ERROR: FAILED: No NT-Password. Cannot perform authentication

19 Dec 2023

      Hi everyone,

I have Aruba APs, FreeRADIUS, and 389 directory server for LDAP. From what I can gather from the debug output and my own research, I can see that the client (Aruba AP) is trying to use EAP-MSCHAPv2 for authentication, which is not compatible with the SSHA2-512 stored passwords in our LDAP server. The solution I have seen for this is to either change the password storage format, or change the authentication method, preferably the later. Aruba APs are compatible with a number of eap authentication methods that should work with SSHA2-512 passwords, but there is no way to define this on the controller, so I think this has to be done on the radius server. 

Let me know if I am on the right track. If this assumption is correct, how do I manually define the authentication method on freeradius? Or if I am totally wrong and misguided, a point in the right direction will be greatly appreciated.

See debug output below.

Thank you.

root@paw-mgmt-svr04:/home/pawnetadmin# freeradius -X 2>&1 | tee debugfile
FreeRADIUS Version 3.0.26
Copyright (C) 1999-2021 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/freeradius/3.0/dictionary
including configuration file /etc/freeradius/3.0/radiusd.conf
including configuration file /etc/freeradius/3.0/proxy.conf
including configuration file /etc/freeradius/3.0/clients.conf
including files in directory /etc/freeradius/3.0/mods-enabled/
including configuration file /etc/freeradius/3.0/mods-enabled/files
including configuration file /etc/freeradius/3.0/mods-enabled/eap
including configuration file /etc/freeradius/3.0/mods-enabled/always
including configuration file /etc/freeradius/3.0/mods-enabled/expiration
including configuration file /etc/freeradius/3.0/mods-enabled/soh
including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth
including configuration file /etc/freeradius/3.0/mods-enabled/preprocess
including configuration file /etc/freeradius/3.0/mods-enabled/passwd
including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter
including configuration file /etc/freeradius/3.0/mods-enabled/realm
including configuration file /etc/freeradius/3.0/mods-enabled/exec
including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap
including configuration file /etc/freeradius/3.0/mods-enabled/unix
including configuration file /etc/freeradius/3.0/mods-enabled/detail.log
including configuration file /etc/freeradius/3.0/mods-enabled/linelog
including configuration file /etc/freeradius/3.0/mods-enabled/echo
including configuration file /etc/freeradius/3.0/mods-enabled/chap
including configuration file /etc/freeradius/3.0/mods-enabled/replicate
including configuration file /etc/freeradius/3.0/mods-enabled/mschap
including configuration file /etc/freeradius/3.0/mods-enabled/utf8
including configuration file /etc/freeradius/3.0/mods-enabled/expr
including configuration file /etc/freeradius/3.0/mods-enabled/logintime
including configuration file /etc/freeradius/3.0/mods-enabled/pap
including configuration file /etc/freeradius/3.0/mods-enabled/digest
including configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clients
including configuration file /etc/freeradius/3.0/mods-enabled/ldap
including configuration file /etc/freeradius/3.0/mods-enabled/unpack
including configuration file /etc/freeradius/3.0/mods-enabled/radutmp
including configuration file /etc/freeradius/3.0/mods-enabled/detail
including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp
including files in directory /etc/freeradius/3.0/policy.d/
including configuration file /etc/freeradius/3.0/policy.d/eap
including configuration file /etc/freeradius/3.0/policy.d/filter
including configuration file /etc/freeradius/3.0/policy.d/abfab-tr
including configuration file /etc/freeradius/3.0/policy.d/canonicalization
including configuration file /etc/freeradius/3.0/policy.d/moonshot-targeted-ids
including configuration file /etc/freeradius/3.0/policy.d/cui
including configuration file /etc/freeradius/3.0/policy.d/operator-name
including configuration file /etc/freeradius/3.0/policy.d/accounting
including configuration file /etc/freeradius/3.0/policy.d/debug
including configuration file /etc/freeradius/3.0/policy.d/dhcp
including configuration file /etc/freeradius/3.0/policy.d/control
including configuration file /etc/freeradius/3.0/policy.d/rfc7542
including files in directory /etc/freeradius/3.0/sites-enabled/
including configuration file /etc/freeradius/3.0/sites-enabled/inner-tunnel
including configuration file /etc/freeradius/3.0/sites-enabled/default
main {
 security {
        user = "freerad"
        group = "freerad"
        allow_core_dumps = no
 }
        name = "freeradius"
        prefix = "/usr"
        localstatedir = "/var"
        logdir = "/var/log/freeradius"
        run_dir = "/var/run/freeradius"
}
main {
        name = "freeradius"
        prefix = "/usr"
        localstatedir = "/var"
        sbindir = "/usr/sbin"
        logdir = "/var/log/freeradius"
        run_dir = "/var/run/freeradius"
        libdir = "/usr/lib/freeradius"
        radacctdir = "/var/log/freeradius/radacct"
        hostname_lookups = no
        max_request_time = 30
        cleanup_delay = 5
        max_requests = 16384
        postauth_client_lost = no
        pidfile = "/var/run/freeradius/freeradius.pid"
        checkrad = "/usr/sbin/checkrad"
        debug_level = 0
        proxy_requests = yes
 log {
        stripped_names = no
        auth = no
        auth_badpass = no
        auth_goodpass = no
        colourise = yes
        msg_denied = "You are already logged in - access denied"
 }
 resources {
 }
 security {
        max_attributes = 200
        reject_delay = 1.000000
        status_server = yes
 }
}
radiusd: #### Loading Realms and Home Servers ####
 proxy server {
        retry_delay = 5
        retry_count = 3
        default_fallback = no
        dead_time = 120
        wake_all_if_all_dead = no
 }
 home_server localhost {
        ipaddr = 127.0.0.1
        port = 1812
        type = "auth"
        secret = <<< secret >>>
        response_window = 20.000000
        response_timeouts = 1
        max_outstanding = 65536
        zombie_period = 40
        status_check = "status-server"
        ping_interval = 30
        check_interval = 30
        check_timeout = 4
        num_answers_to_alive = 3
        revive_interval = 120
  limit {
        max_connections = 16
        max_requests = 0
        lifetime = 0
        idle_timeout = 0
  }
  coa {
        irt = 2
        mrt = 16
        mrc = 5
        mrd = 30
  }
 }
 home_server_pool my_auth_failover {
        type = fail-over
        home_server = localhost
 }
 realm example.com {
        auth_pool = my_auth_failover
 }
 realm LOCAL {
 }
radiusd: #### Loading Clients ####
 client 202.8.32.153 {
        ipaddr = 202.8.32.153
        require_message_authenticator = no
        secret = <<< secret >>>
        shortname = "paw-mgmt-ap01"
  limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
  }
 }
 client localhost {
        ipaddr = 127.0.0.1
        require_message_authenticator = no
        secret = <<< secret >>>
        nas_type = "other"
        proto = "*"
  limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
  }
 }
 client localhost_ipv6 {
        ipv6addr = ::1
        require_message_authenticator = no
        secret = <<< secret >>>
  limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
  }
 }
Debugger not attached
systemd watchdog is disabled
 # Creating Auth-Type = mschap
 # Creating Auth-Type = eap
 # Creating Auth-Type = PAP
 # Creating Auth-Type = CHAP
 # Creating Auth-Type = MS-CHAP
 # Creating Auth-Type = digest
 # Creating Autz-Type = New-TLS-Connection
radiusd: #### Instantiating modules ####
 modules {
  # Loaded module rlm_files
  # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files
  files {
        filename = "/etc/freeradius/3.0/mods-config/files/authorize"
        acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting"
        preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy"
  }
  # Loaded module rlm_eap
  # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap
  eap {
        default_eap_type = "md5"
        timer_expire = 60
        ignore_unknown_eap_types = no
        cisco_accounting_username_bug = no
        max_sessions = 16384
  }
  # Loaded module rlm_always
  # Loading module "reject" from file /etc/freeradius/3.0/mods-enabled/always
  always reject {
        rcode = "reject"
        simulcount = 0
        mpp = no
  }
  # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always
  always fail {
        rcode = "fail"
        simulcount = 0
        mpp = no
  }
  # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always
  always ok {
        rcode = "ok"
        simulcount = 0
        mpp = no
  }
  # Loading module "handled" from file /etc/freeradius/3.0/mods-enabled/always
  always handled {
        rcode = "handled"
        simulcount = 0
        mpp = no
  }
  # Loading module "invalid" from file /etc/freeradius/3.0/mods-enabled/always
  always invalid {
        rcode = "invalid"
        simulcount = 0
        mpp = no
  }
  # Loading module "userlock" from file /etc/freeradius/3.0/mods-enabled/always
  always userlock {
        rcode = "userlock"
        simulcount = 0
        mpp = no
  }
  # Loading module "notfound" from file /etc/freeradius/3.0/mods-enabled/always
  always notfound {
        rcode = "notfound"
        simulcount = 0
        mpp = no
  }
  # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always
  always noop {
        rcode = "noop"
        simulcount = 0
        mpp = no
  }
  # Loading module "updated" from file /etc/freeradius/3.0/mods-enabled/always
  always updated {
        rcode = "updated"
        simulcount = 0
        mpp = no
  }
  # Loaded module rlm_expiration
  # Loading module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration
  # Loaded module rlm_soh
  # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh
  soh {
        dhcp = yes
  }
  # Loaded module rlm_exec
  # Loading module "ntlm_auth" from file /etc/freeradius/3.0/mods-enabled/ntlm_auth
  exec ntlm_auth {
        wait = yes
        program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}"
        shell_escape = yes
  }
  # Loaded module rlm_preprocess
  # Loading module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess
  preprocess {
        huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups"
        hints = "/etc/freeradius/3.0/mods-config/preprocess/hints"
        with_ascend_hack = no
        ascend_channels_per_line = 23
        with_ntdomain_hack = no
        with_specialix_jetstream_hack = no
        with_cisco_vsa_hack = no
        with_alvarion_vsa_hack = no
  }
  # Loaded module rlm_passwd
  # Loading module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd
  passwd etc_passwd {
        filename = "/etc/passwd"
        format = "*User-Name:Crypt-Password:"
        delimiter = ":"
        ignore_nislike = no
        ignore_empty = yes
        allow_multiple_keys = no
        hash_size = 100
  }
  # Loaded module rlm_attr_filter
  # Loading module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.post-proxy {
        filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy"
        key = "%{Realm}"
        relaxed = no
  }
  # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.pre-proxy {
        filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy"
        key = "%{Realm}"
        relaxed = no
  }
  # Loading module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.access_reject {
        filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject"
        key = "%{User-Name}"
        relaxed = no
  }
  # Loading module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.access_challenge {
        filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge"
        key = "%{User-Name}"
        relaxed = no
  }
  # Loading module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.accounting_response {
        filename = "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response"
        key = "%{User-Name}"
        relaxed = no
  }
  # Loading module "attr_filter.coa" from file /etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.coa {
        filename = "/etc/freeradius/3.0/mods-config/attr_filter/coa"
        key = "%{User-Name}"
        relaxed = no
  }
  # Loaded module rlm_realm
  # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm
  realm IPASS {
        format = "prefix"
        delimiter = "/"
        ignore_default = no
        ignore_null = no
  }
  # Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm
  realm suffix {
        format = "suffix"
        delimiter = "@"
        ignore_default = no
        ignore_null = no
  }
  # Loading module "bangpath" from file /etc/freeradius/3.0/mods-enabled/realm
  realm bangpath {
        format = "prefix"
        delimiter = "!"
        ignore_default = no
        ignore_null = no
  }
  # Loading module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm
  realm realmpercent {
        format = "suffix"
        delimiter = "%"
        ignore_default = no
        ignore_null = no
  }
  # Loading module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm
  realm ntdomain {
        format = "prefix"
        delimiter = "\\"
        ignore_default = no
        ignore_null = no
  }
  # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec
  exec {
        wait = no
        input_pairs = "request"
        shell_escape = yes
        timeout = 10
  }
  # Loaded module rlm_cache
  # Loading module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap
  cache cache_eap {
        driver = "rlm_cache_rbtree"
        key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
        ttl = 15
        max_entries = 0
        epoch = 0
        add_stats = no
  }
  # Loaded module rlm_unix
  # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix
  unix {
        radwtmp = "/var/log/freeradius/radwtmp"
  }
Creating attribute Unix-Group
  # Loaded module rlm_detail
  # Loading module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
  detail auth_log {
        filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loading module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
  detail reply_log {
        filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loading module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
  detail pre_proxy_log {
        filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loading module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
  detail post_proxy_log {
        filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loaded module rlm_linelog
  # Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog
  linelog {
        filename = "/var/log/freeradius/linelog"
        escape_filenames = no
        syslog_severity = "info"
        permissions = 384
        format = "This is a log message for %{User-Name}"
        reference = "messages.%{%{reply:Packet-Type}:-default}"
  }
  # Loading module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog
  linelog log_accounting {
        filename = "/var/log/freeradius/linelog-accounting"
        escape_filenames = no
        syslog_severity = "info"
        permissions = 384
        format = ""
        reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
  }
  # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo
  exec echo {
        wait = yes
        program = "/bin/echo %{User-Name}"
        input_pairs = "request"
        output_pairs = "reply"
        shell_escape = yes
  }
  # Loaded module rlm_chap
  # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap
  # Loaded module rlm_replicate
  # Loading module "replicate" from file /etc/freeradius/3.0/mods-enabled/replicate
  # Loaded module rlm_mschap
  # Loading module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap
  mschap {
        use_mppe = yes
        require_encryption = no
        require_strong = no
        with_ntdomain_hack = yes
   passchange {
   }
        allow_retry = yes
        winbind_retry_with_normalised_username = no
  }
  # Loaded module rlm_utf8
  # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8
  # Loaded module rlm_expr
  # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr
  expr {
        safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
  }
  # Loaded module rlm_logintime
  # Loading module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime
  logintime {
        minimum_timeout = 60
  }
  # Loaded module rlm_pap
  # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap
  pap {
        normalise = yes
  }
  # Loaded module rlm_digest
  # Loading module "digest" from file /etc/freeradius/3.0/mods-enabled/digest
  # Loaded module rlm_dynamic_clients
  # Loading module "dynamic_clients" from file /etc/freeradius/3.0/mods-enabled/dynamic_clients
  # Loaded module rlm_ldap
  # Loading module "ldap" from file /etc/freeradius/3.0/mods-enabled/ldap
  ldap {
        server = "ldap://ldap-pool.pawsey.org.au"
        identity = "uid=cinnis,ou=people,dc=pawsey,dc=org,dc=au"
        password = <<< secret >>>
   sasl {
   }
        user_dn = "LDAP-UserDn"
   user {
        scope = "sub"
        access_positive = yes
    sasl {
    }
   }
   group {
        filter = "(objectClass=posixGroup)"
        scope = "sub"
        name_attribute = "cn"
        membership_attribute = "memberOf"
        cacheable_name = no
        cacheable_dn = no
        allow_dangling_group_ref = no
   }
   client {
        filter = "(objectClass=radiusClient)"
        scope = "sub"
        base_dn = "dc=pawsey,dc=org,dc=au"
   }
   profile {
   }
   options {
        ldap_debug = 40
        chase_referrals = yes
        rebind = yes
        net_timeout = 1
        res_timeout = 10
        srv_timelimit = 3
        idle = 60
        probes = 3
        interval = 3
   }
   tls {
        start_tls = no
   }
  }
Creating attribute LDAP-Group
  # Loaded module rlm_unpack
  # Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack
  # Loaded module rlm_radutmp
  # Loading module "radutmp" from file /etc/freeradius/3.0/mods-enabled/radutmp
  radutmp {
        filename = "/var/log/freeradius/radutmp"
        username = "%{User-Name}"
        case_sensitive = yes
        check_with_nas = yes
        permissions = 384
        caller_id = yes
  }
  # Loading module "detail" from file /etc/freeradius/3.0/mods-enabled/detail
  detail {
        filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loading module "sradutmp" from file /etc/freeradius/3.0/mods-enabled/sradutmp
  radutmp sradutmp {
        filename = "/var/log/freeradius/sradutmp"
        username = "%{User-Name}"
        case_sensitive = yes
        check_with_nas = yes
        permissions = 420
        caller_id = no
  }
  instantiate {
  }
  # Instantiating module "files" from file /etc/freeradius/3.0/mods-enabled/files
reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize
reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting
reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy
  # Instantiating module "eap" from file /etc/freeradius/3.0/mods-enabled/eap
   # Linked to sub-module rlm_eap_md5
   # Linked to sub-module rlm_eap_gtc
   gtc {
        challenge = "Password: "
        auth_type = "PAP"
   }
   # Linked to sub-module rlm_eap_tls
   tls {
        tls = "tls-common"
   }
   tls-config tls-common {
        verify_depth = 0
        ca_path = "/etc/freeradius/3.0/certs"
        pem_file_type = yes
        private_key_file = "/etc/ssl/private/ssl-cert-snakeoil.key"
        certificate_file = "/etc/ssl/certs/ssl-cert-snakeoil.pem"
        ca_file = "/etc/ssl/certs/ca-certificates.crt"
        private_key_password = <<< secret >>>
        fragment_size = 1024
        include_length = yes
        auto_chain = yes
        check_crl = no
        check_all_crl = no
        ca_path_reload_interval = 0
        cipher_list = "DEFAULT"
        cipher_server_preference = no
        reject_unknown_intermediate_ca = no
        ecdh_curve = ""
        tls_max_version = "1.2"
        tls_min_version = "1.2"
    cache {
        enable = no
        lifetime = 24
        max_entries = 255
    }
    verify {
        skip_if_ocsp_ok = no
    }
    ocsp {
        enable = no
        override_cert_url = yes
        url = "http://127.0.0.1/ocsp/"
        use_nonce = yes
        timeout = 0
        softfail = no
    }
   }
   # Linked to sub-module rlm_eap_ttls
   ttls {
        tls = "tls-common"
        default_eap_type = "md5"
        copy_request_to_tunnel = no
        use_tunneled_reply = no
        virtual_server = "inner-tunnel"
        include_length = yes
        require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_peap
   peap {
        tls = "tls-common"
        default_eap_type = "mschapv2"
        copy_request_to_tunnel = no
        use_tunneled_reply = no
        proxy_tunneled_request_as_eap = yes
        virtual_server = "inner-tunnel"
        soh = no
        require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_mschapv2
   mschapv2 {
        with_ntdomain_hack = no
        send_error = no
   }
  # Instantiating module "reject" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "fail" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "ok" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "handled" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "invalid" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "userlock" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "notfound" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "noop" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "updated" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration
  # Instantiating module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess
reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups
reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints
  # Instantiating module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
  # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy
  # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy
  # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_reject
  # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_challenge
  # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/accounting_response
  # Instantiating module "attr_filter.coa" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/coa
  # Instantiating module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "bangpath" from file /etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap
rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked
  # Instantiating module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output
  # Instantiating module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
  # Instantiating module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
  # Instantiating module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
  # Instantiating module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog
  # Instantiating module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog
  # Instantiating module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap
rlm_mschap (mschap): using internal authentication
  # Instantiating module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime
  # Instantiating module "pap" from file /etc/freeradius/3.0/mods-enabled/pap
  # Instantiating module "ldap" from file /etc/freeradius/3.0/mods-enabled/ldap
rlm_ldap: libldap vendor: OpenLDAP, version: 20516
   accounting {
        reference = "%{tolower:type.%{Acct-Status-Type}}"
   }
   post-auth {
        reference = "."
   }
rlm_ldap (ldap): Initialising connection pool
   pool {
        start = 5
        min = 3
        max = 32
        spare = 10
        uses = 0
        lifetime = 0
        cleanup_interval = 30
        idle_timeout = 60
        retry_delay = 30
        spread = no
   }
rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots used
rlm_ldap (ldap): Connecting to ldap://ldap-pool.pawsey.org.au:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots used
rlm_ldap (ldap): Connecting to ldap://ldap-pool.pawsey.org.au:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots used
rlm_ldap (ldap): Connecting to ldap://ldap-pool.pawsey.org.au:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots used
rlm_ldap (ldap): Connecting to ldap://ldap-pool.pawsey.org.au:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots used
rlm_ldap (ldap): Connecting to ldap://ldap-pool.pawsey.org.au:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
  # Instantiating module "detail" from file /etc/freeradius/3.0/mods-enabled/detail
 } # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/freeradius/3.0/radiusd.conf
} # server
server inner-tunnel { # from file /etc/freeradius/3.0/sites-enabled/inner-tunnel
 # Loading authenticate {...}
Compiling Auth-Type PAP for attr Auth-Type
Compiling Auth-Type CHAP for attr Auth-Type
Compiling Auth-Type MS-CHAP for attr Auth-Type
 # Loading authorize {...}
Ignoring "sql" (see raddb/mods-available/README.rst)
 # Loading session {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
 # Skipping contents of 'if' as it is always 'false' -- /etc/freeradius/3.0/sites-enabled/inner-tunnel:336
Compiling Post-Auth-Type REJECT for attr Post-Auth-Type
} # server inner-tunnel
server default { # from file /etc/freeradius/3.0/sites-enabled/default
 # Loading authenticate {...}
Compiling Auth-Type PAP for attr Auth-Type
Compiling Auth-Type CHAP for attr Auth-Type
Compiling Auth-Type MS-CHAP for attr Auth-Type
 # Loading authorize {...}
Compiling Autz-Type New-TLS-Connection for attr Autz-Type
 # Loading preacct {...}
 # Loading accounting {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
Compiling Post-Auth-Type REJECT for attr Post-Auth-Type
Compiling Post-Auth-Type Challenge for attr Post-Auth-Type
Compiling Post-Auth-Type Client-Lost for attr Post-Auth-Type
} # server default
radiusd: #### Opening IP addresses and Ports ####
listen {
        type = "auth"
        ipaddr = 127.0.0.1
        port = 18120
}
listen {
        type = "auth"
        ipaddr = *
        port = 0
   limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
   }
}
listen {
        type = "acct"
        ipaddr = *
        port = 0
   limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
   }
}
listen {
        type = "auth"
        ipv6addr = ::
        port = 0
   limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
   }
}
listen {
        type = "acct"
        ipv6addr = ::
        port = 0
   limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
   }
}
Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
Listening on auth address * port 1812 bound to server default
Listening on acct address * port 1813 bound to server default
Listening on auth address :: port 1812 bound to server default
Listening on acct address :: port 1813 bound to server default
Listening on proxy address * port 57048
Listening on proxy address :: port 47947
Ready to process requests
(0) Received Access-Request Id 31 from 202.8.32.153:64998 to 146.118.55.22:1812 length 252
(0)   User-Name = "cinnis"
(0)   NAS-IP-Address = 202.8.32.153
(0)   NAS-Port = 0
(0)   NAS-Identifier = "202.8.32.153"
(0)   NAS-Port-Type = Wireless-802.11
(0)   Calling-Station-Id = "aef623dbdd7d"
(0)   Called-Station-Id = "b837b2cc82c7"
(0)   Service-Type = Framed-User
(0)   Framed-MTU = 1100
(0)   EAP-Message = 0x0222000b0163696e6e6973
(0)   Aruba-Essid-Name = "pawsey-aruba01"
(0)   Aruba-Location-Id = "paw-mgmt-ap01"
(0)   Aruba-AP-Group = "Pawsey"
(0)   Aruba-AP-MAC-Address = "b837b2cc82c7"
(0)   Aruba-Device-MAC-Address = "aef623dbdd7d"
(0)   WLAN-Pairwise-Cipher = 1027081
(0)   WLAN-Group-Cipher = 1027081
(0)   WLAN-Group-Mgmt-Cipher = 1027084
(0)   WLAN-AKM-Suite = 1027084
(0)   Message-Authenticator = 0xbf5cfcc1d9a4b65fc38841eba1bc5a53
(0) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(0)   authorize {
(0)     policy filter_username {
(0)       if (&User-Name) {
(0)       if (&User-Name)  -> TRUE
(0)       if (&User-Name)  {
(0)         if (&User-Name =~ / /) {
(0)         if (&User-Name =~ / /)  -> FALSE
(0)         if (&User-Name =~ /@[^@]*@/ ) {
(0)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(0)         if (&User-Name =~ /\.\./ ) {
(0)         if (&User-Name =~ /\.\./ )  -> FALSE
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(0)         if (&User-Name =~ /\.$/)  {
(0)         if (&User-Name =~ /\.$/)   -> FALSE
(0)         if (&User-Name =~ /@\./)  {
(0)         if (&User-Name =~ /@\./)   -> FALSE
(0)       } # if (&User-Name)  = notfound
(0)     } # policy filter_username = notfound
(0)     [preprocess] = ok
(0)     [chap] = noop
(0)     [mschap] = noop
(0)     [digest] = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: No '@' in User-Name = "cinnis", looking up realm NULL
(0) suffix: No such realm "NULL"
(0)     [suffix] = noop
(0) eap: Peer sent EAP Response (code 2) ID 34 length 11
(0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize
(0)     [eap] = ok
(0)   } # authorize = ok
(0) Found Auth-Type = eap
(0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(0)   authenticate {
(0) eap: Peer sent packet with method EAP Identity (1)
(0) eap: Calling submodule eap_md5 to process data
(0) eap_md5: Issuing MD5 Challenge
(0) eap: Sending EAP Request (code 1) ID 35 length 22
(0) eap: EAP session adding &reply:State = 0xacbf8e2dac9c8a23
(0)     [eap] = handled
(0)   } # authenticate = handled
(0) Using Post-Auth-Type Challenge
(0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(0)   Challenge { ... } # empty sub-section is ignored
(0) Sent Access-Challenge Id 31 from 146.118.55.22:1812 to 202.8.32.153:64998 length 80
(0)   EAP-Message = 0x012300160410f81be1c0c58574328670a9084ba7ce33
(0)   Message-Authenticator = 0x00000000000000000000000000000000
(0)   State = 0xacbf8e2dac9c8a23447f5f0d988fc5a6
(0) Finished request
Waking up in 4.9 seconds.
(1) Received Access-Request Id 32 from 202.8.32.153:64998 to 146.118.55.22:1812 length 267
(1)   User-Name = "cinnis"
(1)   NAS-IP-Address = 202.8.32.153
(1)   NAS-Port = 0
(1)   NAS-Identifier = "202.8.32.153"
(1)   NAS-Port-Type = Wireless-802.11
(1)   Calling-Station-Id = "aef623dbdd7d"
(1)   Called-Station-Id = "b837b2cc82c7"
(1)   Service-Type = Framed-User
(1)   Framed-MTU = 1100
(1)   EAP-Message = 0x022300080319152b
(1)   State = 0xacbf8e2dac9c8a23447f5f0d988fc5a6
(1)   Aruba-Essid-Name = "pawsey-aruba01"
(1)   Aruba-Location-Id = "paw-mgmt-ap01"
(1)   Aruba-AP-Group = "Pawsey"
(1)   Aruba-AP-MAC-Address = "b837b2cc82c7"
(1)   Aruba-Device-MAC-Address = "aef623dbdd7d"
(1)   WLAN-Pairwise-Cipher = 1027081
(1)   WLAN-Group-Cipher = 1027081
(1)   WLAN-Group-Mgmt-Cipher = 1027084
(1)   WLAN-AKM-Suite = 1027084
(1)   Message-Authenticator = 0x0da18016c6e85b1432a7eed37e2c02d1
(1) session-state: No cached attributes
(1) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(1)   authorize {
(1)     policy filter_username {
(1)       if (&User-Name) {
(1)       if (&User-Name)  -> TRUE
(1)       if (&User-Name)  {
(1)         if (&User-Name =~ / /) {
(1)         if (&User-Name =~ / /)  -> FALSE
(1)         if (&User-Name =~ /@[^@]*@/ ) {
(1)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(1)         if (&User-Name =~ /\.\./ ) {
(1)         if (&User-Name =~ /\.\./ )  -> FALSE
(1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(1)         if (&User-Name =~ /\.$/)  {
(1)         if (&User-Name =~ /\.$/)   -> FALSE
(1)         if (&User-Name =~ /@\./)  {
(1)         if (&User-Name =~ /@\./)   -> FALSE
(1)       } # if (&User-Name)  = notfound
(1)     } # policy filter_username = notfound
(1)     [preprocess] = ok
(1)     [chap] = noop
(1)     [mschap] = noop
(1)     [digest] = noop
(1) suffix: Checking for suffix after "@"
(1) suffix: No '@' in User-Name = "cinnis", looking up realm NULL
(1) suffix: No such realm "NULL"
(1)     [suffix] = noop
(1) eap: Peer sent EAP Response (code 2) ID 35 length 8
(1) eap: No EAP Start, assuming it's an on-going EAP conversation
(1)     [eap] = updated
(1)     [files] = noop
rlm_ldap (ldap): Reserved connection (0)
(1) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}})
(1) ldap:    --> (uid=cinnis)
(1) ldap: Performing search in "ou=people,dc=pawsey,dc=org,dc=au" with filter "(uid=cinnis)", scope "sub"
(1) ldap: Waiting for search result...
(1) ldap: User object found at DN "uid=cinnis,ou=people,dc=pawsey,dc=org,dc=au"
(1) ldap: Processing user attributes
(1) ldap: control:Password-With-Header += '{SSHA512}nx/7G2SlyNnOn/GAt9PupHv9tXr+3k1sw0RCEXLOUz0CMR330v4xLfdRfYtkvzfxAQtorEB2igMDtm1Dah7APpeiezp8X9Yh'
rlm_ldap (ldap): Released connection (0)
Need more connections to reach 10 spares
rlm_ldap (ldap): Opening additional connection (5), 1 of 27 pending slots used
rlm_ldap (ldap): Connecting to ldap://ldap-pool.pawsey.org.au:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
(1)     [ldap] = updated
(1)     [expiration] = noop
(1)     [logintime] = noop
(1) pap: Converted: &control:Password-With-Header -> &control:SSHA2-512-Password
(1) pap: Removing &control:Password-With-Header
(1) pap: Normalizing SSHA2-512-Password from base64 encoding, 96 bytes -> 72 bytes
(1) pap: WARNING: Auth-Type already set.  Not setting to PAP
(1)     [pap] = noop
(1)   } # authorize = updated
(1) Found Auth-Type = eap
(1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(1)   authenticate {
(1) eap: Expiring EAP session with state 0xacbf8e2dac9c8a23
(1) eap: Finished EAP session with state 0xacbf8e2dac9c8a23
(1) eap: Previous EAP request found for state 0xacbf8e2dac9c8a23, released from the list
(1) eap: Peer sent packet with method EAP NAK (3)
(1) eap: Found mutually acceptable type PEAP (25)
(1) eap: Calling submodule eap_peap to process data
(1) eap_peap: (TLS) Initiating new session
(1) eap: Sending EAP Request (code 1) ID 36 length 6
(1) eap: EAP session adding &reply:State = 0xacbf8e2dad9b9723
(1)     [eap] = handled
(1)   } # authenticate = handled
(1) Using Post-Auth-Type Challenge
(1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(1)   Challenge { ... } # empty sub-section is ignored
(1) session-state: Saving cached attributes
(1)   Framed-MTU = 994
(1) Sent Access-Challenge Id 32 from 146.118.55.22:1812 to 202.8.32.153:64998 length 64
(1)   EAP-Message = 0x012400061920
(1)   Message-Authenticator = 0x00000000000000000000000000000000
(1)   State = 0xacbf8e2dad9b9723447f5f0d988fc5a6
(1) Finished request
Waking up in 4.9 seconds.
(2) Received Access-Request Id 33 from 202.8.32.153:64998 to 146.118.55.22:1812 length 420
(2)   User-Name = "cinnis"
(2)   NAS-IP-Address = 202.8.32.153
(2)   NAS-Port = 0
(2)   NAS-Identifier = "202.8.32.153"
(2)   NAS-Port-Type = Wireless-802.11
(2)   Calling-Station-Id = "aef623dbdd7d"
(2)   Called-Station-Id = "b837b2cc82c7"
(2)   Service-Type = Framed-User
(2)   Framed-MTU = 1100
(2)   EAP-Message = 0x022400a119800000009716030100920100008e0303658257969eabec888737990ce4b7e8897a8c17fd201a49aae1935abe072a3fce00002c00ffc02cc02bc024c023c00ac009c008c030c02fc028c027c014c013c012009d009c003d003c0035002f000a01000039000a00080006001700180019000b00020100000d00120010040102010501060104030203050306030005000501000000000012000000170000
(2)   State = 0xacbf8e2dad9b9723447f5f0d988fc5a6
(2)   Aruba-Essid-Name = "pawsey-aruba01"
(2)   Aruba-Location-Id = "paw-mgmt-ap01"
(2)   Aruba-AP-Group = "Pawsey"
(2)   Aruba-AP-MAC-Address = "b837b2cc82c7"
(2)   Aruba-Device-MAC-Address = "aef623dbdd7d"
(2)   WLAN-Pairwise-Cipher = 1027081
(2)   WLAN-Group-Cipher = 1027081
(2)   WLAN-Group-Mgmt-Cipher = 1027084
(2)   WLAN-AKM-Suite = 1027084
(2)   Message-Authenticator = 0x41ac94e039eeeb27aa7995d3ec2d12d8
(2) Restoring &session-state
(2)   &session-state:Framed-MTU = 994
(2) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(2)   authorize {
(2)     policy filter_username {
(2)       if (&User-Name) {
(2)       if (&User-Name)  -> TRUE
(2)       if (&User-Name)  {
(2)         if (&User-Name =~ / /) {
(2)         if (&User-Name =~ / /)  -> FALSE
(2)         if (&User-Name =~ /@[^@]*@/ ) {
(2)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(2)         if (&User-Name =~ /\.\./ ) {
(2)         if (&User-Name =~ /\.\./ )  -> FALSE
(2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(2)         if (&User-Name =~ /\.$/)  {
(2)         if (&User-Name =~ /\.$/)   -> FALSE
(2)         if (&User-Name =~ /@\./)  {
(2)         if (&User-Name =~ /@\./)   -> FALSE
(2)       } # if (&User-Name)  = notfound
(2)     } # policy filter_username = notfound
(2)     [preprocess] = ok
(2)     [chap] = noop
(2)     [mschap] = noop
(2)     [digest] = noop
(2) suffix: Checking for suffix after "@"
(2) suffix: No '@' in User-Name = "cinnis", looking up realm NULL
(2) suffix: No such realm "NULL"
(2)     [suffix] = noop
(2) eap: Peer sent EAP Response (code 2) ID 36 length 161
(2) eap: Continuing tunnel setup
(2)     [eap] = ok
(2)   } # authorize = ok
(2) Found Auth-Type = eap
(2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(2)   authenticate {
(2) eap: Expiring EAP session with state 0xacbf8e2dad9b9723
(2) eap: Finished EAP session with state 0xacbf8e2dad9b9723
(2) eap: Previous EAP request found for state 0xacbf8e2dad9b9723, released from the list
(2) eap: Peer sent packet with method EAP PEAP (25)
(2) eap: Calling submodule eap_peap to process data
(2) eap_peap: (TLS) EAP Peer says that the final record size will be 151 bytes
(2) eap_peap: (TLS) EAP Got all data (151 bytes)
(2) eap_peap: (TLS) Handshake state - before SSL initialization
(2) eap_peap: (TLS) Handshake state - Server before SSL initialization
(2) eap_peap: (TLS) Handshake state - Server before SSL initialization
(2) eap_peap: (TLS) recv TLS 1.3 Handshake, ClientHello
(2) eap_peap: (TLS) Handshake state - Server SSLv3/TLS read client hello
(2) eap_peap: (TLS) send TLS 1.2 Handshake, ServerHello
(2) eap_peap: (TLS) Handshake state - Server SSLv3/TLS write server hello
(2) eap_peap: (TLS) send TLS 1.2 Handshake, Certificate
(2) eap_peap: (TLS) Handshake state - Server SSLv3/TLS write certificate
(2) eap_peap: (TLS) send TLS 1.2 Handshake, ServerKeyExchange
(2) eap_peap: (TLS) Handshake state - Server SSLv3/TLS write key exchange
(2) eap_peap: (TLS) send TLS 1.2 Handshake, ServerHelloDone
(2) eap_peap: (TLS) Handshake state - Server SSLv3/TLS write server done
(2) eap_peap: (TLS) Server : Need to read more data: SSLv3/TLS write server done
(2) eap_peap: (TLS) In Handshake Phase
(2) eap: Sending EAP Request (code 1) ID 37 length 1004
(2) eap: EAP session adding &reply:State = 0xacbf8e2dae9a9723
(2)     [eap] = handled
(2)   } # authenticate = handled
(2) Using Post-Auth-Type Challenge
(2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(2)   Challenge { ... } # empty sub-section is ignored
(2) session-state: Saving cached attributes
(2)   Framed-MTU = 994
(2)   TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello"
(2)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello"
(2)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate"
(2)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange"
(2)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone"
(2) Sent Access-Challenge Id 33 from 146.118.55.22:1812 to 202.8.32.153:64998 length 1068
(2)   EAP-Message = 0x012503ec19c0000004b7160303003d0200003903033149d44db36075066fed6bbc685d4369b7889473b1e3a955db966bcb9c69a1fb00c030000011ff01000100000b0004030001020017000016030303150b00031100030e00030b30820307308201efa00302010202144f9061a1e632766cf1e30650c2111644c212039e300d06092a864886f70d01010b050030193117301506035504030c0e7061772d6d676d742d7376723034301e170d3233313231323033313834395a170d3333313230393033313834395a30193117301506035504030c0e7061772d6d676d742d737672303430820122300d06092a864886f70d01010105000382010f003082010a0282010100a0cc25fdcbb3e3bfeaacb179da71513655babfbb15427d809f145d8178c6b8ae287dd19c780a74a9a24c133a9df31006d361bcc756f6a46062aad3500d983389003bdd2bf1eaac53c04bb12f2494ed6d0c50d445e9a2154d011ed651db35fa2d13be28f60fa0017726baf0378c7f021ecdf3b1
(2)   Message-Authenticator = 0x00000000000000000000000000000000
(2)   State = 0xacbf8e2dae9a9723447f5f0d988fc5a6
(2) Finished request
Waking up in 4.9 seconds.
(3) Received Access-Request Id 34 from 202.8.32.153:64998 to 146.118.55.22:1812 length 265
(3)   User-Name = "cinnis"
(3)   NAS-IP-Address = 202.8.32.153
(3)   NAS-Port = 0
(3)   NAS-Identifier = "202.8.32.153"
(3)   NAS-Port-Type = Wireless-802.11
(3)   Calling-Station-Id = "aef623dbdd7d"
(3)   Called-Station-Id = "b837b2cc82c7"
(3)   Service-Type = Framed-User
(3)   Framed-MTU = 1100
(3)   EAP-Message = 0x022500061900
(3)   State = 0xacbf8e2dae9a9723447f5f0d988fc5a6
(3)   Aruba-Essid-Name = "pawsey-aruba01"
(3)   Aruba-Location-Id = "paw-mgmt-ap01"
(3)   Aruba-AP-Group = "Pawsey"
(3)   Aruba-AP-MAC-Address = "b837b2cc82c7"
(3)   Aruba-Device-MAC-Address = "aef623dbdd7d"
(3)   WLAN-Pairwise-Cipher = 1027081
(3)   WLAN-Group-Cipher = 1027081
(3)   WLAN-Group-Mgmt-Cipher = 1027084
(3)   WLAN-AKM-Suite = 1027084
(3)   Message-Authenticator = 0xc6ed1a5762cf7aa597926146d310beaa
(3) Restoring &session-state
(3)   &session-state:Framed-MTU = 994
(3)   &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello"
(3)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello"
(3)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate"
(3)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange"
(3)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone"
(3) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(3)   authorize {
(3)     policy filter_username {
(3)       if (&User-Name) {
(3)       if (&User-Name)  -> TRUE
(3)       if (&User-Name)  {
(3)         if (&User-Name =~ / /) {
(3)         if (&User-Name =~ / /)  -> FALSE
(3)         if (&User-Name =~ /@[^@]*@/ ) {
(3)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(3)         if (&User-Name =~ /\.\./ ) {
(3)         if (&User-Name =~ /\.\./ )  -> FALSE
(3)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(3)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(3)         if (&User-Name =~ /\.$/)  {
(3)         if (&User-Name =~ /\.$/)   -> FALSE
(3)         if (&User-Name =~ /@\./)  {
(3)         if (&User-Name =~ /@\./)   -> FALSE
(3)       } # if (&User-Name)  = notfound
(3)     } # policy filter_username = notfound
(3)     [preprocess] = ok
(3)     [chap] = noop
(3)     [mschap] = noop
(3)     [digest] = noop
(3) suffix: Checking for suffix after "@"
(3) suffix: No '@' in User-Name = "cinnis", looking up realm NULL
(3) suffix: No such realm "NULL"
(3)     [suffix] = noop
(3) eap: Peer sent EAP Response (code 2) ID 37 length 6
(3) eap: Continuing tunnel setup
(3)     [eap] = ok
(3)   } # authorize = ok
(3) Found Auth-Type = eap
(3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(3)   authenticate {
(3) eap: Expiring EAP session with state 0xacbf8e2dae9a9723
(3) eap: Finished EAP session with state 0xacbf8e2dae9a9723
(3) eap: Previous EAP request found for state 0xacbf8e2dae9a9723, released from the list
(3) eap: Peer sent packet with method EAP PEAP (25)
(3) eap: Calling submodule eap_peap to process data
(3) eap_peap: (TLS) Peer ACKed our handshake fragment
(3) eap: Sending EAP Request (code 1) ID 38 length 219
(3) eap: EAP session adding &reply:State = 0xacbf8e2daf999723
(3)     [eap] = handled
(3)   } # authenticate = handled
(3) Using Post-Auth-Type Challenge
(3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(3)   Challenge { ... } # empty sub-section is ignored
(3) session-state: Saving cached attributes
(3)   Framed-MTU = 994
(3)   TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello"
(3)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello"
(3)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate"
(3)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange"
(3)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone"
(3) Sent Access-Challenge Id 34 from 146.118.55.22:1812 to 202.8.32.153:64998 length 277
(3)   EAP-Message = 0x012600db190081d6599b85f5ae458d1c1f2693a2ff6de32f92243c82cc5c43b74d23858dc3fe15c43180ac6ee82628e764ad376431085cfa8f595b43cecf51564fc58557f645bdae4a8cb6192359b285198020f06468cbe6122710a3b48d9455e017419c446e28ec60b7b0466955b98451d167f9f5537b850cca3622fb2445871cbfb30d82ee4636db92de8bb91d760baa4a98ab59daaf99d2c522369c16e614a5ec758afccca22f2919aa7b67c45b4b4d8874f94e41c28d1c8d63450c6cad5ea4c0ba25fe88c5bdd9c982022fa6e4b93f5716030300040e000000
(3)   Message-Authenticator = 0x00000000000000000000000000000000
(3)   State = 0xacbf8e2daf999723447f5f0d988fc5a6
(3) Finished request
Waking up in 4.9 seconds.
(4) Received Access-Request Id 35 from 202.8.32.153:64998 to 146.118.55.22:1812 length 395
(4)   User-Name = "cinnis"
(4)   NAS-IP-Address = 202.8.32.153
(4)   NAS-Port = 0
(4)   NAS-Identifier = "202.8.32.153"
(4)   NAS-Port-Type = Wireless-802.11
(4)   Calling-Station-Id = "aef623dbdd7d"
(4)   Called-Station-Id = "b837b2cc82c7"
(4)   Service-Type = Framed-User
(4)   Framed-MTU = 1100
(4)   EAP-Message = 0x0226008819800000007e1603030046100000424104b46f177c54099766e9ea709a123c22b0facecbe7f746ed35b53b95929abc8a1b391d0db8e79eb497e8167c5404c66924ebf488aefa9783a5bc931098976db1c9140303000101160303002885ad6f7b5100450f2a1365da8f33c95e6e36a745c9b79350efe834acdc8bbee182a58efdbe506f96
(4)   State = 0xacbf8e2daf999723447f5f0d988fc5a6
(4)   Aruba-Essid-Name = "pawsey-aruba01"
(4)   Aruba-Location-Id = "paw-mgmt-ap01"
(4)   Aruba-AP-Group = "Pawsey"
(4)   Aruba-AP-MAC-Address = "b837b2cc82c7"
(4)   Aruba-Device-MAC-Address = "aef623dbdd7d"
(4)   WLAN-Pairwise-Cipher = 1027081
(4)   WLAN-Group-Cipher = 1027081
(4)   WLAN-Group-Mgmt-Cipher = 1027084
(4)   WLAN-AKM-Suite = 1027084
(4)   Message-Authenticator = 0xb7aa9e69a1ac50f578088035570a5c8f
(4) Restoring &session-state
(4)   &session-state:Framed-MTU = 994
(4)   &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello"
(4)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello"
(4)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate"
(4)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange"
(4)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone"
(4) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(4)   authorize {
(4)     policy filter_username {
(4)       if (&User-Name) {
(4)       if (&User-Name)  -> TRUE
(4)       if (&User-Name)  {
(4)         if (&User-Name =~ / /) {
(4)         if (&User-Name =~ / /)  -> FALSE
(4)         if (&User-Name =~ /@[^@]*@/ ) {
(4)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(4)         if (&User-Name =~ /\.\./ ) {
(4)         if (&User-Name =~ /\.\./ )  -> FALSE
(4)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(4)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(4)         if (&User-Name =~ /\.$/)  {
(4)         if (&User-Name =~ /\.$/)   -> FALSE
(4)         if (&User-Name =~ /@\./)  {
(4)         if (&User-Name =~ /@\./)   -> FALSE
(4)       } # if (&User-Name)  = notfound
(4)     } # policy filter_username = notfound
(4)     [preprocess] = ok
(4)     [chap] = noop
(4)     [mschap] = noop
(4)     [digest] = noop
(4) suffix: Checking for suffix after "@"
(4) suffix: No '@' in User-Name = "cinnis", looking up realm NULL
(4) suffix: No such realm "NULL"
(4)     [suffix] = noop
(4) eap: Peer sent EAP Response (code 2) ID 38 length 136
(4) eap: Continuing tunnel setup
(4)     [eap] = ok
(4)   } # authorize = ok
(4) Found Auth-Type = eap
(4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(4)   authenticate {
(4) eap: Expiring EAP session with state 0xacbf8e2daf999723
(4) eap: Finished EAP session with state 0xacbf8e2daf999723
(4) eap: Previous EAP request found for state 0xacbf8e2daf999723, released from the list
(4) eap: Peer sent packet with method EAP PEAP (25)
(4) eap: Calling submodule eap_peap to process data
(4) eap_peap: (TLS) EAP Peer says that the final record size will be 126 bytes
(4) eap_peap: (TLS) EAP Got all data (126 bytes)
(4) eap_peap: (TLS) Handshake state - Server SSLv3/TLS write server done
(4) eap_peap: (TLS) recv TLS 1.2 Handshake, ClientKeyExchange
(4) eap_peap: (TLS) Handshake state - Server SSLv3/TLS read client key exchange
(4) eap_peap: (TLS) Handshake state - Server SSLv3/TLS read change cipher spec
(4) eap_peap: (TLS) recv TLS 1.2 Handshake, Finished
(4) eap_peap: (TLS) Handshake state - Server SSLv3/TLS read finished
(4) eap_peap: (TLS) send TLS 1.2 ChangeCipherSpec
(4) eap_peap: (TLS) Handshake state - Server SSLv3/TLS write change cipher spec
(4) eap_peap: (TLS) send TLS 1.2 Handshake, Finished
(4) eap_peap: (TLS) Handshake state - Server SSLv3/TLS write finished
(4) eap_peap: (TLS) Handshake state - SSL negotiation finished successfully
(4) eap_peap: (TLS) Connection Established
(4) eap_peap:   TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"
(4) eap_peap:   TLS-Session-Version = "TLS 1.2"
(4) eap: Sending EAP Request (code 1) ID 39 length 57
(4) eap: EAP session adding &reply:State = 0xacbf8e2da8989723
(4)     [eap] = handled
(4)   } # authenticate = handled
(4) Using Post-Auth-Type Challenge
(4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(4)   Challenge { ... } # empty sub-section is ignored
(4) session-state: Saving cached attributes
(4)   Framed-MTU = 994
(4)   TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello"
(4)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello"
(4)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate"
(4)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange"
(4)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone"
(4)   TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, ClientKeyExchange"
(4)   TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished"
(4)   TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec"
(4)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished"
(4)   TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"
(4)   TLS-Session-Version = "TLS 1.2"
(4) Sent Access-Challenge Id 35 from 146.118.55.22:1812 to 202.8.32.153:64998 length 115
(4)   EAP-Message = 0x0127003919001403030001011603030028adadc0d8bac571660801b6061e715d09965c990efff3734d505445672aa0dd6e413c9a872c786179
(4)   Message-Authenticator = 0x00000000000000000000000000000000
(4)   State = 0xacbf8e2da8989723447f5f0d988fc5a6
(4) Finished request
Waking up in 4.8 seconds.
(5) Received Access-Request Id 36 from 202.8.32.153:64998 to 146.118.55.22:1812 length 265
(5)   User-Name = "cinnis"
(5)   NAS-IP-Address = 202.8.32.153
(5)   NAS-Port = 0
(5)   NAS-Identifier = "202.8.32.153"
(5)   NAS-Port-Type = Wireless-802.11
(5)   Calling-Station-Id = "aef623dbdd7d"
(5)   Called-Station-Id = "b837b2cc82c7"
(5)   Service-Type = Framed-User
(5)   Framed-MTU = 1100
(5)   EAP-Message = 0x022700061900
(5)   State = 0xacbf8e2da8989723447f5f0d988fc5a6
(5)   Aruba-Essid-Name = "pawsey-aruba01"
(5)   Aruba-Location-Id = "paw-mgmt-ap01"
(5)   Aruba-AP-Group = "Pawsey"
(5)   Aruba-AP-MAC-Address = "b837b2cc82c7"
(5)   Aruba-Device-MAC-Address = "aef623dbdd7d"
(5)   WLAN-Pairwise-Cipher = 1027081
(5)   WLAN-Group-Cipher = 1027081
(5)   WLAN-Group-Mgmt-Cipher = 1027084
(5)   WLAN-AKM-Suite = 1027084
(5)   Message-Authenticator = 0x793a0acd9005fabc0fb41c74cbe98639
(5) Restoring &session-state
(5)   &session-state:Framed-MTU = 994
(5)   &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello"
(5)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello"
(5)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate"
(5)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange"
(5)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone"
(5)   &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, ClientKeyExchange"
(5)   &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished"
(5)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec"
(5)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished"
(5)   &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"
(5)   &session-state:TLS-Session-Version = "TLS 1.2"
(5) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(5)   authorize {
(5)     policy filter_username {
(5)       if (&User-Name) {
(5)       if (&User-Name)  -> TRUE
(5)       if (&User-Name)  {
(5)         if (&User-Name =~ / /) {
(5)         if (&User-Name =~ / /)  -> FALSE
(5)         if (&User-Name =~ /@[^@]*@/ ) {
(5)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(5)         if (&User-Name =~ /\.\./ ) {
(5)         if (&User-Name =~ /\.\./ )  -> FALSE
(5)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(5)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(5)         if (&User-Name =~ /\.$/)  {
(5)         if (&User-Name =~ /\.$/)   -> FALSE
(5)         if (&User-Name =~ /@\./)  {
(5)         if (&User-Name =~ /@\./)   -> FALSE
(5)       } # if (&User-Name)  = notfound
(5)     } # policy filter_username = notfound
(5)     [preprocess] = ok
(5)     [chap] = noop
(5)     [mschap] = noop
(5)     [digest] = noop
(5) suffix: Checking for suffix after "@"
(5) suffix: No '@' in User-Name = "cinnis", looking up realm NULL
(5) suffix: No such realm "NULL"
(5)     [suffix] = noop
(5) eap: Peer sent EAP Response (code 2) ID 39 length 6
(5) eap: Continuing tunnel setup
(5)     [eap] = ok
(5)   } # authorize = ok
(5) Found Auth-Type = eap
(5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(5)   authenticate {
(5) eap: Expiring EAP session with state 0xacbf8e2da8989723
(5) eap: Finished EAP session with state 0xacbf8e2da8989723
(5) eap: Previous EAP request found for state 0xacbf8e2da8989723, released from the list
(5) eap: Peer sent packet with method EAP PEAP (25)
(5) eap: Calling submodule eap_peap to process data
(5) eap_peap: (TLS) Peer ACKed our handshake fragment.  handshake is finished
(5) eap_peap: Session established.  Decoding tunneled attributes
(5) eap_peap: PEAP state TUNNEL ESTABLISHED
(5) eap: Sending EAP Request (code 1) ID 40 length 40
(5) eap: EAP session adding &reply:State = 0xacbf8e2da9979723
(5)     [eap] = handled
(5)   } # authenticate = handled
(5) Using Post-Auth-Type Challenge
(5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(5)   Challenge { ... } # empty sub-section is ignored
(5) session-state: Saving cached attributes
(5)   Framed-MTU = 994
(5)   TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello"
(5)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello"
(5)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate"
(5)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange"
(5)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone"
(5)   TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, ClientKeyExchange"
(5)   TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished"
(5)   TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec"
(5)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished"
(5)   TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"
(5)   TLS-Session-Version = "TLS 1.2"
(5) Sent Access-Challenge Id 36 from 146.118.55.22:1812 to 202.8.32.153:64998 length 98
(5)   EAP-Message = 0x012800281900170303001dadadc0d8bac571673d34fcf19da62cc342aa46fd9f4c1e25eee85abab0
(5)   Message-Authenticator = 0x00000000000000000000000000000000
(5)   State = 0xacbf8e2da9979723447f5f0d988fc5a6
(5) Finished request
Waking up in 4.8 seconds.
(6) Received Access-Request Id 37 from 202.8.32.153:64998 to 146.118.55.22:1812 length 301
(6)   User-Name = "cinnis"
(6)   NAS-IP-Address = 202.8.32.153
(6)   NAS-Port = 0
(6)   NAS-Identifier = "202.8.32.153"
(6)   NAS-Port-Type = Wireless-802.11
(6)   Calling-Station-Id = "aef623dbdd7d"
(6)   Called-Station-Id = "b837b2cc82c7"
(6)   Service-Type = Framed-User
(6)   Framed-MTU = 1100
(6)   EAP-Message = 0x0228002a1900170303001f85ad6f7b51004510436531d625b8985bee0d04b04fe10b9fe3c2b6be08d03e
(6)   State = 0xacbf8e2da9979723447f5f0d988fc5a6
(6)   Aruba-Essid-Name = "pawsey-aruba01"
(6)   Aruba-Location-Id = "paw-mgmt-ap01"
(6)   Aruba-AP-Group = "Pawsey"
(6)   Aruba-AP-MAC-Address = "b837b2cc82c7"
(6)   Aruba-Device-MAC-Address = "aef623dbdd7d"
(6)   WLAN-Pairwise-Cipher = 1027081
(6)   WLAN-Group-Cipher = 1027081
(6)   WLAN-Group-Mgmt-Cipher = 1027084
(6)   WLAN-AKM-Suite = 1027084
(6)   Message-Authenticator = 0xc838f6a2988a899a1ab7f2f936acba3a
(6) Restoring &session-state
(6)   &session-state:Framed-MTU = 994
(6)   &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello"
(6)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello"
(6)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate"
(6)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange"
(6)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone"
(6)   &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, ClientKeyExchange"
(6)   &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished"
(6)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec"
(6)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished"
(6)   &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"
(6)   &session-state:TLS-Session-Version = "TLS 1.2"
(6) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(6)   authorize {
(6)     policy filter_username {
(6)       if (&User-Name) {
(6)       if (&User-Name)  -> TRUE
(6)       if (&User-Name)  {
(6)         if (&User-Name =~ / /) {
(6)         if (&User-Name =~ / /)  -> FALSE
(6)         if (&User-Name =~ /@[^@]*@/ ) {
(6)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(6)         if (&User-Name =~ /\.\./ ) {
(6)         if (&User-Name =~ /\.\./ )  -> FALSE
(6)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(6)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(6)         if (&User-Name =~ /\.$/)  {
(6)         if (&User-Name =~ /\.$/)   -> FALSE
(6)         if (&User-Name =~ /@\./)  {
(6)         if (&User-Name =~ /@\./)   -> FALSE
(6)       } # if (&User-Name)  = notfound
(6)     } # policy filter_username = notfound
(6)     [preprocess] = ok
(6)     [chap] = noop
(6)     [mschap] = noop
(6)     [digest] = noop
(6) suffix: Checking for suffix after "@"
(6) suffix: No '@' in User-Name = "cinnis", looking up realm NULL
(6) suffix: No such realm "NULL"
(6)     [suffix] = noop
(6) eap: Peer sent EAP Response (code 2) ID 40 length 42
(6) eap: Continuing tunnel setup
(6)     [eap] = ok
(6)   } # authorize = ok
(6) Found Auth-Type = eap
(6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(6)   authenticate {
(6) eap: Expiring EAP session with state 0xacbf8e2da9979723
(6) eap: Finished EAP session with state 0xacbf8e2da9979723
(6) eap: Previous EAP request found for state 0xacbf8e2da9979723, released from the list
(6) eap: Peer sent packet with method EAP PEAP (25)
(6) eap: Calling submodule eap_peap to process data
(6) eap_peap: (TLS) EAP Done initial handshake
(6) eap_peap: Session established.  Decoding tunneled attributes
(6) eap_peap: PEAP state WAITING FOR INNER IDENTITY
(6) eap_peap: Identity - cinnis
(6) eap_peap: Got inner identity 'cinnis'
(6) eap_peap: Setting default EAP type for tunneled EAP session
(6) eap_peap: Got tunneled request
(6) eap_peap:   EAP-Message = 0x0228000b0163696e6e6973
(6) eap_peap: Setting User-Name to cinnis
(6) eap_peap: Sending tunneled request to inner-tunnel
(6) eap_peap:   EAP-Message = 0x0228000b0163696e6e6973
(6) eap_peap:   FreeRADIUS-Proxied-To = 127.0.0.1
(6) eap_peap:   User-Name = "cinnis"
(6) Virtual server inner-tunnel received request
(6)   EAP-Message = 0x0228000b0163696e6e6973
(6)   FreeRADIUS-Proxied-To = 127.0.0.1
(6)   User-Name = "cinnis"
(6) WARNING: Outer and inner identities are the same.  User privacy is compromised.
(6) server inner-tunnel {
(6)   # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel
(6)     authorize {
(6)       policy filter_username {
(6)         if (&User-Name) {
(6)         if (&User-Name)  -> TRUE
(6)         if (&User-Name)  {
(6)           if (&User-Name =~ / /) {
(6)           if (&User-Name =~ / /)  -> FALSE
(6)           if (&User-Name =~ /@[^@]*@/ ) {
(6)           if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(6)           if (&User-Name =~ /\.\./ ) {
(6)           if (&User-Name =~ /\.\./ )  -> FALSE
(6)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(6)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(6)           if (&User-Name =~ /\.$/)  {
(6)           if (&User-Name =~ /\.$/)   -> FALSE
(6)           if (&User-Name =~ /@\./)  {
(6)           if (&User-Name =~ /@\./)   -> FALSE
(6)         } # if (&User-Name)  = notfound
(6)       } # policy filter_username = notfound
(6)       [chap] = noop
(6) suffix: Checking for suffix after "@"
(6) suffix: No '@' in User-Name = "cinnis", looking up realm NULL
(6) suffix: No such realm "NULL"
(6)       [suffix] = noop
(6)       update control {
(6)         &Proxy-To-Realm := LOCAL
(6)       } # update control = noop
(6) eap: Peer sent EAP Response (code 2) ID 40 length 11
(6) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize
(6)       [eap] = ok
(6)     } # authorize = ok
(6)   Found Auth-Type = eap
(6)   # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel
(6)     authenticate {
(6) eap: Peer sent packet with method EAP Identity (1)
(6) eap: Calling submodule eap_mschapv2 to process data
(6) eap_mschapv2: Issuing Challenge
(6) eap: Sending EAP Request (code 1) ID 41 length 43
(6) eap: EAP session adding &reply:State = 0x2e43fcfd2e6ae697
(6)       [eap] = handled
(6)     } # authenticate = handled
(6) } # server inner-tunnel
(6) Virtual server sending reply
(6)   EAP-Message = 0x0129002b1a01290026107782beaf28a29753aaaa8735c1e80502667265657261646975732d332e302e3236
(6)   Message-Authenticator = 0x00000000000000000000000000000000
(6)   State = 0x2e43fcfd2e6ae69791d2eb31eacfa999
(6) eap_peap: Got tunneled reply code 11
(6) eap_peap:   EAP-Message = 0x0129002b1a01290026107782beaf28a29753aaaa8735c1e80502667265657261646975732d332e302e3236
(6) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000
(6) eap_peap:   State = 0x2e43fcfd2e6ae69791d2eb31eacfa999
(6) eap_peap: Got tunneled reply RADIUS code 11
(6) eap_peap:   EAP-Message = 0x0129002b1a01290026107782beaf28a29753aaaa8735c1e80502667265657261646975732d332e302e3236
(6) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000
(6) eap_peap:   State = 0x2e43fcfd2e6ae69791d2eb31eacfa999
(6) eap_peap: Got tunneled Access-Challenge
(6) eap: Sending EAP Request (code 1) ID 41 length 74
(6) eap: EAP session adding &reply:State = 0xacbf8e2daa969723
(6)     [eap] = handled
(6)   } # authenticate = handled
(6) Using Post-Auth-Type Challenge
(6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(6)   Challenge { ... } # empty sub-section is ignored
(6) session-state: Saving cached attributes
(6)   Framed-MTU = 994
(6)   TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello"
(6)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello"
(6)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate"
(6)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange"
(6)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone"
(6)   TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, ClientKeyExchange"
(6)   TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished"
(6)   TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec"
(6)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished"
(6)   TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"
(6)   TLS-Session-Version = "TLS 1.2"
(6) Sent Access-Challenge Id 37 from 146.118.55.22:1812 to 202.8.32.153:64998 length 132
(6)   EAP-Message = 0x0129004a1900170303003fadadc0d8bac57168169ea553441fae056b4b81c61ccc1aa325adda636fd76131712a09458793559d9c3d405107ea0d82762f62151e81f80eef5e805661fd55
(6)   Message-Authenticator = 0x00000000000000000000000000000000
(6)   State = 0xacbf8e2daa969723447f5f0d988fc5a6
(6) Finished request
Waking up in 4.8 seconds.
(7) Received Access-Request Id 38 from 202.8.32.153:64998 to 146.118.55.22:1812 length 355
(7)   User-Name = "cinnis"
(7)   NAS-IP-Address = 202.8.32.153
(7)   NAS-Port = 0
(7)   NAS-Identifier = "202.8.32.153"
(7)   NAS-Port-Type = Wireless-802.11
(7)   Calling-Station-Id = "aef623dbdd7d"
(7)   Called-Station-Id = "b837b2cc82c7"
(7)   Service-Type = Framed-User
(7)   Framed-MTU = 1100
(7)   EAP-Message = 0x022900601900170303005585ad6f7b51004511bf7522d9301d7bcefdd3a583e613c0851a7768a77374a35c81ecf65b0889485da2fa99e7e02acc39871d28cf6defca36ff9e54a0071e536fb4f4f5bac20ad967b81d2cea5e490076ebb7ca7d1d
(7)   State = 0xacbf8e2daa969723447f5f0d988fc5a6
(7)   Aruba-Essid-Name = "pawsey-aruba01"
(7)   Aruba-Location-Id = "paw-mgmt-ap01"
(7)   Aruba-AP-Group = "Pawsey"
(7)   Aruba-AP-MAC-Address = "b837b2cc82c7"
(7)   Aruba-Device-MAC-Address = "aef623dbdd7d"
(7)   WLAN-Pairwise-Cipher = 1027081
(7)   WLAN-Group-Cipher = 1027081
(7)   WLAN-Group-Mgmt-Cipher = 1027084
(7)   WLAN-AKM-Suite = 1027084
(7)   Message-Authenticator = 0x2662a952fe880851d5c8b6c082d48c8c
(7) Restoring &session-state
(7)   &session-state:Framed-MTU = 994
(7)   &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello"
(7)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello"
(7)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate"
(7)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange"
(7)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone"
(7)   &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, ClientKeyExchange"
(7)   &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished"
(7)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec"
(7)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished"
(7)   &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"
(7)   &session-state:TLS-Session-Version = "TLS 1.2"
(7) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(7)   authorize {
(7)     policy filter_username {
(7)       if (&User-Name) {
(7)       if (&User-Name)  -> TRUE
(7)       if (&User-Name)  {
(7)         if (&User-Name =~ / /) {
(7)         if (&User-Name =~ / /)  -> FALSE
(7)         if (&User-Name =~ /@[^@]*@/ ) {
(7)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(7)         if (&User-Name =~ /\.\./ ) {
(7)         if (&User-Name =~ /\.\./ )  -> FALSE
(7)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(7)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(7)         if (&User-Name =~ /\.$/)  {
(7)         if (&User-Name =~ /\.$/)   -> FALSE
(7)         if (&User-Name =~ /@\./)  {
(7)         if (&User-Name =~ /@\./)   -> FALSE
(7)       } # if (&User-Name)  = notfound
(7)     } # policy filter_username = notfound
(7)     [preprocess] = ok
(7)     [chap] = noop
(7)     [mschap] = noop
(7)     [digest] = noop
(7) suffix: Checking for suffix after "@"
(7) suffix: No '@' in User-Name = "cinnis", looking up realm NULL
(7) suffix: No such realm "NULL"
(7)     [suffix] = noop
(7) eap: Peer sent EAP Response (code 2) ID 41 length 96
(7) eap: Continuing tunnel setup
(7)     [eap] = ok
(7)   } # authorize = ok
(7) Found Auth-Type = eap
(7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(7)   authenticate {
(7) eap: Expiring EAP session with state 0x2e43fcfd2e6ae697
(7) eap: Finished EAP session with state 0xacbf8e2daa969723
(7) eap: Previous EAP request found for state 0xacbf8e2daa969723, released from the list
(7) eap: Peer sent packet with method EAP PEAP (25)
(7) eap: Calling submodule eap_peap to process data
(7) eap_peap: (TLS) EAP Done initial handshake
(7) eap_peap: Session established.  Decoding tunneled attributes
(7) eap_peap: PEAP state phase2
(7) eap_peap: EAP method MSCHAPv2 (26)
(7) eap_peap: Got tunneled request
(7) eap_peap:   EAP-Message = 0x022900411a0229003c31a72220197244c30038b38ac77f0844570000000000000000d68f2ca22b77c9ba02a72ed883ffbd1aac3115947968f01d0063696e6e6973
(7) eap_peap: Setting User-Name to cinnis
(7) eap_peap: Sending tunneled request to inner-tunnel
(7) eap_peap:   EAP-Message = 0x022900411a0229003c31a72220197244c30038b38ac77f0844570000000000000000d68f2ca22b77c9ba02a72ed883ffbd1aac3115947968f01d0063696e6e6973
(7) eap_peap:   FreeRADIUS-Proxied-To = 127.0.0.1
(7) eap_peap:   User-Name = "cinnis"
(7) eap_peap:   State = 0x2e43fcfd2e6ae69791d2eb31eacfa999
(7) Virtual server inner-tunnel received request
(7)   EAP-Message = 0x022900411a0229003c31a72220197244c30038b38ac77f0844570000000000000000d68f2ca22b77c9ba02a72ed883ffbd1aac3115947968f01d0063696e6e6973
(7)   FreeRADIUS-Proxied-To = 127.0.0.1
(7)   User-Name = "cinnis"
(7)   State = 0x2e43fcfd2e6ae69791d2eb31eacfa999
(7) WARNING: Outer and inner identities are the same.  User privacy is compromised.
(7) server inner-tunnel {
(7)   session-state: No cached attributes
(7)   # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel
(7)     authorize {
(7)       policy filter_username {
(7)         if (&User-Name) {
(7)         if (&User-Name)  -> TRUE
(7)         if (&User-Name)  {
(7)           if (&User-Name =~ / /) {
(7)           if (&User-Name =~ / /)  -> FALSE
(7)           if (&User-Name =~ /@[^@]*@/ ) {
(7)           if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(7)           if (&User-Name =~ /\.\./ ) {
(7)           if (&User-Name =~ /\.\./ )  -> FALSE
(7)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(7)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(7)           if (&User-Name =~ /\.$/)  {
(7)           if (&User-Name =~ /\.$/)   -> FALSE
(7)           if (&User-Name =~ /@\./)  {
(7)           if (&User-Name =~ /@\./)   -> FALSE
(7)         } # if (&User-Name)  = notfound
(7)       } # policy filter_username = notfound
(7)       [chap] = noop
(7) suffix: Checking for suffix after "@"
(7) suffix: No '@' in User-Name = "cinnis", looking up realm NULL
(7) suffix: No such realm "NULL"
(7)       [suffix] = noop
(7)       update control {
(7)         &Proxy-To-Realm := LOCAL
(7)       } # update control = noop
(7) eap: Peer sent EAP Response (code 2) ID 41 length 65
(7) eap: No EAP Start, assuming it's an on-going EAP conversation
(7)       [eap] = updated
(7)       [files] = noop
rlm_ldap (ldap): Reserved connection (1)
(7) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}})
(7) ldap:    --> (uid=cinnis)
(7) ldap: Performing search in "ou=people,dc=pawsey,dc=org,dc=au" with filter "(uid=cinnis)", scope "sub"
(7) ldap: Waiting for search result...
(7) ldap: User object found at DN "uid=cinnis,ou=people,dc=pawsey,dc=org,dc=au"
(7) ldap: Processing user attributes
(7) ldap: control:Password-With-Header += '{SSHA512}nx/7G2SlyNnOn/GAt9PupHv9tXr+3k1sw0RCEXLOUz0CMR330v4xLfdRfYtkvzfxAQtorEB2igMDtm1Dah7APpeiezp8X9Yh'
rlm_ldap (ldap): Released connection (1)
(7)       [ldap] = updated
(7)       [expiration] = noop
(7)       [logintime] = noop
(7) pap: Converted: &control:Password-With-Header -> &control:SSHA2-512-Password
(7) pap: Removing &control:Password-With-Header
(7) pap: Normalizing SSHA2-512-Password from base64 encoding, 96 bytes -> 72 bytes
(7) pap: WARNING: Auth-Type already set.  Not setting to PAP
(7)       [pap] = noop
(7)     } # authorize = updated
(7)   Found Auth-Type = eap
(7)   # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel
(7)     authenticate {
(7) eap: Expiring EAP session with state 0x2e43fcfd2e6ae697
(7) eap: Finished EAP session with state 0x2e43fcfd2e6ae697
(7) eap: Previous EAP request found for state 0x2e43fcfd2e6ae697, released from the list
(7) eap: Peer sent packet with method EAP MSCHAPv2 (26)
(7) eap: Calling submodule eap_mschapv2 to process data
(7) eap_mschapv2: # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel
(7) eap_mschapv2:   authenticate {
(7) mschap: WARNING: No Cleartext-Password configured.  Cannot create NT-Password
(7) mschap: Creating challenge hash with username: cinnis
(7) mschap: Client is using MS-CHAPv2
(7) mschap: ERROR: FAILED: No NT-Password.  Cannot perform authentication
(7) mschap: ERROR: MS-CHAP2-Response is incorrect
(7) eap_mschapv2:     [mschap] = reject
(7) eap_mschapv2:   } # authenticate = reject
(7) eap: Sending EAP Failure (code 4) ID 41 length 4
(7) eap: Freeing handler
(7)       [eap] = reject
(7)     } # authenticate = reject
(7)   Failed to authenticate the user
(7)   Using Post-Auth-Type Reject
(7)   # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel
(7)     Post-Auth-Type REJECT {
(7) attr_filter.access_reject: EXPAND %{User-Name}
(7) attr_filter.access_reject:    --> cinnis
(7) attr_filter.access_reject: Matched entry DEFAULT at line 11
(7)       [attr_filter.access_reject] = updated
(7)       update outer.session-state {
(7)         &Module-Failure-Message := &request:Module-Failure-Message -> 'mschap: FAILED: No NT-Password.  Cannot perform authentication'
(7)       } # update outer.session-state = noop
(7)     } # Post-Auth-Type REJECT = updated
(7) } # server inner-tunnel
(7) Virtual server sending reply
(7)   MS-CHAP-Error = ")E=691 R=1 C=b6fadc319ac0a2784f689ea7332565c9 V=3 M=Authentication rejected"
(7)   EAP-Message = 0x04290004
(7)   Message-Authenticator = 0x00000000000000000000000000000000
(7) eap_peap: Got tunneled reply code 3
(7) eap_peap:   MS-CHAP-Error = ")E=691 R=1 C=b6fadc319ac0a2784f689ea7332565c9 V=3 M=Authentication rejected"
(7) eap_peap:   EAP-Message = 0x04290004
(7) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000
(7) eap_peap: Got tunneled reply RADIUS code 3
(7) eap_peap:   MS-CHAP-Error = ")E=691 R=1 C=b6fadc319ac0a2784f689ea7332565c9 V=3 M=Authentication rejected"
(7) eap_peap:   EAP-Message = 0x04290004
(7) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000
(7) eap_peap: Tunneled authentication was rejected
(7) eap_peap: FAILURE
(7) eap: Sending EAP Request (code 1) ID 42 length 46
(7) eap: EAP session adding &reply:State = 0xacbf8e2dab959723
(7)     [eap] = handled
(7)   } # authenticate = handled
(7) Using Post-Auth-Type Challenge
(7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(7)   Challenge { ... } # empty sub-section is ignored
(7) session-state: Saving cached attributes
(7)   Framed-MTU = 994
(7)   TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello"
(7)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello"
(7)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate"
(7)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange"
(7)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone"
(7)   TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, ClientKeyExchange"
(7)   TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished"
(7)   TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec"
(7)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished"
(7)   TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"
(7)   TLS-Session-Version = "TLS 1.2"
(7)   Module-Failure-Message := "mschap: FAILED: No NT-Password.  Cannot perform authentication"
(7) Sent Access-Challenge Id 38 from 146.118.55.22:1812 to 202.8.32.153:64998 length 104
(7)   EAP-Message = 0x012a002e19001703030023adadc0d8bac571691422853e29e1488bede09f06ee11589b59c4f69816e1b3493109bf
(7)   Message-Authenticator = 0x00000000000000000000000000000000
(7)   State = 0xacbf8e2dab959723447f5f0d988fc5a6
(7) Finished request
Waking up in 4.8 seconds.
(8) Received Access-Request Id 39 from 202.8.32.153:64998 to 146.118.55.22:1812 length 305
(8)   User-Name = "cinnis"
(8)   NAS-IP-Address = 202.8.32.153
(8)   NAS-Port = 0
(8)   NAS-Identifier = "202.8.32.153"
(8)   NAS-Port-Type = Wireless-802.11
(8)   Calling-Station-Id = "aef623dbdd7d"
(8)   Called-Station-Id = "b837b2cc82c7"
(8)   Service-Type = Framed-User
(8)   Framed-MTU = 1100
(8)   EAP-Message = 0x022a002e1900170303002385ad6f7b510045124a6c7543d95cf4c13d2688d43fee9bfbc37b92550f05040ebad2e0
(8)   State = 0xacbf8e2dab959723447f5f0d988fc5a6
(8)   Aruba-Essid-Name = "pawsey-aruba01"
(8)   Aruba-Location-Id = "paw-mgmt-ap01"
(8)   Aruba-AP-Group = "Pawsey"
(8)   Aruba-AP-MAC-Address = "b837b2cc82c7"
(8)   Aruba-Device-MAC-Address = "aef623dbdd7d"
(8)   WLAN-Pairwise-Cipher = 1027081
(8)   WLAN-Group-Cipher = 1027081
(8)   WLAN-Group-Mgmt-Cipher = 1027084
(8)   WLAN-AKM-Suite = 1027084
(8)   Message-Authenticator = 0x0b7fd77c594812484ce9443a8580abea
(8) Restoring &session-state
(8)   &session-state:Framed-MTU = 994
(8)   &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello"
(8)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello"
(8)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate"
(8)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange"
(8)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone"
(8)   &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, ClientKeyExchange"
(8)   &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished"
(8)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec"
(8)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished"
(8)   &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"
(8)   &session-state:TLS-Session-Version = "TLS 1.2"
(8)   &session-state:Module-Failure-Message := "mschap: FAILED: No NT-Password.  Cannot perform authentication"
(8) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(8)   authorize {
(8)     policy filter_username {
(8)       if (&User-Name) {
(8)       if (&User-Name)  -> TRUE
(8)       if (&User-Name)  {
(8)         if (&User-Name =~ / /) {
(8)         if (&User-Name =~ / /)  -> FALSE
(8)         if (&User-Name =~ /@[^@]*@/ ) {
(8)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(8)         if (&User-Name =~ /\.\./ ) {
(8)         if (&User-Name =~ /\.\./ )  -> FALSE
(8)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(8)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(8)         if (&User-Name =~ /\.$/)  {
(8)         if (&User-Name =~ /\.$/)   -> FALSE
(8)         if (&User-Name =~ /@\./)  {
(8)         if (&User-Name =~ /@\./)   -> FALSE
(8)       } # if (&User-Name)  = notfound
(8)     } # policy filter_username = notfound
(8)     [preprocess] = ok
(8)     [chap] = noop
(8)     [mschap] = noop
(8)     [digest] = noop
(8) suffix: Checking for suffix after "@"
(8) suffix: No '@' in User-Name = "cinnis", looking up realm NULL
(8) suffix: No such realm "NULL"
(8)     [suffix] = noop
(8) eap: Peer sent EAP Response (code 2) ID 42 length 46
(8) eap: Continuing tunnel setup
(8)     [eap] = ok
(8)   } # authorize = ok
(8) Found Auth-Type = eap
(8) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(8)   authenticate {
(8) eap: Expiring EAP session with state 0xacbf8e2dab959723
(8) eap: Finished EAP session with state 0xacbf8e2dab959723
(8) eap: Previous EAP request found for state 0xacbf8e2dab959723, released from the list
(8) eap: Peer sent packet with method EAP PEAP (25)
(8) eap: Calling submodule eap_peap to process data
(8) eap_peap: (TLS) EAP Done initial handshake
(8) eap_peap: Session established.  Decoding tunneled attributes
(8) eap_peap: PEAP state send tlv failure
(8) eap_peap: Received EAP-TLV response
(8) eap_peap:   ERROR: The users session was previously rejected: returning reject (again.)
(8) eap_peap:   This means you need to read the PREVIOUS messages in the debug output
(8) eap_peap:   to find out the reason why the user was rejected
(8) eap_peap:   Look for "reject" or "fail".  Those earlier messages will tell you
(8) eap_peap:   what went wrong, and how to fix the problem
(8) eap: ERROR: Failed continuing EAP PEAP (25) session.  EAP sub-module failed
(8) eap: Sending EAP Failure (code 4) ID 42 length 4
(8) eap: Failed in EAP select
(8)     [eap] = invalid
(8)   } # authenticate = invalid
(8) Failed to authenticate the user
(8) Using Post-Auth-Type Reject
(8) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(8)   Post-Auth-Type REJECT {
(8) attr_filter.access_reject: EXPAND %{User-Name}
(8) attr_filter.access_reject:    --> cinnis
(8) attr_filter.access_reject: Matched entry DEFAULT at line 11
(8)     [attr_filter.access_reject] = updated
(8)     [eap] = noop
(8)     policy remove_reply_message_if_eap {
(8)       if (&reply:EAP-Message && &reply:Reply-Message) {
(8)       if (&reply:EAP-Message && &reply:Reply-Message)  -> FALSE
(8)       else {
(8)         [noop] = noop
(8)       } # else = noop
(8)     } # policy remove_reply_message_if_eap = noop
(8)   } # Post-Auth-Type REJECT = updated
(8) Delaying response for 1.000000 seconds
Waking up in 0.3 seconds.
Waking up in 0.6 seconds.
(8) Sending delayed response
(8) Sent Access-Reject Id 39 from 146.118.55.22:1812 to 202.8.32.153:64998 length 44
(8)   EAP-Message = 0x042a0004
(8)   Message-Authenticator = 0x00000000000000000000000000000000
Waking up in 3.8 seconds.
(0) Cleaning up request packet ID 31 with timestamp +30 due to cleanup_delay was reached
(1) Cleaning up request packet ID 32 with timestamp +30 due to cleanup_delay was reached
(2) Cleaning up request packet ID 33 with timestamp +30 due to cleanup_delay was reached
(3) Cleaning up request packet ID 34 with timestamp +30 due to cleanup_delay was reached
(4) Cleaning up request packet ID 35 with timestamp +30 due to cleanup_delay was reached
(5) Cleaning up request packet ID 36 with timestamp +30 due to cleanup_delay was reached
(6) Cleaning up request packet ID 37 with timestamp +30 due to cleanup_delay was reached
(7) Cleaning up request packet ID 38 with timestamp +30 due to cleanup_delay was reached
(8) Cleaning up request packet ID 39 with timestamp +30 due to cleanup_delay was reached
Ready to process requests

ERROR: FAILED: No NT-Password. Cannot perform authentication

Chevy Innis