hello, this is my client side output: Authentication with 00:03:7f:09:60:a0 timed out. Added BSSID 00:03:7f:09:60:a0 into blacklist State: ASSOCIATED -> DISCONNECTED wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT) WEXT: Operstate: linkmode=-1, operstate=5 wpa_driver_wext_disassociate No keys have been configured - skip key clearing EAPOL: External notification - portEnabled=0 EAPOL: SUPP_PAE entering state DISCONNECTED EAPOL: SUPP_BE entering state INITIALIZE EAP: EAP entering state DISABLED EAPOL: External notification - portValid=0 Setting scan request: 0 sec 0 usec State: DISCONNECTED -> SCANNING Starting AP scan (specific SSID) Scan SSID - hexdump_ascii(len=6): 41 54 48 31 38 32 ATH182 RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) Wireless event: cmd=0x8b15 len=20 Wireless event: new AP: 00:00:00:00:00:00 BSSID 00:03:7f:09:60:a0 blacklist count incremented to 2 CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0 wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0 wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0 wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0 wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0 State: SCANNING -> DISCONNECTED wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT) WEXT: Operstate: linkmode=-1, operstate=5 EAPOL: External notification - portEnabled=0 EAPOL: External notification - portValid=0 RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'ath0' added RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) Wireless event: cmd=0x8b19 len=8 Received 1844 bytes of scan results (7 BSSes) Scan results: 7 Selecting BSS from priority group 0 0: 00:03:7f:09:60:7e ssid='ATH183' wpa_ie_len=0 rsn_ie_len=22 caps=0x11 skip - SSID mismatch 1: 00:03:7f:09:60:a0 ssid='ATH182' wpa_ie_len=0 rsn_ie_len=26 caps=0x11 skip - blacklisted 2: 00:18:0a:01:0f:31 ssid='AUKBC_MESH' wpa_ie_len=0 rsn_ie_len=0 caps=0x1 skip - no WPA/RSN IE 3: 00:a0:f8:ce:7d:18 ssid='symbol3' wpa_ie_len=0 rsn_ie_len=0 caps=0x1 skip - no WPA/RSN IE 4: 00:03:7f:09:60:15 ssid='AUKBC4' wpa_ie_len=0 rsn_ie_len=0 caps=0x1 skip - no WPA/RSN IE 5: 00:18:0a:01:03:fe ssid='AUKBC_MESH' wpa_ie_len=0 rsn_ie_len=0 caps=0x1 skip - no WPA/RSN IE 6: 00:18:0a:01:07:34 ssid='AUKBC_MESH' wpa_ie_len=0 rsn_ie_len=0 caps=0x1 skip - no WPA/RSN IE No APs found - clear blacklist and try again Removed BSSID 00:03:7f:09:60:a0 from blacklist (clear) Selecting BSS from priority group 0 0: 00:03:7f:09:60:7e ssid='ATH183' wpa_ie_len=0 rsn_ie_len=22 caps=0x11 skip - SSID mismatch 1: 00:03:7f:09:60:a0 ssid='ATH182' wpa_ie_len=0 rsn_ie_len=26 caps=0x11 selected based on RSN IE Trying to associate with 00:03:7f:09:60:a0 (SSID='ATH182' freq=2437 MHz) Cancelling scan request WPA: clearing own WPA/RSN IE Automatic auth_alg selection: 0x1 RSN: using IEEE 802.11i/D9.0 WPA: Selected cipher suites: group 8 pairwise 24 key_mgmt 1 proto 2 WPA: clearing AP WPA IE WPA: set AP RSN IE - hexdump(len=26): 30 18 01 00 00 0f ac 02 02 00 00 0f ac 02 00 0f ac 04 01 00 00 0f ac 01 01 00 WPA: using GTK TKIP WPA: using PTK CCMP WPA: using KEY_MGMT 802.1X WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 01 00 00 No keys have been configured - skip key clearing wpa_driver_wext_set_drop_unencrypted State: DISCONNECTED -> ASSOCIATING wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT) WEXT: Operstate: linkmode=-1, operstate=5 wpa_driver_wext_associate Setting authentication timeout: 10 sec 0 usec EAPOL: External notification - portControl=Auto RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) Wireless event: cmd=0x8b06 len=8 RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) Wireless event: cmd=0x8b04 len=12 RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) Wireless event: cmd=0x8b1a len=14 RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP]) Wireless event: cmd=0x8b15 len=20 Wireless event: new AP: 00:03:7f:09:60:a0 State: ASSOCIATING -> ASSOCIATED wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT) WEXT: Operstate: linkmode=-1, operstate=5 Associated to a new BSS: BSSID=00:03:7f:09:60:a0 No keys have been configured - skip key clearing Associated with 00:03:7f:09:60:a0 WPA: Association event - clear replay counter EAPOL: External notification - portEnabled=0 EAPOL: External notification - portValid=0 EAPOL: External notification - portEnabled=1 EAPOL: SUPP_PAE entering state CONNECTING EAPOL: SUPP_BE entering state IDLE EAP: EAP entering state INITIALIZE EAP: deinitialize previously used EAP method (4, MD5) at INITIALIZE EAP: EAP entering state IDLE Setting authentication timeout: 10 sec 0 usec Cancelling scan request RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'ath0' added RX EAPOL from 00:03:7f:09:60:a0 RX EAPOL - hexdump(len=9): 01 00 00 05 01 00 00 05 01 Setting authentication timeout: 70 sec 0 usec EAPOL: Received EAP-Packet frame EAPOL: SUPP_PAE entering state RESTART EAP: EAP entering state INITIALIZE EAP: EAP entering state IDLE EAPOL: SUPP_PAE entering state AUTHENTICATING EAPOL: SUPP_BE entering state REQUEST EAPOL: getSuppRsp EAP: EAP entering state RECEIVED EAP: Received EAP-Request id=0 method=1 vendor=0 vendorMethod=0 EAP: EAP entering state IDENTITY CTRL-EVENT-EAP-STARTED EAP authentication started EAP: EAP-Request Identity data - hexdump_ascii(len=0): EAP: using real identity - hexdump_ascii(len=8): 74 65 73 74 75 73 65 72 testuser EAP: EAP entering state SEND_RESPONSE EAP: EAP entering state IDLE EAPOL: SUPP_BE entering state RESPONSE EAPOL: txSuppRsp TX EAPOL - hexdump(len=17): 01 00 00 0d 02 00 00 0d 01 74 65 73 74 75 73 65 72 EAPOL: SUPP_BE entering state RECEIVE RX EAPOL from 00:03:7f:09:60:a0 RX EAPOL - hexdump(len=26): 01 00 00 16 01 01 00 16 04 10 6d db 12 c2 ff 1f c6 22 64 45 01 07 f9 73 8b 14 EAPOL: Received EAP-Packet frame EAPOL: SUPP_BE entering state REQUEST EAPOL: getSuppRsp EAP: EAP entering state RECEIVED EAP: Received EAP-Request id=1 method=4 vendor=0 vendorMethod=0 EAP: EAP entering state GET_METHOD EAP: Initialize selected EAP method: vendor 0 method 4 (MD5) CTRL-EVENT-EAP-METHOD EAP vendor 0 method 4 (MD5) selected EAP: EAP entering state METHOD EAP-MD5: Challenge - hexdump(len=16): 6d db 12 c2 ff 1f c6 22 64 45 01 07 f9 73 8b 14 EAP-MD5: Generating Challenge Response EAP-MD5: Response - hexdump(len=16): e8 5f fa a3 fe 5d 10 a6 4a 65 11 6d f0 25 19 35 EAP: method process -> ignore=FALSE methodState=DONE decision=UNCOND_SUCC EAP: EAP entering state SEND_RESPONSE EAP: EAP entering state IDLE EAPOL: SUPP_BE entering state RESPONSE EAPOL: txSuppRsp TX EAPOL - hexdump(len=26): 01 00 00 16 02 01 00 16 04 10 e8 5f fa a3 fe 5d 10 a6 4a 65 11 6d f0 25 19 35 EAPOL: SUPP_BE entering state RECEIVE RX EAPOL from 00:03:7f:09:60:a0 RX EAPOL - hexdump(len=8): 01 00 00 04 04 01 00 04 EAPOL: Received EAP-Packet frame EAPOL: SUPP_BE entering state REQUEST EAPOL: getSuppRsp EAP: EAP entering state RECEIVED EAP: Received EAP-Failure EAP: EAP entering state DISCARD EAP: EAP entering state IDLE EAPOL: SUPP_BE entering state RECEIVE EAPOL: startWhen --> 0 EAPOL: authWhile --> 0 EAPOL: SUPP_BE entering state TIMEOUT EAPOL: SUPP_PAE entering state CONNECTING EAPOL: SUPP_BE entering state IDLE RX EAPOL from 00:03:7f:09:60:a0 RX EAPOL - hexdump(len=9): 01 00 00 05 01 02 00 05 01 EAPOL: Received EAP-Packet frame EAPOL: SUPP_PAE entering state RESTART EAP: EAP entering state INITIALIZE EAP: deinitialize previously used EAP method (4, MD5) at INITIALIZE EAP: EAP entering state IDLE EAPOL: SUPP_PAE entering state AUTHENTICATING EAPOL: SUPP_BE entering state REQUEST EAPOL: getSuppRsp EAP: EAP entering state RECEIVED EAP: Received EAP-Request id=2 method=1 vendor=0 vendorMethod=0 EAP: EAP entering state IDENTITY CTRL-EVENT-EAP-STARTED EAP authentication started EAP: EAP-Request Identity data - hexdump_ascii(len=0): EAP: using real identity - hexdump_ascii(len=8): 74 65 73 74 75 73 65 72 testuser EAP: EAP entering state SEND_RESPONSE EAP: EAP entering state IDLE EAPOL: SUPP_BE entering state RESPONSE EAPOL: txSuppRsp TX EAPOL - hexdump(len=17): 01 00 00 0d 02 02 00 0d 01 74 65 73 74 75 73 65 72 EAPOL: SUPP_BE entering state RECEIVE RX EAPOL from 00:03:7f:09:60:a0 RX EAPOL - hexdump(len=26): 01 00 00 16 01 03 00 16 04 10 68 c8 ea 0c 97 f7 11 d3 f3 2a cd 62 8c 37 4d 40 EAPOL: Received EAP-Packet frame EAPOL: SUPP_BE entering state REQUEST EAPOL: getSuppRsp EAP: EAP entering state RECEIVED EAP: Received EAP-Request id=3 method=4 vendor=0 vendorMethod=0 EAP: EAP entering state GET_METHOD EAP: Initialize selected EAP method: vendor 0 method 4 (MD5) CTRL-EVENT-EAP-METHOD EAP vendor 0 method 4 (MD5) selected EAP: EAP entering state METHOD EAP-MD5: Challenge - hexdump(len=16): 68 c8 ea 0c 97 f7 11 d3 f3 2a cd 62 8c 37 4d 40 EAP-MD5: Generating Challenge Response EAP-MD5: Response - hexdump(len=16): 03 76 fc e7 ce bc 66 b6 cd 50 2a 73 b3 cf eb 93 EAP: method process -> ignore=FALSE methodState=DONE decision=UNCOND_SUCC EAP: EAP entering state SEND_RESPONSE EAP: EAP entering state IDLE EAPOL: SUPP_BE entering state RESPONSE EAPOL: txSuppRsp TX EAPOL - hexdump(len=26): 01 00 00 16 02 03 00 16 04 10 03 76 fc e7 ce bc 66 b6 cd 50 2a 73 b3 cf eb 93 EAPOL: SUPP_BE entering state RECEIVE RX EAPOL from 00:03:7f:09:60:a0 RX EAPOL - hexdump(len=8): 01 00 00 04 04 03 00 04 EAPOL: Received EAP-Packet frame EAPOL: SUPP_BE entering state REQUEST EAPOL: getSuppRsp EAP: EAP entering state RECEIVED EAP: Received EAP-Failure EAP: EAP entering state DISCARD EAP: EAP entering state IDLE EAPOL: SUPP_BE entering state RECEIVE EAPOL: startWhen --> 0 EAPOL: authWhile --> 0 EAPOL: SUPP_BE entering state TIMEOUT EAPOL: SUPP_PAE entering state CONNECTING EAPOL: SUPP_BE entering state IDLE RX EAPOL from 00:03:7f:09:60:a0 RX EAPOL - hexdump(len=9): 01 00 00 05 01 04 00 05 01 EAPOL: Received EAP-Packet frame EAPOL: SUPP_PAE entering state RESTART EAP: EAP entering state INITIALIZE EAP: deinitialize previously used EAP method (4, MD5) at INITIALIZE EAP: EAP entering state IDLE EAPOL: SUPP_PAE entering state AUTHENTICATING EAPOL: SUPP_BE entering state REQUEST EAPOL: getSuppRsp EAP: EAP entering state RECEIVED EAP: Received EAP-Request id=4 method=1 vendor=0 vendorMethod=0 EAP: EAP entering state IDENTITY CTRL-EVENT-EAP-STARTED EAP authentication started EAP: EAP-Request Identity data - hexdump_ascii(len=0): EAP: using real identity - hexdump_ascii(len=8): 74 65 73 74 75 73 65 72 testuser EAP: EAP entering state SEND_RESPONSE EAP: EAP entering state IDLE EAPOL: SUPP_BE entering state RESPONSE the problem is i am getting EAP-FAILURE on client side even when server is giving ACCESS-ACCEPT!!!! i am not able to figure out the problem output of server is same as that in earlier mail, one more thing what will be end message of this, will it be authentication or association? When i run GUI for supplicant it is showing associated not authenticated! is it end of connection and after it should i get an IP from that AP, even if i try for DHCP i am not able to get an IP!!!! it is all messed up, please do reply for this prob!!! regards shantanu tnt@kalik.co.yu wrote: Well, now you dont have any IP address in your accept packet. Not a problem if you are doing DHCP. Otherwise you need to return IP address, netmask, MTU, Service-Type, DNS servers etc. Leave that Framed-User DEFAULT entry alone - it should be there. You need to add stuff to your user config: testuser Cleartext-Password:=yourpassword Framed-IP-Address=1.2.3.4 Framed-MTU=yourMTU Framed-IP-Netmask=255.255.255.255 etc. Ivan Kalik Kalik Informatika ISP Dana 30/5/2007, "shantanu choudhary" pi¹e: --- snip ---
Sending Access-Accept of id 2 to 192.168.2.182 port 1028 EAP-Message = 0x03020004 Message-Authenticator = 0x00000000000000000000000000000000 User-Name = "testuser" Finished request 1 Going to the next request Waking up in 6 seconds... --- Walking the entire request list --- Cleaning up request 0 ID 1 with timestamp 465d506e Cleaning up request 1 ID 2 with timestamp 465d506e Nothing to do. Sleeping until we see a request.
it is sending ACCESS ACCEPT but no access reject or failure!!!! and when i try to check AP statistics from server it is showing an entry for AUTHENTICATION FAILURE!!!!!!!
sorry for disturbing u again n again but can u help me out???? please!! shantanu
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html --------------------------------- Did you know? You can CHAT without downloading messenger. Know how!