Hum, still not good to read... how can I do it ? good... sorry Can i Join file ? No html should work better ..... pure text... Again, sorry for the 2 previous miss unreadable stuffs! rad_recv: Access-Request packet from host 10.2.103.17 port 59985, id=177, length=173 User-Name = "galaxy\\test" NAS-Identifier = "44d9e7fc21c1" NAS-Port = 0 Called-Station-Id = "46-D9-E7-FD-21-C1:FreeRadius" Calling-Station-Id = "00-1E-65-22-14-C2" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 0Mbps 802.11b" EAP-Message = 0x027300100167616c6178795c74657374 Message-Authenticator = 0x3d46f71089cc7034c3a6636b891a17af # Executing section authorize from file /etc/freeradius/sites-enabled/default +group authorize { ++[preprocess] = ok [ntdomain] Looking up realm "galaxy" for User-Name = "galaxy\test" [ntdomain] Found realm "GALAXY" [ntdomain] Adding Stripped-User-Name = "test" [ntdomain] Adding Realm = "GALAXY" [ntdomain] Authentication realm is LOCAL. ++[ntdomain] = ok [suffix] Request already proxied. Ignoring. ++[suffix] = ok ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] Request already proxied. Ignoring. ++[suffix] = ok [eap] EAP packet type response id 115 length 16 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] = updated ++[files] = noop ++[expiration] = noop ++[logintime] = noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] = noop +} # group authorize = updated Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +group authenticate { [eap] EAP Identity [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] = handled +} # group authenticate = handled Sending Access-Challenge of id 177 to 10.2.103.17 port 59985 EAP-Message = 0x017400061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xf1d729faf1a330fa1233dbe164274a4f Finished request 1. Going to the next request Waking up in 4.9 seconds.