Ok, no problem, I understand. Finally when I go to the 'check server' page on the dialup admin page, what am I meant to see? The only thing I see is below Tuesday, 8 May 2012, 11:28:20 EST Server: radius:1812 (test user test) -----Original Message----- From: freeradius-users-bounces+shawkys=ivox.com.au@lists.freeradius.org [mailto:freeradius-users-bounces+shawkys=ivox.com.au@lists.freeradius.org] On Behalf Of Fajar A. Nugraha Sent: Tuesday, 8 May 2012 11:40 AM To: FreeRadius users mailing list Subject: Re: NAS Client On Tue, May 8, 2012 at 8:24 AM, Shawky Skaff <shawkys@ivox.com.au> wrote:
Ok I see, if I wanted to test a user on the radius client (cisco), am I not able to use radtest?
If by "test user" you mean "you've created a user on db/users file, and want to test if the user is correctly setup (e.g.whether the password is correct)", then you can use radtest to localhost. By default 127.0.0.1 is already setup as client NAS on clients.conf. Note that it doesn't really have anything to do with "cisco": the same user will be usable on any NAS that authenticates to the radius server. If by "test user" you mean you want to check whether the cisco box is setup correctly, and whether you can login on that NAS, then you can't use radtest. You need to actually login on that NAS (e.g. using 802.1x wired/wireless, or whatever). -- Fajar - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html