Hello, can some please help. Hello, we have a strange problem with the PEAP MSCHAP authentication truh WLAN. We use freeradius 1.1.7 on debian etch. 1. If we auth a ActiveDirectory User with automatic sending of username and password to our wlan everthing is OK. No lan-cabel is connected. In my case the Username is DOMAIN\\GroozMarc. 2. If we auth the same user with a lan-cabel connected. the auth fails. In this case the Username is DOMAIN\\groozmarc 3. If we auth the user without automatic sending of username and password and enter DOMAIN\\groozmarc and have lan connected everthing fine. Her is an output from case 2: rad_recv: Access-Request packet from host x , id=11, length=303 User-Name = "DOMAIN\\groozmarc" Calling-Station-Id = "x" Called-Station-Id = "x" NAS-Port = 2 NAS-IP-Address = x NAS-Identifier = "x" Airespace-Wlan-Id = 1 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "27" EAP-Message = 0x020a006a1900170301005fca5e86c4de36db061ffe1fc7f358599fa78cd53e221d2899 73525b8ed1328424653bad8e457757c9ae67d167a60b6 0585b1c37d22ed1377e9ed39b37901e7cf213d6a306ef154326ca0f6c2aad68111681c24 4b1523668e9effcfd97e1a216 State = 0xc1c18b62ee37419ada28a725693523d4 Message-Authenticator = 0x8dd2ca9d8fc2a09f7dcaef11b100f2c6 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 39 modcall[authorize]: module "preprocess" returns ok for request 39 modcall[authorize]: module "chap" returns noop for request 39 modcall[authorize]: module "mschap" returns noop for request 39 rlm_realm: No '@' in User-Name = "DOMAIN\groozmarc", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 39 rlm_eap: EAP packet type response id 10 length 106 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 39 users: Matched entry DEFAULT at line 152 users: Matched entry DEFAULT at line 171 modcall[authorize]: module "files" returns ok for request 39 rlm_pap: WARNING! No "known good" password found for the user. Authentication may fail because of this. modcall[authorize]: module "pap" returns noop for request 39 modcall: leaving group authorize (returns updated) for request 39 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 39 rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS eaptls_verify returned 7 rlm_eap_tls: Done initial handshake eaptls_process returned 7 rlm_eap_peap: EAPTLS_OK rlm_eap_peap: Session established. Decoding tunneled attributes. rlm_eap_peap: EAP type mschapv2 rlm_eap_peap: Tunneled data is valid. PEAP: Got tunneled EAP-Message EAP-Message = 0x020a00531a020a004e310d11f40d775fc5fcb45ad88a7c4435830000000000000000b8 28c2bcb15e3c9ddaba50c2e6933328d1849c510dc9251 000524547494f49542d41414348454e5c47726f6f7a4d617263 PEAP: Setting User-Name to DOMAIN\groozmarc PEAP: Adding old state with 6a 6f PEAP: Sending tunneled request EAP-Message = 0x020a00531a020a004e310d11f40d775fc5fcb45ad88a7c4435830000000000000000b8 28c2bcb15e3c9ddaba50c2e6933328d1849c510dc9251 000524547494f49542d41414348454e5c47726f6f7a4d617263 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "DOMAIN\\groozmarc" State = 0x6a6f2590246560c8fdcd054d188cbb3f Processing the authorize section of radiusd.conf modcall: entering group authorize for request 39 modcall[authorize]: module "preprocess" returns ok for request 39 modcall[authorize]: module "chap" returns noop for request 39 modcall[authorize]: module "mschap" returns noop for request 39 rlm_realm: No '@' in User-Name = "DOMAIN\groozmarc", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 39 rlm_eap: EAP packet type response id 10 length 83 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 39 users: Matched entry DEFAULT at line 152 modcall[authorize]: module "files" returns ok for request 39 rlm_pap: WARNING! No "known good" password found for the user. Authentication may fail because of this. modcall[authorize]: module "pap" returns noop for request 39 modcall: leaving group authorize (returns updated) for request 39 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 39 rlm_eap: Request found, released from the list rlm_eap: EAP/mschapv2 rlm_eap: processing type mschapv2 Processing the authenticate section of radiusd.conf modcall: entering group MS-CHAP for request 39 rlm_mschap: No User-Password configured. Cannot create LM-Password. rlm_mschap: No User-Password configured. Cannot create NT-Password. rlm_mschap: Told to do MS-CHAPv2 for groozmarc with NT-Password radius_xlat: Running registered xlat function of module mschap for string 'NT-Domain' radius_xlat: '--domain=DOMAIN' radius_xlat: Running registered xlat function of module mschap for string 'User-Name' radius_xlat: '--username=groozmarc' radius_xlat: Running registered xlat function of module mschap for string 'Challenge' mschap2: e9 radius_xlat: '--challenge=d5ab398544877442' radius_xlat: Running registered xlat function of module mschap for string 'NT-Response' radius_xlat: '--nt-response=b828c2bcb15e3c9ddaba50c2e6933328d1849c510dc92510' Exec-Program output: Logon failure (0xc000006d) Exec-Program-Wait: plaintext: Logon failure (0xc000006d) Exec-Program: returned: 1 rlm_mschap: External script failed. rlm_mschap: FAILED: MS-CHAP2-Response is incorrect modcall[authenticate]: module "mschap" returns reject for request 39 modcall: leaving group MS-CHAP (returns reject) for request 39 rlm_eap: Freeing handler modcall[authenticate]: module "eap" returns reject for request 39 modcall: leaving group authenticate (returns reject) for request 39 auth: Failed to validate the user. Login incorrect (rlm_mschap: Logon failure (0xc000006d)): [DOMAIN\\groozmarc/<no User-Password attribute>] (from client localhost p ort 0) PEAP: Got tunneled reply RADIUS code 3 MS-CHAP-Error = "\nE=691 R=1" EAP-Message = 0x040a0004 Message-Authenticator = 0x00000000000000000000000000000000 PEAP: Processing from tunneled session code 0x80148570 3 MS-CHAP-Error = "\nE=691 R=1" EAP-Message = 0x040a0004 Message-Authenticator = 0x00000000000000000000000000000000 PEAP: Tunneled authentication was rejected. rlm_eap_peap: FAILURE modcall[authenticate]: module "eap" returns handled for request 39 modcall: leaving group authenticate (returns handled) for request 39 hope you can help. thanks! Kind regards Marc Grooz