Alan: Thanks for the response. Running radiusd -X is a little difficult as these are production systems. And I am not able to reproduce the issue. It just seems to happen after a bit and restart resolves it. I will go the upgrade route and see if that resolves the issue. Thanks again On Wed, Jan 29, 2014 at 12:02 PM, Alan DeKok <aland@deployingradius.com> wrote:
Matthew Ceroni wrote:
I have a FreeRadius server setup that is used to authenticate a WPA2-Enteprise wireless network.
This is setup on a CentOS 6.5 server with FreeRadius version 2.1.12. I also followed the instructions on configuring ActiveDirectory.
OK...
Everything works, 99% of the time. However after a certain amount of time running I start to get authentication failures. The log shows:
<sigh> PLEASE follow instructions. Just use "radiusd -X". Any more debug output than that is annoying.
The issue is resolved by simply restarting FreeRadius.
Any help on further troubleshooting would be appreciated.
2.1.12 is years old. My suggestion is to upgrade to 2.2.3.
I don't recall seeing a similar problem in 2.1.12, though.
Alan DeKok. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html