Did you enable the WiMax module? David From: freeradius-users-bounces+davidp=wirelessconnections.net@lists.freeradius.org [mailto:freeradius-users-bounces+davidp=wirelessconnections.net@lists.freera dius.org] On Behalf Of Mulindwa Sent: Monday, March 05, 2012 6:16 AM To: freeradius-users@lists.freeradius.org Subject: RE: Wimax with Free radius Hallo there, i have an issue with my wimax setup, am trying to have my users authenticate using the wonderful freeradius but still failing. Am suing WASN9970 and using freeradius 2.1.12, When i turn on radius using radius-X, this is what i get, and client never authenticates someone please come to my rescue istening on authentication address 127.0.0.1 port 18120 as server inner-tunnel Listening on proxy address * port 1814 Ready to process requests. rad_recv: Access-Request packet from host 196.0.4.18 port 1812, id=250, length=187 User-Name = "gulucdp@utmax" NAS-IP-Address = 192.168.224.70 Calling-Station-Id = "6416f00100e1" NAS-Identifier = "WASN9770" Event-Timestamp = "Mar 5 2012 09:14:53 EAT" EAP-Message = 0x020100120167756c756364704075746d6178 WiMAX-Release = "1.1" WiMAX-Accounting-Capabilities = Flow-Based WiMAX-BS-Id = 0x303030303038316235393030 WiMAX-GMT-Timezone-offset = 10800 NAS-Port-Type = Wireless-802.16 WiMAX-Available-In-Client = 3 Service-Type = Framed-User Message-Authenticator = 0x143b601c01eca1d4595511b0a81c0d78 # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok [auth_log] expand: /usr/local/var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d -> /usr/local/var/log/radius/radacct/196.0.4.18/auth-detail-20120305 [auth_log] /usr/local/var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /usr/local/var/log/radius/radacct/196.0.4.18/auth-detail-20120305 [auth_log] expand: %t -> Mon Mar 5 08:59:56 2012 ++[auth_log] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop ++[wimax] returns ok [suffix] Looking up realm "utmax" for User-Name = "gulucdp@utmax" [suffix] Found realm "utmax" [suffix] Adding Realm = "utmax" [suffix] Authentication realm is LOCAL. ++[suffix] returns ok [eap] EAP packet type response id 1 length 18 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated [files] users: Matched entry DEFAULT at line 125 ++[files] returns ok ++[expiration] returns noop ++[logintime] returns noop Found Auth-Type = EAP # Executing group from file /usr/local/etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] EAP Identity [eap] processing type md5 rlm_eap_md5: Issuing Challenge ++[eap] returns handled Sending Access-Challenge of id 250 to 196.0.4.18 port 1812 Service-Type = Framed-User Framed-Protocol = PPP Framed-Address = 255.255.255.254 Framed-Netmask = 255.255.255.255 EAP-Message = 0x0102001604101bd377e252fa3b4f59a9210cb6a3fdfb Message-Authenticator = 0x00000000000000000000000000000000 State = 0x0dc4c5bf0dc6c1ff885e3d68e8e55b4e Finished request 0. Eric M