Hello, I was hoping to send a few salt-encrypted VSAs to an ERX using FreeRADIUS Version 1.0.4, but I can't find any examples of how to do that. Is it possible, and if so, how? The format of the VSAs is documented on http://www.juniper.net/techpubs/software/erx/junose700/swconfig-broadband/ht... My initial (far fetched) attempt was to modify dictionary.erx like this: VENDOR ERX 4874 BEGIN-VENDOR ERX ATTRIBUTE ERX-Virtual-Router-Name 1 string [..] ATTRIBUTE ERX-LI-Action 58 integer encrypt=1 ATTRIBUTE ERX-Med-Dev-Handle 59 string encrypt=1 ATTRIBUTE ERX-Med-Ip-Address 60 ipaddr encrypt=1 ATTRIBUTE ERX-Med-Port-Number 61 integer encrypt=1 END-VENDOR ERX [..] VALUE ERX-LI-Action off 0 VALUE ERX-LI-Action on 1 VALUE ERX-LI-Action noop 2 I also tried the other documented encrypt-values, with no success. As probably should be expected? The ERX seems to just ignore Access-Accept packets with any of these attributes. They are not even logged as received. Not much help there. Cisco has a bit better documentation with some examples (but not for FreeRADIUS) here: http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122... Does anyone have an idea of how to do this with FreeRADIUS? Bjørn