Thank you for your quick answer. I just change to peap in the eap.conf but i still have the same error. Maybe i'll send an email to the maintener of the paquet. I also tried to compile the last version of FreeRadius from sources but i was running into a lot of bugs... ----- Mail Original ----- De: "Alan Buxey" <A.L.M.Buxey@lboro.ac.uk> À: "FreeRadius users mailing list" <freeradius-users@lists.freeradius.org> Envoyé: Mercredi 6 Juillet 2011 13h22:55 GMT +01:00 Amsterdam / Berlin / Berne / Rome / Stockholm / Vienne Objet: Re: Freeradius 2.0.5 simple configuration fail Hi,
I'm currently trying to set a Freeradius 2.0.5 on a synology NAS which I installed via ipkg. I would like to authenticate the wifi users throught a netgear WG103 '802.1x enabled'. So i've just modified the users file to add a 'rad' user : "rad Cleartext-Password := "rad"" And added in clients.conf : client 10.1.1.16 { secret = ap_pass shortname = ap } I configured the ap according to these settings. Everything works fine when using radtest, but when trying to authenticate with the ap, i get the debug output that I put in attached file.
firstly, 2.0.5 is hideously old - and very very buggy. 2.1.x should be a minimum. can you get your package folk to upgrade their FreeRADIUS package? secondly, change your default eap type in the eap.conf to peap - you seem to have md5 which means a lot of NAK junk - this streamlines EAP. you cant do md5 with wireless.
I suppose the problem comes from : "auth: No authenticate method (Auth-Type) configuration found for the request: Rejecting the user auth: Failed to validate the user."
from a quick look i'd say things should be okay - make the EAP change and see if the AP plays nicely alan - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html