On 2007-11-11 18:27, Philippe Breton wrote:
On Sun, 2007-11-11 at 17:37 +0100, Krzysztof Olędzki wrote:
On 2007-11-10 17:30, Philippe Breton wrote:
Did you setup your switch properly:
domain (...) vlan-assignment-mode string Hard to give a 100% answer on this question. I believe I did with the help of 3com support. This is the most important part. Please make sure it is set up (display current-configuration).
... I agree with you. The 4500G is new to me. I believe I got it right. One important fact to keep in mind is the semantic is a litle different between the 5500g and 4500G, i.e. what's in this doc does not apply in the 4500G http://www.3com.hu/download/switch_radius_setup.doc/switch_radius_setup.doc
This is my current config:
Please excuse me for the long delay. A day should be longer than 24h. ;)
description VLAN181 # radius scheme system server-type extended primary authentication 127.0.0.1 1645 primary accounting 127.0.0.1 1646 user-name-format without-domain
radius scheme radius1 server-type standard primary authentication 192.168.181.18 key authentication sdfsdfsfsf user-name-format without-domain # domain system access-limit disable state active idle-cut disable self-service-url disable
domain wustl.edu authentication default radius-scheme radius1 access-limit disable state active idle-cut disable self-service-url disable
Please add here: vlan-assignment-mode string accounting optional It is required for 3c5500G, so it should also solve the problem on 3c4500G. If not, please enable radius/mac-authentication/port-security debugging on the switch. Best regards, Krzysztof Olędzki -- Krzysztof Olędzki Axel Springer Polska Sp. z o.o. tel: +48-22-2320969 fax: +48-22-2325530