Sorry, 10.1.22.10 is the ip of my 3com. rad_recv: Access-Request packet from host 10.1.22.10:2458, id=0, length=185 Message-Authenticator = 0xb0ba1aec817dfd6ab3fc3b0e49fb1125 Service-Type = Framed-User User-Name = "cjarrett" Framed-MTU = 1488 Called-Station-Id = "00-0F-CB-FC-3E-5F:CJ Test" Calling-Station-Id = "00-0E-35-FF-2A-82" NAS-Identifier = "AP11G" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 54Mbps 802.11g" EAP-Message = 0x0200000d01636a617272657474 NAS-IP-Address = 10.1.22.10 NAS-Port = 2 NAS-Port-Id = "STA port # 2" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 0 modcall[authorize]: module "preprocess" returns ok for request 0 modcall[authorize]: module "chap" returns noop for request 0 modcall[authorize]: module "mschap" returns noop for request 0 rlm_realm: No '@' in User-Name = "cjarrett", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 0 rlm_eap: EAP packet type response id 0 length 13 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 0 users: Matched entry DEFAULT at line 153 users: Matched entry DEFAULT at line 177 modcall[authorize]: module "files" returns ok for request 0 modcall: leaving group authorize (returns updated) for request 0 rad_check_password: Found Auth-Type pam auth: type "PAM" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 0 rlm_pam: Attribute "User-Password" is required for authentication. modcall[authenticate]: module "pam" returns invalid for request 0 modcall: leaving group authenticate (returns invalid) for request 0 auth: Failed to validate the user. Delaying request 0 for 1 seconds Finished request 0 Going to the next request --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Sending Access-Reject of id 0 to 10.1.22.10 port 2458 Waking up in 4 seconds... Kevin Bonner wrote:
On Monday 18 June 2007 16:31:37 Cody Jarrett wrote:
I found a few topics on this issue but nothing quite informative enough. I'm trying to get freeradius auth working with pam and peap. When I test my config with radtest, I get Access-accept. When I use a windows XP supplicant with a 3com access point, I get:
rlm_pam: Attribute "User-Password" is required for authentication. modcall[authenticate]: module "pam" returns invalid for request 4 modcall: leaving group authenticate (returns invalid) for request 4 auth: Failed to validate the user.
Is the 3com not sending User-Password attributes in the packets, or is something else wrong?
Run FreeRADIUS in debug mode (radiusd -X) to verify. We cannot guess what your NAS/client is sending.
-Kevin
------------------------------------------------------------------------
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html