Make sure you handle the Digest problem first. This error means you are selecting an auth-type of 'digest' for the user's authentication request but you don't have the rlm_digest module configured. Look in doc/rlm_digest in the source tree on how to configure this module, what it does, etc... Good luck. Chris Carver Pennswoods.net Network Engineer raviprakash sunkara wrote:
Hello Everybody,
I'm working on openser, recently I install freeradius for "AAA".
By seeing the Documentation from " http://openser.org/docs/openser-radius-1.0.x.html " I followed that.
While testing the radius server by ' radiusd -X " its shows
radiusd.conf[1840] unknown Auth-type " Digest" in authenticate section ---> what its means.
And also
By Typing '" radtest 444 444 192.168.2.55 <http://192.168.2.55> 1812 radiustest " its shows below one.
Sending Access-Request of id 236 to 192.168.2.55 <http://192.168.2.55> port 1812 User-Name = "444" User-Password = "444" NAS-IP-Address = 255.255.255.255 <http://255.255.255.255> Re-sending Access-Request of id 236 to 192.168.2.55 <http://192.168.2.55> port 1812 User-Name = "444" User-Password = "444" NAS-IP-Address = 255.255.255.255 <http://255.255.255.255>
What its means one . Is it error ?
I run this in my box . where in my box installed openser , freeradius and radiusclinet-ng..
Please help me and main thing is, Is any mistakes in my english please excuse me..
-- Thanks and Regards with cheers Sunkara Ravi Prakash (Voip Developer) ravi.sunkara@hyperion-tech.com <mailto:ravi.sunkara@hyperion-tech.com> Hyperion Technology www.hyperion-tech.com <http://www.hyperion-tech.com> ------------------------------------------------------------------------
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html