I am using a standard settings of eap.conf when I change eap.conf to: # default_eap_type = md5 default_eap_type = peap I have similar communicate Ready to process requests. rad_recv: Access-Request packet from host 192.168.5.206 port 1812, id=242, length=147 NAS-IP-Address = 192.168.5.206 NAS-Port = 50046 NAS-Port-Type = Ethernet User-Name = "user_certificate" Called-Station-Id = "00-0C-30-81-9B-EE" Calling-Station-Id = "00-0A-E4-13-1A-02" Service-Type = Framed-User Framed-MTU = 1500 EAP-Message = 0x0200001501757365725f6365727469666963617465 Message-Authenticator = 0x4fea88a60594825de9229268206fb02d +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "user_certificate", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 0 length 21 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[unix] returns notfound ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] EAP Identity [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 242 to 192.168.5.206 port 1812 EAP-Message = 0x010100061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x54cef72d54cfee66f11829ca8f9f95d7 Finished request 0. Going to the next request Waking up in 4.9 seconds. Cleaning up request 0 ID 242 with timestamp +37 Ready to process requests. On Wed, May 20, 2009 at 3:51 PM, Ivan Kalik <tnt@kalik.net> wrote:
[eap] processing type md5 rlm_eap_md5: Issuing Challenge
Hm, you are saying you want to do EAP-TLS but your server reports that it has got EAP-MD5 request. Check connection settings on Windows machine.
Ivan Kalik Kalik Informatika ISP