4 Dec
2010
4 Dec
'10
5:16 a.m.
Rangel, Luciano wrote:
I Success authentication but the switch not assign vlan 200 to client port as log below:
*Why the switch taking the VLAN 0?*
Because the switch is ignoring the VLAN in the Access-Request.
PS. I tested sending attribute with Cisco ACS and ran
There's no magic here. Look at the Access-Request from ACS. It's different than the Access-Request from FreeRADIUS. So... make FreeRADIUS send the same attributes in the Access-Request. It *will* work. Alan DeKok.