Difficulties trying bind as user to openLDAP

7 Mar 2025

      Hello,
I did try to check on the internet and also found some threads
regarding similar issues that I've tried to use but have been
unsuccessful in resolving my issues.

I'm setting up a freeradius 3.2.1 on a Debian 12 to bring eduroam
service to a high school which is using an OpenLDAP, no microsoft
infrastructure behind other than final clients with their laptops.

Did try multiple configurations to make it work without success.
OpenLDAP has userPassword encrypted in SSHA1 format, which makes it
difficult to be compatible with all available authentication methods.
I was successful on setting it with EAP-TTLS-GTC and as able to
retrieve userPassword and validate MacOS, iOS and Android devices, but
couldn't validate Windows devices without a 3rd party software that
highschool doesn't want to use. EAP-TTLS-PAP was not allowing iOS
devices to validate as they always tried to use mschapv2 with that
configuration.

So now I've been trying to do bind as user against LDAP using
EAP-TTLS-PAP but can't manage to force (Android, iOS and MacOS)
devices to use this configuration to validate and always try to
default to mschapv2. Windows doesn't even try to bind to LDAP.

I can see on the debug log it uses auth-type = eap and calls submodule
eap_ttls which I guess should be correct, but then I see a EAP NAK
that forces to use eap_mschapv2 even though I think I've commented it
to not be used in the configuration.

FreeRADIUS Version 3.2.1
Copyright (C) 1999-2022 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/freeradius/3.0/dictionary
including configuration file /etc/freeradius/3.0/radiusd.conf
including configuration file /etc/freeradius/3.0/proxy.conf
including configuration file /etc/freeradius/3.0/clients.conf
including files in directory /etc/freeradius/3.0/mods-enabled/
including configuration file /etc/freeradius/3.0/mods-enabled/chap
including configuration file /etc/freeradius/3.0/mods-enabled/utf8
including configuration file /etc/freeradius/3.0/mods-enabled/eap
including configuration file /etc/freeradius/3.0/mods-enabled/logintime
including configuration file /etc/freeradius/3.0/mods-enabled/expiration
including configuration file /etc/freeradius/3.0/mods-enabled/realm
including configuration file /etc/freeradius/3.0/mods-enabled/unpack
including configuration file /etc/freeradius/3.0/mods-enabled/pap
including configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clients
including configuration file /etc/freeradius/3.0/mods-enabled/echo
including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp
including configuration file /etc/freeradius/3.0/mods-enabled/files
including configuration file /etc/freeradius/3.0/mods-enabled/exec
including configuration file /etc/freeradius/3.0/mods-enabled/replicate
including configuration file /etc/freeradius/3.0/mods-enabled/expr
including configuration file /etc/freeradius/3.0/mods-enabled/always
including configuration file /etc/freeradius/3.0/mods-enabled/unix
including configuration file /etc/freeradius/3.0/mods-enabled/mschap
including configuration file /etc/freeradius/3.0/mods-enabled/detail
including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth
including configuration file /etc/freeradius/3.0/mods-enabled/linelog
including configuration file /etc/freeradius/3.0/mods-enabled/ldap
including configuration file /etc/freeradius/3.0/mods-enabled/detail.log
including configuration file /etc/freeradius/3.0/mods-enabled/digest
including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter
including configuration file /etc/freeradius/3.0/mods-enabled/passwd
including configuration file /etc/freeradius/3.0/mods-enabled/radutmp
including configuration file /etc/freeradius/3.0/mods-enabled/soh
including configuration file /etc/freeradius/3.0/mods-enabled/preprocess
including files in directory /etc/freeradius/3.0/policy.d/
including configuration file /etc/freeradius/3.0/policy.d/eap
including configuration file /etc/freeradius/3.0/policy.d/abfab-tr
including configuration file /etc/freeradius/3.0/policy.d/canonicalization
including configuration file /etc/freeradius/3.0/policy.d/cui
including configuration file /etc/freeradius/3.0/policy.d/moonshot-targeted-ids
including configuration file /etc/freeradius/3.0/policy.d/accounting
including configuration file /etc/freeradius/3.0/policy.d/control
including configuration file /etc/freeradius/3.0/policy.d/dhcp
including configuration file /etc/freeradius/3.0/policy.d/debug
including configuration file /etc/freeradius/3.0/policy.d/force_pap
including configuration file /etc/freeradius/3.0/policy.d/rfc7542
including configuration file /etc/freeradius/3.0/policy.d/operator-name
including configuration file /etc/freeradius/3.0/policy.d/filter
including files in directory /etc/freeradius/3.0/sites-enabled/
including configuration file /etc/freeradius/3.0/sites-enabled/default
including configuration file /etc/freeradius/3.0/sites-enabled/inner-tunnel
main {
 security {
        user = "freerad"
        group = "freerad"
        allow_core_dumps = no
 }
        name = "freeradius"
        prefix = "/usr"
        localstatedir = "/var"
        logdir = "/var/log/freeradius"
        run_dir = "/var/run/freeradius"
}
main {
        name = "freeradius"
        prefix = "/usr"
        localstatedir = "/var"
        sbindir = "/usr/sbin"
        logdir = "/var/log/freeradius"
        run_dir = "/var/run/freeradius"
        libdir = "/usr/lib/freeradius"
        radacctdir = "/var/log/freeradius/radacct"
        hostname_lookups = no
        max_request_time = 30
        cleanup_delay = 5
        max_requests = 16384
        postauth_client_lost = no
        pidfile = "/var/run/freeradius/freeradius.pid"
        checkrad = "/usr/sbin/checkrad"
        debug_level = 0
        proxy_requests = yes
 log {
        stripped_names = no
        auth = no
        auth_badpass = no
        auth_goodpass = no
        colourise = yes
        msg_denied = "You are already logged in - access denied"
 }
 resources {
 }
 security {
        max_attributes = 200
        reject_delay = 1.000000
        status_server = yes
 }
}
radiusd: #### Loading Realms and Home Servers ####
 proxy server {
        retry_delay = 5
        retry_count = 3
        default_fallback = no
        dead_time = 120
        wake_all_if_all_dead = no
 }
 home_server localhost {
        ipaddr = 127.0.0.1
        port = 1812
        type = "auth"
        secret = <<< secret >>>
        response_window = 20.000000
        response_timeouts = 1
        max_outstanding = 65536
        zombie_period = 40
        status_check = "status-server"
        ping_interval = 30
        check_interval = 30
        check_timeout = 4
        num_answers_to_alive = 3
        revive_interval = 120
  limit {
        max_connections = 16
        max_requests = 0
        lifetime = 0
        idle_timeout = 0
  }
  coa {
        irt = 2
        mrt = 16
        mrc = 5
        mrd = 30
  }
  recv_coa {
  }
 }
 home_server_pool my_auth_failover {
        type = fail-over
        home_server = localhost
 }
 realm example.com {
        auth_pool = my_auth_failover
 }
 realm LOCAL {
 }
 realm ie.edu {
        authhost = LOCAL
 }
 radiusd: #### Loading Clients ####
 client localhost {
        ipaddr = 127.0.0.1
        require_message_authenticator = no
        secret = <<< secret >>>
        nas_type = "other"
        proto = "*"
  limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
  }
 }
 client localhost_ipv6 {
        ipv6addr = ::1
        require_message_authenticator = no
        secret = <<< secret >>>
  limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
  }
 }
 client 10.0.0.209 {
        ipaddr = 10.0.0.209
        require_message_authenticator = no
        secret = <<< secret >>>
        shortname = "radius2"
  limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
  }
 }
 client MiFibraAB01 {
        ipaddr = 10.0.0.0/20
        require_message_authenticator = no
        secret = <<< secret >>>
        shortname = "APsNetwork2"
  limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
  }
 }
Debugger not attached
systemd watchdog is disabled
 # Creating Auth-Type = mschap
 # Creating Auth-Type = digest
 # Creating Auth-Type = eap
 # Creating Auth-Type = PAP
 # Creating Auth-Type = CHAP
 # Creating Auth-Type = MS-CHAP
 # Creating Auth-Type = LDAP
 # Creating Autz-Type = New-TLS-Connection
radiusd: #### Instantiating modules ####
 modules {
  # Loaded module rlm_chap
  # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap
  # Loaded module rlm_utf8
  # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8
  # Loaded module rlm_eap
  # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap
  eap {
        default_eap_type = "ttls"
        timer_expire = 60
        ignore_unknown_eap_types = no
        cisco_accounting_username_bug = no
        max_sessions = 16384
  }
  # Loaded module rlm_logintime
  # Loading module "logintime" from file
/etc/freeradius/3.0/mods-enabled/logintime
  logintime {
        minimum_timeout = 60
  }
  # Loaded module rlm_expiration
  # Loading module "expiration" from file
/etc/freeradius/3.0/mods-enabled/expiration
  # Loaded module rlm_realm
  # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm
  realm IPASS {
        format = "prefix"
        delimiter = "/"
        ignore_default = no
        ignore_null = no
  }
  # Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm
  realm suffix {
        format = "suffix"
        delimiter = "@"
        ignore_default = no
        ignore_null = no
  }
  # Loading module "bangpath" from file /etc/freeradius/3.0/mods-enabled/realm
  realm bangpath {
        format = "prefix"
        delimiter = "!"
        ignore_default = no
        ignore_null = no
  }
  # Loading module "realmpercent" from file
/etc/freeradius/3.0/mods-enabled/realm
  realm realmpercent {
        format = "suffix"
        delimiter = "%"
        ignore_default = no
        ignore_null = no
  }
  # Loading module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm
  realm ntdomain {
        format = "prefix"
        delimiter = "\\"
        ignore_default = no
        ignore_null = no
  }
  # Loaded module rlm_unpack
  # Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack
  # Loaded module rlm_pap
  # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap
  pap {
        normalise = yes
  }
  # Loaded module rlm_dynamic_clients
  # Loading module "dynamic_clients" from file
/etc/freeradius/3.0/mods-enabled/dynamic_clients
  # Loaded module rlm_exec
  # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo
  exec echo {
        wait = yes
        program = "/bin/echo %{User-Name}"
        input_pairs = "request"
        output_pairs = "reply"
        shell_escape = yes
  }
  # Loaded module rlm_radutmp
  # Loading module "sradutmp" from file
/etc/freeradius/3.0/mods-enabled/sradutmp
  radutmp sradutmp {
        filename = "/var/log/freeradius/sradutmp"
        username = "%{User-Name}"
        case_sensitive = yes
        check_with_nas = yes
        permissions = 420
        caller_id = no
  }
  # Loaded module rlm_files
  # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files
  files {
        filename = "/etc/freeradius/3.0/mods-config/files/authorize"
        acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting"
        preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy"
  }
  # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec
  exec {
        wait = no
        input_pairs = "request"
        shell_escape = yes
        timeout = 10
  }
  # Loaded module rlm_replicate
  # Loading module "replicate" from file
/etc/freeradius/3.0/mods-enabled/replicate
  # Loaded module rlm_expr
  # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr
  expr {
        safe_characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
/äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
  }
  # Loaded module rlm_always
  # Loading module "reject" from file /etc/freeradius/3.0/mods-enabled/always
  always reject {
        rcode = "reject"
        simulcount = 0
        mpp = no
  }
  # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always
  always fail {
        rcode = "fail"
        simulcount = 0
        mpp = no
  }
  # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always
  always ok {
        rcode = "ok"
        simulcount = 0
        mpp = no
  }
  # Loading module "handled" from file /etc/freeradius/3.0/mods-enabled/always
  always handled {
        rcode = "handled"
        simulcount = 0
        mpp = no
  }
  # Loading module "invalid" from file /etc/freeradius/3.0/mods-enabled/always
  always invalid {
        rcode = "invalid"
        simulcount = 0
        mpp = no
  }
  # Loading module "userlock" from file /etc/freeradius/3.0/mods-enabled/always
  always userlock {
        rcode = "userlock"
        simulcount = 0
        mpp = no
  }
  # Loading module "notfound" from file /etc/freeradius/3.0/mods-enabled/always
  always notfound {
        rcode = "notfound"
        simulcount = 0
        mpp = no
  }
  # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always
  always noop {
        rcode = "noop"
        simulcount = 0
        mpp = no
  }
  # Loading module "updated" from file /etc/freeradius/3.0/mods-enabled/always
  always updated {
        rcode = "updated"
        simulcount = 0
        mpp = no
  }
  # Loaded module rlm_unix
  # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix
  unix {
        radwtmp = "/var/log/freeradius/radwtmp"
  }
Creating attribute Unix-Group
  # Loaded module rlm_mschap
  # Loading module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap
  mschap {
        use_mppe = yes
        require_encryption = no
        require_strong = no
        with_ntdomain_hack = yes
   passchange {
   }
        allow_retry = yes
        winbind_retry_with_normalised_username = no
  }
  # Loaded module rlm_detail
  # Loading module "detail" from file /etc/freeradius/3.0/mods-enabled/detail
  detail {
        filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loading module "ntlm_auth" from file
/etc/freeradius/3.0/mods-enabled/ntlm_auth
  exec ntlm_auth {
        wait = yes
        program = "/path/to/ntlm_auth --request-nt-key
--domain=MYDOMAIN --username=%{mschap:User-Name}
--password=%{User-Password}"
        shell_escape = yes
  }
  # Loaded module rlm_linelog
  # Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog
  linelog {
        filename = "/var/log/freeradius/linelog"
        escape_filenames = no
        syslog_severity = "info"
        permissions = 384
        format = "This is a log message for %{User-Name}"
        reference = "messages.%{%{reply:Packet-Type}:-default}"
  }
  # Loading module "log_accounting" from file
/etc/freeradius/3.0/mods-enabled/linelog
  linelog log_accounting {
        filename = "/var/log/freeradius/linelog-accounting"
        escape_filenames = no
        syslog_severity = "info"
        permissions = 384
        format = ""
        reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
  }
  # Loaded module rlm_ldap
  # Loading module "ldap" from file /etc/freeradius/3.0/mods-enabled/ldap
  ldap {
        server = "ldaps://ldap.ie.edu:636"
        identity = "cn=freeradius_read,ou=Special Users,dc=ie,dc=edu"
        password = <<< secret >>>
   sasl {
   }
        user_dn = "LDAP-UserDn"
   user {
        scope = "sub"
        access_positive = yes
    sasl {
    }
   }
   group {
        filter = "(objectClass=posixGroup)"
        scope = "sub"
        name_attribute = "cn"
        membership_attribute = "memberOf"
        cacheable_name = no
        cacheable_dn = no
        allow_dangling_group_ref = no
   }
   client {
        filter = "(objectClass=radiusClient)"
        scope = "sub"
        base_dn = "ou=Users,dc=ie,dc=edu"
   }
   profile {
   }
   options {
        ldap_debug = 40
        chase_referrals = yes
        rebind = yes
        net_timeout = 1
        res_timeout = 10
        srv_timelimit = 3
        idle = 60
        probes = 3
        interval = 3
   }
   tls {
        ca_file = "/etc/freeradius/3.0/certs/ca_bundle2023.pem"
        start_tls = no
        require_cert = "demand"
   }
  }
Creating attribute LDAP-Group
  # Loading module "auth_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
  detail auth_log {
        filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loading module "reply_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
  detail reply_log {
        filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loading module "pre_proxy_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
  detail pre_proxy_log {
        filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loading module "post_proxy_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
  detail post_proxy_log {
        filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loaded module rlm_digest
  # Loading module "digest" from file /etc/freeradius/3.0/mods-enabled/digest
  # Loaded module rlm_attr_filter
  # Loading module "attr_filter.post-proxy" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.post-proxy {
        filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy"
        key = "%{Realm}"
        relaxed = no
  }
  # Loading module "attr_filter.pre-proxy" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.pre-proxy {
        filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy"
        key = "%{Realm}"
        relaxed = no
  }
  # Loading module "attr_filter.access_reject" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.access_reject {
        filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject"
        key = "%{User-Name}"
        relaxed = no
  }
  # Loading module "attr_filter.access_challenge" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.access_challenge {
        filename =
"/etc/freeradius/3.0/mods-config/attr_filter/access_challenge"
        key = "%{User-Name}"
        relaxed = no
  }
  # Loading module "attr_filter.accounting_response" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.accounting_response {
        filename =
"/etc/freeradius/3.0/mods-config/attr_filter/accounting_response"
        key = "%{User-Name}"
        relaxed = no
  }
  # Loading module "attr_filter.coa" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.coa {
        filename = "/etc/freeradius/3.0/mods-config/attr_filter/coa"
        key = "%{User-Name}"
        relaxed = no
  }
  # Loaded module rlm_passwd
  # Loading module "etc_passwd" from file
/etc/freeradius/3.0/mods-enabled/passwd
  passwd etc_passwd {
        filename = "/etc/passwd"
        format = "*User-Name:Crypt-Password:"
        delimiter = ":"
        ignore_nislike = no
        ignore_empty = yes
        allow_multiple_keys = no
        hash_size = 100
  }
  # Loading module "radutmp" from file /etc/freeradius/3.0/mods-enabled/radutmp
  radutmp {
        filename = "/var/log/freeradius/radutmp"
        username = "%{User-Name}"
        case_sensitive = yes
        check_with_nas = yes
        permissions = 384
        caller_id = yes
  }
  # Loaded module rlm_soh
  # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh
  soh {
        dhcp = yes
  }
  # Loaded module rlm_preprocess
  # Loading module "preprocess" from file
/etc/freeradius/3.0/mods-enabled/preprocess
  preprocess {
        huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups"
        hints = "/etc/freeradius/3.0/mods-config/preprocess/hints"
        with_ascend_hack = no
        ascend_channels_per_line = 23
        with_ntdomain_hack = no
        with_specialix_jetstream_hack = no
        with_cisco_vsa_hack = no
        with_alvarion_vsa_hack = no
  }
  instantiate {
  }
  # Instantiating module "eap" from file /etc/freeradius/3.0/mods-enabled/eap
   # Linked to sub-module rlm_eap_md5
   # Linked to sub-module rlm_eap_gtc
   gtc {
        challenge = "Password: "
        auth_type = "PAP"
   }
   # Linked to sub-module rlm_eap_tls
   tls {
        tls = "tls-common"
   }
   tls-config tls-common {
        verify_depth = 0
        ca_path = "/etc/freeradius/3.0/certs"
        pem_file_type = yes
        private_key_file = "/etc/ssl/private/ssl-cert-snakeoil.key"
        certificate_file = "/etc/ssl/certs/ssl-cert-snakeoil.pem"
        ca_file = "/etc/ssl/certs/ca-certificates.crt"
        private_key_password = <<< secret >>>
        fragment_size = 1024
        include_length = yes
        auto_chain = yes
        check_crl = no
        check_all_crl = no
        ca_path_reload_interval = 0
        cipher_list = "DEFAULT"
        cipher_server_preference = no
        reject_unknown_intermediate_ca = no
        ecdh_curve = ""
        tls_max_version = "1.2"
        tls_min_version = "1.2"
    cache {
        enable = no
        lifetime = 24
        max_entries = 255
    }
    verify {
        skip_if_ocsp_ok = no
    }
    ocsp {
        enable = no
        override_cert_url = yes
        url = "http://127.0.0.1/ocsp/"
        use_nonce = yes
        timeout = 0
        softfail = no
    }
   }
   # Linked to sub-module rlm_eap_ttls
   ttls {
        tls = "tls-common"
        default_eap_type = "pap"
        copy_request_to_tunnel = yes
        use_tunneled_reply = yes
        virtual_server = "inner-tunnel"
        include_length = yes
        require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_peap
   peap {
        tls = "tls-common"
        default_eap_type = "mschapv2"
        copy_request_to_tunnel = no
        use_tunneled_reply = no
        proxy_tunneled_request_as_eap = yes
        virtual_server = "inner-tunnel"
        soh = no
        require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_mschapv2
   mschapv2 {
        with_ntdomain_hack = no
        send_error = no
   }
  # Instantiating module "logintime" from file
/etc/freeradius/3.0/mods-enabled/logintime
  # Instantiating module "expiration" from file
/etc/freeradius/3.0/mods-enabled/expiration
  # Instantiating module "IPASS" from file
/etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "suffix" from file
/etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "bangpath" from file
/etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "realmpercent" from file
/etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "ntdomain" from file
/etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "pap" from file /etc/freeradius/3.0/mods-enabled/pap
  # Instantiating module "files" from file
/etc/freeradius/3.0/mods-enabled/files
reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize
reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting
reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy
  # Instantiating module "reject" from file
/etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "fail" from file
/etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "ok" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "handled" from file
/etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "invalid" from file
/etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "userlock" from file
/etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "notfound" from file
/etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "noop" from file
/etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "updated" from file
/etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "mschap" from file
/etc/freeradius/3.0/mods-enabled/mschap
rlm_mschap (mschap): using internal authentication
  # Instantiating module "detail" from file
/etc/freeradius/3.0/mods-enabled/detail
  # Instantiating module "linelog" from file
/etc/freeradius/3.0/mods-enabled/linelog
  # Instantiating module "log_accounting" from file
/etc/freeradius/3.0/mods-enabled/linelog
  # Instantiating module "ldap" from file /etc/freeradius/3.0/mods-enabled/ldap
rlm_ldap: libldap vendor: OpenLDAP, version: 20513
   accounting {
        reference = "%{tolower:type.%{Acct-Status-Type}}"
   }
   post-auth {
        reference = "."
   }
rlm_ldap (ldap): Initialising connection pool
   pool {
        start = 5
        min = 3
        max = 32
        spare = 10
        uses = 0
        lifetime = 0
        cleanup_interval = 30
        idle_timeout = 60
        retry_delay = 30
        spread = no
   }
rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots used
rlm_ldap (ldap): Connecting to ldaps://ldap.ie.edu:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots used
rlm_ldap (ldap): Connecting to ldaps://ldap.ie.edu:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots used
rlm_ldap (ldap): Connecting to ldaps://ldap.ie.edu:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots used
rlm_ldap (ldap): Connecting to ldaps://ldap.ie.edu:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots used
rlm_ldap (ldap): Connecting to ldaps://ldap.ie.edu:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
  # Instantiating module "auth_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
detail output
  # Instantiating module "reply_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
  # Instantiating module "pre_proxy_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
  # Instantiating module "post_proxy_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
  # Instantiating module "attr_filter.post-proxy" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy
  # Instantiating module "attr_filter.pre-proxy" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy
  # Instantiating module "attr_filter.access_reject" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_reject
  # Instantiating module "attr_filter.access_challenge" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file
/etc/freeradius/3.0/mods-config/attr_filter/access_challenge
  # Instantiating module "attr_filter.accounting_response" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file
/etc/freeradius/3.0/mods-config/attr_filter/accounting_response
  # Instantiating module "attr_filter.coa" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/coa
  # Instantiating module "etc_passwd" from file
/etc/freeradius/3.0/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
  # Instantiating module "preprocess" from file
/etc/freeradius/3.0/mods-enabled/preprocess
reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups
reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints
 } # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/freeradius/3.0/radiusd.conf
} # server
server default { # from file /etc/freeradius/3.0/sites-enabled/default
 # Loading authenticate {...}
Compiling Auth-Type PAP for attr Auth-Type
Compiling Auth-Type CHAP for attr Auth-Type
Compiling Auth-Type MS-CHAP for attr Auth-Type
Compiling Auth-Type LDAP for attr Auth-Type
 # Loading authorize {...}
Ignoring "sql" (see raddb/mods-available/README.rst)
Compiling Autz-Type New-TLS-Connection for attr Autz-Type
 # Loading preacct {...}
 # Loading accounting {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
Compiling Post-Auth-Type REJECT for attr Post-Auth-Type
Compiling Post-Auth-Type Challenge for attr Post-Auth-Type
Compiling Post-Auth-Type Client-Lost for attr Post-Auth-Type
} # server default
server inner-tunnel { # from file /etc/freeradius/3.0/sites-enabled/inner-tunnel
 # Loading authenticate {...}
Compiling Auth-Type PAP for attr Auth-Type
Compiling Auth-Type LDAP for attr Auth-Type
 # Loading authorize {...}
 # Loading session {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
 # Skipping contents of 'if' as it is always 'false' --
/etc/freeradius/3.0/sites-enabled/inner-tunnel:345
Compiling Post-Auth-Type REJECT for attr Post-Auth-Type
} # server inner-tunnel
radiusd: #### Opening IP addresses and Ports ####
listen {
        type = "auth"
        ipaddr = *
        port = 0
   limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
   }
}
listen {
        type = "acct"
        ipaddr = *
        port = 0
   limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
   }
}
listen {
        type = "auth"
        ipv6addr = ::
        port = 0
   limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
   }
}
listen {
        type = "acct"
        ipv6addr = ::
        port = 0
   limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
   }
}
listen {
        type = "auth"
        ipaddr = 127.0.0.1
        port = 18120
}
Listening on auth address * port 1812 bound to server default
Listening on acct address * port 1813 bound to server default
Listening on auth address :: port 1812 bound to server default
Listening on acct address :: port 1813 bound to server default
Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
Listening on proxy address * port 44386
Listening on proxy address :: port 52350
Ready to process requests
(0) Received Access-Request Id 91 from 10.0.8.4:61706 to
10.0.0.209:1812 length 386
(0)   User-Name = "eduroam@ie.edu"
(0)   NAS-Port = 500
(0)   Service-Type = Framed-User
(0)   Framed-Protocol = PPP
(0)   Calling-Station-Id = "163f-2583-85bf"
(0)   NAS-Identifier = "controller1"
(0)   NAS-Port-Type = Wireless-802.11
(0)   NAS-Port-Id = "slot=0;subslot=0;port=0;vlanid=500"
(0)   EAP-Message =
0x02af001e01656475726f616d2e7465737440657363692e7570662e656475
(0)   Message-Authenticator = 0x4fd7146d941f5d5411803ee18d774dfc
(0)   Called-Station-Id = "00-06-F4-B0-96-F0:MiFibra-AB01"
(0)   NAS-IP-Address = 10.0.8.4
(0)   Framed-MTU = 1500
(0)   Acct-Session-Id = "control0000000000050094df6a010035b"
(0)   WLAN-Pairwise-Cipher = 0
(0)   WLAN-Group-Cipher = 0
(0)   WLAN-AKM-Suite = 0
(0)   WLAN-Group-Mgmt-Cipher = 0
(0)   Huawei-Startup-Stamp = 1648044398
(0)   Huawei-IPHost-Addr = "255.255.255.255 16:3f:25:83:85:bf"
(0)   Huawei-Connect-ID = 4955
(0)   Huawei-Version = "Huawei AC6005-8"
(0)   Huawei-Product-ID = "AC"
(0)   Huawei-Loopback-Address = "0006-F4B0-96F0"
(0)   Huawei-User-Mac = "\000\000\000\001"
(0) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(0)   authorize {
(0)     policy filter_username {
(0)       if (&User-Name) {
(0)       if (&User-Name)  -> TRUE
(0)       if (&User-Name)  {
(0)         if (&User-Name =~ / /) {
(0)         if (&User-Name =~ / /)  -> FALSE
(0)         if (&User-Name =~ /@[^@]*@/ ) {
(0)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(0)         if (&User-Name =~ /\.\./ ) {
(0)         if (&User-Name =~ /\.\./ )  -> FALSE
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
  -> FALSE
(0)         if (&User-Name =~ /\.$/)  {
(0)         if (&User-Name =~ /\.$/)   -> FALSE
(0)         if (&User-Name =~ /@\./)  {
(0)         if (&User-Name =~ /@\./)   -> FALSE
(0)       } # if (&User-Name)  = notfound
(0)     } # policy filter_username = notfound
(0)     [preprocess] = ok
(0)     [digest] = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: Looking up realm "ie.edu" for User-Name = "eduroam@ie.edu"
(0) suffix: Found realm "ie.edu"
(0) suffix: Adding Stripped-User-Name = "eduroam"
(0) suffix: Adding Realm = "ie.edu"
(0) suffix: Authentication realm is LOCAL
(0)     [suffix] = ok
(0) eap: Peer sent EAP Response (code 2) ID 175 length 30
(0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit
the rest of authorize
(0)     [eap] = ok
(0)   } # authorize = ok
(0) Found Auth-Type = eap
(0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(0)   authenticate {
(0) eap: Peer sent packet with method EAP Identity (1)
(0) eap: Calling submodule eap_ttls to process data
(0) eap_ttls: (TLS) Initiating new session
(0) eap: Sending EAP Request (code 1) ID 176 length 6
(0) eap: EAP session adding &reply:State = 0x83ceeacb837effc5
(0)     [eap] = handled
(0)   } # authenticate = handled
(0) Using Post-Auth-Type Challenge
(0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(0)   Challenge { ... } # empty sub-section is ignored
(0) session-state: Saving cached attributes
(0)   Framed-MTU = 994
(0) Sent Access-Challenge Id 91 from 10.0.0.209:1812 to 10.0.8.4:61706 length 64
(0)   EAP-Message = 0x01b000061520
(0)   Message-Authenticator = 0x00000000000000000000000000000000
(0)   State = 0x83ceeacb837effc5a7029ef06b10891f
(0) Finished request
Waking up in 4.9 seconds.
(1) Received Access-Request Id 92 from 10.0.8.4:61706 to
10.0.0.209:1812 length 541
(1)   User-Name = "eduroam@ie.edu"
(1)   NAS-Port = 500
(1)   Service-Type = Framed-User
(1)   Framed-Protocol = PPP
(1)   Calling-Station-Id = "163f-2583-85bf"
(1)   NAS-Identifier = "controller1"
(1)   NAS-Port-Type = Wireless-802.11
(1)   NAS-Port-Id = "slot=0;subslot=0;port=0;vlanid=500"
(1)   State = 0x83ceeacb837effc5a7029ef06b10891f
(1)   EAP-Message =
0x02b000a115800000009716030100920100008e030367caee0a4266212875f7c38f3428ece36f692c5be6d3248ebe57286d44d3446600002c00ffc02cc02bc024c023c00ac009c008c030c02fc028c027c014c013c012009d009c003d003c0035002f000a01000039000a00080006001700180019000b00020100000d00120010040102010501060104030203050306030005000501000000000012000000170000
(1)   Message-Authenticator = 0x546749c048c7c8de56c983ae232d246e
(1)   Called-Station-Id = "00-06-F4-B0-96-F0:MiFibra-AB01"
(1)   Login-IP-Host = 0.0.0.0
(1)   NAS-IP-Address = 10.0.8.4
(1)   Framed-MTU = 1500
(1)   Acct-Session-Id = "control0000000000050094df6a010035b"
(1)   WLAN-Pairwise-Cipher = 0
(1)   WLAN-Group-Cipher = 0
(1)   WLAN-AKM-Suite = 0
(1)   WLAN-Group-Mgmt-Cipher = 0
(1)   Huawei-Startup-Stamp = 1648044398
(1)   Huawei-IPHost-Addr = "255.255.255.255 16:3f:25:83:85:bf"
(1)   Huawei-Connect-ID = 4955
(1)   Huawei-Version = "Huawei AC6005-8"
(1)   Huawei-Product-ID = "AC"
(1)   Huawei-Loopback-Address = "0006-F4B0-96F0"
(1)   Huawei-User-Mac = "\000\000\000\001"
(1) Restoring &session-state
(1)   &session-state:Framed-MTU = 994
(1) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(1)   authorize {
(1)     policy filter_username {
(1)       if (&User-Name) {
(1)       if (&User-Name)  -> TRUE
(1)       if (&User-Name)  {
(1)         if (&User-Name =~ / /) {
(1)         if (&User-Name =~ / /)  -> FALSE
(1)         if (&User-Name =~ /@[^@]*@/ ) {
(1)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(1)         if (&User-Name =~ /\.\./ ) {
(1)         if (&User-Name =~ /\.\./ )  -> FALSE
(1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
  -> FALSE
(1)         if (&User-Name =~ /\.$/)  {
(1)         if (&User-Name =~ /\.$/)   -> FALSE
(1)         if (&User-Name =~ /@\./)  {
(1)         if (&User-Name =~ /@\./)   -> FALSE
(1)       } # if (&User-Name)  = notfound
(1)     } # policy filter_username = notfound
(1)     [preprocess] = ok
(1)     [digest] = noop
(1) suffix: Checking for suffix after "@"
(1) suffix: Looking up realm "ie.edu" for User-Name = "eduroam@ie.edu"
(1) suffix: Found realm "ie.edu"
(1) suffix: Adding Stripped-User-Name = "eduroam"
(1) suffix: Adding Realm = "ie.edu"
(1) suffix: Authentication realm is LOCAL
(1)     [suffix] = ok
(1) eap: Peer sent EAP Response (code 2) ID 176 length 161
(1) eap: Continuing tunnel setup
(1)     [eap] = ok
(1)   } # authorize = ok
(1) Found Auth-Type = eap
(1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(1)   authenticate {
(1) eap: Expiring EAP session with state 0x83ceeacb837effc5
(1) eap: Finished EAP session with state 0x83ceeacb837effc5
(1) eap: Previous EAP request found for state 0x83ceeacb837effc5,
released from the list
(1) eap: Peer sent packet with method EAP TTLS (21)
(1) eap: Calling submodule eap_ttls to process data
(1) eap_ttls: Authenticate
(1) eap_ttls: (TLS) EAP Peer says that the final record size will be 151 bytes
(1) eap_ttls: (TLS) EAP Got all data (151 bytes)
(1) eap_ttls: (TLS) Handshake state - before SSL initialization
(1) eap_ttls: (TLS) Handshake state - Server before SSL initialization
(1) eap_ttls: (TLS) Handshake state - Server before SSL initialization
(1) eap_ttls: (TLS) recv TLS 1.3 Handshake, ClientHello
(1) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS read client hello
(1) eap_ttls: (TLS) send TLS 1.2 Handshake, ServerHello
(1) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS write server hello
(1) eap_ttls: (TLS) send TLS 1.2 Handshake, Certificate
(1) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS write certificate
(1) eap_ttls: (TLS) send TLS 1.2 Handshake, ServerKeyExchange
(1) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS write key exchange
(1) eap_ttls: (TLS) send TLS 1.2 Handshake, ServerHelloDone
(1) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS write server done
(1) eap_ttls: (TLS) Server : Need to read more data: SSLv3/TLS write server done
(1) eap_ttls: (TLS) In Handshake Phase
(1) eap: Sending EAP Request (code 1) ID 177 length 1004
(1) eap: EAP session adding &reply:State = 0x83ceeacb827fffc5
(1)     [eap] = handled
(1)   } # authenticate = handled
(1) Using Post-Auth-Type Challenge
(1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(1)   Challenge { ... } # empty sub-section is ignored
(1) session-state: Saving cached attributes
(1)   Framed-MTU = 994
(1)   TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello"
(1)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello"
(1)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate"
(1)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake,
ServerKeyExchange"
(1)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone"
(1) Sent Access-Challenge Id 92 from 10.0.0.209:1812 to 10.0.8.4:61706
length 1068
(1)   EAP-Message =
0x01b103ec15c0000004c9160303003d020000390303b80f5e96c2615beb417ed13d28540f0390cb6867bba43d4405feb5c0cc1f155600c030000011ff01000100000b0004030001020017000016030303270b00032300032000031d3082031930820201a00302010202146bd2dd71540e46b77d1eb9fc0c67fab3498683fe300d06092a864886f70d01010b0500301f311d301b06035504030c14726164697573322e657363692e7570662e656475301e170d3235303131343134323333335a170d3335303131323134323333335a301f311d301b06035504030c14726164697573322e657363692e7570662e65647530820122300d06092a864886f70d01010105000382010f003082010a0282010100de88822de9138e50591c54426d0599b1cb11cd36f7cff249f8dbec613db8e6b3168def676a73ed6a076649d4aa89b06f1c7724d0de34221011137adf3b269617632d537d24ae2bf34fbd7c8b7bcdaa9dba25a521f95bdb8a08a73ee53118c9ad401e89d44c6869
(1)   Message-Authenticator = 0x00000000000000000000000000000000
(1)   State = 0x83ceeacb827fffc5a7029ef06b10891f
(1) Finished request
Waking up in 4.9 seconds.
(2) Received Access-Request Id 93 from 10.0.8.4:61706 to
10.0.0.209:1812 length 386
(2)   User-Name = "eduroam@ie.edu"
(2)   NAS-Port = 500
(2)   Service-Type = Framed-User
(2)   Framed-Protocol = PPP
(2)   Calling-Station-Id = "163f-2583-85bf"
(2)   NAS-Identifier = "controller1"
(2)   NAS-Port-Type = Wireless-802.11
(2)   NAS-Port-Id = "slot=0;subslot=0;port=0;vlanid=500"
(2)   State = 0x83ceeacb827fffc5a7029ef06b10891f
(2)   EAP-Message = 0x02b100061500
(2)   Message-Authenticator = 0xd9ad187958da266a5e8c542f6c5ca5c1
(2)   Called-Station-Id = "00-06-F4-B0-96-F0:MiFibra-AB01"
(2)   Login-IP-Host = 0.0.0.0
(2)   NAS-IP-Address = 10.0.8.4
(2)   Framed-MTU = 1500
(2)   Acct-Session-Id = "control0000000000050094df6a010035b"
(2)   WLAN-Pairwise-Cipher = 0
(2)   WLAN-Group-Cipher = 0
(2)   WLAN-AKM-Suite = 0
(2)   WLAN-Group-Mgmt-Cipher = 0
(2)   Huawei-Startup-Stamp = 1648044398
(2)   Huawei-IPHost-Addr = "255.255.255.255 16:3f:25:83:85:bf"
(2)   Huawei-Connect-ID = 4955
(2)   Huawei-Version = "Huawei AC6005-8"
(2)   Huawei-Product-ID = "AC"
(2)   Huawei-Loopback-Address = "0006-F4B0-96F0"
(2)   Huawei-User-Mac = "\000\000\000\001"
(2) Restoring &session-state
(2)   &session-state:Framed-MTU = 994
(2)   &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3
Handshake, ClientHello"
(2)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, ServerHello"
(2)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, Certificate"
(2)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, ServerKeyExchange"
(2)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, ServerHelloDone"
(2) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(2)   authorize {
(2)     policy filter_username {
(2)       if (&User-Name) {
(2)       if (&User-Name)  -> TRUE
(2)       if (&User-Name)  {
(2)         if (&User-Name =~ / /) {
(2)         if (&User-Name =~ / /)  -> FALSE
(2)         if (&User-Name =~ /@[^@]*@/ ) {
(2)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(2)         if (&User-Name =~ /\.\./ ) {
(2)         if (&User-Name =~ /\.\./ )  -> FALSE
(2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
  -> FALSE
(2)         if (&User-Name =~ /\.$/)  {
(2)         if (&User-Name =~ /\.$/)   -> FALSE
(2)         if (&User-Name =~ /@\./)  {
(2)         if (&User-Name =~ /@\./)   -> FALSE
(2)       } # if (&User-Name)  = notfound
(2)     } # policy filter_username = notfound
(2)     [preprocess] = ok
(2)     [digest] = noop
(2) suffix: Checking for suffix after "@"
(2) suffix: Looking up realm "ie.edu" for User-Name = "eduroam@ie.edu"
(2) suffix: Found realm "ie.edu"
(2) suffix: Adding Stripped-User-Name = "eduroam"
(2) suffix: Adding Realm = "ie.edu"
(2) suffix: Authentication realm is LOCAL
(2)     [suffix] = ok
(2) eap: Peer sent EAP Response (code 2) ID 177 length 6
(2) eap: Continuing tunnel setup
(2)     [eap] = ok
(2)   } # authorize = ok
(2) Found Auth-Type = eap
(2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(2)   authenticate {
(2) eap: Expiring EAP session with state 0x83ceeacb827fffc5
(2) eap: Finished EAP session with state 0x83ceeacb827fffc5
(2) eap: Previous EAP request found for state 0x83ceeacb827fffc5,
released from the list
(2) eap: Peer sent packet with method EAP TTLS (21)
(2) eap: Calling submodule eap_ttls to process data
(2) eap_ttls: Authenticate
(2) eap_ttls: (TLS) Peer ACKed our handshake fragment
(2) eap: Sending EAP Request (code 1) ID 178 length 241
(2) eap: EAP session adding &reply:State = 0x83ceeacb817cffc5
(2)     [eap] = handled
(2)   } # authenticate = handled
(2) Using Post-Auth-Type Challenge
(2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(2)   Challenge { ... } # empty sub-section is ignored
(2) session-state: Saving cached attributes
(2)   Framed-MTU = 994
(2)   TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello"
(2)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello"
(2)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate"
(2)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake,
ServerKeyExchange"
(2)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone"
(2) Sent Access-Challenge Id 93 from 10.0.0.209:1812 to 10.0.8.4:61706
length 299
(2)   EAP-Message =
0x01b200f11580000004c91758e8bab4ea88db791430ebf132ba7944c9b097d2df9eec6738fbbe4d544ea9082d59c2b1161df428dee0ab62765e093945c909de42fdee283b6f5656548f9dcbce73f42464ae2ebb7e0a59b5551cf2811534c381fd55f08ae62a3875c6f448d5ab543bdc22a19636d9b6c48f80e576592e278d8adfcdfeb69f22fe49abcb6a5140d472030c6b6d29c05c9589152eb1a17742acce8012f4e251495b29a229c87b8144085312eb6b76c72bca177d58e3585549e5c2d8979211ac1eb2c1e17de801da1bd0fb76c65b28acbea8f0872445ce8371e57c0a79f66bce27868c6216030300040e000000
(2)   Message-Authenticator = 0x00000000000000000000000000000000
(2)   State = 0x83ceeacb817cffc5a7029ef06b10891f
(2) Finished request
Waking up in 4.9 seconds.
(3) Received Access-Request Id 94 from 10.0.8.4:61706 to
10.0.0.209:1812 length 516
(3)   User-Name = "eduroam@ie.edu"
(3)   NAS-Port = 500
(3)   Service-Type = Framed-User
(3)   Framed-Protocol = PPP
(3)   Calling-Station-Id = "163f-2583-85bf"
(3)   NAS-Identifier = "controller1"
(3)   NAS-Port-Type = Wireless-802.11
(3)   NAS-Port-Id = "slot=0;subslot=0;port=0;vlanid=500"
(3)   State = 0x83ceeacb817cffc5a7029ef06b10891f
(3)   EAP-Message =
0x02b2008815800000007e16030300461000004241046bb9bf48b33ca5b7774d6f3bae8bf37284d42a0738d0c475f120ec34095c698cd9741bd3370ca7c39dbb760454b0a81cd5b406089daca4c8fc0d002ebdddd4f314030300010116030300287d4d14d321bdde353da05c5fffbbbfd20eb41341c1c31f49d1b62265cc0c7880fea8727a1ea8a064
(3)   Message-Authenticator = 0x5d92bc3611f520a5400c2c6874da2f0f
(3)   Called-Station-Id = "00-06-F4-B0-96-F0:MiFibra-AB01"
(3)   Login-IP-Host = 0.0.0.0
(3)   NAS-IP-Address = 10.0.8.4
(3)   Framed-MTU = 1500
(3)   Acct-Session-Id = "control0000000000050094df6a010035b"
(3)   WLAN-Pairwise-Cipher = 0
(3)   WLAN-Group-Cipher = 0
(3)   WLAN-AKM-Suite = 0
(3)   WLAN-Group-Mgmt-Cipher = 0
(3)   Huawei-Startup-Stamp = 1648044398
(3)   Huawei-IPHost-Addr = "255.255.255.255 16:3f:25:83:85:bf"
(3)   Huawei-Connect-ID = 4955
(3)   Huawei-Version = "Huawei AC6005-8"
(3)   Huawei-Product-ID = "AC"
(3)   Huawei-Loopback-Address = "0006-F4B0-96F0"
(3)   Huawei-User-Mac = "\000\000\000\001"
(3) Restoring &session-state
(3)   &session-state:Framed-MTU = 994
(3)   &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3
Handshake, ClientHello"
(3)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, ServerHello"
(3)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, Certificate"
(3)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, ServerKeyExchange"
(3)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, ServerHelloDone"
(3) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(3)   authorize {
(3)     policy filter_username {
(3)       if (&User-Name) {
(3)       if (&User-Name)  -> TRUE
(3)       if (&User-Name)  {
(3)         if (&User-Name =~ / /) {
(3)         if (&User-Name =~ / /)  -> FALSE
(3)         if (&User-Name =~ /@[^@]*@/ ) {
(3)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(3)         if (&User-Name =~ /\.\./ ) {
(3)         if (&User-Name =~ /\.\./ )  -> FALSE
(3)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(3)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
  -> FALSE
(3)         if (&User-Name =~ /\.$/)  {
(3)         if (&User-Name =~ /\.$/)   -> FALSE
(3)         if (&User-Name =~ /@\./)  {
(3)         if (&User-Name =~ /@\./)   -> FALSE
(3)       } # if (&User-Name)  = notfound
(3)     } # policy filter_username = notfound
(3)     [preprocess] = ok
(3)     [digest] = noop
(3) suffix: Checking for suffix after "@"
(3) suffix: Looking up realm "ie.edu" for User-Name = "eduroam@ie.edu"
(3) suffix: Found realm "ie.edu"
(3) suffix: Adding Stripped-User-Name = "eduroam"
(3) suffix: Adding Realm = "ie.edu"
(3) suffix: Authentication realm is LOCAL
(3)     [suffix] = ok
(3) eap: Peer sent EAP Response (code 2) ID 178 length 136
(3) eap: Continuing tunnel setup
(3)     [eap] = ok
(3)   } # authorize = ok
(3) Found Auth-Type = eap
(3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(3)   authenticate {
(3) eap: Expiring EAP session with state 0x83ceeacb817cffc5
(3) eap: Finished EAP session with state 0x83ceeacb817cffc5
(3) eap: Previous EAP request found for state 0x83ceeacb817cffc5,
released from the list
(3) eap: Peer sent packet with method EAP TTLS (21)
(3) eap: Calling submodule eap_ttls to process data
(3) eap_ttls: Authenticate
(3) eap_ttls: (TLS) EAP Peer says that the final record size will be 126 bytes
(3) eap_ttls: (TLS) EAP Got all data (126 bytes)
(3) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS write server done
(3) eap_ttls: (TLS) recv TLS 1.2 Handshake, ClientKeyExchange
(3) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS read client key exchange
(3) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS read change cipher spec
(3) eap_ttls: (TLS) recv TLS 1.2 Handshake, Finished
(3) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS read finished
(3) eap_ttls: (TLS) send TLS 1.2 ChangeCipherSpec
(3) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS write change cipher spec
(3) eap_ttls: (TLS) send TLS 1.2 Handshake, Finished
(3) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS write finished
(3) eap_ttls: (TLS) Handshake state - SSL negotiation finished successfully
(3) eap_ttls: (TLS) Connection Established
(3) eap_ttls:   TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"
(3) eap_ttls:   TLS-Session-Version = "TLS 1.2"
(3) eap: Sending EAP Request (code 1) ID 179 length 61
(3) eap: EAP session adding &reply:State = 0x83ceeacb807dffc5
(3)     [eap] = handled
(3)   } # authenticate = handled
(3) Using Post-Auth-Type Challenge
(3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(3)   Challenge { ... } # empty sub-section is ignored
(3) session-state: Saving cached attributes
(3)   Framed-MTU = 994
(3)   TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello"
(3)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello"
(3)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate"
(3)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake,
ServerKeyExchange"
(3)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone"
(3)   TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake,
ClientKeyExchange"
(3)   TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished"
(3)   TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec"
(3)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished"
(3)   TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"
(3)   TLS-Session-Version = "TLS 1.2"
(3) Sent Access-Challenge Id 94 from 10.0.0.209:1812 to 10.0.8.4:61706
length 119
(3)   EAP-Message =
0x01b3003d158000000033140303000101160303002887896bbb5b418377007a61b1308e7b3f44cf028c7cb553442e3c54996b0d95a69eba081afa05664d
(3)   Message-Authenticator = 0x00000000000000000000000000000000
(3)   State = 0x83ceeacb807dffc5a7029ef06b10891f
(3) Finished request
Waking up in 4.8 seconds.
(4) Received Access-Request Id 95 from 10.0.8.4:61706 to
10.0.0.209:1812 length 459
(4)   User-Name = "eduroam@ie.edu"
(4)   NAS-Port = 500
(4)   Service-Type = Framed-User
(4)   Framed-Protocol = PPP
(4)   Calling-Station-Id = "163f-2583-85bf"
(4)   NAS-Identifier = "controller1"
(4)   NAS-Port-Type = Wireless-802.11
(4)   NAS-Port-Id = "slot=0;subslot=0;port=0;vlanid=500"
(4)   State = 0x83ceeacb807dffc5a7029ef06b10891f
(4)   EAP-Message =
0x02b3004f15800000004517030300407d4d14d321bdde36253a10334b98fd2a3f5130f71511444b5f57025f182c628c9ef3ec3bcb26d65d8ffce2f2bbfe961f74a2065564e7fdde54dd83c95cb6e78f
(4)   Message-Authenticator = 0x57e3562480164f05e28f781e3ba18b10
(4)   Called-Station-Id = "00-06-F4-B0-96-F0:MiFibra-AB01"
(4)   Login-IP-Host = 0.0.0.0
(4)   NAS-IP-Address = 10.0.8.4
(4)   Framed-MTU = 1500
(4)   Acct-Session-Id = "control0000000000050094df6a010035b"
(4)   WLAN-Pairwise-Cipher = 0
(4)   WLAN-Group-Cipher = 0
(4)   WLAN-AKM-Suite = 0
(4)   WLAN-Group-Mgmt-Cipher = 0
(4)   Huawei-Startup-Stamp = 1648044398
(4)   Huawei-IPHost-Addr = "255.255.255.255 16:3f:25:83:85:bf"
(4)   Huawei-Connect-ID = 4955
(4)   Huawei-Version = "Huawei AC6005-8"
(4)   Huawei-Product-ID = "AC"
(4)   Huawei-Loopback-Address = "0006-F4B0-96F0"
(4)   Huawei-User-Mac = "\000\000\000\001"
(4) Restoring &session-state
(4)   &session-state:Framed-MTU = 994
(4)   &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3
Handshake, ClientHello"
(4)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, ServerHello"
(4)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, Certificate"
(4)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, ServerKeyExchange"
(4)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, ServerHelloDone"
(4)   &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2
Handshake, ClientKeyExchange"
(4)   &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2
Handshake, Finished"
(4)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
ChangeCipherSpec"
(4)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, Finished"
(4)   &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"
(4)   &session-state:TLS-Session-Version = "TLS 1.2"
(4) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(4)   authorize {
(4)     policy filter_username {
(4)       if (&User-Name) {
(4)       if (&User-Name)  -> TRUE
(4)       if (&User-Name)  {
(4)         if (&User-Name =~ / /) {
(4)         if (&User-Name =~ / /)  -> FALSE
(4)         if (&User-Name =~ /@[^@]*@/ ) {
(4)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(4)         if (&User-Name =~ /\.\./ ) {
(4)         if (&User-Name =~ /\.\./ )  -> FALSE
(4)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(4)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
  -> FALSE
(4)         if (&User-Name =~ /\.$/)  {
(4)         if (&User-Name =~ /\.$/)   -> FALSE
(4)         if (&User-Name =~ /@\./)  {
(4)         if (&User-Name =~ /@\./)   -> FALSE
(4)       } # if (&User-Name)  = notfound
(4)     } # policy filter_username = notfound
(4)     [preprocess] = ok
(4)     [digest] = noop
(4) suffix: Checking for suffix after "@"
(4) suffix: Looking up realm "ie.edu" for User-Name = "eduroam@ie.edu"
(4) suffix: Found realm "ie.edu"
(4) suffix: Adding Stripped-User-Name = "eduroam"
(4) suffix: Adding Realm = "ie.edu"
(4) suffix: Authentication realm is LOCAL
(4)     [suffix] = ok
(4) eap: Peer sent EAP Response (code 2) ID 179 length 79
(4) eap: Continuing tunnel setup
(4)     [eap] = ok
(4)   } # authorize = ok
(4) Found Auth-Type = eap
(4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(4)   authenticate {
(4) eap: Expiring EAP session with state 0x83ceeacb807dffc5
(4) eap: Finished EAP session with state 0x83ceeacb807dffc5
(4) eap: Previous EAP request found for state 0x83ceeacb807dffc5,
released from the list
(4) eap: Peer sent packet with method EAP TTLS (21)
(4) eap: Calling submodule eap_ttls to process data
(4) eap_ttls: Authenticate
(4) eap_ttls: (TLS) EAP Peer says that the final record size will be 69 bytes
(4) eap_ttls: (TLS) EAP Got all data (69 bytes)
(4) eap_ttls: Session established.  Proceeding to decode tunneled attributes
(4) eap_ttls: Got tunneled request
(4) eap_ttls:   EAP-Message =
0x0200001e01656475726f616d2e7465737440657363692e7570662e656475
(4) eap_ttls:   FreeRADIUS-Proxied-To = 127.0.0.1
(4) eap_ttls: Got tunneled identity of eduroam@ie.edu
(4) eap_ttls: Sending tunneled request
(4) Virtual server inner-tunnel received request
(4)   EAP-Message =
0x0200001e01656475726f616d2e7465737440657363692e7570662e656475
(4)   FreeRADIUS-Proxied-To = 127.0.0.1
(4)   User-Name = "eduroam@ie.edu"
(4)   NAS-Port = 500
(4)   Service-Type = Framed-User
(4)   Framed-Protocol = PPP
(4)   Calling-Station-Id = "163f-2583-85bf"
(4)   NAS-Identifier = "controller1"
(4)   NAS-Port-Type = Wireless-802.11
(4)   NAS-Port-Id = "slot=0;subslot=0;port=0;vlanid=500"
(4)   Called-Station-Id = "00-06-F4-B0-96-F0:MiFibra-AB01"
(4)   Login-IP-Host = 0.0.0.0
(4)   NAS-IP-Address = 10.0.8.4
(4)   Framed-MTU = 1500
(4)   Acct-Session-Id = "control0000000000050094df6a010035b"
(4)   WLAN-Pairwise-Cipher = 0
(4)   WLAN-Group-Cipher = 0
(4)   WLAN-AKM-Suite = 0
(4)   WLAN-Group-Mgmt-Cipher = 0
(4)   Huawei-Startup-Stamp = 1648044398
(4)   Huawei-IPHost-Addr = "255.255.255.255 16:3f:25:83:85:bf"
(4)   Huawei-Connect-ID = 4955
(4)   Huawei-Version = "Huawei AC6005-8"
(4)   Huawei-Product-ID = "AC"
(4)   Huawei-Loopback-Address = "0006-F4B0-96F0"
(4)   Huawei-User-Mac = "\000\000\000\001"
(4)   Event-Timestamp = "Mar  7 2025 14:00:58 CET"
(4) WARNING: Outer and inner identities are the same.  User privacy is
compromised.
(4) server inner-tunnel {
(4)   # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/inner-tunnel
(4)     authorize {
rlm_ldap (ldap): Reserved connection (0)
(4) ldap: EXPAND (mail=%{User-Name})
(4) ldap:    --> (mail=eduroam@ie.edu)
(4) ldap: Performing search in "ou=Users,dc=ie,dc=edu" with filter
"(mail=eduroam@ie.edu)", scope "sub"
(4) ldap: Waiting for search result...
(4) ldap: User object found at DN "uid=etest,ou=Users,dc=ie,dc=edu"
(4) ldap: Processing user attributes
rlm_ldap (ldap): Released connection (0)
Need more connections to reach 10 spares
rlm_ldap (ldap): Opening additional connection (5), 1 of 27 pending slots used
rlm_ldap (ldap): Connecting to ldaps://ldap.ie.edu:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
(4)       [ldap] = ok
(4)       policy filter_username {
(4)         if (&User-Name) {
(4)         if (&User-Name)  -> TRUE
(4)         if (&User-Name)  {
(4)           if (&User-Name =~ / /) {
(4)           if (&User-Name =~ / /)  -> FALSE
(4)           if (&User-Name =~ /@[^@]*@/ ) {
(4)           if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(4)           if (&User-Name =~ /\.\./ ) {
(4)           if (&User-Name =~ /\.\./ )  -> FALSE
(4)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(4)           if ((&User-Name =~ /@/) && (&User-Name !~
/@(.+)\.(.+)$/))   -> FALSE
(4)           if (&User-Name =~ /\.$/)  {
(4)           if (&User-Name =~ /\.$/)   -> FALSE
(4)           if (&User-Name =~ /@\./)  {
(4)           if (&User-Name =~ /@\./)   -> FALSE
(4)         } # if (&User-Name)  = ok
(4)       } # policy filter_username = ok
(4) suffix: Checking for suffix after "@"
(4) suffix: Looking up realm "ie.edu" for User-Name = "eduroam@ie.edu"
(4) suffix: Found realm "ie.edu"
(4) suffix: Adding Stripped-User-Name = "eduroam"
(4) suffix: Adding Realm = "ie.edu"
(4) suffix: Authentication realm is LOCAL
(4)       [suffix] = ok
(4)       update control {
(4)         &Proxy-To-Realm := LOCAL
(4)       } # update control = noop
(4) eap: Peer sent EAP Response (code 2) ID 0 length 30
(4) eap: EAP-Identity reply, returning 'ok' so we can short-circuit
the rest of authorize
(4)       [eap] = ok
(4)     } # authorize = ok
(4)   Found Auth-Type = eap
(4)   # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel
(4)     authenticate {
(4) eap: Peer sent packet with method EAP Identity (1)
(4) eap: Calling submodule eap_ttls to process data
(4) eap_ttls: (TLS) Initiating new session
(4) eap: Sending EAP Request (code 1) ID 1 length 6
(4) eap: EAP session adding &reply:State = 0x5e95050e5e941080
(4)       [eap] = handled
(4)     } # authenticate = handled
(4) } # server inner-tunnel
(4) Virtual server sending reply
(4)   EAP-Message = 0x010100061520
(4)   Message-Authenticator = 0x00000000000000000000000000000000
(4)   State = 0x5e95050e5e9410803cc8846f84059ced
(4) eap_ttls: Got tunneled Access-Challenge
(4) eap: Sending EAP Request (code 1) ID 180 length 55
(4) eap: EAP session adding &reply:State = 0x83ceeacb877affc5
(4)     [eap] = handled
(4)   } # authenticate = handled
(4) Using Post-Auth-Type Challenge
(4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(4)   Challenge { ... } # empty sub-section is ignored
(4) session-state: Saving cached attributes
(4)   Framed-MTU = 994
(4)   TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello"
(4)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello"
(4)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate"
(4)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake,
ServerKeyExchange"
(4)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone"
(4)   TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake,
ClientKeyExchange"
(4)   TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished"
(4)   TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec"
(4)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished"
(4)   TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"
(4)   TLS-Session-Version = "TLS 1.2"
(4) Sent Access-Challenge Id 95 from 10.0.0.209:1812 to 10.0.8.4:61706
length 113
(4)   EAP-Message =
0x01b4003715800000002d170303002887896bbb5b418378c3c4fa2c30f528fe31d76b07518572dd127c87e43a6f96a5866b26e1716aec06
(4)   Message-Authenticator = 0x00000000000000000000000000000000
(4)   State = 0x83ceeacb877affc5a7029ef06b10891f
(4) Finished request
Waking up in 4.8 seconds.
(5) Received Access-Request Id 96 from 10.0.8.4:61706 to
10.0.0.209:1812 length 435
(5)   User-Name = "eduroam@ie.edu"
(5)   NAS-Port = 500
(5)   Service-Type = Framed-User
(5)   Framed-Protocol = PPP
(5)   Calling-Station-Id = "163f-2583-85bf"
(5)   NAS-Identifier = "controller1"
(5)   NAS-Port-Type = Wireless-802.11
(5)   NAS-Port-Id = "slot=0;subslot=0;port=0;vlanid=500"
(5)   State = 0x83ceeacb877affc5a7029ef06b10891f
(5)   EAP-Message =
0x02b4003715800000002d17030300287d4d14d321bdde37ba9a2f3c29c14ada56eb2f249158c7655cf0b4a21d6bfe6c32ea7d65bf77d7ed
(5)   Message-Authenticator = 0xe6f0c9c460d76d467f0388cd09514e14
(5)   Called-Station-Id = "00-06-F4-B0-96-F0:MiFibra-AB01"
(5)   Login-IP-Host = 0.0.0.0
(5)   NAS-IP-Address = 10.0.8.4
(5)   Framed-MTU = 1500
(5)   Acct-Session-Id = "control0000000000050094df6a010035b"
(5)   WLAN-Pairwise-Cipher = 0
(5)   WLAN-Group-Cipher = 0
(5)   WLAN-AKM-Suite = 0
(5)   WLAN-Group-Mgmt-Cipher = 0
(5)   Huawei-Startup-Stamp = 1648044398
(5)   Huawei-IPHost-Addr = "255.255.255.255 16:3f:25:83:85:bf"
(5)   Huawei-Connect-ID = 4955
(5)   Huawei-Version = "Huawei AC6005-8"
(5)   Huawei-Product-ID = "AC"
(5)   Huawei-Loopback-Address = "0006-F4B0-96F0"
(5)   Huawei-User-Mac = "\000\000\000\001"
(5) Restoring &session-state
(5)   &session-state:Framed-MTU = 994
(5)   &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3
Handshake, ClientHello"
(5)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, ServerHello"
(5)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, Certificate"
(5)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, ServerKeyExchange"
(5)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, ServerHelloDone"
(5)   &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2
Handshake, ClientKeyExchange"
(5)   &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2
Handshake, Finished"
(5)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
ChangeCipherSpec"
(5)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, Finished"
(5)   &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"
(5)   &session-state:TLS-Session-Version = "TLS 1.2"
(5) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(5)   authorize {
(5)     policy filter_username {
(5)       if (&User-Name) {
(5)       if (&User-Name)  -> TRUE
(5)       if (&User-Name)  {
(5)         if (&User-Name =~ / /) {
(5)         if (&User-Name =~ / /)  -> FALSE
(5)         if (&User-Name =~ /@[^@]*@/ ) {
(5)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(5)         if (&User-Name =~ /\.\./ ) {
(5)         if (&User-Name =~ /\.\./ )  -> FALSE
(5)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(5)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
  -> FALSE
(5)         if (&User-Name =~ /\.$/)  {
(5)         if (&User-Name =~ /\.$/)   -> FALSE
(5)         if (&User-Name =~ /@\./)  {
(5)         if (&User-Name =~ /@\./)   -> FALSE
(5)       } # if (&User-Name)  = notfound
(5)     } # policy filter_username = notfound
(5)     [preprocess] = ok
(5)     [digest] = noop
(5) suffix: Checking for suffix after "@"
(5) suffix: Looking up realm "ie.edu" for User-Name = "eduroam@ie.edu"
(5) suffix: Found realm "ie.edu"
(5) suffix: Adding Stripped-User-Name = "eduroam"
(5) suffix: Adding Realm = "ie.edu"
(5) suffix: Authentication realm is LOCAL
(5)     [suffix] = ok
(5) eap: Peer sent EAP Response (code 2) ID 180 length 55
(5) eap: Continuing tunnel setup
(5)     [eap] = ok
(5)   } # authorize = ok
(5) Found Auth-Type = eap
(5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(5)   authenticate {
(5) eap: Expiring EAP session with state 0x5e95050e5e941080
(5) eap: Finished EAP session with state 0x83ceeacb877affc5
(5) eap: Previous EAP request found for state 0x83ceeacb877affc5,
released from the list
(5) eap: Peer sent packet with method EAP TTLS (21)
(5) eap: Calling submodule eap_ttls to process data
(5) eap_ttls: Authenticate
(5) eap_ttls: (TLS) EAP Peer says that the final record size will be 45 bytes
(5) eap_ttls: (TLS) EAP Got all data (45 bytes)
(5) eap_ttls: Session established.  Proceeding to decode tunneled attributes
(5) eap_ttls: Got tunneled request
(5) eap_ttls:   EAP-Message = 0x02010006031a
(5) eap_ttls:   FreeRADIUS-Proxied-To = 127.0.0.1
(5) eap_ttls: Sending tunneled request
(5) Virtual server inner-tunnel received request
(5)   EAP-Message = 0x02010006031a
(5)   FreeRADIUS-Proxied-To = 127.0.0.1
(5)   User-Name = "eduroam@ie.edu"
(5)   State = 0x5e95050e5e9410803cc8846f84059ced
(5)   NAS-Port = 500
(5)   Service-Type = Framed-User
(5)   Framed-Protocol = PPP
(5)   Calling-Station-Id = "163f-2583-85bf"
(5)   NAS-Identifier = "controller1"
(5)   NAS-Port-Type = Wireless-802.11
(5)   NAS-Port-Id = "slot=0;subslot=0;port=0;vlanid=500"
(5)   Called-Station-Id = "00-06-F4-B0-96-F0:MiFibra-AB01"
(5)   Login-IP-Host = 0.0.0.0
(5)   NAS-IP-Address = 10.0.8.4
(5)   Framed-MTU = 1500
(5)   Acct-Session-Id = "control0000000000050094df6a010035b"
(5)   WLAN-Pairwise-Cipher = 0
(5)   WLAN-Group-Cipher = 0
(5)   WLAN-AKM-Suite = 0
(5)   WLAN-Group-Mgmt-Cipher = 0
(5)   Huawei-Startup-Stamp = 1648044398
(5)   Huawei-IPHost-Addr = "255.255.255.255 16:3f:25:83:85:bf"
(5)   Huawei-Connect-ID = 4955
(5)   Huawei-Version = "Huawei AC6005-8"
(5)   Huawei-Product-ID = "AC"
(5)   Huawei-Loopback-Address = "0006-F4B0-96F0"
(5)   Huawei-User-Mac = "\000\000\000\001"
(5)   Event-Timestamp = "Mar  7 2025 14:00:58 CET"
(5) WARNING: Outer and inner identities are the same.  User privacy is
compromised.
(5) server inner-tunnel {
(5)   session-state: No cached attributes
(5)   # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/inner-tunnel
(5)     authorize {
rlm_ldap (ldap): Reserved connection (1)
(5) ldap: EXPAND (mail=%{User-Name})
(5) ldap:    --> (mail=eduroam@ie.edu)
(5) ldap: Performing search in "ou=Users,dc=ie,dc=edu" with filter
"(mail=eduroam@ie.edu)", scope "sub"
(5) ldap: Waiting for search result...
(5) ldap: User object found at DN "uid=etest,ou=Users,dc=ie,dc=edu"
(5) ldap: Processing user attributes
rlm_ldap (ldap): Released connection (1)
(5)       [ldap] = ok
(5)       policy filter_username {
(5)         if (&User-Name) {
(5)         if (&User-Name)  -> TRUE
(5)         if (&User-Name)  {
(5)           if (&User-Name =~ / /) {
(5)           if (&User-Name =~ / /)  -> FALSE
(5)           if (&User-Name =~ /@[^@]*@/ ) {
(5)           if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(5)           if (&User-Name =~ /\.\./ ) {
(5)           if (&User-Name =~ /\.\./ )  -> FALSE
(5)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(5)           if ((&User-Name =~ /@/) && (&User-Name !~
/@(.+)\.(.+)$/))   -> FALSE
(5)           if (&User-Name =~ /\.$/)  {
(5)           if (&User-Name =~ /\.$/)   -> FALSE
(5)           if (&User-Name =~ /@\./)  {
(5)           if (&User-Name =~ /@\./)   -> FALSE
(5)         } # if (&User-Name)  = ok
(5)       } # policy filter_username = ok
(5) suffix: Checking for suffix after "@"
(5) suffix: Looking up realm "ie.edu" for User-Name = "eduroam@ie.edu"
(5) suffix: Found realm "ie.edu"
(5) suffix: Adding Stripped-User-Name = "eduroam"
(5) suffix: Adding Realm = "ie.edu"
(5) suffix: Authentication realm is LOCAL
(5)       [suffix] = ok
(5)       update control {
(5)         &Proxy-To-Realm := LOCAL
(5)       } # update control = noop
(5) eap: Peer sent EAP Response (code 2) ID 1 length 6
(5) eap: No EAP Start, assuming it's an on-going EAP conversation
(5)       [eap] = updated
(5) files: users: Matched entry DEFAULT at line 167
(5)       [files] = ok
rlm_ldap (ldap): Reserved connection (2)
(5) ldap: EXPAND (mail=%{User-Name})
(5) ldap:    --> (mail=eduroam@ie.edu)
(5) ldap: Performing search in "ou=Users,dc=ie,dc=edu" with filter
"(mail=eduroam@ie.edu)", scope "sub"
(5) ldap: Waiting for search result...
(5) ldap: User object found at DN "uid=etest,ou=Users,dc=ie,dc=edu"
(5) ldap: Processing user attributes
rlm_ldap (ldap): Released connection (2)
(5)       [ldap] = ok
(5)       [expiration] = noop
(5)       [logintime] = noop
(5)       [pap] = noop
(5)     } # authorize = updated
(5)   Found Auth-Type = eap
(5)   # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel
(5)     authenticate {
(5) eap: Expiring EAP session with state 0x5e95050e5e941080
(5) eap: Finished EAP session with state 0x5e95050e5e941080
(5) eap: Previous EAP request found for state 0x5e95050e5e941080,
released from the list
(5) eap: Peer sent packet with method EAP NAK (3)
(5) eap: Found mutually acceptable type MSCHAPv2 (26)
(5) eap: Calling submodule eap_mschapv2 to process data
(5) eap_mschapv2: Issuing Challenge
(5) eap: Sending EAP Request (code 1) ID 2 length 42
(5) eap: EAP session adding &reply:State = 0x5e95050e5f971f80
(5)       [eap] = handled
(5)     } # authenticate = handled
(5) } # server inner-tunnel
(5) Virtual server sending reply
(5)   Framed-Protocol = PPP
(5)   Framed-Compression = Van-Jacobson-TCP-IP
(5)   EAP-Message =
0x0102002a1a0102002510f83233464845fedc7b18038954d18a5f667265657261646975732d332e322e31
(5)   Message-Authenticator = 0x00000000000000000000000000000000
(5)   State = 0x5e95050e5f971f803cc8846f84059ced
(5) eap_ttls: Got tunneled Access-Challenge
(5) eap: Sending EAP Request (code 1) ID 181 length 91
(5) eap: EAP session adding &reply:State = 0x83ceeacb867bffc5
(5)     [eap] = handled
(5)   } # authenticate = handled
(5) Using Post-Auth-Type Challenge
(5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(5)   Challenge { ... } # empty sub-section is ignored
(5) session-state: Saving cached attributes
(5)   Framed-MTU = 994
(5)   TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello"
(5)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello"
(5)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate"
(5)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake,
ServerKeyExchange"
(5)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone"
(5)   TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake,
ClientKeyExchange"
(5)   TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished"
(5)   TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec"
(5)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished"
(5)   TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"
(5)   TLS-Session-Version = "TLS 1.2"
(5) Sent Access-Challenge Id 96 from 10.0.0.209:1812 to 10.0.8.4:61706
length 149
(5)   EAP-Message =
0x01b5005b158000000051170303004c87896bbb5b418379d862073808ce4afae3d814a930374f7cab478c4da03d28ce86d891ae6c92921b5bddd5cf3174a2dcd82255634bf6a49f6e640ec52a1fd9e1ff67be1112403ec22e66f068
(5)   Message-Authenticator = 0x00000000000000000000000000000000
(5)   State = 0x83ceeacb867bffc5a7029ef06b10891f
(5) Finished request
Waking up in 4.8 seconds.
(6) Received Access-Request Id 97 from 10.0.8.4:61706 to
10.0.0.209:1812 length 511
(6)   User-Name = "eduroam@ie.edu"
(6)   NAS-Port = 500
(6)   Service-Type = Framed-User
(6)   Framed-Protocol = PPP
(6)   Calling-Station-Id = "163f-2583-85bf"
(6)   NAS-Identifier = "controller1"
(6)   NAS-Port-Type = Wireless-802.11
(6)   NAS-Port-Id = "slot=0;subslot=0;port=0;vlanid=500"
(6)   State = 0x83ceeacb867bffc5a7029ef06b10891f
(6)   EAP-Message =
0x02b5008315800000007917030300747d4d14d321bdde38659686c1d52326c11419ba73f308f589360d12bca97def85ca33636ca4b0bed273e3bd2422364a964a2e8a54387c27838ab096c2302a858709bd768e115d7bdef8320bbbb07b773fa45504995a9acca7a6ffb41aaa669930778dd90af1a20c25301408f448d9c9e3fb5e729e
(6)   Message-Authenticator = 0x68d46baa2dd139eab8e105332ee7a9f1
(6)   Called-Station-Id = "00-06-F4-B0-96-F0:MiFibra-AB01"
(6)   Login-IP-Host = 0.0.0.0
(6)   NAS-IP-Address = 10.0.8.4
(6)   Framed-MTU = 1500
(6)   Acct-Session-Id = "control0000000000050094df6a010035b"
(6)   WLAN-Pairwise-Cipher = 0
(6)   WLAN-Group-Cipher = 0
(6)   WLAN-AKM-Suite = 0
(6)   WLAN-Group-Mgmt-Cipher = 0
(6)   Huawei-Startup-Stamp = 1648044398
(6)   Huawei-IPHost-Addr = "255.255.255.255 16:3f:25:83:85:bf"
(6)   Huawei-Connect-ID = 4955
(6)   Huawei-Version = "Huawei AC6005-8"
(6)   Huawei-Product-ID = "AC"
(6)   Huawei-Loopback-Address = "0006-F4B0-96F0"
(6)   Huawei-User-Mac = "\000\000\000\001"
(6) Restoring &session-state
(6)   &session-state:Framed-MTU = 994
(6)   &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3
Handshake, ClientHello"
(6)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, ServerHello"
(6)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, Certificate"
(6)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, ServerKeyExchange"
(6)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, ServerHelloDone"
(6)   &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2
Handshake, ClientKeyExchange"
(6)   &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2
Handshake, Finished"
(6)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
ChangeCipherSpec"
(6)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, Finished"
(6)   &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"
(6)   &session-state:TLS-Session-Version = "TLS 1.2"
(6) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(6)   authorize {
(6)     policy filter_username {
(6)       if (&User-Name) {
(6)       if (&User-Name)  -> TRUE
(6)       if (&User-Name)  {
(6)         if (&User-Name =~ / /) {
(6)         if (&User-Name =~ / /)  -> FALSE
(6)         if (&User-Name =~ /@[^@]*@/ ) {
(6)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(6)         if (&User-Name =~ /\.\./ ) {
(6)         if (&User-Name =~ /\.\./ )  -> FALSE
(6)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(6)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
  -> FALSE
(6)         if (&User-Name =~ /\.$/)  {
(6)         if (&User-Name =~ /\.$/)   -> FALSE
(6)         if (&User-Name =~ /@\./)  {
(6)         if (&User-Name =~ /@\./)   -> FALSE
(6)       } # if (&User-Name)  = notfound
(6)     } # policy filter_username = notfound
(6)     [preprocess] = ok
(6)     [digest] = noop
(6) suffix: Checking for suffix after "@"
(6) suffix: Looking up realm "ie.edu" for User-Name = "eduroam@ie.edu"
(6) suffix: Found realm "ie.edu"
(6) suffix: Adding Stripped-User-Name = "eduroam"
(6) suffix: Adding Realm = "ie.edu"
(6) suffix: Authentication realm is LOCAL
(6)     [suffix] = ok
(6) eap: Peer sent EAP Response (code 2) ID 181 length 131
(6) eap: Continuing tunnel setup
(6)     [eap] = ok
(6)   } # authorize = ok
(6) Found Auth-Type = eap
(6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(6)   authenticate {
(6) eap: Expiring EAP session with state 0x5e95050e5f971f80
(6) eap: Finished EAP session with state 0x83ceeacb867bffc5
(6) eap: Previous EAP request found for state 0x83ceeacb867bffc5,
released from the list
(6) eap: Peer sent packet with method EAP TTLS (21)
(6) eap: Calling submodule eap_ttls to process data
(6) eap_ttls: Authenticate
(6) eap_ttls: (TLS) EAP Peer says that the final record size will be 121 bytes
(6) eap_ttls: (TLS) EAP Got all data (121 bytes)
(6) eap_ttls: Session established.  Proceeding to decode tunneled attributes
(6) eap_ttls: Got tunneled request
(6) eap_ttls:   EAP-Message =
0x020200541a0202004f31314b383ab05b5a98791533e0d60792d3000000000000000018c4016c1a93ce8d4dedf2315158c6f40d7b6f4d25c3f0de00656475726f616d2e7465737440657363692e7570662e656475
(6) eap_ttls:   FreeRADIUS-Proxied-To = 127.0.0.1
(6) eap_ttls: Sending tunneled request
(6) Virtual server inner-tunnel received request
(6)   EAP-Message =
0x020200541a0202004f31314b383ab05b5a98791533e0d60792d3000000000000000018c4016c1a93ce8d4dedf2315158c6f40d7b6f4d25c3f0de00656475726f616d2e7465737440657363692e7570662e656475
(6)   FreeRADIUS-Proxied-To = 127.0.0.1
(6)   User-Name = "eduroam@ie.edu"
(6)   State = 0x5e95050e5f971f803cc8846f84059ced
(6)   NAS-Port = 500
(6)   Service-Type = Framed-User
(6)   Framed-Protocol = PPP
(6)   Calling-Station-Id = "163f-2583-85bf"
(6)   NAS-Identifier = "controller1"
(6)   NAS-Port-Type = Wireless-802.11
(6)   NAS-Port-Id = "slot=0;subslot=0;port=0;vlanid=500"
(6)   Called-Station-Id = "00-06-F4-B0-96-F0:MiFibra-AB01"
(6)   Login-IP-Host = 0.0.0.0
(6)   NAS-IP-Address = 10.0.8.4
(6)   Framed-MTU = 1500
(6)   Acct-Session-Id = "control0000000000050094df6a010035b"
(6)   WLAN-Pairwise-Cipher = 0
(6)   WLAN-Group-Cipher = 0
(6)   WLAN-AKM-Suite = 0
(6)   WLAN-Group-Mgmt-Cipher = 0
(6)   Huawei-Startup-Stamp = 1648044398
(6)   Huawei-IPHost-Addr = "255.255.255.255 16:3f:25:83:85:bf"
(6)   Huawei-Connect-ID = 4955
(6)   Huawei-Version = "Huawei AC6005-8"
(6)   Huawei-Product-ID = "AC"
(6)   Huawei-Loopback-Address = "0006-F4B0-96F0"
(6)   Huawei-User-Mac = "\000\000\000\001"
(6)   Event-Timestamp = "Mar  7 2025 14:00:59 CET"
(6) WARNING: Outer and inner identities are the same.  User privacy is
compromised.
(6) server inner-tunnel {
(6)   session-state: No cached attributes
(6)   # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/inner-tunnel
(6)     authorize {
rlm_ldap (ldap): Reserved connection (3)
(6) ldap: EXPAND (mail=%{User-Name})
(6) ldap:    --> (mail=eduroam@ie.edu)
(6) ldap: Performing search in "ou=Users,dc=ie,dc=edu" with filter
"(mail=eduroam@ie.edu)", scope "sub"
(6) ldap: Waiting for search result...
(6) ldap: User object found at DN "uid=etest,ou=Users,dc=ie,dc=edu"
(6) ldap: Processing user attributes
rlm_ldap (ldap): Released connection (3)
Need more connections to reach 10 spares
rlm_ldap (ldap): Opening additional connection (6), 1 of 26 pending slots used
rlm_ldap (ldap): Connecting to ldaps://ldap.ie.edu:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
(6)       [ldap] = ok
(6)       policy filter_username {
(6)         if (&User-Name) {
(6)         if (&User-Name)  -> TRUE
(6)         if (&User-Name)  {
(6)           if (&User-Name =~ / /) {
(6)           if (&User-Name =~ / /)  -> FALSE
(6)           if (&User-Name =~ /@[^@]*@/ ) {
(6)           if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(6)           if (&User-Name =~ /\.\./ ) {
(6)           if (&User-Name =~ /\.\./ )  -> FALSE
(6)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(6)           if ((&User-Name =~ /@/) && (&User-Name !~
/@(.+)\.(.+)$/))   -> FALSE
(6)           if (&User-Name =~ /\.$/)  {
(6)           if (&User-Name =~ /\.$/)   -> FALSE
(6)           if (&User-Name =~ /@\./)  {
(6)           if (&User-Name =~ /@\./)   -> FALSE
(6)         } # if (&User-Name)  = ok
(6)       } # policy filter_username = ok
(6) suffix: Checking for suffix after "@"
(6) suffix: Looking up realm "ie.edu" for User-Name = "eduroam@ie.edu"
(6) suffix: Found realm "ie.edu"
(6) suffix: Adding Stripped-User-Name = "eduroam"
(6) suffix: Adding Realm = "ie.edu"
(6) suffix: Authentication realm is LOCAL
(6)       [suffix] = ok
(6)       update control {
(6)         &Proxy-To-Realm := LOCAL
(6)       } # update control = noop
(6) eap: Peer sent EAP Response (code 2) ID 2 length 84
(6) eap: No EAP Start, assuming it's an on-going EAP conversation
(6)       [eap] = updated
(6) files: users: Matched entry DEFAULT at line 167
(6)       [files] = ok
rlm_ldap (ldap): Reserved connection (4)
(6) ldap: EXPAND (mail=%{User-Name})
(6) ldap:    --> (mail=eduroam@ie.edu)
(6) ldap: Performing search in "ou=Users,dc=ie,dc=edu" with filter
"(mail=eduroam@ie.edu)", scope "sub"
(6) ldap: Waiting for search result...
(6) ldap: User object found at DN "uid=etest,ou=Users,dc=ie,dc=edu"
(6) ldap: Processing user attributes
rlm_ldap (ldap): Released connection (4)
(6)       [ldap] = ok
(6)       [expiration] = noop
(6)       [logintime] = noop
(6)       [pap] = noop
(6)     } # authorize = updated
(6)   Found Auth-Type = eap
(6)   # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel
(6)     authenticate {
(6) eap: Expiring EAP session with state 0x5e95050e5f971f80
(6) eap: Finished EAP session with state 0x5e95050e5f971f80
(6) eap: Previous EAP request found for state 0x5e95050e5f971f80,
released from the list
(6) eap: Peer sent packet with method EAP MSCHAPv2 (26)
(6) eap: Calling submodule eap_mschapv2 to process data
(6) eap_mschapv2: Auth-Type sub-section not found.  Ignoring.
(6) eap_mschapv2: # Executing group from file
/etc/freeradius/3.0/sites-enabled/inner-tunnel
(6) eap: Sending EAP Failure (code 4) ID 2 length 4
(6) eap: Freeing handler
(6)       [eap] = reject
(6)     } # authenticate = reject
(6)   Failed to authenticate the user
(6)   Using Post-Auth-Type Reject
(6)   # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel
(6)     Post-Auth-Type REJECT {
(6) attr_filter.access_reject: EXPAND %{User-Name}
(6) attr_filter.access_reject:    --> eduroam@ie.edu
(6) attr_filter.access_reject: Matched entry DEFAULT at line 11
(6)       [attr_filter.access_reject] = updated
(6)       update outer.session-state {
(6)         No attributes updated for RHS &request:Module-Failure-Message
(6)       } # update outer.session-state = noop
(6)     } # Post-Auth-Type REJECT = updated
(6) } # server inner-tunnel
(6) Virtual server sending reply
(6)   EAP-Message = 0x04020004
(6)   Message-Authenticator = 0x00000000000000000000000000000000
(6) eap_ttls: Got tunneled Access-Reject
(6) eap: ERROR: Failed continuing EAP TTLS (21) session.  EAP sub-module failed
(6) eap: Sending EAP Failure (code 4) ID 181 length 4
(6) eap: Failed in EAP select
(6)     [eap] = invalid
(6)   } # authenticate = invalid
(6) Failed to authenticate the user
(6) Using Post-Auth-Type Reject
(6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(6)   Post-Auth-Type REJECT {
(6) attr_filter.access_reject: EXPAND %{User-Name}
(6) attr_filter.access_reject:    --> eduroam@ie.edu
(6) attr_filter.access_reject: Matched entry DEFAULT at line 11
(6)     [attr_filter.access_reject] = updated
(6)     [eap] = noop
(6)     policy remove_reply_message_if_eap {
(6)       if (&reply:EAP-Message && &reply:Reply-Message) {
(6)       if (&reply:EAP-Message && &reply:Reply-Message)  -> FALSE
(6)       else {
(6)         [noop] = noop
(6)       } # else = noop
(6)     } # policy remove_reply_message_if_eap = noop
(6)   } # Post-Auth-Type REJECT = updated
(6) Delaying response for 1.000000 seconds
Waking up in 0.3 seconds.
Waking up in 0.6 seconds.
(6) Sending delayed response
(6) Sent Access-Reject Id 97 from 10.0.0.209:1812 to 10.0.8.4:61706 length 44
(6)   EAP-Message = 0x04b50004
(6)   Message-Authenticator = 0x00000000000000000000000000000000
Waking up in 3.7 seconds.

This is what can be seen trying to validate from Android device:

Would be graceful if someone can help me out or guide me on the right
direction as I've been working on this for over a months without much
results.

Thanks,

Difficulties trying bind as user to openLDAP

t5elrues elrues