Free radius authentication with active directory using leap module

28 Nov 2011

      Hi,

Would greatly someone's help on this. I need free radius to authenticate with using wpa.
...
From the local radtest I can see, it is authenticating fine but when testing with a wpa device, this is the error m getting on the debug log:
I just need it to work from wireless device, I think it is the eap.conf part.

Would greatly appreciate someone's help on this:::

FreeRADIUS Debugging Output

This colorized output was produced by an automated tool from Network RADIUS

FreeRADIUS Version 2.1.7, for host x86_64-redhat-linux-gnu, built on Mar 31 2010 at 00:14:28
Copyright (C) 1999-2009 The FreeRADIUS server project and contributors.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License v2.
Starting - reading configuration files ...
including configuration file /etc/raddb/radiusd.conf
including configuration file /etc/raddb/proxy.conf
including configuration file /etc/raddb/clients.conf
including files in directory /etc/raddb/modules/
including configuration file /etc/raddb/modules/detail.example.com
including configuration file /etc/raddb/modules/smsotp
including configuration file /etc/raddb/modules/sradutmp
including configuration file /etc/raddb/modules/sqlcounter_expire_on_login
including configuration file /etc/raddb/modules/otp
including configuration file /etc/raddb/modules/realm
including configuration file /etc/raddb/modules/sql_log
including configuration file /etc/raddb/modules/logintime
including configuration file /etc/raddb/modules/inner-eap
including configuration file /etc/raddb/modules/checkval
including configuration file /etc/raddb/modules/linelog
including configuration file /etc/raddb/modules/pam
including configuration file /etc/raddb/modules/passwd
including configuration file /etc/raddb/modules/preprocess
including configuration file /etc/raddb/modules/attr_filter
including configuration file /etc/raddb/modules/unix
including configuration file /etc/raddb/modules/wimax
including configuration file /etc/raddb/modules/chap
including configuration file /etc/raddb/modules/files
including configuration file /etc/raddb/modules/mac2ip
including configuration file /etc/raddb/modules/echo
including configuration file /etc/raddb/modules/radutmp
including configuration file /etc/raddb/modules/always
including configuration file /etc/raddb/modules/etc_group
including configuration file /etc/raddb/modules/detail
including configuration file /etc/raddb/modules/attr_rewrite
including configuration file /etc/raddb/modules/exec
including configuration file /etc/raddb/modules/policy
including configuration file /etc/raddb/modules/pap
including configuration file /etc/raddb/modules/expr
including configuration file /etc/raddb/modules/acct_unique
including configuration file /etc/raddb/modules/ippool
including configuration file /etc/raddb/modules/perl
including configuration file /etc/raddb/modules/ldap
including configuration file /etc/raddb/modules/counter
including configuration file /etc/raddb/modules/digest
including configuration file /etc/raddb/modules/smbpasswd
including configuration file /etc/raddb/modules/detail.log
including configuration file /etc/raddb/modules/cui
including configuration file /etc/raddb/modules/OLD_ldap-ORIG
including configuration file /etc/raddb/modules/mac2vlan
including configuration file /etc/raddb/modules/expiration
including configuration file /etc/raddb/modules/mschap
including configuration file /etc/raddb/eap.conf
including configuration file /etc/raddb/policy.conf
including files in directory /etc/raddb/sites-enabled/
including configuration file /etc/raddb/sites-enabled/control-socket
including configuration file /etc/raddb/sites-enabled/inner-tunnel
including configuration file /etc/raddb/sites-enabled/default
group = radiusd
user = radiusd
including dictionary file /etc/raddb/dictionary
main {
        prefix = "/usr"
        localstatedir = "/var"
        logdir = "/var/log/radius"
        libdir = "/usr/lib64/freeradius"
        radacctdir = "/var/log/radius/radacct"
        hostname_lookups = no
        max_request_time = 30
        cleanup_delay = 5
        max_requests = 1024
        allow_core_dumps = no
        pidfile = "/var/run/radiusd/radiusd.pid"
        checkrad = "/usr/sbin/checkrad"
        debug_level = 0
        proxy_requests = yes
 log {
        stripped_names = no
        auth = yes
        auth_badpass = no
        auth_goodpass = no
        msg_badpass = "Host %n"
        msg_goodpass = "Host %n"
 }
 security {
        max_attributes = 200
        reject_delay = 3
        status_server = yes
 }
}
radiusd: #### Loading Realms and Home Servers ####
 proxy server {
        retry_delay = 5
        retry_count = 3
        default_fallback = no
        dead_time = 120
        wake_all_if_all_dead = no
 }
 home_server localhost {
        ipaddr = 127.0.0.1
        port = 1812
        type = "auth"
        secret = "testing123"
        response_window = 20
        max_outstanding = 65536
        require_message_authenticator = no
        zombie_period = 40
        status_check = "status-server"
        ping_interval = 30
        check_interval = 30
        num_answers_to_alive = 3
        num_pings_to_alive = 3
        revive_interval = 120
        status_check_timeout = 4
        irt = 2
        mrt = 16
        mrc = 5
        mrd = 30
 }
 home_server_pool my_auth_failover {
        type = fail-over
        home_server = localhost
 }
 realm example.com {
        auth_pool = my_auth_failover
 }
 realm LOCAL {
 }
radiusd: #### Loading Clients ####
 client localhost {
        ipaddr = 127.0.0.1
        require_message_authenticator = no
        secret = "testing123"
        shortname = "localhost"
        nastype = "other"
 }
 client 10.38.0.3 {
        require_message_authenticator = no
        secret = "EduroamACUwlan"
        shortname = "acubluecoat"
        nastype = "other"
 }
radiusd: #### Instantiating modules ####
 instantiate {
 Module: Linked to module rlm_exec
 Module: Instantiating exec
  exec {
        wait = no
        input_pairs = "request"
        shell_escape = yes
  }
 Module: Linked to module rlm_expr
 Module: Instantiating expr
 Module: Linked to module rlm_expiration
 Module: Instantiating expiration
  expiration {
        reply-message = "Password Has Expired  "
  }
 Module: Linked to module rlm_logintime
 Module: Instantiating logintime
  logintime {
        reply-message = "You are calling outside your allowed timespan  "
        minimum-timeout = 60
  }
 }
radiusd: #### Loading Virtual Servers ####
server inner-tunnel {
 modules {
 Module: Checking authenticate {...} for more modules to load
 Module: Linked to module rlm_pap
 Module: Instantiating pap
  pap {
        encryption_scheme = "auto"
        auto_header = yes
  }
 Module: Linked to module rlm_ldap
 Module: Instantiating ldap
  ldap {
        server = "acustaff.acu.edu.au"
        port = 3268
        password = "9yRD1133"
        identity = "cn=Radauth,cn=Users,dc=acustaff,dc=acu,dc=edu,dc=au"
        net_timeout = 1
        timeout = 20
        timelimit = 20
        tls_mode = no
        start_tls = no
        tls_require_cert = "allow"
   tls {
        start_tls = no
        require_cert = "allow"
   }
        basedn = "dc=acu,dc=edu,dc=au"
        filter = "(&(sAMAccountName=%{Stripped-User-Name:-%{User-Name}}))"
        base_filter = "(objectclass=radiusprofile)"
        auto_header = no
        access_attr_used_for_allow = yes
        groupname_attribute = "cn"
        groupmembership_filter = "(|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))"
        groupmembership_attribute = "memberOf"
        dictionary_mapping = "/etc/raddb/ldap.attrmap"
        ldap_debug = 0
        ldap_connections_number = 5
        compare_check_items = no
        do_xlat = yes
        set_auth_type = yes
  }
rlm_ldap: Registering ldap_groupcmp for Ldap-Group
rlm_ldap: Registering ldap_xlat with xlat_name ldap
rlm_ldap: reading ldap<->radius mappings from file /etc/raddb/ldap.attrmap
rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$
rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$
rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type
rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use
rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id
rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS Calling-Station-Id
rlm_ldap: LDAP lmPassword mapped to RADIUS LM-Password
rlm_ldap: LDAP ntPassword mapped to RADIUS NT-Password
rlm_ldap: LDAP sambaLmPassword mapped to RADIUS LM-Password
rlm_ldap: LDAP sambaNtPassword mapped to RADIUS NT-Password
rlm_ldap: LDAP dBCSPwd mapped to RADIUS LM-Password
rlm_ldap: LDAP acctFlags mapped to RADIUS SMB-Account-CTRL-TEXT
rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration
rlm_ldap: LDAP radiusNASIpAddress mapped to RADIUS NAS-IP-Address
rlm_ldap: LDAP userPassword mapped to RADIUS Cleartext-Password
rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type
rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol
rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address
rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask
rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route
rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing
rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id
rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU
rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS Framed-Compression
rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host
rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service
rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port
rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number
rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id
rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS Framed-IPX-Network
rlm_ldap: LDAP radiusClass mapped to RADIUS Class
rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout
rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout
rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS Termination-Action
rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service
rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node
rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group
rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS Framed-AppleTalk-Link
rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS Framed-AppleTalk-Network
rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS Framed-AppleTalk-Zone
rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit
rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port
rlm_ldap: LDAP radiusReplyMessage mapped to RADIUS Reply-Message
rlm_ldap: LDAP radiusTunnelType mapped to RADIUS Tunnel-Type
rlm_ldap: LDAP radiusTunnelMediumType mapped to RADIUS Tunnel-Medium-Type
rlm_ldap: LDAP radiusTunnelPrivateGroupId mapped to RADIUS Tunnel-Private-Group-Id
conns: 0x1e9ceee0
 Module: Linked to module rlm_eap
 Module: Instantiating eap
  eap {
        default_eap_type = "peap"
        timer_expire = 60
        ignore_unknown_eap_types = no
        cisco_accounting_username_bug = no
        max_sessions = 2048
  }
 Module: Linked to sub-module rlm_eap_tls
 Module: Instantiating eap-tls
   tls {
        rsa_key_exchange = no
        dh_key_exchange = yes
        rsa_key_length = 512
        dh_key_length = 512
        verify_depth = 0
        pem_file_type = yes
        private_key_file = "/etc/raddb/certs/server.pem"
        certificate_file = "/etc/raddb/certs/server.pem"
        CA_file = "/etc/raddb/certs/ca.pem"
        private_key_password = "whatever"
        dh_file = "/etc/raddb/certs/dh"
        random_file = "/dev/urandom"
        fragment_size = 1024
        include_length = yes
        check_crl = no
        cipher_list = "DEFAULT"
        make_cert_command = "/etc/raddb/certs/bootstrap"
    cache {
        enable = no
        lifetime = 24
        max_entries = 255
    }
   }
 Module: Linked to sub-module rlm_eap_ttls
 Module: Instantiating eap-ttls
   ttls {
        default_eap_type = "md5"
        copy_request_to_tunnel = yes
        use_tunneled_reply = no
        virtual_server = "inner-tunnel"
        include_length = yes
   }
 Module: Linked to sub-module rlm_eap_peap
 Module: Instantiating eap-peap
   peap {
        default_eap_type = "mschapv2"
        copy_request_to_tunnel = no
        use_tunneled_reply = no
        proxy_tunneled_request_as_eap = yes
        virtual_server = "inner-tunnel"
   }
 Module: Linked to sub-module rlm_eap_mschapv2
 Module: Instantiating eap-mschapv2
   mschapv2 {
        with_ntdomain_hack = no
   }
 Module: Checking authorize {...} for more modules to load
 Module: Linked to module rlm_chap
 Module: Instantiating chap
 Module: Linked to module rlm_mschap
 Module: Instantiating mschap
  mschap {
        use_mppe = yes
        require_encryption = no
        require_strong = no
        with_ntdomain_hack = yes
  }
 Module: Linked to module rlm_unix
 Module: Instantiating unix
  unix {
        radwtmp = "/var/log/radius/radwtmp"
  }
 Module: Linked to module rlm_realm
 Module: Instantiating suffix
  realm suffix {
        format = "suffix"
        delimiter = "@"
        ignore_default = no
        ignore_null = no
  }
 Module: Linked to module rlm_files
 Module: Instantiating files
  files {
        usersfile = "/etc/raddb/users"
        acctusersfile = "/etc/raddb/acct_users"
        preproxy_usersfile = "/etc/raddb/preproxy_users"
        compat = "no"
  }
 Module: Checking session {...} for more modules to load
 Module: Linked to module rlm_radutmp
 Module: Instantiating radutmp
  radutmp {
        filename = "/var/log/radius/radutmp"
        username = "%{User-Name}"
        case_sensitive = yes
        check_with_nas = yes
        perm = 384
        callerid = yes
  }
 Module: Checking post-proxy {...} for more modules to load
 } # modules
} # server
server {
 modules {
 Module: Checking authenticate {...} for more modules to load
 Module: Checking authorize {...} for more modules to load
 Module: Linked to module rlm_preprocess
 Module: Instantiating preprocess
  preprocess {
        huntgroups = "/etc/raddb/huntgroups"
        hints = "/etc/raddb/hints"
        with_ascend_hack = no
        ascend_channels_per_line = 23
        with_ntdomain_hack = no
        with_specialix_jetstream_hack = no
        with_cisco_vsa_hack = no
        with_alvarion_vsa_hack = no
  }
 Module: Linked to module rlm_detail
 Module: Instantiating auth_log
  detail auth_log {
        detailfile = "/var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d"
        header = "%t"
        detailperm = 384
        dirperm = 493
        locking = no
        log_packet_header = no
  }
 Module: Checking preacct {...} for more modules to load
 Module: Linked to module rlm_acct_unique
 Module: Instantiating acct_unique
  acct_unique {
        key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port"
  }
 Module: Checking accounting {...} for more modules to load
 Module: Instantiating detail
  detail {
        detailfile = "/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d"
        header = "%t"
        detailperm = 384
        dirperm = 493
        locking = no
        log_packet_header = no
  }
 Module: Linked to module rlm_attr_filter
 Module: Instantiating attr_filter.accounting_response
  attr_filter attr_filter.accounting_response {
        attrsfile = "/etc/raddb/attrs.accounting_response"
        key = "%{User-Name}"
  }
 Module: Checking session {...} for more modules to load
 Module: Checking post-auth {...} for more modules to load
 Module: Instantiating attr_filter.access_reject
  attr_filter attr_filter.access_reject {
        attrsfile = "/etc/raddb/attrs.access_reject"
        key = "%{User-Name}"
  }
 } # modules
} # server
radiusd: #### Opening IP addresses and Ports ####
listen {
        type = "auth"
        ipaddr = *
        port = 0
}
listen {
        type = "acct"
        ipaddr = *
        port = 0
}
listen {
        type = "control"
 listen {
        socket = "/var/run/radiusd/radiusd.sock"
 }
}
Listening on authentication address * port 1812
Listening on accounting address * port 1813
Listening on command file /var/run/radiusd/radiusd.sock
Listening on proxy address * port 1814
Ready to process requests.
Packet 0
rad_recv: Access-Request packet from host 10.38.0.3 port 32769, id=237, length=236
        User-Name = "uldaptest"
        Calling-Station-Id = "d0-23-db-e8-b6-01"
        Called-Station-Id = "e8-ba-70-9c-a3-d0:acubluecoat"
        NAS-Port = 1
        Cisco-AVPair = "audit-session-id=0a26000300007fac4ed31076"
        NAS-IP-Address = 10.38.0.3
        NAS-Identifier = "MAKWLC5508-1"
        Airespace-Wlan-Id = 4
        Service-Type = Framed-User
        Framed-MTU = 1300
        NAS-Port-Type = Wireless-802.11
        Tunnel-Type:0 = VLAN
        Tunnel-Medium-Type:0 = IEEE-802
        Tunnel-Private-Group-Id:0 = "19"
        EAP-Message = 0x0201000e01756c64617074657374
        Message-Authenticator = 0x60f3efa9af61cb0e0f5ad8534f494671
+- entering group authorize {...}
++[preprocess] returns ok
[auth_log]      expand: /var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d -> /var/log/radius/radacct/10.38.0.3/auth-detail-20111128
[auth_log] /var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /var/log/radius/radacct/10.38.0.3/auth-detail-20111128
[auth_log]      expand: %t -> Mon Nov 28 15:39:13 2011
++[auth_log] returns ok
[suffix] No '@' in User-Name = "uldaptest", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 1 length 14
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
[ldap] performing user authorization for uldaptest
[ldap] WARNING: Deprecated conditional expansion ":-".  See "man unlang" for details
[ldap]  expand: (&(sAMAccountName=%{Stripped-User-Name:-%{User-Name}})) -> (&(sAMAccountName=uldaptest))
[ldap]  expand: dc=acu,dc=edu,dc=au -> dc=acu,dc=edu,dc=au
rlm_ldap: ldap_get_conn: Checking Id: 0
rlm_ldap: ldap_get_conn: Got Id: 0
rlm_ldap: attempting LDAP reconnection
rlm_ldap: (re)connect to acustaff.acu.edu.au:3268, authentication 0
rlm_ldap: bind as cn=Radauth,cn=Users,dc=acustaff,dc=acu,dc=edu,dc=au/9yRD1133 to acustaff.acu.edu.au:3268
rlm_ldap: waiting for bind result ...
rlm_ldap: Bind was successful
rlm_ldap: performing search in dc=acu,dc=edu,dc=au, with filter (&(sAMAccountName=uldaptest))
[ldap] looking for check items in directory...
[ldap] looking for reply items in directory...
WARNING: No "known good" password was found in LDAP.  Are you sure that the user is configured correctly?
[ldap] user uldaptest authorized to use remote access
rlm_ldap: ldap_release_conn: Release Id: 0
++[ldap] returns ok
++[expiration] returns noop
++[logintime] returns noop
[pap] WARNING! No "known good" password found for the user.  Authentication may fail because of this.
++[pap] returns noop
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] EAP Identity
[eap] processing type tls
[tls] Initiate
[tls] Start returned 1
++[eap] returns handled
Sending Access-Challenge of id 237 to 10.38.0.3 port 32769
        EAP-Message = 0x010200061920
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0x0c78f6160c7aefab29789ce03c2fa122
Finished request 0.
Going to the next request
Waking up in 4.9 seconds.
Packet 1
rad_recv: Access-Request packet from host 10.38.0.3 port 32769, id=238, length=392
        User-Name = "uldaptest"
        Calling-Station-Id = "d0-23-db-e8-b6-01"
        Called-Station-Id = "e8-ba-70-9c-a3-d0:acubluecoat"
        NAS-Port = 1
        Cisco-AVPair = "audit-session-id=0a26000300007fac4ed31076"
        NAS-IP-Address = 10.38.0.3
        NAS-Identifier = "MAKWLC5508-1"
        Airespace-Wlan-Id = 4
        Service-Type = Framed-User
        Framed-MTU = 1300
        NAS-Port-Type = Wireless-802.11
        Tunnel-Type:0 = VLAN
        Tunnel-Medium-Type:0 = IEEE-802
        Tunnel-Private-Group-Id:0 = "19"
        EAP-Message = 0x0202009819800000008e16030100890100008503014ed31073 ...
        State = 0x0c78f6160c7aefab29789ce03c2fa122
        Message-Authenticator = 0x562b36ca8df14283f8e01ac8ac63a3c6
+- entering group authorize {...}
++[preprocess] returns ok
[auth_log]      expand: /var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d -> /var/log/radius/radacct/10.38.0.3/auth-detail-20111128
[auth_log] /var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /var/log/radius/radacct/10.38.0.3/auth-detail-20111128
[auth_log]      expand: %t -> Mon Nov 28 15:39:13 2011
++[auth_log] returns ok
[suffix] No '@' in User-Name = "uldaptest", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 2 length 152
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
  TLS Length 142
[peap] Length Included
[peap] eaptls_verify returned 11
[peap]     (other): before/accept initialization
[peap]     TLS_accept: before/accept initialization
[peap] <<< TLS 1.0 Handshake [length 0089], ClientHello
[peap]     TLS_accept: SSLv3 read client hello A
[peap] >>> TLS 1.0 Handshake [length 0031], ServerHello
[peap]     TLS_accept: SSLv3 write server hello A
[peap] >>> TLS 1.0 Handshake [length 08ec], Certificate
[peap]     TLS_accept: SSLv3 write certificate A
[peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone
[peap]     TLS_accept: SSLv3 write server done A
[peap]     TLS_accept: SSLv3 flush data
[peap]     TLS_accept: Need to read more data: SSLv3 read client certificate A
In SSL Handshake Phase
In SSL Accept mode
[peap] eaptls_process returned 13
[peap] EAPTLS_HANDLED
++[eap] returns handled
Sending Access-Challenge of id 238 to 10.38.0.3 port 32769
        EAP-Message = 0x0103040019c00000093016030100310200002d03014ed31071 ...
        EAP-Message = 0x22302006035504031319414355204365727469666963617465 ...
        EAP-Message = 0x00c51ed7ac80a20c32a6ef4bef301af76f54a9c4418ea270ad ...
        EAP-Message = 0xc8d5d9550203010001a317301530130603551d25040c300a06 ...
        EAP-Message = 0x8a2c7cd3db55a0a340e6b03d
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0x0c78f6160d7befab29789ce03c2fa122
Finished request 1.
Going to the next request
Waking up in 4.9 seconds.
Packet 2
rad_recv: Access-Request packet from host 10.38.0.3 port 32769, id=239, length=246
        User-Name = "uldaptest"
        Calling-Station-Id = "d0-23-db-e8-b6-01"
        Called-Station-Id = "e8-ba-70-9c-a3-d0:acubluecoat"
        NAS-Port = 1
        Cisco-AVPair = "audit-session-id=0a26000300007fac4ed31076"
        NAS-IP-Address = 10.38.0.3
        NAS-Identifier = "MAKWLC5508-1"
        Airespace-Wlan-Id = 4
        Service-Type = Framed-User
        Framed-MTU = 1300
        NAS-Port-Type = Wireless-802.11
        Tunnel-Type:0 = VLAN
        Tunnel-Medium-Type:0 = IEEE-802
        Tunnel-Private-Group-Id:0 = "19"
        EAP-Message = 0x020300061900
        State = 0x0c78f6160d7befab29789ce03c2fa122
        Message-Authenticator = 0x7be3f3e3ed49355a492cd374601855d2
+- entering group authorize {...}
++[preprocess] returns ok
[auth_log]      expand: /var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d -> /var/log/radius/radacct/10.38.0.3/auth-detail-20111128
[auth_log] /var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /var/log/radius/radacct/10.38.0.3/auth-detail-20111128
[auth_log]      expand: %t -> Mon Nov 28 15:39:13 2011
++[auth_log] returns ok
[suffix] No '@' in User-Name = "uldaptest", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 3 length 6
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
[peap] Received TLS ACK
[peap] ACK handshake fragment handler
[peap] eaptls_verify returned 1
[peap] eaptls_process returned 13
[peap] EAPTLS_HANDLED
++[eap] returns handled
Sending Access-Challenge of id 239 to 10.38.0.3 port 32769
        EAP-Message = 0x010403fc1940200c8fc5aa47d15440082858eca603fd5a1969 ...
        EAP-Message = 0x746966696361746520417574686f72697479301e170d313131 ...
        EAP-Message = 0x82010a0282010100a511292c7b417649db9c0f5cdd107a7df5 ...
        EAP-Message = 0x1384fd317e150826ed17d50203010001a38201183082011430 ...
        EAP-Message = 0x2043657274696669
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0x0c78f6160e7cefab29789ce03c2fa122
Finished request 2.
Going to the next request
Waking up in 4.9 seconds.
Packet 3
rad_recv: Access-Request packet from host 10.38.0.3 port 32769, id=240, length=246
        User-Name = "uldaptest"
        Calling-Station-Id = "d0-23-db-e8-b6-01"
        Called-Station-Id = "e8-ba-70-9c-a3-d0:acubluecoat"
        NAS-Port = 1
        Cisco-AVPair = "audit-session-id=0a26000300007fac4ed31076"
        NAS-IP-Address = 10.38.0.3
        NAS-Identifier = "MAKWLC5508-1"
        Airespace-Wlan-Id = 4
        Service-Type = Framed-User
        Framed-MTU = 1300
        NAS-Port-Type = Wireless-802.11
        Tunnel-Type:0 = VLAN
        Tunnel-Medium-Type:0 = IEEE-802
        Tunnel-Private-Group-Id:0 = "19"
        EAP-Message = 0x020400061900
        State = 0x0c78f6160e7cefab29789ce03c2fa122
        Message-Authenticator = 0x5546f673ea00a405faa28720e9f6ab76
+- entering group authorize {...}
++[preprocess] returns ok
[auth_log]      expand: /var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d -> /var/log/radius/radacct/10.38.0.3/auth-detail-20111128
[auth_log] /var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /var/log/radius/radacct/10.38.0.3/auth-detail-20111128
[auth_log]      expand: %t -> Mon Nov 28 15:39:13 2011
++[auth_log] returns ok
[suffix] No '@' in User-Name = "uldaptest", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 4 length 6
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
[peap] Received TLS ACK
[peap] ACK handshake fragment handler
[peap] eaptls_verify returned 1
[peap] eaptls_process returned 13
[peap] EAPTLS_HANDLED
++[eap] returns handled
Sending Access-Challenge of id 240 to 10.38.0.3 port 32769
        EAP-Message = 0x0105014a19006361746520417574686f726974798209009f5c ...
        EAP-Message = 0xd6e0fee86621f984bd730d2494704b554e1aa8baad5c4f1c2c ...
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0x0c78f6160f7defab29789ce03c2fa122
Finished request 3.
Going to the next request
Waking up in 4.9 seconds.
Packet 4
rad_recv: Access-Request packet from host 10.38.0.3 port 32769, id=241, length=578
        User-Name = "uldaptest"
        Calling-Station-Id = "d0-23-db-e8-b6-01"
        Called-Station-Id = "e8-ba-70-9c-a3-d0:acubluecoat"
        NAS-Port = 1
        Cisco-AVPair = "audit-session-id=0a26000300007fac4ed31076"
        NAS-IP-Address = 10.38.0.3
        NAS-Identifier = "MAKWLC5508-1"
        Airespace-Wlan-Id = 4
        Service-Type = Framed-User
        Framed-MTU = 1300
        NAS-Port-Type = Wireless-802.11
        Tunnel-Type:0 = VLAN
        Tunnel-Medium-Type:0 = IEEE-802
        Tunnel-Private-Group-Id:0 = "19"
        EAP-Message = 0x020501501980000001461603010106100001020100960b620f ...
        EAP-Message = 0x050369c4597e0b74b7983fe6d4d126932cb6a14da376e61414 ...
        State = 0x0c78f6160f7defab29789ce03c2fa122
        Message-Authenticator = 0xc5cf2ebf2d560e1cc00f06b96305c7b5
+- entering group authorize {...}
++[preprocess] returns ok
[auth_log]      expand: /var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d -> /var/log/radius/radacct/10.38.0.3/auth-detail-20111128
[auth_log] /var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /var/log/radius/radacct/10.38.0.3/auth-detail-20111128
[auth_log]      expand: %t -> Mon Nov 28 15:39:13 2011
++[auth_log] returns ok
[suffix] No '@' in User-Name = "uldaptest", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 5 length 253
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
  TLS Length 326
[peap] Length Included
[peap] eaptls_verify returned 11
[peap] <<< TLS 1.0 Handshake [length 0106], ClientKeyExchange
[peap]     TLS_accept: SSLv3 read client key exchange A
[peap] <<< TLS 1.0 ChangeCipherSpec [length 0001]
[peap] <<< TLS 1.0 Handshake [length 0010], Finished
[peap]     TLS_accept: SSLv3 read finished A
[peap] >>> TLS 1.0 ChangeCipherSpec [length 0001]
[peap]     TLS_accept: SSLv3 write change cipher spec A
[peap] >>> TLS 1.0 Handshake [length 0010], Finished
[peap]     TLS_accept: SSLv3 write finished A
[peap]     TLS_accept: SSLv3 flush data
[peap]     (other): SSL negotiation finished successfully
SSL Connection Established
[peap] eaptls_process returned 13
[peap] EAPTLS_HANDLED
++[eap] returns handled
Sending Access-Challenge of id 241 to 10.38.0.3 port 32769
        EAP-Message = 0x0106004119001403010001011603010030d7894bd4d1fdda80 ...
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0x0c78f616087eefab29789ce03c2fa122
Finished request 4.
Going to the next request
Waking up in 4.8 seconds.
Packet 5
rad_recv: Access-Request packet from host 10.38.0.3 port 32769, id=242, length=246
        User-Name = "uldaptest"
        Calling-Station-Id = "d0-23-db-e8-b6-01"
        Called-Station-Id = "e8-ba-70-9c-a3-d0:acubluecoat"
        NAS-Port = 1
        Cisco-AVPair = "audit-session-id=0a26000300007fac4ed31076"
        NAS-IP-Address = 10.38.0.3
        NAS-Identifier = "MAKWLC5508-1"
        Airespace-Wlan-Id = 4
        Service-Type = Framed-User
        Framed-MTU = 1300
        NAS-Port-Type = Wireless-802.11
        Tunnel-Type:0 = VLAN
        Tunnel-Medium-Type:0 = IEEE-802
        Tunnel-Private-Group-Id:0 = "19"
        EAP-Message = 0x020600061900
        State = 0x0c78f616087eefab29789ce03c2fa122
        Message-Authenticator = 0xe0557ef5bb67ba6b81ab20513d65fd7f
+- entering group authorize {...}
++[preprocess] returns ok
[auth_log]      expand: /var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d -> /var/log/radius/radacct/10.38.0.3/auth-detail-20111128
[auth_log] /var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /var/log/radius/radacct/10.38.0.3/auth-detail-20111128
[auth_log]      expand: %t -> Mon Nov 28 15:39:14 2011
++[auth_log] returns ok
[suffix] No '@' in User-Name = "uldaptest", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 6 length 6
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
[peap] Received TLS ACK
[peap] ACK handshake is finished
[peap] eaptls_verify returned 3
[peap] eaptls_process returned 3
[peap] EAPTLS_SUCCESS
++[eap] returns handled
Sending Access-Challenge of id 242 to 10.38.0.3 port 32769
        EAP-Message = 0x0107002b190017030100209de7fc5e4ae455f946e2ea4e4b18 ...
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0x0c78f616097fefab29789ce03c2fa122
Finished request 5.
Going to the next request
Waking up in 4.8 seconds.
Packet 6
rad_recv: Access-Request packet from host 10.38.0.3 port 32769, id=243, length=283
        User-Name = "uldaptest"
        Calling-Station-Id = "d0-23-db-e8-b6-01"
        Called-Station-Id = "e8-ba-70-9c-a3-d0:acubluecoat"
        NAS-Port = 1
        Cisco-AVPair = "audit-session-id=0a26000300007fac4ed31076"
        NAS-IP-Address = 10.38.0.3
        NAS-Identifier = "MAKWLC5508-1"
        Airespace-Wlan-Id = 4
        Service-Type = Framed-User
        Framed-MTU = 1300
        NAS-Port-Type = Wireless-802.11
        Tunnel-Type:0 = VLAN
        Tunnel-Medium-Type:0 = IEEE-802
        Tunnel-Private-Group-Id:0 = "19"
        EAP-Message = 0x0207002b1900170301002002719aa3fa2024a6c67106b383a3 ...
        State = 0x0c78f616097fefab29789ce03c2fa122
        Message-Authenticator = 0xe782aed7aa6de93a419f5e0d745eae21
+- entering group authorize {...}
++[preprocess] returns ok
[auth_log]      expand: /var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d -> /var/log/radius/radacct/10.38.0.3/auth-detail-20111128
[auth_log] /var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /var/log/radius/radacct/10.38.0.3/auth-detail-20111128
[auth_log]      expand: %t -> Mon Nov 28 15:39:14 2011
++[auth_log] returns ok
[suffix] No '@' in User-Name = "uldaptest", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 7 length 43
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
[peap] eaptls_verify returned 7
[peap] Done initial handshake
[peap] eaptls_process returned 7
[peap] EAPTLS_OK
[peap] Session established.  Decoding tunneled attributes.
[peap] Identity - uldaptest
[peap] Got tunneled request
        EAP-Message = 0x0207000e01756c64617074657374
server  {
  PEAP: Got tunneled identity of uldaptest
  PEAP: Setting default EAP type for tunneled EAP session.
  PEAP: Setting User-Name to uldaptest
Sending tunneled request
        EAP-Message = 0x0207000e01756c64617074657374
        FreeRADIUS-Proxied-To = 127.0.0.1
        User-Name = "uldaptest"
server inner-tunnel {
+- entering group authorize {...}
++[chap] returns noop
++[mschap] returns noop
++[unix] returns notfound
[suffix] No '@' in User-Name = "uldaptest", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
++[control] returns noop
[eap] EAP packet type response id 7 length 14
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
[files] users: Matched entry DEFAULT at line 149
++[files] returns ok
[ldap] performing user authorization for uldaptest
[ldap] WARNING: Deprecated conditional expansion ":-".  See "man unlang" for details
[ldap]  expand: (&(sAMAccountName=%{Stripped-User-Name:-%{User-Name}})) -> (&(sAMAccountName=uldaptest))
[ldap]  expand: dc=acu,dc=edu,dc=au -> dc=acu,dc=edu,dc=au
rlm_ldap: ldap_get_conn: Checking Id: 0
rlm_ldap: ldap_get_conn: Got Id: 0
rlm_ldap: performing search in dc=acu,dc=edu,dc=au, with filter (&(sAMAccountName=uldaptest))
[ldap] looking for check items in directory...
[ldap] looking for reply items in directory...
WARNING: No "known good" password was found in LDAP.  Are you sure that the user is configured correctly?
[ldap] user uldaptest authorized to use remote access
rlm_ldap: ldap_release_conn: Release Id: 0
++[ldap] returns ok
++[expiration] returns noop
++[logintime] returns noop
++[pap] returns noop
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] EAP Identity
[eap] processing type mschapv2
rlm_eap_mschapv2: Issuing Challenge
++[eap] returns handled
} # server inner-tunnel
[peap] Got tunneled reply code 11
        EAP-Message = 0x010800231a0108001e10be32d46bf3c68076eb2d8d743dadfb ...
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0xc7715fc0c779457e374c07f4d937c2f5
[peap] Got tunneled reply RADIUS code 11
        EAP-Message = 0x010800231a0108001e10be32d46bf3c68076eb2d8d743dadfb ...
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0xc7715fc0c779457e374c07f4d937c2f5
[peap] Got tunneled Access-Challenge
++[eap] returns handled
Sending Access-Challenge of id 243 to 10.38.0.3 port 32769
        EAP-Message = 0x0108004b190017030100406a652f532ea4efc0dfd89cd91412 ...
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0x0c78f6160a70efab29789ce03c2fa122
Finished request 6.
Going to the next request
Waking up in 4.8 seconds.
Packet 7
rad_recv: Access-Request packet from host 10.38.0.3 port 32769, id=244, length=347
        User-Name = "uldaptest"
        Calling-Station-Id = "d0-23-db-e8-b6-01"
        Called-Station-Id = "e8-ba-70-9c-a3-d0:acubluecoat"
        NAS-Port = 1
        Cisco-AVPair = "audit-session-id=0a26000300007fac4ed31076"
        NAS-IP-Address = 10.38.0.3
        NAS-Identifier = "MAKWLC5508-1"
        Airespace-Wlan-Id = 4
        Service-Type = Framed-User
        Framed-MTU = 1300
        NAS-Port-Type = Wireless-802.11
        Tunnel-Type:0 = VLAN
        Tunnel-Medium-Type:0 = IEEE-802
        Tunnel-Private-Group-Id:0 = "19"
        EAP-Message = 0x0208006b19001703010060e1bcc6f75e33d9687c4b70216560 ...
        State = 0x0c78f6160a70efab29789ce03c2fa122
        Message-Authenticator = 0xca4936007fc87868f73c635317e7c8f4
+- entering group authorize {...}
++[preprocess] returns ok
[auth_log]      expand: /var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d -> /var/log/radius/radacct/10.38.0.3/auth-detail-20111128
[auth_log] /var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /var/log/radius/radacct/10.38.0.3/auth-detail-20111128
[auth_log]      expand: %t -> Mon Nov 28 15:39:14 2011
++[auth_log] returns ok
[suffix] No '@' in User-Name = "uldaptest", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 8 length 107
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
[peap] eaptls_verify returned 7
[peap] Done initial handshake
[peap] eaptls_process returned 7
[peap] EAPTLS_OK
[peap] Session established.  Decoding tunneled attributes.
[peap] EAP type mschapv2
[peap] Got tunneled request
        EAP-Message = 0x020800441a0208003f318c683ff9a452093504a6cd5448fd55 ...
server  {
  PEAP: Setting User-Name to uldaptest
Sending tunneled request
        EAP-Message = 0x020800441a0208003f318c683ff9a452093504a6cd5448fd55 ...
        FreeRADIUS-Proxied-To = 127.0.0.1
        User-Name = "uldaptest"
        State = 0xc7715fc0c779457e374c07f4d937c2f5
server inner-tunnel {
+- entering group authorize {...}
++[chap] returns noop
++[mschap] returns noop
++[unix] returns notfound
[suffix] No '@' in User-Name = "uldaptest", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
++[control] returns noop
[eap] EAP packet type response id 8 length 68
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
[files] users: Matched entry DEFAULT at line 149
++[files] returns ok
[ldap] performing user authorization for uldaptest
[ldap] WARNING: Deprecated conditional expansion ":-".  See "man unlang" for details
[ldap]  expand: (&(sAMAccountName=%{Stripped-User-Name:-%{User-Name}})) -> (&(sAMAccountName=uldaptest))
[ldap]  expand: dc=acu,dc=edu,dc=au -> dc=acu,dc=edu,dc=au
rlm_ldap: ldap_get_conn: Checking Id: 0
rlm_ldap: ldap_get_conn: Got Id: 0
rlm_ldap: performing search in dc=acu,dc=edu,dc=au, with filter (&(sAMAccountName=uldaptest))
[ldap] looking for check items in directory...
[ldap] looking for reply items in directory...
WARNING: No "known good" password was found in LDAP.  Are you sure that the user is configured correctly?
[ldap] user uldaptest authorized to use remote access
rlm_ldap: ldap_release_conn: Release Id: 0
++[ldap] returns ok
++[expiration] returns noop
++[logintime] returns noop
++[pap] returns noop
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/mschapv2
[eap] processing type mschapv2
[mschapv2]   WARNING: Unknown value specified for Auth-Type.  Cannot perform requested action.
[eap] Freeing handler
++[eap] returns reject
Failed to authenticate the user.
        expand: Host %n -> Host ?.?.?.?
Login incorrect: [uldaptest] (from client acubluecoat port 0 via TLS tunnel) Host ?.?.?.?
} # server inner-tunnel
[peap] Got tunneled reply code 3
        EAP-Message = 0x04080004
        Message-Authenticator = 0x00000000000000000000000000000000
[peap] Got tunneled reply RADIUS code 3
        EAP-Message = 0x04080004
        Message-Authenticator = 0x00000000000000000000000000000000
[peap] Tunneled authentication was rejected.
[peap] FAILURE
++[eap] returns handled
Sending Access-Challenge of id 244 to 10.38.0.3 port 32769
        EAP-Message = 0x0109002b1900170301002077a23a436acd15a5f46f48e1ad3f ...
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0x0c78f6160b71efab29789ce03c2fa122
Finished request 7.
Going to the next request
Waking up in 4.8 seconds.
Packet 8
rad_recv: Access-Request packet from host 10.38.0.3 port 32769, id=245, length=283
        User-Name = "uldaptest"
        Calling-Station-Id = "d0-23-db-e8-b6-01"
        Called-Station-Id = "e8-ba-70-9c-a3-d0:acubluecoat"
        NAS-Port = 1
        Cisco-AVPair = "audit-session-id=0a26000300007fac4ed31076"
        NAS-IP-Address = 10.38.0.3
        NAS-Identifier = "MAKWLC5508-1"
        Airespace-Wlan-Id = 4
        Service-Type = Framed-User
        Framed-MTU = 1300
        NAS-Port-Type = Wireless-802.11
        Tunnel-Type:0 = VLAN
        Tunnel-Medium-Type:0 = IEEE-802
        Tunnel-Private-Group-Id:0 = "19"
        EAP-Message = 0x0209002b190017030100203e380273aaacc98737e599c8b886 ...
        State = 0x0c78f6160b71efab29789ce03c2fa122
        Message-Authenticator = 0x49fde68a41b84dab6fd1437fd478289c
+- entering group authorize {...}
++[preprocess] returns ok
[auth_log]      expand: /var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d -> /var/log/radius/radacct/10.38.0.3/auth-detail-20111128
[auth_log] /var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /var/log/radius/radacct/10.38.0.3/auth-detail-20111128
[auth_log]      expand: %t -> Mon Nov 28 15:39:14 2011
++[auth_log] returns ok
[suffix] No '@' in User-Name = "uldaptest", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 9 length 43
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
[peap] eaptls_verify returned 7
[peap] Done initial handshake
[peap] eaptls_process returned 7
[peap] EAPTLS_OK
[peap] Session established.  Decoding tunneled attributes.
[peap] Received EAP-TLV response.
[peap]  Had sent TLV failure.  User was rejected earlier in this session.
[eap] Handler failed in EAP/peap
[eap] Failed in EAP select
++[eap] returns invalid
Failed to authenticate the user.
        expand: Host %n -> Host 10.38.0.3
Login incorrect: [uldaptest] (from client acubluecoat port 1 cli d0-23-db-e8-b6-01) Host 10.38.0.3
Using Post-Auth-Type Reject
+- entering group REJECT {...}
[attr_filter.access_reject]     expand: %{User-Name} -> uldaptest
 attr_filter: Matched entry DEFAULT at line 11
++[attr_filter.access_reject] returns updated
Delaying reject of request 8 for 3 seconds
Going to the next request
Waking up in 0.9 seconds.
Waking up in 1.9 seconds.
Packet 9
rad_recv: Access-Request packet from host 10.38.0.3 port 32769, id=245, length=283
Waiting to send Access-Reject to client acubluecoat port 32769 - ID: 245
Waking up in 0.9 seconds.
Sending delayed reject for request 8
Sending Access-Reject of id 245 to 10.38.0.3 port 32769
        EAP-Message = 0x04090004
        Message-Authenticator = 0x00000000000000000000000000000000
Waking up in 1.8 seconds.
Cleaning up request 0 ID 237 with timestamp +6
Cleaning up request 1 ID 238 with timestamp +6
Cleaning up request 2 ID 239 with timestamp +6
Cleaning up request 3 ID 240 with timestamp +6
Cleaning up request 4 ID 241 with timestamp +6
Cleaning up request 5 ID 242 with timestamp +7
Cleaning up request 6 ID 243 with timestamp +7
Cleaning up request 7 ID 244 with timestamp +7
Waking up in 3.0 seconds.
Cleaning up request 8 ID 245 with timestamp +7
Ready to process requests.

Sent from my iPad

Free radius authentication with active directory using leap module

Vikash Gounder