Alan, you are misunderstanding my question. The binding currently is happening by root and is successful. The second phase (authenticate) by the end user does not succeed. The user laurence has correct access rights otherwise he would not be able to login/ssh etc. Authorize works, the authenticate of the user does not work. I am trying to understand why despite the binding happening by root, the user cannot authenticate. Thanks again. Laurence Starting - reading configuration files ... reread_config: reading radiusd.conf Config: including file: /etc/raddb/proxy.conf Config: including file: /etc/raddb/clients.conf Config: including file: /etc/raddb/snmp.conf Config: including file: /etc/raddb/eap.conf main: prefix = "/usr" main: localstatedir = "/var" main: logdir = "/var/log/radius" main: libdir = "/usr/lib64" main: radacctdir = "/var/log/radius/radacct" main: hostname_lookups = no main: snmp = no main: max_request_time = 30 main: cleanup_delay = 5 main: max_requests = 1024 main: delete_blocked_requests = 0 main: port = 0 main: allow_core_dumps = no main: log_stripped_names = no main: log_file = "/var/log/radius/radius.log" main: log_auth = no main: log_auth_badpass = no main: log_auth_goodpass = no main: pidfile = "/var/run/radiusd/radiusd.pid" main: user = "radiusd" main: group = "radiusd" main: usercollide = no main: lower_user = "no" main: lower_pass = "no" main: nospace_user = "no" main: nospace_pass = "no" main: checkrad = "/usr/sbin/checkrad" main: proxy_requests = yes proxy: retry_delay = 5 proxy: retry_count = 3 proxy: synchronous = no proxy: default_fallback = yes proxy: dead_time = 120 proxy: post_proxy_authorize = no proxy: wake_all_if_all_dead = no security: max_attributes = 200 security: reject_delay = 1 security: status_server = no main: debug_level = 0 read_config_files: reading dictionary read_config_files: reading naslist Using deprecated naslist file. Support for this will go away soon. read_config_files: reading clients read_config_files: reading realms radiusd: entering modules setup Module: Library search path is /usr/lib64 Module: Loaded exec exec: wait = yes exec: program = "(null)" exec: input_pairs = "request" exec: output_pairs = "(null)" exec: packet_type = "(null)" rlm_exec: Wait=yes but no output defined. Did you mean output=none? Module: Instantiated exec (exec) Module: Loaded expr Module: Instantiated expr (expr) Module: Loaded PAP pap: encryption_scheme = "crypt" Module: Instantiated pap (pap) Module: Loaded CHAP Module: Instantiated chap (chap) Module: Loaded MS-CHAP mschap: use_mppe = yes mschap: require_encryption = no mschap: require_strong = no mschap: with_ntdomain_hack = no mschap: passwd = "(null)" mschap: ntlm_auth = "(null)" Module: Instantiated mschap (mschap) Module: Loaded Pam pam: pam_auth = "radiusd" Module: Instantiated pam (pam) Module: Loaded System unix: cache = no unix: passwd = "(null)" unix: shadow = "/etc/shadow" unix: group = "(null)" unix: radwtmp = "/var/log/radius/radwtmp" unix: usegroup = no unix: cache_reload = 600 Module: Instantiated unix (unix) Module: Loaded LDAP ldap: server = "127.0.0.1" ldap: port = 389 ldap: net_timeout = 1 ldap: timeout = 4 ldap: timelimit = 3 ldap: identity = "cn=root,dc=istraresearch,dc=com" ldap: tls_mode = no ldap: start_tls = no ldap: tls_cacertfile = "(null)" ldap: tls_cacertdir = "(null)" ldap: tls_certfile = "(null)" ldap: tls_keyfile = "(null)" ldap: tls_randfile = "(null)" ldap: tls_require_cert = "allow" ldap: password = "xxxx" ldap: basedn = "ou=People,dc=istraresearch,dc=com" ldap: filter = "(&(objectClass=inetOrgPerson)(uid=%{Stripped-User-Name:-%{User-Name}}))" ldap: base_filter = "(objectclass=radiusprofile)" ldap: default_profile = "(null)" ldap: profile_attribute = "(null)" ldap: password_header = "{crypt}" ldap: password_attribute = "userPassword" ldap: access_attr = "(null)" ldap: groupname_attribute = "cn" ldap: groupmembership_filter = "(|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))" ldap: groupmembership_attribute = "(null)" ldap: dictionary_mapping = "/etc/raddb/ldap.attrmap" ldap: ldap_debug = 0 ldap: ldap_connections_number = 5 ldap: compare_check_items = no ldap: access_attr_used_for_allow = yes ldap: do_xlat = yes ldap: set_auth_type = yes rlm_ldap: Registering ldap_groupcmp for Ldap-Group rlm_ldap: Registering ldap_xlat with xlat_name ldap rlm_ldap: reading ldap<->radius mappings from file /etc/raddb/ldap.attrmap rlm_ldap: LDAP userPassword mapped to RADIUS User-Password rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS Calling-Station-Id rlm_ldap: LDAP sambaLMPassword mapped to RADIUS LM-Password rlm_ldap: LDAP sambaNTPassword mapped to RADIUS NT-Password rlm_ldap: LDAP sambaAcctFlags mapped to RADIUS SMB-Account-CTRL-TEXT rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration rlm_ldap: LDAP radiusNASIpAddress mapped to RADIUS NAS-IP-Address rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS Framed-Compression rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS Framed-IPX-Network rlm_ldap: LDAP radiusClass mapped to RADIUS Class rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS Termination-Action rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS Framed-AppleTalk-Link rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS Framed-AppleTalk-Network rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS Framed-AppleTalk-Zone rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port rlm_ldap: LDAP radiusReplyMessage mapped to RADIUS Reply-Message conns: 0x2ba784ccd340 Module: Instantiated ldap (ldap) Module: Loaded eap eap: default_eap_type = "md5" eap: timer_expire = 60 eap: ignore_unknown_eap_types = no eap: cisco_accounting_username_bug = no rlm_eap: Loaded and initialized type md5 rlm_eap: Loaded and initialized type leap gtc: challenge = "Password: " gtc: auth_type = "PAP" rlm_eap: Loaded and initialized type gtc mschapv2: with_ntdomain_hack = no rlm_eap: Loaded and initialized type mschapv2 Module: Instantiated eap (eap) Module: Loaded preprocess preprocess: huntgroups = "/etc/raddb/huntgroups" preprocess: hints = "/etc/raddb/hints" preprocess: with_ascend_hack = no preprocess: ascend_channels_per_line = 23 preprocess: with_ntdomain_hack = no preprocess: with_specialix_jetstream_hack = no preprocess: with_cisco_vsa_hack = no preprocess: with_alvarion_vsa_hack = no Module: Instantiated preprocess (preprocess) Module: Loaded realm realm: format = "suffix" realm: delimiter = "@" realm: ignore_default = no realm: ignore_null = no Module: Instantiated realm (suffix) Module: Loaded files files: usersfile = "/etc/raddb/users" files: acctusersfile = "/etc/raddb/acct_users" files: preproxy_usersfile = "/etc/raddb/preproxy_users" files: compat = "no" Module: Instantiated files (files) Module: Loaded Acct-Unique-Session-Id acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" Module: Instantiated acct_unique (acct_unique) Module: Loaded detail detail: detailfile = "/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" detail: detailperm = 384 detail: dirperm = 493 detail: locking = no Module: Instantiated detail (detail) Module: Loaded radutmp radutmp: filename = "/var/log/radius/radutmp" radutmp: username = "%{User-Name}" radutmp: case_sensitive = yes radutmp: check_with_nas = yes radutmp: perm = 384 radutmp: callerid = yes Module: Instantiated radutmp (radutmp) Listening on authentication *:1812 Listening on accounting *:1813 Ready to process requests. rad_recv: Access-Request packet from host 172.16.16.55:34583, id=49, length=60 User-Name = "laurence" User-Password = "xxxx" NAS-IP-Address = 255.255.255.255 NAS-Port = 1 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 0 modcall[authorize]: module "preprocess" returns ok for request 0 modcall[authorize]: module "chap" returns noop for request 0 modcall[authorize]: module "mschap" returns noop for request 0 rlm_realm: No '@' in User-Name = "laurence", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 0 rlm_eap: No EAP-Message, not doing EAP modcall[authorize]: module "eap" returns noop for request 0 users: Matched entry DEFAULT at line 153 users: Matched entry DEFAULT at line 157 modcall[authorize]: module "files" returns ok for request 0 rlm_ldap: - authorize rlm_ldap: performing user authorization for laurence radius_xlat: '(&(objectClass=inetOrgPerson)(uid=laurence))' radius_xlat: 'ou=People,dc=istraresearch,dc=com' rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: attempting LDAP reconnection rlm_ldap: (re)connect to 127.0.0.1:389, authentication 0 rlm_ldap: could not set LDAP_OPT_X_TLS_REQUIRE_CERT option to allow rlm_ldap: bind as cn=root,dc=istraresearch,dc=com/xxxx to 127.0.0.1:389 rlm_ldap: waiting for bind result ... rlm_ldap: Bind was successful rlm_ldap: performing search in ou=People,dc=istraresearch,dc=com, with filter (&(objectClass=inetOrgPerson)(uid=laurence)) rlm_ldap: looking for check items in directory... rlm_ldap: looking for reply items in directory... rlm_ldap: user laurence authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 modcall[authorize]: module "ldap" returns ok for request 0 modcall: leaving group authorize (returns ok) for request 0 rad_check_password: Found Auth-Type LDAP auth: type "LDAP" Processing the authenticate section of radiusd.conf modcall: entering group LDAP for request 0 rlm_ldap: - authenticate rlm_ldap: login attempt by "laurence" with password "xxxx" rlm_ldap: user DN: cn=Laurence Mayer,ou=people,dc=istraresearch,dc=com rlm_ldap: (re)connect to 127.0.0.1:389, authentication 1 rlm_ldap: could not set LDAP_OPT_X_TLS_REQUIRE_CERT option to allow rlm_ldap: bind as cn=Laurence Mayer,ou=people,dc=istraresearch,dc=com/xxxx to 127.0.0.1:389 rlm_ldap: waiting for bind result ... rlm_ldap: Bind failed with invalid credentials modcall[authenticate]: module "ldap" returns reject for request 0 modcall: leaving group LDAP (returns reject) for request 0 auth: Failed to validate the user. Delaying request 0 for 1 seconds Finished request 0 Going to the next request --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Sending Access-Reject of id 49 to 172.16.16.55 port 34583 Waking up in 4 seconds... --- Walking the entire request list --- Cleaning up request 0 ID 49 with timestamp 48bba090 Nothing to do. Sleeping until we see a request. A.L.M.Buxey@lboro.ac.uk wrote:
Hi,
If I understand this correctly, each user who would like to authenticated would require those access rights and not only laurence?
no. you dont use the login user to do the binding, you use a special user. for testing, you can use root, but for production I'd advice to use a special account that has almost the same level as root - but without eg delete and make credentials.
no further support on this from me as its not FreeRADIUS, its LDAP - go and ask on LDAP lists.
alan - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
-- -------------------------- Laurence Mayer Director of Operations & IT Istra Research Ltd. Tel: +972545233107 Fax: +972722765124