed in EAP select modcall[authenticate]: module "eap" returns invalid for request 1 modcall: leaving group authenticate (returns invalid) for request 1 auth: Failed to validate the user. Login incorrect: [jrc] (from client localhost port 20 cli 1:1:1:1:1:1) Delaying request 1 for 1 seconds Finished request 1 Going to the next request Waking up in 6 seconds... rad_recv: Access-Request packet from host 127.0.0.1:32825, id=178, length=182 Sending Access-Reject of id 178 to 127.0.0.1 port 32825 EAP-Message = 0x04d30004 Message-Authenticator = 0x00000000000000000000000000000000 --- Walking the entire request list --- Waking up in 3 seconds... ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- -- With Regards, Govardhana K N