Hi, i try to install 802.1x enviroment (windows 2000 -> Cisco Switch -> freeradius). The switch only allow auhtentificated clients (windows) to send packets to the intranet. All works well, but all the time freeradius reject because no User-Password, but i insert one in the login screen. System: Freeradius 1.0.4, Windows 2000, Cisco 3550 Log: rad_recv: Access-Request packet from host 192.168.1.3:1812, id=6, length=98 NAS-IP-Address = 192.168.1.3 NAS-Port = 50010 NAS-Port-Type = Ethernet User-Name = "test" Calling-Station-Id = "00-04-75-DA-4C-C8" Service-Type = Framed-User EAP-Message = 0x020100090174657374 Message-Authenticator = 0x05ada6b6c1de489b42a378805df01aac Processing the authorize section of radiusd.conf modcall: entering group authorize for request 1 modcall[authorize]: module "preprocess" returns ok for request 1 modcall[authorize]: module "chap" returns noop for request 1 modcall[authorize]: module "mschap" returns noop for request 1 rlm_realm: No '@' in User-Name = "test", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 1 rlm_eap: EAP packet type response id 1 length 9 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 1 users: Matched entry test at line 54 modcall[authorize]: module "files" returns ok for request 1 modcall: group authorize returns updated for request 1 rad_check_password: Found Auth-Type Local auth: type Local auth: No User-Password or CHAP-Password attribute in the request auth: Failed to validate the user. User Entry: test Auth-Type := Local, User-Passwort == "xxx" Service-Type = Framed-User And i insert the password in the login screen (windows client) Thx for help and hints -- Weitersagen: GMX DSL-Flatrates mit Tempo-Garantie! Ab 4,99 Euro/Monat: http://www.gmx.net/de/go/dsl