How setup simultaneous-use?

10 Oct 2023

      Hi,

I need to block multiple connections for users and  i need help to setup the
"Simultaneous-Use" with SQL. 

I see around forums, the documentation and others communities for help to
config this atribute, and i dont has no more ideas.

Table radcheck:

+----+----------+--------------------+----+--------------+
| id | username | attribute          | op | value        |
+----+----------+--------------------+----+--------------+
|  1 | allan    | Cleartext-Password | := | teste1234    |
+----+----------+--------------------+----+--------------+

Table radusergroup:
+----+----------+-----------+----------+
| id | username | groupname | priority |
+----+----------+-----------+----------+
|  1 | allan    | wifi      |        1 |
+----+----------+-----------+----------+

Table radgroupcheck:
+----+-----------+------------------+----+-------+
| id | groupname | attribute        | op | value |
+----+-----------+------------------+----+-------+
|  1 | wifi      | Simultaneous-Use | := | 1     |
+----+-----------+------------------+----+-------+

FreeRADIUS Version 3.2.1
Copyright (C) 1999-2022 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/freeradius/3.0/dictionary
including configuration file /etc/freeradius/3.0/radiusd.conf
including configuration file /etc/freeradius/3.0/proxy.conf
including configuration file /etc/freeradius/3.0/clients.conf
including files in directory /etc/freeradius/3.0/mods-enabled/
including configuration file /etc/freeradius/3.0/mods-enabled/eap
including configuration file
/etc/freeradius/3.0/mods-enabled/dynamic_clients
including configuration file /etc/freeradius/3.0/mods-enabled/detail
including configuration file /etc/freeradius/3.0/mods-enabled/echo
including configuration file /etc/freeradius/3.0/mods-enabled/preprocess
including configuration file /etc/freeradius/3.0/mods-enabled/radutmp
including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth
including configuration file /etc/freeradius/3.0/mods-enabled/digest
including configuration file /etc/freeradius/3.0/mods-enabled/expiration
including configuration file /etc/freeradius/3.0/mods-enabled/pap
including configuration file /etc/freeradius/3.0/mods-enabled/logintime
including configuration file /etc/freeradius/3.0/mods-enabled/chap
including configuration file /etc/freeradius/3.0/mods-enabled/unpack
including configuration file /etc/freeradius/3.0/mods-enabled/replicate
including configuration file /etc/freeradius/3.0/mods-enabled/utf8
including configuration file /etc/freeradius/3.0/mods-enabled/sql
including configuration file
/etc/freeradius/3.0/mods-config/sql/main/mysql/queries.conf
including configuration file /etc/freeradius/3.0/mods-enabled/always
including configuration file /etc/freeradius/3.0/mods-enabled/unix
including configuration file /etc/freeradius/3.0/mods-enabled/realm
including configuration file /etc/freeradius/3.0/mods-enabled/files
including configuration file /etc/freeradius/3.0/mods-enabled/exec
including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp
including configuration file /etc/freeradius/3.0/mods-enabled/mschap
including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter
including configuration file /etc/freeradius/3.0/mods-enabled/linelog
including configuration file /etc/freeradius/3.0/mods-enabled/passwd
including configuration file /etc/freeradius/3.0/mods-enabled/detail.log
including configuration file /etc/freeradius/3.0/mods-enabled/soh
including configuration file /etc/freeradius/3.0/mods-enabled/expr
including files in directory /etc/freeradius/3.0/policy.d/
including configuration file /etc/freeradius/3.0/policy.d/eap
including configuration file /etc/freeradius/3.0/policy.d/dhcp
including configuration file
/etc/freeradius/3.0/policy.d/moonshot-targeted-ids
including configuration file /etc/freeradius/3.0/policy.d/debug
including configuration file /etc/freeradius/3.0/policy.d/abfab-tr
including configuration file /etc/freeradius/3.0/policy.d/rfc7542
including configuration file /etc/freeradius/3.0/policy.d/cui
including configuration file /etc/freeradius/3.0/policy.d/filter
including configuration file /etc/freeradius/3.0/policy.d/operator-name
including configuration file /etc/freeradius/3.0/policy.d/canonicalization
including configuration file /etc/freeradius/3.0/policy.d/control
including configuration file /etc/freeradius/3.0/policy.d/accounting
including files in directory /etc/freeradius/3.0/sites-enabled/
including configuration file /etc/freeradius/3.0/sites-enabled/inner-tunnel
including configuration file /etc/freeradius/3.0/sites-enabled/default
main {
 security {
 	user = "freerad"
 	group = "freerad"
 	allow_core_dumps = no
 }
	name = "freeradius"
	prefix = "/usr"
	localstatedir = "/var"
	logdir = "/var/log/freeradius"
	run_dir = "/var/run/freeradius"
}
main {
	name = "freeradius"
	prefix = "/usr"
	localstatedir = "/var"
	sbindir = "/usr/sbin"
	logdir = "/var/log/freeradius"
	run_dir = "/var/run/freeradius"
	libdir = "/usr/lib/freeradius"
	radacctdir = "/var/log/freeradius/radacct"
	hostname_lookups = no
	max_request_time = 30
	cleanup_delay = 5
	max_requests = 16384
	postauth_client_lost = no
	pidfile = "/var/run/freeradius/freeradius.pid"
	checkrad = "/usr/sbin/checkrad"
	debug_level = 0
	proxy_requests = yes
 log {
 	stripped_names = no
 	auth = no
 	auth_badpass = no
 	auth_goodpass = no
 	colourise = yes
 	msg_denied = "You are already logged in - access denied"
 }
 resources {
 }
 security {
 	max_attributes = 200
 	reject_delay = 1.000000
 	status_server = yes
 }
}
radiusd: #### Loading Realms and Home Servers ####
 proxy server {
 	retry_delay = 5
 	retry_count = 3
 	default_fallback = no
 	dead_time = 120
 	wake_all_if_all_dead = no
 }
 home_server localhost {
 	ipaddr = 127.0.0.1
 	port = 1812
 	type = "auth"
 	secret = <<< secret >>>
 	response_window = 20.000000
 	response_timeouts = 1
 	max_outstanding = 65536
 	zombie_period = 40
 	status_check = "status-server"
 	ping_interval = 30
 	check_interval = 30
 	check_timeout = 4
 	num_answers_to_alive = 3
 	revive_interval = 120
  limit {
  	max_connections = 16
  	max_requests = 0
  	lifetime = 0
  	idle_timeout = 0
  }
  coa {
  	irt = 2
  	mrt = 16
  	mrc = 5
  	mrd = 30
  }
  recv_coa {
  }
 }
 home_server_pool my_auth_failover {
	type = fail-over
	home_server = localhost
 }
 realm example.com {
	auth_pool = my_auth_failover
 }
 realm LOCAL {
 }
radiusd: #### Loading Clients ####
 client localhost {
 	ipaddr = 127.0.0.1
 	require_message_authenticator = no
 	secret = <<< secret >>>
 	nas_type = "other"
 	proto = "*"
  limit {
  	max_connections = 16
  	lifetime = 0
  	idle_timeout = 30
  }
 }
 client localhost_ipv6 {
 	ipv6addr = ::1
 	require_message_authenticator = no
 	secret = <<< secret >>>
  limit {
  	max_connections = 16
  	lifetime = 0
  	idle_timeout = 30
  }
 }
Debugger not attached
systemd watchdog is disabled
 # Creating Auth-Type = mschap
 # Creating Auth-Type = eap
 # Creating Auth-Type = PAP
 # Creating Auth-Type = CHAP
 # Creating Auth-Type = MS-CHAP
 # Creating Auth-Type = digest
 # Creating Autz-Type = New-TLS-Connection
radiusd: #### Instantiating modules ####
 modules {
  # Loaded module rlm_eap
  # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap
  eap {
  	default_eap_type = "md5"
  	timer_expire = 60
  	ignore_unknown_eap_types = no
  	cisco_accounting_username_bug = no
  	max_sessions = 16384
  }
  # Loaded module rlm_dynamic_clients
  # Loading module "dynamic_clients" from file
/etc/freeradius/3.0/mods-enabled/dynamic_clients
  # Loaded module rlm_detail
  # Loading module "detail" from file
/etc/freeradius/3.0/mods-enabled/detail
  detail {
  	filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-A
ddress}}/detail-%Y%m%d"
  	header = "%t"
  	permissions = 384
  	locking = no
  	escape_filenames = no
  	log_packet_header = no
  }
  # Loaded module rlm_exec
  # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo
  exec echo {
  	wait = yes
  	program = "/bin/echo %{User-Name}"
  	input_pairs = "request"
  	output_pairs = "reply"
  	shell_escape = yes
  }
  # Loaded module rlm_preprocess
  # Loading module "preprocess" from file
/etc/freeradius/3.0/mods-enabled/preprocess
  preprocess {
  	huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups"
  	hints = "/etc/freeradius/3.0/mods-config/preprocess/hints"
  	with_ascend_hack = no
  	ascend_channels_per_line = 23
  	with_ntdomain_hack = no
  	with_specialix_jetstream_hack = no
  	with_cisco_vsa_hack = no
  	with_alvarion_vsa_hack = no
  }
  # Loaded module rlm_radutmp
  # Loading module "radutmp" from file
/etc/freeradius/3.0/mods-enabled/radutmp
  radutmp {
  	filename = "/var/log/freeradius/radutmp"
  	username = "%{User-Name}"
  	case_sensitive = yes
  	check_with_nas = yes
  	permissions = 384
  	caller_id = yes
  }
  # Loading module "ntlm_auth" from file
/etc/freeradius/3.0/mods-enabled/ntlm_auth
  exec ntlm_auth {
  	wait = yes
  	program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN
--username=%{mschap:User-Name} --password=%{User-Password}"
  	shell_escape = yes
  }
  # Loaded module rlm_digest
  # Loading module "digest" from file
/etc/freeradius/3.0/mods-enabled/digest
  # Loaded module rlm_expiration
  # Loading module "expiration" from file
/etc/freeradius/3.0/mods-enabled/expiration
  # Loaded module rlm_pap
  # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap
  pap {
  	normalise = yes
  }
  # Loaded module rlm_logintime
  # Loading module "logintime" from file
/etc/freeradius/3.0/mods-enabled/logintime
  logintime {
  	minimum_timeout = 60
  }
  # Loaded module rlm_chap
  # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap
  # Loaded module rlm_unpack
  # Loading module "unpack" from file
/etc/freeradius/3.0/mods-enabled/unpack
  # Loaded module rlm_replicate
  # Loading module "replicate" from file
/etc/freeradius/3.0/mods-enabled/replicate
  # Loaded module rlm_utf8
  # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8
  # Loaded module rlm_sql
  # Loading module "sql" from file /etc/freeradius/3.0/mods-enabled/sql
  sql {
  	driver = "rlm_sql_mysql"
  	server = "localhost"
  	port = 3306
  	login = "radius"
  	password = <<< secret >>>
  	radius_db = "radius"
  	read_groups = yes
  	read_profiles = yes
  	read_clients = yes
  	delete_stale_sessions = yes
  	sql_user_name = "%{User-Name}"
  	default_user_profile = ""
  	client_query = "SELECT id, nasname, shortname, type, secret, server
FROM nas"
  	authorize_check_query = "SELECT id, username, attribute, value, op
FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id"
  	authorize_reply_query = "SELECT id, username, attribute, value, op
FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id"
  	authorize_group_check_query = "SELECT id, groupname, attribute,
Value, op FROM radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY id"
  	authorize_group_reply_query = "SELECT id, groupname, attribute,
value, op FROM radgroupreply WHERE groupname = '%{SQL-Group}' ORDER BY id"
  	group_membership_query = "SELECT groupname FROM radusergroup WHERE
username = '%{SQL-User-Name}' ORDER BY priority"
  	simul_count_query = "SELECT COUNT(*) FROM radacct a LEFT OUTER JOIN
nasreload n USING (nasipaddress) WHERE username = '%{SQL-User-Name}' AND
acctstoptime IS NULL AND (a.acctstarttime > n.reloadtime OR n.reloadtime IS
NULL)"
  	simul_verify_query = "SELECT radacctid, acctsessionid, username,
nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol
FROM radacct a LEFT OUTER JOIN nasreload n USING (nasipaddress) WHERE
username = '%{SQL-User-Name}' AND acctstoptime IS NULL AND (a.acctstarttime
...
n.reloadtime OR n.reloadtime IS NULL)"
   safe_characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
   auto_escape = no
   accounting {
   reference =
"%{tolower:type.%{%{Acct-Status-Type}:-%{Request-Processing-Stage}}.query}"
    type {
     accounting-on {
     	query = "UPDATE radacct SET acctstoptime =
FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), acctsessiontime	=
'%{%{integer:Event-Timestamp}:-%l}' - UNIX_TIMESTAMP(acctstarttime),
acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE
acctstoptime IS NULL AND nasipaddress   = '%{NAS-IP-Address}' AND
acctstarttime <= FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l})"
     }
     accounting-off {
     	query = "UPDATE radacct SET acctstoptime =
FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), acctsessiontime	=
'%{%{integer:Event-Timestamp}:-%l}' - UNIX_TIMESTAMP(acctstarttime),
acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE
acctstoptime IS NULL AND nasipaddress   = '%{NAS-IP-Address}' AND
acctstarttime <= FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l})"
     }
     start {
     	query = "INSERT INTO radacct (acctsessionid,
acctuniqueid,		username, realm,
nasipaddress,		nasportid, nasporttype,		acctstarttime,
acctupdatetime, acctstoptime,		acctsessiontime,
acctauthentic, connectinfo_start,	connectinfo_stop,
acctinputoctets, acctoutputoctets,	calledstationid,
callingstationid, acctterminatecause,	servicetype,
framedprotocol, framedipaddress,	framedipv6address,
framedipv6prefix, framedinterfaceid,	delegatedipv6prefix	) VALUES
('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}',
'%{Realm}', '%{NAS-IP-Address}', '%{%{NAS-Port-ID}:-%{NAS-Port}}',
'%{NAS-Port-Type}', FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}),
FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), NULL, '0',
'%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0',
'%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}',
'%{Framed-Protocol}', '%{Framed-IP-Address}', '%{Framed-IPv6-Address}',
'%{Framed-IPv6-Prefix}', '%{Framed-Interface-Id}',
'%{Delegated-IPv6-Prefix}' )"
     }
     interim-update {
     	query = "UPDATE radacct SET acctupdatetime  =
(@acctupdatetime_old:=acctupdatetime), acctupdatetime  =
FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), acctinterval    =
%{%{integer:Event-Timestamp}:-%l} - UNIX_TIMESTAMP(@acctupdatetime_old),
framedipaddress = '%{Framed-IP-Address}', framedipv6address =
'%{Framed-IPv6-Address}', framedipv6prefix = '%{Framed-IPv6-Prefix}',
framedinterfaceid = '%{Framed-Interface-Id}', delegatedipv6prefix =
'%{Delegated-IPv6-Prefix}', acctsessiontime = %{%{Acct-Session-Time}:-NULL},
acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 |
'%{%{Acct-Input-Octets}:-0}', acctoutputoctets =
'%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}' WHERE
AcctUniqueId = '%{Acct-Unique-Session-Id}'"
     }
     stop {
     	query = "UPDATE radacct SET acctstoptime	=
FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), acctsessiontime	=
%{%{Acct-Session-Time}:-NULL}, acctinputoctets	=
'%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}',
acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 |
'%{%{Acct-Output-Octets}:-0}', acctterminatecause =
'%{Acct-Terminate-Cause}', connectinfo_stop = '%{Connect-Info}' WHERE
AcctUniqueId = '%{Acct-Unique-Session-Id}'"
     }
    }
   }
   post-auth {
   reference = ".query"
   query = "INSERT INTO radpostauth (username, pass, reply, authdate )
VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}',
'%{reply:Packet-Type}', '%S.%M' )"
   }
  }
rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked
Creating attribute SQL-Group
  # Loaded module rlm_always
  # Loading module "reject" from file
/etc/freeradius/3.0/mods-enabled/always
  always reject {
   rcode = "reject"
   simulcount = 0
   mpp = no
  }
  # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always
  always fail {
   rcode = "fail"
   simulcount = 0
   mpp = no
  }
  # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always
  always ok {
   rcode = "ok"
   simulcount = 0
   mpp = no
  }
  # Loading module "handled" from file
/etc/freeradius/3.0/mods-enabled/always
  always handled {
   rcode = "handled"
   simulcount = 0
   mpp = no
  }
  # Loading module "invalid" from file
/etc/freeradius/3.0/mods-enabled/always
  always invalid {
   rcode = "invalid"
   simulcount = 0
   mpp = no
  }
  # Loading module "userlock" from file
/etc/freeradius/3.0/mods-enabled/always
  always userlock {
   rcode = "userlock"
   simulcount = 0
   mpp = no
  }
  # Loading module "notfound" from file
/etc/freeradius/3.0/mods-enabled/always
  always notfound {
   rcode = "notfound"
   simulcount = 0
   mpp = no
  }
  # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always
  always noop {
   rcode = "noop"
   simulcount = 0
   mpp = no
  }
  # Loading module "updated" from file
/etc/freeradius/3.0/mods-enabled/always
  always updated {
   rcode = "updated"
   simulcount = 0
   mpp = no
  }
  # Loaded module rlm_unix
  # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix
  unix {
   radwtmp = "/var/log/freeradius/radwtmp"
  }
Creating attribute Unix-Group
  # Loaded module rlm_realm
  # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm
  realm IPASS {
   format = "prefix"
   delimiter = "/"
   ignore_default = no
   ignore_null = no
  }
  # Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm
  realm suffix {
   format = "suffix"
   delimiter = "@"
   ignore_default = no
   ignore_null = no
  }
  # Loading module "bangpath" from file
/etc/freeradius/3.0/mods-enabled/realm
  realm bangpath {
   format = "prefix"
   delimiter = "!"
   ignore_default = no
   ignore_null = no
  }
  # Loading module "realmpercent" from file
/etc/freeradius/3.0/mods-enabled/realm
  realm realmpercent {
   format = "suffix"
   delimiter = "%"
   ignore_default = no
   ignore_null = no
  }
  # Loading module "ntdomain" from file
/etc/freeradius/3.0/mods-enabled/realm
  realm ntdomain {
   format = "prefix"
   delimiter = "\\"
   ignore_default = no
   ignore_null = no
  }
  # Loaded module rlm_files
  # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files
  files {
   filename = "/etc/freeradius/3.0/mods-config/files/authorize"
   acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting"
   preproxy_usersfile =
"/etc/freeradius/3.0/mods-config/files/pre-proxy"
  }
  # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec
  exec {
   wait = no
   input_pairs = "request"
   shell_escape = yes
   timeout = 10
  }
  # Loading module "sradutmp" from file
/etc/freeradius/3.0/mods-enabled/sradutmp
  radutmp sradutmp {
   filename = "/var/log/freeradius/sradutmp"
   username = "%{User-Name}"
   case_sensitive = yes
   check_with_nas = yes
   permissions = 420
   caller_id = no
  }
  # Loaded module rlm_mschap
  # Loading module "mschap" from file
/etc/freeradius/3.0/mods-enabled/mschap
  mschap {
   use_mppe = yes
   require_encryption = no
   require_strong = no
   with_ntdomain_hack = yes
   passchange {
   }
   allow_retry = yes
   winbind_retry_with_normalised_username = no
  }
  # Loaded module rlm_attr_filter
  # Loading module "attr_filter.post-proxy" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.post-proxy {
   filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy"
   key = "%{Realm}"
   relaxed = no
  }
  # Loading module "attr_filter.pre-proxy" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.pre-proxy {
   filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy"
   key = "%{Realm}"
   relaxed = no
  }
  # Loading module "attr_filter.access_reject" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.access_reject {
   filename =
"/etc/freeradius/3.0/mods-config/attr_filter/access_reject"
   key = "%{User-Name}"
   relaxed = no
  }
  # Loading module "attr_filter.access_challenge" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.access_challenge {
   filename =
"/etc/freeradius/3.0/mods-config/attr_filter/access_challenge"
   key = "%{User-Name}"
   relaxed = no
  }
  # Loading module "attr_filter.accounting_response" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.accounting_response {
   filename =
"/etc/freeradius/3.0/mods-config/attr_filter/accounting_response"
   key = "%{User-Name}"
   relaxed = no
  }
  # Loading module "attr_filter.coa" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.coa {
   filename = "/etc/freeradius/3.0/mods-config/attr_filter/coa"
   key = "%{User-Name}"
   relaxed = no
  }
  # Loaded module rlm_linelog
  # Loading module "linelog" from file
/etc/freeradius/3.0/mods-enabled/linelog
  linelog {
   filename = "/var/log/freeradius/linelog"
   escape_filenames = no
   syslog_severity = "info"
   permissions = 384
   format = "This is a log message for %{User-Name}"
   reference = "messages.%{%{reply:Packet-Type}:-default}"
  }
  # Loading module "log_accounting" from file
/etc/freeradius/3.0/mods-enabled/linelog
  linelog log_accounting {
   filename = "/var/log/freeradius/linelog-accounting"
   escape_filenames = no
   syslog_severity = "info"
   permissions = 384
   format = ""
   reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
  }
  # Loaded module rlm_passwd
  # Loading module "etc_passwd" from file
/etc/freeradius/3.0/mods-enabled/passwd
  passwd etc_passwd {
   filename = "/etc/passwd"
   format = "*User-Name:Crypt-Password:"
   delimiter = ":"
   ignore_nislike = no
   ignore_empty = yes
   allow_multiple_keys = no
   hash_size = 100
  }
  # Loading module "auth_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
  detail auth_log {
   filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-A
ddress}}/auth-detail-%Y%m%d"
   header = "%t"
   permissions = 384
   locking = no
   escape_filenames = no
   log_packet_header = no
  }
  # Loading module "reply_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
  detail reply_log {
   filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-A
ddress}}/reply-detail-%Y%m%d"
   header = "%t"
   permissions = 384
   locking = no
   escape_filenames = no
   log_packet_header = no
  }
  # Loading module "pre_proxy_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
  detail pre_proxy_log {
   filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-A
ddress}}/pre-proxy-detail-%Y%m%d"
   header = "%t"
   permissions = 384
   locking = no
   escape_filenames = no
   log_packet_header = no
  }
  # Loading module "post_proxy_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
  detail post_proxy_log {
   filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-A
ddress}}/post-proxy-detail-%Y%m%d"
   header = "%t"
   permissions = 384
   locking = no
   escape_filenames = no
   log_packet_header = no
  }
  # Loaded module rlm_soh
  # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh
  soh {
   dhcp = yes
  }
  # Loaded module rlm_expr
  # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr
  expr {
   safe_characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
/äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
  }
  instantiate {
  }
  # Instantiating module "eap" from file
/etc/freeradius/3.0/mods-enabled/eap
   # Linked to sub-module rlm_eap_md5
   # Linked to sub-module rlm_eap_gtc
   gtc {
   challenge = "Password: "
   auth_type = "PAP"
   }
   # Linked to sub-module rlm_eap_tls
   tls {
   tls = "tls-common"
   }
   tls-config tls-common {
   verify_depth = 0
   ca_path = "/etc/freeradius/3.0/certs"
   pem_file_type = yes
   private_key_file = "/etc/ssl/private/ssl-cert-snakeoil.key"
   certificate_file = "/etc/ssl/certs/ssl-cert-snakeoil.pem"
   ca_file = "/etc/ssl/certs/ca-certificates.crt"
   private_key_password = <<< secret >>>
   fragment_size = 1024
   include_length = yes
   auto_chain = yes
   check_crl = no
   check_all_crl = no
   ca_path_reload_interval = 0
   cipher_list = "DEFAULT"
   cipher_server_preference = no
   reject_unknown_intermediate_ca = no
   ecdh_curve = ""
   tls_max_version = "1.2"
   tls_min_version = "1.2"
    cache {
    	enable = no
    	lifetime = 24
    	max_entries = 255
    }
    verify {
    	skip_if_ocsp_ok = no
    }
    ocsp {
    	enable = no
    	override_cert_url = yes
    	url = "http://127.0.0.1/ocsp/"
    	use_nonce = yes
    	timeout = 0
    	softfail = no
    }
   }
   # Linked to sub-module rlm_eap_ttls
   ttls {
   tls = "tls-common"
   default_eap_type = "md5"
   copy_request_to_tunnel = no
   use_tunneled_reply = no
   virtual_server = "inner-tunnel"
   include_length = yes
   require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_peap
   peap {
   tls = "tls-common"
   default_eap_type = "mschapv2"
   copy_request_to_tunnel = no
   use_tunneled_reply = no
   proxy_tunneled_request_as_eap = yes
   virtual_server = "inner-tunnel"
   soh = no
   require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_mschapv2
   mschapv2 {
   with_ntdomain_hack = no
   send_error = no
   }
  # Instantiating module "detail" from file
/etc/freeradius/3.0/mods-enabled/detail
  # Instantiating module "preprocess" from file
/etc/freeradius/3.0/mods-enabled/preprocess
reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups
reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints
  # Instantiating module "expiration" from file
/etc/freeradius/3.0/mods-enabled/expiration
  # Instantiating module "pap" from file
/etc/freeradius/3.0/mods-enabled/pap
  # Instantiating module "logintime" from file
/etc/freeradius/3.0/mods-enabled/logintime
  # Instantiating module "sql" from file
/etc/freeradius/3.0/mods-enabled/sql
rlm_sql_mysql: libmysql version: 8.0.34
   mysql {
    tls {
    	tls_required = no
    	check_cert = no
    	check_cert_cn = no
    }
   warnings = "auto"
   }
rlm_sql (sql): Attempting to connect to database "radius"
rlm_sql (sql): Initialising connection pool
   pool {
   start = 5
   min = 3
   max = 32
   spare = 10
   uses = 0
   lifetime = 0
   cleanup_interval = 30
   idle_timeout = 60
   retry_delay = 30
   spread = no
   }
rlm_sql (sql): Opening additional connection (0), 1 of 32 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
WARNING: MYSQL_OPT_RECONNECT is deprecated and will be removed in a future
version.
rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket,
server version 5.5.5-10.11.2-MariaDB-1, protocol version 10
rlm_sql (sql): Opening additional connection (1), 1 of 31 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
WARNING: MYSQL_OPT_RECONNECT is deprecated and will be removed in a future
version.
rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket,
server version 5.5.5-10.11.2-MariaDB-1, protocol version 10
rlm_sql (sql): Opening additional connection (2), 1 of 30 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
WARNING: MYSQL_OPT_RECONNECT is deprecated and will be removed in a future
version.
rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket,
server version 5.5.5-10.11.2-MariaDB-1, protocol version 10
rlm_sql (sql): Opening additional connection (3), 1 of 29 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
WARNING: MYSQL_OPT_RECONNECT is deprecated and will be removed in a future
version.
rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket,
server version 5.5.5-10.11.2-MariaDB-1, protocol version 10
rlm_sql (sql): Opening additional connection (4), 1 of 28 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
WARNING: MYSQL_OPT_RECONNECT is deprecated and will be removed in a future
version.
rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket,
server version 5.5.5-10.11.2-MariaDB-1, protocol version 10
rlm_sql (sql): Processing generate_sql_clients
rlm_sql (sql) in generate_sql_clients: query is SELECT id, nasname,
shortname, type, secret, server FROM nas
rlm_sql (sql): Reserved connection (0)
rlm_sql (sql): Executing select query: SELECT id, nasname, shortname, type,
secret, server FROM nas
rlm_sql (sql): Adding client 192.168.5.0/24 () to default clients list
No 'clients' configuration item in first listener of virtual server default.
Adding client to global client list
rlm_sql (192.168.5.0): Client "" (sql) added
rlm_sql (sql): Released connection (0)
Need more connections to reach 10 spares
rlm_sql (sql): Opening additional connection (5), 1 of 27 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
WARNING: MYSQL_OPT_RECONNECT is deprecated and will be removed in a future
version.
rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket,
server version 5.5.5-10.11.2-MariaDB-1, protocol version 10
  # Instantiating module "reject" from file
/etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "fail" from file
/etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "ok" from file
/etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "handled" from file
/etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "invalid" from file
/etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "userlock" from file
/etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "notfound" from file
/etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "noop" from file
/etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "updated" from file
/etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "IPASS" from file
/etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "suffix" from file
/etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "bangpath" from file
/etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "realmpercent" from file
/etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "ntdomain" from file
/etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "files" from file
/etc/freeradius/3.0/mods-enabled/files
reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize
reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting
reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy
  # Instantiating module "mschap" from file
/etc/freeradius/3.0/mods-enabled/mschap
rlm_mschap (mschap): using internal authentication
  # Instantiating module "attr_filter.post-proxy" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy
  # Instantiating module "attr_filter.pre-proxy" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy
  # Instantiating module "attr_filter.access_reject" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file
/etc/freeradius/3.0/mods-config/attr_filter/access_reject
  # Instantiating module "attr_filter.access_challenge" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file
/etc/freeradius/3.0/mods-config/attr_filter/access_challenge
  # Instantiating module "attr_filter.accounting_response" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file
/etc/freeradius/3.0/mods-config/attr_filter/accounting_response
  # Instantiating module "attr_filter.coa" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/coa
  # Instantiating module "linelog" from file
/etc/freeradius/3.0/mods-enabled/linelog
  # Instantiating module "log_accounting" from file
/etc/freeradius/3.0/mods-enabled/linelog
  # Instantiating module "etc_passwd" from file
/etc/freeradius/3.0/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
  # Instantiating module "auth_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail
output
  # Instantiating module "reply_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
  # Instantiating module "pre_proxy_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
  # Instantiating module "post_proxy_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
 } # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/freeradius/3.0/radiusd.conf
} # server
server inner-tunnel { # from file
/etc/freeradius/3.0/sites-enabled/inner-tunnel
 # Loading authenticate {...}
Compiling Auth-Type PAP for attr Auth-Type
Compiling Auth-Type CHAP for attr Auth-Type
Compiling Auth-Type MS-CHAP for attr Auth-Type
 # Loading authorize {...}
Ignoring "ldap" (see raddb/mods-available/README.rst)
 # Loading session {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
 # Skipping contents of 'if' as it is always 'false' --
/etc/freeradius/3.0/sites-enabled/inner-tunnel:336
Compiling Post-Auth-Type REJECT for attr Post-Auth-Type
} # server inner-tunnel
server default { # from file /etc/freeradius/3.0/sites-enabled/default
 # Loading authenticate {...}
Compiling Auth-Type PAP for attr Auth-Type
Compiling Auth-Type CHAP for attr Auth-Type
Compiling Auth-Type MS-CHAP for attr Auth-Type
 # Loading authorize {...}
Compiling Autz-Type New-TLS-Connection for attr Autz-Type
 # Loading preacct {...}
 # Loading accounting {...}
 # Loading session {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
Compiling Post-Auth-Type REJECT for attr Post-Auth-Type
Compiling Post-Auth-Type Challenge for attr Post-Auth-Type
Compiling Post-Auth-Type Client-Lost for attr Post-Auth-Type
} # server default
radiusd: #### Opening IP addresses and Ports ####
listen {
   type = "auth"
   ipaddr = 127.0.0.1
   port = 18120
}
listen {
   type = "auth"
   ipaddr = *
   port = 0
   limit {
   max_connections = 16
   lifetime = 0
   idle_timeout = 30
   }
}
listen {
   type = "acct"
   ipaddr = *
   port = 0
   limit {
   max_connections = 16
   lifetime = 0
   idle_timeout = 30
   }
}
listen {
   type = "auth"
   ipv6addr = ::
   port = 0
   limit {
   max_connections = 16
   lifetime = 0
   idle_timeout = 30
   }
}
listen {
   type = "acct"
   ipv6addr = ::
   port = 0
   limit {
   max_connections = 16
   lifetime = 0
   idle_timeout = 30
   }
}
Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
Listening on auth address * port 1812 bound to server default
Listening on acct address * port 1813 bound to server default
Listening on auth address :: port 1812 bound to server default
Listening on acct address :: port 1813 bound to server default
Listening on proxy address * port 53482
Listening on proxy address :: port 54068
Ready to process requests
(0) Received Access-Request Id 100 from 192.168.5.122:37035 to
192.168.2.124:1812 length 232
(0)   User-Name = "allan"
(0)   NAS-IP-Address = 192.168.5.122
(0)   NAS-Identifier = "62223237ad69"
(0)   Called-Station-Id = "62-22-32-37-AD-69:TestLP"
(0)   NAS-Port-Type = Wireless-802.11
(0)   Service-Type = Framed-User
(0)   Calling-Station-Id = "9C-30-5B-FF-57-C7"
(0)   Connect-Info = "CONNECT 0Mbps 802.11g"
(0)   Acct-Session-Id = "4F42900D48C05B30"
(0)   Acct-Multi-Session-Id = "C4E290913619F242"
(0)   WLAN-Pairwise-Cipher = 1027076
(0)   WLAN-Group-Cipher = 1027076
(0)   WLAN-AKM-Suite = 1027077
(0)   WLAN-Group-Mgmt-Cipher = 1027078
(0)   Filter-Id = "wpa-eap"
(0)   Framed-MTU = 1400
(0)   EAP-Message = 0x02fe000a01616c6c616e
(0)   Message-Authenticator = 0xc0e9a94c0eef117b43a331b6ccc6568c
(0) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(0)   authorize {
(0)     policy filter_username {
(0)       if (&User-Name) {
(0)       if (&User-Name)  -> TRUE
(0)       if (&User-Name)  {
(0)         if (&User-Name =~ / /) {
(0)         if (&User-Name =~ / /)  -> FALSE
(0)         if (&User-Name =~ /@[^@]*@/ ) {
(0)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(0)         if (&User-Name =~ /\.\./ ) {
(0)         if (&User-Name =~ /\.\./ )  -> FALSE
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(0)         if (&User-Name =~ /\.$/)  {
(0)         if (&User-Name =~ /\.$/)   -> FALSE
(0)         if (&User-Name =~ /@\./)  {
(0)         if (&User-Name =~ /@\./)   -> FALSE
(0)       } # if (&User-Name)  = notfound
(0)     } # policy filter_username = notfound
(0)     [preprocess] = ok
(0)     [chap] = noop
(0)     [mschap] = noop
(0)     [digest] = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: No '@' in User-Name = "allan", looking up realm NULL
(0) suffix: No such realm "NULL"
(0)     [suffix] = noop
(0) eap: Peer sent EAP Response (code 2) ID 254 length 10
(0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest
of authorize
(0)     [eap] = ok
(0)   } # authorize = ok
(0) Found Auth-Type = eap
(0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(0)   authenticate {
(0) eap: Peer sent packet with method EAP Identity (1)
(0) eap: Calling submodule eap_md5 to process data
(0) eap_md5: Issuing MD5 Challenge
(0) eap: Sending EAP Request (code 1) ID 255 length 22
(0) eap: EAP session adding &reply:State = 0xbe5e90bfbea1947e
(0)     [eap] = handled
(0)   } # authenticate = handled
(0) Using Post-Auth-Type Challenge
(0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(0)   Challenge { ... } # empty sub-section is ignored
(0) Sent Access-Challenge Id 100 from 192.168.2.124:1812 to
192.168.5.122:37035 length 80
(0)   EAP-Message = 0x01ff001604108ab24bfcc081c9c83dbd9bc68668c763
(0)   Message-Authenticator = 0x00000000000000000000000000000000
(0)   State = 0xbe5e90bfbea1947e1fec683d113a9433
(0) Finished request
Waking up in 4.9 seconds.
(1) Received Access-Request Id 101 from 192.168.5.122:37035 to
192.168.2.124:1812 length 247
(1)   User-Name = "allan"
(1)   NAS-IP-Address = 192.168.5.122
(1)   NAS-Identifier = "62223237ad69"
(1)   Called-Station-Id = "62-22-32-37-AD-69:TestLP"
(1)   NAS-Port-Type = Wireless-802.11
(1)   Service-Type = Framed-User
(1)   Calling-Station-Id = "9C-30-5B-FF-57-C7"
(1)   Connect-Info = "CONNECT 0Mbps 802.11g"
(1)   Acct-Session-Id = "4F42900D48C05B30"
(1)   Acct-Multi-Session-Id = "C4E290913619F242"
(1)   WLAN-Pairwise-Cipher = 1027076
(1)   WLAN-Group-Cipher = 1027076
(1)   WLAN-AKM-Suite = 1027077
(1)   WLAN-Group-Mgmt-Cipher = 1027078
(1)   Filter-Id = "wpa-eap"
(1)   Framed-MTU = 1400
(1)   EAP-Message = 0x02ff0007031915
(1)   State = 0xbe5e90bfbea1947e1fec683d113a9433
(1)   Message-Authenticator = 0x81666d2ef094bbf85a6a5684b5c23b67
(1) session-state: No cached attributes
(1) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(1)   authorize {
(1)     policy filter_username {
(1)       if (&User-Name) {
(1)       if (&User-Name)  -> TRUE
(1)       if (&User-Name)  {
(1)         if (&User-Name =~ / /) {
(1)         if (&User-Name =~ / /)  -> FALSE
(1)         if (&User-Name =~ /@[^@]*@/ ) {
(1)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(1)         if (&User-Name =~ /\.\./ ) {
(1)         if (&User-Name =~ /\.\./ )  -> FALSE
(1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(1)         if (&User-Name =~ /\.$/)  {
(1)         if (&User-Name =~ /\.$/)   -> FALSE
(1)         if (&User-Name =~ /@\./)  {
(1)         if (&User-Name =~ /@\./)   -> FALSE
(1)       } # if (&User-Name)  = notfound
(1)     } # policy filter_username = notfound
(1)     [preprocess] = ok
(1)     [chap] = noop
(1)     [mschap] = noop
(1)     [digest] = noop
(1) suffix: Checking for suffix after "@"
(1) suffix: No '@' in User-Name = "allan", looking up realm NULL
(1) suffix: No such realm "NULL"
(1)     [suffix] = noop
(1) eap: Peer sent EAP Response (code 2) ID 255 length 7
(1) eap: No EAP Start, assuming it's an on-going EAP conversation
(1)     [eap] = updated
(1)     [files] = noop
(1) sql: EXPAND %{User-Name}
(1) sql:    --> allan
(1) sql: SQL-User-Name set to 'allan'
rlm_sql (sql): Reserved connection (1)
(1) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck
WHERE username = '%{SQL-User-Name}' ORDER BY id
(1) sql:    --> SELECT id, username, attribute, value, op FROM radcheck
WHERE username = 'allan' ORDER BY id
(1) sql: Executing select query: SELECT id, username, attribute, value, op
FROM radcheck WHERE username = 'allan' ORDER BY id
(1) sql: User found in radcheck table
(1) sql: Conditional check items matched, merging assignment check items
(1) sql:   Cleartext-Password := "teste1234"
(1) sql: EXPAND SELECT id, username, attribute, value, op FROM radreply
WHERE username = '%{SQL-User-Name}' ORDER BY id
(1) sql:    --> SELECT id, username, attribute, value, op FROM radreply
WHERE username = 'allan' ORDER BY id
(1) sql: Executing select query: SELECT id, username, attribute, value, op
FROM radreply WHERE username = 'allan' ORDER BY id
(1) sql: EXPAND SELECT groupname FROM radusergroup WHERE username =
'%{SQL-User-Name}' ORDER BY priority
(1) sql:    --> SELECT groupname FROM radusergroup WHERE username = 'allan'
ORDER BY priority
(1) sql: Executing select query: SELECT groupname FROM radusergroup WHERE
username = 'allan' ORDER BY priority
(1) sql: User found in the group table
(1) sql: EXPAND SELECT id, groupname, attribute, Value, op FROM
radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY id
(1) sql:    --> SELECT id, groupname, attribute, Value, op FROM
radgroupcheck WHERE groupname = 'wifi' ORDER BY id
(1) sql: Executing select query: SELECT id, groupname, attribute, Value, op
FROM radgroupcheck WHERE groupname = 'wifi' ORDER BY id
(1) sql: Group "wifi": Conditional check items matched
(1) sql: Group "wifi": Merging assignment check items
(1) sql:   Simultaneous-Use := 1
(1) sql: EXPAND SELECT id, groupname, attribute, value, op FROM
radgroupreply WHERE groupname = '%{SQL-Group}' ORDER BY id
(1) sql:    --> SELECT id, groupname, attribute, value, op FROM
radgroupreply WHERE groupname = 'wifi' ORDER BY id
(1) sql: Executing select query: SELECT id, groupname, attribute, value, op
FROM radgroupreply WHERE groupname = 'wifi' ORDER BY id
(1) sql: Group "wifi": Merging reply items
rlm_sql (sql): Released connection (1)
Need more connections to reach 10 spares
rlm_sql (sql): Opening additional connection (6), 1 of 26 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
WARNING: MYSQL_OPT_RECONNECT is deprecated and will be removed in a future
version.
rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket,
server version 5.5.5-10.11.2-MariaDB-1, protocol version 10
(1)     [sql] = ok
(1)     [expiration] = noop
(1)     [logintime] = noop
(1) pap: WARNING: Auth-Type already set.  Not setting to PAP
(1)     [pap] = noop
(1)   } # authorize = updated
(1) Found Auth-Type = eap
(1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(1)   authenticate {
(1) eap: Expiring EAP session with state 0xbe5e90bfbea1947e
(1) eap: Finished EAP session with state 0xbe5e90bfbea1947e
(1) eap: Previous EAP request found for state 0xbe5e90bfbea1947e, released
from the list
(1) eap: Peer sent packet with method EAP NAK (3)
(1) eap: Found mutually acceptable type PEAP (25)
(1) eap: Calling submodule eap_peap to process data
(1) eap_peap: (TLS) Initiating new session
(1) eap: Sending EAP Request (code 1) ID 0 length 6
(1) eap: EAP session adding &reply:State = 0xbe5e90bfbf5e897e
(1)     [eap] = handled
(1)   } # authenticate = handled
(1) Using Post-Auth-Type Challenge
(1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(1)   Challenge { ... } # empty sub-section is ignored
(1) session-state: Saving cached attributes
(1)   Framed-MTU = 994
(1) Sent Access-Challenge Id 101 from 192.168.2.124:1812 to
192.168.5.122:37035 length 64
(1)   EAP-Message = 0x010000061920
(1)   Message-Authenticator = 0x00000000000000000000000000000000
(1)   State = 0xbe5e90bfbf5e897e1fec683d113a9433
(1) Finished request
Waking up in 4.9 seconds.
(2) Received Access-Request Id 102 from 192.168.5.122:37035 to
192.168.2.124:1812 length 412
(2)   User-Name = "allan"
(2)   NAS-IP-Address = 192.168.5.122
(2)   NAS-Identifier = "62223237ad69"
(2)   Called-Station-Id = "62-22-32-37-AD-69:TestLP"
(2)   NAS-Port-Type = Wireless-802.11
(2)   Service-Type = Framed-User
(2)   Calling-Station-Id = "9C-30-5B-FF-57-C7"
(2)   Connect-Info = "CONNECT 0Mbps 802.11g"
(2)   Acct-Session-Id = "4F42900D48C05B30"
(2)   Acct-Multi-Session-Id = "C4E290913619F242"
(2)   WLAN-Pairwise-Cipher = 1027076
(2)   WLAN-Group-Cipher = 1027076
(2)   WLAN-AKM-Suite = 1027077
(2)   WLAN-Group-Mgmt-Cipher = 1027078
(2)   Filter-Id = "wpa-eap"
(2)   Framed-MTU = 1400
(2)   EAP-Message =
0x020000ac1980000000a2160303009d010000990303652536c123e82efbc81b56128fcd59f7
ec4f86525550980aeb73dabb1c61f56300002ac02cc02bc030c02f009f009ec024c023c028c0
27c00ac009c014c013009d009c003d003c0035002f000a01000046000500050100000000000a
00080006001d00170018000b00020100000d001a001808040805080604010501020104030503
02030202060106030023000000170000ff01000100
(2)   State = 0xbe5e90bfbf5e897e1fec683d113a9433
(2)   Message-Authenticator = 0x3603d153e7d7ccdc99ea6b48366008bc
(2) Restoring &session-state
(2)   &session-state:Framed-MTU = 994
(2) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(2)   authorize {
(2)     policy filter_username {
(2)       if (&User-Name) {
(2)       if (&User-Name)  -> TRUE
(2)       if (&User-Name)  {
(2)         if (&User-Name =~ / /) {
(2)         if (&User-Name =~ / /)  -> FALSE
(2)         if (&User-Name =~ /@[^@]*@/ ) {
(2)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(2)         if (&User-Name =~ /\.\./ ) {
(2)         if (&User-Name =~ /\.\./ )  -> FALSE
(2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(2)         if (&User-Name =~ /\.$/)  {
(2)         if (&User-Name =~ /\.$/)   -> FALSE
(2)         if (&User-Name =~ /@\./)  {
(2)         if (&User-Name =~ /@\./)   -> FALSE
(2)       } # if (&User-Name)  = notfound
(2)     } # policy filter_username = notfound
(2)     [preprocess] = ok
(2)     [chap] = noop
(2)     [mschap] = noop
(2)     [digest] = noop
(2) suffix: Checking for suffix after "@"
(2) suffix: No '@' in User-Name = "allan", looking up realm NULL
(2) suffix: No such realm "NULL"
(2)     [suffix] = noop
(2) eap: Peer sent EAP Response (code 2) ID 0 length 172
(2) eap: Continuing tunnel setup
(2)     [eap] = ok
(2)   } # authorize = ok
(2) Found Auth-Type = eap
(2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(2)   authenticate {
(2) eap: Expiring EAP session with state 0xbe5e90bfbf5e897e
(2) eap: Finished EAP session with state 0xbe5e90bfbf5e897e
(2) eap: Previous EAP request found for state 0xbe5e90bfbf5e897e, released
from the list
(2) eap: Peer sent packet with method EAP PEAP (25)
(2) eap: Calling submodule eap_peap to process data
(2) eap_peap: (TLS) EAP Peer says that the final record size will be 162
bytes
(2) eap_peap: (TLS) EAP Got all data (162 bytes)
(2) eap_peap: (TLS) Handshake state - before SSL initialization
(2) eap_peap: (TLS) Handshake state - Server before SSL initialization
(2) eap_peap: (TLS) Handshake state - Server before SSL initialization
(2) eap_peap: (TLS) recv TLS 1.3 Handshake, ClientHello
(2) eap_peap: (TLS) Handshake state - Server SSLv3/TLS read client hello
(2) eap_peap: (TLS) send TLS 1.2 Handshake, ServerHello
(2) eap_peap: (TLS) Handshake state - Server SSLv3/TLS write server hello
(2) eap_peap: (TLS) send TLS 1.2 Handshake, Certificate
(2) eap_peap: (TLS) Handshake state - Server SSLv3/TLS write certificate
(2) eap_peap: (TLS) send TLS 1.2 Handshake, ServerKeyExchange
(2) eap_peap: (TLS) Handshake state - Server SSLv3/TLS write key exchange
(2) eap_peap: (TLS) send TLS 1.2 Handshake, ServerHelloDone
(2) eap_peap: (TLS) Handshake state - Server SSLv3/TLS write server done
(2) eap_peap: (TLS) Server : Need to read more data: SSLv3/TLS write server
done
(2) eap_peap: (TLS) In Handshake Phase
(2) eap: Sending EAP Request (code 1) ID 1 length 1004
(2) eap: EAP session adding &reply:State = 0xbe5e90bfbc5f897e
(2)     [eap] = handled
(2)   } # authenticate = handled
(2) Using Post-Auth-Type Challenge
(2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(2)   Challenge { ... } # empty sub-section is ignored
(2) session-state: Saving cached attributes
(2)   Framed-MTU = 994
(2)   TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello"
(2)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello"
(2)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate"
(2)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake,
ServerKeyExchange"
(2)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake,
ServerHelloDone"
(2) Sent Access-Challenge Id 102 from 192.168.2.124:1812 to
192.168.5.122:37035 length 1068
(2)   EAP-Message =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(2)   Message-Authenticator = 0x00000000000000000000000000000000
(2)   State = 0xbe5e90bfbc5f897e1fec683d113a9433
(2) Finished request
Waking up in 4.9 seconds.
(3) Received Access-Request Id 103 from 192.168.5.122:37035 to
192.168.2.124:1812 length 246
(3)   User-Name = "allan"
(3)   NAS-IP-Address = 192.168.5.122
(3)   NAS-Identifier = "62223237ad69"
(3)   Called-Station-Id = "62-22-32-37-AD-69:TestLP"
(3)   NAS-Port-Type = Wireless-802.11
(3)   Service-Type = Framed-User
(3)   Calling-Station-Id = "9C-30-5B-FF-57-C7"
(3)   Connect-Info = "CONNECT 0Mbps 802.11g"
(3)   Acct-Session-Id = "4F42900D48C05B30"
(3)   Acct-Multi-Session-Id = "C4E290913619F242"
(3)   WLAN-Pairwise-Cipher = 1027076
(3)   WLAN-Group-Cipher = 1027076
(3)   WLAN-AKM-Suite = 1027077
(3)   WLAN-Group-Mgmt-Cipher = 1027078
(3)   Filter-Id = "wpa-eap"
(3)   Framed-MTU = 1400
(3)   EAP-Message = 0x020100061900
(3)   State = 0xbe5e90bfbc5f897e1fec683d113a9433
(3)   Message-Authenticator = 0x04067c606dc663fd6b1f84f9f230e053
(3) Restoring &session-state
(3)   &session-state:Framed-MTU = 994
(3)   &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3
Handshake, ClientHello"
(3)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, ServerHello"
(3)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, Certificate"
(3)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, ServerKeyExchange"
(3)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, ServerHelloDone"
(3) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(3)   authorize {
(3)     policy filter_username {
(3)       if (&User-Name) {
(3)       if (&User-Name)  -> TRUE
(3)       if (&User-Name)  {
(3)         if (&User-Name =~ / /) {
(3)         if (&User-Name =~ / /)  -> FALSE
(3)         if (&User-Name =~ /@[^@]*@/ ) {
(3)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(3)         if (&User-Name =~ /\.\./ ) {
(3)         if (&User-Name =~ /\.\./ )  -> FALSE
(3)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(3)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(3)         if (&User-Name =~ /\.$/)  {
(3)         if (&User-Name =~ /\.$/)   -> FALSE
(3)         if (&User-Name =~ /@\./)  {
(3)         if (&User-Name =~ /@\./)   -> FALSE
(3)       } # if (&User-Name)  = notfound
(3)     } # policy filter_username = notfound
(3)     [preprocess] = ok
(3)     [chap] = noop
(3)     [mschap] = noop
(3)     [digest] = noop
(3) suffix: Checking for suffix after "@"
(3) suffix: No '@' in User-Name = "allan", looking up realm NULL
(3) suffix: No such realm "NULL"
(3)     [suffix] = noop
(3) eap: Peer sent EAP Response (code 2) ID 1 length 6
(3) eap: Continuing tunnel setup
(3)     [eap] = ok
(3)   } # authorize = ok
(3) Found Auth-Type = eap
(3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(3)   authenticate {
(3) eap: Expiring EAP session with state 0xbe5e90bfbc5f897e
(3) eap: Finished EAP session with state 0xbe5e90bfbc5f897e
(3) eap: Previous EAP request found for state 0xbe5e90bfbc5f897e, released
from the list
(3) eap: Peer sent packet with method EAP PEAP (25)
(3) eap: Calling submodule eap_peap to process data
(3) eap_peap: (TLS) Peer ACKed our handshake fragment
(3) eap: Sending EAP Request (code 1) ID 2 length 171
(3) eap: EAP session adding &reply:State = 0xbe5e90bfbd5c897e
(3)     [eap] = handled
(3)   } # authenticate = handled
(3) Using Post-Auth-Type Challenge
(3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(3)   Challenge { ... } # empty sub-section is ignored
(3) session-state: Saving cached attributes
(3)   Framed-MTU = 994
(3)   TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello"
(3)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello"
(3)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate"
(3)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake,
ServerKeyExchange"
(3)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake,
ServerHelloDone"
(3) Sent Access-Challenge Id 103 from 192.168.2.124:1812 to
192.168.5.122:37035 length 229
(3)   EAP-Message =
0x010200ab190033e205eb26a7b0e9bc7997ad9345f8b5931674f523d8e4461794515178f4a7
7e8e20944a0dd9bc4ea1890fc68b7799b544fba35b13ef7919b05b716d3b0e12334124cfe393
9c9dfac61c9a502c7656986800f513bddf742be986a6d14909f56267122c5c04a2093a5d4bd4
b0ca335050d1737b1af2443358afa6a24ac17f3a4b8f4a0647671bdc0d3d9d11023de78c4e98
1d323ddc90186d6fd51f5b16030300040e000000
(3)   Message-Authenticator = 0x00000000000000000000000000000000
(3)   State = 0xbe5e90bfbd5c897e1fec683d113a9433
(3) Finished request
Waking up in 4.9 seconds.
(4) Received Access-Request Id 104 from 192.168.5.122:37035 to
192.168.2.124:1812 length 343
(4)   User-Name = "allan"
(4)   NAS-IP-Address = 192.168.5.122
(4)   NAS-Identifier = "62223237ad69"
(4)   Called-Station-Id = "62-22-32-37-AD-69:TestLP"
(4)   NAS-Port-Type = Wireless-802.11
(4)   Service-Type = Framed-User
(4)   Calling-Station-Id = "9C-30-5B-FF-57-C7"
(4)   Connect-Info = "CONNECT 0Mbps 802.11g"
(4)   Acct-Session-Id = "4F42900D48C05B30"
(4)   Acct-Multi-Session-Id = "C4E290913619F242"
(4)   WLAN-Pairwise-Cipher = 1027076
(4)   WLAN-Group-Cipher = 1027076
(4)   WLAN-AKM-Suite = 1027077
(4)   WLAN-Group-Mgmt-Cipher = 1027078
(4)   Filter-Id = "wpa-eap"
(4)   Framed-MTU = 1400
(4)   EAP-Message =
0x0202006719800000005d16030300251000002120016176b9170c31bdd407fa5bfc7952c01e
b2f7a8b56887ff0b6d1e6d8e2d0a2214030300010116030300280000000000000000d1687819
23a438e86441b94ffd0e0f7ba7fd46f2cc7666b0e065ba2ca03aff0f
(4)   State = 0xbe5e90bfbd5c897e1fec683d113a9433
(4)   Message-Authenticator = 0x001457380a1d038890226978cac9b672
(4) Restoring &session-state
(4)   &session-state:Framed-MTU = 994
(4)   &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3
Handshake, ClientHello"
(4)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, ServerHello"
(4)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, Certificate"
(4)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, ServerKeyExchange"
(4)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, ServerHelloDone"
(4) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(4)   authorize {
(4)     policy filter_username {
(4)       if (&User-Name) {
(4)       if (&User-Name)  -> TRUE
(4)       if (&User-Name)  {
(4)         if (&User-Name =~ / /) {
(4)         if (&User-Name =~ / /)  -> FALSE
(4)         if (&User-Name =~ /@[^@]*@/ ) {
(4)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(4)         if (&User-Name =~ /\.\./ ) {
(4)         if (&User-Name =~ /\.\./ )  -> FALSE
(4)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(4)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(4)         if (&User-Name =~ /\.$/)  {
(4)         if (&User-Name =~ /\.$/)   -> FALSE
(4)         if (&User-Name =~ /@\./)  {
(4)         if (&User-Name =~ /@\./)   -> FALSE
(4)       } # if (&User-Name)  = notfound
(4)     } # policy filter_username = notfound
(4)     [preprocess] = ok
(4)     [chap] = noop
(4)     [mschap] = noop
(4)     [digest] = noop
(4) suffix: Checking for suffix after "@"
(4) suffix: No '@' in User-Name = "allan", looking up realm NULL
(4) suffix: No such realm "NULL"
(4)     [suffix] = noop
(4) eap: Peer sent EAP Response (code 2) ID 2 length 103
(4) eap: Continuing tunnel setup
(4)     [eap] = ok
(4)   } # authorize = ok
(4) Found Auth-Type = eap
(4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(4)   authenticate {
(4) eap: Expiring EAP session with state 0xbe5e90bfbd5c897e
(4) eap: Finished EAP session with state 0xbe5e90bfbd5c897e
(4) eap: Previous EAP request found for state 0xbe5e90bfbd5c897e, released
from the list
(4) eap: Peer sent packet with method EAP PEAP (25)
(4) eap: Calling submodule eap_peap to process data
(4) eap_peap: (TLS) EAP Peer says that the final record size will be 93
bytes
(4) eap_peap: (TLS) EAP Got all data (93 bytes)
(4) eap_peap: (TLS) Handshake state - Server SSLv3/TLS write server done
(4) eap_peap: (TLS) recv TLS 1.2 Handshake, ClientKeyExchange
(4) eap_peap: (TLS) Handshake state - Server SSLv3/TLS read client key
exchange
(4) eap_peap: (TLS) Handshake state - Server SSLv3/TLS read change cipher
spec
(4) eap_peap: (TLS) recv TLS 1.2 Handshake, Finished
(4) eap_peap: (TLS) Handshake state - Server SSLv3/TLS read finished
(4) eap_peap: (TLS) send TLS 1.2 ChangeCipherSpec
(4) eap_peap: (TLS) Handshake state - Server SSLv3/TLS write change cipher
spec
(4) eap_peap: (TLS) send TLS 1.2 Handshake, Finished
(4) eap_peap: (TLS) Handshake state - Server SSLv3/TLS write finished
(4) eap_peap: (TLS) Handshake state - SSL negotiation finished successfully
(4) eap_peap: (TLS) Connection Established
(4) eap_peap:   TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"
(4) eap_peap:   TLS-Session-Version = "TLS 1.2"
(4) eap: Sending EAP Request (code 1) ID 3 length 57
(4) eap: EAP session adding &reply:State = 0xbe5e90bfba5d897e
(4)     [eap] = handled
(4)   } # authenticate = handled
(4) Using Post-Auth-Type Challenge
(4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(4)   Challenge { ... } # empty sub-section is ignored
(4) session-state: Saving cached attributes
(4)   Framed-MTU = 994
(4)   TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello"
(4)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello"
(4)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate"
(4)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake,
ServerKeyExchange"
(4)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake,
ServerHelloDone"
(4)   TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake,
ClientKeyExchange"
(4)   TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished"
(4)   TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec"
(4)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished"
(4)   TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"
(4)   TLS-Session-Version = "TLS 1.2"
(4) Sent Access-Challenge Id 104 from 192.168.2.124:1812 to
192.168.5.122:37035 length 115
(4)   EAP-Message =
0x01030039190014030300010116030300280c33919c73d07e1321e924e7966c00869172f231
64a26225f60498230a2032b3369d0d5accfdf80f
(4)   Message-Authenticator = 0x00000000000000000000000000000000
(4)   State = 0xbe5e90bfba5d897e1fec683d113a9433
(4) Finished request
Waking up in 4.9 seconds.
(5) Received Access-Request Id 105 from 192.168.5.122:37035 to
192.168.2.124:1812 length 246
(5)   User-Name = "allan"
(5)   NAS-IP-Address = 192.168.5.122
(5)   NAS-Identifier = "62223237ad69"
(5)   Called-Station-Id = "62-22-32-37-AD-69:TestLP"
(5)   NAS-Port-Type = Wireless-802.11
(5)   Service-Type = Framed-User
(5)   Calling-Station-Id = "9C-30-5B-FF-57-C7"
(5)   Connect-Info = "CONNECT 0Mbps 802.11g"
(5)   Acct-Session-Id = "4F42900D48C05B30"
(5)   Acct-Multi-Session-Id = "C4E290913619F242"
(5)   WLAN-Pairwise-Cipher = 1027076
(5)   WLAN-Group-Cipher = 1027076
(5)   WLAN-AKM-Suite = 1027077
(5)   WLAN-Group-Mgmt-Cipher = 1027078
(5)   Filter-Id = "wpa-eap"
(5)   Framed-MTU = 1400
(5)   EAP-Message = 0x020300061900
(5)   State = 0xbe5e90bfba5d897e1fec683d113a9433
(5)   Message-Authenticator = 0x10da78f8f0426bd9317a65f569037fda
(5) Restoring &session-state
(5)   &session-state:Framed-MTU = 994
(5)   &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3
Handshake, ClientHello"
(5)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, ServerHello"
(5)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, Certificate"
(5)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, ServerKeyExchange"
(5)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, ServerHelloDone"
(5)   &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2
Handshake, ClientKeyExchange"
(5)   &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2
Handshake, Finished"
(5)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
ChangeCipherSpec"
(5)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, Finished"
(5)   &session-state:TLS-Session-Cipher-Suite =
"ECDHE-RSA-AES256-GCM-SHA384"
(5)   &session-state:TLS-Session-Version = "TLS 1.2"
(5) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(5)   authorize {
(5)     policy filter_username {
(5)       if (&User-Name) {
(5)       if (&User-Name)  -> TRUE
(5)       if (&User-Name)  {
(5)         if (&User-Name =~ / /) {
(5)         if (&User-Name =~ / /)  -> FALSE
(5)         if (&User-Name =~ /@[^@]*@/ ) {
(5)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(5)         if (&User-Name =~ /\.\./ ) {
(5)         if (&User-Name =~ /\.\./ )  -> FALSE
(5)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(5)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(5)         if (&User-Name =~ /\.$/)  {
(5)         if (&User-Name =~ /\.$/)   -> FALSE
(5)         if (&User-Name =~ /@\./)  {
(5)         if (&User-Name =~ /@\./)   -> FALSE
(5)       } # if (&User-Name)  = notfound
(5)     } # policy filter_username = notfound
(5)     [preprocess] = ok
(5)     [chap] = noop
(5)     [mschap] = noop
(5)     [digest] = noop
(5) suffix: Checking for suffix after "@"
(5) suffix: No '@' in User-Name = "allan", looking up realm NULL
(5) suffix: No such realm "NULL"
(5)     [suffix] = noop
(5) eap: Peer sent EAP Response (code 2) ID 3 length 6
(5) eap: Continuing tunnel setup
(5)     [eap] = ok
(5)   } # authorize = ok
(5) Found Auth-Type = eap
(5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(5)   authenticate {
(5) eap: Expiring EAP session with state 0xbe5e90bfba5d897e
(5) eap: Finished EAP session with state 0xbe5e90bfba5d897e
(5) eap: Previous EAP request found for state 0xbe5e90bfba5d897e, released
from the list
(5) eap: Peer sent packet with method EAP PEAP (25)
(5) eap: Calling submodule eap_peap to process data
(5) eap_peap: (TLS) Peer ACKed our handshake fragment.  handshake is
finished
(5) eap_peap: Session established.  Decoding tunneled attributes
(5) eap_peap: PEAP state TUNNEL ESTABLISHED
(5) eap: Sending EAP Request (code 1) ID 4 length 40
(5) eap: EAP session adding &reply:State = 0xbe5e90bfbb5a897e
(5)     [eap] = handled
(5)   } # authenticate = handled
(5) Using Post-Auth-Type Challenge
(5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(5)   Challenge { ... } # empty sub-section is ignored
(5) session-state: Saving cached attributes
(5)   Framed-MTU = 994
(5)   TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello"
(5)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello"
(5)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate"
(5)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake,
ServerKeyExchange"
(5)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake,
ServerHelloDone"
(5)   TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake,
ClientKeyExchange"
(5)   TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished"
(5)   TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec"
(5)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished"
(5)   TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"
(5)   TLS-Session-Version = "TLS 1.2"
(5) Sent Access-Challenge Id 105 from 192.168.2.124:1812 to
192.168.5.122:37035 length 98
(5)   EAP-Message =
0x010400281900170303001d0c33919c73d07e147c5cb343f67cdcad81596b76f896e8cbcbc0
0eb6b3
(5)   Message-Authenticator = 0x00000000000000000000000000000000
(5)   State = 0xbe5e90bfbb5a897e1fec683d113a9433
(5) Finished request
Waking up in 3.9 seconds.
(6) Received Access-Request Id 106 from 192.168.5.122:37035 to
192.168.2.124:1812 length 281
(6)   User-Name = "allan"
(6)   NAS-IP-Address = 192.168.5.122
(6)   NAS-Identifier = "62223237ad69"
(6)   Called-Station-Id = "62-22-32-37-AD-69:TestLP"
(6)   NAS-Port-Type = Wireless-802.11
(6)   Service-Type = Framed-User
(6)   Calling-Station-Id = "9C-30-5B-FF-57-C7"
(6)   Connect-Info = "CONNECT 0Mbps 802.11g"
(6)   Acct-Session-Id = "4F42900D48C05B30"
(6)   Acct-Multi-Session-Id = "C4E290913619F242"
(6)   WLAN-Pairwise-Cipher = 1027076
(6)   WLAN-Group-Cipher = 1027076
(6)   WLAN-AKM-Suite = 1027077
(6)   WLAN-Group-Mgmt-Cipher = 1027078
(6)   Filter-Id = "wpa-eap"
(6)   Framed-MTU = 1400
(6)   EAP-Message =
0x020400291900170303001e0000000000000001856be726c147ab0d11960828a7242ef5b687
a7b94fce
(6)   State = 0xbe5e90bfbb5a897e1fec683d113a9433
(6)   Message-Authenticator = 0xa3453956037a371f607a0aa0197a1324
(6) Restoring &session-state
(6)   &session-state:Framed-MTU = 994
(6)   &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3
Handshake, ClientHello"
(6)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, ServerHello"
(6)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, Certificate"
(6)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, ServerKeyExchange"
(6)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, ServerHelloDone"
(6)   &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2
Handshake, ClientKeyExchange"
(6)   &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2
Handshake, Finished"
(6)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
ChangeCipherSpec"
(6)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, Finished"
(6)   &session-state:TLS-Session-Cipher-Suite =
"ECDHE-RSA-AES256-GCM-SHA384"
(6)   &session-state:TLS-Session-Version = "TLS 1.2"
(6) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(6)   authorize {
(6)     policy filter_username {
(6)       if (&User-Name) {
(6)       if (&User-Name)  -> TRUE
(6)       if (&User-Name)  {
(6)         if (&User-Name =~ / /) {
(6)         if (&User-Name =~ / /)  -> FALSE
(6)         if (&User-Name =~ /@[^@]*@/ ) {
(6)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(6)         if (&User-Name =~ /\.\./ ) {
(6)         if (&User-Name =~ /\.\./ )  -> FALSE
(6)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(6)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(6)         if (&User-Name =~ /\.$/)  {
(6)         if (&User-Name =~ /\.$/)   -> FALSE
(6)         if (&User-Name =~ /@\./)  {
(6)         if (&User-Name =~ /@\./)   -> FALSE
(6)       } # if (&User-Name)  = notfound
(6)     } # policy filter_username = notfound
(6)     [preprocess] = ok
(6)     [chap] = noop
(6)     [mschap] = noop
(6)     [digest] = noop
(6) suffix: Checking for suffix after "@"
(6) suffix: No '@' in User-Name = "allan", looking up realm NULL
(6) suffix: No such realm "NULL"
(6)     [suffix] = noop
(6) eap: Peer sent EAP Response (code 2) ID 4 length 41
(6) eap: Continuing tunnel setup
(6)     [eap] = ok
(6)   } # authorize = ok
(6) Found Auth-Type = eap
(6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(6)   authenticate {
(6) eap: Expiring EAP session with state 0xbe5e90bfbb5a897e
(6) eap: Finished EAP session with state 0xbe5e90bfbb5a897e
(6) eap: Previous EAP request found for state 0xbe5e90bfbb5a897e, released
from the list
(6) eap: Peer sent packet with method EAP PEAP (25)
(6) eap: Calling submodule eap_peap to process data
(6) eap_peap: (TLS) EAP Done initial handshake
(6) eap_peap: Session established.  Decoding tunneled attributes
(6) eap_peap: PEAP state WAITING FOR INNER IDENTITY
(6) eap_peap: Identity - allan
(6) eap_peap: Got inner identity 'allan'
(6) eap_peap: Setting default EAP type for tunneled EAP session
(6) eap_peap: Got tunneled request
(6) eap_peap:   EAP-Message = 0x0204000a01616c6c616e
(6) eap_peap: Setting User-Name to allan
(6) eap_peap: Sending tunneled request to inner-tunnel
(6) eap_peap:   EAP-Message = 0x0204000a01616c6c616e
(6) eap_peap:   FreeRADIUS-Proxied-To = 127.0.0.1
(6) eap_peap:   User-Name = "allan"
(6) Virtual server inner-tunnel received request
(6)   EAP-Message = 0x0204000a01616c6c616e
(6)   FreeRADIUS-Proxied-To = 127.0.0.1
(6)   User-Name = "allan"
(6) WARNING: Outer and inner identities are the same.  User privacy is
compromised.
(6) server inner-tunnel {
(6)   # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/inner-tunnel
(6)     authorize {
(6)       policy filter_username {
(6)         if (&User-Name) {
(6)         if (&User-Name)  -> TRUE
(6)         if (&User-Name)  {
(6)           if (&User-Name =~ / /) {
(6)           if (&User-Name =~ / /)  -> FALSE
(6)           if (&User-Name =~ /@[^@]*@/ ) {
(6)           if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(6)           if (&User-Name =~ /\.\./ ) {
(6)           if (&User-Name =~ /\.\./ )  -> FALSE
(6)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(6)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(6)           if (&User-Name =~ /\.$/)  {
(6)           if (&User-Name =~ /\.$/)   -> FALSE
(6)           if (&User-Name =~ /@\./)  {
(6)           if (&User-Name =~ /@\./)   -> FALSE
(6)         } # if (&User-Name)  = notfound
(6)       } # policy filter_username = notfound
(6)       [chap] = noop
(6)       [mschap] = noop
(6) suffix: Checking for suffix after "@"
(6) suffix: No '@' in User-Name = "allan", looking up realm NULL
(6) suffix: No such realm "NULL"
(6)       [suffix] = noop
(6)       update control {
(6)         &Proxy-To-Realm := LOCAL
(6)       } # update control = noop
(6) eap: Peer sent EAP Response (code 2) ID 4 length 10
(6) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest
of authorize
(6)       [eap] = ok
(6)     } # authorize = ok
(6)   Found Auth-Type = eap
(6)   # Executing group from file
/etc/freeradius/3.0/sites-enabled/inner-tunnel
(6)     authenticate {
(6) eap: Peer sent packet with method EAP Identity (1)
(6) eap: Calling submodule eap_mschapv2 to process data
(6) eap_mschapv2: Issuing Challenge
(6) eap: Sending EAP Request (code 1) ID 5 length 42
(6) eap: EAP session adding &reply:State = 0xed638baded6691b6
(6)       [eap] = handled
(6)     } # authenticate = handled
(6) } # server inner-tunnel
(6) Virtual server sending reply
(6)   EAP-Message =
0x0105002a1a01050025109d3852ca07db2176dfe67bbba554c4fc667265657261646975732d
332e322e31
(6)   Message-Authenticator = 0x00000000000000000000000000000000
(6)   State = 0xed638baded6691b68be489c80a2c9a3e
(6) eap_peap: Got tunneled reply code 11
(6) eap_peap:   EAP-Message =
0x0105002a1a01050025109d3852ca07db2176dfe67bbba554c4fc667265657261646975732d
332e322e31
(6) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000
(6) eap_peap:   State = 0xed638baded6691b68be489c80a2c9a3e
(6) eap_peap: Got tunneled reply RADIUS code 11
(6) eap_peap:   EAP-Message =
0x0105002a1a01050025109d3852ca07db2176dfe67bbba554c4fc667265657261646975732d
332e322e31
(6) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000
(6) eap_peap:   State = 0xed638baded6691b68be489c80a2c9a3e
(6) eap_peap: Got tunneled Access-Challenge
(6) eap: Sending EAP Request (code 1) ID 5 length 73
(6) eap: EAP session adding &reply:State = 0xbe5e90bfb85b897e
(6)     [eap] = handled
(6)   } # authenticate = handled
(6) Using Post-Auth-Type Challenge
(6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(6)   Challenge { ... } # empty sub-section is ignored
(6) session-state: Saving cached attributes
(6)   Framed-MTU = 994
(6)   TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello"
(6)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello"
(6)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate"
(6)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake,
ServerKeyExchange"
(6)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake,
ServerHelloDone"
(6)   TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake,
ClientKeyExchange"
(6)   TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished"
(6)   TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec"
(6)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished"
(6)   TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"
(6)   TLS-Session-Version = "TLS 1.2"
(6) Sent Access-Challenge Id 106 from 192.168.2.124:1812 to
192.168.5.122:37035 length 131
(6)   EAP-Message =
0x010500491900170303003e0c33919c73d07e157dafa67fcc601fad81f4ab3d19832a9f888e
8b6b6e88a3f183c22ca35b1d2e20f85ba542042dbda5ad614a234502ac64612bf6596065
(6)   Message-Authenticator = 0x00000000000000000000000000000000
(6)   State = 0xbe5e90bfb85b897e1fec683d113a9433
(6) Finished request
Waking up in 3.8 seconds.
(7) Received Access-Request Id 107 from 192.168.5.122:37035 to
192.168.2.124:1812 length 335
(7)   User-Name = "allan"
(7)   NAS-IP-Address = 192.168.5.122
(7)   NAS-Identifier = "62223237ad69"
(7)   Called-Station-Id = "62-22-32-37-AD-69:TestLP"
(7)   NAS-Port-Type = Wireless-802.11
(7)   Service-Type = Framed-User
(7)   Calling-Station-Id = "9C-30-5B-FF-57-C7"
(7)   Connect-Info = "CONNECT 0Mbps 802.11g"
(7)   Acct-Session-Id = "4F42900D48C05B30"
(7)   Acct-Multi-Session-Id = "C4E290913619F242"
(7)   WLAN-Pairwise-Cipher = 1027076
(7)   WLAN-Group-Cipher = 1027076
(7)   WLAN-AKM-Suite = 1027077
(7)   WLAN-Group-Mgmt-Cipher = 1027078
(7)   Filter-Id = "wpa-eap"
(7)   Framed-MTU = 1400
(7)   EAP-Message =
0x0205005f190017030300540000000000000002a61b2f0d1d090b51e589f263c65a04a13e08
7b99a0e043c231ec296aa84d77e8b15f94075fcf1faea10393f8d0636325c1d19af5dd3555a3
fe8eeecf6a4baa8a0b6ff2972ae1579ef963752e
(7)   State = 0xbe5e90bfb85b897e1fec683d113a9433
(7)   Message-Authenticator = 0xceaf8d8737ec657cb30cdbabc02f8a0b
(7) Restoring &session-state
(7)   &session-state:Framed-MTU = 994
(7)   &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3
Handshake, ClientHello"
(7)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, ServerHello"
(7)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, Certificate"
(7)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, ServerKeyExchange"
(7)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, ServerHelloDone"
(7)   &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2
Handshake, ClientKeyExchange"
(7)   &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2
Handshake, Finished"
(7)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
ChangeCipherSpec"
(7)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, Finished"
(7)   &session-state:TLS-Session-Cipher-Suite =
"ECDHE-RSA-AES256-GCM-SHA384"
(7)   &session-state:TLS-Session-Version = "TLS 1.2"
(7) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(7)   authorize {
(7)     policy filter_username {
(7)       if (&User-Name) {
(7)       if (&User-Name)  -> TRUE
(7)       if (&User-Name)  {
(7)         if (&User-Name =~ / /) {
(7)         if (&User-Name =~ / /)  -> FALSE
(7)         if (&User-Name =~ /@[^@]*@/ ) {
(7)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(7)         if (&User-Name =~ /\.\./ ) {
(7)         if (&User-Name =~ /\.\./ )  -> FALSE
(7)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(7)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(7)         if (&User-Name =~ /\.$/)  {
(7)         if (&User-Name =~ /\.$/)   -> FALSE
(7)         if (&User-Name =~ /@\./)  {
(7)         if (&User-Name =~ /@\./)   -> FALSE
(7)       } # if (&User-Name)  = notfound
(7)     } # policy filter_username = notfound
(7)     [preprocess] = ok
(7)     [chap] = noop
(7)     [mschap] = noop
(7)     [digest] = noop
(7) suffix: Checking for suffix after "@"
(7) suffix: No '@' in User-Name = "allan", looking up realm NULL
(7) suffix: No such realm "NULL"
(7)     [suffix] = noop
(7) eap: Peer sent EAP Response (code 2) ID 5 length 95
(7) eap: Continuing tunnel setup
(7)     [eap] = ok
(7)   } # authorize = ok
(7) Found Auth-Type = eap
(7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(7)   authenticate {
(7) eap: Expiring EAP session with state 0xed638baded6691b6
(7) eap: Finished EAP session with state 0xbe5e90bfb85b897e
(7) eap: Previous EAP request found for state 0xbe5e90bfb85b897e, released
from the list
(7) eap: Peer sent packet with method EAP PEAP (25)
(7) eap: Calling submodule eap_peap to process data
(7) eap_peap: (TLS) EAP Done initial handshake
(7) eap_peap: Session established.  Decoding tunneled attributes
(7) eap_peap: PEAP state phase2
(7) eap_peap: EAP method MSCHAPv2 (26)
(7) eap_peap: Got tunneled request
(7) eap_peap:   EAP-Message =
0x020500401a0205003b31dc589b4b65e369c6f6d99e80780ac2190000000000000000cb4911
8d1c89b35369259b51ef278084dac462c90d55337f00616c6c616e
(7) eap_peap: Setting User-Name to allan
(7) eap_peap: Sending tunneled request to inner-tunnel
(7) eap_peap:   EAP-Message =
0x020500401a0205003b31dc589b4b65e369c6f6d99e80780ac2190000000000000000cb4911
8d1c89b35369259b51ef278084dac462c90d55337f00616c6c616e
(7) eap_peap:   FreeRADIUS-Proxied-To = 127.0.0.1
(7) eap_peap:   User-Name = "allan"
(7) eap_peap:   State = 0xed638baded6691b68be489c80a2c9a3e
(7) Virtual server inner-tunnel received request
(7)   EAP-Message =
0x020500401a0205003b31dc589b4b65e369c6f6d99e80780ac2190000000000000000cb4911
8d1c89b35369259b51ef278084dac462c90d55337f00616c6c616e
(7)   FreeRADIUS-Proxied-To = 127.0.0.1
(7)   User-Name = "allan"
(7)   State = 0xed638baded6691b68be489c80a2c9a3e
(7) WARNING: Outer and inner identities are the same.  User privacy is
compromised.
(7) server inner-tunnel {
(7)   session-state: No cached attributes
(7)   # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/inner-tunnel
(7)     authorize {
(7)       policy filter_username {
(7)         if (&User-Name) {
(7)         if (&User-Name)  -> TRUE
(7)         if (&User-Name)  {
(7)           if (&User-Name =~ / /) {
(7)           if (&User-Name =~ / /)  -> FALSE
(7)           if (&User-Name =~ /@[^@]*@/ ) {
(7)           if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(7)           if (&User-Name =~ /\.\./ ) {
(7)           if (&User-Name =~ /\.\./ )  -> FALSE
(7)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(7)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(7)           if (&User-Name =~ /\.$/)  {
(7)           if (&User-Name =~ /\.$/)   -> FALSE
(7)           if (&User-Name =~ /@\./)  {
(7)           if (&User-Name =~ /@\./)   -> FALSE
(7)         } # if (&User-Name)  = notfound
(7)       } # policy filter_username = notfound
(7)       [chap] = noop
(7)       [mschap] = noop
(7) suffix: Checking for suffix after "@"
(7) suffix: No '@' in User-Name = "allan", looking up realm NULL
(7) suffix: No such realm "NULL"
(7)       [suffix] = noop
(7)       update control {
(7)         &Proxy-To-Realm := LOCAL
(7)       } # update control = noop
(7) eap: Peer sent EAP Response (code 2) ID 5 length 64
(7) eap: No EAP Start, assuming it's an on-going EAP conversation
(7)       [eap] = updated
(7)       [files] = noop
(7) sql: EXPAND %{User-Name}
(7) sql:    --> allan
(7) sql: SQL-User-Name set to 'allan'
rlm_sql (sql): Reserved connection (2)
(7) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck
WHERE username = '%{SQL-User-Name}' ORDER BY id
(7) sql:    --> SELECT id, username, attribute, value, op FROM radcheck
WHERE username = 'allan' ORDER BY id
(7) sql: Executing select query: SELECT id, username, attribute, value, op
FROM radcheck WHERE username = 'allan' ORDER BY id
(7) sql: User found in radcheck table
(7) sql: Conditional check items matched, merging assignment check items
(7) sql:   Cleartext-Password := "teste1234"
(7) sql: EXPAND SELECT id, username, attribute, value, op FROM radreply
WHERE username = '%{SQL-User-Name}' ORDER BY id
(7) sql:    --> SELECT id, username, attribute, value, op FROM radreply
WHERE username = 'allan' ORDER BY id
(7) sql: Executing select query: SELECT id, username, attribute, value, op
FROM radreply WHERE username = 'allan' ORDER BY id
(7) sql: EXPAND SELECT groupname FROM radusergroup WHERE username =
'%{SQL-User-Name}' ORDER BY priority
(7) sql:    --> SELECT groupname FROM radusergroup WHERE username = 'allan'
ORDER BY priority
(7) sql: Executing select query: SELECT groupname FROM radusergroup WHERE
username = 'allan' ORDER BY priority
(7) sql: User found in the group table
(7) sql: EXPAND SELECT id, groupname, attribute, Value, op FROM
radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY id
(7) sql:    --> SELECT id, groupname, attribute, Value, op FROM
radgroupcheck WHERE groupname = 'wifi' ORDER BY id
(7) sql: Executing select query: SELECT id, groupname, attribute, Value, op
FROM radgroupcheck WHERE groupname = 'wifi' ORDER BY id
(7) sql: Group "wifi": Conditional check items matched
(7) sql: Group "wifi": Merging assignment check items
(7) sql:   Simultaneous-Use := 1
(7) sql: EXPAND SELECT id, groupname, attribute, value, op FROM
radgroupreply WHERE groupname = '%{SQL-Group}' ORDER BY id
(7) sql:    --> SELECT id, groupname, attribute, value, op FROM
radgroupreply WHERE groupname = 'wifi' ORDER BY id
(7) sql: Executing select query: SELECT id, groupname, attribute, value, op
FROM radgroupreply WHERE groupname = 'wifi' ORDER BY id
(7) sql: Group "wifi": Merging reply items
rlm_sql (sql): Released connection (2)
Need more connections to reach 10 spares
rlm_sql (sql): Opening additional connection (7), 1 of 25 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
WARNING: MYSQL_OPT_RECONNECT is deprecated and will be removed in a future
version.
rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket,
server version 5.5.5-10.11.2-MariaDB-1, protocol version 10
(7)       [sql] = ok
(7)       [expiration] = noop
(7)       [logintime] = noop
(7) pap: WARNING: Auth-Type already set.  Not setting to PAP
(7)       [pap] = noop
(7)     } # authorize = updated
(7)   Found Auth-Type = eap
(7)   # Executing group from file
/etc/freeradius/3.0/sites-enabled/inner-tunnel
(7)     authenticate {
(7) eap: Expiring EAP session with state 0xed638baded6691b6
(7) eap: Finished EAP session with state 0xed638baded6691b6
(7) eap: Previous EAP request found for state 0xed638baded6691b6, released
from the list
(7) eap: Peer sent packet with method EAP MSCHAPv2 (26)
(7) eap: Calling submodule eap_mschapv2 to process data
(7) eap_mschapv2: # Executing group from file
/etc/freeradius/3.0/sites-enabled/inner-tunnel
(7) eap_mschapv2:   authenticate {
(7) mschap: Found Cleartext-Password, hashing to create NT-Password
(7) mschap: Creating challenge hash with username: allan
(7) mschap: Client is using MS-CHAPv2
(7) mschap: Adding MS-CHAPv2 MPPE keys
(7) eap_mschapv2:     [mschap] = ok
(7) eap_mschapv2:   } # authenticate = ok
(7) eap_mschapv2: MSCHAP Success
(7) eap: Sending EAP Request (code 1) ID 6 length 51
(7) eap: EAP session adding &reply:State = 0xed638badec6591b6
(7)       [eap] = handled
(7)     } # authenticate = handled
(7) } # server inner-tunnel
(7) Virtual server sending reply
(7)   EAP-Message =
0x010600331a0305002e533d4235424232423243303541463735344444324138364132443341
3930333838423731424338343144
(7)   Message-Authenticator = 0x00000000000000000000000000000000
(7)   State = 0xed638badec6591b68be489c80a2c9a3e
(7) eap_peap: Got tunneled reply code 11
(7) eap_peap:   EAP-Message =
0x010600331a0305002e533d4235424232423243303541463735344444324138364132443341
3930333838423731424338343144
(7) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000
(7) eap_peap:   State = 0xed638badec6591b68be489c80a2c9a3e
(7) eap_peap: Got tunneled reply RADIUS code 11
(7) eap_peap:   EAP-Message =
0x010600331a0305002e533d4235424232423243303541463735344444324138364132443341
3930333838423731424338343144
(7) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000
(7) eap_peap:   State = 0xed638badec6591b68be489c80a2c9a3e
(7) eap_peap: Got tunneled Access-Challenge
(7) eap: Sending EAP Request (code 1) ID 6 length 82
(7) eap: EAP session adding &reply:State = 0xbe5e90bfb958897e
(7)     [eap] = handled
(7)   } # authenticate = handled
(7) Using Post-Auth-Type Challenge
(7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(7)   Challenge { ... } # empty sub-section is ignored
(7) session-state: Saving cached attributes
(7)   Framed-MTU = 994
(7)   TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello"
(7)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello"
(7)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate"
(7)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake,
ServerKeyExchange"
(7)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake,
ServerHelloDone"
(7)   TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake,
ClientKeyExchange"
(7)   TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished"
(7)   TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec"
(7)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished"
(7)   TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"
(7)   TLS-Session-Version = "TLS 1.2"
(7) Sent Access-Challenge Id 107 from 192.168.2.124:1812 to
192.168.5.122:37035 length 140
(7)   EAP-Message =
0x01060052190017030300470c33919c73d07e16ccd89e095ce4558f14c7614b42832eac8ab3
12aa296eebb7fd2dcc4c4bf693f961c3e2a586f6a6858070eb80b1e857dfa9b498f48b615a56
04eef0f7a30fcd
(7)   Message-Authenticator = 0x00000000000000000000000000000000
(7)   State = 0xbe5e90bfb958897e1fec683d113a9433
(7) Finished request
Waking up in 3.8 seconds.
(8) Received Access-Request Id 108 from 192.168.5.122:37035 to
192.168.2.124:1812 length 277
(8)   User-Name = "allan"
(8)   NAS-IP-Address = 192.168.5.122
(8)   NAS-Identifier = "62223237ad69"
(8)   Called-Station-Id = "62-22-32-37-AD-69:TestLP"
(8)   NAS-Port-Type = Wireless-802.11
(8)   Service-Type = Framed-User
(8)   Calling-Station-Id = "9C-30-5B-FF-57-C7"
(8)   Connect-Info = "CONNECT 0Mbps 802.11g"
(8)   Acct-Session-Id = "4F42900D48C05B30"
(8)   Acct-Multi-Session-Id = "C4E290913619F242"
(8)   WLAN-Pairwise-Cipher = 1027076
(8)   WLAN-Group-Cipher = 1027076
(8)   WLAN-AKM-Suite = 1027077
(8)   WLAN-Group-Mgmt-Cipher = 1027078
(8)   Filter-Id = "wpa-eap"
(8)   Framed-MTU = 1400
(8)   EAP-Message =
0x020600251900170303001a000000000000000359f20e12bf0abb1492aa92af8c1154eeaab9
(8)   State = 0xbe5e90bfb958897e1fec683d113a9433
(8)   Message-Authenticator = 0xef11ff65c0ac70a4cc756030903a4781
(8) Restoring &session-state
(8)   &session-state:Framed-MTU = 994
(8)   &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3
Handshake, ClientHello"
(8)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, ServerHello"
(8)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, Certificate"
(8)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, ServerKeyExchange"
(8)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, ServerHelloDone"
(8)   &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2
Handshake, ClientKeyExchange"
(8)   &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2
Handshake, Finished"
(8)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
ChangeCipherSpec"
(8)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, Finished"
(8)   &session-state:TLS-Session-Cipher-Suite =
"ECDHE-RSA-AES256-GCM-SHA384"
(8)   &session-state:TLS-Session-Version = "TLS 1.2"
(8) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(8)   authorize {
(8)     policy filter_username {
(8)       if (&User-Name) {
(8)       if (&User-Name)  -> TRUE
(8)       if (&User-Name)  {
(8)         if (&User-Name =~ / /) {
(8)         if (&User-Name =~ / /)  -> FALSE
(8)         if (&User-Name =~ /@[^@]*@/ ) {
(8)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(8)         if (&User-Name =~ /\.\./ ) {
(8)         if (&User-Name =~ /\.\./ )  -> FALSE
(8)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(8)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(8)         if (&User-Name =~ /\.$/)  {
(8)         if (&User-Name =~ /\.$/)   -> FALSE
(8)         if (&User-Name =~ /@\./)  {
(8)         if (&User-Name =~ /@\./)   -> FALSE
(8)       } # if (&User-Name)  = notfound
(8)     } # policy filter_username = notfound
(8)     [preprocess] = ok
(8)     [chap] = noop
(8)     [mschap] = noop
(8)     [digest] = noop
(8) suffix: Checking for suffix after "@"
(8) suffix: No '@' in User-Name = "allan", looking up realm NULL
(8) suffix: No such realm "NULL"
(8)     [suffix] = noop
(8) eap: Peer sent EAP Response (code 2) ID 6 length 37
(8) eap: Continuing tunnel setup
(8)     [eap] = ok
(8)   } # authorize = ok
(8) Found Auth-Type = eap
(8) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(8)   authenticate {
(8) eap: Expiring EAP session with state 0xed638badec6591b6
(8) eap: Finished EAP session with state 0xbe5e90bfb958897e
(8) eap: Previous EAP request found for state 0xbe5e90bfb958897e, released
from the list
(8) eap: Peer sent packet with method EAP PEAP (25)
(8) eap: Calling submodule eap_peap to process data
(8) eap_peap: (TLS) EAP Done initial handshake
(8) eap_peap: Session established.  Decoding tunneled attributes
(8) eap_peap: PEAP state phase2
(8) eap_peap: EAP method MSCHAPv2 (26)
(8) eap_peap: Got tunneled request
(8) eap_peap:   EAP-Message = 0x020600061a03
(8) eap_peap: Setting User-Name to allan
(8) eap_peap: Sending tunneled request to inner-tunnel
(8) eap_peap:   EAP-Message = 0x020600061a03
(8) eap_peap:   FreeRADIUS-Proxied-To = 127.0.0.1
(8) eap_peap:   User-Name = "allan"
(8) eap_peap:   State = 0xed638badec6591b68be489c80a2c9a3e
(8) Virtual server inner-tunnel received request
(8)   EAP-Message = 0x020600061a03
(8)   FreeRADIUS-Proxied-To = 127.0.0.1
(8)   User-Name = "allan"
(8)   State = 0xed638badec6591b68be489c80a2c9a3e
(8) WARNING: Outer and inner identities are the same.  User privacy is
compromised.
(8) server inner-tunnel {
(8)   session-state: No cached attributes
(8)   # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/inner-tunnel
(8)     authorize {
(8)       policy filter_username {
(8)         if (&User-Name) {
(8)         if (&User-Name)  -> TRUE
(8)         if (&User-Name)  {
(8)           if (&User-Name =~ / /) {
(8)           if (&User-Name =~ / /)  -> FALSE
(8)           if (&User-Name =~ /@[^@]*@/ ) {
(8)           if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(8)           if (&User-Name =~ /\.\./ ) {
(8)           if (&User-Name =~ /\.\./ )  -> FALSE
(8)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(8)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(8)           if (&User-Name =~ /\.$/)  {
(8)           if (&User-Name =~ /\.$/)   -> FALSE
(8)           if (&User-Name =~ /@\./)  {
(8)           if (&User-Name =~ /@\./)   -> FALSE
(8)         } # if (&User-Name)  = notfound
(8)       } # policy filter_username = notfound
(8)       [chap] = noop
(8)       [mschap] = noop
(8) suffix: Checking for suffix after "@"
(8) suffix: No '@' in User-Name = "allan", looking up realm NULL
(8) suffix: No such realm "NULL"
(8)       [suffix] = noop
(8)       update control {
(8)         &Proxy-To-Realm := LOCAL
(8)       } # update control = noop
(8) eap: Peer sent EAP Response (code 2) ID 6 length 6
(8) eap: No EAP Start, assuming it's an on-going EAP conversation
(8)       [eap] = updated
(8)       [files] = noop
(8) sql: EXPAND %{User-Name}
(8) sql:    --> allan
(8) sql: SQL-User-Name set to 'allan'
rlm_sql (sql): Reserved connection (3)
(8) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck
WHERE username = '%{SQL-User-Name}' ORDER BY id
(8) sql:    --> SELECT id, username, attribute, value, op FROM radcheck
WHERE username = 'allan' ORDER BY id
(8) sql: Executing select query: SELECT id, username, attribute, value, op
FROM radcheck WHERE username = 'allan' ORDER BY id
(8) sql: User found in radcheck table
(8) sql: Conditional check items matched, merging assignment check items
(8) sql:   Cleartext-Password := "teste1234"
(8) sql: EXPAND SELECT id, username, attribute, value, op FROM radreply
WHERE username = '%{SQL-User-Name}' ORDER BY id
(8) sql:    --> SELECT id, username, attribute, value, op FROM radreply
WHERE username = 'allan' ORDER BY id
(8) sql: Executing select query: SELECT id, username, attribute, value, op
FROM radreply WHERE username = 'allan' ORDER BY id
(8) sql: EXPAND SELECT groupname FROM radusergroup WHERE username =
'%{SQL-User-Name}' ORDER BY priority
(8) sql:    --> SELECT groupname FROM radusergroup WHERE username = 'allan'
ORDER BY priority
(8) sql: Executing select query: SELECT groupname FROM radusergroup WHERE
username = 'allan' ORDER BY priority
(8) sql: User found in the group table
(8) sql: EXPAND SELECT id, groupname, attribute, Value, op FROM
radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY id
(8) sql:    --> SELECT id, groupname, attribute, Value, op FROM
radgroupcheck WHERE groupname = 'wifi' ORDER BY id
(8) sql: Executing select query: SELECT id, groupname, attribute, Value, op
FROM radgroupcheck WHERE groupname = 'wifi' ORDER BY id
(8) sql: Group "wifi": Conditional check items matched
(8) sql: Group "wifi": Merging assignment check items
(8) sql:   Simultaneous-Use := 1
(8) sql: EXPAND SELECT id, groupname, attribute, value, op FROM
radgroupreply WHERE groupname = '%{SQL-Group}' ORDER BY id
(8) sql:    --> SELECT id, groupname, attribute, value, op FROM
radgroupreply WHERE groupname = 'wifi' ORDER BY id
(8) sql: Executing select query: SELECT id, groupname, attribute, value, op
FROM radgroupreply WHERE groupname = 'wifi' ORDER BY id
(8) sql: Group "wifi": Merging reply items
rlm_sql (sql): Released connection (3)
(8)       [sql] = ok
(8)       [expiration] = noop
(8)       [logintime] = noop
(8) pap: WARNING: Auth-Type already set.  Not setting to PAP
(8)       [pap] = noop
(8)     } # authorize = updated
(8)   Found Auth-Type = eap
(8)   # Executing group from file
/etc/freeradius/3.0/sites-enabled/inner-tunnel
(8)     authenticate {
(8) eap: Expiring EAP session with state 0xed638badec6591b6
(8) eap: Finished EAP session with state 0xed638badec6591b6
(8) eap: Previous EAP request found for state 0xed638badec6591b6, released
from the list
(8) eap: Peer sent packet with method EAP MSCHAPv2 (26)
(8) eap: Calling submodule eap_mschapv2 to process data
(8) eap: Sending EAP Success (code 3) ID 6 length 4
(8) eap: Freeing handler
(8)       [eap] = ok
(8)     } # authenticate = ok
(8)   # Executing section session from file
/etc/freeradius/3.0/sites-enabled/inner-tunnel
(8)     session {
(8) radutmp: EXPAND /var/log/freeradius/radutmp
(8) radutmp:    --> /var/log/freeradius/radutmp
(8) radutmp: EXPAND %{User-Name}
(8) radutmp:    --> allan
(8)       [radutmp] = ok
(8)     } # session = ok
(8)   # Executing section post-auth from file
/etc/freeradius/3.0/sites-enabled/inner-tunnel
(8)     post-auth {
(8) sql: EXPAND .query
(8) sql:    --> .query
(8) sql: Using query template 'query'
rlm_sql (sql): Reserved connection (4)
(8) sql: EXPAND %{User-Name}
(8) sql:    --> allan
(8) sql: SQL-User-Name set to 'allan'
(8) sql: EXPAND INSERT INTO radpostauth (username, pass, reply, authdate )
VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}',
'%{reply:Packet-Type}', '%S.%M' )
(8) sql:    --> INSERT INTO radpostauth (username, pass, reply, authdate )
VALUES ( 'allan', '', 'Access-Accept', '2023-10-10 11:34:26.248564' )
(8) sql: Executing query: INSERT INTO radpostauth (username, pass, reply,
authdate ) VALUES ( 'allan', '', 'Access-Accept', '2023-10-10
11:34:26.248564' )
(8) sql: SQL query returned: success
(8) sql: 1 record(s) updated
rlm_sql (sql): Released connection (4)
(8)       [sql] = ok
(8)       if (0) {
(8)       if (0)  -> FALSE
(8)     } # post-auth = ok
(8) } # server inner-tunnel
(8) Virtual server sending reply
(8)   MS-MPPE-Encryption-Policy = Encryption-Allowed
(8)   MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed
(8)   MS-MPPE-Send-Key = 0x1ff08b8c79f7d2f2c2711fbe1f337d17
(8)   MS-MPPE-Recv-Key = 0xbda9b1a2f2ce96ba044316d5af766a30
(8)   EAP-Message = 0x03060004
(8)   Message-Authenticator = 0x00000000000000000000000000000000
(8)   User-Name = "allan"
(8) eap_peap: Got tunneled reply code 2
(8) eap_peap:   MS-MPPE-Encryption-Policy = Encryption-Allowed
(8) eap_peap:   MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed
(8) eap_peap:   MS-MPPE-Send-Key = 0x1ff08b8c79f7d2f2c2711fbe1f337d17
(8) eap_peap:   MS-MPPE-Recv-Key = 0xbda9b1a2f2ce96ba044316d5af766a30
(8) eap_peap:   EAP-Message = 0x03060004
(8) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000
(8) eap_peap:   User-Name = "allan"
(8) eap_peap: Got tunneled reply RADIUS code 2
(8) eap_peap:   MS-MPPE-Encryption-Policy = Encryption-Allowed
(8) eap_peap:   MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed
(8) eap_peap:   MS-MPPE-Send-Key = 0x1ff08b8c79f7d2f2c2711fbe1f337d17
(8) eap_peap:   MS-MPPE-Recv-Key = 0xbda9b1a2f2ce96ba044316d5af766a30
(8) eap_peap:   EAP-Message = 0x03060004
(8) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000
(8) eap_peap:   User-Name = "allan"
(8) eap_peap: Tunneled authentication was successful
(8) eap_peap: SUCCESS
(8) eap: Sending EAP Request (code 1) ID 7 length 46
(8) eap: EAP session adding &reply:State = 0xbe5e90bfb659897e
(8)     [eap] = handled
(8)   } # authenticate = handled
(8) Using Post-Auth-Type Challenge
(8) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(8)   Challenge { ... } # empty sub-section is ignored
(8) session-state: Saving cached attributes
(8)   Framed-MTU = 994
(8)   TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello"
(8)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello"
(8)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate"
(8)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake,
ServerKeyExchange"
(8)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake,
ServerHelloDone"
(8)   TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake,
ClientKeyExchange"
(8)   TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished"
(8)   TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec"
(8)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished"
(8)   TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"
(8)   TLS-Session-Version = "TLS 1.2"
(8) Sent Access-Challenge Id 108 from 192.168.2.124:1812 to
192.168.5.122:37035 length 104
(8)   EAP-Message =
0x0107002e190017030300230c33919c73d07e17ac83230d979d46a54bff9d2c52568f723129
672f593303dbc87dec
(8)   Message-Authenticator = 0x00000000000000000000000000000000
(8)   State = 0xbe5e90bfb659897e1fec683d113a9433
(8) Finished request
Waking up in 3.8 seconds.
(9) Received Access-Request Id 109 from 192.168.5.122:37035 to
192.168.2.124:1812 length 286
(9)   User-Name = "allan"
(9)   NAS-IP-Address = 192.168.5.122
(9)   NAS-Identifier = "62223237ad69"
(9)   Called-Station-Id = "62-22-32-37-AD-69:TestLP"
(9)   NAS-Port-Type = Wireless-802.11
(9)   Service-Type = Framed-User
(9)   Calling-Station-Id = "9C-30-5B-FF-57-C7"
(9)   Connect-Info = "CONNECT 0Mbps 802.11g"
(9)   Acct-Session-Id = "4F42900D48C05B30"
(9)   Acct-Multi-Session-Id = "C4E290913619F242"
(9)   WLAN-Pairwise-Cipher = 1027076
(9)   WLAN-Group-Cipher = 1027076
(9)   WLAN-AKM-Suite = 1027077
(9)   WLAN-Group-Mgmt-Cipher = 1027078
(9)   Filter-Id = "wpa-eap"
(9)   Framed-MTU = 1400
(9)   EAP-Message =
0x0207002e190017030300230000000000000004ef4b4fd724ba801ea9e25cdf94e640b09a76
ec9e8dec479a6b58ea
(9)   State = 0xbe5e90bfb659897e1fec683d113a9433
(9)   Message-Authenticator = 0x73c5d70713c64563bbaa66afd3a40572
(9) Restoring &session-state
(9)   &session-state:Framed-MTU = 994
(9)   &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3
Handshake, ClientHello"
(9)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, ServerHello"
(9)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, Certificate"
(9)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, ServerKeyExchange"
(9)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, ServerHelloDone"
(9)   &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2
Handshake, ClientKeyExchange"
(9)   &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2
Handshake, Finished"
(9)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
ChangeCipherSpec"
(9)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, Finished"
(9)   &session-state:TLS-Session-Cipher-Suite =
"ECDHE-RSA-AES256-GCM-SHA384"
(9)   &session-state:TLS-Session-Version = "TLS 1.2"
(9) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(9)   authorize {
(9)     policy filter_username {
(9)       if (&User-Name) {
(9)       if (&User-Name)  -> TRUE
(9)       if (&User-Name)  {
(9)         if (&User-Name =~ / /) {
(9)         if (&User-Name =~ / /)  -> FALSE
(9)         if (&User-Name =~ /@[^@]*@/ ) {
(9)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(9)         if (&User-Name =~ /\.\./ ) {
(9)         if (&User-Name =~ /\.\./ )  -> FALSE
(9)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(9)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(9)         if (&User-Name =~ /\.$/)  {
(9)         if (&User-Name =~ /\.$/)   -> FALSE
(9)         if (&User-Name =~ /@\./)  {
(9)         if (&User-Name =~ /@\./)   -> FALSE
(9)       } # if (&User-Name)  = notfound
(9)     } # policy filter_username = notfound
(9)     [preprocess] = ok
(9)     [chap] = noop
(9)     [mschap] = noop
(9)     [digest] = noop
(9) suffix: Checking for suffix after "@"
(9) suffix: No '@' in User-Name = "allan", looking up realm NULL
(9) suffix: No such realm "NULL"
(9)     [suffix] = noop
(9) eap: Peer sent EAP Response (code 2) ID 7 length 46
(9) eap: Continuing tunnel setup
(9)     [eap] = ok
(9)   } # authorize = ok
(9) Found Auth-Type = eap
(9) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(9)   authenticate {
(9) eap: Expiring EAP session with state 0xbe5e90bfb659897e
(9) eap: Finished EAP session with state 0xbe5e90bfb659897e
(9) eap: Previous EAP request found for state 0xbe5e90bfb659897e, released
from the list
(9) eap: Peer sent packet with method EAP PEAP (25)
(9) eap: Calling submodule eap_peap to process data
(9) eap_peap: (TLS) EAP Done initial handshake
(9) eap_peap: Session established.  Decoding tunneled attributes
(9) eap_peap: PEAP state send tlv success
(9) eap_peap: Received EAP-TLV response
(9) eap_peap: Success
(9) eap: Sending EAP Success (code 3) ID 7 length 4
(9) eap: Freeing handler
(9)     [eap] = ok
(9)   } # authenticate = ok
(9) # Executing section post-auth from file
/etc/freeradius/3.0/sites-enabled/default
(9)   post-auth {
(9)     if (session-state:User-Name && reply:User-Name && request:User-Name
&& (reply:User-Name == request:User-Name)) {
(9)     if (session-state:User-Name && reply:User-Name && request:User-Name
&& (reply:User-Name == request:User-Name))  -> FALSE
(9)     update {
(9)       &reply::Framed-MTU += &session-state:Framed-MTU[*] -> 994
(9)       &reply::TLS-Session-Information +=
&session-state:TLS-Session-Information[*] -> '(TLS) recv TLS 1.3 Handshake,
ClientHello'
(9)       &reply::TLS-Session-Information +=
&session-state:TLS-Session-Information[*] -> '(TLS) send TLS 1.2 Handshake,
ServerHello'
(9)       &reply::TLS-Session-Information +=
&session-state:TLS-Session-Information[*] -> '(TLS) send TLS 1.2 Handshake,
Certificate'
(9)       &reply::TLS-Session-Information +=
&session-state:TLS-Session-Information[*] -> '(TLS) send TLS 1.2 Handshake,
ServerKeyExchange'
(9)       &reply::TLS-Session-Information +=
&session-state:TLS-Session-Information[*] -> '(TLS) send TLS 1.2 Handshake,
ServerHelloDone'
(9)       &reply::TLS-Session-Information +=
&session-state:TLS-Session-Information[*] -> '(TLS) recv TLS 1.2 Handshake,
ClientKeyExchange'
(9)       &reply::TLS-Session-Information +=
&session-state:TLS-Session-Information[*] -> '(TLS) recv TLS 1.2 Handshake,
Finished'
(9)       &reply::TLS-Session-Information +=
&session-state:TLS-Session-Information[*] -> '(TLS) send TLS 1.2
ChangeCipherSpec'
(9)       &reply::TLS-Session-Information +=
&session-state:TLS-Session-Information[*] -> '(TLS) send TLS 1.2 Handshake,
Finished'
(9)       &reply::TLS-Session-Cipher-Suite +=
&session-state:TLS-Session-Cipher-Suite[*] -> 'ECDHE-RSA-AES256-GCM-SHA384'
(9)       &reply::TLS-Session-Version +=
&session-state:TLS-Session-Version[*] -> 'TLS 1.2'
(9)     } # update = noop
(9) sql: EXPAND .query
(9) sql:    --> .query
(9) sql: Using query template 'query'
rlm_sql (sql): Reserved connection (0)
(9) sql: EXPAND %{User-Name}
(9) sql:    --> allan
(9) sql: SQL-User-Name set to 'allan'
(9) sql: EXPAND INSERT INTO radpostauth (username, pass, reply, authdate )
VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}',
'%{reply:Packet-Type}', '%S.%M' )
(9) sql:    --> INSERT INTO radpostauth (username, pass, reply, authdate )
VALUES ( 'allan', '', 'Access-Accept', '2023-10-10 11:34:26.264822' )
(9) sql: Executing query: INSERT INTO radpostauth (username, pass, reply,
authdate ) VALUES ( 'allan', '', 'Access-Accept', '2023-10-10
11:34:26.264822' )
(9) sql: SQL query returned: success
(9) sql: 1 record(s) updated
rlm_sql (sql): Released connection (0)
(9)     [sql] = ok
(9)     [exec] = noop
(9)     policy remove_reply_message_if_eap {
(9)       if (&reply:EAP-Message && &reply:Reply-Message) {
(9)       if (&reply:EAP-Message && &reply:Reply-Message)  -> FALSE
(9)       else {
(9)         [noop] = noop
(9)       } # else = noop
(9)     } # policy remove_reply_message_if_eap = noop
(9)     if (EAP-Key-Name && &reply:EAP-Session-Id) {
(9)     if (EAP-Key-Name && &reply:EAP-Session-Id)  -> FALSE
(9)   } # post-auth = ok
(9) Sent Access-Accept Id 109 from 192.168.2.124:1812 to 192.168.5.122:37035
length 173
(9)   MS-MPPE-Recv-Key =
0x3c7bdb7a1c70a1c50f2b9fd1624f7c7956b428dbdb3bbe1fac10fba0bf5c5b49
(9)   MS-MPPE-Send-Key =
0x40c56dcbf651086c283d1e13ede5ace435e78134e23bb3600bb86dfbb69dd839
(9)   EAP-Message = 0x03070004
(9)   Message-Authenticator = 0x00000000000000000000000000000000
(9)   User-Name = "allan"
(9)   Framed-MTU += 994
(9) Finished request
Waking up in 3.8 seconds.
(0) Cleaning up request packet ID 100 with timestamp +12 due to
cleanup_delay was reached
(1) Cleaning up request packet ID 101 with timestamp +12 due to
cleanup_delay was reached
(2) Cleaning up request packet ID 102 with timestamp +12 due to
cleanup_delay was reached
(3) Cleaning up request packet ID 103 with timestamp +12 due to
cleanup_delay was reached
(4) Cleaning up request packet ID 104 with timestamp +12 due to
cleanup_delay was reached
Waking up in 1.0 seconds.
(5) Cleaning up request packet ID 105 with timestamp +13 due to
cleanup_delay was reached
(6) Cleaning up request packet ID 106 with timestamp +13 due to
cleanup_delay was reached
(7) Cleaning up request packet ID 107 with timestamp +13 due to
cleanup_delay was reached
(8) Cleaning up request packet ID 108 with timestamp +13 due to
cleanup_delay was reached
(9) Cleaning up request packet ID 109 with timestamp +13 due to
cleanup_delay was reached
Ready to process requests

How setup simultaneous-use?

ti.suporte＠lupusequipamentos.com.br