Re: Troubleshooting EAP-TLS with External Certificates

9 Sep 2016

      On Fri, Sep 9, 2016 at 1:09 AM, Matthew West <matthew.t.west@gmail.com>
wrote:
...
Alan, Alan, and FR Users,
Thank you for your help and direction while figuring out configuration
of FreeRADIUS.  You've been very helpful.
*** 1st Question: Are there any implications when removing the space
filter from policy.d?
In my attempts to get FreeRADIUS configured to work with e-mail/auth
certificates (previously issued), I was given a new 'CA Cert' to use
with our e-mail certificates.  I am now successfully authenticating
with the new CA file I was given and my e-mail certificate.
Unfortunately, the 'User-Name' field was filled with 'User Name' with
a space and failed the username field check.  I removed the space
filter from /etc/raddb/policy.d and I can now authenticate.  (Output
below).
...
If you use a public CA then anyone else can get a cert signed by that CA
for small change, they can then do eg evil twin etc attacks and badly
configured clients will auth against them. ..thus giving them the users
password (or easily cloud cracked mschap challenge/response)... many
clients have basic security...eg only trust the CA. So local CA is the one
way to ensure lowest common denominator is secure.
*** 2nd Question: If my company uses an internal CA certificate that
was issued/signed by Verisign and is bundled with the public CA's
chain, are there security implications with using the bundle?  (Output
below)
Thank You,
Matthew West
PS - I have not started removing unwanted modules from /mods-enabled,
will be doing that after confirming the working setup.
---
[root@localhost ~]# radiusd -X
radiusd: FreeRADIUS Version 3.0.4, for host x86_64-redhat-linux-gnu,
built on Mar  5 2015 at 23:41:36
Copyright (C) 1999-2014 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/raddb/dictionary
including configuration file /etc/raddb/radiusd.conf
including configuration file /etc/raddb/proxy.conf
including configuration file /etc/raddb/clients.conf
including files in directory /etc/raddb/mods-enabled/
including configuration file /etc/raddb/mods-enabled/always
including configuration file /etc/raddb/mods-enabled/attr_filter
including configuration file /etc/raddb/mods-enabled/cache_eap
including configuration file /etc/raddb/mods-enabled/chap
including configuration file /etc/raddb/mods-enabled/detail
including configuration file /etc/raddb/mods-enabled/detail.log
including configuration file /etc/raddb/mods-enabled/dhcp
including configuration file /etc/raddb/mods-enabled/digest
including configuration file /etc/raddb/mods-enabled/dynamic_clients
including configuration file /etc/raddb/mods-enabled/eap
including configuration file /etc/raddb/mods-enabled/echo
including configuration file /etc/raddb/mods-enabled/exec
including configuration file /etc/raddb/mods-enabled/expiration
including configuration file /etc/raddb/mods-enabled/expr
including configuration file /etc/raddb/mods-enabled/files
including configuration file /etc/raddb/mods-enabled/linelog
including configuration file /etc/raddb/mods-enabled/logintime
including configuration file /etc/raddb/mods-enabled/mschap
including configuration file /etc/raddb/mods-enabled/ntlm_auth
including configuration file /etc/raddb/mods-enabled/pap
including configuration file /etc/raddb/mods-enabled/passwd
including configuration file /etc/raddb/mods-enabled/preprocess
including configuration file /etc/raddb/mods-enabled/radutmp
including configuration file /etc/raddb/mods-enabled/realm
including configuration file /etc/raddb/mods-enabled/replicate
including configuration file /etc/raddb/mods-enabled/soh
including configuration file /etc/raddb/mods-enabled/sradutmp
including configuration file /etc/raddb/mods-enabled/unix
including configuration file /etc/raddb/mods-enabled/unpack
including configuration file /etc/raddb/mods-enabled/utf8
including files in directory /etc/raddb/policy.d/
including configuration file /etc/raddb/policy.d/accounting
including configuration file /etc/raddb/policy.d/canonicalization
including configuration file /etc/raddb/policy.d/control
including configuration file /etc/raddb/policy.d/cui
including configuration file /etc/raddb/policy.d/debug
including configuration file /etc/raddb/policy.d/dhcp
including configuration file /etc/raddb/policy.d/eap
including configuration file /etc/raddb/policy.d/filter
including configuration file /etc/raddb/policy.d/operator-name
including files in directory /etc/raddb/sites-enabled/
including configuration file /etc/raddb/sites-enabled/default
including configuration file /etc/raddb/sites-enabled/inner-tunnel
main {
 security {
  user = "radiusd"
  group = "radiusd"
  allow_core_dumps = no
 }
}
main {
name = "radiusd"
prefix = "/usr"
localstatedir = "/var"
sbindir = "/usr/sbin"
logdir = "/var/log/radius"
run_dir = "/var/run/radiusd"
libdir = "/usr/lib64/freeradius"
radacctdir = "/var/log/radius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 1024
pidfile = "/var/run/radiusd/radiusd.pid"
checkrad = "/usr/sbin/checkrad"
debug_level = 0
proxy_requests = yes
 log {
  stripped_names = no
  auth = no
  auth_badpass = no
  auth_goodpass = no
  colourise = yes
  msg_denied = "You are already logged in - access denied"
 }
 security {
  max_attributes = 200
  reject_delay = 1
  status_server = yes
 }
}
radiusd: #### Loading Realms and Home Servers ####
 proxy server {
  retry_delay = 5
  retry_count = 3
  default_fallback = no
  dead_time = 120
  wake_all_if_all_dead = no
 }
 home_server localhost {
  ipaddr = 127.0.0.1
  port = 1812
  type = "auth"
  secret = <<< secret >>>
  response_window = 20.000000
  response_timeouts = 1
  max_outstanding = 65536
  zombie_period = 40
  status_check = "status-server"
  ping_interval = 30
  check_interval = 30
  check_timeout = 4
  num_answers_to_alive = 3
  revive_interval = 120
  coa {
  irt = 2
  mrt = 16
  mrc = 5
  mrd = 30
  }
  limit {
  max_connections = 16
  max_requests = 0
  lifetime = 0
  idle_timeout = 0
  }
 }
 home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
 }
 realm example.com {
auth_pool = my_auth_failover
 }
 realm LOCAL {
 }
radiusd: #### Loading Clients ####
 client localhost {
  ipaddr = 127.0.0.1
  require_message_authenticator = no
  secret = <<< secret >>>
  nas_type = "other"
  proto = "*"
  limit {
  max_connections = 16
  lifetime = 0
  idle_timeout = 30
  }
 }
 client localhost_ipv6 {
  ipv6addr = ::1
  require_message_authenticator = no
  secret = <<< secret >>>
  limit {
  max_connections = 16
  lifetime = 0
  idle_timeout = 30
  }
 }
 client bea-corp-sw1 {
  ipaddr = 10.XX.XX.123
  require_message_authenticator = no
  secret = <<< secret >>>
  limit {
  max_connections = 16
  lifetime = 0
  idle_timeout = 30
  }
 }
radiusd: #### Instantiating modules ####
 instantiate {
 }
 modules {
  # Loaded module rlm_always
  # Instantiating module "reject" from file /etc/raddb/mods-enabled/always
  always reject {
  rcode = "reject"
  simulcount = 0
  mpp = no
  }
  # Instantiating module "fail" from file /etc/raddb/mods-enabled/always
  always fail {
  rcode = "fail"
  simulcount = 0
  mpp = no
  }
  # Instantiating module "ok" from file /etc/raddb/mods-enabled/always
  always ok {
  rcode = "ok"
  simulcount = 0
  mpp = no
  }
  # Instantiating module "handled" from file /etc/raddb/mods-enabled/always
  always handled {
  rcode = "handled"
  simulcount = 0
  mpp = no
  }
  # Instantiating module "invalid" from file /etc/raddb/mods-enabled/always
  always invalid {
  rcode = "invalid"
  simulcount = 0
  mpp = no
  }
  # Instantiating module "userlock" from file
/etc/raddb/mods-enabled/always
  always userlock {
  rcode = "userlock"
  simulcount = 0
  mpp = no
  }
  # Instantiating module "notfound" from file
/etc/raddb/mods-enabled/always
  always notfound {
  rcode = "notfound"
  simulcount = 0
  mpp = no
  }
  # Instantiating module "noop" from file /etc/raddb/mods-enabled/always
  always noop {
  rcode = "noop"
  simulcount = 0
  mpp = no
  }
  # Instantiating module "updated" from file /etc/raddb/mods-enabled/always
  always updated {
  rcode = "updated"
  simulcount = 0
  mpp = no
  }
  # Loaded module rlm_attr_filter
  # Instantiating module "attr_filter.post-proxy" from file
/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.post-proxy {
  filename = "/etc/raddb/mods-config/attr_filter/post-proxy"
  key = "%{Realm}"
  relaxed = no
  }
reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy
  # Instantiating module "attr_filter.pre-proxy" from file
/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.pre-proxy {
  filename = "/etc/raddb/mods-config/attr_filter/pre-proxy"
  key = "%{Realm}"
  relaxed = no
  }
reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy
  # Instantiating module "attr_filter.access_reject" from file
/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.access_reject {
  filename = "/etc/raddb/mods-config/attr_filter/access_reject"
  key = "%{User-Name}"
  relaxed = no
  }
reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject
  # Instantiating module "attr_filter.access_challenge" from file
/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.access_challenge {
  filename = "/etc/raddb/mods-config/attr_filter/access_challenge"
  key = "%{User-Name}"
  relaxed = no
  }
reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge
  # Instantiating module "attr_filter.accounting_response" from file
/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.accounting_response {
  filename = "/etc/raddb/mods-config/attr_filter/accounting_response"
  key = "%{User-Name}"
  relaxed = no
  }
reading pairlist file /etc/raddb/mods-config/attr_
filter/accounting_response
  # Loaded module rlm_cache
  # Instantiating module "cache_eap" from file
/etc/raddb/mods-enabled/cache_eap
  cache cache_eap {
  key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
  ttl = 15
  max_entries = 16384
  epoch = 0
  add_stats = no
  }
  # Loaded module rlm_chap
  # Instantiating module "chap" from file /etc/raddb/mods-enabled/chap
  # Loaded module rlm_detail
  # Instantiating module "detail" from file /etc/raddb/mods-enabled/detail
  detail {
  filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{
Packet-Src-IPv6-Address}}/detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  log_packet_header = no
  }
  # Instantiating module "auth_log" from file /etc/raddb/mods-enabled/
detail.log
  detail auth_log {
  filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{
Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  log_packet_header = no
  }
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
detail output
  # Instantiating module "reply_log" from file
/etc/raddb/mods-enabled/detail.log
  detail reply_log {
  filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{
Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  log_packet_header = no
  }
  # Instantiating module "pre_proxy_log" from file
/etc/raddb/mods-enabled/detail.log
  detail pre_proxy_log {
  filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{
Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  log_packet_header = no
  }
  # Instantiating module "post_proxy_log" from file
/etc/raddb/mods-enabled/detail.log
  detail post_proxy_log {
  filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{
Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  log_packet_header = no
  }
  # Loaded module rlm_dhcp
  # Instantiating module "dhcp" from file /etc/raddb/mods-enabled/dhcp
  # Loaded module rlm_digest
  # Instantiating module "digest" from file /etc/raddb/mods-enabled/digest
  # Loaded module rlm_dynamic_clients
  # Instantiating module "dynamic_clients" from file
/etc/raddb/mods-enabled/dynamic_clients
  # Loaded module rlm_eap
  # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap
  eap {
  default_eap_type = "md5"
  timer_expire = 60
  ignore_unknown_eap_types = no
  mod_accounting_username_bug = no
  max_sessions = 1024
  }
   # Linked to sub-module rlm_eap_md5
   # Linked to sub-module rlm_eap_leap
   # Linked to sub-module rlm_eap_gtc
   gtc {
    challenge = "Password: "
    auth_type = "PAP"
   }
   # Linked to sub-module rlm_eap_tls
   tls {
    tls = "tls-common"
   }
   tls-config tls-common {
    rsa_key_exchange = no
    dh_key_exchange = yes
    rsa_key_length = 512
    dh_key_length = 512
    verify_depth = 0
    ca_path = "/etc/raddb/certs"
    pem_file_type = yes
    private_key_file = "/etc/raddb/certs/server.pem"
    certificate_file = "/etc/raddb/certs/server.pem"
    ca_file = "/etc/raddb/certs/ACME_bundle.crt"
    private_key_password = <<< secret >>>
    dh_file = "/etc/raddb/certs/dh"
    fragment_size = 1024
    include_length = yes
    check_crl = no
    cipher_list = "DEFAULT"
    ecdh_curve = "prime256v1"
    cache {
    enable = yes
    lifetime = 24
    max_entries = 255
    }
    verify {
    }
    ocsp {
    enable = no
    override_cert_url = yes
    url = "http://127.0.0.1/ocsp/"
    use_nonce = yes
    timeout = 0
    softfail = yes
    }
   }
   # Linked to sub-module rlm_eap_ttls
   ttls {
    tls = "tls-common"
    default_eap_type = "md5"
    copy_request_to_tunnel = no
    use_tunneled_reply = no
    virtual_server = "inner-tunnel"
    include_length = yes
    require_client_cert = no
   }
Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_peap
   peap {
    tls = "tls-common"
    default_method = "mschapv2"
    copy_request_to_tunnel = no
    use_tunneled_reply = no
    proxy_tunneled_request_as_eap = yes
    virtual_server = "inner-tunnel"
    soh = no
    require_client_cert = no
   }
Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_mschapv2
   mschapv2 {
    with_ntdomain_hack = no
    send_error = no
   }
  # Loaded module rlm_exec
  # Instantiating module "echo" from file /etc/raddb/mods-enabled/echo
  exec echo {
  wait = yes
  program = "/bin/echo %{User-Name}"
  input_pairs = "request"
  output_pairs = "reply"
  shell_escape = yes
  }
  # Instantiating module "exec" from file /etc/raddb/mods-enabled/exec
  exec {
  wait = no
  input_pairs = "request"
  shell_escape = yes
  timeout = 10
  }
  # Loaded module rlm_expiration
  # Instantiating module "expiration" from file
/etc/raddb/mods-enabled/expiration
  # Loaded module rlm_expr
  # Instantiating module "expr" from file /etc/raddb/mods-enabled/expr
  expr {
  safe_characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
/"
  }
  # Loaded module rlm_files
  # Instantiating module "files" from file /etc/raddb/mods-enabled/files
  files {
  filename = "/etc/raddb/mods-config/files/authorize"
  usersfile = "/etc/raddb/mods-config/files/authorize"
  acctusersfile = "/etc/raddb/mods-config/files/accounting"
  preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy"
  compat = "cistron"
  }
reading pairlist file /etc/raddb/mods-config/files/authorize
[/etc/raddb/mods-config/files/authorize]:87 Cistron compatibility
checks for entry bob ...
[/etc/raddb/mods-config/files/authorize]:181 Cistron compatibility
checks for entry DEFAULT ...
[/etc/raddb/mods-config/files/authorize]:188 Cistron compatibility
checks for entry DEFAULT ...
[/etc/raddb/mods-config/files/authorize]:195 Cistron compatibility
checks for entry DEFAULT ...
reading pairlist file /etc/raddb/mods-config/files/authorize
[/etc/raddb/mods-config/files/authorize]:87 Cistron compatibility
checks for entry bob ...
[/etc/raddb/mods-config/files/authorize]:181 Cistron compatibility
checks for entry DEFAULT ...
[/etc/raddb/mods-config/files/authorize]:188 Cistron compatibility
checks for entry DEFAULT ...
[/etc/raddb/mods-config/files/authorize]:195 Cistron compatibility
checks for entry DEFAULT ...
reading pairlist file /etc/raddb/mods-config/files/accounting
reading pairlist file /etc/raddb/mods-config/files/pre-proxy
  # Loaded module rlm_linelog
  # Instantiating module "linelog" from file /etc/raddb/mods-enabled/
linelog
  linelog {
  filename = "/var/log/radius/linelog"
  permissions = 384
  format = "This is a log message for %{User-Name}"
  reference = "messages.%{%{Packet-Type}:-default}"
  }
  # Instantiating module "log_accounting" from file
/etc/raddb/mods-enabled/linelog
  linelog log_accounting {
  filename = "/var/log/radius/linelog-accounting"
  permissions = 384
  format = ""
  reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
  }
  # Loaded module rlm_logintime
  # Instantiating module "logintime" from file /etc/raddb/mods-enabled/
logintime
  logintime {
  minimum_timeout = 60
  }
  # Loaded module rlm_mschap
  # Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap
  mschap {
  use_mppe = yes
  require_encryption = no
  require_strong = no
  with_ntdomain_hack = yes
   passchange {
   }
  allow_retry = yes
  }
  # Instantiating module "ntlm_auth" from file
/etc/raddb/mods-enabled/ntlm_auth
  exec ntlm_auth {
  wait = yes
  program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN
--username=%{mschap:User-Name} --password=%{User-Password}"
  shell_escape = yes
  }
  # Loaded module rlm_pap
  # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap
  pap {
  normalise = yes
  }
  # Loaded module rlm_passwd
  # Instantiating module "etc_passwd" from file
/etc/raddb/mods-enabled/passwd
  passwd etc_passwd {
  filename = "/etc/passwd"
  format = "*User-Name:Crypt-Password:"
  delimiter = ":"
  ignore_nislike = no
  ignore_empty = yes
  allow_multiple_keys = no
  hash_size = 100
  }
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
  # Loaded module rlm_preprocess
  # Instantiating module "preprocess" from file
/etc/raddb/mods-enabled/preprocess
  preprocess {
  huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups"
  hints = "/etc/raddb/mods-config/preprocess/hints"
  with_ascend_hack = no
  ascend_channels_per_line = 23
  with_ntdomain_hack = no
  with_specialix_jetstream_hack = no
  with_cisco_vsa_hack = no
  with_alvarion_vsa_hack = no
  }
reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups
reading pairlist file /etc/raddb/mods-config/preprocess/hints
  # Loaded module rlm_radutmp
  # Instantiating module "radutmp" from file /etc/raddb/mods-enabled/
radutmp
  radutmp {
  filename = "/var/log/radius/radutmp"
  username = "%{User-Name}"
  case_sensitive = yes
  check_with_nas = yes
  permissions = 384
  caller_id = yes
  }
  # Loaded module rlm_realm
  # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm
  realm IPASS {
  format = "prefix"
  delimiter = "/"
  ignore_default = no
  ignore_null = no
  }
  # Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm
  realm suffix {
  format = "suffix"
  delimiter = "@"
  ignore_default = no
  ignore_null = no
  }
  # Instantiating module "realmpercent" from file
/etc/raddb/mods-enabled/realm
  realm realmpercent {
  format = "suffix"
  delimiter = "%"
  ignore_default = no
  ignore_null = no
  }
  # Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm
  realm ntdomain {
  format = "prefix"
  delimiter = "\"
  ignore_default = no
  ignore_null = no
  }
  # Loaded module rlm_replicate
  # Instantiating module "replicate" from file /etc/raddb/mods-enabled/
replicate
  # Loaded module rlm_soh
  # Instantiating module "soh" from file /etc/raddb/mods-enabled/soh
  soh {
  dhcp = yes
  }
  # Instantiating module "sradutmp" from file /etc/raddb/mods-enabled/
sradutmp
  radutmp sradutmp {
  filename = "/var/log/radius/sradutmp"
  username = "%{User-Name}"
  case_sensitive = yes
  check_with_nas = yes
  permissions = 420
  caller_id = no
  }
  # Loaded module rlm_unix
  # Instantiating module "unix" from file /etc/raddb/mods-enabled/unix
  unix {
  radwtmp = "/var/log/radius/radwtmp"
  }
  # Loaded module rlm_unpack
  # Instantiating module "unpack" from file /etc/raddb/mods-enabled/unpack
  # Loaded module rlm_utf8
  # Instantiating module "utf8" from file /etc/raddb/mods-enabled/utf8
 } # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/raddb/radiusd.conf
} # server
server default { # from file /etc/raddb/sites-enabled/default
 # Creating Auth-Type = digest
 # Loading authenticate {...}
 # Loading authorize {...}
Ignoring "sql" (see raddb/mods-available/README.rst)
Ignoring "ldap" (see raddb/mods-available/README.rst)
 # Loading preacct {...}
 # Loading accounting {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
} # server default
server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel
 # Loading authenticate {...}
 # Loading authorize {...}
 # Loading session {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
} # server inner-tunnel
radiusd: #### Opening IP addresses and Ports ####
listen {
  type = "auth"
  ipaddr = *
  port = 0
   limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
   }
}
listen {
  type = "acct"
  ipaddr = *
  port = 0
   limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
   }
}
listen {
  type = "auth"
  ipv6addr = ::
  port = 0
   limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
   }
}
listen {
  type = "acct"
  ipv6addr = ::
  port = 0
   limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
   }
}
listen {
  type = "auth"
  ipaddr = 127.0.0.1
  port = 18120
}
Listening on auth address * port 1812 as server default
Listening on acct address * port 1813 as server default
Listening on auth address :: port 1812 as server default
Listening on acct address :: port 1813 as server default
Listening on auth address 127.0.0.1 port 18120 as server inner-tunnel
Opening new proxy socket 'proxy address * port 0'
Listening on proxy address * port 36241
Ready to process requests
Received Access-Request Id 252 from 10.XX.XX.123:1645 to
10.XX.1.122:1812 length 164
User-Name = 'Matthew West'
Service-Type = Framed-User
Framed-MTU = 1500
Called-Station-Id = '08-CC-68-D5-1F-1E'
Calling-Station-Id = 'AC-87-A3-33-1A-79'
EAP-Message = 0x02010011014d6174746865772057657374
Message-Authenticator = 0xc8d04a388e3773fc85731ac1b373affb
NAS-Port-Type = Ethernet
NAS-Port = 50130
NAS-Port-Id = 'GigabitEthernet1/0/30'
NAS-IP-Address = 10.XX.XX.123
(0) Received Access-Request packet from host 10.XX.XX.123 port 1645,
id=252, length=164
(0) User-Name = 'Matthew West'
(0) Service-Type = Framed-User
(0) Framed-MTU = 1500
(0) Called-Station-Id = '08-CC-68-D5-1F-1E'
(0) Calling-Station-Id = 'AC-87-A3-33-1A-79'
(0) EAP-Message = 0x02010011014d6174746865772057657374
(0) Message-Authenticator = 0xc8d04a388e3773fc85731ac1b373affb
(0) NAS-Port-Type = Ethernet
(0) NAS-Port = 50130
(0) NAS-Port-Id = 'GigabitEthernet1/0/30'
(0) NAS-IP-Address = 10.XX.XX.123
(0) # Executing section authorize from file /etc/raddb/sites-enabled/
default
(0)   authorize {
(0)   filter_username filter_username {
(0)     if (!&User-Name)
(0)     if (!&User-Name)  -> FALSE
(0)     if (&User-Name =~ / /)
(0)     if (&User-Name =~ / /)  -> TRUE
(0)    if (&User-Name =~ / /)  {
(0)     update reply {
(0) Reply-Message += 'Rejected: Username contains whitespace'
(0)     } # update reply = noop
(0)     [reject] = reject
(0)    } # if (&User-Name =~ / /)  = reject
(0)   } # filter_username filter_username = reject
(0)  } #  authorize = reject
(0) Using Post-Auth-Type Reject
(0) # Executing group from file /etc/raddb/sites-enabled/default
(0)  Post-Auth-Type REJECT {
(0)  attr_filter.access_reject : EXPAND %{User-Name}
(0)  attr_filter.access_reject :    --> Matthew West
(0)  attr_filter.access_reject : Matched entry DEFAULT at line 11
(0)   [attr_filter.access_reject] = updated
(0)  eap : Request was previously rejected, inserting EAP-Failure
(0)   [eap] = updated
(0)   remove_reply_message_if_eap remove_reply_message_if_eap {
(0)     if (&reply:EAP-Message && &reply:Reply-Message)
(0)     if (&reply:EAP-Message && &reply:Reply-Message)  -> TRUE
(0)    if (&reply:EAP-Message && &reply:Reply-Message)  {
(0)     update reply {
(0) Reply-Message !* ANY
(0)     } # update reply = noop
(0)    } # if (&reply:EAP-Message && &reply:Reply-Message)  = noop
(0)     ... skipping else for request 0: Preceding "if" was taken
(0)   } # remove_reply_message_if_eap remove_reply_message_if_eap = noop
(0)  } # Post-Auth-Type REJECT = updated
(0) Delaying response for 1 seconds
Waking up in 0.3 seconds.
Waking up in 0.6 seconds.
(0) Sending delayed response
(0) Sending Access-Reject packet to host 10.XX.XX.123 port 1645,
id=252, length=0
(0) EAP-Message = 0x04010004
(0) Message-Authenticator = 0x00000000000000000000000000000000
Sending Access-Reject Id 252 from 10.XX.1.122:1812 to 10.XX.XX.123:1645
EAP-Message = 0x04010004
Message-Authenticator = 0x00000000000000000000000000000000
Waking up in 3.9 seconds.
(0) Cleaning up request packet ID 252 with timestamp +452
Ready to process requests
^C
[root@localhost ~]# radiusd -X
radiusd: FreeRADIUS Version 3.0.4, for host x86_64-redhat-linux-gnu,
built on Mar  5 2015 at 23:41:36
Copyright (C) 1999-2014 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/raddb/dictionary
including configuration file /etc/raddb/radiusd.conf
including configuration file /etc/raddb/proxy.conf
including configuration file /etc/raddb/clients.conf
including files in directory /etc/raddb/mods-enabled/
including configuration file /etc/raddb/mods-enabled/always
including configuration file /etc/raddb/mods-enabled/attr_filter
including configuration file /etc/raddb/mods-enabled/cache_eap
including configuration file /etc/raddb/mods-enabled/chap
including configuration file /etc/raddb/mods-enabled/detail
including configuration file /etc/raddb/mods-enabled/detail.log
including configuration file /etc/raddb/mods-enabled/dhcp
including configuration file /etc/raddb/mods-enabled/digest
including configuration file /etc/raddb/mods-enabled/dynamic_clients
including configuration file /etc/raddb/mods-enabled/eap
including configuration file /etc/raddb/mods-enabled/echo
including configuration file /etc/raddb/mods-enabled/exec
including configuration file /etc/raddb/mods-enabled/expiration
including configuration file /etc/raddb/mods-enabled/expr
including configuration file /etc/raddb/mods-enabled/files
including configuration file /etc/raddb/mods-enabled/linelog
including configuration file /etc/raddb/mods-enabled/logintime
including configuration file /etc/raddb/mods-enabled/mschap
including configuration file /etc/raddb/mods-enabled/ntlm_auth
including configuration file /etc/raddb/mods-enabled/pap
including configuration file /etc/raddb/mods-enabled/passwd
including configuration file /etc/raddb/mods-enabled/preprocess
including configuration file /etc/raddb/mods-enabled/radutmp
including configuration file /etc/raddb/mods-enabled/realm
including configuration file /etc/raddb/mods-enabled/replicate
including configuration file /etc/raddb/mods-enabled/soh
including configuration file /etc/raddb/mods-enabled/sradutmp
including configuration file /etc/raddb/mods-enabled/unix
including configuration file /etc/raddb/mods-enabled/unpack
including configuration file /etc/raddb/mods-enabled/utf8
including files in directory /etc/raddb/policy.d/
including configuration file /etc/raddb/policy.d/accounting
including configuration file /etc/raddb/policy.d/canonicalization
including configuration file /etc/raddb/policy.d/control
including configuration file /etc/raddb/policy.d/cui
including configuration file /etc/raddb/policy.d/debug
including configuration file /etc/raddb/policy.d/dhcp
including configuration file /etc/raddb/policy.d/eap
including configuration file /etc/raddb/policy.d/filter
including configuration file /etc/raddb/policy.d/operator-name
including configuration file /etc/raddb/policy.d/filter.org
including files in directory /etc/raddb/sites-enabled/
including configuration file /etc/raddb/sites-enabled/default
including configuration file /etc/raddb/sites-enabled/inner-tunnel
main {
 security {
  user = "radiusd"
  group = "radiusd"
  allow_core_dumps = no
 }
}
main {
name = "radiusd"
prefix = "/usr"
localstatedir = "/var"
sbindir = "/usr/sbin"
logdir = "/var/log/radius"
run_dir = "/var/run/radiusd"
libdir = "/usr/lib64/freeradius"
radacctdir = "/var/log/radius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 1024
pidfile = "/var/run/radiusd/radiusd.pid"
checkrad = "/usr/sbin/checkrad"
debug_level = 0
proxy_requests = yes
 log {
  stripped_names = no
  auth = no
  auth_badpass = no
  auth_goodpass = no
  colourise = yes
  msg_denied = "You are already logged in - access denied"
 }
 security {
  max_attributes = 200
  reject_delay = 1
  status_server = yes
 }
}
radiusd: #### Loading Realms and Home Servers ####
 proxy server {
  retry_delay = 5
  retry_count = 3
  default_fallback = no
  dead_time = 120
  wake_all_if_all_dead = no
 }
 home_server localhost {
  ipaddr = 127.0.0.1
  port = 1812
  type = "auth"
  secret = <<< secret >>>
  response_window = 20.000000
  response_timeouts = 1
  max_outstanding = 65536
  zombie_period = 40
  status_check = "status-server"
  ping_interval = 30
  check_interval = 30
  check_timeout = 4
  num_answers_to_alive = 3
  revive_interval = 120
  coa {
  irt = 2
  mrt = 16
  mrc = 5
  mrd = 30
  }
  limit {
  max_connections = 16
  max_requests = 0
  lifetime = 0
  idle_timeout = 0
  }
 }
 home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
 }
 realm example.com {
auth_pool = my_auth_failover
 }
 realm LOCAL {
 }
radiusd: #### Loading Clients ####
 client localhost {
  ipaddr = 127.0.0.1
  require_message_authenticator = no
  secret = <<< secret >>>
  nas_type = "other"
  proto = "*"
  limit {
  max_connections = 16
  lifetime = 0
  idle_timeout = 30
  }
 }
 client localhost_ipv6 {
  ipv6addr = ::1
  require_message_authenticator = no
  secret = <<< secret >>>
  limit {
  max_connections = 16
  lifetime = 0
  idle_timeout = 30
  }
 }
 client bea-corp-sw1 {
  ipaddr = 10.XX.XX.123
  require_message_authenticator = no
  secret = <<< secret >>>
  limit {
  max_connections = 16
  lifetime = 0
  idle_timeout = 30
  }
 }
radiusd: #### Instantiating modules ####
 instantiate {
 }
 modules {
  # Loaded module rlm_always
  # Instantiating module "reject" from file /etc/raddb/mods-enabled/always
  always reject {
  rcode = "reject"
  simulcount = 0
  mpp = no
  }
  # Instantiating module "fail" from file /etc/raddb/mods-enabled/always
  always fail {
  rcode = "fail"
  simulcount = 0
  mpp = no
  }
  # Instantiating module "ok" from file /etc/raddb/mods-enabled/always
  always ok {
  rcode = "ok"
  simulcount = 0
  mpp = no
  }
  # Instantiating module "handled" from file /etc/raddb/mods-enabled/always
  always handled {
  rcode = "handled"
  simulcount = 0
  mpp = no
  }
  # Instantiating module "invalid" from file /etc/raddb/mods-enabled/always
  always invalid {
  rcode = "invalid"
  simulcount = 0
  mpp = no
  }
  # Instantiating module "userlock" from file
/etc/raddb/mods-enabled/always
  always userlock {
  rcode = "userlock"
  simulcount = 0
  mpp = no
  }
  # Instantiating module "notfound" from file
/etc/raddb/mods-enabled/always
  always notfound {
  rcode = "notfound"
  simulcount = 0
  mpp = no
  }
  # Instantiating module "noop" from file /etc/raddb/mods-enabled/always
  always noop {
  rcode = "noop"
  simulcount = 0
  mpp = no
  }
  # Instantiating module "updated" from file /etc/raddb/mods-enabled/always
  always updated {
  rcode = "updated"
  simulcount = 0
  mpp = no
  }
  # Loaded module rlm_attr_filter
  # Instantiating module "attr_filter.post-proxy" from file
/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.post-proxy {
  filename = "/etc/raddb/mods-config/attr_filter/post-proxy"
  key = "%{Realm}"
  relaxed = no
  }
reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy
  # Instantiating module "attr_filter.pre-proxy" from file
/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.pre-proxy {
  filename = "/etc/raddb/mods-config/attr_filter/pre-proxy"
  key = "%{Realm}"
  relaxed = no
  }
reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy
  # Instantiating module "attr_filter.access_reject" from file
/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.access_reject {
  filename = "/etc/raddb/mods-config/attr_filter/access_reject"
  key = "%{User-Name}"
  relaxed = no
  }
reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject
  # Instantiating module "attr_filter.access_challenge" from file
/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.access_challenge {
  filename = "/etc/raddb/mods-config/attr_filter/access_challenge"
  key = "%{User-Name}"
  relaxed = no
  }
reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge
  # Instantiating module "attr_filter.accounting_response" from file
/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.accounting_response {
  filename = "/etc/raddb/mods-config/attr_filter/accounting_response"
  key = "%{User-Name}"
  relaxed = no
  }
reading pairlist file /etc/raddb/mods-config/attr_
filter/accounting_response
  # Loaded module rlm_cache
  # Instantiating module "cache_eap" from file
/etc/raddb/mods-enabled/cache_eap
  cache cache_eap {
  key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
  ttl = 15
  max_entries = 16384
  epoch = 0
  add_stats = no
  }
  # Loaded module rlm_chap
  # Instantiating module "chap" from file /etc/raddb/mods-enabled/chap
  # Loaded module rlm_detail
  # Instantiating module "detail" from file /etc/raddb/mods-enabled/detail
  detail {
  filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{
Packet-Src-IPv6-Address}}/detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  log_packet_header = no
  }
  # Instantiating module "auth_log" from file /etc/raddb/mods-enabled/
detail.log
  detail auth_log {
  filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{
Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  log_packet_header = no
  }
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
detail output
  # Instantiating module "reply_log" from file
/etc/raddb/mods-enabled/detail.log
  detail reply_log {
  filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{
Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  log_packet_header = no
  }
  # Instantiating module "pre_proxy_log" from file
/etc/raddb/mods-enabled/detail.log
  detail pre_proxy_log {
  filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{
Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  log_packet_header = no
  }
  # Instantiating module "post_proxy_log" from file
/etc/raddb/mods-enabled/detail.log
  detail post_proxy_log {
  filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{
Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  log_packet_header = no
  }
  # Loaded module rlm_dhcp
  # Instantiating module "dhcp" from file /etc/raddb/mods-enabled/dhcp
  # Loaded module rlm_digest
  # Instantiating module "digest" from file /etc/raddb/mods-enabled/digest
  # Loaded module rlm_dynamic_clients
  # Instantiating module "dynamic_clients" from file
/etc/raddb/mods-enabled/dynamic_clients
  # Loaded module rlm_eap
  # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap
  eap {
  default_eap_type = "md5"
  timer_expire = 60
  ignore_unknown_eap_types = no
  mod_accounting_username_bug = no
  max_sessions = 1024
  }
   # Linked to sub-module rlm_eap_md5
   # Linked to sub-module rlm_eap_leap
   # Linked to sub-module rlm_eap_gtc
   gtc {
    challenge = "Password: "
    auth_type = "PAP"
   }
   # Linked to sub-module rlm_eap_tls
   tls {
    tls = "tls-common"
   }
   tls-config tls-common {
    rsa_key_exchange = no
    dh_key_exchange = yes
    rsa_key_length = 512
    dh_key_length = 512
    verify_depth = 0
    ca_path = "/etc/raddb/certs"
    pem_file_type = yes
    private_key_file = "/etc/raddb/certs/server.pem"
    certificate_file = "/etc/raddb/certs/server.pem"
    ca_file = "/etc/raddb/certs/ACME_bundle.crt"
    private_key_password = <<< secret >>>
    dh_file = "/etc/raddb/certs/dh"
    fragment_size = 1024
    include_length = yes
    check_crl = no
    cipher_list = "DEFAULT"
    ecdh_curve = "prime256v1"
    cache {
    enable = yes
    lifetime = 24
    max_entries = 255
    }
    verify {
    }
    ocsp {
    enable = no
    override_cert_url = yes
    url = "http://127.0.0.1/ocsp/"
    use_nonce = yes
    timeout = 0
    softfail = yes
    }
   }
   # Linked to sub-module rlm_eap_ttls
   ttls {
    tls = "tls-common"
    default_eap_type = "md5"
    copy_request_to_tunnel = no
    use_tunneled_reply = no
    virtual_server = "inner-tunnel"
    include_length = yes
    require_client_cert = no
   }
Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_peap
   peap {
    tls = "tls-common"
    default_method = "mschapv2"
    copy_request_to_tunnel = no
    use_tunneled_reply = no
    proxy_tunneled_request_as_eap = yes
    virtual_server = "inner-tunnel"
    soh = no
    require_client_cert = no
   }
Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_mschapv2
   mschapv2 {
    with_ntdomain_hack = no
    send_error = no
   }
  # Loaded module rlm_exec
  # Instantiating module "echo" from file /etc/raddb/mods-enabled/echo
  exec echo {
  wait = yes
  program = "/bin/echo %{User-Name}"
  input_pairs = "request"
  output_pairs = "reply"
  shell_escape = yes
  }
  # Instantiating module "exec" from file /etc/raddb/mods-enabled/exec
  exec {
  wait = no
  input_pairs = "request"
  shell_escape = yes
  timeout = 10
  }
  # Loaded module rlm_expiration
  # Instantiating module "expiration" from file
/etc/raddb/mods-enabled/expiration
  # Loaded module rlm_expr
  # Instantiating module "expr" from file /etc/raddb/mods-enabled/expr
  expr {
  safe_characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
/"
  }
  # Loaded module rlm_files
  # Instantiating module "files" from file /etc/raddb/mods-enabled/files
  files {
  filename = "/etc/raddb/mods-config/files/authorize"
  usersfile = "/etc/raddb/mods-config/files/authorize"
  acctusersfile = "/etc/raddb/mods-config/files/accounting"
  preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy"
  compat = "cistron"
  }
reading pairlist file /etc/raddb/mods-config/files/authorize
[/etc/raddb/mods-config/files/authorize]:87 Cistron compatibility
checks for entry bob ...
[/etc/raddb/mods-config/files/authorize]:181 Cistron compatibility
checks for entry DEFAULT ...
[/etc/raddb/mods-config/files/authorize]:188 Cistron compatibility
checks for entry DEFAULT ...
[/etc/raddb/mods-config/files/authorize]:195 Cistron compatibility
checks for entry DEFAULT ...
reading pairlist file /etc/raddb/mods-config/files/authorize
[/etc/raddb/mods-config/files/authorize]:87 Cistron compatibility
checks for entry bob ...
[/etc/raddb/mods-config/files/authorize]:181 Cistron compatibility
checks for entry DEFAULT ...
[/etc/raddb/mods-config/files/authorize]:188 Cistron compatibility
checks for entry DEFAULT ...
[/etc/raddb/mods-config/files/authorize]:195 Cistron compatibility
checks for entry DEFAULT ...
reading pairlist file /etc/raddb/mods-config/files/accounting
reading pairlist file /etc/raddb/mods-config/files/pre-proxy
  # Loaded module rlm_linelog
  # Instantiating module "linelog" from file /etc/raddb/mods-enabled/
linelog
  linelog {
  filename = "/var/log/radius/linelog"
  permissions = 384
  format = "This is a log message for %{User-Name}"
  reference = "messages.%{%{Packet-Type}:-default}"
  }
  # Instantiating module "log_accounting" from file
/etc/raddb/mods-enabled/linelog
  linelog log_accounting {
  filename = "/var/log/radius/linelog-accounting"
  permissions = 384
  format = ""
  reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
  }
  # Loaded module rlm_logintime
  # Instantiating module "logintime" from file /etc/raddb/mods-enabled/
logintime
  logintime {
  minimum_timeout = 60
  }
  # Loaded module rlm_mschap
  # Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap
  mschap {
  use_mppe = yes
  require_encryption = no
  require_strong = no
  with_ntdomain_hack = yes
   passchange {
   }
  allow_retry = yes
  }
  # Instantiating module "ntlm_auth" from file
/etc/raddb/mods-enabled/ntlm_auth
  exec ntlm_auth {
  wait = yes
  program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN
--username=%{mschap:User-Name} --password=%{User-Password}"
  shell_escape = yes
  }
  # Loaded module rlm_pap
  # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap
  pap {
  normalise = yes
  }
  # Loaded module rlm_passwd
  # Instantiating module "etc_passwd" from file
/etc/raddb/mods-enabled/passwd
  passwd etc_passwd {
  filename = "/etc/passwd"
  format = "*User-Name:Crypt-Password:"
  delimiter = ":"
  ignore_nislike = no
  ignore_empty = yes
  allow_multiple_keys = no
  hash_size = 100
  }
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
  # Loaded module rlm_preprocess
  # Instantiating module "preprocess" from file
/etc/raddb/mods-enabled/preprocess
  preprocess {
  huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups"
  hints = "/etc/raddb/mods-config/preprocess/hints"
  with_ascend_hack = no
  ascend_channels_per_line = 23
  with_ntdomain_hack = no
  with_specialix_jetstream_hack = no
  with_cisco_vsa_hack = no
  with_alvarion_vsa_hack = no
  }
reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups
reading pairlist file /etc/raddb/mods-config/preprocess/hints
  # Loaded module rlm_radutmp
  # Instantiating module "radutmp" from file /etc/raddb/mods-enabled/
radutmp
  radutmp {
  filename = "/var/log/radius/radutmp"
  username = "%{User-Name}"
  case_sensitive = yes
  check_with_nas = yes
  permissions = 384
  caller_id = yes
  }
  # Loaded module rlm_realm
  # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm
  realm IPASS {
  format = "prefix"
  delimiter = "/"
  ignore_default = no
  ignore_null = no
  }
  # Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm
  realm suffix {
  format = "suffix"
  delimiter = "@"
  ignore_default = no
  ignore_null = no
  }
  # Instantiating module "realmpercent" from file
/etc/raddb/mods-enabled/realm
  realm realmpercent {
  format = "suffix"
  delimiter = "%"
  ignore_default = no
  ignore_null = no
  }
  # Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm
  realm ntdomain {
  format = "prefix"
  delimiter = "\"
  ignore_default = no
  ignore_null = no
  }
  # Loaded module rlm_replicate
  # Instantiating module "replicate" from file /etc/raddb/mods-enabled/
replicate
  # Loaded module rlm_soh
  # Instantiating module "soh" from file /etc/raddb/mods-enabled/soh
  soh {
  dhcp = yes
  }
  # Instantiating module "sradutmp" from file /etc/raddb/mods-enabled/
sradutmp
  radutmp sradutmp {
  filename = "/var/log/radius/sradutmp"
  username = "%{User-Name}"
  case_sensitive = yes
  check_with_nas = yes
  permissions = 420
  caller_id = no
  }
  # Loaded module rlm_unix
  # Instantiating module "unix" from file /etc/raddb/mods-enabled/unix
  unix {
  radwtmp = "/var/log/radius/radwtmp"
  }
  # Loaded module rlm_unpack
  # Instantiating module "unpack" from file /etc/raddb/mods-enabled/unpack
  # Loaded module rlm_utf8
  # Instantiating module "utf8" from file /etc/raddb/mods-enabled/utf8
 } # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/raddb/radiusd.conf
} # server
server default { # from file /etc/raddb/sites-enabled/default
 # Creating Auth-Type = digest
 # Loading authenticate {...}
 # Loading authorize {...}
Ignoring "sql" (see raddb/mods-available/README.rst)
Ignoring "ldap" (see raddb/mods-available/README.rst)
 # Loading preacct {...}
 # Loading accounting {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
} # server default
server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel
 # Loading authenticate {...}
 # Loading authorize {...}
 # Loading session {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
} # server inner-tunnel
radiusd: #### Opening IP addresses and Ports ####
listen {
  type = "auth"
  ipaddr = *
  port = 0
   limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
   }
}
listen {
  type = "acct"
  ipaddr = *
  port = 0
   limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
   }
}
listen {
  type = "auth"
  ipv6addr = ::
  port = 0
   limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
   }
}
listen {
  type = "acct"
  ipv6addr = ::
  port = 0
   limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
   }
}
listen {
  type = "auth"
  ipaddr = 127.0.0.1
  port = 18120
}
Listening on auth address * port 1812 as server default
Listening on acct address * port 1813 as server default
Listening on auth address :: port 1812 as server default
Listening on acct address :: port 1813 as server default
Listening on auth address 127.0.0.1 port 18120 as server inner-tunnel
Opening new proxy socket 'proxy address * port 0'
Listening on proxy address * port 40645
Ready to process requests
Received Access-Request Id 253 from 10.XX.XX.123:1645 to
10.XX.1.122:1812 length 164
User-Name = 'Matthew West'
Service-Type = Framed-User
Framed-MTU = 1500
Called-Station-Id = '08-CC-68-D5-1F-1E'
Calling-Station-Id = 'AC-87-A3-33-1A-79'
EAP-Message = 0x02010011014d6174746865772057657374
Message-Authenticator = 0xc7fe26226e97047711b491c9d8bd0d26
NAS-Port-Type = Ethernet
NAS-Port = 50130
NAS-Port-Id = 'GigabitEthernet1/0/30'
NAS-IP-Address = 10.XX.XX.123
(0) Received Access-Request packet from host 10.XX.XX.123 port 1645,
id=253, length=164
(0) User-Name = 'Matthew West'
(0) Service-Type = Framed-User
(0) Framed-MTU = 1500
(0) Called-Station-Id = '08-CC-68-D5-1F-1E'
(0) Calling-Station-Id = 'AC-87-A3-33-1A-79'
(0) EAP-Message = 0x02010011014d6174746865772057657374
(0) Message-Authenticator = 0xc7fe26226e97047711b491c9d8bd0d26
(0) NAS-Port-Type = Ethernet
(0) NAS-Port = 50130
(0) NAS-Port-Id = 'GigabitEthernet1/0/30'
(0) NAS-IP-Address = 10.XX.XX.123
(0) # Executing section authorize from file /etc/raddb/sites-enabled/
default
(0)   authorize {
(0)   filter_username filter_username {
(0)     if (!&User-Name)
(0)     if (!&User-Name)  -> FALSE
(0)     if (&User-Name =~ /@.*@/ )
(0)     if (&User-Name =~ /@.*@/ )  -> FALSE
(0)     if (&User-Name =~ /\\.\\./ )
(0)     if (&User-Name =~ /\\.\\./ )  -> FALSE
(0)     if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/))
(0)     if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/))   ->
FALSE
(0)     if (&User-Name =~ /\\.$/)
(0)     if (&User-Name =~ /\\.$/)   -> FALSE
(0)     if (&User-Name =~ /@\\./)
(0)     if (&User-Name =~ /@\\./)   -> FALSE
(0)   } # filter_username filter_username = notfound
(0)   [preprocess] = ok
(0)   [chap] = noop
(0)   [mschap] = noop
(0)   [digest] = noop
(0)  suffix : Checking for suffix after "@"
(0)  suffix : No '@' in User-Name = "Matthew West", looking up realm NULL
(0)  suffix : No such realm "NULL"
(0)   [suffix] = noop
(0)  eap : Peer sent code Response (2) ID 1 length 17
(0)  eap : EAP-Identity reply, returning 'ok' so we can short-circuit
the rest of authorize
(0)   [eap] = ok
(0)  } #  authorize = ok
(0) Found Auth-Type = EAP
(0) # Executing group from file /etc/raddb/sites-enabled/default
(0)   authenticate {
(0)  eap : Peer sent method Identity (1)
(0)  eap : Calling eap_md5 to process EAP data
(0)  eap_md5 : Issuing MD5 Challenge
(0)  eap : New EAP session, adding 'State' attribute to reply
0xf04fa9faf04dad23
(0)   [eap] = handled
(0)  } #  authenticate = handled
(0) Sending Access-Challenge packet to host 10.XX.XX.123 port 1645,
id=253, length=0
(0) EAP-Message = 0x0102001604107696cc35fda607f796d9f56764633c0a
(0) Message-Authenticator = 0x00000000000000000000000000000000
(0) State = 0xf04fa9faf04dad23abe4e4c6bbb3ee47
Sending Access-Challenge Id 253 from 10.XX.1.122:1812 to 10.XX.XX.123:1645
EAP-Message = 0x0102001604107696cc35fda607f796d9f56764633c0a
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xf04fa9faf04dad23abe4e4c6bbb3ee47
(0) Finished request
Waking up in 0.3 seconds.
Received Access-Request Id 254 from 10.XX.XX.123:1645 to
10.XX.1.122:1812 length 171
User-Name = 'Matthew West'
Service-Type = Framed-User
Framed-MTU = 1500
Called-Station-Id = '08-CC-68-D5-1F-1E'
Calling-Station-Id = 'AC-87-A3-33-1A-79'
EAP-Message = 0x02020006030d
Message-Authenticator = 0xacd6de673336f50f0d2c8815f239ed86
NAS-Port-Type = Ethernet
NAS-Port = 50130
NAS-Port-Id = 'GigabitEthernet1/0/30'
State = 0xf04fa9faf04dad23abe4e4c6bbb3ee47
NAS-IP-Address = 10.XX.XX.123
(1) Received Access-Request packet from host 10.XX.XX.123 port 1645,
id=254, length=171
(1) User-Name = 'Matthew West'
(1) Service-Type = Framed-User
(1) Framed-MTU = 1500
(1) Called-Station-Id = '08-CC-68-D5-1F-1E'
(1) Calling-Station-Id = 'AC-87-A3-33-1A-79'
(1) EAP-Message = 0x02020006030d
(1) Message-Authenticator = 0xacd6de673336f50f0d2c8815f239ed86
(1) NAS-Port-Type = Ethernet
(1) NAS-Port = 50130
(1) NAS-Port-Id = 'GigabitEthernet1/0/30'
(1) State = 0xf04fa9faf04dad23abe4e4c6bbb3ee47
(1) NAS-IP-Address = 10.XX.XX.123
(1) # Executing section authorize from file /etc/raddb/sites-enabled/
default
(1)   authorize {
(1)   filter_username filter_username {
(1)     if (!&User-Name)
(1)     if (!&User-Name)  -> FALSE
(1)     if (&User-Name =~ /@.*@/ )
(1)     if (&User-Name =~ /@.*@/ )  -> FALSE
(1)     if (&User-Name =~ /\\.\\./ )
(1)     if (&User-Name =~ /\\.\\./ )  -> FALSE
(1)     if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/))
(1)     if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/))   ->
FALSE
(1)     if (&User-Name =~ /\\.$/)
(1)     if (&User-Name =~ /\\.$/)   -> FALSE
(1)     if (&User-Name =~ /@\\./)
(1)     if (&User-Name =~ /@\\./)   -> FALSE
(1)   } # filter_username filter_username = notfound
(1)   [preprocess] = ok
(1)   [chap] = noop
(1)   [mschap] = noop
(1)   [digest] = noop
(1)  suffix : Checking for suffix after "@"
(1)  suffix : No '@' in User-Name = "Matthew West", looking up realm NULL
(1)  suffix : No such realm "NULL"
(1)   [suffix] = noop
(1)  eap : Peer sent code Response (2) ID 2 length 6
(1)  eap : No EAP Start, assuming it's an on-going EAP conversation
(1)   [eap] = updated
(1)   [files] = noop
(1)   [expiration] = noop
(1)   [logintime] = noop
(1)  WARNING: pap : No "known good" password found for the user.  Not
setting Auth-Type
(1)  WARNING: pap : Authentication will fail unless a "known good"
password is available
(1)   [pap] = noop
(1)  } #  authorize = updated
(1) Found Auth-Type = EAP
(1) # Executing group from file /etc/raddb/sites-enabled/default
(1)   authenticate {
(1)  eap : Expiring EAP session with state 0xf04fa9faf04dad23
(1)  eap : Finished EAP session with state 0xf04fa9faf04dad23
(1)  eap : Previous EAP request found for state 0xf04fa9faf04dad23,
released from the list
(1)  eap : Peer sent method NAK (3)
(1)  eap : Found mutually acceptable type TLS (13)
(1)  eap : Calling eap_tls to process EAP data
(1)  eap_tls : Flushing SSL sessions (of #0)
(1)  eap_tls : Requiring client certificate
(1)  eap_tls : Initiate
(1)  eap_tls : Requiring client certificate
(1)  eap_tls : Start returned 1
(1)  eap : New EAP session, adding 'State' attribute to reply
0xf04fa9faf14ca423
(1)   [eap] = handled
(1)  } #  authenticate = handled
(1) Sending Access-Challenge packet to host 10.XX.XX.123 port 1645,
id=254, length=0
(1) EAP-Message = 0x010300060d20
(1) Message-Authenticator = 0x00000000000000000000000000000000
(1) State = 0xf04fa9faf14ca423abe4e4c6bbb3ee47
Sending Access-Challenge Id 254 from 10.XX.1.122:1812 to 10.XX.XX.123:1645
EAP-Message = 0x010300060d20
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xf04fa9faf14ca423abe4e4c6bbb3ee47
(1) Finished request
Waking up in 0.3 seconds.
Received Access-Request Id 255 from 10.XX.XX.123:1645 to
10.XX.1.122:1812 length 296
User-Name = 'Matthew West'
Service-Type = Framed-User
Framed-MTU = 1500
Called-Station-Id = '08-CC-68-D5-1F-1E'
Calling-Station-Id = 'AC-87-A3-33-1A-79'
EAP-Message = 0x020300830d8000000079160301007401000070030157d1d43ecd441f11
5e1ec3d0d32af15b2732f7a02aa95c91b6a650966deab46b00002800ffc0
24c023c00ac009c008c028c027c014c013c012003d003c0035002f000ac0
07c011000500040100001f000a00080006001700180019000b0002010000
050005010000000000120000
Message-Authenticator = 0x17619e18afe17fe418be4de2dc0e6b6c
NAS-Port-Type = Ethernet
NAS-Port = 50130
NAS-Port-Id = 'GigabitEthernet1/0/30'
State = 0xf04fa9faf14ca423abe4e4c6bbb3ee47
NAS-IP-Address = 10.XX.XX.123
(2) Received Access-Request packet from host 10.XX.XX.123 port 1645,
id=255, length=296
(2) User-Name = 'Matthew West'
(2) Service-Type = Framed-User
(2) Framed-MTU = 1500
(2) Called-Station-Id = '08-CC-68-D5-1F-1E'
(2) Calling-Station-Id = 'AC-87-A3-33-1A-79'
(2) EAP-Message =
0x020300830d8000000079160301007401000070030157d1d43ecd441f11
5e1ec3d0d32af15b2732f7a02aa95c91b6a650966deab46b00002800ffc0
24c023c00ac009c008c028c027c014c013c012003d003c0035002f000ac0
07c011000500040100001f000a00080006001700180019000b0002010000
050005010000000000120000
(2) Message-Authenticator = 0x17619e18afe17fe418be4de2dc0e6b6c
(2) NAS-Port-Type = Ethernet
(2) NAS-Port = 50130
(2) NAS-Port-Id = 'GigabitEthernet1/0/30'
(2) State = 0xf04fa9faf14ca423abe4e4c6bbb3ee47
(2) NAS-IP-Address = 10.XX.XX.123
(2) # Executing section authorize from file /etc/raddb/sites-enabled/
default
(2)   authorize {
(2)   filter_username filter_username {
(2)     if (!&User-Name)
(2)     if (!&User-Name)  -> FALSE
(2)     if (&User-Name =~ /@.*@/ )
(2)     if (&User-Name =~ /@.*@/ )  -> FALSE
(2)     if (&User-Name =~ /\\.\\./ )
(2)     if (&User-Name =~ /\\.\\./ )  -> FALSE
(2)     if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/))
(2)     if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/))   ->
FALSE
(2)     if (&User-Name =~ /\\.$/)
(2)     if (&User-Name =~ /\\.$/)   -> FALSE
(2)     if (&User-Name =~ /@\\./)
(2)     if (&User-Name =~ /@\\./)   -> FALSE
(2)   } # filter_username filter_username = notfound
(2)   [preprocess] = ok
(2)   [chap] = noop
(2)   [mschap] = noop
(2)   [digest] = noop
(2)  suffix : Checking for suffix after "@"
(2)  suffix : No '@' in User-Name = "Matthew West", looking up realm NULL
(2)  suffix : No such realm "NULL"
(2)   [suffix] = noop
(2)  eap : Peer sent code Response (2) ID 3 length 131
(2)  eap : No EAP Start, assuming it's an on-going EAP conversation
(2)   [eap] = updated
(2)   [files] = noop
(2)   [expiration] = noop
(2)   [logintime] = noop
(2)   [pap] = noop
(2)  } #  authorize = updated
(2) Found Auth-Type = EAP
(2) # Executing group from file /etc/raddb/sites-enabled/default
(2)   authenticate {
(2)  eap : Expiring EAP session with state 0xf04fa9faf14ca423
(2)  eap : Finished EAP session with state 0xf04fa9faf14ca423
(2)  eap : Previous EAP request found for state 0xf04fa9faf14ca423,
released from the list
(2)  eap : Peer sent method TLS (13)
(2)  eap : EAP TLS (13)
(2)  eap : Calling eap_tls to process EAP data
(2)  eap_tls : Authenticate
(2)  eap_tls : processing EAP-TLS
  TLS Length 121
(2)  eap_tls : Length Included
(2)  eap_tls : eaptls_verify returned 11
(2)  eap_tls : (other): before/accept initialization
(2)  eap_tls : TLS_accept: before/accept initialization
(2)  eap_tls : <<< TLS 1.0 Handshake [length 0074], ClientHello
(2)  eap_tls : TLS_accept: SSLv3 read client hello A
(2)  eap_tls : >>> TLS 1.0 Handshake [length 0059], ServerHello
(2)  eap_tls : TLS_accept: SSLv3 write server hello A
(2)  eap_tls : >>> TLS 1.0 Handshake [length 0402], Certificate
(2)  eap_tls : TLS_accept: SSLv3 write certificate A
(2)  eap_tls : >>> TLS 1.0 Handshake [length 014b], ServerKeyExchange
(2)  eap_tls : TLS_accept: SSLv3 write key exchange A
(2)  eap_tls : >>> TLS 1.0 Handshake [length 0271], CertificateRequest
(2)  eap_tls : TLS_accept: SSLv3 write certificate request A
(2)  eap_tls : TLS_accept: SSLv3 flush data
(2)  eap_tls : TLS_accept: Need to read more data: SSLv3 read client
certificate A
In SSL Handshake Phase
In SSL Accept mode
(2)  eap_tls : eaptls_process returned 13
(2)  eap : New EAP session, adding 'State' attribute to reply
0xf04fa9faf24ba423
(2)   [eap] = handled
(2)  } #  authenticate = handled
(2) Sending Access-Challenge packet to host 10.XX.XX.123 port 1645,
id=255, length=0
(2) EAP-Message =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(2) Message-Authenticator = 0x00000000000000000000000000000000
(2) State = 0xf04fa9faf24ba423abe4e4c6bbb3ee47
Sending Access-Challenge Id 255 from 10.XX.1.122:1812 to 10.XX.XX.123:1645
EAP-Message = 0x010403ec0dc00000082b160301005902000055030157d1dd45939c6a0d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Message-Authenticator = 0x00000000000000000000000000000000
State = 0xf04fa9faf24ba423abe4e4c6bbb3ee47
(2) Finished request
Waking up in 0.2 seconds.
Received Access-Request Id 0 from 10.XX.XX.123:1645 to
10.XX.1.122:1812 length 171
User-Name = 'Matthew West'
Service-Type = Framed-User
Framed-MTU = 1500
Called-Station-Id = '08-CC-68-D5-1F-1E'
Calling-Station-Id = 'AC-87-A3-33-1A-79'
EAP-Message = 0x020400060d00
Message-Authenticator = 0x16b86af565c700bc0d41743b8488b786
NAS-Port-Type = Ethernet
NAS-Port = 50130
NAS-Port-Id = 'GigabitEthernet1/0/30'
State = 0xf04fa9faf24ba423abe4e4c6bbb3ee47
NAS-IP-Address = 10.XX.XX.123
(3) Received Access-Request packet from host 10.XX.XX.123 port 1645,
id=0, length=171
(3) User-Name = 'Matthew West'
(3) Service-Type = Framed-User
(3) Framed-MTU = 1500
(3) Called-Station-Id = '08-CC-68-D5-1F-1E'
(3) Calling-Station-Id = 'AC-87-A3-33-1A-79'
(3) EAP-Message = 0x020400060d00
(3) Message-Authenticator = 0x16b86af565c700bc0d41743b8488b786
(3) NAS-Port-Type = Ethernet
(3) NAS-Port = 50130
(3) NAS-Port-Id = 'GigabitEthernet1/0/30'
(3) State = 0xf04fa9faf24ba423abe4e4c6bbb3ee47
(3) NAS-IP-Address = 10.XX.XX.123
(3) # Executing section authorize from file /etc/raddb/sites-enabled/
default
(3)   authorize {
(3)   filter_username filter_username {
(3)     if (!&User-Name)
(3)     if (!&User-Name)  -> FALSE
(3)     if (&User-Name =~ /@.*@/ )
(3)     if (&User-Name =~ /@.*@/ )  -> FALSE
(3)     if (&User-Name =~ /\\.\\./ )
(3)     if (&User-Name =~ /\\.\\./ )  -> FALSE
(3)     if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/))
(3)     if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/))   ->
FALSE
(3)     if (&User-Name =~ /\\.$/)
(3)     if (&User-Name =~ /\\.$/)   -> FALSE
(3)     if (&User-Name =~ /@\\./)
(3)     if (&User-Name =~ /@\\./)   -> FALSE
(3)   } # filter_username filter_username = notfound
(3)   [preprocess] = ok
(3)   [chap] = noop
(3)   [mschap] = noop
(3)   [digest] = noop
(3)  suffix : Checking for suffix after "@"
(3)  suffix : No '@' in User-Name = "Matthew West", looking up realm NULL
(3)  suffix : No such realm "NULL"
(3)   [suffix] = noop
(3)  eap : Peer sent code Response (2) ID 4 length 6
(3)  eap : No EAP Start, assuming it's an on-going EAP conversation
(3)   [eap] = updated
(3)   [files] = noop
(3)   [expiration] = noop
(3)   [logintime] = noop
(3)   [pap] = noop
(3)  } #  authorize = updated
(3) Found Auth-Type = EAP
(3) # Executing group from file /etc/raddb/sites-enabled/default
(3)   authenticate {
(3)  eap : Expiring EAP session with state 0xf04fa9faf24ba423
(3)  eap : Finished EAP session with state 0xf04fa9faf24ba423
(3)  eap : Previous EAP request found for state 0xf04fa9faf24ba423,
released from the list
(3)  eap : Peer sent method TLS (13)
(3)  eap : EAP TLS (13)
(3)  eap : Calling eap_tls to process EAP data
(3)  eap_tls : Authenticate
(3)  eap_tls : processing EAP-TLS
(3)  eap_tls : Received TLS ACK
(3)  eap_tls : Received TLS ACK
(3)  eap_tls : ACK handshake fragment handler
(3)  eap_tls : eaptls_verify returned 1
(3)  eap_tls : eaptls_process returned 13
(3)  eap : New EAP session, adding 'State' attribute to reply
0xf04fa9faf34aa423
(3)   [eap] = handled
(3)  } #  authenticate = handled
(3) Sending Access-Challenge packet to host 10.XX.XX.123 port 1645,
id=0, length=0
(3) EAP-Message =
0x010503ec0dc00000082b5ee1c1ab239ed57b2f29a51baf9fbfe11b4ebd
5bc986dc68e3b1fcebc84871c519bc6347fbdb68e28e9acd35ce8c320f66
f5cb8c6d1a7aed531bdd6530de8526ff4ff9ee80e56a3f06c9cc0bfef80a
f9b7d8d8f6f9fa3bc4b2b50d3cd7f2fbd779eaf073f825ff380eecbde5ee
e5a2894df8951bba9fd60efc4607dd44c38cceaeafa5160301014b0c0001
470300174104a7f3beccef41cd20bee3a8a252e95b3ab602b93b01baa9ba
5c67a159fda5c425c838227afc8452a03da60e05fac53cac088982f9a76d
c45b64fce41a5a267b4d01008eceb7a7da1ee40ce5617fc94e869e7985be
ec747fbcffc58b5e8bb89cd351c446bc0cdb4f3bcc3f8e630c92a6159fa4
12243dc0850ea3581e8089b9a1f70bc4cc26b3add6a14eb2d8b1bccb24d3
348b5a45fa66218f663d53d37baf7150c75eaf73e73e6552bb92feb392c1
2b8feb8fb102ebf20078d9c9b0f3cef84d366586c9378ff17ffdd144c973
d1f31056719919722e2c258d06a8a75b9871cbaa34e352f99b24d46f4e61
2f928255af17ed4e8906610b7ad1cff4ada2a9bd1145b478a2de7c8d0336
7c709c2a02077899822a7cde6f025ffb542e76dfe9be99ce43f9217d553f
0484f9442b5e6a0e56f002ee768eb8849183983e63aa047d8b30f6281603
0102710d00026903010240026300cd3081ca310b30090603
(3) Message-Authenticator = 0x00000000000000000000000000000000
(3) State = 0xf04fa9faf34aa423abe4e4c6bbb3ee47
Sending Access-Challenge Id 0 from 10.XX.1.122:1812 to 10.XX.XX.123:1645
EAP-Message = 0x010503ec0dc00000082b5ee1c1ab239ed57b2f29a51baf9fbfe11b4ebd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Message-Authenticator = 0x00000000000000000000000000000000
State = 0xf04fa9faf34aa423abe4e4c6bbb3ee47
(3) Finished request
Waking up in 0.2 seconds.
Received Access-Request Id 1 from 10.XX.XX.123:1645 to
10.XX.1.122:1812 length 171
User-Name = 'Matthew West'
Service-Type = Framed-User
Framed-MTU = 1500
Called-Station-Id = '08-CC-68-D5-1F-1E'
Calling-Station-Id = 'AC-87-A3-33-1A-79'
EAP-Message = 0x020500060d00
Message-Authenticator = 0x133f34dea4e06a2142cd418cecc88484
NAS-Port-Type = Ethernet
NAS-Port = 50130
NAS-Port-Id = 'GigabitEthernet1/0/30'
State = 0xf04fa9faf34aa423abe4e4c6bbb3ee47
NAS-IP-Address = 10.XX.XX.123
(4) Received Access-Request packet from host 10.XX.XX.123 port 1645,
id=1, length=171
(4) User-Name = 'Matthew West'
(4) Service-Type = Framed-User
(4) Framed-MTU = 1500
(4) Called-Station-Id = '08-CC-68-D5-1F-1E'
(4) Calling-Station-Id = 'AC-87-A3-33-1A-79'
(4) EAP-Message = 0x020500060d00
(4) Message-Authenticator = 0x133f34dea4e06a2142cd418cecc88484
(4) NAS-Port-Type = Ethernet
(4) NAS-Port = 50130
(4) NAS-Port-Id = 'GigabitEthernet1/0/30'
(4) State = 0xf04fa9faf34aa423abe4e4c6bbb3ee47
(4) NAS-IP-Address = 10.XX.XX.123
(4) # Executing section authorize from file /etc/raddb/sites-enabled/
default
(4)   authorize {
(4)   filter_username filter_username {
(4)     if (!&User-Name)
(4)     if (!&User-Name)  -> FALSE
(4)     if (&User-Name =~ /@.*@/ )
(4)     if (&User-Name =~ /@.*@/ )  -> FALSE
(4)     if (&User-Name =~ /\\.\\./ )
(4)     if (&User-Name =~ /\\.\\./ )  -> FALSE
(4)     if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/))
(4)     if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/))   ->
FALSE
(4)     if (&User-Name =~ /\\.$/)
(4)     if (&User-Name =~ /\\.$/)   -> FALSE
(4)     if (&User-Name =~ /@\\./)
(4)     if (&User-Name =~ /@\\./)   -> FALSE
(4)   } # filter_username filter_username = notfound
(4)   [preprocess] = ok
(4)   [chap] = noop
(4)   [mschap] = noop
(4)   [digest] = noop
(4)  suffix : Checking for suffix after "@"
(4)  suffix : No '@' in User-Name = "Matthew West", looking up realm NULL
(4)  suffix : No such realm "NULL"
(4)   [suffix] = noop
(4)  eap : Peer sent code Response (2) ID 5 length 6
(4)  eap : No EAP Start, assuming it's an on-going EAP conversation
(4)   [eap] = updated
(4)   [files] = noop
(4)   [expiration] = noop
(4)   [logintime] = noop
(4)   [pap] = noop
(4)  } #  authorize = updated
(4) Found Auth-Type = EAP
(4) # Executing group from file /etc/raddb/sites-enabled/default
(4)   authenticate {
(4)  eap : Expiring EAP session with state 0xf04fa9faf34aa423
(4)  eap : Finished EAP session with state 0xf04fa9faf34aa423
(4)  eap : Previous EAP request found for state 0xf04fa9faf34aa423,
released from the list
(4)  eap : Peer sent method TLS (13)
(4)  eap : EAP TLS (13)
(4)  eap : Calling eap_tls to process EAP data
(4)  eap_tls : Authenticate
(4)  eap_tls : processing EAP-TLS
(4)  eap_tls : Received TLS ACK
(4)  eap_tls : Received TLS ACK
(4)  eap_tls : ACK handshake fragment handler
(4)  eap_tls : eaptls_verify returned 1
(4)  eap_tls : eaptls_process returned 13
(4)  eap : New EAP session, adding 'State' attribute to reply
0xf04fa9faf449a423
(4)   [eap] = handled
(4)  } #  authenticate = handled
(4) Sending Access-Challenge packet to host 10.XX.XX.123 port 1645,
id=1, length=0
(4) EAP-Message =
0x010600710d800000082b6563686e6f6c6f676965732c204c4c43204341
004e304c3120301e060355040a13175961616e6120546563686e6f6c6f67
6965732c204c4c43312830260603550403131f5961616e6120546563686e
6f6c6f676965732c204c4c43204341202d2047320e000000
(4) Message-Authenticator = 0x00000000000000000000000000000000
(4) State = 0xf04fa9faf449a423abe4e4c6bbb3ee47
Sending Access-Challenge Id 1 from 10.XX.1.122:1812 to 10.XX.XX.123:1645
EAP-Message = 0x010600710d800000082b6563686e6f6c6f676965732c204c4c43204341
004e304c3120301e060355040a13175961616e6120546563686e6f6c6f67
6965732c204c4c43312830260603550403131f5961616e6120546563686e
6f6c6f676965732c204c4c43204341202d2047320e000000
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xf04fa9faf449a423abe4e4c6bbb3ee47
(4) Finished request
Waking up in 0.2 seconds.
Received Access-Request Id 2 from 10.XX.XX.123:1645 to
10.XX.1.122:1812 length 1451
User-Name = 'Matthew West'
Service-Type = Framed-User
Framed-MTU = 1500
Called-Station-Id = '08-CC-68-D5-1F-1E'
Calling-Station-Id = 'AC-87-A3-33-1A-79'
EAP-Message = 0x020604fc0dc00000139016030111fa0b0011f60011f300076930820765
3082064da0030201020210181ddca644a326886c48039b989b0ef3300d06
092a864886f70d01010505003081c9310b3009060355040613025553311d
301b060355040a131453796d616e74656320436f72706f726174696f6e31
1f301d060355040b131653796d616e746563205472757374204e6574776f
726b31353033060355040b132c436c6173732032204d616e616765642050
4b4920496e646976696475616c2053756273637269626572204341314330
410603550403133a53796d616e74656320436c6173732032205368617265
6420496e7465726d65646961746520436572746966696361746520417574
686f72697479301e170d3136303230323030303030305a170d3138303230
313233353935395a30753115301306035504030c0c4d6174746865772057
657374310f300d060355040b0c06532f4d494d453120301e060355040a0c
175961616e6120546563686e6f6c6f676965732c204c4c43312930270609
2a864886f70d010901161a6d6174746865772e77657374407961616e6174
6563682e636f6d30820122300d06092a864886f70d01010105000382010f
003082010a0282010100d029e7e78636ab2bb56a797b548157f0b2854628
20c2c4e9e40e0d01bd6c9e94bdada6d32526d452f3511c6
Message-Authenticator = 0x94f42e70e2a693a04a98916fa170e48c
NAS-Port-Type = Ethernet
NAS-Port = 50130
NAS-Port-Id = 'GigabitEthernet1/0/30'
State = 0xf04fa9faf449a423abe4e4c6bbb3ee47
NAS-IP-Address = 10.XX.XX.123
(5) Received Access-Request packet from host 10.XX.XX.123 port 1645,
id=2, length=1451
(5) User-Name = 'Matthew West'
(5) Service-Type = Framed-User
(5) Framed-MTU = 1500
(5) Called-Station-Id = '08-CC-68-D5-1F-1E'
(5) Calling-Station-Id = 'AC-87-A3-33-1A-79'
(5) EAP-Message =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(5) Message-Authenticator = 0x94f42e70e2a693a04a98916fa170e48c
(5) NAS-Port-Type = Ethernet
(5) NAS-Port = 50130
(5) NAS-Port-Id = 'GigabitEthernet1/0/30'
(5) State = 0xf04fa9faf449a423abe4e4c6bbb3ee47
(5) NAS-IP-Address = 10.XX.XX.123
(5) # Executing section authorize from file /etc/raddb/sites-enabled/
default
(5)   authorize {
(5)   filter_username filter_username {
(5)     if (!&User-Name)
(5)     if (!&User-Name)  -> FALSE
(5)     if (&User-Name =~ /@.*@/ )
(5)     if (&User-Name =~ /@.*@/ )  -> FALSE
(5)     if (&User-Name =~ /\\.\\./ )
(5)     if (&User-Name =~ /\\.\\./ )  -> FALSE
(5)     if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/))
(5)     if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/))   ->
FALSE
(5)     if (&User-Name =~ /\\.$/)
(5)     if (&User-Name =~ /\\.$/)   -> FALSE
(5)     if (&User-Name =~ /@\\./)
(5)     if (&User-Name =~ /@\\./)   -> FALSE
(5)   } # filter_username filter_username = notfound
(5)   [preprocess] = ok
(5)   [chap] = noop
(5)   [mschap] = noop
(5)   [digest] = noop
(5)  suffix : Checking for suffix after "@"
(5)  suffix : No '@' in User-Name = "Matthew West", looking up realm NULL
(5)  suffix : No such realm "NULL"
(5)   [suffix] = noop
(5)  eap : Peer sent code Response (2) ID 6 length 1276
(5)  eap : No EAP Start, assuming it's an on-going EAP conversation
(5)   [eap] = updated
(5)   [files] = noop
(5)   [expiration] = noop
(5)   [logintime] = noop
(5)   [pap] = noop
(5)  } #  authorize = updated
(5) Found Auth-Type = EAP
(5) # Executing group from file /etc/raddb/sites-enabled/default
(5)   authenticate {
(5)  eap : Expiring EAP session with state 0xf04fa9faf449a423
(5)  eap : Finished EAP session with state 0xf04fa9faf449a423
(5)  eap : Previous EAP request found for state 0xf04fa9faf449a423,
released from the list
(5)  eap : Peer sent method TLS (13)
(5)  eap : EAP TLS (13)
(5)  eap : Calling eap_tls to process EAP data
(5)  eap_tls : Authenticate
(5)  eap_tls : processing EAP-TLS
  TLS Length 5008
(5)  eap_tls : Received EAP-TLS First Fragment of the message
(5)  eap_tls : eaptls_verify returned 9
(5)  eap_tls : eaptls_process returned 13
(5)  eap : New EAP session, adding 'State' attribute to reply
0xf04fa9faf548a423
(5)   [eap] = handled
(5)  } #  authenticate = handled
(5) Sending Access-Challenge packet to host 10.XX.XX.123 port 1645,
id=2, length=0
(5) EAP-Message = 0x010700060d00
(5) Message-Authenticator = 0x00000000000000000000000000000000
(5) State = 0xf04fa9faf548a423abe4e4c6bbb3ee47
Sending Access-Challenge Id 2 from 10.XX.1.122:1812 to 10.XX.XX.123:1645
EAP-Message = 0x010700060d00
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xf04fa9faf548a423abe4e4c6bbb3ee47
(5) Finished request
Waking up in 0.2 seconds.
Received Access-Request Id 3 from 10.XX.XX.123:1645 to
10.XX.1.122:1812 length 1451
User-Name = 'Matthew West'
Service-Type = Framed-User
Framed-MTU = 1500
Called-Station-Id = '08-CC-68-D5-1F-1E'
Calling-Station-Id = 'AC-87-A3-33-1A-79'
EAP-Message = 0x020704fc0d405630543052a050a04e864c687474703a2f2f706b692d63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Message-Authenticator = 0x953d6feb75b9e9aa0de007ccf402c872
NAS-Port-Type = Ethernet
NAS-Port = 50130
NAS-Port-Id = 'GigabitEthernet1/0/30'
State = 0xf04fa9faf548a423abe4e4c6bbb3ee47
NAS-IP-Address = 10.XX.XX.123
(6) Received Access-Request packet from host 10.XX.XX.123 port 1645,
id=3, length=1451
(6) User-Name = 'Matthew West'
(6) Service-Type = Framed-User
(6) Framed-MTU = 1500
(6) Called-Station-Id = '08-CC-68-D5-1F-1E'
(6) Calling-Station-Id = 'AC-87-A3-33-1A-79'
(6) EAP-Message =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(6) Message-Authenticator = 0x953d6feb75b9e9aa0de007ccf402c872
(6) NAS-Port-Type = Ethernet
(6) NAS-Port = 50130
(6) NAS-Port-Id = 'GigabitEthernet1/0/30'
(6) State = 0xf04fa9faf548a423abe4e4c6bbb3ee47
(6) NAS-IP-Address = 10.XX.XX.123
(6) # Executing section authorize from file /etc/raddb/sites-enabled/
default
(6)   authorize {
(6)   filter_username filter_username {
(6)     if (!&User-Name)
(6)     if (!&User-Name)  -> FALSE
(6)     if (&User-Name =~ /@.*@/ )
(6)     if (&User-Name =~ /@.*@/ )  -> FALSE
(6)     if (&User-Name =~ /\\.\\./ )
(6)     if (&User-Name =~ /\\.\\./ )  -> FALSE
(6)     if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/))
(6)     if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/))   ->
FALSE
(6)     if (&User-Name =~ /\\.$/)
(6)     if (&User-Name =~ /\\.$/)   -> FALSE
(6)     if (&User-Name =~ /@\\./)
(6)     if (&User-Name =~ /@\\./)   -> FALSE
(6)   } # filter_username filter_username = notfound
(6)   [preprocess] = ok
(6)   [chap] = noop
(6)   [mschap] = noop
(6)   [digest] = noop
(6)  suffix : Checking for suffix after "@"
(6)  suffix : No '@' in User-Name = "Matthew West", looking up realm NULL
(6)  suffix : No such realm "NULL"
(6)   [suffix] = noop
(6)  eap : Peer sent code Response (2) ID 7 length 1276
(6)  eap : No EAP Start, assuming it's an on-going EAP conversation
(6)   [eap] = updated
(6)   [files] = noop
(6)   [expiration] = noop
(6)   [logintime] = noop
(6)   [pap] = noop
(6)  } #  authorize = updated
(6) Found Auth-Type = EAP
(6) # Executing group from file /etc/raddb/sites-enabled/default
(6)   authenticate {
(6)  eap : Expiring EAP session with state 0xf04fa9faf548a423
(6)  eap : Finished EAP session with state 0xf04fa9faf548a423
(6)  eap : Previous EAP request found for state 0xf04fa9faf548a423,
released from the list
(6)  eap : Peer sent method TLS (13)
(6)  eap : EAP TLS (13)
(6)  eap : Calling eap_tls to process EAP data
(6)  eap_tls : Authenticate
(6)  eap_tls : processing EAP-TLS
(6)  eap_tls : More fragments to follow
(6)  eap_tls : eaptls_verify returned 10
(6)  eap_tls : eaptls_process returned 13
(6)  eap : New EAP session, adding 'State' attribute to reply
0xf04fa9faf647a423
(6)   [eap] = handled
(6)  } #  authenticate = handled
(6) Sending Access-Challenge packet to host 10.XX.XX.123 port 1645,
id=3, length=0
(6) EAP-Message = 0x010800060d00
(6) Message-Authenticator = 0x00000000000000000000000000000000
(6) State = 0xf04fa9faf647a423abe4e4c6bbb3ee47
Sending Access-Challenge Id 3 from 10.XX.1.122:1812 to 10.XX.XX.123:1645
EAP-Message = 0x010800060d00
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xf04fa9faf647a423abe4e4c6bbb3ee47
(6) Finished request
Waking up in 0.2 seconds.
Received Access-Request Id 4 from 10.XX.XX.123:1645 to
10.XX.1.122:1812 length 1451
User-Name = 'Matthew West'
Service-Type = Framed-User
Framed-MTU = 1500
Called-Station-Id = '08-CC-68-D5-1F-1E'
Calling-Station-Id = 'AC-87-A3-33-1A-79'
EAP-Message = 0x020804fc0d409d2d2cb02e3f18f329cd1a36898492c757705b7085e638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Message-Authenticator = 0xc1c5b9d576679e82e9b9d17928f09712
NAS-Port-Type = Ethernet
NAS-Port = 50130
NAS-Port-Id = 'GigabitEthernet1/0/30'
State = 0xf04fa9faf647a423abe4e4c6bbb3ee47
NAS-IP-Address = 10.XX.XX.123
(7) Received Access-Request packet from host 10.XX.XX.123 port 1645,
id=4, length=1451
(7) User-Name = 'Matthew West'
(7) Service-Type = Framed-User
(7) Framed-MTU = 1500
(7) Called-Station-Id = '08-CC-68-D5-1F-1E'
(7) Calling-Station-Id = 'AC-87-A3-33-1A-79'
(7) EAP-Message =
0x020804fc0d409d2d2cb02e3f18f329cd1a36898492c757705b7085e638
a17c50e3373888655b6bcb392a04b182aa1904ffa07f3fa3db91457666a3
6bf385235e4ed9855d75a7a015f7c10074e0e5ca9442659ac2377a8ba850
acbf97746777d132a7af8dcb93a92542b4301a740ae2251010cb7467550f
cb14fc41500aa47c4d0b0bf905a935f945a731f180bba2c93ece7639e12a
ff7650e7e85122df2dcfb8330203010001a382023f3082023b3012060355
1d130101ff040830060101ff02010030340603551d1f042d302b3029a027
a0258623687474703a2f2f63726c2e766572697369676e2e636f6d2f7063
61322d67332e63726c300e0603551d0f0101ff0404030201063029060355
1d1104223020a41e301c311a301806035504031311566572695369676e4d
504b492d322d3536301d0603551d0e04160414d84829a85f2a1792e2fa9e
7bef6f6083f8b8b8dc3081f00603551d230481e83081e5a181d0a481cd30
81ca310b300906035504061302555331173015060355040a130e56657269
5369676e2c20496e632e311f301d060355040b1316566572695369676e20
5472757374204e6574776f726b313a3038060355040b1331286329203139
393920566572695369676e2c20496e632e202d20466f7220617574686f72
697a656420757365206f6e6c79314530430603550403133c
(7) Message-Authenticator = 0xc1c5b9d576679e82e9b9d17928f09712
(7) NAS-Port-Type = Ethernet
(7) NAS-Port = 50130
(7) NAS-Port-Id = 'GigabitEthernet1/0/30'
(7) State = 0xf04fa9faf647a423abe4e4c6bbb3ee47
(7) NAS-IP-Address = 10.XX.XX.123
(7) # Executing section authorize from file /etc/raddb/sites-enabled/
default
(7)   authorize {
(7)   filter_username filter_username {
(7)     if (!&User-Name)
(7)     if (!&User-Name)  -> FALSE
(7)     if (&User-Name =~ /@.*@/ )
(7)     if (&User-Name =~ /@.*@/ )  -> FALSE
(7)     if (&User-Name =~ /\\.\\./ )
(7)     if (&User-Name =~ /\\.\\./ )  -> FALSE
(7)     if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/))
(7)     if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/))   ->
FALSE
(7)     if (&User-Name =~ /\\.$/)
(7)     if (&User-Name =~ /\\.$/)   -> FALSE
(7)     if (&User-Name =~ /@\\./)
(7)     if (&User-Name =~ /@\\./)   -> FALSE
(7)   } # filter_username filter_username = notfound
(7)   [preprocess] = ok
(7)   [chap] = noop
(7)   [mschap] = noop
(7)   [digest] = noop
(7)  suffix : Checking for suffix after "@"
(7)  suffix : No '@' in User-Name = "Matthew West", looking up realm NULL
(7)  suffix : No such realm "NULL"
(7)   [suffix] = noop
(7)  eap : Peer sent code Response (2) ID 8 length 1276
(7)  eap : No EAP Start, assuming it's an on-going EAP conversation
(7)   [eap] = updated
(7)   [files] = noop
(7)   [expiration] = noop
(7)   [logintime] = noop
(7)   [pap] = noop
(7)  } #  authorize = updated
(7) Found Auth-Type = EAP
(7) # Executing group from file /etc/raddb/sites-enabled/default
(7)   authenticate {
(7)  eap : Expiring EAP session with state 0xf04fa9faf647a423
(7)  eap : Finished EAP session with state 0xf04fa9faf647a423
(7)  eap : Previous EAP request found for state 0xf04fa9faf647a423,
released from the list
(7)  eap : Peer sent method TLS (13)
(7)  eap : EAP TLS (13)
(7)  eap : Calling eap_tls to process EAP data
(7)  eap_tls : Authenticate
(7)  eap_tls : processing EAP-TLS
(7)  eap_tls : More fragments to follow
(7)  eap_tls : eaptls_verify returned 10
(7)  eap_tls : eaptls_process returned 13
(7)  eap : New EAP session, adding 'State' attribute to reply
0xf04fa9faf746a423
(7)   [eap] = handled
(7)  } #  authenticate = handled
(7) Sending Access-Challenge packet to host 10.XX.XX.123 port 1645,
id=4, length=0
(7) EAP-Message = 0x010900060d00
(7) Message-Authenticator = 0x00000000000000000000000000000000
(7) State = 0xf04fa9faf746a423abe4e4c6bbb3ee47
Sending Access-Challenge Id 4 from 10.XX.1.122:1812 to 10.XX.XX.123:1645
EAP-Message = 0x010900060d00
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xf04fa9faf746a423abe4e4c6bbb3ee47
(7) Finished request
Waking up in 0.2 seconds.
Received Access-Request Id 5 from 10.XX.XX.123:1645 to
10.XX.1.122:1812 length 1381
User-Name = 'Matthew West'
Service-Type = Framed-User
Framed-MTU = 1500
Called-Station-Id = '08-CC-68-D5-1F-1E'
Calling-Station-Id = 'AC-87-A3-33-1A-79'
EAP-Message = 0x020904b80d00313030313030303030305a170d33363037313632333539
35395a3081ca310b300906035504061302555331173015060355040a130e
566572695369676e2c20496e632e311f301d060355040b13165665726953
69676e205472757374204e6574776f726b313a3038060355040b13312863
29203139393920566572695369676e2c20496e632e202d20466f72206175
74686f72697a656420757365206f6e6c79314530430603550403133c5665
72695369676e20436c6173732032205075626c6963205072696d61727920
43657274696669636174696f6e20417574686f72697479202d2047333082
0122300d06092a864886f70d01010105000382010f003082010a02820101
00af0a0dc2d52cdb67b92de59427dda5bee0b04d8fb361563cd67cc3f4cd
3e86cba288e2e1d8a469c5b5e2bfc1a647505e46398bd596bab56f14bf10
ce27139e05479b317a13d81fd9d302378bad2c47f08e8106a70d300cebf7
3c0f201ddc7246eea502c85bc3c956694cc518c1917b0bd513009bbcefc3
483e466020852ad590b6cd8ba0cc32ddb7fd4055b2501c56aecc8d774dc7
204da73176ef68928a901e088156b2ad69a352d0cb1cc4233d1f99fe4ce8
16638ec6088ef631f6d2fae576ddb51c92a349cdcd01cd68cda969baa3eb
1d0d9ca420a6c1a0c5d1464c176dd2ac663f968ce084d43
Message-Authenticator = 0xb5bed396e8075f3e329a22154cbf2c28
NAS-Port-Type = Ethernet
NAS-Port = 50130
NAS-Port-Id = 'GigabitEthernet1/0/30'
State = 0xf04fa9faf746a423abe4e4c6bbb3ee47
NAS-IP-Address = 10.XX.XX.123
(8) Received Access-Request packet from host 10.XX.XX.123 port 1645,
id=5, length=1381
(8) User-Name = 'Matthew West'
(8) Service-Type = Framed-User
(8) Framed-MTU = 1500
(8) Called-Station-Id = '08-CC-68-D5-1F-1E'
(8) Calling-Station-Id = 'AC-87-A3-33-1A-79'
(8) EAP-Message =
0x020904b80d00313030313030303030305a170d33363037313632333539
35395a3081ca310b300906035504061302555331173015060355040a130e
566572695369676e2c20496e632e311f301d060355040b13165665726953
69676e205472757374204e6574776f726b313a3038060355040b13312863
29203139393920566572695369676e2c20496e632e202d20466f72206175
74686f72697a656420757365206f6e6c79314530430603550403133c5665
72695369676e20436c6173732032205075626c6963205072696d61727920
43657274696669636174696f6e20417574686f72697479202d2047333082
0122300d06092a864886f70d01010105000382010f003082010a02820101
00af0a0dc2d52cdb67b92de59427dda5bee0b04d8fb361563cd67cc3f4cd
3e86cba288e2e1d8a469c5b5e2bfc1a647505e46398bd596bab56f14bf10
ce27139e05479b317a13d81fd9d302378bad2c47f08e8106a70d300cebf7
3c0f201ddc7246eea502c85bc3c956694cc518c1917b0bd513009bbcefc3
483e466020852ad590b6cd8ba0cc32ddb7fd4055b2501c56aecc8d774dc7
204da73176ef68928a901e088156b2ad69a352d0cb1cc4233d1f99fe4ce8
16638ec6088ef631f6d2fae576ddb51c92a349cdcd01cd68cda969baa3eb
1d0d9ca420a6c1a0c5d1464c176dd2ac663f968ce084d436
(8) Message-Authenticator = 0xb5bed396e8075f3e329a22154cbf2c28
(8) NAS-Port-Type = Ethernet
(8) NAS-Port = 50130
(8) NAS-Port-Id = 'GigabitEthernet1/0/30'
(8) State = 0xf04fa9faf746a423abe4e4c6bbb3ee47
(8) NAS-IP-Address = 10.XX.XX.123
(8) # Executing section authorize from file /etc/raddb/sites-enabled/
default
(8)   authorize {
(8)   filter_username filter_username {
(8)     if (!&User-Name)
(8)     if (!&User-Name)  -> FALSE
(8)     if (&User-Name =~ /@.*@/ )
(8)     if (&User-Name =~ /@.*@/ )  -> FALSE
(8)     if (&User-Name =~ /\\.\\./ )
(8)     if (&User-Name =~ /\\.\\./ )  -> FALSE
(8)     if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/))
(8)     if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/))   ->
FALSE
(8)     if (&User-Name =~ /\\.$/)
(8)     if (&User-Name =~ /\\.$/)   -> FALSE
(8)     if (&User-Name =~ /@\\./)
(8)     if (&User-Name =~ /@\\./)   -> FALSE
(8)   } # filter_username filter_username = notfound
(8)   [preprocess] = ok
(8)   [chap] = noop
(8)   [mschap] = noop
(8)   [digest] = noop
(8)  suffix : Checking for suffix after "@"
(8)  suffix : No '@' in User-Name = "Matthew West", looking up realm NULL
(8)  suffix : No such realm "NULL"
(8)   [suffix] = noop
(8)  eap : Peer sent code Response (2) ID 9 length 1208
(8)  eap : No EAP Start, assuming it's an on-going EAP conversation
(8)   [eap] = updated
(8)   [files] = noop
(8)   [expiration] = noop
(8)   [logintime] = noop
(8)   [pap] = noop
(8)  } #  authorize = updated
(8) Found Auth-Type = EAP
(8) # Executing group from file /etc/raddb/sites-enabled/default
(8)   authenticate {
(8)  eap : Expiring EAP session with state 0xf04fa9faf746a423
(8)  eap : Finished EAP session with state 0xf04fa9faf746a423
(8)  eap : Previous EAP request found for state 0xf04fa9faf746a423,
released from the list
(8)  eap : Peer sent method TLS (13)
(8)  eap : EAP TLS (13)
(8)  eap : Calling eap_tls to process EAP data
(8)  eap_tls : Authenticate
(8)  eap_tls : processing EAP-TLS
(8)  eap_tls : eaptls_verify returned 7
(8)  eap_tls : Done initial handshake
(8)  eap_tls : <<< TLS 1.0 Handshake [length 11fa], Certificate
(8)  eap_tls : chain-depth=2,
(8)  eap_tls : error=0
(8)  eap_tls : --> User-Name = Matthew West
(8)  eap_tls : --> BUF-Name = VeriSign Class 2 Public Primary
Certification Authority - G3
(8)  eap_tls : --> subject = /C=US/O=VeriSign, Inc./OU=VeriSign Trust
Network/OU=(c) 1999 VeriSign, Inc. - For authorized use
only/CN=VeriSign Class 2 Public Primary Certification Authority - G3
(8)  eap_tls : --> issuer  = /C=US/O=VeriSign, Inc./OU=VeriSign Trust
Network/OU=(c) 1999 VeriSign, Inc. - For authorized use
only/CN=VeriSign Class 2 Public Primary Certification Authority - G3
(8)  eap_tls : --> verify return:1
(8)  eap_tls : chain-depth=1,
(8)  eap_tls : error=0
(8)  eap_tls : --> User-Name = Matthew West
(8)  eap_tls : --> BUF-Name = Symantec Class 2 Shared Intermediate
Certificate Authority
(8)  eap_tls : --> subject = /C=US/O=Symantec Corporation/OU=Symantec
Trust Network/OU=Class 2 Managed PKI Individual Subscriber
CA/CN=Symantec Class 2 Shared Intermediate Certificate Authority
(8)  eap_tls : --> issuer  = /C=US/O=VeriSign, Inc./OU=VeriSign Trust
Network/OU=(c) 1999 VeriSign, Inc. - For authorized use
only/CN=VeriSign Class 2 Public Primary Certification Authority - G3
(8)  eap_tls : --> verify return:1
(8)  eap_tls : chain-depth=0,
(8)  eap_tls : error=0
(8)  eap_tls : --> User-Name = Matthew West
(8)  eap_tls : --> BUF-Name = Matthew West
(8)  eap_tls : --> subject = /CN=Matthew West/OU=S/MIME/O=ACME
Technologies, LLC/emailAddress=matthew.west@ACMEtech.com
(8)  eap_tls : --> issuer  = /C=US/O=Symantec Corporation/OU=Symantec
Trust Network/OU=Class 2 Managed PKI Individual Subscriber
CA/CN=Symantec Class 2 Shared Intermediate Certificate Authority
(8)  eap_tls : --> verify return:1
(8)  eap_tls : TLS_accept: SSLv3 read client certificate A
(8)  eap_tls : <<< TLS 1.0 Handshake [length 0046], ClientKeyExchange
(8)  eap_tls : TLS_accept: SSLv3 read client key exchange A
(8)  eap_tls : <<< TLS 1.0 Handshake [length 0106], CertificateVerify
(8)  eap_tls : TLS_accept: SSLv3 read certificate verify A
(8)  eap_tls : <<< TLS 1.0 ChangeCipherSpec [length 0001]
(8)  eap_tls : <<< TLS 1.0 Handshake [length 0010], Finished
(8)  eap_tls : TLS_accept: SSLv3 read finished A
(8)  eap_tls : >>> TLS 1.0 ChangeCipherSpec [length 0001]
(8)  eap_tls : TLS_accept: SSLv3 write change cipher spec A
(8)  eap_tls : >>> TLS 1.0 Handshake [length 0010], Finished
(8)  eap_tls : TLS_accept: SSLv3 write finished A
(8)  eap_tls : TLS_accept: SSLv3 flush data
  SSL: adding session
f334a0969557e364415cbfb4ba2bd54f418d1da5490524c1d394b8b9317942b4 to
cache
(8)  eap_tls : (other): SSL negotiation finished successfully
SSL Connection Established
(8)  eap_tls : eaptls_process returned 13
(8)  eap : New EAP session, adding 'State' attribute to reply
0xf04fa9faf845a423
(8)   [eap] = handled
(8)  } #  authenticate = handled
(8) Sending Access-Challenge packet to host 10.XX.XX.123 port 1645,
id=5, length=0
(8) EAP-Message =
0x010a00450d800000003b1403010001011603010030972b5880fa61a3a0
4063157ce9904c92c768a459de9a5c78d88c35317fef6da0ac3fb8387b9c
f365713237487d6b08c9
(8) Message-Authenticator = 0x00000000000000000000000000000000
(8) State = 0xf04fa9faf845a423abe4e4c6bbb3ee47
Sending Access-Challenge Id 5 from 10.XX.1.122:1812 to 10.XX.XX.123:1645
EAP-Message = 0x010a00450d800000003b1403010001011603010030972b5880fa61a3a0
4063157ce9904c92c768a459de9a5c78d88c35317fef6da0ac3fb8387b9c
f365713237487d6b08c9
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xf04fa9faf845a423abe4e4c6bbb3ee47
(8) Finished request
Waking up in 0.2 seconds.
Received Access-Request Id 6 from 10.XX.XX.123:1645 to
10.XX.1.122:1812 length 171
User-Name = 'Matthew West'
Service-Type = Framed-User
Framed-MTU = 1500
Called-Station-Id = '08-CC-68-D5-1F-1E'
Calling-Station-Id = 'AC-87-A3-33-1A-79'
EAP-Message = 0x020a00060d00
Message-Authenticator = 0x850755b28e3e4d3e4817c69f85326117
NAS-Port-Type = Ethernet
NAS-Port = 50130
NAS-Port-Id = 'GigabitEthernet1/0/30'
State = 0xf04fa9faf845a423abe4e4c6bbb3ee47
NAS-IP-Address = 10.XX.XX.123
(9) Received Access-Request packet from host 10.XX.XX.123 port 1645,
id=6, length=171
(9) User-Name = 'Matthew West'
(9) Service-Type = Framed-User
(9) Framed-MTU = 1500
(9) Called-Station-Id = '08-CC-68-D5-1F-1E'
(9) Calling-Station-Id = 'AC-87-A3-33-1A-79'
(9) EAP-Message = 0x020a00060d00
(9) Message-Authenticator = 0x850755b28e3e4d3e4817c69f85326117
(9) NAS-Port-Type = Ethernet
(9) NAS-Port = 50130
(9) NAS-Port-Id = 'GigabitEthernet1/0/30'
(9) State = 0xf04fa9faf845a423abe4e4c6bbb3ee47
(9) NAS-IP-Address = 10.XX.XX.123
(9) # Executing section authorize from file /etc/raddb/sites-enabled/
default
(9)   authorize {
(9)   filter_username filter_username {
(9)     if (!&User-Name)
(9)     if (!&User-Name)  -> FALSE
(9)     if (&User-Name =~ /@.*@/ )
(9)     if (&User-Name =~ /@.*@/ )  -> FALSE
(9)     if (&User-Name =~ /\\.\\./ )
(9)     if (&User-Name =~ /\\.\\./ )  -> FALSE
(9)     if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/))
(9)     if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\\.(.+)$/))   ->
FALSE
(9)     if (&User-Name =~ /\\.$/)
(9)     if (&User-Name =~ /\\.$/)   -> FALSE
(9)     if (&User-Name =~ /@\\./)
(9)     if (&User-Name =~ /@\\./)   -> FALSE
(9)   } # filter_username filter_username = notfound
(9)   [preprocess] = ok
(9)   [chap] = noop
(9)   [mschap] = noop
(9)   [digest] = noop
(9)  suffix : Checking for suffix after "@"
(9)  suffix : No '@' in User-Name = "Matthew West", looking up realm NULL
(9)  suffix : No such realm "NULL"
(9)   [suffix] = noop
(9)  eap : Peer sent code Response (2) ID 10 length 6
(9)  eap : No EAP Start, assuming it's an on-going EAP conversation
(9)   [eap] = updated
(9)   [files] = noop
(9)   [expiration] = noop
(9)   [logintime] = noop
(9)   [pap] = noop
(9)  } #  authorize = updated
(9) Found Auth-Type = EAP
(9) # Executing group from file /etc/raddb/sites-enabled/default
(9)   authenticate {
(9)  eap : Expiring EAP session with state 0xf04fa9faf845a423
(9)  eap : Finished EAP session with state 0xf04fa9faf845a423
(9)  eap : Previous EAP request found for state 0xf04fa9faf845a423,
released from the list
(9)  eap : Peer sent method TLS (13)
(9)  eap : EAP TLS (13)
(9)  eap : Calling eap_tls to process EAP data
(9)  eap_tls : Authenticate
(9)  eap_tls : processing EAP-TLS
(9)  eap_tls : Received TLS ACK
(9)  eap_tls : Received TLS ACK
(9)  eap_tls : ACK handshake is finished
(9)  eap_tls : eaptls_verify returned 3
(9)  eap_tls : eaptls_process returned 3
(9)  eap_tls : Saving session
f334a0969557e364415cbfb4ba2bd54f418d1da5490524c1d394b8b9317942b4 vps
0x7f995732fc00 in the cache
(9)  eap : Freeing handler
(9)   [eap] = ok
(9)  } #  authenticate = ok
(9) # Executing section post-auth from file /etc/raddb/sites-enabled/
default
(9)   post-auth {
(9)   [exec] = noop
(9)   remove_reply_message_if_eap remove_reply_message_if_eap {
(9)     if (&reply:EAP-Message && &reply:Reply-Message)
(9)     if (&reply:EAP-Message && &reply:Reply-Message)  -> FALSE
(9)    else else {
(9)     [noop] = noop
(9)    } # else else = noop
(9)   } # remove_reply_message_if_eap remove_reply_message_if_eap = noop
(9)  } #  post-auth = noop
(9) Sending Access-Accept packet to host 10.XX.XX.123 port 1645, id=6,
length=0
(9) MS-MPPE-Recv-Key =
0xfaa281c3617f3014221f9d701eb760e7849e6c93550f52b2a05cc943c79a2b4e
(9) MS-MPPE-Send-Key =
0x108a6022d883528237ae8c72beadde69a362e94c7a836f4af3159783f038c3e5
(9) EAP-MSK = 0xfaa281c3617f3014221f9d701eb760e7849e6c93550f52b2a05cc943c7
9a2b4e108a6022d883528237ae8c72beadde69a362e94c7a836f4af3159783f038c3e5
(9) EAP-EMSK = 0x6480d679d4e11b6cdc2526aa3105
29e3221d573bba71d705aa779dae0e33968bae4d88c840ff91facd7e6dfd
a0c53b311a9f24279eddab746cf21cbd089187a9
(9) EAP-Session-Id =
0x0d57d1d43ecd441f115e1ec3d0d32af15b2732f7a02aa95c91b6a65096
6deab46b57d1dd45939c6a0dee55299d21b5463464981d5fb34fdd834e6e335f1d618323
(9) EAP-Message = 0x030a0004
(9) Message-Authenticator = 0x00000000000000000000000000000000
(9) User-Name = 'Matthew West'
Sending Access-Accept Id 6 from 10.XX.1.122:1812 to 10.XX.XX.123:1645
MS-MPPE-Recv-Key =
0xfaa281c3617f3014221f9d701eb760e7849e6c93550f52b2a05cc943c79a2b4e
MS-MPPE-Send-Key =
0x108a6022d883528237ae8c72beadde69a362e94c7a836f4af3159783f038c3e5
EAP-Message = 0x030a0004
Message-Authenticator = 0x00000000000000000000000000000000
User-Name = 'Matthew West'
(9) Finished request
Waking up in 0.1 seconds.
Waking up in 4.5 seconds.
(0) Cleaning up request packet ID 253 with timestamp +98
(1) Cleaning up request packet ID 254 with timestamp +98
(2) Cleaning up request packet ID 255 with timestamp +98
(3) Cleaning up request packet ID 0 with timestamp +98
(4) Cleaning up request packet ID 1 with timestamp +98
(5) Cleaning up request packet ID 2 with timestamp +98
(6) Cleaning up request packet ID 3 with timestamp +98
(7) Cleaning up request packet ID 4 with timestamp +98
(8) Cleaning up request packet ID 5 with timestamp +98
(9) Cleaning up request packet ID 6 with timestamp +98
Ready to process requests
On Thu, Aug 25, 2016 at 10:54 AM, Matthew West <matthew.t.west@gmail.com>
wrote:
...
Hi Alan,
...
For 802.1X is a closed loop system. Only those clients authing against
you should trust you, this they can be configured to trust you. ..knowing
your CA. If you use a public CA then anyone else can get a cert signed by
that CA for small change, they can then do eg evil twin etc attacks and
badly configured clients will auth against them. ..thus giving them the
users password (or easily cloud cracked mschap challenge/response)... many
clients have basic security...eg only trust the CA. So local CA is the one
way to ensure lowest common denominator is secure.
So the client would trust anyone holding a cert issued by the root CA?
 That's not good.
...
Also there are requirements/flags in the root CA and server CA for
RADIUS clients. ....and several clients do not work with wildcard server
certs in RADIUS land (Note, you don't need a cert per RADIUS server either
if its the same service)
Fun.  So at this point, I'm looking at either MS-CHAPv2 tied to an AD
server, using 3rd party server cert, or using self-signed certs for
authentication.  When using self-signed/generated certs, if I have
multiple locations with a RADIUS server at each location, can I use
the same user and ca certs across locations so users can roam?  Each
RADIUS server should have it's own server certificate, though,
correct?
I'm trying to understand feasibility here.  My directive was: wired
802.1X with existing user certs.
I've been doing network-specific work for the last decade (Firewalls,
routers, switches, load balancers, APs, etc.), so please excuse any
systems-specific knowledge I'm missing.  All my 802.1X work previously
was using AD, so I'm also new to using certs for network auth as well.
Thanks for your time, Alan.  I'm going back to the drawing board to
see what direction is best pursued.
Thank you,
Matthew
On Thu, Aug 25, 2016 at 10:36 AM, Alan Buxey <A.L.M.Buxey@lboro.ac.uk>
wrote:
...
For 802.1X is a closed loop system. Only those clients authing against
you
should trust you, this they can be configured to trust you. ..knowing
your
CA. If you use a public CA then anyone else can get a cert signed by
that CA
for small change, they can then do eg evil twin etc attacks and badly
configured clients will auth against them. ..thus giving them the users
password (or easily cloud cracked mschap challenge/response)... many
clients
have basic security...eg only trust the CA. So local CA is the one way
to
ensure lowest common denominator is secure. Couple this with other
things -
eg if you use a public CA you are a slave to THEIR server timeframes,
policies etc. If that root becomes intermediate or the CA gets revoked
by
the OS your service is hosed. Also there are requirements/flags in the
root
CA and server CA for RADIUS clients. ....and several clients do not work
with wildcard server certs in RADIUS land
(Note, you don't need a cert per RADIUS server either if its the same
service)
Don't just take my word for it, its Best Common Practice to not use
public
CAs - ask one of the main RADIUS RFC authors ;)
alan
Hello Mattew,

You are probably confusing with your past expirience with SSL certificates
used for web sites or email servers. In that cases the certificate was used
to validate ownership of domain name you are connecting to. In case of WLAN
there are no domain names hierarchy and there are nothing to validate. I
hope one day standard will allow us to acknowledge SSID ownership, but
AFAIK there are no such option now. So either you are installing your own
CA everywhere and force all your WLAN clients to validate EAP-TTLS
handshakes using it, or your users can send their weak hashes (NTLM, MD5)
and even plaintext passwords (PAP) to the spoofed WLAN with same SSID.

Dear FR users, please, correct me if i've mistaken above.

Thank you.

-- 
Bogdan Rudas
Head of Minsk IT Support Department
Exadel Inc.
http://www.exadel.com/
E-mail: brudas@exadel.com
Skype ID: bogdan.rudas

-- 

CONFIDENTIALITY NOTICE: This email and files attached to it are 
confidential. If you are not the intended recipient you are hereby notified 
that using, copying, distributing or taking any action in reliance on the 
contents of this information is strictly prohibited. If you have received 
this email in error please notify the sender and delete this email.