Need help setting up FreeRadius using PEAP/MSChapV2

A year ago I tried to set up 802.1x on our network using PEAP/MSChapV2 without any luck, but wanted to try again so here I am. I followed the document titled, "FreeRADIUS Active Directory Integration HOWTO" on the FreeRadius Wiki site and I am still not able to authenicate against AD. I hope someone out there can provide some assistance and HELP me out. I have included the debug out below. Any help would GREATLY be appreciated... [root@mem-co-radius3 raddb]# /usr/local/sbin/radiusd -XA Starting - reading configuration files ... reread_config: reading radiusd.conf Config: including file: /usr/local/etc/raddb/proxy.conf Config: including file: /usr/local/etc/raddb/clients.conf Config: including file: /usr/local/etc/raddb/snmp.conf Config: including file: /usr/local/etc/raddb/eap.conf Config: including file: /usr/local/etc/raddb/sql.conf main: prefix = "/usr/local" main: localstatedir = "/usr/local/var" main: logdir = "/usr/local/var/log/radius" main: libdir = "/usr/local/lib" main: radacctdir = "/usr/local/var/log/radius/radacct" main: hostname_lookups = no main: snmp = no main: max_request_time = 30 main: cleanup_delay = 5 main: max_requests = 1024 main: delete_blocked_requests = 0 main: port = 0 main: allow_core_dumps = no main: log_stripped_names = no main: log_file = "/usr/local/var/log/radius/radius.log" main: log_auth = no main: log_auth_badpass = no main: log_auth_goodpass = no main: pidfile = "/usr/local/var/run/radiusd/radiusd.pid" main: user = "(null)" main: group = "(null)" main: usercollide = no main: lower_user = "no" main: lower_pass = "no" main: nospace_user = "no" main: nospace_pass = "no" main: checkrad = "/usr/local/sbin/checkrad" main: proxy_requests = yes proxy: retry_delay = 5 proxy: retry_count = 3 proxy: synchronous = no proxy: default_fallback = yes proxy: dead_time = 120 proxy: post_proxy_authorize = no proxy: wake_all_if_all_dead = no security: max_attributes = 200 security: reject_delay = 1 security: status_server = no main: debug_level = 0 read_config_files: reading dictionary read_config_files: reading naslist Using deprecated naslist file. Support for this will go away soon. read_config_files: reading clients read_config_files: reading realms radiusd: entering modules setup Module: Library search path is /usr/local/lib Module: Loaded exec exec: wait = yes exec: program = "(null)" exec: input_pairs = "request" exec: output_pairs = "(null)" exec: packet_type = "(null)" rlm_exec: Wait=yes but no output defined. Did you mean output=none? Module: Instantiated exec (exec) Module: Loaded expr Module: Instantiated expr (expr) Module: Loaded PAP pap: encryption_scheme = "crypt" Module: Instantiated pap (pap) Module: Loaded CHAP Module: Instantiated chap (chap) Module: Loaded MS-CHAP mschap: use_mppe = yes mschap: require_encryption = no mschap: require_strong = no mschap: with_ntdomain_hack = yes mschap: passwd = "(null)" mschap: ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key --domain=%{mschap:NT-Domain} --username=%{mschap:User-Name} --challenge=%{mschap:Challenge:-00} --nt-response=%{mschap:NT-Response:-00}" Module: Instantiated mschap (mschap) Module: Loaded System unix: cache = no unix: passwd = "(null)" unix: shadow = "(null)" unix: group = "(null)" unix: radwtmp = "/usr/local/var/log/radius/radwtmp" unix: usegroup = no unix: cache_reload = 600 Module: Instantiated unix (unix) Module: Loaded eap eap: default_eap_type = "peap" eap: timer_expire = 60 eap: ignore_unknown_eap_types = no eap: cisco_accounting_username_bug = no tls: rsa_key_exchange = no tls: dh_key_exchange = yes tls: rsa_key_length = 512 tls: dh_key_length = 512 tls: verify_depth = 0 tls: CA_path = "(null)" tls: pem_file_type = yes tls: private_key_file = "/usr/local/etc/raddb/certs/cert-srv.pem" tls: certificate_file = "/usr/local/etc/raddb/certs/cert-srv.pem" tls: CA_file = "/usr/local/etc/raddb/certs/demoCA/cacert.pem" tls: private_key_password = "whatever" tls: dh_file = "/usr/local/etc/raddb/certs/dh" tls: random_file = "/dev/urandom" tls: fragment_size = 1024 tls: include_length = yes tls: check_crl = no tls: check_cert_cn = "(null)" tls: cipher_list = "(null)" tls: check_cert_issuer = "(null)" rlm_eap_tls: Loading the certificate file as a chain rlm_eap: Loaded and initialized type tls peap: default_eap_type = "mschapv2" peap: copy_request_to_tunnel = no peap: use_tunneled_reply = no peap: proxy_tunneled_request_as_eap = yes rlm_eap: Loaded and initialized type peap mschapv2: with_ntdomain_hack = no rlm_eap: Loaded and initialized type mschapv2 Module: Instantiated eap (eap) Module: Loaded preprocess preprocess: huntgroups = "/usr/local/etc/raddb/huntgroups" preprocess: hints = "/usr/local/etc/raddb/hints" preprocess: with_ascend_hack = no preprocess: ascend_channels_per_line = 23 preprocess: with_ntdomain_hack = no preprocess: with_specialix_jetstream_hack = no preprocess: with_cisco_vsa_hack = no preprocess: with_alvarion_vsa_hack = no Module: Instantiated preprocess (preprocess) Module: Loaded realm realm: format = "suffix" realm: delimiter = "@" realm: ignore_default = no realm: ignore_null = no Module: Instantiated realm (suffix) Module: Loaded files files: usersfile = "/usr/local/etc/raddb/users" files: acctusersfile = "/usr/local/etc/raddb/acct_users" files: preproxy_usersfile = "/usr/local/etc/raddb/preproxy_users" files: compat = "no" Module: Instantiated files (files) Module: Loaded Acct-Unique-Session-Id acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" Module: Instantiated acct_unique (acct_unique) Module: Loaded detail detail: detailfile = "/usr/local/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" detail: detailperm = 384 detail: dirperm = 493 detail: locking = no Module: Instantiated detail (detail) Module: Loaded radutmp radutmp: filename = "/usr/local/var/log/radius/radutmp" radutmp: username = "%{User-Name}" radutmp: case_sensitive = yes radutmp: check_with_nas = yes radutmp: perm = 384 radutmp: callerid = yes Module: Instantiated radutmp (radutmp) Listening on authentication *:1812 Listening on accounting *:1813 Ready to process requests. rad_recv: Access-Request packet from host 172.16.1.243:1645, id=166, length=112 User-Name = "MEM\\rgraham" Service-Type = Framed-User Framed-MTU = 1500 NAS-IP-Address = 172.16.1.243 NAS-Port = 13 Calling-Station-Id = "00-15-58-32-95-BB" EAP-Message = 0x02010010014d454d5c7267726168616d Message-Authenticator = 0x129b48f31fd82471f30cc7fb9f2b16c0 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 0 modcall[authorize]: module "preprocess" returns ok for request 0 modcall[authorize]: module "chap" returns noop for request 0 modcall[authorize]: module "mschap" returns noop for request 0 rlm_realm: No '@' in User-Name = "MEM\rgraham", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 0 rlm_eap: EAP packet type response id 1 length 16 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 0 users: Matched entry DEFAULT at line 152 users: Matched entry DEFAULT at line 171 modcall[authorize]: module "files" returns ok for request 0 modcall: leaving group authorize (returns updated) for request 0 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 0 rlm_eap: EAP Identity rlm_eap: processing type tls rlm_eap_tls: Initiate rlm_eap_tls: Start returned 1 modcall[authenticate]: module "eap" returns handled for request 0 modcall: leaving group authenticate (returns handled) for request 0 Sending Access-Challenge of id 166 to 172.16.1.243 port 1645 Framed-IP-Address = 255.255.255.254 Framed-MTU = 576 Service-Type = Framed-User EAP-Message = 0x010200061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xe5c2ae6e98091f71681bce0ece77b661 Finished request 0 Going to the next request --- Walking the entire request list --- Waking up in 6 seconds... rad_recv: Access-Request packet from host 172.16.1.243:1645, id=167, length=95 User-Name = "0015583295bb" User-Password = "0015583295bb" Service-Type = Framed-User Framed-MTU = 1500 NAS-IP-Address = 172.16.1.243 NAS-Port = 13 Calling-Station-Id = "00-15-58-32-95-BB" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 1 modcall[authorize]: module "preprocess" returns ok for request 1 modcall[authorize]: module "chap" returns noop for request 1 modcall[authorize]: module "mschap" returns noop for request 1 rlm_realm: No '@' in User-Name = "0015583295bb", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 1 rlm_eap: No EAP-Message, not doing EAP modcall[authorize]: module "eap" returns noop for request 1 users: Matched entry DEFAULT at line 152 users: Matched entry DEFAULT at line 171 modcall[authorize]: module "files" returns ok for request 1 modcall: leaving group authorize (returns ok) for request 1 rad_check_password: Found Auth-Type System auth: type "System" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 1 modcall[authenticate]: module "unix" returns notfound for request 1 modcall: leaving group authenticate (returns notfound) for request 1 auth: Failed to validate the user. Delaying request 1 for 1 seconds Finished request 1 Going to the next request Waking up in 6 seconds... rad_recv: Access-Request packet from host 172.16.1.243:1645, id=168, length=236 User-Name = "MEM\\rgraham" Service-Type = Framed-User Framed-MTU = 1500 NAS-IP-Address = 172.16.1.243 NAS-Port = 13 Calling-Station-Id = "00-15-58-32-95-BB" State = 0xe5c2ae6e98091f71681bce0ece77b661 EAP-Message = 0x0202007a198000000070160301006b010000670301454aa65119092ed15cac0bf2dd1cfa4ae4ba44f4f6fb75edb0d148540e065a03000018002f00350005000ac009c00ac013c01400320038001300040100002600000010000e00000b6d656d5c7267726168616d000a00080006001700180019000b00020100 Message-Authenticator = 0xd1271dca6c660ae3adf19b38556b5d25 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 2 modcall[authorize]: module "preprocess" returns ok for request 2 modcall[authorize]: module "chap" returns noop for request 2 modcall[authorize]: module "mschap" returns noop for request 2 rlm_realm: No '@' in User-Name = "MEM\rgraham", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 2 rlm_eap: EAP packet type response id 2 length 122 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 2 users: Matched entry DEFAULT at line 152 users: Matched entry DEFAULT at line 171 modcall[authorize]: module "files" returns ok for request 2 modcall: leaving group authorize (returns updated) for request 2 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 2 rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Length Included eaptls_verify returned 11 (other): before/accept initialization TLS_accept: before/accept initialization rlm_eap_tls: <<< TLS 1.0 Handshake [length 006b], ClientHello TLS_accept: SSLv3 read client hello A rlm_eap_tls: >>> TLS 1.0 Handshake [length 004a], ServerHello TLS_accept: SSLv3 write server hello A rlm_eap_tls: >>> TLS 1.0 Handshake [length 0681], Certificate TLS_accept: SSLv3 write certificate A rlm_eap_tls: >>> TLS 1.0 Handshake [length 0004], ServerHelloDone TLS_accept: SSLv3 write server done A TLS_accept: SSLv3 flush data TLS_accept:error in SSLv3 read client certificate A rlm_eap: SSL error error:00000000:lib(0):func(0):reason(0) In SSL Handshake Phase In SSL Accept mode eaptls_process returned 13 rlm_eap_peap: EAPTLS_HANDLED modcall[authenticate]: module "eap" returns handled for request 2 modcall: leaving group authenticate (returns handled) for request 2 Sending Access-Challenge of id 168 to 172.16.1.243 port 1645 Framed-IP-Address = 255.255.255.254 Framed-MTU = 576 Service-Type = Framed-User EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x656d2d696e732e636f6d301e170d3036313130323233 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x4722dd921ba28f05b6a3ce4dd0c63ff5 Finished request 2 Going to the next request Waking up in 6 seconds... rad_recv: Access-Request packet from host 172.16.1.243:1645, id=169, length=120 User-Name = "MEM\\rgraham" Service-Type = Framed-User Framed-MTU = 1500 NAS-IP-Address = 172.16.1.243 NAS-Port = 13 Calling-Station-Id = "00-15-58-32-95-BB" State = 0x4722dd921ba28f05b6a3ce4dd0c63ff5 EAP-Message = 0x020300061900 Message-Authenticator = 0x2fe4ba89411ecaaf30d4b0fcc21e009c Processing the authorize section of radiusd.conf modcall: entering group authorize for request 3 modcall[authorize]: module "preprocess" returns ok for request 3 modcall[authorize]: module "chap" returns noop for request 3 modcall[authorize]: module "mschap" returns noop for request 3 rlm_realm: No '@' in User-Name = "MEM\rgraham", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 3 rlm_eap: EAP packet type response id 3 length 6 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 3 users: Matched entry DEFAULT at line 152 users: Matched entry DEFAULT at line 171 modcall[authorize]: module "files" returns ok for request 3 modcall: leaving group authorize (returns updated) for request 3 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 3 rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Received EAP-TLS ACK message rlm_eap_tls: ack handshake fragment handler eaptls_verify returned 1 eaptls_process returned 13 rlm_eap_peap: EAPTLS_HANDLED modcall[authenticate]: module "eap" returns handled for request 3 modcall: leaving group authenticate (returns handled) for request 3 Sending Access-Challenge of id 169 to 172.16.1.243 port 1645 Framed-IP-Address = 255.255.255.254 Framed-MTU = 576 Service-Type = Framed-User EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x6c20496e737572616e6365310b3009060355040b130249543123302106092a864886f70d01090116147365637572697479406d656d2d696e732e636f6d820100300c0603551d13040530030101ff300d06092a864886f70d01010405000381810079c9916ca05fde402cf2e85befa2ae87244447523a09a922320183d8694faa74dd7d5addf7164ef96350a24df5da75050a54ea796738036a65be17fcd71521fe61b0f3e69e635f93c24887d88be2fc45c7c4a5dbb9cfb745852c476c7a439ceaf3e1348232bece52c82f453a8ace4319cdc35f41593c22f04acf76515acf898f16030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x8ce86c1c3a38aed8bcb14c9da3a5743f Finished request 3 Going to the next request Waking up in 6 seconds... rad_recv: Access-Request packet from host 172.16.1.243:1645, id=170, length=322 User-Name = "MEM\\rgraham" Service-Type = Framed-User Framed-MTU = 1500 NAS-IP-Address = 172.16.1.243 NAS-Port = 13 Calling-Station-Id = "00-15-58-32-95-BB" State = 0x8ce86c1c3a38aed8bcb14c9da3a5743f EAP-Message = 0x020400d01980000000c61603010086100000820080b77d0443340fa7e3b42f8318960f944f15a0a73271046b0d214a6c34fb25a701ae2c03fd2c21dd496240b1c8238f72a3a527151715148068e72feb05b580156d320cce3657cd8e5ff327981c1ba0021ce8bb23c94243d18d03c083fef43c2928a2d903ee759cc6b97c8be550b65e5c0cadf681e16f40688363093327061599671403010001011603010030cb59268377c2f35bbb5ed04112bb5d080c903154fe75ba0e9353913f943962405da3b30e5931e143ddb32a0715ce32a3 Message-Authenticator = 0x32568f629d463150d30fcdcb1f4a9221 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 4 modcall[authorize]: module "preprocess" returns ok for request 4 modcall[authorize]: module "chap" returns noop for request 4 modcall[authorize]: module "mschap" returns noop for request 4 rlm_realm: No '@' in User-Name = "MEM\rgraham", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 4 rlm_eap: EAP packet type response id 4 length 208 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 4 users: Matched entry DEFAULT at line 152 users: Matched entry DEFAULT at line 171 modcall[authorize]: module "files" returns ok for request 4 modcall: leaving group authorize (returns updated) for request 4 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 4 rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Length Included eaptls_verify returned 11 rlm_eap_tls: <<< TLS 1.0 Handshake [length 0086], ClientKeyExchange TLS_accept: SSLv3 read client key exchange A rlm_eap_tls: <<< TLS 1.0 ChangeCipherSpec [length 0001] rlm_eap_tls: <<< TLS 1.0 Handshake [length 0010], Finished TLS_accept: SSLv3 read finished A rlm_eap_tls: >>> TLS 1.0 ChangeCipherSpec [length 0001] TLS_accept: SSLv3 write change cipher spec A rlm_eap_tls: >>> TLS 1.0 Handshake [length 0010], Finished TLS_accept: SSLv3 write finished A TLS_accept: SSLv3 flush data (other): SSL negotiation finished successfully rlm_eap: SSL error error:00000000:lib(0):func(0):reason(0) SSL Connection Established eaptls_process returned 13 rlm_eap_peap: EAPTLS_HANDLED modcall[authenticate]: module "eap" returns handled for request 4 modcall: leaving group authenticate (returns handled) for request 4 Sending Access-Challenge of id 170 to 172.16.1.243 port 1645 Framed-IP-Address = 255.255.255.254 Framed-MTU = 576 Service-Type = Framed-User EAP-Message = 0x01050041190014030100010116030100304af5b337b3cda8be50cdfb95d5d40e0d5edf65aaf35d6103df543a82b1df2c90676adf32b1277e7837bce039fd169873 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x3fa55aa771536d2480fa32bd3214f790 Finished request 4 Going to the next request Waking up in 6 seconds... rad_recv: Access-Request packet from host 172.16.1.243:1645, id=171, length=120 User-Name = "MEM\\rgraham" Service-Type = Framed-User Framed-MTU = 1500 NAS-IP-Address = 172.16.1.243 NAS-Port = 13 Calling-Station-Id = "00-15-58-32-95-BB" State = 0x3fa55aa771536d2480fa32bd3214f790 EAP-Message = 0x020500061900 Message-Authenticator = 0x5681e2ac70ffdfed2a265d2beeb405de Processing the authorize section of radiusd.conf modcall: entering group authorize for request 5 modcall[authorize]: module "preprocess" returns ok for request 5 modcall[authorize]: module "chap" returns noop for request 5 modcall[authorize]: module "mschap" returns noop for request 5 rlm_realm: No '@' in User-Name = "MEM\rgraham", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 5 rlm_eap: EAP packet type response id 5 length 6 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 5 users: Matched entry DEFAULT at line 152 users: Matched entry DEFAULT at line 171 modcall[authorize]: module "files" returns ok for request 5 modcall: leaving group authorize (returns updated) for request 5 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 5 rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Received EAP-TLS ACK message rlm_eap_tls: ack handshake is finished eaptls_verify returned 3 eaptls_process returned 3 rlm_eap_peap: EAPTLS_SUCCESS modcall[authenticate]: module "eap" returns handled for request 5 modcall: leaving group authenticate (returns handled) for request 5 Sending Access-Challenge of id 171 to 172.16.1.243 port 1645 Framed-IP-Address = 255.255.255.254 Framed-MTU = 576 Service-Type = Framed-User EAP-Message = 0x0106005019001703010020d08cd78b8085bb7e97b9adbe129e47fa17a094ff284ec4df5b954f625a749c1e1703010020e4aaebed0bf703160bb667600586ff0fdc1a75d6264db7a51ffe165cca8e943d Message-Authenticator = 0x00000000000000000000000000000000 State = 0x83dac1e77347d020ee17ac371330f05e Finished request 5 Going to the next request Waking up in 6 seconds... --- Walking the entire request list --- Cleaning up request 0 ID 166 with timestamp 454aa651 Sending Access-Reject of id 167 to 172.16.1.243 port 1645 Cleaning up request 1 ID 167 with timestamp 454aa651 Cleaning up request 2 ID 168 with timestamp 454aa651 Cleaning up request 3 ID 169 with timestamp 454aa651 Cleaning up request 4 ID 170 with timestamp 454aa651 Cleaning up request 5 ID 171 with timestamp 454aa651 Nothing to do. Sleeping until we see a request.