Hello, I have a problem with my pools in freeradius. The problems is that it is not releasing IPs from the pools. At least, not all of them, so after a while my users can't connect because the pool is full. I check that it is not releasing IPs because I get (I have replaced usernames with XXXX): root@vulpes21:/usr/share/doc/freeradius# radwho | grep 155.54.194 XXXXXXXX XXXXXXXXX PPP >999 Wed 10:28 155.54.213.20 155.54.194.128 XXXXXXXX XXXXXXXXX PPP >999 Wed 10:36 155.54.213.20 155.54.194.51 XXXXXXXX XXXXXXXXX PPP >999 Wed 10:42 155.54.213.20 155.54.194.8 XXXXXXXX XXXXXXXXX PPP >999 Wed 12:33 155.54.213.20 155.54.194.115 XXXXXXXX XXXXXXXXX PPP >999 Wed 12:37 155.54.213.20 155.54.194.101 XXXXXXXX XXXXXXXXX PPP >999 Wed 12:40 155.54.213.20 155.54.194.62 XXXXXXXX XXXXXXXXX PPP >999 Wed 13:06 155.54.213.20 155.54.194.92 XXXXXXXX XXXXXXXXX PPP >999 Wed 13:11 155.54.213.20 155.54.194.48 XXXXXXXX XXXXXXXXX PPP >999 Wed 13:24 155.54.213.20 155.54.194.78 XXXXXXXX XXXXXXXXX PPP >999 Wed 13:27 155.54.213.20 155.54.194.112 XXXXXXXX XXXXXXXXX PPP >999 Wed 13:28 155.54.213.20 155.54.194.59 XXXXXXXX XXXXXXXXX PPP >999 Wed 13:29 155.54.213.20 155.54.194.134 but rlm_ippol_tool shows a lot of IP addresses in use: root@vulpes21:/etc/freeradius# rlm_ippool_tool -a pool_vpn.ippool pool_vpn.ipindex | wc -l 122 In my configuration I have: authorize { vpn_log vpn_syslog suffix files_vpn pap } authenticate { Auth-Type PAP { pap } Auth-Type LDAP { ldap-email } } preacct { suffix files_vpn } accounting { vpn_log unix pool_vpn pool_vpn_alu pool_vpn_ryt radutmp vpn_acc_syslog sql_log_um } session { } post-auth { pool_vpn pool_vpn_alu pool_vpn_ryt vpn_log vpn_syslog } pre-proxy { } post-proxy { } Any idea? Ah... I'm running 2.1.8 from ubuntu 10.04. -- Angel L. Mateo Martínez Sección de Telemática Área de Tecnologías de la Información _o) y las Comunicaciones Aplicadas (ATICA) / \\ http://www.um.es/atica _(___V Tfo: 868887590 Fax: 868888337