But the server doesn't send the reply to the client (Timeout at clientside)
rad_recv: Access-Request packet from host 10.0.1.131:57004, id=7, length=71 User-Name = "radius" NAS-IP-Address = 10.0.1.131 CHAP-Password = 0x7826d3a1143b969ddf5ea1599a9483574a CHAP-Challenge = 0x9899ee060e58b9864898d5fa165a2455 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 0 modcall[authorize]: module "preprocess" returns ok for request 0 rlm_chap: Setting 'Auth-Type := CHAP' modcall[authorize]: module "chap" returns ok for request 0 modcall[authorize]: module "mschap" returns noop for request 0 rlm_realm: No '@' in User-Name = "radius", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 0 rlm_eap: No EAP-Message, not doing EAP modcall[authorize]: module "eap" returns noop for request 0 users: Matched entry radius at line 52 modcall[authorize]: module "files" returns ok for request 0 perl_pool: item 0xb809a5f0 asigned new request. Handled so far: 1 found interpetator at address 0xb809a5f0 rlm_perl: Added pair User-Password = pass rlm_perl: Added pair Auth-Type = Perl perl_pool total/active/spare [5/0/5] Unreserve perl at address 0xb809a5f0 modcall[authorize]: module "perl" returns ok for request 0 rlm_pap: WARNING! No "known good" password found for the user. Authentication may fail because of this. modcall[authorize]: module "pap" returns noop for request 0 modcall: leaving group authorize (returns ok) for request 0 rad_check_password: Found Auth-Type Perl auth: type "Perl" Processing the authenticate section of radiusd.conf modcall: entering group Perl for request 0 perl_pool: item 0xb8181050 asigned new request. Handled so far: 1 found interpetator at address 0xb8181050 rlm_perl: RAD_REQUEST: Client-IP-Address = 10.0.1.131 rlm_perl: RAD_REQUEST: CHAP-Challenge = 0x9899ee060e58b9864898d5fa165a2455 rlm_perl: RAD_REQUEST: CHAP-Password = 0x7826d3a1143b969ddf5ea1599a9483574a rlm_perl: RAD_REQUEST: User-Name = radius rlm_perl: RAD_REQUEST: NAS-IP-Address = 10.0.1.131 rlm_perl: RAD_REPLY: Reply-Message = challenge: rlm_perl: RAD_REPLY: User-Password = pass rlm_perl: RAD_REPLY: State = challenge rlm_perl: Added pair Reply-Message = challenge: rlm_perl: Added pair User-Password = pass rlm_perl: Added pair State = challenge rlm_perl: Added pair Response-Packet-Type = Access-Challenge rlm_perl: Added pair Auth-Type = Perl perl_pool total/active/spare [5/0/5] Unreserve perl at address 0xb8181050 modcall[authenticate]: module "perl" returns handled for request 0 modcall: leaving group Perl (returns handled) for request 0 Finished request 0 Going to the next request --- Walking the entire request list --- Waking up in 6 seconds...
That's an outdated server version. Upgrade. It works in the current version. Ivan Kalik Kalik Informatika ISP