Authentication and Rest

27 Mar 2018

      I have a problem with authenticating after a RESTful auth.  The response from the rest call seems to be integrating (free radius is expanding the response), but the Cleartext-Password doesn't seem to be carrying forward to the authentication portion.

There are a lot more 'authorize/authenticate' call sets than I expected, but in the end, I expected things to resolve; however, they fail with 'no Cleartext-Password' error message in the MD5 portion.

My goal is simply to have my routers call the Radius server, have the radius server call the the restful server, have the server either fail or return the password (cleartext is not my preference, but it will do for now), and authenticate the user.

I've been spending days on this, and I am very sure it's a simple configuration issue, but I am at a point where I need to yell for help from those far more experienced on this.

I do appreciate any help.

-Robert

PS -- I've included the full debug log:

FreeRADIUS Version 3.0.15

Copyright (C) 1999-2017 The FreeRADIUS server project and contributors

There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A

PARTICULAR PURPOSE

You may redistribute copies of FreeRADIUS under the terms of the

GNU General Public License

For more information about these matters, see the file named COPYRIGHT

Starting - reading configuration files ...

including dictionary file /usr/share/freeradius/dictionary

including dictionary file /usr/share/freeradius/dictionary.dhcp

including dictionary file /usr/share/freeradius/dictionary.vqp

including dictionary file /etc/freeradius/dictionary

including configuration file /etc/freeradius/radiusd.conf

including configuration file /etc/freeradius/proxy.conf

including configuration file /etc/freeradius/clients.conf

including files in directory /etc/freeradius/mods-enabled/

including configuration file /etc/freeradius/mods-enabled/expiration

including configuration file /etc/freeradius/mods-enabled/radutmp

including configuration file /etc/freeradius/mods-enabled/unpack

including configuration file /etc/freeradius/mods-enabled/files

including configuration file /etc/freeradius/mods-enabled/detail

including configuration file /etc/freeradius/mods-enabled/sradutmp

including configuration file /etc/freeradius/mods-enabled/passwd

including configuration file /etc/freeradius/mods-enabled/dynamic_clients

including configuration file /etc/freeradius/mods-enabled/realm

including configuration file /etc/freeradius/mods-enabled/echo

including configuration file /etc/freeradius/mods-enabled/ntlm_auth

including configuration file /etc/freeradius/mods-enabled/digest

including configuration file /etc/freeradius/mods-enabled/eap

including configuration file /etc/freeradius/mods-enabled/unix

including configuration file /etc/freeradius/mods-enabled/expr

including configuration file /etc/freeradius/mods-enabled/chap

including configuration file /etc/freeradius/mods-enabled/linelog

including configuration file /etc/freeradius/mods-enabled/detail.log

including configuration file /etc/freeradius/mods-enabled/pap

including configuration file /etc/freeradius/mods-enabled/exec

including configuration file /etc/freeradius/mods-enabled/cache_eap

including configuration file /etc/freeradius/mods-enabled/replicate

including configuration file /etc/freeradius/mods-enabled/mschap

including configuration file /etc/freeradius/mods-enabled/always

including configuration file /etc/freeradius/mods-enabled/utf8

including configuration file /etc/freeradius/mods-enabled/logintime

including configuration file /etc/freeradius/mods-enabled/soh

including configuration file /etc/freeradius/mods-enabled/attr_filter

including configuration file /etc/freeradius/mods-enabled/rest

including configuration file /etc/freeradius/mods-enabled/date

including configuration file /etc/freeradius/mods-enabled/preprocess

including files in directory /etc/freeradius/policy.d/

including configuration file /etc/freeradius/policy.d/debug

including configuration file /etc/freeradius/policy.d/cui

including configuration file /etc/freeradius/policy.d/filter

including configuration file /etc/freeradius/policy.d/dhcp

including configuration file /etc/freeradius/policy.d/eap

including configuration file /etc/freeradius/policy.d/canonicalization

including configuration file /etc/freeradius/policy.d/accounting

including configuration file /etc/freeradius/policy.d/control

including configuration file /etc/freeradius/policy.d/operator-name

including configuration file /etc/freeradius/policy.d/moonshot-targeted-ids

including configuration file /etc/freeradius/policy.d/abfab-tr

including files in directory /etc/freeradius/sites-enabled/

including configuration file /etc/freeradius/sites-enabled/inner-tunnel

including configuration file /etc/freeradius/sites-enabled/default

main {

 security {

  user = "freerad"

  group = "freerad"

  allow_core_dumps = no

 }

name = "freeradius"

prefix = "/usr"

localstatedir = "/var"

logdir = "/var/log/freeradius"

run_dir = "/var/run/freeradius"

}

main {

name = "freeradius"

prefix = "/usr"

localstatedir = "/var"

sbindir = "/usr/sbin"

logdir = "/var/log/freeradius"

run_dir = "/var/run/freeradius"

libdir = "/usr/lib/freeradius"

radacctdir = "/var/log/freeradius/radacct"

hostname_lookups = no

max_request_time = 30

cleanup_delay = 5

max_requests = 16384

pidfile = "/var/run/freeradius/freeradius.pid"

checkrad = "/usr/sbin/checkrad"

debug_level = 0

proxy_requests = yes

 log {

  stripped_names = no

  auth = no

  auth_badpass = no

  auth_goodpass = no

  colourise = yes

  msg_denied = "You are already logged in - access denied"

 }

 resources {

 }

 security {

  max_attributes = 200

  reject_delay = 1.000000

  status_server = yes

 }

}

radiusd: #### Loading Realms and Home Servers ####

 proxy server {

  retry_delay = 5

  retry_count = 3

  default_fallback = no

  dead_time = 120

  wake_all_if_all_dead = no

 }

 home_server localhost {

  ipaddr = 127.0.0.1

  port = 1812

  type = "auth"

  secret = <<< secret >>>

  response_window = 20.000000

  response_timeouts = 1

  max_outstanding = 65536

  zombie_period = 40

  status_check = "status-server"

  ping_interval = 30

  check_interval = 30

  check_timeout = 4

  num_answers_to_alive = 3

  revive_interval = 120

  limit {

  max_connections = 16

  max_requests = 0

  lifetime = 0

  idle_timeout = 0

  }

  coa {

  irt = 2

  mrt = 16

  mrc = 5

  mrd = 30

  }

 }

 home_server_pool my_auth_failover {

type = fail-over

home_server = localhost

 }

 realm example.com {

auth_pool = my_auth_failover

 }

 realm LOCAL {

 }

radiusd: #### Loading Clients ####

 client 0.0.0.0/0 {

  require_message_authenticator = no

  secret = <<< secret >>>

  shortname = "all"

  limit {

  max_connections = 16

  lifetime = 0

  idle_timeout = 30

  }

 }

No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client 0.0.0.0/0. Please fix your configuration

Support for old-style clients will be removed in a future release

 client ::/0 {

  require_message_authenticator = no

  secret = <<< secret >>>

  shortname = "all"

  limit {

  max_connections = 16

  lifetime = 0

  idle_timeout = 30

  }

 }

No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client ::/0. Please fix your configuration

Support for old-style clients will be removed in a future release

Debugger not attached

 # Creating Auth-Type = mschap

 # Creating Auth-Type = eap

 # Creating Auth-Type = PAP

 # Creating Auth-Type = CHAP

 # Creating Auth-Type = MS-CHAP

radiusd: #### Instantiating modules ####

 modules {

  # Loaded module rlm_expiration

  # Loading module "expiration" from file /etc/freeradius/mods-enabled/expiration

  # Loaded module rlm_radutmp

  # Loading module "radutmp" from file /etc/freeradius/mods-enabled/radutmp

  radutmp {

  filename = "/var/log/freeradius/radutmp"

  username = "%{User-Name}"

  case_sensitive = yes

  check_with_nas = yes

  permissions = 384

  caller_id = yes

  }

  # Loaded module rlm_unpack

  # Loading module "unpack" from file /etc/freeradius/mods-enabled/unpack

  # Loaded module rlm_files

  # Loading module "files" from file /etc/freeradius/mods-enabled/files

  files {

  filename = "/etc/freeradius/mods-config/files/authorize"

  acctusersfile = "/etc/freeradius/mods-config/files/accounting"

  preproxy_usersfile = "/etc/freeradius/mods-config/files/pre-proxy"

  }

  # Loaded module rlm_detail

  # Loading module "detail" from file /etc/freeradius/mods-enabled/detail

  detail {

  filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"

  header = "%t"

  permissions = 384

  locking = no

  escape_filenames = no

  log_packet_header = no

  }

  # Loading module "sradutmp" from file /etc/freeradius/mods-enabled/sradutmp

  radutmp sradutmp {

  filename = "/var/log/freeradius/sradutmp"

  username = "%{User-Name}"

  case_sensitive = yes

  check_with_nas = yes

  permissions = 420

  caller_id = no

  }

  # Loaded module rlm_passwd

  # Loading module "etc_passwd" from file /etc/freeradius/mods-enabled/passwd

  passwd etc_passwd {

  filename = "/etc/passwd"

  format = "*User-Name:Crypt-Password:"

  delimiter = ":"

  ignore_nislike = no

  ignore_empty = yes

  allow_multiple_keys = no

  hash_size = 100

  }

  # Loaded module rlm_dynamic_clients

  # Loading module "dynamic_clients" from file /etc/freeradius/mods-enabled/dynamic_clients

  # Loaded module rlm_realm

  # Loading module "IPASS" from file /etc/freeradius/mods-enabled/realm

  realm IPASS {

  format = "prefix"

  delimiter = "/"

  ignore_default = no

  ignore_null = no

  }

  # Loading module "suffix" from file /etc/freeradius/mods-enabled/realm

  realm suffix {

  format = "suffix"

  delimiter = "@"

  ignore_default = no

  ignore_null = no

  }

  # Loading module "realmpercent" from file /etc/freeradius/mods-enabled/realm

  realm realmpercent {

  format = "suffix"

  delimiter = "%"

  ignore_default = no

  ignore_null = no

  }

  # Loading module "ntdomain" from file /etc/freeradius/mods-enabled/realm

  realm ntdomain {

  format = "prefix"

  delimiter = "\\"

  ignore_default = no

  ignore_null = no

  }

  # Loaded module rlm_exec

  # Loading module "echo" from file /etc/freeradius/mods-enabled/echo

  exec echo {

  wait = yes

  program = "/bin/echo %{User-Name}"

  input_pairs = "request"

  output_pairs = "reply"

  shell_escape = yes

  }

  # Loading module "ntlm_auth" from file /etc/freeradius/mods-enabled/ntlm_auth

  exec ntlm_auth {

  wait = yes

  program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}"

  shell_escape = yes

  }

  # Loaded module rlm_digest

  # Loading module "digest" from file /etc/freeradius/mods-enabled/digest

  # Loaded module rlm_eap

  # Loading module "eap" from file /etc/freeradius/mods-enabled/eap

  eap {

  default_eap_type = "md5"

  timer_expire = 60

  ignore_unknown_eap_types = no

  cisco_accounting_username_bug = no

  max_sessions = 16384

  }

  # Loaded module rlm_unix

  # Loading module "unix" from file /etc/freeradius/mods-enabled/unix

  unix {

  radwtmp = "/var/log/freeradius/radwtmp"

  }

Creating attribute Unix-Group

  # Loaded module rlm_expr

  # Loading module "expr" from file /etc/freeradius/mods-enabled/expr

  expr {

  safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"

  }

  # Loaded module rlm_chap

  # Loading module "chap" from file /etc/freeradius/mods-enabled/chap

  # Loaded module rlm_linelog

  # Loading module "linelog" from file /etc/freeradius/mods-enabled/linelog

  linelog {

  filename = "/var/log/freeradius/linelog"

  escape_filenames = no

  syslog_severity = "info"

  permissions = 384

  format = "This is a log message for %{User-Name}"

  reference = "messages.%{%{reply:Packet-Type}:-default}"

  }

  # Loading module "log_accounting" from file /etc/freeradius/mods-enabled/linelog

  linelog log_accounting {

  filename = "/var/log/freeradius/linelog-accounting"

  escape_filenames = no

  syslog_severity = "info"

  permissions = 384

  format = ""

  reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"

  }

  # Loading module "auth_log" from file /etc/freeradius/mods-enabled/detail.log

  detail auth_log {

  filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"

  header = "%t"

  permissions = 384

  locking = no

  escape_filenames = no

  log_packet_header = no

  }

  # Loading module "reply_log" from file /etc/freeradius/mods-enabled/detail.log

  detail reply_log {

  filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"

  header = "%t"

  permissions = 384

  locking = no

  escape_filenames = no

  log_packet_header = no

  }

  # Loading module "pre_proxy_log" from file /etc/freeradius/mods-enabled/detail.log

  detail pre_proxy_log {

  filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"

  header = "%t"

  permissions = 384

  locking = no

  escape_filenames = no

  log_packet_header = no

  }

  # Loading module "post_proxy_log" from file /etc/freeradius/mods-enabled/detail.log

  detail post_proxy_log {

  filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"

  header = "%t"

  permissions = 384

  locking = no

  escape_filenames = no

  log_packet_header = no

  }

  # Loaded module rlm_pap

  # Loading module "pap" from file /etc/freeradius/mods-enabled/pap

  pap {

  normalise = yes

  }

  # Loading module "exec" from file /etc/freeradius/mods-enabled/exec

  exec {

  wait = no

  input_pairs = "request"

  shell_escape = yes

  timeout = 10

  }

  # Loaded module rlm_cache

  # Loading module "cache_eap" from file /etc/freeradius/mods-enabled/cache_eap

  cache cache_eap {

  driver = "rlm_cache_rbtree"

  key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"

  ttl = 15

  max_entries = 0

  epoch = 0

  add_stats = no

  }

  # Loaded module rlm_replicate

  # Loading module "replicate" from file /etc/freeradius/mods-enabled/replicate

  # Loaded module rlm_mschap

  # Loading module "mschap" from file /etc/freeradius/mods-enabled/mschap

  mschap {

  use_mppe = yes

  require_encryption = no

  require_strong = no

  with_ntdomain_hack = yes

   passchange {

   }

  allow_retry = yes

  winbind_retry_with_normalised_username = no

  }

  # Loaded module rlm_always

  # Loading module "reject" from file /etc/freeradius/mods-enabled/always

  always reject {

  rcode = "reject"

  simulcount = 0

  mpp = no

  }

  # Loading module "fail" from file /etc/freeradius/mods-enabled/always

  always fail {

  rcode = "fail"

  simulcount = 0

  mpp = no

  }

  # Loading module "ok" from file /etc/freeradius/mods-enabled/always

  always ok {

  rcode = "ok"

  simulcount = 0

  mpp = no

  }

  # Loading module "handled" from file /etc/freeradius/mods-enabled/always

  always handled {

  rcode = "handled"

  simulcount = 0

  mpp = no

  }

  # Loading module "invalid" from file /etc/freeradius/mods-enabled/always

  always invalid {

  rcode = "invalid"

  simulcount = 0

  mpp = no

  }

  # Loading module "userlock" from file /etc/freeradius/mods-enabled/always

  always userlock {

  rcode = "userlock"

  simulcount = 0

  mpp = no

  }

  # Loading module "notfound" from file /etc/freeradius/mods-enabled/always

  always notfound {

  rcode = "notfound"

  simulcount = 0

  mpp = no

  }

  # Loading module "noop" from file /etc/freeradius/mods-enabled/always

  always noop {

  rcode = "noop"

  simulcount = 0

  mpp = no

  }

  # Loading module "updated" from file /etc/freeradius/mods-enabled/always

  always updated {

  rcode = "updated"

  simulcount = 0

  mpp = no

  }

  # Loaded module rlm_utf8

  # Loading module "utf8" from file /etc/freeradius/mods-enabled/utf8

  # Loaded module rlm_logintime

  # Loading module "logintime" from file /etc/freeradius/mods-enabled/logintime

  logintime {

  minimum_timeout = 60

  }

  # Loaded module rlm_soh

  # Loading module "soh" from file /etc/freeradius/mods-enabled/soh

  soh {

  dhcp = yes

  }

  # Loaded module rlm_attr_filter

  # Loading module "attr_filter.post-proxy" from file /etc/freeradius/mods-enabled/attr_filter

  attr_filter attr_filter.post-proxy {

  filename = "/etc/freeradius/mods-config/attr_filter/post-proxy"

  key = "%{Realm}"

  relaxed = no

  }

  # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/mods-enabled/attr_filter

  attr_filter attr_filter.pre-proxy {

  filename = "/etc/freeradius/mods-config/attr_filter/pre-proxy"

  key = "%{Realm}"

  relaxed = no

  }

  # Loading module "attr_filter.access_reject" from file /etc/freeradius/mods-enabled/attr_filter

  attr_filter attr_filter.access_reject {

  filename = "/etc/freeradius/mods-config/attr_filter/access_reject"

  key = "%{User-Name}"

  relaxed = no

  }

  # Loading module "attr_filter.access_challenge" from file /etc/freeradius/mods-enabled/attr_filter

  attr_filter attr_filter.access_challenge {

  filename = "/etc/freeradius/mods-config/attr_filter/access_challenge"

  key = "%{User-Name}"

  relaxed = no

  }

  # Loading module "attr_filter.accounting_response" from file /etc/freeradius/mods-enabled/attr_filter

  attr_filter attr_filter.accounting_response {

  filename = "/etc/freeradius/mods-config/attr_filter/accounting_response"

  key = "%{User-Name}"

  relaxed = no

  }

  # Loaded module rlm_rest

  # Loading module "rest" from file /etc/freeradius/mods-enabled/rest

  rest {

  connect_uri = "http://127.0.0.1:38080/"

  connect_timeout = 4.000000

  }

  # Loaded module rlm_date

  # Loading module "date" from file /etc/freeradius/mods-enabled/date

  date {

  format = "%b %e %Y %H:%M:%S %Z"

  utc = no

  }

  # Loaded module rlm_preprocess

  # Loading module "preprocess" from file /etc/freeradius/mods-enabled/preprocess

  preprocess {

  huntgroups = "/etc/freeradius/mods-config/preprocess/huntgroups"

  hints = "/etc/freeradius/mods-config/preprocess/hints"

  with_ascend_hack = no

  ascend_channels_per_line = 23

  with_ntdomain_hack = no

  with_specialix_jetstream_hack = no

  with_cisco_vsa_hack = no

  with_alvarion_vsa_hack = no

  }

  instantiate {

  }

  # Instantiating module "expiration" from file /etc/freeradius/mods-enabled/expiration

  # Instantiating module "files" from file /etc/freeradius/mods-enabled/files

reading pairlist file /etc/freeradius/mods-config/files/authorize

reading pairlist file /etc/freeradius/mods-config/files/accounting

reading pairlist file /etc/freeradius/mods-config/files/pre-proxy

  # Instantiating module "detail" from file /etc/freeradius/mods-enabled/detail

  # Instantiating module "etc_passwd" from file /etc/freeradius/mods-enabled/passwd

rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no

  # Instantiating module "IPASS" from file /etc/freeradius/mods-enabled/realm

  # Instantiating module "suffix" from file /etc/freeradius/mods-enabled/realm

  # Instantiating module "realmpercent" from file /etc/freeradius/mods-enabled/realm

  # Instantiating module "ntdomain" from file /etc/freeradius/mods-enabled/realm

  # Instantiating module "eap" from file /etc/freeradius/mods-enabled/eap

   # Linked to sub-module rlm_eap_md5

   # Linked to sub-module rlm_eap_leap

   # Linked to sub-module rlm_eap_gtc

   gtc {

    challenge = "Password: "

    auth_type = "PAP"

   }

   # Linked to sub-module rlm_eap_tls

   tls {

    tls = "tls-common"

   }

   tls-config tls-common {

    verify_depth = 0

    ca_path = "/etc/freeradius/certs"

    pem_file_type = yes

    private_key_file = "/etc/freeradius/certs/server.pem"

    certificate_file = "/etc/freeradius/certs/server.pem"

    ca_file = "/etc/freeradius/certs/ca.pem"

    private_key_password = <<< secret >>>

    dh_file = "/etc/freeradius/certs/dh"

    fragment_size = 1024

    include_length = yes

    auto_chain = yes

    check_crl = no

    check_all_crl = no

    cipher_list = "DEFAULT"

    cipher_server_preference = no

    ecdh_curve = "prime256v1"

    cache {

    enable = no

    lifetime = 24

    max_entries = 255

    }

    verify {

    skip_if_ocsp_ok = no

    }

    ocsp {

    enable = no

    override_cert_url = yes

    url = "http://127.0.0.1/ocsp/"

    use_nonce = yes

    timeout = 0

    softfail = no

    }

   }

   # Linked to sub-module rlm_eap_ttls

   ttls {

    tls = "tls-common"

    default_eap_type = "md5"

    copy_request_to_tunnel = no

    use_tunneled_reply = no

    virtual_server = "inner-tunnel"

    include_length = yes

    require_client_cert = no

   }

tls: Using cached TLS configuration from previous invocation

   # Linked to sub-module rlm_eap_peap

   peap {

    tls = "tls-common"

    default_eap_type = "pap"

    copy_request_to_tunnel = no

    use_tunneled_reply = no

    proxy_tunneled_request_as_eap = yes

    virtual_server = "inner-tunnel"

    soh = no

    require_client_cert = no

   }

tls: Using cached TLS configuration from previous invocation

   # Linked to sub-module rlm_eap_mschapv2

   mschapv2 {

    with_ntdomain_hack = no

    send_error = no

   }

  # Instantiating module "linelog" from file /etc/freeradius/mods-enabled/linelog

  # Instantiating module "log_accounting" from file /etc/freeradius/mods-enabled/linelog

  # Instantiating module "auth_log" from file /etc/freeradius/mods-enabled/detail.log

rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output

  # Instantiating module "reply_log" from file /etc/freeradius/mods-enabled/detail.log

  # Instantiating module "pre_proxy_log" from file /etc/freeradius/mods-enabled/detail.log

  # Instantiating module "post_proxy_log" from file /etc/freeradius/mods-enabled/detail.log

  # Instantiating module "pap" from file /etc/freeradius/mods-enabled/pap

  # Instantiating module "cache_eap" from file /etc/freeradius/mods-enabled/cache_eap

rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked

  # Instantiating module "mschap" from file /etc/freeradius/mods-enabled/mschap

rlm_mschap (mschap): using internal authentication

  # Instantiating module "reject" from file /etc/freeradius/mods-enabled/always

  # Instantiating module "fail" from file /etc/freeradius/mods-enabled/always

  # Instantiating module "ok" from file /etc/freeradius/mods-enabled/always

  # Instantiating module "handled" from file /etc/freeradius/mods-enabled/always

  # Instantiating module "invalid" from file /etc/freeradius/mods-enabled/always

  # Instantiating module "userlock" from file /etc/freeradius/mods-enabled/always

  # Instantiating module "notfound" from file /etc/freeradius/mods-enabled/always

  # Instantiating module "noop" from file /etc/freeradius/mods-enabled/always

  # Instantiating module "updated" from file /etc/freeradius/mods-enabled/always

  # Instantiating module "logintime" from file /etc/freeradius/mods-enabled/logintime

  # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/mods-enabled/attr_filter

reading pairlist file /etc/freeradius/mods-config/attr_filter/post-proxy

  # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/mods-enabled/attr_filter

reading pairlist file /etc/freeradius/mods-config/attr_filter/pre-proxy

  # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/mods-enabled/attr_filter

reading pairlist file /etc/freeradius/mods-config/attr_filter/access_reject

[/etc/freeradius/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT".

[/etc/freeradius/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT".

  # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/mods-enabled/attr_filter

reading pairlist file /etc/freeradius/mods-config/attr_filter/access_challenge

  # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/mods-enabled/attr_filter

reading pairlist file /etc/freeradius/mods-config/attr_filter/accounting_response

  # Instantiating module "rest" from file /etc/freeradius/mods-enabled/rest

   authorize {

    uri = "http://127.0.0.1:38080/?user=%{User-Name}&mac=%{Called-Station-ID}&action=authorize"

    method = "get"

    body = "json"

    force_to = "json"

    auth = "none"

    require_auth = no

    timeout = 4.000000

    chunk = 0

    tls {

    check_cert = no

    check_cert_cn = no

    }

   }

   authenticate {

    uri = "http://127.0.0.1:38080/?user=%{User-Name}&mac=%{Called-Station-ID}&action=authenticate"

    method = "get"

    body = "json"

    force_to = "json"

    auth = "none"

    require_auth = no

    timeout = 4.000000

    chunk = 0

    tls {

    check_cert = no

    check_cert_cn = no

    }

   }

   accounting {

    uri = "http://127.0.0.1:38080/?user=%{User-Name}&sessions=%{Acct-Unique-Session-ID}"

    method = "post"

    body = "none"

    auth = "none"

    require_auth = no

    timeout = 4.000000

    chunk = 0

    tls {

    check_cert = no

    check_cert_cn = no

    }

   }

   post-auth {

    uri = "http://127.0.0.1:38080/?user=%{User-Name}&mac=%{Called-Station-ID}&action=post-auth"

    method = "post"

    body = "none"

    auth = "none"

    require_auth = no

    timeout = 4.000000

    chunk = 0

    tls {

    check_cert = no

    check_cert_cn = no

    }

   }

rlm_rest: libcurl version: libcurl/7.35.0 OpenSSL/1.0.1f zlib/1.2.8 libidn/1.28 librtmp/2.3

rlm_rest (rest): Initialising connection pool

   pool {

    start = 5

    min = 3

    max = 32

    spare = 10

    uses = 0

    lifetime = 0

    cleanup_interval = 30

    idle_timeout = 60

    retry_delay = 30

    spread = no

   }

rlm_rest (rest): Opening additional connection (0), 1 of 32 pending slots used

rlm_rest (rest): Connecting to "http://127.0.0.1:38080/"

rlm_rest (rest): Opening additional connection (1), 1 of 31 pending slots used

rlm_rest (rest): Connecting to "http://127.0.0.1:38080/"

rlm_rest (rest): Opening additional connection (2), 1 of 30 pending slots used

rlm_rest (rest): Connecting to "http://127.0.0.1:38080/"

rlm_rest (rest): Opening additional connection (3), 1 of 29 pending slots used

rlm_rest (rest): Connecting to "http://127.0.0.1:38080/"

rlm_rest (rest): Opening additional connection (4), 1 of 28 pending slots used

rlm_rest (rest): Connecting to "http://127.0.0.1:38080/"

  # Instantiating module "preprocess" from file /etc/freeradius/mods-enabled/preprocess

reading pairlist file /etc/freeradius/mods-config/preprocess/huntgroups

reading pairlist file /etc/freeradius/mods-config/preprocess/hints

 } # modules

radiusd: #### Loading Virtual Servers ####

server { # from file /etc/freeradius/radiusd.conf

} # server

server inner-tunnel { # from file /etc/freeradius/sites-enabled/inner-tunnel

 # Loading authenticate {...}

 # Loading authorize {...}

Ignoring "sql" (see raddb/mods-available/README.rst)

Ignoring "ldap" (see raddb/mods-available/README.rst)

 # Loading session {...}

 # Loading post-proxy {...}

 # Loading post-auth {...}

 # Skipping contents of 'if' as it is always 'false' -- /etc/freeradius/sites-enabled/inner-tunnel:331

} # server inner-tunnel

server default { # from file /etc/freeradius/sites-enabled/default

 # Loading authenticate {...}

 # Loading authorize {...}

 # Loading preacct {...}

 # Loading accounting {...}

 # Loading post-proxy {...}

 # Loading post-auth {...}

} # server default

radiusd: #### Opening IP addresses and Ports ####

listen {

  type = "auth"

  ipaddr = 127.0.0.1

  port = 18120

}

listen {

  type = "auth"

  ipaddr = *

  port = 0

   limit {

    max_connections = 16

    lifetime = 0

    idle_timeout = 30

   }

}

listen {

  type = "acct"

  ipaddr = *

  port = 0

   limit {

    max_connections = 16

    lifetime = 0

    idle_timeout = 30

   }

}

listen {

  type = "auth"

  ipv6addr = ::

  port = 0

   limit {

    max_connections = 16

    lifetime = 0

    idle_timeout = 30

   }

}

listen {

  type = "acct"

  ipv6addr = ::

  port = 0

   limit {

    max_connections = 16

    lifetime = 0

    idle_timeout = 30

   }

}

Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel

Listening on auth address * port 1812 bound to server default

Listening on acct address * port 1813 bound to server default

Listening on auth address :: port 1812 bound to server default

Listening on acct address :: port 1813 bound to server default

Listening on proxy address * port 55452

Listening on proxy address :: port 40543

Ready to process requests

(0) Received Access-Request Id 126 from 12.148.189.27:47323 to 172.31.26.65:1812 length 176

(0)   User-Name = "testuser"

(0)   NAS-IP-Address = 127.0.0.1

(0)   Called-Station-Id = "02-F0-21-36-26-47:radtest"

(0)   NAS-Port-Type = Wireless-802.11

(0)   NAS-Port = 1

(0)   Calling-Station-Id = "FC-DB-B3-D8-B2-A9"

(0)   Connect-Info = "CONNECT 54Mbps 802.11a"

(0)   Acct-Session-Id = "5AB3D033-0000007E"

(0)   Framed-MTU = 1400

(0)   EAP-Message = 0x021c000d017465737475736572

(0)   Message-Authenticator = 0xb3bf7a0e42522c64b845df1b0a401227

(0) # Executing section authorize from file /etc/freeradius/sites-enabled/default

(0)   authorize {

(0)     policy filter_username {

(0)       if (&User-Name) {

(0)       if (&User-Name)  -> TRUE

(0)       if (&User-Name)  {

(0)         if (&User-Name =~ / /) {

(0)         if (&User-Name =~ / /)  -> FALSE

(0)         if (&User-Name =~ /@[^@]*@/ ) {

(0)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE

(0)         if (&User-Name =~ /\.\./ ) {

(0)         if (&User-Name =~ /\.\./ )  -> FALSE

(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {

(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE

(0)         if (&User-Name =~ /\.$/)  {

(0)         if (&User-Name =~ /\.$/)   -> FALSE

(0)         if (&User-Name =~ /@\./)  {

(0)         if (&User-Name =~ /@\./)   -> FALSE

(0)       } # if (&User-Name)  = notfound

(0)     } # policy filter_username = notfound

(0)     [preprocess] = ok

rlm_rest (rest): Reserved connection (0)

(0) rest: Expanding URI components

(0) rest: EXPAND http://127.0.0.1:38080

(0) rest:    --> http://127.0.0.1:38080

(0) rest: EXPAND /?user=%{User-Name}&mac=%{Called-Station-ID}&action=authorize

(0) rest:    --> /?user=testuser&mac=02-F0-21-36-26-47%3Aradtest&action=authorize

(0) rest: Sending HTTP GET to "http://127.0.0.1:38080/?user=testuser&mac=02-F0-21-36-26-47%3Aradtest&action..."

(0) rest: Processing response header

(0) rest:   Status : 200 (OK)

(0) rest: Parsing attribute "Cleartext-Password"

(0) rest: EXPAND xxx

(0) rest:    --> xxx

(0) rest: Cleartext-Password := "xxx"

rlm_rest (rest): Released connection (0)

Need 5 more connections to reach 10 spares

rlm_rest (rest): Opening additional connection (5), 1 of 27 pending slots used

rlm_rest (rest): Connecting to "http://127.0.0.1:38080/"

(0)     [rest] = updated

(0) eap: Peer sent EAP Response (code 2) ID 28 length 13

(0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize

(0)     [eap] = ok

(0)   } # authorize = ok

(0) Found Auth-Type = eap

(0) # Executing group from file /etc/freeradius/sites-enabled/default

(0)   authenticate {

(0) eap: Peer sent packet with method EAP Identity (1)

(0) eap: Calling submodule eap_md5 to process data

(0) eap_md5: Issuing MD5 Challenge

(0) eap: Sending EAP Request (code 1) ID 29 length 22

(0) eap: EAP session adding &reply:State = 0x0b4114500b5c10c8

(0)     [eap] = handled

(0)   } # authenticate = handled

(0) Using Post-Auth-Type Challenge

(0) # Executing group from file /etc/freeradius/sites-enabled/default

(0)   Challenge { ... } # empty sub-section is ignored

(0) Sent Access-Challenge Id 126 from 172.31.26.65:1812 to 12.148.189.27:47323 length 0

(0)   EAP-Message = 0x011d001604107222bffedbe1e4df07465cc2578ce4a3

(0)   Message-Authenticator = 0x00000000000000000000000000000000

(0)   State = 0x0b4114500b5c10c83a88292d3ebd9d32

(0) Finished request

Waking up in 4.9 seconds.

(1) Received Access-Request Id 127 from 12.148.189.27:47323 to 172.31.26.65:1812 length 187

(1)   User-Name = "testuser"

(1)   NAS-IP-Address = 127.0.0.1

(1)   Called-Station-Id = "02-F0-21-36-26-47:radtest"

(1)   NAS-Port-Type = Wireless-802.11

(1)   NAS-Port = 1

(1)   Calling-Station-Id = "FC-DB-B3-D8-B2-A9"

(1)   Connect-Info = "CONNECT 54Mbps 802.11a"

(1)   Acct-Session-Id = "5AB3D033-0000007E"

(1)   Framed-MTU = 1400

(1)   EAP-Message = 0x021d00060319

(1)   State = 0x0b4114500b5c10c83a88292d3ebd9d32

(1)   Message-Authenticator = 0x18782e10664f35e3407bae19710a649b

(1) session-state: No cached attributes

(1) # Executing section authorize from file /etc/freeradius/sites-enabled/default

(1)   authorize {

(1)     policy filter_username {

(1)       if (&User-Name) {

(1)       if (&User-Name)  -> TRUE

(1)       if (&User-Name)  {

(1)         if (&User-Name =~ / /) {

(1)         if (&User-Name =~ / /)  -> FALSE

(1)         if (&User-Name =~ /@[^@]*@/ ) {

(1)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE

(1)         if (&User-Name =~ /\.\./ ) {

(1)         if (&User-Name =~ /\.\./ )  -> FALSE

(1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {

(1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE

(1)         if (&User-Name =~ /\.$/)  {

(1)         if (&User-Name =~ /\.$/)   -> FALSE

(1)         if (&User-Name =~ /@\./)  {

(1)         if (&User-Name =~ /@\./)   -> FALSE

(1)       } # if (&User-Name)  = notfound

(1)     } # policy filter_username = notfound

(1)     [preprocess] = ok

rlm_rest (rest): Reserved connection (1)

(1) rest: Expanding URI components

(1) rest: EXPAND http://127.0.0.1:38080

(1) rest:    --> http://127.0.0.1:38080

(1) rest: EXPAND /?user=%{User-Name}&mac=%{Called-Station-ID}&action=authorize

(1) rest:    --> /?user=testuser&mac=02-F0-21-36-26-47%3Aradtest&action=authorize

(1) rest: Sending HTTP GET to "http://127.0.0.1:38080/?user=testuser&mac=02-F0-21-36-26-47%3Aradtest&action..."

(1) rest: Processing response header

(1) rest:   Status : 200 (OK)

(1) rest: Parsing attribute "Cleartext-Password"

(1) rest: EXPAND xxx

(1) rest:    --> xxx

(1) rest: Cleartext-Password := "xxx"

rlm_rest (rest): Released connection (1)

(1)     [rest] = updated

(1) eap: Peer sent EAP Response (code 2) ID 29 length 6

(1) eap: No EAP Start, assuming it's an on-going EAP conversation

(1)     [eap] = updated

(1)     [expiration] = noop

(1)     [logintime] = noop

(1) pap: WARNING: No "known good" password found for the user.  Not setting Auth-Type

(1) pap: WARNING: Authentication will fail unless a "known good" password is available

(1)     [pap] = noop

(1)   } # authorize = updated

(1) Found Auth-Type = eap

(1) # Executing group from file /etc/freeradius/sites-enabled/default

(1)   authenticate {

(1) eap: Expiring EAP session with state 0x0b4114500b5c10c8

(1) eap: Finished EAP session with state 0x0b4114500b5c10c8

(1) eap: Previous EAP request found for state 0x0b4114500b5c10c8, released from the list

(1) eap: Peer sent packet with method EAP NAK (3)

(1) eap: Found mutually acceptable type PEAP (25)

(1) eap: Calling submodule eap_peap to process data

(1) eap_peap: Initiating new EAP-TLS session

(1) eap_peap: [eaptls start] = request

(1) eap: Sending EAP Request (code 1) ID 30 length 6

(1) eap: EAP session adding &reply:State = 0x0b4114500a5f0dc8

(1)     [eap] = handled

(1)   } # authenticate = handled

(1) Using Post-Auth-Type Challenge

(1) # Executing group from file /etc/freeradius/sites-enabled/default

(1)   Challenge { ... } # empty sub-section is ignored

(1) Sent Access-Challenge Id 127 from 172.31.26.65:1812 to 12.148.189.27:47323 length 0

(1)   EAP-Message = 0x011e00061920

(1)   Message-Authenticator = 0x00000000000000000000000000000000

(1)   State = 0x0b4114500a5f0dc83a88292d3ebd9d32

(1) Finished request

Waking up in 4.9 seconds.

(2) Received Access-Request Id 128 from 12.148.189.27:47323 to 172.31.26.65:1812 length 356

(2)   User-Name = "testuser"

(2)   NAS-IP-Address = 127.0.0.1

(2)   Called-Station-Id = "02-F0-21-36-26-47:radtest"

(2)   NAS-Port-Type = Wireless-802.11

(2)   NAS-Port = 1

(2)   Calling-Station-Id = "FC-DB-B3-D8-B2-A9"

(2)   Connect-Info = "CONNECT 54Mbps 802.11a"

(2)   Acct-Session-Id = "5AB3D033-0000007E"

(2)   Framed-MTU = 1400

(2)   EAP-Message = 0x021e00af1980000000a516030100a00100009c030335fd3465413bcc82dfcc24ae589cbe4b5f8b0da9bbd7e97c09826de05334a09c00003ec02cc030009fc02bc02f009ecca9cca8c00ac024c014c0280039006bc009c023c013c02700330067c007c011009d009c0035003d002f003c00050004000a01

(2)   State = 0x0b4114500a5f0dc83a88292d3ebd9d32

(2)   Message-Authenticator = 0x7968a4db8aeafec02915d7ec5028a281

(2) session-state: No cached attributes

(2) # Executing section authorize from file /etc/freeradius/sites-enabled/default

(2)   authorize {

(2)     policy filter_username {

(2)       if (&User-Name) {

(2)       if (&User-Name)  -> TRUE

(2)       if (&User-Name)  {

(2)         if (&User-Name =~ / /) {

(2)         if (&User-Name =~ / /)  -> FALSE

(2)         if (&User-Name =~ /@[^@]*@/ ) {

(2)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE

(2)         if (&User-Name =~ /\.\./ ) {

(2)         if (&User-Name =~ /\.\./ )  -> FALSE

(2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {

(2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE

(2)         if (&User-Name =~ /\.$/)  {

(2)         if (&User-Name =~ /\.$/)   -> FALSE

(2)         if (&User-Name =~ /@\./)  {

(2)         if (&User-Name =~ /@\./)   -> FALSE

(2)       } # if (&User-Name)  = notfound

(2)     } # policy filter_username = notfound

(2)     [preprocess] = ok

rlm_rest (rest): Reserved connection (2)

(2) rest: Expanding URI components

(2) rest: EXPAND http://127.0.0.1:38080

(2) rest:    --> http://127.0.0.1:38080

(2) rest: EXPAND /?user=%{User-Name}&mac=%{Called-Station-ID}&action=authorize

(2) rest:    --> /?user=testuser&mac=02-F0-21-36-26-47%3Aradtest&action=authorize

(2) rest: Sending HTTP GET to "http://127.0.0.1:38080/?user=testuser&mac=02-F0-21-36-26-47%3Aradtest&action..."

(2) rest: Processing response header

(2) rest:   Status : 200 (OK)

(2) rest: Parsing attribute "Cleartext-Password"

(2) rest: EXPAND xxx

(2) rest:    --> xxx

(2) rest: Cleartext-Password := "xxx"

rlm_rest (rest): Released connection (2)

(2)     [rest] = updated

(2) eap: Peer sent EAP Response (code 2) ID 30 length 175

(2) eap: Continuing tunnel setup

(2)     [eap] = ok

(2)   } # authorize = ok

(2) Found Auth-Type = eap

(2) # Executing group from file /etc/freeradius/sites-enabled/default

(2)   authenticate {

(2) eap: Expiring EAP session with state 0x0b4114500a5f0dc8

(2) eap: Finished EAP session with state 0x0b4114500a5f0dc8

(2) eap: Previous EAP request found for state 0x0b4114500a5f0dc8, released from the list

(2) eap: Peer sent packet with method EAP PEAP (25)

(2) eap: Calling submodule eap_peap to process data

(2) eap_peap: Continuing EAP-TLS

(2) eap_peap: Peer indicated complete TLS record size will be 165 bytes

(2) eap_peap: Got complete TLS record (165 bytes)

(2) eap_peap: [eaptls verify] = length included

(2) eap_peap: (other): before/accept initialization

(2) eap_peap: TLS_accept: before/accept initialization

(2) eap_peap: <<< recv TLS 1.2  [length 00a0]

(2) eap_peap: TLS_accept: SSLv3 read client hello A

(2) eap_peap: >>> send TLS 1.2  [length 0039]

(2) eap_peap: TLS_accept: SSLv3 write server hello A

(2) eap_peap: >>> send TLS 1.2  [length 08d3]

(2) eap_peap: TLS_accept: SSLv3 write certificate A

(2) eap_peap: >>> send TLS 1.2  [length 014d]

(2) eap_peap: TLS_accept: SSLv3 write key exchange A

(2) eap_peap: >>> send TLS 1.2  [length 0004]

(2) eap_peap: TLS_accept: SSLv3 write server done A

(2) eap_peap: TLS_accept: SSLv3 flush data

(2) eap_peap: TLS_accept: Need to read more data: SSLv3 read client certificate A

(2) eap_peap: TLS_accept: Need to read more data: SSLv3 read client certificate A

(2) eap_peap: In SSL Handshake Phase

(2) eap_peap: In SSL Accept mode

(2) eap_peap: [eaptls process] = handled

(2) eap: Sending EAP Request (code 1) ID 31 length 1004

(2) eap: EAP session adding &reply:State = 0x0b411450095e0dc8

(2)     [eap] = handled

(2)   } # authenticate = handled

(2) Using Post-Auth-Type Challenge

(2) # Executing group from file /etc/freeradius/sites-enabled/default

(2)   Challenge { ... } # empty sub-section is ignored

(2) Sent Access-Challenge Id 128 from 172.31.26.65:1812 to 12.148.189.27:47323 length 0

(2)   EAP-Message = 0x011f03ec19c000000a71160303003902000035030348d6e6436511a0c47d008c9b9c21faaacaf1bb0e7ef381737ef7480aa228b27400c03000000dff01000100000b00040300010216030308d30b0008cf0008cc0003de308203da308202c2a003020102020101300d06092a864886f70d01010b050030

(2)   Message-Authenticator = 0x00000000000000000000000000000000

(2)   State = 0x0b411450095e0dc83a88292d3ebd9d32

(2) Finished request

Waking up in 4.8 seconds.

(3) Received Access-Request Id 129 from 12.148.189.27:47323 to 172.31.26.65:1812 length 187

(3)   User-Name = "testuser"

(3)   NAS-IP-Address = 127.0.0.1

(3)   Called-Station-Id = "02-F0-21-36-26-47:radtest"

(3)   NAS-Port-Type = Wireless-802.11

(3)   NAS-Port = 1

(3)   Calling-Station-Id = "FC-DB-B3-D8-B2-A9"

(3)   Connect-Info = "CONNECT 54Mbps 802.11a"

(3)   Acct-Session-Id = "5AB3D033-0000007E"

(3)   Framed-MTU = 1400

(3)   EAP-Message = 0x021f00061900

(3)   State = 0x0b411450095e0dc83a88292d3ebd9d32

(3)   Message-Authenticator = 0x52f3d97fe9bb86b78cf4ac59cad41be0

(3) session-state: No cached attributes

(3) # Executing section authorize from file /etc/freeradius/sites-enabled/default

(3)   authorize {

(3)     policy filter_username {

(3)       if (&User-Name) {

(3)       if (&User-Name)  -> TRUE

(3)       if (&User-Name)  {

(3)         if (&User-Name =~ / /) {

(3)         if (&User-Name =~ / /)  -> FALSE

(3)         if (&User-Name =~ /@[^@]*@/ ) {

(3)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE

(3)         if (&User-Name =~ /\.\./ ) {

(3)         if (&User-Name =~ /\.\./ )  -> FALSE

(3)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {

(3)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE

(3)         if (&User-Name =~ /\.$/)  {

(3)         if (&User-Name =~ /\.$/)   -> FALSE

(3)         if (&User-Name =~ /@\./)  {

(3)         if (&User-Name =~ /@\./)   -> FALSE

(3)       } # if (&User-Name)  = notfound

(3)     } # policy filter_username = notfound

(3)     [preprocess] = ok

rlm_rest (rest): Reserved connection (3)

(3) rest: Expanding URI components

(3) rest: EXPAND http://127.0.0.1:38080

(3) rest:    --> http://127.0.0.1:38080

(3) rest: EXPAND /?user=%{User-Name}&mac=%{Called-Station-ID}&action=authorize

(3) rest:    --> /?user=testuser&mac=02-F0-21-36-26-47%3Aradtest&action=authorize

(3) rest: Sending HTTP GET to "http://127.0.0.1:38080/?user=testuser&mac=02-F0-21-36-26-47%3Aradtest&action..."

(3) rest: Processing response header

(3) rest:   Status : 200 (OK)

(3) rest: Parsing attribute "Cleartext-Password"

(3) rest: EXPAND xxx

(3) rest:    --> xxx

(3) rest: Cleartext-Password := "xxx"

rlm_rest (rest): Released connection (3)

(3)     [rest] = updated

(3) eap: Peer sent EAP Response (code 2) ID 31 length 6

(3) eap: Continuing tunnel setup

(3)     [eap] = ok

(3)   } # authorize = ok

(3) Found Auth-Type = eap

(3) # Executing group from file /etc/freeradius/sites-enabled/default

(3)   authenticate {

(3) eap: Expiring EAP session with state 0x0b411450095e0dc8

(3) eap: Finished EAP session with state 0x0b411450095e0dc8

(3) eap: Previous EAP request found for state 0x0b411450095e0dc8, released from the list

(3) eap: Peer sent packet with method EAP PEAP (25)

(3) eap: Calling submodule eap_peap to process data

(3) eap_peap: Continuing EAP-TLS

(3) eap_peap: Peer ACKed our handshake fragment

(3) eap_peap: [eaptls verify] = request

(3) eap_peap: [eaptls process] = handled

(3) eap: Sending EAP Request (code 1) ID 32 length 1000

(3) eap: EAP session adding &reply:State = 0x0b41145008610dc8

(3)     [eap] = handled

(3)   } # authenticate = handled

(3) Using Post-Auth-Type Challenge

(3) # Executing group from file /etc/freeradius/sites-enabled/default

(3)   Challenge { ... } # empty sub-section is ignored

(3) Sent Access-Challenge Id 129 from 172.31.26.65:1812 to 12.148.189.27:47323 length 0

(3)   EAP-Message = 0x012003e81940cde3f324ca249bedabd066119c681a573d117ea3022864366f480c80fa575ab23d705108c00198dba38d7f1c53bc178f86b8b688ef094e68e014e70acd43e2430c1bebdb6603f5d4fe0004e8308204e4308203cca0030201020209008e86baf6e55a51bd300d06092a864886f70d01010b

(3)   Message-Authenticator = 0x00000000000000000000000000000000

(3)   State = 0x0b41145008610dc83a88292d3ebd9d32

(3) Finished request

Waking up in 4.7 seconds.

(4) Received Access-Request Id 130 from 12.148.189.27:47323 to 172.31.26.65:1812 length 187

(4)   User-Name = "testuser"

(4)   NAS-IP-Address = 127.0.0.1

(4)   Called-Station-Id = "02-F0-21-36-26-47:radtest"

(4)   NAS-Port-Type = Wireless-802.11

(4)   NAS-Port = 1

(4)   Calling-Station-Id = "FC-DB-B3-D8-B2-A9"

(4)   Connect-Info = "CONNECT 54Mbps 802.11a"

(4)   Acct-Session-Id = "5AB3D033-0000007E"

(4)   Framed-MTU = 1400

(4)   EAP-Message = 0x022000061900

(4)   State = 0x0b41145008610dc83a88292d3ebd9d32

(4)   Message-Authenticator = 0x4a27d64a3b10e6a91137a697ac080bd6

(4) session-state: No cached attributes

(4) # Executing section authorize from file /etc/freeradius/sites-enabled/default

(4)   authorize {

(4)     policy filter_username {

(4)       if (&User-Name) {

(4)       if (&User-Name)  -> TRUE

(4)       if (&User-Name)  {

(4)         if (&User-Name =~ / /) {

(4)         if (&User-Name =~ / /)  -> FALSE

(4)         if (&User-Name =~ /@[^@]*@/ ) {

(4)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE

(4)         if (&User-Name =~ /\.\./ ) {

(4)         if (&User-Name =~ /\.\./ )  -> FALSE

(4)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {

(4)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE

(4)         if (&User-Name =~ /\.$/)  {

(4)         if (&User-Name =~ /\.$/)   -> FALSE

(4)         if (&User-Name =~ /@\./)  {

(4)         if (&User-Name =~ /@\./)   -> FALSE

(4)       } # if (&User-Name)  = notfound

(4)     } # policy filter_username = notfound

(4)     [preprocess] = ok

rlm_rest (rest): Reserved connection (4)

(4) rest: Expanding URI components

(4) rest: EXPAND http://127.0.0.1:38080

(4) rest:    --> http://127.0.0.1:38080

(4) rest: EXPAND /?user=%{User-Name}&mac=%{Called-Station-ID}&action=authorize

(4) rest:    --> /?user=testuser&mac=02-F0-21-36-26-47%3Aradtest&action=authorize

(4) rest: Sending HTTP GET to "http://127.0.0.1:38080/?user=testuser&mac=02-F0-21-36-26-47%3Aradtest&action..."

(4) rest: Processing response header

(4) rest:   Status : 200 (OK)

(4) rest: Parsing attribute "Cleartext-Password"

(4) rest: EXPAND xxx

(4) rest:    --> xxx

(4) rest: Cleartext-Password := "xxx"

rlm_rest (rest): Released connection (4)

(4)     [rest] = updated

(4) eap: Peer sent EAP Response (code 2) ID 32 length 6

(4) eap: Continuing tunnel setup

(4)     [eap] = ok

(4)   } # authorize = ok

(4) Found Auth-Type = eap

(4) # Executing group from file /etc/freeradius/sites-enabled/default

(4)   authenticate {

(4) eap: Expiring EAP session with state 0x0b41145008610dc8

(4) eap: Finished EAP session with state 0x0b41145008610dc8

(4) eap: Previous EAP request found for state 0x0b41145008610dc8, released from the list

(4) eap: Peer sent packet with method EAP PEAP (25)

(4) eap: Calling submodule eap_peap to process data

(4) eap_peap: Continuing EAP-TLS

(4) eap_peap: Peer ACKed our handshake fragment

(4) eap_peap: [eaptls verify] = request

(4) eap_peap: [eaptls process] = handled

(4) eap: Sending EAP Request (code 1) ID 33 length 691

(4) eap: EAP session adding &reply:State = 0x0b4114500f600dc8

(4)     [eap] = handled

(4)   } # authenticate = handled

(4) Using Post-Auth-Type Challenge

(4) # Executing group from file /etc/freeradius/sites-enabled/default

(4)   Challenge { ... } # empty sub-section is ignored

(4) Sent Access-Challenge Id 130 from 172.31.26.65:1812 to 12.148.189.27:47323 length 0

(4)   EAP-Message = 0x012102b319000530030101ff30360603551d1f042f302d302ba029a0278625687474703a2f2f7777772e6578616d706c652e6f72672f6578616d706c655f63612e63726c300d06092a864886f70d01010b05000382010100369b3dc157df2fc2d04eb9f9e4641dfcaf1bc39da12fb47b6e4b70629434ab

(4)   Message-Authenticator = 0x00000000000000000000000000000000

(4)   State = 0x0b4114500f600dc83a88292d3ebd9d32

(4) Finished request

Waking up in 4.6 seconds.

(5) Received Access-Request Id 131 from 12.148.189.27:47323 to 172.31.26.65:1812 length 317

(5)   User-Name = "testuser"

(5)   NAS-IP-Address = 127.0.0.1

(5)   Called-Station-Id = "02-F0-21-36-26-47:radtest"

(5)   NAS-Port-Type = Wireless-802.11

(5)   NAS-Port = 1

(5)   Calling-Station-Id = "FC-DB-B3-D8-B2-A9"

(5)   Connect-Info = "CONNECT 54Mbps 802.11a"

(5)   Acct-Session-Id = "5AB3D033-0000007E"

(5)   Framed-MTU = 1400

(5)   EAP-Message = 0x0221008819800000007e16030300461000004241043f89551524632bf7ca7035c29cb78cdc3afe9e4755b9c89f6f097584a51227523e6be7d2829d7b2a665b4a01eac4323c71aaea1a1c5e0b77be151216e7e0573714030300010116030300280000000000000000037cf591109ae9adcf8c7a203a8b21

(5)   State = 0x0b4114500f600dc83a88292d3ebd9d32

(5)   Message-Authenticator = 0x4855591436228d65c6b3b0c8464491bb

(5) session-state: No cached attributes

(5) # Executing section authorize from file /etc/freeradius/sites-enabled/default

(5)   authorize {

(5)     policy filter_username {

(5)       if (&User-Name) {

(5)       if (&User-Name)  -> TRUE

(5)       if (&User-Name)  {

(5)         if (&User-Name =~ / /) {

(5)         if (&User-Name =~ / /)  -> FALSE

(5)         if (&User-Name =~ /@[^@]*@/ ) {

(5)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE

(5)         if (&User-Name =~ /\.\./ ) {

(5)         if (&User-Name =~ /\.\./ )  -> FALSE

(5)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {

(5)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE

(5)         if (&User-Name =~ /\.$/)  {

(5)         if (&User-Name =~ /\.$/)   -> FALSE

(5)         if (&User-Name =~ /@\./)  {

(5)         if (&User-Name =~ /@\./)   -> FALSE

(5)       } # if (&User-Name)  = notfound

(5)     } # policy filter_username = notfound

(5)     [preprocess] = ok

rlm_rest (rest): Reserved connection (0)

(5) rest: Expanding URI components

(5) rest: EXPAND http://127.0.0.1:38080

(5) rest:    --> http://127.0.0.1:38080

(5) rest: EXPAND /?user=%{User-Name}&mac=%{Called-Station-ID}&action=authorize

(5) rest:    --> /?user=testuser&mac=02-F0-21-36-26-47%3Aradtest&action=authorize

(5) rest: Sending HTTP GET to "http://127.0.0.1:38080/?user=testuser&mac=02-F0-21-36-26-47%3Aradtest&action..."

(5) rest: Processing response header

(5) rest:   Status : 200 (OK)

(5) rest: Parsing attribute "Cleartext-Password"

(5) rest: EXPAND xxx

(5) rest:    --> xxx

(5) rest: Cleartext-Password := "xxx"

rlm_rest (rest): Released connection (0)

(5)     [rest] = updated

(5) eap: Peer sent EAP Response (code 2) ID 33 length 136

(5) eap: Continuing tunnel setup

(5)     [eap] = ok

(5)   } # authorize = ok

(5) Found Auth-Type = eap

(5) # Executing group from file /etc/freeradius/sites-enabled/default

(5)   authenticate {

(5) eap: Expiring EAP session with state 0x0b4114500f600dc8

(5) eap: Finished EAP session with state 0x0b4114500f600dc8

(5) eap: Previous EAP request found for state 0x0b4114500f600dc8, released from the list

(5) eap: Peer sent packet with method EAP PEAP (25)

(5) eap: Calling submodule eap_peap to process data

(5) eap_peap: Continuing EAP-TLS

(5) eap_peap: Peer indicated complete TLS record size will be 126 bytes

(5) eap_peap: Got complete TLS record (126 bytes)

(5) eap_peap: [eaptls verify] = length included

(5) eap_peap: <<< recv TLS 1.2  [length 0046]

(5) eap_peap: TLS_accept: SSLv3 read client key exchange A

(5) eap_peap: <<< recv TLS 1.2  [length 0001]

(5) eap_peap: <<< recv TLS 1.2  [length 0010]

(5) eap_peap: TLS_accept: SSLv3 read finished A

(5) eap_peap: >>> send TLS 1.2  [length 0001]

(5) eap_peap: TLS_accept: SSLv3 write change cipher spec A

(5) eap_peap: >>> send TLS 1.2  [length 0010]

(5) eap_peap: TLS_accept: SSLv3 write finished A

(5) eap_peap: TLS_accept: SSLv3 flush data

(5) eap_peap: (other): SSL negotiation finished successfully

(5) eap_peap: SSL Connection Established

(5) eap_peap: [eaptls process] = handled

(5) eap: Sending EAP Request (code 1) ID 34 length 57

(5) eap: EAP session adding &reply:State = 0x0b4114500e630dc8

(5)     [eap] = handled

(5)   } # authenticate = handled

(5) Using Post-Auth-Type Challenge

(5) # Executing group from file /etc/freeradius/sites-enabled/default

(5)   Challenge { ... } # empty sub-section is ignored

(5) Sent Access-Challenge Id 131 from 172.31.26.65:1812 to 12.148.189.27:47323 length 0

(5)   EAP-Message = 0x0122003919001403030001011603030028c83609123255ee4657216f1cd0a07291e8556a7f8333a357f12ce21a3437bb6921b5640c1cc11096

(5)   Message-Authenticator = 0x00000000000000000000000000000000

(5)   State = 0x0b4114500e630dc83a88292d3ebd9d32

(5) Finished request

Waking up in 4.5 seconds.

(6) Received Access-Request Id 132 from 12.148.189.27:47323 to 172.31.26.65:1812 length 187

(6)   User-Name = "testuser"

(6)   NAS-IP-Address = 127.0.0.1

(6)   Called-Station-Id = "02-F0-21-36-26-47:radtest"

(6)   NAS-Port-Type = Wireless-802.11

(6)   NAS-Port = 1

(6)   Calling-Station-Id = "FC-DB-B3-D8-B2-A9"

(6)   Connect-Info = "CONNECT 54Mbps 802.11a"

(6)   Acct-Session-Id = "5AB3D033-0000007E"

(6)   Framed-MTU = 1400

(6)   EAP-Message = 0x022200061900

(6)   State = 0x0b4114500e630dc83a88292d3ebd9d32

(6)   Message-Authenticator = 0x6f95acdb80de2744da1abda59b7c7d00

(6) session-state: No cached attributes

(6) # Executing section authorize from file /etc/freeradius/sites-enabled/default

(6)   authorize {

(6)     policy filter_username {

(6)       if (&User-Name) {

(6)       if (&User-Name)  -> TRUE

(6)       if (&User-Name)  {

(6)         if (&User-Name =~ / /) {

(6)         if (&User-Name =~ / /)  -> FALSE

(6)         if (&User-Name =~ /@[^@]*@/ ) {

(6)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE

(6)         if (&User-Name =~ /\.\./ ) {

(6)         if (&User-Name =~ /\.\./ )  -> FALSE

(6)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {

(6)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE

(6)         if (&User-Name =~ /\.$/)  {

(6)         if (&User-Name =~ /\.$/)   -> FALSE

(6)         if (&User-Name =~ /@\./)  {

(6)         if (&User-Name =~ /@\./)   -> FALSE

(6)       } # if (&User-Name)  = notfound

(6)     } # policy filter_username = notfound

(6)     [preprocess] = ok

rlm_rest (rest): Reserved connection (5)

(6) rest: Expanding URI components

(6) rest: EXPAND http://127.0.0.1:38080

(6) rest:    --> http://127.0.0.1:38080

(6) rest: EXPAND /?user=%{User-Name}&mac=%{Called-Station-ID}&action=authorize

(6) rest:    --> /?user=testuser&mac=02-F0-21-36-26-47%3Aradtest&action=authorize

(6) rest: Sending HTTP GET to "http://127.0.0.1:38080/?user=testuser&mac=02-F0-21-36-26-47%3Aradtest&action..."

(6) rest: Processing response header

(6) rest:   Status : 200 (OK)

(6) rest: Parsing attribute "Cleartext-Password"

(6) rest: EXPAND xxx

(6) rest:    --> xxx

(6) rest: Cleartext-Password := "xxx"

rlm_rest (rest): Released connection (5)

(6)     [rest] = updated

(6) eap: Peer sent EAP Response (code 2) ID 34 length 6

(6) eap: Continuing tunnel setup

(6)     [eap] = ok

(6)   } # authorize = ok

(6) Found Auth-Type = eap

(6) # Executing group from file /etc/freeradius/sites-enabled/default

(6)   authenticate {

(6) eap: Expiring EAP session with state 0x0b4114500e630dc8

(6) eap: Finished EAP session with state 0x0b4114500e630dc8

(6) eap: Previous EAP request found for state 0x0b4114500e630dc8, released from the list

(6) eap: Peer sent packet with method EAP PEAP (25)

(6) eap: Calling submodule eap_peap to process data

(6) eap_peap: Continuing EAP-TLS

(6) eap_peap: Peer ACKed our handshake fragment.  handshake is finished

(6) eap_peap: [eaptls verify] = success

(6) eap_peap: [eaptls process] = success

(6) eap_peap: Session established.  Decoding tunneled attributes

(6) eap_peap: PEAP state TUNNEL ESTABLISHED

(6) eap: Sending EAP Request (code 1) ID 35 length 40

(6) eap: EAP session adding &reply:State = 0x0b4114500d620dc8

(6)     [eap] = handled

(6)   } # authenticate = handled

(6) Using Post-Auth-Type Challenge

(6) # Executing group from file /etc/freeradius/sites-enabled/default

(6)   Challenge { ... } # empty sub-section is ignored

(6) Sent Access-Challenge Id 132 from 172.31.26.65:1812 to 12.148.189.27:47323 length 0

(6)   EAP-Message = 0x012300281900170303001dc83609123255ee47337cf8325eb6ae05caf73c658aae48c000d2ad8d56

(6)   Message-Authenticator = 0x00000000000000000000000000000000

(6)   State = 0x0b4114500d620dc83a88292d3ebd9d32

(6) Finished request

Waking up in 4.4 seconds.

(7) Received Access-Request Id 133 from 12.148.189.27:47323 to 172.31.26.65:1812 length 225

(7)   User-Name = "testuser"

(7)   NAS-IP-Address = 127.0.0.1

(7)   Called-Station-Id = "02-F0-21-36-26-47:radtest"

(7)   NAS-Port-Type = Wireless-802.11

(7)   NAS-Port = 1

(7)   Calling-Station-Id = "FC-DB-B3-D8-B2-A9"

(7)   Connect-Info = "CONNECT 54Mbps 802.11a"

(7)   Acct-Session-Id = "5AB3D033-0000007E"

(7)   Framed-MTU = 1400

(7)   EAP-Message = 0x0223002c19001703030021000000000000000123fb52a39a9ba3daa863b4c366da5b3f610debdb7fe858fa28

(7)   State = 0x0b4114500d620dc83a88292d3ebd9d32

(7)   Message-Authenticator = 0xcf5511b77afd032948795887f43972d0

(7) session-state: No cached attributes

(7) # Executing section authorize from file /etc/freeradius/sites-enabled/default

(7)   authorize {

(7)     policy filter_username {

(7)       if (&User-Name) {

(7)       if (&User-Name)  -> TRUE

(7)       if (&User-Name)  {

(7)         if (&User-Name =~ / /) {

(7)         if (&User-Name =~ / /)  -> FALSE

(7)         if (&User-Name =~ /@[^@]*@/ ) {

(7)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE

(7)         if (&User-Name =~ /\.\./ ) {

(7)         if (&User-Name =~ /\.\./ )  -> FALSE

(7)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {

(7)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE

(7)         if (&User-Name =~ /\.$/)  {

(7)         if (&User-Name =~ /\.$/)   -> FALSE

(7)         if (&User-Name =~ /@\./)  {

(7)         if (&User-Name =~ /@\./)   -> FALSE

(7)       } # if (&User-Name)  = notfound

(7)     } # policy filter_username = notfound

(7)     [preprocess] = ok

rlm_rest (rest): Reserved connection (1)

(7) rest: Expanding URI components

(7) rest: EXPAND http://127.0.0.1:38080

(7) rest:    --> http://127.0.0.1:38080

(7) rest: EXPAND /?user=%{User-Name}&mac=%{Called-Station-ID}&action=authorize

(7) rest:    --> /?user=testuser&mac=02-F0-21-36-26-47%3Aradtest&action=authorize

(7) rest: Sending HTTP GET to "http://127.0.0.1:38080/?user=testuser&mac=02-F0-21-36-26-47%3Aradtest&action..."

(7) rest: Processing response header

(7) rest:   Status : 200 (OK)

(7) rest: Parsing attribute "Cleartext-Password"

(7) rest: EXPAND xxx

(7) rest:    --> xxx

(7) rest: Cleartext-Password := "xxx"

rlm_rest (rest): Released connection (1)

(7)     [rest] = updated

(7) eap: Peer sent EAP Response (code 2) ID 35 length 44

(7) eap: Continuing tunnel setup

(7)     [eap] = ok

(7)   } # authorize = ok

(7) Found Auth-Type = eap

(7) # Executing group from file /etc/freeradius/sites-enabled/default

(7)   authenticate {

(7) eap: Expiring EAP session with state 0x0b4114500d620dc8

(7) eap: Finished EAP session with state 0x0b4114500d620dc8

(7) eap: Previous EAP request found for state 0x0b4114500d620dc8, released from the list

(7) eap: Peer sent packet with method EAP PEAP (25)

(7) eap: Calling submodule eap_peap to process data

(7) eap_peap: Continuing EAP-TLS

(7) eap_peap: [eaptls verify] = ok

(7) eap_peap: Done initial handshake

(7) eap_peap: [eaptls process] = ok

(7) eap_peap: Session established.  Decoding tunneled attributes

(7) eap_peap: PEAP state WAITING FOR INNER IDENTITY

(7) eap_peap: Identity - testuser

(7) eap_peap: Got inner identity 'testuser'

(7) eap_peap: Got tunneled request

(7) eap_peap:   EAP-Message = 0x0223000d017465737475736572

(7) eap_peap: Setting User-Name to testuser

(7) eap_peap: Sending tunneled request to inner-tunnel

(7) eap_peap:   EAP-Message = 0x0223000d017465737475736572

(7) eap_peap:   FreeRADIUS-Proxied-To = 127.0.0.1

(7) eap_peap:   User-Name = "testuser"

(7) Virtual server inner-tunnel received request

(7)   EAP-Message = 0x0223000d017465737475736572

(7)   FreeRADIUS-Proxied-To = 127.0.0.1

(7)   User-Name = "testuser"

(7) WARNING: Outer and inner identities are the same.  User privacy is compromised.

(7) server inner-tunnel {

(7)   # Executing section authorize from file /etc/freeradius/sites-enabled/inner-tunnel

(7)     authorize {

(7)       policy filter_username {

(7)         if (&User-Name) {

(7)         if (&User-Name)  -> TRUE

(7)         if (&User-Name)  {

(7)           if (&User-Name =~ / /) {

(7)           if (&User-Name =~ / /)  -> FALSE

(7)           if (&User-Name =~ /@[^@]*@/ ) {

(7)           if (&User-Name =~ /@[^@]*@/ )  -> FALSE

(7)           if (&User-Name =~ /\.\./ ) {

(7)           if (&User-Name =~ /\.\./ )  -> FALSE

(7)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {

(7)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE

(7)           if (&User-Name =~ /\.$/)  {

(7)           if (&User-Name =~ /\.$/)   -> FALSE

(7)           if (&User-Name =~ /@\./)  {

(7)           if (&User-Name =~ /@\./)   -> FALSE

(7)         } # if (&User-Name)  = notfound

(7)       } # policy filter_username = notfound

(7)       [chap] = noop

(7) suffix: Checking for suffix after "@"

(7) suffix: No '@' in User-Name = "testuser", looking up realm NULL

(7) suffix: No such realm "NULL"

(7)       [suffix] = noop

(7)       update control {

(7)         &Proxy-To-Realm := LOCAL

(7)       } # update control = noop

(7) eap: Peer sent EAP Response (code 2) ID 35 length 13

(7) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize

(7)       [eap] = ok

(7)     } # authorize = ok

(7)   Found Auth-Type = eap

(7)   # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel

(7)     authenticate {

(7) eap: Peer sent packet with method EAP Identity (1)

(7) eap: Calling submodule eap_md5 to process data

(7) eap_md5: Issuing MD5 Challenge

(7) eap: Sending EAP Request (code 1) ID 36 length 22

(7) eap: EAP session adding &reply:State = 0x34c83c5534ec38aa

(7)       [eap] = handled

(7)     } # authenticate = handled

(7) } # server inner-tunnel

(7) Virtual server sending reply

(7)   EAP-Message = 0x012400160410de4bc2bc713235e79fa8f8d915b7056e

(7)   Message-Authenticator = 0x00000000000000000000000000000000

(7)   State = 0x34c83c5534ec38aaa95c3e3716dd9c6d

(7) eap_peap: Got tunneled reply code 11

(7) eap_peap:   EAP-Message = 0x012400160410de4bc2bc713235e79fa8f8d915b7056e

(7) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000

(7) eap_peap:   State = 0x34c83c5534ec38aaa95c3e3716dd9c6d

(7) eap_peap: Got tunneled reply RADIUS code 11

(7) eap_peap:   EAP-Message = 0x012400160410de4bc2bc713235e79fa8f8d915b7056e

(7) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000

(7) eap_peap:   State = 0x34c83c5534ec38aaa95c3e3716dd9c6d

(7) eap_peap: Got tunneled Access-Challenge

(7) eap: Sending EAP Request (code 1) ID 36 length 53

(7) eap: EAP session adding &reply:State = 0x0b4114500c650dc8

(7)     [eap] = handled

(7)   } # authenticate = handled

(7) Using Post-Auth-Type Challenge

(7) # Executing group from file /etc/freeradius/sites-enabled/default

(7)   Challenge { ... } # empty sub-section is ignored

(7) Sent Access-Challenge Id 133 from 172.31.26.65:1812 to 12.148.189.27:47323 length 0

(7)   EAP-Message = 0x012400351900170303002ac83609123255ee48f3ffc3b2fac0a1c8c6f932b32b5daa6523973c66e54fdad2dd4b44b7d269744240d7

(7)   Message-Authenticator = 0x00000000000000000000000000000000

(7)   State = 0x0b4114500c650dc83a88292d3ebd9d32

(7) Finished request

Waking up in 4.4 seconds.

(8) Received Access-Request Id 134 from 12.148.189.27:47323 to 172.31.26.65:1812 length 234

(8)   User-Name = "testuser"

(8)   NAS-IP-Address = 127.0.0.1

(8)   Called-Station-Id = "02-F0-21-36-26-47:radtest"

(8)   NAS-Port-Type = Wireless-802.11

(8)   NAS-Port = 1

(8)   Calling-Station-Id = "FC-DB-B3-D8-B2-A9"

(8)   Connect-Info = "CONNECT 54Mbps 802.11a"

(8)   Acct-Session-Id = "5AB3D033-0000007E"

(8)   Framed-MTU = 1400

(8)   EAP-Message = 0x022400351900170303002a00000000000000026d086d447448f6529b2f893a90cc8c4c56121f38a9b78ba1ae4fdfcec6312cca3780

(8)   State = 0x0b4114500c650dc83a88292d3ebd9d32

(8)   Message-Authenticator = 0x910a748b9b3e2eb9e5e0cae46f984304

(8) session-state: No cached attributes

(8) # Executing section authorize from file /etc/freeradius/sites-enabled/default

(8)   authorize {

(8)     policy filter_username {

(8)       if (&User-Name) {

(8)       if (&User-Name)  -> TRUE

(8)       if (&User-Name)  {

(8)         if (&User-Name =~ / /) {

(8)         if (&User-Name =~ / /)  -> FALSE

(8)         if (&User-Name =~ /@[^@]*@/ ) {

(8)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE

(8)         if (&User-Name =~ /\.\./ ) {

(8)         if (&User-Name =~ /\.\./ )  -> FALSE

(8)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {

(8)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE

(8)         if (&User-Name =~ /\.$/)  {

(8)         if (&User-Name =~ /\.$/)   -> FALSE

(8)         if (&User-Name =~ /@\./)  {

(8)         if (&User-Name =~ /@\./)   -> FALSE

(8)       } # if (&User-Name)  = notfound

(8)     } # policy filter_username = notfound

(8)     [preprocess] = ok

rlm_rest (rest): Reserved connection (2)

(8) rest: Expanding URI components

(8) rest: EXPAND http://127.0.0.1:38080

(8) rest:    --> http://127.0.0.1:38080

(8) rest: EXPAND /?user=%{User-Name}&mac=%{Called-Station-ID}&action=authorize

(8) rest:    --> /?user=testuser&mac=02-F0-21-36-26-47%3Aradtest&action=authorize

(8) rest: Sending HTTP GET to "http://127.0.0.1:38080/?user=testuser&mac=02-F0-21-36-26-47%3Aradtest&action..."

(8) rest: Processing response header

(8) rest:   Status : 200 (OK)

(8) rest: Parsing attribute "Cleartext-Password"

(8) rest: EXPAND xxx

(8) rest:    --> xxx

(8) rest: Cleartext-Password := "xxx"

rlm_rest (rest): Released connection (2)

Need 4 more connections to reach 10 spares

rlm_rest (rest): Opening additional connection (6), 1 of 26 pending slots used

rlm_rest (rest): Connecting to "http://127.0.0.1:38080/"

(8)     [rest] = updated

(8) eap: Peer sent EAP Response (code 2) ID 36 length 53

(8) eap: Continuing tunnel setup

(8)     [eap] = ok

(8)   } # authorize = ok

(8) Found Auth-Type = eap

(8) # Executing group from file /etc/freeradius/sites-enabled/default

(8)   authenticate {

(8) eap: Expiring EAP session with state 0x34c83c5534ec38aa

(8) eap: Finished EAP session with state 0x0b4114500c650dc8

(8) eap: Previous EAP request found for state 0x0b4114500c650dc8, released from the list

(8) eap: Peer sent packet with method EAP PEAP (25)

(8) eap: Calling submodule eap_peap to process data

(8) eap_peap: Continuing EAP-TLS

(8) eap_peap: [eaptls verify] = ok

(8) eap_peap: Done initial handshake

(8) eap_peap: [eaptls process] = ok

(8) eap_peap: Session established.  Decoding tunneled attributes

(8) eap_peap: PEAP state phase2

(8) eap_peap: EAP method MD5 (4)

(8) eap_peap: Got tunneled request

(8) eap_peap:   EAP-Message = 0x022400160410bbcfe2ccff99ffee87a3dd275e220fb2

(8) eap_peap: Setting User-Name to testuser

(8) eap_peap: Sending tunneled request to inner-tunnel

(8) eap_peap:   EAP-Message = 0x022400160410bbcfe2ccff99ffee87a3dd275e220fb2

(8) eap_peap:   FreeRADIUS-Proxied-To = 127.0.0.1

(8) eap_peap:   User-Name = "testuser"

(8) eap_peap:   State = 0x34c83c5534ec38aaa95c3e3716dd9c6d

(8) Virtual server inner-tunnel received request

(8)   EAP-Message = 0x022400160410bbcfe2ccff99ffee87a3dd275e220fb2

(8)   FreeRADIUS-Proxied-To = 127.0.0.1

(8)   User-Name = "testuser"

(8)   State = 0x34c83c5534ec38aaa95c3e3716dd9c6d

(8) WARNING: Outer and inner identities are the same.  User privacy is compromised.

(8) server inner-tunnel {

(8)   session-state: No cached attributes

(8)   # Executing section authorize from file /etc/freeradius/sites-enabled/inner-tunnel

(8)     authorize {

(8)       policy filter_username {

(8)         if (&User-Name) {

(8)         if (&User-Name)  -> TRUE

(8)         if (&User-Name)  {

(8)           if (&User-Name =~ / /) {

(8)           if (&User-Name =~ / /)  -> FALSE

(8)           if (&User-Name =~ /@[^@]*@/ ) {

(8)           if (&User-Name =~ /@[^@]*@/ )  -> FALSE

(8)           if (&User-Name =~ /\.\./ ) {

(8)           if (&User-Name =~ /\.\./ )  -> FALSE

(8)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {

(8)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE

(8)           if (&User-Name =~ /\.$/)  {

(8)           if (&User-Name =~ /\.$/)   -> FALSE

(8)           if (&User-Name =~ /@\./)  {

(8)           if (&User-Name =~ /@\./)   -> FALSE

(8)         } # if (&User-Name)  = notfound

(8)       } # policy filter_username = notfound

(8)       [chap] = noop

(8) suffix: Checking for suffix after "@"

(8) suffix: No '@' in User-Name = "testuser", looking up realm NULL

(8) suffix: No such realm "NULL"

(8)       [suffix] = noop

(8)       update control {

(8)         &Proxy-To-Realm := LOCAL

(8)       } # update control = noop

(8) eap: Peer sent EAP Response (code 2) ID 36 length 22

(8) eap: No EAP Start, assuming it's an on-going EAP conversation

(8)       [eap] = updated

(8)       [files] = noop

(8)       [expiration] = noop

(8)       [logintime] = noop

(8)       [pap] = noop

(8)     } # authorize = updated

(8)   Found Auth-Type = eap

(8)   # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel

(8)     authenticate {

(8) eap: Expiring EAP session with state 0x34c83c5534ec38aa

(8) eap: Finished EAP session with state 0x34c83c5534ec38aa

(8) eap: Previous EAP request found for state 0x34c83c5534ec38aa, released from the list

(8) eap: Peer sent packet with method EAP MD5 (4)

(8) eap: Calling submodule eap_md5 to process data

(8) eap_md5: ERROR: Cleartext-Password is required for EAP-MD5 authentication

(8) eap: ERROR: Failed continuing EAP MD5 (4) session.  EAP sub-module failed

(8) eap: Sending EAP Failure (code 4) ID 36 length 4

(8) eap: Failed in EAP select

(8)       [eap] = invalid

(8)     } # authenticate = invalid

(8)   Failed to authenticate the user

(8)   Using Post-Auth-Type Reject

(8)   # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel

(8)     Post-Auth-Type REJECT {

(8) attr_filter.access_reject: EXPAND %{User-Name}

(8) attr_filter.access_reject:    --> testuser

(8) attr_filter.access_reject: Matched entry DEFAULT at line 11

(8)       [attr_filter.access_reject] = updated

(8)       update outer.session-state {

(8)         &Module-Failure-Message := &request:Module-Failure-Message -> 'eap_md5: Cleartext-Password is required for EAP-MD5 authentication'

(8)       } # update outer.session-state = noop

(8)     } # Post-Auth-Type REJECT = updated

(8) } # server inner-tunnel

(8) Virtual server sending reply

(8)   EAP-Message = 0x04240004

(8)   Message-Authenticator = 0x00000000000000000000000000000000

(8) eap_peap: Got tunneled reply code 3

(8) eap_peap:   EAP-Message = 0x04240004

(8) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000

(8) eap_peap: Got tunneled reply RADIUS code 3

(8) eap_peap:   EAP-Message = 0x04240004

(8) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000

(8) eap_peap: Tunneled authentication was rejected

(8) eap_peap: FAILURE

(8) eap: Sending EAP Request (code 1) ID 37 length 46

(8) eap: EAP session adding &reply:State = 0x0b41145003640dc8

(8)     [eap] = handled

(8)   } # authenticate = handled

(8) Using Post-Auth-Type Challenge

(8) # Executing group from file /etc/freeradius/sites-enabled/default

(8)   Challenge { ... } # empty sub-section is ignored

(8) session-state: Saving cached attributes

(8)   Module-Failure-Message := "eap_md5: Cleartext-Password is required for EAP-MD5 authentication"

(8) Sent Access-Challenge Id 134 from 172.31.26.65:1812 to 12.148.189.27:47323 length 0

(8)   EAP-Message = 0x0125002e19001703030023c83609123255ee49c077598dddc774c14f97e733731d2b55da70b4625069fa1af46e38

(8)   Message-Authenticator = 0x00000000000000000000000000000000

(8)   State = 0x0b41145003640dc83a88292d3ebd9d32

(8) Finished request

Waking up in 4.3 seconds.

(9) Received Access-Request Id 135 from 12.148.189.27:47323 to 172.31.26.65:1812 length 227

(9)   User-Name = "testuser"

(9)   NAS-IP-Address = 127.0.0.1

(9)   Called-Station-Id = "02-F0-21-36-26-47:radtest"

(9)   NAS-Port-Type = Wireless-802.11

(9)   NAS-Port = 1

(9)   Calling-Station-Id = "FC-DB-B3-D8-B2-A9"

(9)   Connect-Info = "CONNECT 54Mbps 802.11a"

(9)   Acct-Session-Id = "5AB3D033-0000007E"

(9)   Framed-MTU = 1400

(9)   EAP-Message = 0x0225002e1900170303002300000000000000031923d42e02f9147c6a5beb55ea462fe2a0fd65953a332bb02322e1

(9)   State = 0x0b41145003640dc83a88292d3ebd9d32

(9)   Message-Authenticator = 0x1b4109be566f43a6f4e0ccef2ae09272

(9) Restoring &session-state

(9)   &session-state:Module-Failure-Message := "eap_md5: Cleartext-Password is required for EAP-MD5 authentication"

(9) # Executing section authorize from file /etc/freeradius/sites-enabled/default

(9)   authorize {

(9)     policy filter_username {

(9)       if (&User-Name) {

(9)       if (&User-Name)  -> TRUE

(9)       if (&User-Name)  {

(9)         if (&User-Name =~ / /) {

(9)         if (&User-Name =~ / /)  -> FALSE

(9)         if (&User-Name =~ /@[^@]*@/ ) {

(9)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE

(9)         if (&User-Name =~ /\.\./ ) {

(9)         if (&User-Name =~ /\.\./ )  -> FALSE

(9)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {

(9)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE

(9)         if (&User-Name =~ /\.$/)  {

(9)         if (&User-Name =~ /\.$/)   -> FALSE

(9)         if (&User-Name =~ /@\./)  {

(9)         if (&User-Name =~ /@\./)   -> FALSE

(9)       } # if (&User-Name)  = notfound

(9)     } # policy filter_username = notfound

(9)     [preprocess] = ok

rlm_rest (rest): Reserved connection (3)

(9) rest: Expanding URI components

(9) rest: EXPAND http://127.0.0.1:38080

(9) rest:    --> http://127.0.0.1:38080

(9) rest: EXPAND /?user=%{User-Name}&mac=%{Called-Station-ID}&action=authorize

(9) rest:    --> /?user=testuser&mac=02-F0-21-36-26-47%3Aradtest&action=authorize

(9) rest: Sending HTTP GET to "http://127.0.0.1:38080/?user=testuser&mac=02-F0-21-36-26-47%3Aradtest&action..."

(9) rest: Processing response header

(9) rest:   Status : 200 (OK)

(9) rest: Parsing attribute "Cleartext-Password"

(9) rest: EXPAND xxx

(9) rest:    --> xxx

(9) rest: Cleartext-Password := "xxx"

rlm_rest (rest): Released connection (3)

(9)     [rest] = updated

(9) eap: Peer sent EAP Response (code 2) ID 37 length 46

(9) eap: Continuing tunnel setup

(9)     [eap] = ok

(9)   } # authorize = ok

(9) Found Auth-Type = eap

(9) # Executing group from file /etc/freeradius/sites-enabled/default

(9)   authenticate {

(9) eap: Expiring EAP session with state 0x0b41145003640dc8

(9) eap: Finished EAP session with state 0x0b41145003640dc8

(9) eap: Previous EAP request found for state 0x0b41145003640dc8, released from the list

(9) eap: Peer sent packet with method EAP PEAP (25)

(9) eap: Calling submodule eap_peap to process data

(9) eap_peap: Continuing EAP-TLS

(9) eap_peap: [eaptls verify] = ok

(9) eap_peap: Done initial handshake

(9) eap_peap: [eaptls process] = ok

(9) eap_peap: Session established.  Decoding tunneled attributes

(9) eap_peap: PEAP state send tlv failure

(9) eap_peap: Received EAP-TLV response

(9) eap_peap:   ERROR: The users session was previously rejected: returning reject (again.)

(9) eap_peap:   This means you need to read the PREVIOUS messages in the debug output

(9) eap_peap:   to find out the reason why the user was rejected

(9) eap_peap:   Look for "reject" or "fail".  Those earlier messages will tell you

(9) eap_peap:   what went wrong, and how to fix the problem

(9) eap: ERROR: Failed continuing EAP PEAP (25) session.  EAP sub-module failed

(9) eap: Sending EAP Failure (code 4) ID 37 length 4

(9) eap: Failed in EAP select

(9)     [eap] = invalid

(9)   } # authenticate = invalid

(9) Failed to authenticate the user

(9) Using Post-Auth-Type Reject

(9) # Executing group from file /etc/freeradius/sites-enabled/default

(9)   Post-Auth-Type REJECT {

(9) attr_filter.access_reject: EXPAND %{User-Name}

(9) attr_filter.access_reject:    --> testuser

(9) attr_filter.access_reject: Matched entry DEFAULT at line 11

(9)     [attr_filter.access_reject] = updated

(9)     [eap] = noop

(9)     policy remove_reply_message_if_eap {

(9)       if (&reply:EAP-Message && &reply:Reply-Message) {

(9)       if (&reply:EAP-Message && &reply:Reply-Message)  -> FALSE

(9)       else {

(9)         [noop] = noop

(9)       } # else = noop

(9)     } # policy remove_reply_message_if_eap = noop

(9)   } # Post-Auth-Type REJECT = updated

(9) Delaying response for 1.000000 seconds

Waking up in 0.3 seconds.

Waking up in 0.6 seconds.

(9) Sending delayed response

(9) Sent Access-Reject Id 135 from 172.31.26.65:1812 to 12.148.189.27:47323 length 44

(9)   EAP-Message = 0x04250004

(9)   Message-Authenticator = 0x00000000000000000000000000000000

Waking up in 3.2 seconds.

(0) Cleaning up request packet ID 126 with timestamp +16

(1) Cleaning up request packet ID 127 with timestamp +16

(2) Cleaning up request packet ID 128 with timestamp +16

(3) Cleaning up request packet ID 129 with timestamp +16

(4) Cleaning up request packet ID 130 with timestamp +16

(5) Cleaning up request packet ID 131 with timestamp +16

(6) Cleaning up request packet ID 132 with timestamp +16

(7) Cleaning up request packet ID 133 with timestamp +16

(8) Cleaning up request packet ID 134 with timestamp +17

(9) Cleaning up request packet ID 135 with timestamp +17

Ready to process requests

Ready to process requests

Signalled to terminate

Exiting normally

rlm_rest (rest): Removing connection pool

rlm_rest (rest): Closing connection (6)

rlm_rest (rest): Closing connection (5)

rlm_rest (rest): Closing connection (4)

rlm_rest (rest): Closing connection (3)

rlm_rest (rest): Closing connection (2)

rlm_rest (rest): Closing connection (1)

rlm_rest (rest): Closing connection (0)

Authentication and Rest

Gelinas, Robert